2 Fluke Corporation Fluke TiS Building Diagnostic Thermal Imaging Scanner - United States and Canada
Detailed specifications
TiS
Temperature
Temperature measurement range
(not calibrated below -10 °C) -20 °C to +100 °C (-4 °F to +212 °F)
Temperature measurement accuracy ± 5 °C or 5 % (at 25 °C nominal, whichever is greater)
Imaging performance
Image capture frequency 9 Hz refresh rate
Detector type 120 X 120 Focal Plane Array, uncooled microbolometer
Thermal sensitivity (NETD) ≤ 0.1 °C at 30 °C target temp. (100 mK)
Infrared spectral band 7.5 µm to 14 µm (long wave)
Standard infrared lens type
Field of view: 17° x 17°
Spatial resolution: (IFOV) 2.50 mRad
Minimum focus distance: 15 cm (approx. 6 in)
Focus mechanism Versatile, one-handed manual focus
Image presentation
Palettes Ironbow, Blue-Red, Grayscale
Level and span Smooth auto-scaling and lock of level and span
Minimum span (in auto mode) 5 °C (9 °F)
Image capture, review, save mechanism One-handed image capture, review, and save capability
Storage medium SD Memory Card (2 GB memory card will store at least 1200 fully radiometric (.is2)
IR images annotations, or 3000 basic bitmap (.bmp) images, transferrable to PC via included
multi-format USB card reader
File formats Non-radiometric (.bmp) or fully-radiometric (.is2)
No analysis software required for non-radiometic bitmap (.bmp) files
Export file formats w/SmartView® software BMP, DIB, GIF, JPE, JFIF, JPEG, JPG, PNG, TIF, and TIFF
Memory review Sequential image navigation and review
General specifications
Operating temperature -10 °C to +50 °C (14 °F to 122 °F)
Storage temperature -20 °C to +50 °C (-4 °F to 122 °F) without batteries
Relative humidity 10 % to 95 % non-condensing
Display 9.3 cm (3.7 in)
Controls and adjustments User selectable temperature scale (°C/°F)
Language selection
Time/Date set
User selectable backlight: “Full Bright” or “Auto”
Software SmartView® full analysis and reporting software included
Batteries Internal rechargeable battery pack (included)
Battery life Three to four hours continuous use (assumes 50 % brightness of LCD)
Battery charge time 2.5 hours to full charge
AC battery charging AC adapter/charger (110 V ac to 220 V ac, 50/60 Hz) (included), charges battery while imager
is operating or turned off, ac mains adapters included
AC operation AC operation with included power supply (110 V ac to 220 V ac, 50/60 Hz), ac mains
adapters included
Power saving Sleep mode activated after five minutes of inactivity, automatic power off after 30 minutes of
inactivity
Safety standards CSA (US and CAN): C22.2 No. 61010-1-04, UL: UL STD 61010-1 (2nd Edition), ISA: 82.02.01
Electromagnetic compatibility Meets all applicable requirements in EN61326-1:2006
C Tick IEC/EN 61326-1
US FCC CFR 47, Part 15 Class B
Vibration 0.03 g2/Hz (3.8 grms), IEC 68-2-6
Shock 25 g, IEC 68-2-29
Drop 2 meter (6.5 feet)
Size (H x W x L) 26.7 cm x 12.7 cm x 15.2 cm (10.5 in x 5.0 in x 6.0 in)
Weight (battery included) 1.2 kg (2.6 lb)
Enclosure rating IP54 (protected against dust, limited ingress; protection against water spray from
all directions)
Warranty Two-years (standard)
Recommended calibration cycle Two-years (assumes normal operation and normal aging)
Supported Languages Czech, English, Finnish, French, German, Italian, Japanese, Korean, Polish, Portuguese,
Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese, Turkish, and
(Dutch and Hungarian in manual only)