DATA SHEET SILICON POWER TRANSISTOR 2SA1010 PNP SILICON EPITAXIAL TRANSISTOR FOR HIGH-VOLTAGE HIGH-SPEED SWITCHING The 2SA1010 is a mold power transistor developed for high- PACKAGE DRAWING (UNIT: mm) voltage high-speed switching, and is ideal for use as a driver in devices such as switching regulators, DC/DC converters, and highfrequency power amplifiers. FEATURES * Low collector saturation voltage * Fast switching speed * Complementary transistor: 2SC2334 ABSOLUTE MAXIMUM RATINGS (Ta = 25C) Parameter Symbol Ratings Unit Collector to base voltage VCBO -100 V Collector to emitter voltage VCEO -100 V Emitter to base voltage VEBO -7.0 V Collector current (DC) IC(DC) -7.0 A IC(pulse)* -15 A IB(DC) -3.5 A Total power dissipation PT (Tc = 25 C) 40 W Total power dissipation PT (Ta = 25 C) 1.5 W Junction temperature Tj 150 C Storage temperature Tstg -55 to +150 C Collector current (pulse) Base current (DC) Pin Connection * PW 300 s, duty cycle 10% The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. Document No. D16118EJ2V0DS00 Date Published April 2002 N CP(K) Printed in Japan (c) 2002 2SA1010 ELECTRICAL CHARACTERISTICS (Ta = 25C) Parameter Symbol Conditions MIN. TYP. MAX. Collector to emitter voltage VCEO(SUS) IC = -5.0 A, IB1 = -0.5 A, L = 1 mH -100 V Collector to emitter voltage VCEX(SUS)1 IC = -5.0 A, IB1 = -IB2 = -0.5 A, VBE(OFF) = 5.0 V, L = 180 H, clamped -100 V Collector to emitter voltage VCEX(SUS)2 IC = -10 A, IB1 = -1.0 A, IB2 = -0.5 A, VBE(OFF) = 5.0 V, L = 180 H, clamped -100 V Collector cutoff current ICBO VCB = -100 V, IE = 0 -10 A Collector cutoff current ICER VCE = -100 V, RBE = 51 , Ta = 125 C -1.0 mA Collector cutoff current ICEX1 VCE = -100 V, VBE(OFF) = 1.5 V -10 A Collector cutoff current ICEX2 VCE = -100 V, VBE(OFF) = 1.5 V, Ta = 125 C -1.0 mA Emitter cutoff current IEBO VEB = -5.0 V, IC = 0 -10 A DC current gain hFE1 VCE = -5.0 V, IC = -0.5 A* 40 200 DC current gain hFE2 VCE = -5.0 V, IC = -3.0 A* 40 200 DC current gain hFE3 VCE = -5.0 V, IC = -5.0 A* 20 Collector saturation voltage VCE(sat) IC = -5.0 A, IB = -0.5 A* -0.6 V Base saturation voltage VBE(sat) IC = -5.0 A, IB = -0.5 A* -1.5 V IC = -5.0 A, RL = 10 , IB1 = -IB2 = -0.5 A, VCC -50 V 0.5 s 1.5 s 0.5 s Turn-on time ton Storage time tstg Refer to the test circuit. Fall time tf * Pulse test PW 350 s, duty cycle 2% hFE CLASSIFICATION Marking M L K hFE2 40 to 80 60 to 120 100 to 200 2 mm aluminum board, no insulating board, grease coating, natural air cooling With infinite heatsink Ambient Temperature Ta (C) Collector Current IC (A) Total Power Dissipation PT (W) TYPICAL CHARACTERISTICS (Ta = 25C) 2 Unit Collector to Emitter Voltage VCE (V) Data Sheet D16118EJ2V0DS Base Saturation Voltage VBE(sat) (V) Collector Saturation Voltage VCE(sat) (V) DC Current Gain hFE Collector Current IC (A) Collector Current IC (A) Transient Thermal Resistance th(j-c) (C/W) IC Derating dT (%) 2SA1010 Case Temperature TC (C) Pulse Width PW (ms) Collector to Emitter Voltage VCE (V) Collector to Emitter Voltage VCE (V) Collector Current IC (A) Collector Current IC (A) Data Sheet D16118EJ2V0DS 3 Turn-On Time ton (s) StorageTime tstg (s) Fall Time tf (s) 2SA1010 Collector Current IC (A) Base current waveform Collector current waveform 4 Data Sheet D16118EJ2V0DS 2SA1010 [MEMO] Data Sheet D16118EJ2V0DS 5 2SA1010 * The information in this document is current as of July, 2001. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4