Ecliptek Corporaon 3545 Cadillac Ave., Costa Mesa, CA 92626 1-800-ECLIPTEK or 714.433.1200
PART NUMBER DATA SHEET
144
EP13E7D2H-14.7456M TR
ELECTRICAL SPECIFICATIONS
Nominal Frequency 14.7456MHz
Frequency Tolerance/Stability ±50ppm Maximum over -20°C to +70°C (Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability
over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25°, 260°C
Reflow, Shock, and Vibration)
Aging at 25°C ±5ppm/Year Maximum
Supply Voltage 3.3Vdc ±5%
Input Current 12mA Maximum
Output Voltage Logic High (Voh) 90% of Vdd Minimum (IOH = -8mA)
Output Voltage Logic Low (Vol) 10% of Vdd Maximum (IOL = +8mA)
Rise/Fall Time 6nSec Maximum (Measured at 20% to 80% of waveform)
Duty Cycle 50 ±5(%) (Measured at 50% of waveform)
Load Drive Capability 30pF Maximum
Output Logic Type CMOS
Pin 1 Connection Tri-State
Pin 1 Input Voltage (Vih and Vil) 90% of Vdd Minimum or No Connect to Enable Output, 10% of Vdd Maximum to Disable Output
Disable Current 8mA Maximum (Pin 1 = Ground)
Absolute Clock Jitter 350pSec Maximum
Start Up Time 10mSec Maximum
Storage Temperature Range -55°C to 125°C
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
ESD Susceptibility MIL-STD-883, Method 3015, Class 1, HBM: 1500Vdc
Fine Leak Test MIL-STD-883, Method 1014, Condition A
Gross Leak Test MIL-STD-883, Method 1014, Condition C
Mechanical Shock MIL-STD-883, Method 2002, Condition B
Moisture Resistance MIL-STD-883, Method 1004
Moisture Sensitivity J-STD-020, MSL 1
Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K
Resistance to Solvents MIL-STD-202, Method 215
Solderability MIL-STD-883, Method 2003
Temperature Cycling MIL-STD-883, Method 1010, Condition B
Thermal Shock MIL-STD-883, Method 1011, Condition B
Vibration MIL-STD-883, Method 2007, Condition A
www.ecliptek.com | Specification Subject to Change Without Notice | Revision H 12/11/2012 | Page 1 of 7