Resistors Double-Sided Make Possible Chip Resistors Double-Sided Chip Resistors Welwyn Components DSC Series DSC Series Two parallel resistance elements in a single chip Two parallel resistance elements Excellent pulse withstand performance in a single chip Laser trimmed up to 0.5% tolerance Excellent pulse withstand performance Enhanced working voltage Laser trimmed up to 0.5% tolerance Enhanced power rating Enhanced working voltage Pb-free terminations Enhanced Anti-sulphurpower versionrating available. Pb-free terminations All Pb-free parts comply with EU Directive 2011/65/EU (RoHS2) Electrical Data 0805 1206 2010 2512 Power @70C Watts 0.25 0.33 0.75 1.5 2 second overload power @25C Watts 1.6 2.1 4.7 9.4 Ohms 1R0 to 1M0 Short pulse performance See graphs Resistance range Tolerance 1R0 to 4M7 % LEV Volts TCR ppm/C Operating temperature 10R to 1M: 0.5, All values: 1, 5 200 150 C Volts Thermal Impedance C/W 210 mm 40 Pad & trace area for rated power* 500 -55 to +155 Dielectric withstand voltage 2 400 <10R:200 > _10R:100 500 Values 160 80 50 50 60 100 E24 or 96 preferred - other values to special order Physical Data * Recommended minimum pad & adjacent trace area for each termination for rated power dissipation on FR4 PCB Dimensions (mm) & Weight (g) 0805 L W T max A B min C Wt. 2.00.3 1.250.2 0.7 0.30.15 0.9 0.30.15 0.012 1206 3.20.4 1.60.2 0.7 0.40.2 1.7 0.40.15 0.020 2010 5.10.3 2.50.2 0.8 0.60.3 3.0 0.60.25 0.036 2512 6.50.3 3.20.2 0.8 0.60.3 4.4 0.60.25 0.055 C T A B L A W Wrap-around terminations (3 faces) Construction Thick film resistor material, overglaze and organic protection are screen printed on a 96% alumina substrate. Wrap-around terminations have an electroplated nickel barrier and Pb-free solderable coating, this ensures excellent `leach' resistance properties and solderability. Marking Components are not marked. Reels are marked with type, value, tolerance, date code and quantity. Solvent Resistance The body protection is resistant to all normal industrial cleaning solvents suitable for printed circuits. GeneralNote Note General Welwyn Components reserves right to make changesspecification in product without specification notice or liability. TT Electronics reserves the right tothe make changes in product noticewithout or liability. All information is subject to Welwyn's own data and is considered accurate at time of going to print. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. (c) Welwyn Components Limited * Bedlington, Northumberland NE22 7AA, UK (c) TT Electronics plc 822181 * Facsimile: +44 (0) 1670 829465 * Email: info@welwyn-tt.com * Website: www.welwyn-tt.com Telephone: +44 (0) 1670 A subsidiary of TT electronics plc www.ttelectronicsresistors.com 04. 08 07.14 Double Sided Double Sided Chip ChipResistors Resistors Make Possible Welwyn Components DSC Series DSC Series Performance Data Load at rated power: 1000 hours at 70C R% Derating from rated power at 70C R% Maximum Typical 1 0.25 Zero at 155C Overload: 6.25 x rated power for 2 seconds 1 0.1 Shelf life test: 12 months at room temperature R% 0.1 0.02 Dry heat: 1000 hours at 155C R% 1 0.2 Long term damp heat R% 1 0.25 Temperature rapid change R% 0.25 0.05 0.25 0.05 Resistance to sulphur-bearing gas (AS version only): ASTMB-809 Note: A 0.01 Ohm addition to be added to the performance of all resistors <10 Ohms. Pulse Performance Data Lightning Surge shapes. 10 pulses are applied. The limit of acceptance is a shift in resistance of less than 1% from the initial value. 1.2/50s Lightning Surge 10,000 2512 2010 1206 0805 1,000 Peak Voltage (V) Resistors are tested in accordance with IEC 60 115-1 using both 1.2/50s and 10/700s pulse 100 10 1 10 100 1,000 10,000 100,000 Value (ohms) 1,000,000 10,000,000 10/700s Lightning Surge 10,000 2512 2010 Peak Voltage (V) 1,000 1206 0805 100 10 10 100 1,000 10,000 Value (ohms) 100,000 1,000,000 10,000,000 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. (c) Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK All information subject TT Electronics' own data is considered time of going to print.* Website: www.welwyn-tt.com Telephone: +44is (0) 1670to822181 * Facsimile: +44 and (0) 1670 829465accurate * Email: at info@welwyn-tt.com 07. 08 www.ttelectronicsresistors.com (c) TT Electronics plc 07.14 Double Sided Double Sided ChipResistors Resistors Chip Make Possible DSC Series DSC Series DSC2512 - Bellcore GR1089 Lightning Surge 10,000 2/10s Peak Voltage (V) 10/1000s 1,000 100 1 10 100 1,000 10,000 100,000 1,000,000 10,000,000 Value (ohms) Single Pulse Single Pulse 1000 100 Peak Power (W) The single impulse graph is the result of 50 impulses of rectangular shape applied at one-minute intervals. The limit of acceptance was a shift in resistance of less than 1% from the initial value. 2512 10 2010 1206 0805 1 0.0001 0.001 0.01 Pulse Duration (s) 0.1 1 Continuous Load Due to Repetitive Pulses The continuous load graph was obtained by applying repetitive Continuous Pulses 1000 rectangular pulses where the pulse period was adjusted so that the 100 Peak Power (W) average power dissipated in the resistor was equal to its rated power at 70C. Again the limit of acceptance was a shift in resistance of less than 1% from the initial value. 10 2512 2010 1206 1 0805 0.1 0.0001 0.001 0.01 Pulse Duration (s) 0.1 1 General Note TT the right to make changesBedlington, in product specification without notice or liability. (c) Electronics Welwynreserves Components Limited Northumberland NE22 7AA, UK All information is subject to 822181 TT Electronics' own data considered time of going to print.* Website: www.welwyn-tt.com Telephone: +44 (0) 1670 * Facsimile: +44and (0) is 1670 829465accurate * Email:atinfo@welwyn-tt.com 07.08 www.ttelectronicsresistors.com (c) TT Electronics plc 07.14 Double Sided Double Sided Chip ChipResistors Resistors Make Possible Welwyn Components DSC DSCSeries Series Thermal Performance Data Temperature Derating Curve % of Rated Power 125 100 75 50 25 0 -15 70 155 Ambient Temperature/C Temperature Rise Curves 80 2512 Temperature Rise ( C) 70 2010 60 0805 50 1206 40 30 20 10 0 0 0.5 1 Power Dissipation (W) 1.5 Packaging 0805 and1206 DSC series resistors are supplied on 8mm carrier tape and 7 inch reels as per IEC 286-3, quantity per reel; 3000. 2010 and 2512 DSC series resistors are supplied on 12mm carrier tape and 7 inch reels as per IEC 286-3, quantity per reel; 2010 : 3000pcs; 2512 : 1800pcs. Reels of 1000pcs are available on request. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. (c) Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0) plc 1670 822181 * Facsimile: +44 (0) 1670 829465 * Email: info@welwyn-tt.com * Website: www.welwyn-tt.com (c) TT Electronics www.ttelectronicsresistors.com 07. 08 07.14 Double Sided Double Sided Chip ChipResistors Resistors Make Possible Welwyn Components DSC DSCSeries Series Application Notes DSC resistors are ideally suited for handling by automatic methods due to their rectangular shape and the small dimensional tolerances. Electrical connection to a ceramic substrate or to a printed circuit board can be made by reflow or wave soldering of wrap-around terminations. Wrap-around terminations provide good leach properties and ensure reliable contact. Due to the robust construction, the DSC can be immersed in the solder bath for 30 seconds at 260C. This enables the resistor to be mounted on one side of a printed circuit board and wire-leaded components applied on the other side. DSC is compatible with typical Pb-free soldering materials and temperature profiles DSC resistors themselves can operate at a maximum temperature of 155C. For soldered resistors, the joint temperature should not exceed 110C. This condition is met when the stated power levels at 70C and recommended pad and trace areas are used. Allowance should be made if smaller areas of copper are used. Ordering Procedure Specify type reference etc as shown in this example of DSC2512 10K ohms 1%. DSC Type 2512 - 10K F T18 Size Termination Standard terminations AS Anti-sulphur terminations Packing Value (use IEC62 code) T3 Tolerance (use IEC62 code) T18 D 0.5% F 1% J 5% T1 Tape 0805, 1206 or 2010 3000/reel 2512 1800/reel Standard 0805, 1206, 2010 or 2512 1000/reel General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. (c) Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0) plc 1670 822181 * Facsimile: +44 (0) 1670 829465 * Email: info@welwyn-tt.com * Website: www.welwyn-tt.com (c) TT Electronics www.ttelectronicsresistors.com 07. 08 07.14