D44H Series (NPN), D45HSeries (PNP) Complementary Silicon Power Transistors These series of plastic, silicon NPN and PNP power transistors can be used as general purpose power amplification and switching such as output or driver stages in applications such as switching regulators, converters and power amplifiers. Features * * * * Low Collector-Emitter Saturation Voltage Fast Switching Speeds Complementary Pairs Simplifies Designs These Devices are Pb-Free and are RoHS Compliant* www.onsemi.com 10 AMP COMPLEMENTARY SILICON POWER TRANSISTORS 60, 80 VOLTS COLLECTOR 2, 4 MAXIMUM RATINGS Rating Collector-Emitter Voltage D44H8, D45H8 D44H11, D45H11 Emitter Base Voltage Symbol Value VCEO Vdc Vdc IC 10 Adc Collector Current - Peak (Note 1) ICM 20 Adc Total Power Dissipation @ TC = 25C @ TA = 25C PD C -55 to +150 Symbol Max Unit Thermal Resistance, Junction-to-Case RqJC 1.8 C/W Thermal Resistance, Junction-to-Ambient RqJA 62.5 C/W Maximum Lead Temperature for Soldering Purposes: 1/8 from Case for 5 Seconds TL 275 C 1 TO-220 CASE 221A STYLE 1 2 *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. 1 D4xHyyG AYWW 3 D4xHyy = Device Code x = 4 or 5 yy = 8 or 11 A = Assembly Location Y = Year WW = Work Week G = Pb-Free Package ORDERING INFORMATION Device November, 2014 - Rev. 13 MARKING DIAGRAM 4 THERMAL CHARACTERISTICS (c) Semiconductor Components Industries, LLC, 2014 EMITTER 3 W Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Pulse Width 6.0 ms, Duty Cycle 50%. Characteristic 1 BASE 70 2.0 TJ, Tstg COLLECTOR 2, 4 EMITTER 3 60 80 5.0 Operating and Storage Junction Temperature Range 1 BASE Unit VEB Collector Current - Continuous NPN PNP Package Shipping D44H8G TO-220 (Pb-Free) 50 Units/Rail D44H11G TO-220 (Pb-Free) 50 Units/Rail D45H8G TO-220 (Pb-Free) 50 Units/Rail D45H11G TO-220 (Pb-Free) 50 Units/Rail Publication Order Number: D44H/D D44H Series (NPN), D45H Series (PNP) ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted) Characteristic Symbol Min Typ Max Unit VCEO(sus) 60 80 - - - - Vdc Collector Cutoff Current (VCE = Rated VCEO, VBE = 0) ICES - - 10 mA Emitter Cutoff Current (VEB = 5.0 Vdc) IEBO - - 10 mA 60 40 - - - - - - 1.0 - - 1.5 - - 90 160 - - - - 50 40 - - - - 300 135 - - - - 500 500 - - - - 140 100 - - OFF CHARACTERISTICS Collector-Emitter Sustaining Voltage (IC = 30 mAdc, IB = 0 Adc) D44H8, D45H8 D44H11, D45H11 ON CHARACTERISTICS DC Current Gain (VCE = 1.0 Vdc, IC = 2.0 Adc) (VCE = 1.0 Vdc, IC = 4.0 Adc) hFE Collector-Emitter Saturation Voltage (IC = 8.0 Adc, IB = 0.4 Adc) VCE(sat) Base-Emitter Saturation Voltage (IC = 8.0 Adc, IB = 0.8 Adc) VBE(sat) - Vdc Vdc DYNAMIC CHARACTERISTICS Collector Capacitance (VCB = 10 Vdc, ftest = 1.0 MHz) Gain Bandwidth Product (IC = 0.5 Adc, VCE = 10 Vdc, f = 20 MHz) Ccb D44H Series D45H Series pF fT D44H Series D45H Series MHz SWITCHING TIMES Delay and Rise Times (IC = 5.0 Adc, IB1 = 0.5 Adc) Storage Time (IC = 5.0 Adc, IB1 = IB2 = 0.5 Adc) Fall Time (IC = 5.0 Adc, IB1 = 102 = 0.5 Adc) td + tr D44H Series D45H Series ns ts D44H Series D45H Series ns tf D44H Series D45H Series ns Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. www.onsemi.com 2 D44H Series (NPN), D45H Series (PNP) 1000 1000 VCE = 1 V 25C hFE, DC CURRENT GAIN hFE, DC CURRENT GAIN VCE = 1 V 125C -40C 100 125C 25C 100 -40C 10 10 0.01 0.1 1 0.01 10 10 IC, COLLECTOR CURRENT (AMPS) Figure 1. D44H11 DC Current Gain Figure 2. D45H11 DC Current Gain 1000 VCE = 5 V VCE = 5 V hFE, DC CURRENT GAIN hFE, DC CURRENT GAIN 1 IC, COLLECTOR CURRENT (AMPS) 1000 25C 125C -40C 100 10 125C 25C 100 -40C 10 0.01 0.1 1 0.01 10 0.1 1 10 IC, COLLECTOR CURRENT (AMPS) IC, COLLECTOR CURRENT (AMPS) Figure 3. D44H11 DC Current Gain Figure 4. D45H11 DC Current Gain 0.6 0.40 VCE(sat) @ IC/IB = 10 SATURATION VOLTAGE (VOLTS) SATURATION VOLTAGE (VOLTS) 0.1 0.35 0.30 -40C 0.25 0.20 25C 0.15 125C 0.10 0.05 VCE(sat) @ IC/IB = 10 0.5 0.4 -40C 0.3 25C 125C 0.2 0.1 0 0 0.1 1 0.1 10 1 IC, COLLECTOR CURRENT (AMPS) IC, COLLECTOR CURRENT (AMPS) Figure 5. D44H11 ON-Voltage Figure 6. D45H11 ON-Voltage www.onsemi.com 3 10 D44H Series (NPN), D45H Series (PNP) 1.4 VBE(sat) @ IC/IB = 10 SATURATION VOLTAGE (VOLTS) SATURATION VOLTAGE (VOLTS) 1.2 -40C 1.0 0.8 125C 0.6 25C 0.4 0.2 0 -40C 1.0 0.8 125C 0.6 25C 0.4 0.2 0 0.1 1 10 0.1 Figure 7. D44H11 ON-Voltage Figure 8. D45H11 ON-Voltage PD, POWER DISSIPATION (WATTS) 1.0 ms 100 ms 10 10 ms TC 70 C dc DUTY CYCLE 50% 1.0 1.0 ms 0.5 0.3 0.2 D44H/45H8 D44H/45H10,11 TA TC 3.0 60 2.0 40 TC 2.0 3.0 5.0 7.0 10 20 30 50 70 100 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) TA 1.0 20 0 0.1 1.0 0 0 20 r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) Figure 9. Maximum Rated Forward Bias Safe Operating Area 1.0 0.7 0.5 60 100 120 80 T, TEMPERATURE (C) 140 160 Figure 10. Power Derating 0.2 0.2 0.1 0.1 P(pk) ZqJC(t) = r(t) RqJC RqJC = 1.56C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) - TC = P(pk) ZqJC(t) 0.05 0.02 0.03 0.02 40 D = 0.5 0.3 0.07 0.05 10 IC, COLLECTOR CURRENT (AMPS) 50 30 20 5.0 3.0 2.0 1 IC, COLLECTOR CURRENT (AMPS) 100 IC, COLLECTOR CURRENT (AMPS) VBE(sat) @ IC/IB = 10 1.2 0.01 SINGLE PULSE t1 t2 DUTY CYCLE, D = t1/t2 0.01 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 t, TIME (ms) Figure 11. Thermal Response www.onsemi.com 4 20 50 100 200 500 1.0 k D44H Series (NPN), D45H Series (PNP) PACKAGE DIMENSIONS TO-220 CASE 221A-09 ISSUE AH -T- B SEATING PLANE C F T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q 1 2 3 U H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D INCHES MIN MAX 0.570 0.620 0.380 0.415 0.160 0.190 0.025 0.038 0.142 0.161 0.095 0.105 0.110 0.161 0.014 0.024 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.53 4.07 4.83 0.64 0.96 3.61 4.09 2.42 2.66 2.80 4.10 0.36 0.61 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 N STYLE 1: PIN 1. 2. 3. 4. BASE COLLECTOR EMITTER COLLECTOR ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative D44H/D