Surface Mount Zener Diode Features: * * * Planar Die Construction General Purpose, Medium Current Ideally Suited for Automated Assembly Processes Applications: * * Zener diode Ultra-small surface mount package Maximum Rating @ Ta = 25C unless otherwise specified Characteristic Symbol Value Unit VF 0.9 V Power dissipation PD 200 mW Thermal resistance, junction to ambient air RjA 625 C/W Tj 150 C Tstg -65 to +150 C Forward voltage @ IF = 10mA Junction temperature Storage temperature range Note : V alid provided that device terminals are kept at ambient temperature. Tested with pulses, t 1ms. Electrical Characteristics @ Ta = 25C unless otherwise specified Type Number MMSZ5245B Marking Code H5 Zener Voltage Range Test Current Vz@IZT IZT Nom(V) Min(V) Max(V) mA 15 14.25 15.75 8.5 Maximum Zener Impedance ZZT@IZT ZZK@IZK = 0.25mA 16 600 Maximum Reverse Leakage Current IR @VR A V 0.1 11 www.element14.com www.farnell.com www.newark.com Page <1> 25/02/13 V1.0 Surface Mount Zener Diode Typical Characteristics @ Ta = 25C unless otherwise specified Package Outline Plastic surface mounted package SOD-323 K B C A D J E Dim Min Max A 1.275 1.325 B 1.675 1.725 C D 0.25 0.35 E 0.27 0.37 H 0.02 0.1 J H 0.9 Typical K 0.1 Typical 2.6 2.7 All Dimensions in mm www.element14.com www.farnell.com www.newark.com Page <2> 25/02/13 V1.0 Surface Mount Zener Diode Soldering Footprint Package Information Device Package Shipping MMSZ5245BS-7-F SOD-323 3,000/Tape & Reel Dimensions : Millimetres Part Number Table Description Part Number Surface Mount Zener Diode MMSZ5245BS-7-F Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <3> 25/02/13 V1.0