2.5SB HEADER 2.5mm Headers (.098") pitch The SB headers can be used to connect any 2.5mm (.098") receptacles to printed circuit boards. They can also be used to directly connect PC boards. They come in pitches of 2.5mm (.098") and in both top entry and side entry type models. 2.54mm (.100") pitch SB headers are also available. In addition, 2.0mm (.079") pitch BC headers are available. Specifications ------------------- * Current rating: 3A AC, DC * Voltage rating: 250V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Post: Brass, copper-undercoated tin/lead-plated * Wafer: Nylon 66, UL94V-0, natural (white) * Pitch: 2.5mm(.098") * Number of circutis: 2 to 20 Standards ---------------------- 0 1 Recognized E60389 Certified LR20812 447 2.5SB HEADER Header ------------------------------------------------------------------ Top entry type Model No. 5.0 (.197) SB( )P-HVQ-B SB( )P-HVQ-C B C 24.8(.976) 4.0 (.157) 8.7 (.343) 16.0(.630) 0.4 (.016) 10.5 (.413) 14.2(.559) SB( )P-HVQ-CA 3.4 (.134) 7.5 (.295) 14.2(.559) SB( )P-HVQ-S 3.4 (.134) 6.0 (.236) 12.7(.500) SB( )P-HVQ-N 6.35(.250) 6.35(.250) 16.0(.630) SB( )P-HVQ-15 6.3 (.248) 13.7 (.539) 23.3(.917) SB( )P-HVQ-16 3.3 (.130) 7.5 (.295) 14.1(.555) SB( )P-HVQ-22 3.4 (.134) 11.1 (.437) 17.8(.701) SB( )P-HVQ-23 3.5 (.138) 5.7 (.224) 12.5(.492) SB( )P-HVQ-24 3.4 (.134) 13.7 (.539) 20.4(.803) SB( )P-HVQ-27 4.0 (.157) 3.5 (.138) 10.8(.425) SB( )P-HVQ-28 1.5 (.059) 5.1 (.201) 9.9(.390) SB( )P-HVQ-29 2.5 (.098) 14.0 (.551) 19.8(.780) SB( )P-HVQ-30 3.4 (.134) 14.8 (.583) 21.5(.846) SB( )P-HVQ-34 3.3 (.130) 3.3 (.130) 9.9(.390) B 16.5 (.650) 3.3 (.130) C 2.5(.098) X (number of circuits -1) SB( )P-HVQ-A A 2.5(.098) Dimensions mm(in.) A 0.64(.025) 2.4(.094) [1.25(.049)] 2.5(.098) X (number of circuits) *The number of circuits (2 to 20) will be filled in the parentheses above. Side entry type Model No. B Dimensions mm(in.) A B C MB( )P-90 3.5(.138) 3.5(.138) 8.8(.346) MB( )P-90H 3.4(.134) 7.6(.299) 9.7(.382) MB( )P-90S 4.3(.169) 7.9(.311) 8.3(.327) MB( )P-90-2 2.3(.091) 2.5(.980) 7.6(.299) A 3.3 (.130) C *The number of circuits (2 to 20) will be filled in the parentheses above. 2.5(.098) 2.5(.098) X (number of circuits -1) 0.64(.025) 2.4(.094) 1.25(.049) 2.5(.098) X (number of circuits) PC board layout (viewed from soldering side) -------------------------------------- 2.50.05 (.098.002) 1.25(.049) min. 0.9+0.1 0 (.035+.004 0 )dia. 448 Note: 1. Tolerances are non-cumulative: 0.05mm(.002" ) for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.