MJ4502/D - ON Semiconductor

Motorola Bipolar Power Transistor Device Data

  



. . . for use as an output device in complementary audio amplifiers to 100–Watts

music power per channel.

•High DC Current Gain — hFE = 25–100 @ IC = 7.5 A

•Excellent Safe Operating Area

•Complement to the NPN MJ802

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

MAXIMUM RATINGS

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Rating

ÎÎÎÎÎÎÎ

Symbol

ÎÎÎÎÎÎÎÎ

Value

ÎÎÎÎ

Unit

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector–Emitter Voltage

ÎÎÎÎÎÎÎ

VCER

ÎÎÎÎÎÎÎÎ

100

ÎÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector–Base Voltage

ÎÎÎÎÎÎÎ

VCB

ÎÎÎÎÎÎÎÎ

100

ÎÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector–Emitter Voltage

ÎÎÎÎÎÎÎ

VCEO

ÎÎÎÎÎÎÎÎ

ÎÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Emitter–Base Voltage

ÎÎÎÎÎÎÎ

VEB

ÎÎÎÎÎÎÎÎ

4.0

ÎÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector Current

ÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎ

ÎÎÎÎ

Adc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Base Current

ÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎ

7.5

ÎÎÎÎ

Adc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Total Device Dissipation @ TC = 25

Derate above 25

ÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎ

200

1.14

ÎÎÎÎ

Watts

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Operating and Storage Junction Temperature Range

ÎÎÎÎÎÎÎ

TJ, Tstg

ÎÎÎÎÎÎÎÎ

–65 to +200

ÎÎÎÎ

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

MAXIMUM RATINGS

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Characteristic

ÎÎÎÎÎÎÎ

Symbol

ÎÎÎÎÎÎÎÎ

Max

ÎÎÎÎ

Unit

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Thermal Resistance, Junction to Case

ÎÎÎÎÎÎÎ

θJC

ÎÎÎÎÎÎÎÎ

0.875

ÎÎÎÎ

C/W

200

150

00 20 40 60 80 100 120 140 160 180 200

Figure 1. Power–Temperature Derating Curve

TC, CASE TEMPERATURE (

PD, POWER DISSIPATION (WATTS)

100



SEMICONDUCTOR TECHNICAL DATA Order this document

by MJ4502/D

 Motorola, Inc. 1995



30 AMPERE

POWER TRANSISTOR

PNP SILICON

100 VOLTS

200 WATTS

CASE 1–07

TO–204AA

(TO–3)

REV 7

MJ4502

2 Motorola Bipolar Power Transistor Device Data

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

ELECTRICAL CHARACTERISTICS (TC = 25

C unless otherwise noted)

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Characteristic

ÎÎÎÎ

Symbol

ÎÎÎÎ

Min

ÎÎÎÎ

Max

ÎÎÎ

Unit

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

OFF CHARACTERISTICS

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector–Emitter Breakdown Voltage(1) (IC = 200 mAdc, RBE = 100 Ohms)

ÎÎÎÎ

V(BR)CER

ÎÎÎÎ

100

ÎÎÎÎ

—

ÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector–Emitter Sustaining Voltage(1) (IC = 200 mAdc)

ÎÎÎÎ

VCEO(sus)

ÎÎÎÎ

—

ÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector–Base Cutoff Current

(VCB = 100 Vdc, IE = 0)

(VCB = 100 Vdc, IE = 0, TC = 150

ÎÎÎÎ

ICBO

ÎÎÎÎ

—

ÎÎÎÎ

1.0

5.0

ÎÎÎ

mAdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Emitter–Base Cutoff Current (VBE = 4.0 Vdc, IC = 0)

ÎÎÎÎ

IEBO

ÎÎÎÎ

—

ÎÎÎÎ

1.0

ÎÎÎ

mAdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

ON CHARACTERISTICS

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

DC Current Gain (IC = 7.5 Adc, VCE = 2.0 Vdc)

ÎÎÎÎ

hFE

ÎÎÎÎ

100

ÎÎÎ

—

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Base–Emitter “On” Voltage (IC = 7.5 Adc, VCE = 2.0 Vdc)

ÎÎÎÎ

VBE(on)

ÎÎÎÎ

—

ÎÎÎÎ

1.3

ÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector–Emitter Saturation Voltage (IC = 7.5 Adc, IB = 0.75 Adc)

ÎÎÎÎ

VCE(sat)

ÎÎÎÎ

—

ÎÎÎÎ

0.8

ÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Base–Emitter Saturation Voltage (IC = 7.5 Adc, IB = 0.75 Adc)

ÎÎÎÎ

VBE(sat)

ÎÎÎÎ

—

ÎÎÎÎ

1.3

ÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

DYNAMIC CHARACTERISTICS

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Current Gain — Bandwidth Product (IC = 1.0 Adc, VCE = 10 Vdc, f = 1.0 MHz)

ÎÎÎÎ

2.0

ÎÎÎÎ

—

ÎÎÎ

MHz

(1)Pulse Test: Pulse Width

300 µs, Duty Cycle

2.0%.

3.0

0.03

Figure 2. DC Current Gain

IC, COLLECTOR CURRENT (AMP)

0.1 0.05 0.1 0.2 0.3 3.0 5.0 30

1.0

0.5

0.3

0.2

2.0

IC, COLLECTOR CURRENT (AMP)

1.4

0.8

0.6

0.4

TJ = 25

VBE(sat) @ IC/IB = 10

VCE(sat) @ IC/IB = 10

“ON” VOLTAGE (VOLTS)

Figure 3. “On” Voltages

2.0

0.7

hFE, NORMALIZED CURRENT GAIN

TJ = 175

–55

VCE = 2.0 V

DATA SHOWN IS OBTAINED FROM PULSE TESTS

AND ADJUSTED TO NULLIFY EFFECT OF ICBO.

0.5 1.0 2.0 2010

VBE @ VCE = 2.0 V

0.2

1.0

1.2

1.8

1.6

0.03 0.05 0.1 0.2 0.3 3.0 5.0 300.5 1.0 2.0 2010

Figure 4. Active Region Safe Operating Area

100

0.1

5.0

2.0

1.0

0.5

0.2

1.0 2.0 3.0 5.0 10 20 30 50 100

VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS)

SECONDARY BREAKDOWN LIMITED

BONDING WIRE LIMITED

THERMAL LIMITATIONS @ TC = 25

PULSE DUTY CYCLE

10%

IC, COLLECTOR CURRENT (AMP)

TJ = 200

5.0 ms

1.0 ms

100

The Safe Operating Area Curves indicate IC – VCE limits

below which the device will not enter secondary breakdown.

Collector load lines for specific circuits must fall within the ap-

plicable Safe Area to avoid causing a catastrophic failure. To

insure operation below the maximum TJ, power–temperature

derating must be observed for both steady state and pulse

power conditions.

MJ4502

Motorola Bipolar Power Transistor Device Data

PACKAGE DIMENSIONS

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH.

3. ALL RULES AND NOTES ASSOCIATED WITH

REFERENCED TO–204AA OUTLINE SHALL APPLY.

STYLE 1:

PIN 1. BASE

2. EMITTER

CASE: COLLECTOR

DIM MIN MAX MIN MAX

MILLIMETERSINCHES

A1.550 REF 39.37 REF

B––– 1.050 ––– 26.67

C0.250 0.335 6.35 8.51

D0.038 0.043 0.97 1.09

E0.055 0.070 1.40 1.77

G0.430 BSC 10.92 BSC

H0.215 BSC 5.46 BSC

K0.440 0.480 11.18 12.19

L0.665 BSC 16.89 BSC

N––– 0.830 ––– 21.08

Q0.151 0.165 3.84 4.19

U1.187 BSC 30.15 BSC

V0.131 0.188 3.33 4.77

–T–

SEATING

PLANE

2 PLD

0.13 (0.005) Y M

0.13 (0.005) T

–Q–

–Y–

CASE 1–07

TO–204AA (TO–3)

ISSUE Z

MJ4502

4 Motorola Bipolar Power Transistor Device Data

How to reach us:

USA / EUROPE: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki,

P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315

MFAX: RMFAX0@email.sps.mot.com – T OUCHTONE (602) 244–6609 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,

INTERNET: http://Design–NET.com 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty , representation or guarantee regarding

the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,

and specifically disclaims any and all liability , including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different

applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does

not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in

systems intended for surgical implant into the body , or other applications intended to support or sustain life, or for any other application in which the failure of

the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such

unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless

against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.

Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer .

MJ4502/D

*MJ4502/D*

◊