Copyright 2002 Semicoa Semiconductors, Inc.
Rev. H 333 McCormick Avenue, Costa Mesa, California 92626 714.979.1900, FAX 714.557.4541 Page 1 of 1
www.SEMICOA.com
2N2905AL
Silicon PNP Transisto
r
Data Sheet
Description
Semicoa Semiconductors offers:
• Screening and processing per MIL-PRF-19500 Appendix E
• JAN level (2N2905ALJ)
• JANTX level (2N2905ALJX)
• JANTXV level (2N2905ALJV)
• JANS level (2N2905ALJS)
• QCI to the applicable level
• 100% die visual inspection per MIL-STD-750 method
2072 for JANTXV and JANS
• Radiation testing (total dose) upon request
Please contact Semicoa for special configurations
www.SEMICOA.com or (714) 979-1900
Applications
• General purpose
• Low power
• PNP silicon transistor
Features
• Hermetically sealed TO-5 metal can
• Also available in chip configuration
• Chip geometry 0600
• Reference document:
MIL-PRF-19500/290
Benefits
• Qualification Levels: JAN, JANTX,
JANTXV and JANS
• Radiation testing available
Absolute Maximum Ratings TC = 25°C unless otherwise specified
Parameter Symbol Rating Unit
Collector-Emitter Voltage VCEO 60 Volts
Collector-Base Voltage VCBO 60 Volts
Emitter-Base Voltage VEBO 5 Volts
Collector Current, Continuous IC 600 mA
Power Dissipation, TA = 25 °C
Derate linearly above 60 °C PT 0.8
5.7
W
mW/°C
Power Dissipation, TC = 25 °C
Derate linearly above 25 °C PT 3.0
17.2
W
mW/°C
Thermal Resistance RθJA 58 °C/W
Operating Junction Temperature
Storage Temperature
TJ
TSTG -65 to +200 °C
Copyright 2002 Semicoa Semiconductors, Inc.
Rev. H 333 McCormick Avenue, Costa Mesa, California 92626 714.979.1900, FAX 714.557.4541 Page 2 of 2
www.SEMICOA.com
2N2905AL
Silicon PNP Transisto
r
Data Sheet
ELECTRICAL CHARACTERISTICS
characteristics specified at TA = 25°C
Off Characteristics
Parameter Symbol Test Conditions Min Typ Max Units
Collector-Emitter Breakdown Voltage V(BR)CEO I
C = 10 mA 60 Volts
Collector-Base Cutoff Current ICBO1 V
CB = 60 Volts 10 µA
Collector-Base Cutoff Current ICBO2 V
CB = 50 Volts 10 nA
Collector-Base Cutoff Current ICBO3 V
CB = 50 Volts, TA = 150OC 10
µA
Collector-Emitter Cutoff Current ICES V
CE = 60 Volts 1 µA
Emitter-Base Cutoff Current IEBO1 V
EB = 5 Volts 10 µA
Emitter-Base Cutoff Current IEBO2 V
EB = 3.5 Volts 50 nA
On Characteristics Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2.0%
Parameter Symbol Test Conditions Min Typ Max Units
DC Current Gain
hFE1
hFE2
hFE3
hFE4
hFE5
hFE6
IC = 0.1 mA, VCE = 10 Volts
IC = 1.0 mA, VCE = 10 Volts
IC = 10 mA, VCE = 10 Volts
IC = 150 mA, VCE = 10 Volts
IC = 500 mA, VCE = 10 Volts
IC = 1.0 mA, VCE = 10 Volts
TA = -55OC
75
100
100
100
50
50
450
300
Base-Emitter Saturation Voltage VBEsat1
VBEsat2
IC = 150 mA, IB = 15 mA
IC = 500 mA, IB = 50 mA
1.3
2.6 Volts
Collector-Emitter Saturation Voltage VCEsat1
VCEsat2
IC = 150 mA, IB = 15 mA
IC = 500 mA, IB = 50 mA
0.4
1.6 Volts
Dynamic Characteristics
Parameter Symbol Test Conditions Min Typ Max Units
Magnitude – Common Emitter, Short
Circuit Forward Current Transfer Ratio |hFE| VCE = 20 Volts, IC = 50 mA,
f = 100 MHz 2.0
Small Signal Short Circuit Forward
Current Transfer Ratio hFE VCE = 10 Volts, IC = 1 mA,
f = 1 kHz 100
Open Circuit Output Capacitance COBO VCB = 10 Volts, IC = 0 mA,
100 kHZ < f < 1 MHz 8
pF
Open Circuit Input Capacitance CIBO VEB = 2.0 Volts, IE = 0 mA,
100 kHZ < f < 1 MHz 30
pF
Switching Characteristics
Saturated Turn-On Time ton 45
ns
Saturated Turn-Off Time toff
300 ns