Series 107-70 Nylon Extractor SERIES 107-70 LATCHING NYLON INSERTER / EXTRACTOR MATERIALS 22.35(.880) Units: mm (in) Extractor Molded in Glass Filled (30%) 6/6 or Type 6 Nylon. Main handle is UL94-V0, but latch is UL94-V2. .xx .25, .x .5 (.xxx .010, .xx .02) 47.5 (1.87) 3.96 (.156) R Assembly Pin Stainless steel, passivated COLOR 12.06 (.475) Series 107-70 standard color is black. Other colors available, please contact an Application Engineer with your requirements. 11.05 (.435 ) *8.89 (.350) for 3.2 (.125) thick boards 7.37* (.290) HOT STAMPING Hot stamp marking service is available. Please contact an Application Engineer with your requirements. 2.38 (.094) Dia. 2.28 .13 (.090 005) APPLICATION DATA Two inserter or inserter-extractors are recommended per printed circuit board taller than 127 (5) in height. 7.24 .38 (.285 .015) 6.35 (.250) 1.5 (.06) 6.1 (.24) min. 0 6.35 (.250) 2.77 (.109) Dia. ASSEMBLY PIN [blank] Assembly Pin [blank] 3 4 7 Series 107- 0 extractor PCB thickness of 2.4 (.094) 18.5 (.73) 9.1 (.36) Card Guide Surface 1.5 (.06) max. 70 22.86.13 (.900 .005) for Option to be pre-started for: * Faster and easier installation of the extractor to the PCB * Eliminates the need for special tools or equipment and set up time. * Eliminates loss of loose assembly pins If the "P" option is not selected, the extractors and the pins will be packaged seperately. nVent.com/SCHROFF1-800-854-7086 nVent may modify standard parts without prior notice to or approval from customers. These modifications may change product appearance, but will not have a detrimental effect on form, fit or function. (c)2018 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.