2N5401HR Hi-Rel PNP bipolar transistor 150 V, 0.5 A Datasheet -- production data Features 3 BVCEO 150 V IC (max) 0.5 A 1 1 2 2 3 HFE at 10 V - 150 mA > 60 Operating temperature range -65C to +200C TO-18 LCC-3 3 Hi-Rel PNP bipolar transistor Linear gain characteristics 4 1 2 ESCC qualified European preferred part list - EPPL 100 krad low dose rate Radiation level: lot specific total dose contact marketing for specified level LCC-3UB Figure 1. Internal schematic diagram Description The 2N5401HR is a silicon planar epitaxial PNP transistor available in TO-18 and LCC-3 packages. It is specifically designed for aerospace Hi-Rel applications and ESCC qualified according to the 5202-014 specification. In case of conflict between this datasheet and ESCC detailed specification, the latter prevails. Table 1. Device summary Order codes ESCC part num. 2N5401UB1 - Eng. Model 2N5401SW 5202/014/05 ESCC Flight 2N5401UB06 5202/014/06 2N5401UB07 SOC5401 2N5401HR Lead finish Mass (g) EPPL LCC-3UB Gold 0.06 - LCC-3 Solder Dip 0.06 Y ESCC Flight LCC-3UB Gold 0.06 - 5202/014/07 ESCC Flight LCC-3UB Solder Dip 0.06 - - Eng. Model LCC-3 Gold 0.06 - ESCC Flight LCC-3 Gold/Solder Dip(1) 0.06 Y Eng. Model TO-18 Gold 0.40 - 0.40 - SOC5401HRB 5202/014/04 or 05 2N5401/T1 Quality level Rad level Packages 5202/014/01 or 02 100 krad ESCC Flight TO-18 Gold/Solder Dip (1) 1. Depending ESCC part number mentioned on the purchase order. October 2012 This is information on a product in full production. Doc ID 16934 Rev 3 1/10 www.st.com 10 Electrical ratings 1 2N5401HR Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VCBO Collector-base voltage (IE = 0) -160 V VCEO Collector-emitter voltage (IB = 0) -150 V VEBO Emitter-base voltage (IC = 0) -5 V -0.6 -0.5 A A 0.36 0.36 0.58 W W W 1.2 W -65 to 200 C 200 C IC PTOT TSTG TJ Collector current for 2N5401HR for SOC5401HRB Total dissipation at Tamb 25 C for 2N5401HR for SOC5401HRB for SOC5401HRB (1) Total dissipation at Tc 25 C for 2N5401HR Storage temperature Max. operating junction temperature 1. When mounted on a 8x10x0.6 mm ceramic substrate. Table 3. Symbol RthJC RthJA Table 4. Symbol RthJA Thermal data for through-hole package Parameter Thermal resistance junction-case __ Thermal resistance junction-ambient __ Unit 146 486 C/W C/W Value Unit 486 302 C/W C/W Thermal data for SMD package Parameter Thermal resistance junction-ambient __ Thermal resistance junction-ambient (1) __ 1. When mounted on a 8x10x0.6 mm ceramic substrate. 2/10 max max Value Doc ID 16934 Rev 3 max max 2N5401HR 2 Electrical characteristics Electrical characteristics Tcase = 25 C unless otherwise specified. Table 5. Electrical characteristics Symbol Parameter ICBO Collector-base cut-off current (IE = 0) VCB = -120 V VCB = -120 V IEBO Emitter-base cut-off current (IC = 0) VEB = -3 V V(BR)CBO Collector-base breakdown voltage (IE = 0) IC = -100 A -160 V Collector-emitter V(BR)CEO (1) breakdown voltage (IB = 0) IC = -1 mA -150 V V(BR)EBO Emitter-base breakdown voltage (IC = 0) IE = -10 A -5 V VCE(sat) (1) Collector-emitter saturation voltage IC = -10 mA IC = -50 mA IB = -1 mA IB = -5 mA -0.2 -0.5 V V VBE(sat) (1) Base-emitter saturation voltage IC = -10 mA IC = -50 mA IB = -1 mA IB = -5 mA -1 -1 V V DC current gain IC = -1 mA IC = -10 mA IC = -50 mA IC = -10 mA Tamb = -55 C VCE = -5 V VCE = -5 V VCE = -5 V VCE = -5 V hfe Small signal current gain VCE = -10 V f = 10 kHz IC = -10 mA Cobo Output capacitance (IE = 0) VCB = -10 V f = 1 MHz hFE (1) Test conditions Min. TC = 150 C 50 60 60 20 Typ. Max. Unit -50 -50 nA A -50 nA 240 5 6 pF 1. Pulsed duration = 300 s, duty cycle 2 % Doc ID 16934 Rev 3 3/10 Package mechanical data 3 2N5401HR Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. 4/10 Doc ID 16934 Rev 3 2N5401HR Package mechanical data Table 6. LCC-3 mechanical data mm. Dim. Min. Typ. A 1.16 1.42 C 0.45 0.50 0.56 D 0.60 0.76 0.91 E 0.91 1.01 1.12 F 1.95 2.03 2.11 G 2.92 3.05 3.17 I 2.41 2.54 2.66 J 0.42 0.57 0.72 K 1.37 1.52 1.67 L 0.40 0.50 0.60 M 2.46 2.54 2.62 N 1.80 1.90 2.00 R Figure 2. Max. 0.30 LCC-3 drawings 1 2 3 Doc ID 16934 Rev 3 5/10 Package mechanical data Table 7. 2N5401HR LCC-3UB mechanical data mm. Dim. Min. Figure 3. 6/10 Typ. Max. A 1.16 1.42 C 0.46 0.51 0.56 D 0.56 0.76 0.96 E 0.92 1.02 1.12 F 1.95 2.03 2.11 G 2.92 3.05 3.18 I 2.41 2.54 2.67 J 0.42 0.57 0.72 K 1.37 1.52 1.67 L 0.41 0.51 0.61 M 2.46 2.54 2.62 N 1.81 1.91 2.01 r 0.20 r1 0.30 r2 0.56 LCC-3UB drawings Doc ID 16934 Rev 3 2N5401HR Package mechanical data Table 8. TO-18 mechanical data mm. Dim. Min. A Max. 12.7 B 0.49 D 5.3 E 4.9 F 5.8 G 2.54 H 1.2 I 1.16 L Figure 4. Typ. 45 TO-18 drawings Doc ID 16934 Rev 3 7/10 Order codes 2N5401HR 4 Order codes Table 9. Order codes Order codes ESCC part number 2N5401UB1 - 2N5401SW 5202/014/05 2N5401UB06 Radiation Packages level Lead finish Marking EPPL Packing LCC-3UB Gold 2N5401UB1 - Waffle pack LCC-3 Solder Dip 520201407 Y Waffle pack 5202/014/06 LCC-3UB Gold 520201406 - Waffle pack 2N5401UB07 5202/014/07 LCC-3UB Solder Dip 520201407 - Waffle pack SOC5401 - LCC-3 Gold SOC5401 - Waffle pack SOC5401HRB 5202/014/04 or 05 LCC-3 Y Waffle pack 2N5401/T1 - TO-18 - Strip pack 2N5401HR 5202/014/01 or 02 TO-18 - Strip pack 1. 100 krad Gold/Solder Dip(1) 520201404 or 05 Gold 2N5401/T1 Gold/Solder Dip(1) 520201401 or 02 Depending ESCC part number mentioned on the purchase order. Contact ST sales office for information about the specific conditions for: 8/10 - Products in die form - Tape and reel packing Doc ID 16934 Rev 3 2N5401HR 5 Revision history Revision history Table 10. Document revision history Date Revision Changes 04-Jan-2010 1 Initial release 13-Jul-2010 2 Modified Table 1 on page 1, added Table 9 on page 8 10-Oct-2012 3 Table 1 on page 1 and Section 4: Order codes have been updated. Section 3: Package mechanical data has been updated. Doc ID 16934 Rev 3 9/10 2N5401HR Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10 Doc ID 16934 Rev 3