1. Product profile
1.1 General description
PNP Resistor-Equipped Transistor (RET) family in Surface-Mounted Device (SMD) plastic
packages.
1.2 Features and benefits
1.3 Applications
1.4 Quick reference data
PDTA144E series
PNP resistor-equipped transistors;
R1 = 47 k, R2 = 47 k
Rev. 8 — 14 November 2011 Product data sheet
Table 1. Product overview
Type number Package NPN
complement Package
configuration
Nexperia JEITA JEDEC
PDTA144EE SOT416 SC-75 - PDTC144EE ultra small
PDTA144EM SOT883 SC-101 - PDTC144EM leadless ultra small
PDTA144ET SOT23 - TO-236AB PDTC144ET small
PDTA144EU SOT323 SC-70 - PDTC144EU very small
100 mA output current capability Reduces component count
Built-in bias resistors Reduces pick and place costs
Simplifies circuit design AEC-Q101 qualified
Digital applications in automotive and
industrial segments
Cost-saving alternative for BC847/857
series in digital applications
Control of IC inputs Switching loads
Table 2. Quick reference data
Symbol Parameter Conditions Min Typ Max Unit
VCEO collector-emitter voltage open base - - 50 V
IOoutput current - - 100 mA
R1 bias resistor 1 (input) 33 47 61 k
R2/R1 bias resistor ratio 0.8 1 1.2
© Nexperia B.V. 2017. All rights reserved
PDTA144E_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 8 — 14 November 2011 2 of 17
Nexperia PDTA144E series
PNP resistor-equipped transistors; R1 = 47 k, R2 = 47 k
2. Pinning information
3. Ordering information
4. Marking
[1] * = placeholder for manufacturing site code
Table 3. Pinning
Pin Description Simplified outline Graphic symbol
SOT23; SOT323; SOT416
1 input (base)
2 GND (emitter)
3 output (collector)
SOT883
1 input (base)
2 GND (emitter)
3 output (collector)
006aaa144
12
3
sym003
3
2
1R1
R2
3
1
2
Transparent
top view
sym003
3
2
1R1
R2
Table 4. Orderin g information
Type number Package
Name Description Version
PDTA144EE SC-75 plastic surface-mounted package; 3 leads SOT416
PDT A144EM SC-101 leadless ultra small plastic package; 3 solder lands;
body 1.0 0.6 0.5 mm SOT883
PDTA144ET - plastic surface-mounted package; 3 leads SOT23
PDTA144EU SC-70 plastic surface-mounted package; 3 leads SOT323
Table 5. Marking codes
Type number Marking code[1]
PDTA144EE 07
PDTA144EM DR
PDTA144ET *07
PDTA144EU *07
© Nexperia B.V. 2017. All rights reserved
PDTA144E_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 8 — 14 November 2011 3 of 17
Nexperia PDTA144E series
PNP resistor-equipped transistors; R1 = 47 k, R2 = 47 k
5. Limiting values
[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
[2] Reflow soldering is the only recommended soldering method.
[3] Device mounted on an FR4 PCB with 70 m copper strip line, standard footprint.
Table 6. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
VCBO collector-base voltage open emitter - 50 V
VCEO collector-emitter voltage open base - 50 V
VEBO emitter-base voltage open collector - 10 V
VIinput voltage
positive - +10 V
negative - 40 V
IOoutput current - 100 mA
ICM peak collector current single pulse;
tp1ms -100 mA
Ptot total power dissipation Tamb 25 C
PDTA144EE (SOT416) [1][2] -150mW
PDTA144EM (SOT883) [2][3] -250mW
PDTA144ET (SOT23) [1] -250mW
PDTA144EU (SOT323) [1] -200mW
Tjjunction temperature - 150 C
Tamb ambient temperature 65 +150 C
Tstg storage temperature 65 +150 C
© Nexperia B.V. 2017. All rights reserved
PDTA144E_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 8 — 14 November 2011 4 of 17
Nexperia PDTA144E series
PNP resistor-equipped transistors; R1 = 47 k, R2 = 47 k
6. Thermal characteristics
[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[2] Reflow soldering is the only recommended soldering method.
[3] Device mounted on an FR4 PCB with 70 m copper strip line, standard footprint.
(1) SOT23; FR4 PCB, standard footprint
SOT883; FR4 PCB with 70 m copper strip line, standard footprint
(2) SOT323; FR4 PCB, standard footprint
(3) SOT416; FR4 PCB, standard footprint
Fig 1. Power derating curves
Tamb (°C)
-75 17512525 75-25
006aac778
100
200
300
Ptot
(mW)
0
(1)
(2)
(3)
Table 7. Thermal characteris tics
Symbol Parameter Conditions Min Typ Max Unit
Rth(j-a) thermal resistance from junction
to ambient in free air
PDTA144EE (SOT416) [1][2] --830K/W
PDTA144EM (SOT883) [2][3] --500K/W
PDTA144ET (SOT23) [1] --500K/W
PDTA144EU (SOT323) [1] --625K/W
© Nexperia B.V. 2017. All rights reserved
PDTA144E_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 8 — 14 November 2011 5 of 17
Nexperia PDTA144E series
PNP resistor-equipped transistors; R1 = 47 k, R2 = 47 k
FR4 PCB, standard footprint
Fig 2. Transient thermal impedance from junction to ambient as a function of pulse duration for
PDTA144EE (SOT416); typical values
FR4 PCB, 70 m copper strip line
Fig 3. Transient thermal impedance from junction to ambient as a function of pulse duration for
PDTA144EM (SOT883); typical values
006aac781
10-5 1010-2
10-4 102
10-1 tp (s)
10-3 103
1
102
10
103
Zth(j-a)
(K/W)
1
duty cycle = 1
0.75 0.5
0.33 0.2
0.1
0.05
0.02 0.01
0
006aac782
10-5 1010-2
10-4 102
10-1 tp (s)
10-3 103
1
102
10
103
Zth(j-a)
(K/W)
1
duty cycle = 1
0.75 0.5
0.33 0.2
0.1 0.05
0.02
0.01
0
© Nexperia B.V. 2017. All rights reserved
PDTA144E_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 8 — 14 November 2011 6 of 17
Nexperia PDTA144E series
PNP resistor-equipped transistors; R1 = 47 k, R2 = 47 k
FR4 PCB, standard footprint
Fig 4. Transient thermal impedance from junction to ambient as a function of pulse duration for
PDTA144ET (SOT23); typical values
FR4 PCB, standard footprint
Fig 5. Transient thermal impedance from junction to ambient as a function of pulse duration for
PDTA144EU (SOT323); typical values
006aac779
10-5 1010-2
10-4 102
10-1 tp (s)
10-3 103
1
102
10
103
Zth(j-a)
(K/W)
1
duty cycle = 1
0.75 0.5
0.33 0.2
0.1
0.05
0.02 0.01
0
006aac780
10-5 1010-2
10-4 102
10-1 tp (s)
10-3 103
1
102
10
103
Zth(j-a)
(K/W)
1
duty cycle = 1
0.75 0.5
0.33 0.2
0.1
0.05
0.02 0.01
0
© Nexperia B.V. 2017. All rights reserved
PDTA144E_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 8 — 14 November 2011 7 of 17
Nexperia PDTA144E series
PNP resistor-equipped transistors; R1 = 47 k, R2 = 47 k
7. Characteristics
[1] Characteristics of built-in transistor
Table 8. Characteristics
Tamb =25
C unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
ICBO collector-base cut-off
current VCB =50 V; IE=0A - - 100 nA
ICEO collector-emitter
cut-off current VCE =30 V; I B=0A - - 1A
VCE =30 V; IB=0A;
Tj= 150 C--5A
IEBO emitter-base cut-off
current VEB =5V; I
C=0A - - 90 A
hFE DC current gain VCE =5V; I
C=5mA 80 - -
VCEsat collector-emitter
saturation voltage IC=10 mA; IB=0.5 mA - - 150 mV
VI(off) off-state input voltage VCE =5V; I
C=100 A- 1.2 0.8 V
VI(on) on-state input voltage V CE =0.3 V; IC=2mA 31.6 - V
R1 bias resistor 1 (input) 33 47 61 k
R2/R1 bias resistor ratio 0.8 1 1.2
Cccollector capacitance VCB =10 V; IE=i
e=0A;
f=1MHz --3pF
fTtransition frequency VCE =5V; I
C=10 mA;
f = 100 MHz [1] -180-MHz
© Nexperia B.V. 2017. All rights reserved
PDTA144E_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 8 — 14 November 2011 8 of 17
Nexperia PDTA144E series
PNP resistor-equipped transistors; R1 = 47 k, R2 = 47 k
VCE =5V
(1) Tamb = 100 C
(2) Tamb =25C
(3) Tamb =40 C
IC/IB=20
(1) Tamb = 100 C
(2) Tamb =25C
(3) Tamb =40 C
Fig 6. DC current gain as a function of collector
current; typical values Fig 7. Collec tor-emitter sa turation voltage as a
function of collector current; typical values
VCE =0.3 V
(1) Tamb =40 C
(2) Tamb =25C
(3) Tamb = 100 C
VCE =5V
(1) Tamb =40 C
(2) Tamb =25C
(3) Tamb = 100 C
Fig 8. On-state input voltage as a function of
collector current; typical valu es Fig 9. Off-state input voltage as a function of
collector current; typical values
IC (mA)
-10-1 -102
-10-1
006aac758
102
10
103
hFE
1
(1)
(2)
(3)
006aac759
IC (mA)
-10-1 -102
-10-1
-10-1
-1
VCEsat
(V)
-10-2
(1)
(2)
(3)
006aac760
IC (mA)
-10-1 -102
-10-1
-1
-10
VI(on)
(V)
-10-1
(1)
(2)
(3)
IC (mA)
-10-1 -10-1
006aac761
-1
-10
VI(off)
(V)
-10-1
(1)
(2)
(3)
© Nexperia B.V. 2017. All rights reserved
PDTA144E_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 8 — 14 November 2011 9 of 17
Nexperia PDTA144E series
PNP resistor-equipped transistors; R1 = 47 k, R2 = 47 k
8. Test information
8.1 Quality information
This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is
suitable for use in automotive applications.
f=1MHz; T
amb =25CV
CE =5V; T
amb =25C
Fig 10. Collector capacitance as a function of
collector-base voltage; typical values of
built-in transistor
Fig 11. Transition frequency as a function of colle cto r
current; typical values of built-in transistor
VCB (V)
0 -50-40-20 -30-10
006aac762
3
6
9
Cc
(pF)
0
006aac763
IC (mA)
-10-1 -102
-10-1
102
103
fT
(MHz)
10
© Nexperia B.V. 2017. All rights reserved
PDTA144E_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 8 — 14 November 2011 10 of 17
Nexperia PDTA144E series
PNP resistor-equipped transistors; R1 = 47 k, R2 = 47 k
9. Package outline
10. Packing information
[1] For further information and the availability of packing methods, see Section 14.
Fig 12. Package outline PDTA144EE (SOT41 6/SC-75) Fig 13. Package outline PDTA144EM (SOT883/SC-101)
Fig 14. Package outline PDTA144ET (SOT23) Fig 15. Package outline PDTA144EU (SOT323/SC-70)
04-11-04Dimensions in mm
0.95
0.60
1.8
1.4
1.75
1.45 0.9
0.7
0.25
0.10
1
0.30
0.15
12
30.45
0.15
03-04-03Dimensions in mm
0.62
0.55
0.55
0.47 0.50
0.46
0.65
0.20
0.12
3
21
0.30
0.22
0.30
0.22
1.02
0.95
0.35
04-11-04Dimensions in mm
0.45
0.15
1.9
1.1
0.9
3.0
2.8
2.5
2.1 1.4
1.2
0.48
0.38 0.15
0.09
12
3
04-11-04Dimensions in mm
0.45
0.15
1.1
0.8
2.2
1.8
2.2
2.0 1.35
1.15
1.3
0.4
0.3 0.25
0.10
12
3
Table 9. Packing methods
The indicated -xxx are the last three digits of the 12NC ordering code.[1]
Type number Package Description Packing quantity
3000 5000 10000
PDTA144EE SOT416 4 mm pitch, 8 mm tape and reel -115 - -135
PDTA144EM SOT883 2 mm pitch, 8 mm tape and reel - - -315
PDTA144ET SOT23 4 mm pitch, 8 mm tape and reel -215 - -235
PDTA144EU SOT323 4 mm pitch, 8 mm tape and reel -115 - -135
© Nexperia B.V. 2017. All rights reserved
PDTA144E_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 8 — 14 November 2011 11 of 17
Nexperia PDTA144E series
PNP resistor-equipped transistors; R1 = 47 k, R2 = 47 k
11. Soldering
Reflow soldering is the only recommended soldering method.
Fig 16. Reflow soldering footprint PDTA144EE (SOT416/SC-75)
Reflow soldering is the only recommended soldering method.
Fig 17. Reflow soldering footprint PDTA144EM (SOT883/SC-101)
solder lands
solder resist
occupied area
solder paste
sot416_fr
0.85
1.7
2.2
2
0.5
(3×)
0.6
(3×)
1
1.3
Dimensions in mm
solder lands
solder resist
occupied area
solder paste
sot883_fr
1.3
0.3
0.6 0.7
0.4
0.9
0.3
(2×)
0.4
(2×)
0.25
(2×)
R0.05 (12×)
0.7
Dimensions in mm
© Nexperia B.V. 2017. All rights reserved
PDTA144E_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 8 — 14 November 2011 12 of 17
Nexperia PDTA144E series
PNP resistor-equipped transistors; R1 = 47 k, R2 = 47 k
Fig 18. Reflow soldering footprint PDTA144ET (SOT23)
Fig 19. Wave soldering footprint PDTA144ET (SOT23)
solder lands
solder resist
occupied area
solder paste
sot023_fr
0.5
(3×)
0.6
(3×)
0.6
(3×)
0.7
(3×)
3
1
3.3
2.9
1.7
1.9
2
Dimensions in mm
solder lands
solder resist
occupied area
preferred transport direction during soldering
sot023_fw
2.8
4.5
1.4
4.6
1.4
(2×)
1.2
(2×)
2.2
2.6
Dimensions in mm
© Nexperia B.V. 2017. All rights reserved
PDTA144E_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 8 — 14 November 2011 13 of 17
Nexperia PDTA144E series
PNP resistor-equipped transistors; R1 = 47 k, R2 = 47 k
Fig 20. Reflow soldering footprint PDTA144EU (SOT323/SC-70)
Fig 21. Wave soldering footprint PDTA144EU (SOT323/SC-70)
solder lands
solder resist
occupied area
solder paste
sot323_fr
2.65
2.35 0.6
(3×)
0.5
(3×)
0.55
(3×)
1.325
1.85
1.3
3
2
1
Dimensions in mm
sot323_fw
3.65 2.1
1.425
(3×)
4.6
09
(2×)
2.575
1.8
solder lands
solder resist
occupied area
preferred transport
direction during soldering
Dimensions in mm
© Nexperia B.V. 2017. All rights reserved
PDTA144E_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 8 — 14 November 2011 14 of 17
Nexperia PDTA144E series
PNP resistor-equipped transistors; R1 = 47 k, R2 = 47 k
12. Revision history
Table 10. Revision history
Document ID Release date Data sheet status Change notice Supersedes
PDTA144E_SERIES v.8 20111114 Product data sheet - PDTA144E_SERIES v.7
Modifications: •The format of this document has been redesigned to comply with the new identity
guidelines of NXP Semiconductors.
•Legal texts have been adapted to the new company name where appropriate.
•Type numbers PDTA144EEF, PDTA144EK and PDTA144ES removed.
•Section 1 “Product profile”: updated
•Section 3 “Ordering information”: added
•Section 4 “Marking”: updated
•Figure 1 to 11: added
•Section 6 “Thermal characteristics”: updated
•Table 8 “Characteristics”: Vi(on) redefined to VI(on) on-state input voltage, Vi(off) redefined
to VI(off) off-state input voltage, ICEO updated, fT added
•Section 8 “Test information”: added
•Section 9 “Package outline”: superseded by minimized package outline drawings
•Section 10 “Packing information”: added
•Section 11 “Soldering”: added
•Section 13 “Legal information”: updated
PDTA144E_SERIES v.7 20040805 Product data sheet - PDTA144E_SERIES v.6
PDTA144E_SERIES v.6 20030410 Product specification - -
© Nexperia B.V. 2017. All rights reserved
PDTA144E_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 8 — 14 November 2011 15 of 17
Nexperia PDTA144E series
PNP resistor-equipped transistors; R1 = 47 k, R2 = 47 k
13. Legal information
13.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of de vice(s) descr ibed in th is docume nt may have cha nged since this docume nt was publis hed and ma y dif fer in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nexperia.com.
13.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liab ility for the consequences of
use of such information.
Short data sheet — A short dat a sheet is an extract from a full data sheet
with the same product type number(s) and tit le. A short data sh eet is intended
for quick reference only and shou ld not be rel ied u pon to cont ain det ailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall pre vail.
Product specificat io n — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the Nexperia product is
deemed to off er functions and qualities beyond tho se described in the
Product data sheet.
13.3 Disclaimers
Limited warr a nty and liability — Information in this document is believed to
be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall Nexperia be liable for any indirect, incidental,
punitive, special or consequ ential damages (including - wit hout limitatio n - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of Nexperia.
Right to make changes — Nexperia reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all informa tion supplied prior
to the publication hereof .
Suitability for use — Nexperia products are not designed,
authorized or warranted to be suit able for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of a Nexperia product can reasonably be expected
to result in perso nal injury, death or severe property or environmental
damage. Nexperia accepts no liability for inclusion and/or use of
Nexperia products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no
representation or warranty tha t such application s will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and ope ration of their applications
and products using Nexperia products, and Nexperia
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the Nexperia
product is suitable and fit for the customer’s applications and
products planned, as well as fo r the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
Nexperia does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using Nexperia
products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). Nexperia does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanent ly and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Nexperia
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nexperia.com/profile/terms, unless otherwise
agreed in a valid written individua l agreement. In case an individual
agreement is concluded only the ter ms and conditions of the respective
agreement shall apply. Nexperia hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of Nexperia products by customer.
No offer to sell or license — Not hing in this document may be interpret ed or
construed as an of fer t o sell product s that is open for accept ance or t he grant,
conveyance or implication of any license under any copyri ghts, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulatio ns. Export might require a prior
authorization from competent authorities.
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contain s data from the objective specification for product development.
Preliminary [short] dat a sheet Qualification This document contains data from the preliminary specification.
Product [short] dat a sheet Production This document contains the product specification.
© Nexperia B.V. 2017. All rights reserved
PDTA144E_SER All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 8 — 14 November 2011 16 of 17
Nexperia PDTA144E series
PNP resistor-equipped transistors; R1 = 47 k, R2 = 47 k
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
13.4 Trademarks
Notice: All refe renced brands, produc t names, service names and trademarks
are the property of their respect i ve ow ners.
14. Contact information
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Nexperia PDTA144E series
PNP resistor-equipped transistors; R1 = 47 k, R2 = 47 k
15. Contents
1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features and benefits. . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 Quick reference data . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2
4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
6 Thermal characteristics . . . . . . . . . . . . . . . . . . 4
7 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 7
8 Test information. . . . . . . . . . . . . . . . . . . . . . . . . 9
8.1 Quality information . . . . . . . . . . . . . . . . . . . . . . 9
9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
10 Packing information . . . . . . . . . . . . . . . . . . . . 10
11 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
12 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 14
13 Legal information. . . . . . . . . . . . . . . . . . . . . . . 15
13.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 15
13.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
13.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 15
13.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 16
14 Contact information. . . . . . . . . . . . . . . . . . . . . 16
15 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
© Nexperia B.V. 2017. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release:
14 November 2011
