MT9V024 WVGA 1/3-inch Stand-Alone CMOS Sensor 52-ball IBGA 5 Reasons the MT9V024 is Ideal for Automotive Systems 1 Reliable Operation in Extreme Temperatures The -40 to +105C operating range meets AEC-Q100 specifications, ensuring optimum performance in harsh environments. 2 Context Switching for Simultaneous Applications An additional register bank provides the ability to run two different imaging applications simultaneously from a single sensor. 3 Wide Dynamic Range for Superb High-Contrast Imaging Extended knee-points provide greater control and excellent output for excellent output in high-contrast conditions. 4 * * * * * * * * * * * * Lane departure warning Adaptive cruise control Collision avoidance Traffic sign recognition Automatic headlamp control Pedestrian protection Occupant identification Drowsiness detection Smart airbag deployment Vehicle theft identification Drive-by wire Blind spot detection Accurate Fast-Motion Capture The fine shutter control (via sub-row integration) of our TrueSNAPTM global shutter enables fast-moving object capture without image tearing. 5 Applications Small Footprint Measuring just 9 millimeters square, the MT9V024's automotive-grade ball grid array (BGA) package is one of the smallest in the industry. How to Buy Production and sample quantities of Aptina products may be ordered through qualified distributors. See our Web site for details. You may also request access to NDA data sheets and other technical documentation by visiting our Web site. MT9V024 Features * * * * * * * * * * * * Wide dynamic range Real-time exposure context-switching; dual register Operating temperature range up to +105C Tested to AEC-Q100 specifications TrueSNAPTM global shutter with simultaneous integrate and readout Monochrome, RGB Bayer, or RCCC (red/clear) color filters available Enhanced near-IR performance Programmable to any window size (QVGA, CIF, QCIF, etc.) Progressive or interlaced readout modes 2x2 and 4x4 binning at full resolution Simple two-wire serial interface Automatic and programmable functions: regionally weighted exposure, black level offset correction, horizontal blanking, vertical blanking, lighting control, windowing, left-right and top-bottom image reversal, regional gain, image decimation, manual or automatic high dynamic range Block Diagram aptina.com Products are warranted only to meet Aptina's production data sheet specifications. Products and specifications are subject to change without notice. Aptina, the Aptina logo, and TrueSNAP are trademarks of Aptina Imaging Corporation. All other trademarks are the property of their respective owners. (c) 2008 Aptina Imaging Corporation. All rights reserved. 12/31/08 Specifications Imaging Array * Optical Format: 1/3-inch * Active Array: 752(H) x 480(V) Speed/Output * Imaging Area: 4.55mm(H) x 2.97mm(V) * Frame Rate: 60 fps @ 752H x 480V; (higher frame rates at lower resolutions) * Data Rate: 27 Mp/s * Master Clock: 26 MHz * Data Format: Parallel/LVDS (serial); selectable 10 to 8 bits Sensitivity * Pixel Size: 6m x 6m * Dynamic Range: 80dB to >100dB * Responsivity: 4.8 V/lux-sec (550nm) * Minimum Detectable Light: sub-0.1 lux (mono), 5 lux (color) Power * Supply: 3.0-3.6V (3.3V nominal) * Consumption: <160mW @ 60 fps; <120W standby Temperature Range * Operating: -40C to +105C Storage: -50C to +125C Package: automotive qualified 52-ball iBGA (9mm x 9mm) or die