SA60CARL - ON Semiconductor

 Semiconductor Components Industries, LLC, 2002

June, 2002 – Rev. 7 1Publication Order Number:

SA5.0A/D

SA5.0A Series

500 Watt Peak Power

MiniMOSORB Zener

Transient Voltage

Suppressors

Unidirectional*

The SA5.0A series is designed to protect voltage sensitive

components from high voltage, high energy transients. They have

excellent clamping capability, high surge capability, low zener

impedance and fast response time. The SA5.0A series is supplied in

ON Semiconductor’s exclusive, cost-effective, highly reliable

Surmetic axial leaded package and is ideally-suited for use in

communication systems, numerical controls, process controls,

medical equipment, business machines, power supplies and many

other industrial/consumer applications.

Specification Features:

•Working Peak Reverse Voltage Range – 5 to 170 V

•Peak Power – 500 Watts @ 1 ms

•ESD Rating of Class 3 (>16 KV) per Human Body Model

•Maximum Clamp Voltage @ Peak Pulse Current

•Low Leakage < 1 A above 8.5 V

•UL 497B for Isolated Loop Circuit Protection

•Maximum Temperature Coefficient Specified

•Response Time is typically < 1 ns

Mechanical Characteristics:

CASE: Void-free, Transfer-molded, Thermosetting plastic

FINISH: All external surfaces are corrosion resistant and leads are

readily solderable

MAXIMUM LEAD TEMPERATURE FOR SOLDERING: 230°C,

1/16″ from the case for 10 seconds

POLARITY: Cathode indicated by polarity band.

MOUNTING POSITION: Any

MAXIMUM RATINGS

Rating Symbol Value Unit

Peak Power Dissipation (Note 1)

@ TL ≤ 25°CPPK 500 Watts

Steady State Power Dissipation

@ TL ≤ 75°C, Lead Length = 3/8″

Derated above TL = 75°C

PD3.0

Watts

mW/°C

Thermal Resistance, Junction–to–Lead RJL 33.3 °C/W

Forward Surge Current (Note 2)

@ TA = 25°CIFSM 70 Amps

Operating and Storage Temperature Range TJ, Tstg – 55 to +175 °C

1. Nonrepetitive current pulse per Figure 4 and derated above T A = 25°C per Fig-

ure 2.

2. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses

per minute

*Please see SA5.0CA – SA170CA for Bidirectional devices.

Device Package Shipping

ORDERING INFORMATION

SAxxxA Axial Lead 1000 Units/Box

SAxxxARL* Axial Lead 5000/Tape & Reel

AXIAL LEAD

CASE 59

PLASTIC

L = Assembly Location

SAxxxA = ON Device Code

YY = Year

WW = Work Week

xxxA

YYWW

Cathode Anode

Devices listed in

bold, italic

are ON Semiconductor

Preferred devices. Preferred devices are recommended

choices for future use and best overall value.

http://onsemi.com

*SA8.0A, SA130A, and SA160A Not Available in

5000/Tape & Reel.

SA5.0A Series

http://onsemi.com

ELECTRICAL CHARACTERISTICS (TA = 25°C unless

otherwise noted, VF = 3.5 V Max. @ IF (Note 6) = 35 A)

Symbol Parameter

IPP Maximum Reverse Peak Pulse Current

VCClamping Voltage @ IPP

VRWM Working Peak Reverse Voltage

IRMaximum Reverse Leakage Current @ VRWM

VBR Breakdown Voltage @ IT

ITTest Current

VBR Maximum Temperature Variation of VBR

IFForward Current

VFForward Voltage @ IFUni–Directional TVS

IPP

VRWM

VCVBR VF

SA5.0A Series

http://onsemi.com

ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 3.5 V Max. @ IF (Note 6) = 35 A)

VRWM

Breakdown Voltage VC @ IPP (Note 5)

Device

RWM

(Note 3) IR @ VRWM VBR (Note 4) (Volts) @ ITVCIPP VBR

Device

Marking Volts A Min Nom Max mA Volts A mV/°C

SA5.0A SA5.0A 5 600 6.4 6.7 7 10 9.2 54.3 5

SA6.0A SA6.0A 6 600 6.67 7.02 7.37 10 10.3 48.5 5

SA7.0A SA7.0A 7 150 7.78 8.19 8.6 10 12 41.7 6

SA7.5A SA7.5A 7.5 50 8.33 8.77 9.21 1 12.9 38.8 7

SA8.0A* SA8.0A* 8 25 8.89 9.36 9.83 1 13.6 36.7 7

SA8.5A SA8.5A 8.5 5 9.44 9.92 10.4 1 14.4 34.7 8

SA9.0A SA9.0A 9 1 10 10.55 11.1 1 15.4 32.5 9

SA10A SA10A 10 1 11.1 11.7 12.3 1 17 29.4 10

SA11A SA11A 11 1 12.2 12.85 13.5 1 18.2 27.4 11

SA12A SA12A 12 1 13.3 14 14.7 1 19.9 25.1 12

SA13A SA13A 13 1 14.4 15.15 15.9 1 21.5 23.2 13

SA14A SA14A 14 1 15.6 16.4 17.2 1 23.2 21.5 14

SA15A SA15A 15 1 16.7 17.6 18.5 1 24.4 20.6 16

SA16A SA16A 16 1 17.8 18.75 19.7 1 26 19.2 17

SA17A SA17A 17 1 18.9 19.9 20.9 1 27.6 18.1 19

SA18A SA18A 18 1 20 21.05 22.1 1 29.2 17.2 20

SA20A SA20A 20 1 22.2 23.35 24.5 1 32.4 15.4 23

SA22A SA22A 22 1 24.4 25.65 26.9 1 35.5 14.1 25

SA24A SA24A 24 1 26.7 28.1 29.5 1 38.9 12.8 28

SA26A SA26A 26 1 28.9 30.4 31.9 1 42.1 11.9 30

SA28A SA28A 28 1 31.1 32.75 34.4 1 45.4 11 31

SA30A SA30A 30 1 33.3 35.05 36.8 1 48.4 10.3 36

SA33A SA33A 33 1 36.7 38.65 40.6 1 53.3 9.4 39

SA36A SA36A 36 1 40 42.1 44.2 1 58.1 8.6 41

SA40A SA40A 40 1 44.4 46.55 49.1 1 64.5 7.8 46

SA43A SA43A 43 1 47.8 50.3 52.8 1 69.4 7.2 50

SA45A SA45A 45 1 50 52.65 55.3 1 72.7 6.9 52

SA48A SA48A 48 1 53.3 56.1 58.9 1 77.4 6.5 56

SA51A SA51A 51 1 56.7 59.7 62.7 1 82.4 6.1 61

SA58A SA58A 58 1 64.4 67.8 71.2 1 93.6 5.3 70

SA60A SA60A 60 1 66.7 70.2 73.7 1 96.8 5.2 71

SA64A SA64A 64 1 71.1 74.85 78.6 1 103 4.9 76

SA70A SA70A 70 1 77.8 81.9 86 1 113 4.4 85

SA78A SA78A 78 1 86.7 91.25 95.8 1 126 4.0 95

SA90A SA90A 90 1 100 105.5 111 1 146 3.4 110

SA100A SA100A 100 1 111 117 123 1 162 3.1 123

SA110A SA110A 110 1 122 128.5 135 1 177 2.8 133

SA120A SA120A 120 1 133 140 147 1 193 2.5 146

SA130A* SA130A* 130 1 144 151.5 159 1 209 2.4 158

SA150A SA150A 150 1 167 176 185 1 243 2.1 184

SA160A* SA160A* 160 1 178 187.5 197 1 259 1.9 196

SA170A SA170A 170 1 189 199 209 1 275 1.8 208

NOTES:

3. MiniMOSORB transients suppressor is normally selected according to the maximum working peak reverse voltage (VRWM), which

should be equal to or greater than the dc or continuous peak operating voltage level.

4. VBR measured at pulse test current IT at an ambient temperature of 25°C.

5. Surge current waveform per Figure 4 and derate per Figures 1 and 2.

6. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute

*Not Available in the 5000/Tape & Reel.

SA5.0A Series

http://onsemi.com

100

0.1

0.1 s1s10s 100 s1ms 10ms

P, PEAK POWER (kW)

tp, PULSE WIDTH

Figure 1. Pulse Rating Curve

NONREPETITIVE PULSE

WAVEFORM SHOWN IN

FIGURE 4 100

00 25 50 75 100 125 150 175 200

PEAK PULSE DERATING IN % OF

PEAK POWER OR CURRENT @ TA= 25 C

TA, AMBIENT TEMPERATURE (°C)

Figure 2. Pulse Derating Curve

10,000

1000

100

100.1 1 10 100 1000

C, CAPACITANCE (pF)

VBR, BREAKDOWN VOLTAGE (VOLTS)

MEASURED @

ZERO BIAS

Figure 3. Capacitance versus Breakdown Voltage

100

001234

t, TIME (ms)

VALUE (%)

PULSE WIDTH (tp) IS

DEFINED AS THAT POINT

WHERE THE PEAK

CURRENT DECAYS TO

50% OF IPP.

PEAK VALUE – IPP

HALF VALUE – IPP

Figure 4. Pulse Waveform

00 25 50 75 100 125 150 175 200

PD, STEADY STATE POWER DISSIPATION (WATTS)

TL, LEAD TEMPERATURE (°C)

3/8″

Figure 5. Steady State Power Derating

tr ≤ 10 s

MEASURED @

(VRWM)tP

SA5.0A Series

http://onsemi.com

UL RECOGNITION*

The entire series including the bidirectional CA suffix has

Underwriters Laboratory Recognition for the classification

of protectors (QVGV2) under the UL standard for safety

497B and File #E 116110. Many competitors only have one

or two devices recognized or have recognition in a

non-protective category. Some competitors have no

recognition at all. With the UL497B recognition, our parts

successfully passed several tests including Strike Voltage

Breakdown test, Endurance Conditioning, Temperature test,

Dielectric Voltage-Withstand test, Discharge test and

several more.

Whereas, some competitors have only passed a

flammability test for the package material, we have been

recognized for much more to be included in their protector

category.

*Applies to SA5.0A, CA – SA170A, CA.

SA5.0A Series

http://onsemi.com

OUTLINE DIMENSIONS

500 Watt Peak Power MiniMOSORB

Transient Voltage Suppressors – Axial Leaded

MINI MOSORB

CASE 59–09

ISSUE S

DIM MIN MAX MIN MAX

MILLIMETERSINCHES

A5.80 7.600.228 0.299

B2.60 3.600.102 0.142

D0.71 0.860.028 0.034

K25.44 ---1.000 ---

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH.

3. 59-04 OBSOLETE, NEW STANDARD 59-09.

4. 59-03 OBSOLETE, NEW STANDARD 59-10.

5. ALL RULES AND NOTES ASSOCIATED WITH

JEDEC DO-41 OUTLINE SHALL APPLY.

6. POLARITY DENOTED BY CATHODE BAND.

7. LEAD DIAMETER NOT CONTROLLED WITHIN F

DIMENSION.

SA5.0A Series

http://onsemi.com

Notes

SA5.0A Series

http://onsemi.com

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make

changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any

particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all

liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or

specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be

validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.

SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death

may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC

and its officers, employees, subsidiaries, af filiates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees

arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that

SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.

PUBLICATION ORDERING INFORMATION

JAPAN: ON Semiconductor, Japan Customer Focus Center

4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031

Phone: 81–3–5740–2700

Email: r14525@onsemi.com

ON Semiconductor Website: http://onsemi.com

For additional information, please contact your local

Sales Representative.

SA5.0A/D

MiniMOSORB and Surmetic are trademarks of Semiconductor Components Industries, LLC.

Literature Fulfillment:

Literature Distribution Center for ON Semiconductor

P.O. Box 5163, Denver, Colorado 80217 USA

Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada

Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada

Email: ONlit@hibbertco.com

N. American Technical Support: 800–282–9855 Toll Free USA/Canada