169
Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Numeric LED
Numeric LED
■ General Description
Sharp can supply wide color line-up for numeric LEDs-GaAlAs on GaAlAs
(double hetero) super-luminosity U series (red), S series (sunset orange), K
series (green). In addition to them, dichromatic type has realized an expressive
display, changing the emission color according to display contents.
Sharp can also supply various character height (7.62mm to 38.1mm), and
various digits type (1digit to 5digits) for your applications.
■ Structure
Numeric LEDs are classified into 2 types ; substrate type and mold type as shown below.
Substrate type employs thin package and can save the mount space. Mold type has realized
high reliability because it is molded by resin.
,,
,,,
,
,,
,,,
,
,,
,,,
,,
,,
,,,
,,
Reflective case
Scattering sheet
Reflective case
Substrate
Lead pin
Epoxy resin
Lead frame
Mold Type Substrate Type
GL
qType: internal connection
eCharacter size
wRadiation color
1-digit GL eSerial No.
rNo. of digits
wRadiation color
qType: internal connection
Multi-digits
Numbering system
3
6
7
8
9
Multi-digits
Dynamic drive circuit
Multi-digits Cathode common
Multi-digits Anode common
1-digit Cathode common
1-digit Anode common
Radiation color
Red
Red(Super-luminosity)
Red(High-luminosity)
Red
Sunset orange
Yellow
Yellow-green
Green
Yellow-green+Red
Yellow-green+Red(
High-luminosity
)
Series
P
U
T
D
S
H
E
K
ED
ET
03,030
04,040
156
56
08
100
15
8.0mm
10.16mm
14.12mm
14.22mm
20.32mm
25.4mm
38.1mm
qType: internal connection wRadiation color eCharacter size rNo. of digits
GL3E305
GL6S220
GL9D030 GL9H040 GL8T156
GL3H412
GL3T508D
170
Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Surface Mount Type Numeric LED
■ General Description
Sharp's GL8D03M series, GL8D04M series, GL8D56M series are 1-digit, thin
package surface mount type numeric LEDs. (character height: 8.0/10.16/14.22
mm). It is unnecessary to adjust the mounting height because the thickness of
each series is the same. They are suited for measuring equipment and various
thin type display systems.
■ Model Line-up
Type
Character
height
(mm)
Radiation
color
Common
D
Red E
Yellow-green Outline Dimensions
Page Figure
Mold
type
8.0 Anode GL9D03M GL9E03M 180 1
Cathode GL8D03M GL8E03M
10.16 Anode GL9D04M GL9E04M 180 2
Cathode GL8D04M GL8E04M
14.22 Anode GL9D56M GL9E56M 180 3
Cathode GL8D56M GL8E56M
Model No.
Forward current
IF
(mA)
Peak forward current
*1
IFM
(mA)
Derating factor
Reverse voltage
VR
(V)
Operating temperature
Topr
(˚C)
Storage temperature
Tstg
(˚C)
DC
(mA/˚C) Pulse
(mA/˚C)
GL9E03M/GL8E03M
Yellow-green
15 50 1.91 6.36 5 -30 to +70 -40 to +80
GL9D03M/GL8D03M Red 20 50 2.54 6.36 5
GL9E04M/GL8E04M
Yellow-green
15 50 1.91 6.36 5 -30 to +70 -40 to +80
GL9D04M/GL8D04M Red 20 50 2.54 6.36 5
GL9E56M/GL8E56M
Yellow-green
15 50 1.91 6.36 5 -30 to +70 -40 to +80
GL9D56M/GL8D56M Red 20 50 2.54 6.36 5
Model No. Forward current
VF (V)
Luminous intensity
Peak emission wavelength
Spectrum radiation bandwidth
Reverse current
IV (mcd)
TYP. λp(nm)
TYP. ∆λ(nm)
TYP. IF
(mA) IR (µA)
MAX. VR
(V)
TYP. MAX.
GL9E03M/GL8E03M
Yellow-green
2.0 2.5 2.5 565 30 10 10 4
GL9D03M/GL8D03M Red 1.85 2.3 2.3 635 35 10 10 4
GL9E04M/GL8E04M
Yellow-green
2.0 2.5 3.0 565 30 10 10 4
GL9D04M/GL8D04M Red 1.85 2.3 3.0 635 35 10 10 4
GL9E56M/GL8E56M
Yellow-green
2.0 2.5 4.0 565 30 10 10 4
GL9D56M/GL8D56M Red 1.85 2.3 4.0 635 35 10 10 4
■ Absolute Maximum Ratings (Figures shown below are values per segment.)
■ Electro-optical Characteristics (Figures shown below are values per segment.)
(Ta=25˚C)
*1 Duty ratio=1/10, pulse width=0.1ms
(Ta=25˚C)
GL9D04M
171
Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Numeric LED
Dichromatic Numeric LED
■ General Description
Sharp's dichromatic numeric LEDs GL9ED08 series, GL8ED100 series are 1-digit
large size numeric LEDs(character height: 20.32/25.4mm). They have realized
expressive display, changing the radiation color according to display type.
They are suited for measuring equipment, amusement equipment, and various
displays.
Type
Mold
type
20.32
25.40
181
180
8
6
Anode
Anode
Cathode
GL9ED08
GL9ED100
GL8ED100 GL9ET100
GL8ET100
Character height
(mm)
Radiation color
common
E D
Yellow-green+Red
E T
Yellow-green+Red(High-luminosity)
Outline dimensions
Page Figure
■ Model Line-up
Model No.
Forward current
IF
(mA)
Peak forward current*1
IFM
(mA)
Derating factor
DC
(mA/˚C) Pulse
(mA/˚C)
Reverse voltage
VR
(V)
Operating temperature
Topr.
(˚C)
Storage temperature
Tstg.
(˚C)
GL9ED08
GL8ED100
GL9ED100
GL8ET100
GL9ET100
20
20
20
20
20
50
50
50
50
100
0.36
0.36
0.36
0.36
0.36
0.91
0.91
0.91
0.91
1.82
5
6
6
6
6
-30 to +70
-30 to +70
-30 to +70
-40 to +80
-40 to +80
-40 to +80
Yellow-green
Yellow-green
Red
Yellow-green
Red(High-luminosity)
*1 Duty ratio=1/10, Pulse width=0.1ms
(Ta=25˚C)
■ Absolute Maximum Ratings (Figures shown below are values per segment.)
Model No.
Forward current
VF(V)
TYP. MAX.
Luminous intensity
IV(mcd)
TYP.
Peak emission wavelength
λp(nm)
TYP.
Spectrum radiation bandwidth
∆λ(nm)
TYP. IF
(mA)
VR
(V)
Reverse current
IR(µA)
MAX.
GL9ED08
GL8ED100
GL9ED100
GL8ET100
GL9ET100
2.0
4.0
3.7
4.0
3.4
2.5
5.0
5.0
5.0
4.4
3.0
3.5
3.5
3.5
4.8
565
565
635
565
660
30
30
35
30
20
10
10
10
10
10
10
10
10
10
10
4
5
5
5
5
Yellow-green
Yellow-green
Red
Yellow-green
Red(High-luminosity)
(Ta=25˚C)
■ Electro-optical Characteristics (Figures shown below are values per segment.)
GL8ED100
172
Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Super-luminosity/High-luminosity Numeric LED
181
180
182
183
Digit
1-digit
Mold Type
Multi-digits
Mold Type
Type Type of display
Outline dimensions
Model No. Luminous intensity
(mcd)
TYP.
Model No. Luminous intensity
(mcd)
TYP. Page Figure
*1Common pins
Character
height
(mm)
U (Red) T (Red)
8.0
10.16
14.12
20.32
25.4
38.1
10.16
8.0
7.6
11
10
9
7
5
4
13
18
20
A
K
A
K
A
K
A
K
A
K
A
A
K
A
K
A
K
GL9U100
GL9U15
35.0
27.0
GL9T030
GL8T030
GL9T040
GL8T040
GL9T156
GL8T156
GL9T08
GL8T08
GL9T100
GL8T100
GL7T201
GL6T201
GL3T422
GL3T421
GL3T508D
GL3T507D
4.0
4.0
4.25
4.25
5.25
5.25
2.2
2.2
9.5
9.5
4.25
4.25
1.5
1.5
1.5
1.5
*1 A: Anode common K: Cathode common * Production after order confirmation
* As for current conditions, refer to IF in electro-optical characteristics.
(Ta=25˚C)
■ Super-luminosity/High-luminosity Numeric LED Figures shown below are values per segment.
Character height
(mm)
Forward current
IF
(mA)
Peak forward current
IFM*1
(mA)
Derating factor
(mA/ ˚C)
Reverse voltage
VR
(V)
Operating temperature
Topr.
(˚C)
Storage temperature
Tstg.
(˚C)
Radiation
color
*1 Duty ratio=1/10, Pulse width=0.1ms
*2 U type duty ratio=1/16, pulse width=0.1ms
8.0/10.16/14.12/20.32
25.4, 38.1
25.4, 38.1
T
U
T
20
20
20
100
150*2
100
0.36
0.36
0.36
5
6
5
-30 to +70
-30 to +70
-30 to +70
-40 to +80
-40 to +80
-40 to +80
1.82
2.73
1.82
DC Pulse
(Ta=25˚C)
■ Absolute Maximum Ratings Figures shown below are values per segment.
Character height
(mm)
Forward current
VF
Peak emission wavelength
λp(nm)
TYP.
Radiation
color
8.0/10.16/14.12/20.32
25.4, 38.1
25.4, 38.1
T
U
T
1.7
3.5
3.4
2.2
4.8
4.4
660
660
660
Spectrum radiation bandwidth
∆λ(nm)
TYP. IF
(mA)
20
20
20
10
10
10
Reverse current
IR(µA)
MAX. VR
(V)
10
100
10
4
5
4
TYP. MAX
(Ta=25˚C)
■ Electro-optical Characteristics Figures shown below are values per segment.
173
Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Numeric LED
Numeric LED
Mold Type
Page for ratings/characteristics diagrams
Type Type of display
Outline dimensions
P
Red
176
Page Figure
*1Common pins
Radiation color
Character
height
(mm)
8.0
10.16
14.12
25.4
11
10
9
5
A
K
A
K
A
K
A
K
GL9P030
GL8P030
GL9P040
GL8P040
GL9P156
GL8P156
181
180
D
Red
177
GL9D030
GL8D030
GL9D040
GL8D040
GL9D156
GL8D156
GL9D100
GL8D100
S
Sunset orange
178
GL9S030
GL8S030
GL9S040
GL8S040
GL9S156
GL8S156
GL9S100
GL8S100
H
Yellow
178
GL9H030
GL8H030
GL9H040
GL8H040
GL9H156
GL8H156
GL9H100
GL8H100
E
Yellow-green
179
GL9E030
GL8E030
GL9E040
GL8E040
GL9E156
GL8E156
GL9E100
GL8E100
K
Green
179
GL9K030
GL8K030
GL9K040
GL8K040
GL9K156
GL8K156
*1 A: Anode common K: Cathode common
■ 1-digit
Character
height
(mm)
Forward current
IF
(mA)
Peak forward current
IFM
(mA)
Derating factor
(mA/˚C)
Reverse voltage
VR
(V)
Operating temperature
Topr.
(˚C)
Storage temperature
Tstg.
(˚C)
Radiation color
6.0
6.2
7.6
8.0
8.4
10.16
14.12
20.32
(common)
25.4
P
D
S
H
E
K
D
S
H
E
50
50
50
50
50
50
50
50
50
50
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
5
5
5
5
5
5
6
6
6
6
10
(15)*2
20
20
20
15
15
20
20
20
20
0.18
(0.27)
0.36
0.36
0.36
0.27
0.27
0.36
0.36
0.36
0.36
-30 to +70
-30 to +70
-30 to +70
-30 to +70
-30 to +70
-30 to +70
-30 to +70
-30 to +70
-30 to +70
-30 to +70
-40 to +80
-40 to +80
-40 to +80
-40 to +80
-40 to +80
-40 to +80
-40 to +80
-40 to +80
-40 to +80
-40 to +80
DC Pulse
(Ta=25˚C)
*1 Duty ratio=1/10, Pulse width=0.1ms
*2 ( ): figures for GL8/9P040, GL8/9P056, GL8/9P156, GL6/7P220
*1
■ Absolute Maximum Ratings(Mold Type) Figures shown below are values per segment.
Character
height
(mm)
Forward current
IF
(mA)
Peak forward current
IFM
(mA)
Derating factor
(mA/˚C)
Reverse voltage
VR
(V)
Operating temperature
Topr.
(˚C)
Storage temperature
Tstg.
(˚C)
Radiation color
7.6 P 50 1.11 515 0.15 -10 to +60 -20 to +70
DC Pulse
(Ta=25˚C)
*1 Duty ratio=1/10, Pulse width=0.1ms
*1
■ Absolute Maximum Ratings(Substrate Type) Figures shown below are values per segment.
174
Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Numeric LED
Mold Type
Page for ratings/characteristics diagrams
6.0
10.16
14.12
8.0
6.2
8.0
8.4
7.6
7.6
15
13
12
16
17
18
19
20
14
A
K
A
K
A
K
A
K
A
K
A
K
A
K
A
K
A
181
183
182
183
182
176
GL7P202
GL6P202
GL7P201
GL6P201
GL7P220
GL3P306
GL3P305
GL3P412
GL3P411
GL3P422
GL3P421
GL3P404
GL3P403
GL3P508D
GL3P507D
GL7P208U▲
177
GL7D201
GL6D201
GL7D220
GL6D220
GL3D305
GL3D404
GL3D403
178
GL7S220
GL6S220
178
GL7H202
GL7H201
GL7H220
GL6H220
GL3H412
179
GL7E202
GL6E202
GL7E201
GL6E201
GL7E220
GL3E306
GL3E305
GL3E412
GL3E411
GL3E422
GL3E404
GL3E403
*1 A: Anode common K: Cathode common
Substrate
Type
Type Type of display
Outline dimensions
P
Red Page Figure
*1Common pins
Radiation color
Character
height
(mm)
D
Red
S
Sunset orange
H
Yellow
E
Yellow-green
The model marked with ▲ may not be available in the near future. Contact Sharp sales personnel for details before use.
■ Multi-digits
Character height
(mm)
Forward voltage
VF(V)
Peak emission wavelength
λp(nm)
TYP.
Radiation
color
6.0
6.2
7.6
8.0
8.2
8.4
10.16
14.12
P
D
S
H
E
K
D
S
H
E
1.9
1.85
1.9
1.9
2.0
2.0
3.6
3.8
3.8
4.0
2.5
2.3
2.5
2.5
2.5
2.5
4.6
5.0
5.0
5.0
695
635
610
585
565
555
635
610
585
565
Spectrum radiation bandwidth
∆λ(nm)
TYP. IF
(mA)
100
35
35
30
30
30
35
35
30
30
5
10
10
10
10
10
10
10
10
10
Reverse current
IR(µA)
MAX. VR
(V)
10
10
10
10
10
10
10
10
10
10
4
4
4
4
4
4
5
4
5
5
TYP. MAX
(Ta=25˚C)
25.4
■ Electro-optical Characteristics(Mold Type) Figures shown below are values per segment.
Forward voltage
VF(V)
Peak emission wavelength
λp(nm)
TYP.
7.6 P 1.9 2.5 695
Spectrum radiation bandwidth
∆λ(nm)
TYP. IF
(mA)
100 5
Reverse current
IR(µA)
MAX. VR
(V)
10 4
TYP. MAX
(Ta=25˚C)
Character height
(mm) Radiation
color
■ Electro-optical Characteristics(Substrate Type) Figures shown below are values per segment.
175
Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Numeric LED
Numeric LED
Mold Type Type
Digit
P
Red
TYP
Character height
(mm)
8.0
10.16
14.12
25.4
6.0
10.16
14.12
8.0
6.2
8.0
8.4
7.6
7.6
1.0
0.8
1.0
0.3
0.8
1.0
1.0
0.25
0.66
0.3
0.3
0.2
4.14
3.0
4.0
6.38
3.8
4.0
2.80
0.8
1.5
4.3
3.9
4.8
4.5
1.25
2.6
2.5
4.5
4.6
0.35
4.1
4.5
0.6
2.5
3.0
3.0
3.5
1.8
3.5
3.0
2.85
0.7
2.2
2.0
1.56
1.75
2.1
GL9❏030
GL9❏040
GL9❏156
GL9❏100
GL7❏202
GL7❏201
GL7❏220
GL3❏306
GL3❏412
GL3❏422
GL3❏404
GL3❏508D
GL7❏208U▲
GL8❏030
GL8❏040
GL8❏156
GL8❏100
GL6❏202
GL6❏201
GL6❏220
GL3❏305
GL3❏411
GL3❏421
GL3❏403
GL3❏507D
D
Red
TYP
S
Sunset orange
TYP
H
Yellow
TYP
E
Yellow-green
TYP
K
Green
TYP
Series
Radiation color
1-digit
2-digits
3-digits
4-digits
5-digits
2-digit
Anode common
Cathode common
(Ta=25˚C)
* As for current conditions, refer to IF in electro-optical characteristics
The model marked with ▲ may not be available in the near future. Contact Sharp sales personnel for details before use.
Substrate
Type
■ Luminous Intensity(Unit:mcd) Figures shown below are values per segment.
Data bass Decoder/driver
LED display
D.P
a
b
c
d
e
f
g
D.P
a
Vcc
LED display
Digit driver
Digit scannerProcessor
7 segment decoder
b
c
d
e
f
g
Static drive circuit Dynamic drive circuit
176
Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Numeric LED Characteristics Diagrams
* In case of 25.4/38.1mm: value per 1segment 1chip
P series
U series
Mold type
Substrate type
0
5
10
15
20
25
30
35
-20 0 20 40 60 10080
Substrate type
Mold type
0
10
20
30
40
50
60
70
-20 0 20 40 60 10080
(Duty ratio1/10)
0.5
2
1
3
5
10
20
50
100
1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
(Ta=25˚C)
1.1 1.3 1.5 1.7 1.9 2.1 2.3 2.5
1
2
5
200
100
20
50
10
500
0.1 0.2 0.5 1 2 5 10 20 50
(Ta=25˚C)
(1F=5mA/seg)
10
20
50
200
100
500
1000
-20 0 20 40 60 10080
5
10
30
50
100
300
500
1/50 1/20 1/10 1/5 1/2 1
(Ta=25˚C)
0
5
10
15
20
25
30
35
-20 0 20 40 60 10080
0
50
100
150
-20 0 20 40 60 10080
(Duty ratio1/10)
1
2
5
200
100
20
50
10
500
0.1 0.2 0.5 12 51020 50
(Ta=25˚C)
(1F=20mA)
10
20
50
200
100
500
1000
-20 0 20 40 60 10080
150
5
10
30
50
100
300
500
1/50 1/20 1/10 1/5 1/2 1
(Ta=25˚C)
0.5
2
1
3
5
10
20
50
100
2.0 2.4 2.8 3.2 3.6 4.0 4.4 4.8
(Ta=25˚C)
2.2 2.6 3.0 3.4 3.8 4.2 4.6 5.0
Forward Current Derating Curve Forward Current vs. Forward Voltage Luminous Intensity vs. Ambient Temperature
Ambient temperature Ta(˚C) Forward voltage VF(V/seg) Ambient temperature Ta(˚C)
Forward current IF(mA/seg)
Forward current IF(mA/seg)
Relative luminous intensity(%)
Peak Forward Current Derating Curve Luminous Intensity vs. Forward Current Duty Ratio vs. Peak Forward Current
Peak forward current IFM(mA/seg)
Relative luminous intensity(%)
Peak forward current IF(mA/seg)
Ambient temperature Ta(˚C) Forward current IF(mA/seg) Duty ratio DR
Mold type
Substrate type
Forward Current Derating Curve Forward Current vs. Forward Voltage* Luminous Intensity vs. Ambient Temperature
Ambient temperature Ta(˚C) Forward voltage VF(V/seg) Ambient temperature Ta(˚C)
Forward current IF(mA/seg)
Forward current IF(mA/seg)
Relative luminous intensity(%)
Peak Forward Current Derating Curve Luminous Intensity vs. Forward Current Duty Ratio vs. Peak Forward Current
Ambient temperature Ta(˚C) Forward current IF(mA/seg) Duty ratio DR
Peak forward current IFM(mA/seg)
Relative luminous intensity(%)
Peak forward current IF(mA/seg)
177
Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Numeric LED
Numeric LED Characteristics Diagrams
T series
D series
* In case of 25.4mm: value per 1segment 1chip
* In case of 25.4mm: value per 1segment 1chip
(Duty ratio1/10)
0
10
20
30
40
50
60
70
-20 0 20 40 60 10080
1.1 1.3 1.5 1.7 1.9 2.1 2.3 2.5
0.5
2
1
3
5
10
20
50
100
1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
(Ta=25˚C)
1
2
5
200
100
20
50
10
500
0.1 0.2 0.5 1 2 5 10 20 50
(Ta=25˚C)
(1F=20mA/seg)
10
20
50
200
100
500
1000
-20 0 20 40 60 10080
5
10
30
50
100
300
500
1/50 1/20 1/10 1/5 1/2 1
(Ta=25˚C)
0
10
20
30
40
50
60
70
-20 0 20 40 60 10080
0
10
20
30
40
50
60
70
-20 0 20 40 60 10080
0
50
100
150
200
250
300
350
-20 0 20 40 60 10080
(Duty ratio1/10)
0.5
2
1
3
5
10
20
50
100
1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
(Ta=25˚C)
1.1 1.3 1.5 1.7 1.9
2.1 2.3 2.5
1
2
5
200
100
20
50
10
500
0.1 0.2 0.5 1 2 5 10 20 50
(Ta=25˚C)
(1F=20mA/seg)
10
20
50
200
100
500
1000
-20 0 20 40 60 10080
5
10
30
50
100
300
500
1/50 1/20 1/10 1/5 1/2 1
(Ta=25˚C)
Forward Current Derating Curve Forward Current vs. Forward Voltage* Luminous Intensity vs. Ambient Temperature
Ambient temperature Ta(˚C) Forward voltage VF(V/seg) Ambient temperature Ta(˚C)
Forward current IF(mA/seg)
Forward current IF(mA/seg)
Relative luminous intensity(%)
Mold type
Peak Forward Current Derating Curve Luminous Intensity vs. Forward Current Duty Ratio vs. Peak Forward Current
Ambient temperature Ta(˚C) Forward current IF(mA/seg) Duty ratio DR
Peak forward current IFM(mA/seg)
Relative luminous intensity(%)
Peak forward current IF(mA/seg)
Mold type
Mold type
Forward Current Derating Curve Forward Current vs. Forward Voltage* Luminous Intensity vs. Ambient Temperature
Ambient temperature Ta(˚C) Forward voltage VF(V/seg) Ambient temperature Ta(˚C)
Forward current IF(mA/seg)
Forward current IF(mA/seg)
Relative luminous intensity(%)
Mold type
Substrate type
Peak Forward Current Derating Curve Luminous Intensity vs. Forward Current Duty Ratio vs. Peak Forward Current
Ambient temperature Ta(˚C) Forward current IF(mA/seg) Duty ratio DR
Peak forward current IFM(mA/seg)
Relative luminous intensity(%)
Peak forward current IF(mA/seg)
Mold type
Substrate type
Mold type
Substrate type
178
Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Numeric LED Characteristics Diagrams
S series
H series
* In case of 25.4mm: value per 1segment 1chip
* In case of 25.4mm: value per 1segment 1chip
0
5
10
15
20
25
30
35
-20 0 20 40 60 10080
0
10
20
30
40
50
60
70
-20 0 20 40 60 10080
(Duty ratio 0.1)
0.5
2
1
3
5
10
20
50
100
1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
(Ta=25˚C)
1.1 1.3 1.5 1.7 1.9 2.1 2.3 2.5
1
2
5
200
100
20
50
10
500
0.1 0.2 0.5 1 2 5 10 20 50
(Ta=25˚C)
(1F=20mA/seg)
10
20
50
200
100
500
1000
-20 0 20 40 60 10080
5
10
30
50
100
300
500
1/50 1/20 1/10 1/5 1/2 1
(Ta=25˚C)
0
5
10
15
20
25
30
35
-20 0 20 40 60 10080
0
10
20
30
40
50
60
70
-20 0 20 40 60 10080
(Duty ratio 0.1)
0.5
2
1
3
5
10
20
50
100
1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
(Ta=25˚C)
1.1 1.3 1.5 1.7 1.9 2.1 2.3 2.5
1
2
5
200
100
20
50
10
500
0.1 0.2 0.5 12 51020 50
(Ta=25˚C)
(1F=20mA/seg)
10
20
50
200
100
500
1000
-20 0 20 40 60 10080
5
10
30
50
100
300
500
1/50 1/20 1/10 1/5 1/2 1
(Ta=25˚C)
Forward Current Derating Curve Forward Current vs. Forward Voltage* Luminous Intensity vs. Ambient Temperature
Ambient temperature Ta(˚C) Forward voltage VF(V/seg) Ambient temperature Ta(˚C)
Forward current IF(mA/seg)
Forward current IF(mA/seg)
Relative luminous intensity(%)
Peak Forward Current Derating Curve Luminous Intensity vs. Forward Current Duty Ratio vs. Peak Forward Current
Ambient temperature Ta(˚C) Forward current IF(mA/seg) Duty ratio DR
Peak forward current IFM(mA/seg)
Relative luminous intensity(%)
Peak forward current IF(mA/seg)
Forward Current Derating Curve Forward Current vs. Forward Voltage* Luminous Intensity vs. Ambient Temperature
Ambient temperature Ta(˚C) Forward voltage VF(V/seg) Ambient temperature Ta(˚C)
Forward current IF(mA/seg)
Forward current IF(mA/seg)
Relative luminous intensity(%)
Peak Forward Current Derating Curve Luminous Intensity vs. Forward Current Duty Ratio vs. Peak Forward Current
Ambient temperature Ta(˚C) Forward current IF(mA/seg) Duty ratio DR
Peak forward current IFM(mA/seg)
Relative luminous intensity(%)
Peak forward current IF(mA/seg)
179
Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Numeric LED
Numeric LED Characteristics Diagrams
E series
K series
* In case of 25.4mm: value per 1segment 1chip
0
5
10
15
20
25
30
35
-20 0 20 40 60 10080
25.4mm
0
10
20
30
40
50
60
70
-20 0 20 40 60 10080
(Duty 1/10)
0.5
2
1
3
5
10
20
50
100
1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
(Ta=25˚C)
1.1 1.3 1.5 1.7 1.9 2.1 2.3 2.5
1
2
5
200
100
20
50
10
500
0.1 0.2 0.5 12 51020 50
(Ta=25˚C)
(1F=20mA/seg)
10
20
50
200
100
500
1000
-20 0 20 40 60 10080
Substrate/Mold type
5
10
30
50
100
300
500
1/50 1/20 1/10 1/5 1/2 1
(Ta=25˚C)
0
5
10
15
20
25
30
35
-20 0 20 40 60 10080
0
10
20
30
40
50
60
70
-20 0 20 40 60 10080
(Duty ratio 0.1)
0.5
2
1
3
5
10
20
50
100
1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
(Ta=25˚C)
1.1 1.3 1.5 1.7 1.9 2.1 2.3 2.5
1
2
5
200
100
20
50
10
500
0.1 0.2 0.5 12 51020 50
(Ta=25˚C)
(1F=20mA/seg)
10
20
50
200
100
500
1000
-20 0 20 40 60 10080
5
10
30
50
100
300
500
1/50 1/20 1/10 1/5 1/2 1
(Ta=25˚C)
Forward Current Derating Curve Forward Current vs. Forward Voltage* Luminous Intensity vs. Ambient Temperature
Ambient temperature Ta(˚C) Forward voltage VF(V/seg) Ambient temperature Ta(˚C)
Forward current IF(mA/seg)
Forward current IF(mA/seg)
Relative luminous intensity(%)
Mold type
Mold type
Substrate type
Peak Forward Current Derating Curve Luminous Intensity vs. Forward Current Duty Ratio vs. Peak Forward Current
Ambient temperature Ta(˚C) Forward current IF(mA/seg) Duty ratio DR
Peak forward current IFM(mA/seg)
Relative luminous intensity(%)
Peak forward current IF(mA/seg)
Mold type
Substrate type
Forward Current Derating Curve Forward Current vs. Forward Voltage* Luminous Intensity vs. Ambient Temperature
Ambient temperature Ta(˚C) Forward voltage VF(V/seg) Ambient temperature Ta(˚C)
Forward current IF(mA/seg)
Forward current IF(mA/seg)
Relative luminous intensity(%)
Peak Forward Current Derating Curve Luminous Intensity vs. Forward Current Duty Ratio vs. Peak Forward Current
Ambient temperature Ta(˚C) Forward current IF(mA/seg) Duty ratio DR
Peak forward current IFM(mA/seg)
Relative luminous intensity(%)
Peak forward current IF(mA/seg)
180
Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Numeric LED Outline Dimensions(Unit:mm)
44.0
˚
7
21.0
17.0
14.0
37.0
51.0
3.9
(Segment width)
38.1
15.24
10-ø0.55
13.0
4.5
ø4.8 Segment name
B
C
E
FA
G
DD.P.
Luminous intensity rank
Internal connection diagram
814
17
2.54✕6=
S GL8U15
FEG
6
12
1
14
52
GL8
❏
15
CD
D.P.
EFG
D.P.
582
1412
16 89
9
GL9
❏
15
BA
ABCD
114114
Luminous intensity rank
11.2
27.9
14.7
˚
7
9.4
33.0
25.4
15.24
7.5
4.0 9.0
ø0.55
22.8 ø3.0
2.7(for all segment width)
2.54
✕
6=
MIN.
A
GC
D
D.P.
E
FB
814
71
S GL9E100
Internal connection diagram
FEG
6
12
1
14
52
GL8
❏
100
CD
D.P.
EFG
D.P.
582
1412
16 89
9
GL9
❏
100
BA
ABCD
1144 11
Segment name
Luminous intensity rank
11.2
27.9
14.7
˚
7
9.4
33.0
25.4
15.24
7.5
4.0 9.0
ø0.55
22.8 ø3.0
2.7(for all segment width)
2.54✕6=
MIN.
A
GC
D
D.P.
E
FB
814
71
S GL9ET100
Internal connection diagram
BDFGC
52E
11214
A
98
GL9❏❏100
(Red)
(Yellow-green)
11 4
D.P.
6BDFGC
52E
11214
A
98
GL8❏❏100
(Red)
(Yellow-gree
n
11 4
D.P.
6
Segment name
4
65
GL9❏15 Series GL8❏15 Series
GL9❏100 Series GL8❏100 Series GL9❏❏100 Series GL8❏❏100 Series
A B C D E F G D.P
7 6 4 2 1 9 10 5
38
GL9❏03M GL8❏03M
A B C D E F G D.P
7 6 4 2 1 9 10 5
38
0.9±0.2
11.0±0.6
10
-
R0.3±0.1
1.15±0.5
Reflector surface:Black print
Segment name
A
B
C
D
E
FG
D.P.
Internal connection
diagram
Recommended soldering pattern
0.2(Reference
dimensions)
Difference between
character center and
product center
7.0
10 6
12.7
8.0
1.3±0.2 5.2
Pin No.1 5
–0.2
+0.5
3.75
2.0✕0.6
5.2
1.3
12.4
10°
A B C D E F G D.P
7 6 4 2 1 9 10 5
38
GL9❏04M GL8❏04M
1.3±0.2
13.0±0.6
10-R0.5±0.1
1.3±0.5
Reflector surface:Black print
Segment name
A
B
C
D
E
FG
D.P.
Internal connection
diagram
A B C D E F G D.P
7 6 4 2 1 9 10 5
38
Recommended soldering pattern
9.4
10 6
10.16
15.0
1.8±0.2 7.2
Pin No.1 5
–0.2
+0.5
3.75
2.0✕1.0
7.2
1.8
14.4
10°
0.3(Reference
dimensions)
Difference between character
center and product center
A B C D E F G D.P
7 6 4 2 1 9 10 5
38
GL9❏56M GL8❏56M
A B C D E F G D.P
7 6 4 2 1 9 10 5
38
1.7
±
0.2
17.0±0.6
10-R0.7
±
0.1
1.5
±
0.5
A
B
C
D
E
FG
D.P.
12.5
10 6
14.22
19.0
2.45±0.2 9.8
Pin No.1 5
–0.2
+0.5
3.75
2.1✕1.4
9.8
2.45
18.1
10°
0.3(Reference
dimensions)
Difference between
character center and
product center
Segment name
Reflector surface:Black print
Internal connection
diagram
Recommended soldering pattern
1
3
2
GL9❏03M Series GL8❏03M Series GL9❏04M Series GL8❏04M Series
GL9❏56M Series GL8❏56M Series
181
Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Numeric LED
Numeric LED Outline Dimensions(Unit:mm)
4.0
0.5
7.0
1.0
2.54✕4=10.16
1.35
˚
0
1
1.0
ø1.2
4.89.6
3.2
10.16
6.5
4.58
13.0
5.6
0.3
Luminous intensity rank
1.35
7.62 0.25
(for all space)
(for all segment width)
D.P.
B
A
FG
EC
D
1
2
3
4
56
7
8
9
10
GL9S040
Internal connection diagram
Segment name & Pin No.
FEG
724385
GL8
❏
040
CD
D.P.
EFG
D.P.
895 3247 910
10
GL9
❏
040
BA
ABCD
611 6
Luminous intensity rank
4.5
5.0
1.0
0.5
˚
0
1
4.0
Internal connection diagram
3.5
7.0±0.3
8.0
11.0±0.4
5.3
ø0.9
2.2
0.25
2.0✕4=8.0
-0
+0.15
-0
+0.15
D.P.
1
2
3
4
5
9
8
7
6
10
A
D
EC
B
FG
GL9T030
1.0(for all segment width)
0.3(for all space)
Segment name & Pin No.
EFG
D.P.
810 5 3241
6
GL9
❏
030
ABCD
7 9
EFG
D.P.
810 5 3241
7
GL8
❏
030
ABCD
6 9
1.75
0.25
Dig.2
15.24
8.12
2-ø1.7
1.0
Luminous intensity rank
7.0
6.35
˚
8
6.35
1.5
25.0
11.2
6.41
Dig.1
20.32
2.54
4.0
17.0
0.5
1.25
14.12
0.3(Space)
1.3(Segment width)
Internal connection diagram
Segment name & Pin No.
2.54✕8=
D1
F1
E1
G1
A1B1
C1E2
F2B2
A2
G2
D2C2
18 10
9
1
S GL7D220
D
1
E
1
F
1
G
1
.
1516
3
18
12
17
4
GL7
❏
220
D.P
1
A
1
B
1
C
1
14
Dig.1
D
2
E
2
F
2
G
2
1011
8
12
567
9
D.P
2
A
2
B
2
C
2
13
Dig.2
D
1
E
1
F
1
G
1
.
1516
3
18
12
17
4
GL6
❏
220
D.P
1
A
1
B
1
C
1
14
Dig.1
D
2
E
2
F
2
G
2
1011
8
12
567
9
D.P
2
A
2
B
2
C
2
13
Dig.2
10
1211
GL9❏040 Series GL8❏040 Series
GL9❏030 Series GL8❏030 Series GL7❏220 Series GL6❏220 Series
9.26
22.86
˚
7
7.6
20.32
27.0
11.0
=10.16
4.0 8.0
7.0
10-ø0.45
1.8
(Segment width)
19.0
A
B
C
D
E
FG
D.P.
5
1
10
MIN.
Luminous intensity rank
ø2.0
6
2.54✕4
S GL8
❏
08
Internal connection diagram
FEG
5
9
1
10
42
GL8❏08
CD
D.P.
EFG
D.P.
462
10
915 67
7
GL9❏08
BA
ABCD
833 8
Segment name
Internal connection diagram
Segment name
9.26
22.86
˚
7
7.6
20.32
27.0
11.0
=10.16
4.0 8.0
7.0
10-ø0.45
1.8(Segment width)
19.0
A
B
C
D
E
FG
D.P.
51
10
MIN.
Luminous intensity rank
ø2.0
6
2.54✕4
S GL9ED08 G
R
42191076
GL9
❏❏
08
(Yellow-green)
3 (Red)8
(Yellow-green)
3 (Red)8
BDFGCEA
D.P.
542191076
GL8
❏❏
08
BDFGCEA
D.P.
5
15.24
˚
8
ø1.7
6.41
8.12
4.0
7.0
Luminous intensity rank
2.54✕4=10.16
0.25
12.2
4.85
17.0
14.12
0.5
54321
10
9678
D
E
FG
AB
C
D.P.
1.3(for all segment width)
(for all space)
0.3
9P156
Internal connection diagram
Segment name
FEG
5
9
1
10
42
GL8
❏
156
CD
D.P.
EFG
D.P.
462
10
91567
7
GL9
❏
156
BA
ABCD
833 8
87
9
GL9❏08 Series GL8❏08 Series GL9❏❏08 Series GL8❏❏08 Series
GL9❏156 Series GL8❏156 Series
182
Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Numeric LED Outline Dimensions(Unit:mm)
9.2
4.0
˚
0
1
3-ø0.9
3.5
2.5
4.5
7.0
5.0 5.0
0.5
2.54✕5=12.7
11
-ø
0.45
7.0
22.0
7.0
1.5
13.0
8.0
1.5
Internal connection diagram
A
9BCDE
GL3❏306
FGD.P.
713 8 6
10 11
5 Dig.3
B
C
E
F
G
D
A
D.P.
Dig.1 Dig.2 Dig.3
Segment name
16
711
2 Dig.1
4 Dig.2
A
9BCDE
GL3❏305
FGD.P.
713 8 6
10 11
5 Dig.3
2 Dig.1
4 Dig.2
0.3(for all space)
1.0(for all segment width)
S GL3E306
7.8
3.6
6.2
2.0
˚
0
1
6.0
21-ø0.45
1.5
0.5
6.5
5.0 6.5
5.5
30.0
2.54✕10=25.4
2.0
2.8
5-ø0.8
6.0
6.0
6.0
0.35
0.35
1.5
11.5
16 U.C.
2 Dig.1
4 Dig.2
7 Dig.3
9 Dig.4
6 L.C.
12 D.P.3
14 D.P.2
3 D.P.1
0.6(for all segment width)
0.3(for all space)
11
12
21
1
Internal connection diagram
5
Segment name
Dig.3Dig.4
Dig.2Dig.1 D.P.3
D.P.2
D.P.1 L.C.
U.C.
D
G
EC
FB
A
G
20
F
18
E
19
D
Gl3❏412
2110
CB
15
13
A
17
11
81
16 U.C.
2 Dig.1
4 Dig.2
7 Dig.3
9 Dig.4
6 L.C.
12 D.P.3
14 D.P.2
3 D.P.1
5
G
20
F
18
E
19
D
Gl3❏411
2110
CB
15
13
A
17
11
81
S GL3H412
1.5
9.2
4.0
˚
0
1
12-ø0.45
2.5
1.5
29.0
3.5
7.07.0
7.0
0.5
5.0 6.5
8.0
13.0
2.54✕7=17.78
1.0(Segment width) 0.3(Space)
S GL3P421
1
Dig.1
3
Dig.2
4
Dig.3
7
Dig.4
D.P.GFEDCBA 6910152111614
1
Dig.1
3
Dig.2
4
Dig.3
7
Dig.4
D.P.GFEDCBA GL3❏422 GL3❏421
6910152111614
Internal connection diagram
D.P.
G
D
E
F
C
B
A
P.16
P.1 P.7
P.9
Dig.4
Dig.3
Dig.2
Dig.1
Segment name & Pin No.
16
1817
GL3❏306 Series GL3❏305 Series
GL3❏412 Series GL3❏411 Series GL3❏422 Series GL3❏421 Series
0.25
1.0
4.0
7.0
5.08
2-ø1.6
1.0
15.24
˚
0
1
6.6
1.9
4.35.8 6.2
0.9
10.16
18.0±0.3
9.0
1.5
4.3
24.0±0.4
0.5
2.54✕8=20.32
Internal connection diagram
-0
+0.15
-0
+0.15
1.0(for all segment width)
0.3(for all space)
Luminous intensity rank
Segment name & Pin No.
F1
E1D1
B1B2
F2
G1
D2
C1G2
A1A2
Dig1 Dig2
D.P.2
D.P.1
E2C2
9
1
10
18
S GL7T201
D1E1F1G1
3
15
2
1718
1
GL7❏201
16
A1B1C1
14
D2E2F2G2
1011
8
12
567
4
D.P
19
D.P
2
A2B2C2
13
D1E1F1G1
1516
3
18
12
17
GL6❏201
A1B1C1
14
D2E2F2G2
1011
8
12
567
4
D.P
19
D.P
2
A2B2C2
13
0.5(Calking)
4.4
16-ø0.55
4.4
12.7
6.0 1.0
3.0 15.0
14.6
7.6
4.4
˚
0
1
16.8
17.0
4-ø4.0MAX.
3.0 2.0
14.3(Calking)
9
16
P20✕7=14.0
(Calking)
8
1
F2
E2
F1
E1B1
C1
A1A2
G1G2
D1D2C2
B2
Dig.1 Dig.2
0.75(Segment width)
0.3(Space)
Internal connection diagram
Segment name
D1E1F1
3
14
2
1316
18769
GL7P208U
B1
15
A1G1
C1
4
D2E2F2G2
1110 12
A2B2C2
5
Dig.1 Dig.2
1
1
5
0.25
7.62
˚
0
1
4
2.5
6
1
3
8
3
2
ø1
10
10.5
8
1
17.78
10
21
3
Luminous intensity rank
2.2
2-R1.1
12
1
5.5
0.5
6
2.54✕7=
GL7R202
Internal connection diagram
Segment name & Pin No.
A1B1
C1
D1
E1
F1D2E2
F2
A2
B2
C2G2
G1
4
23 5678
1
1514 13121110 9
16
Depth0.3
0.3(Space)
0.8
.(Segment width)
Dig2
Dig1
D
1
E
1
F
1
4
13
2
1615
112
10
98
GL7❏202
B
1
14
A
1
G
1
C
1
3
D
2
E
2
F
2
G
2
65 7
A
2
B
2
C
2
11
Dig.1 Dig.2
D
1
E
1
F
1
4
13
2
1615
112
10
98
GL6❏202
B
1
14
A
1
G
1
C
1
3
D
2
E
2
F
2
G
2
65 7
A
2
B
2
C
2
11
Dig.1 Dig.2
1413
15
GL7❏201 Series GL6❏201 Series GL7P208U Series▲
GL7❏202 Series GL6❏202 Series
The models marked with ▲may not be available in the near future. Contact Sharp sales personnel for details before use.
183
Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Numeric LED
Numeric LED Outline Dimensions(Unit:mm)
ø0.45 10.16
1.0
4.4
6-ø1.0
˚
0
1
4.04.0 4.06.2
1.0
30.0
4.0
1.3 13.5
3.81
4.6
1.0
7.0 5.0 14.0
8.4
6.0
2.0 1
10
11
20
0.3(for all space)
0.85(for all segment width)
GL3❏404
12
Dig.4
9
AIm
19
AM.PM
6
Dig.2
17
Dig.3
2
Dig.1
14 13 18 15
AB F
11 16
LC
UC Alm
7
DP
AMPM
1
20 8 4
CD
35
G
E
DP
10
12
Dig.4
9
AIm
19
AM.PM
6
Dig.2
17
Dig.3
2
Dig.1
14 13 18 15
AB F
11 16
LC
UC Alm
7
DP
AMPM
1
20 8 4
CD
35
G
E
DP
10
GL3❏403
2.54✕9=22.86
Internal connection diagram
S GL3P404 B
F
D
Dig.2 Dig.3 Dig.4
LC
UC G
A
EC
Dig.1
B
C
Alm
AM
PM DP
Segment name
0.3 for all space
12.58
ø0.45
3.4
5-ø0.9
4.0
10˚
7.07.0
Dig.5
15.0
7.6
13
7.0 0.5
1
7.0
Dig.4Dig.3Dig.2Dig.1
G
EFA
C
B
DD.P.
Dig.3
Dig.4
Dig.15
B
7
A
612
GEC
89
4
2
3
1
13
F
11
GL3❏507D
10
D
Dig.5
D.P.
Dig.2
42.5
6.01
6.01 1.0
2.54✕12=30.48
A
6
5
4
3
2
1
G
GL3❏508D
D.P.
Dig.5
Dig.4
Dig.3
Dig.2
Dig.1
FEDCB 131211
10
987
0.8(Segment width)
Internal connection diagram
2.42
1.0
5.0 6.5
0.5
Segment name
2019
GL3❏404 Series GL3❏403 Series GL3❏508D Series GL3❏507D Series
115
Application Circuits
NOTICE
●The circuit application examples in this publication are provided to explain representative applications of
SHARP devices and are not intended to guarantee any circuit design or license any intellectual property
rights. SHARP takes no responsibility for any problems related to any intellectual property right of a
third party resulting from the use of SHARP's devices.
●Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
SHARP reserves the right to make changes in the specifications, characteristics, data, materials,
structure, and other contents described herein at any time without notice in order to improve design or
reliability. Manufacturing locations are also subject to change without notice.
●Observe the following points when using any devices in this publication. SHARP takes no responsibility
for damage caused by improper use of the devices which does not meet the conditions and absolute
maximum ratings to be used specified in the relevant specification sheet nor meet the following
conditions:
(i) The devices in this publication are designed for use in general electronic equipment designs such as:
--- Personal computers
--- Office automation equipment
--- Telecommunication equipment [terminal]
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
(ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and
safety when SHARP devices are used for or in connection with equipment that requires higher
reliability such as:
--- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.)
--- Traffic signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
(iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely
high level of reliability and safety such as:
--- Space applications
--- Telecommunication equipment [trunk lines]
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g., scuba).
●Contact a SHARP representative in advance when intending to use SHARP devices for any "specific"
applications other than those recommended by SHARP or when it is unclear which category mentioned
above controls the intended use.
●If the SHARP devices listed in this publication fall within the scope of strategic products described in the
Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export
such SHARP devices.
●This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under
the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any
means, electronic or mechanical, for any purpose, in whole or in part, without the express written
permission of SHARP. Express written permission is also required before any use of this publication
may be made by a third party.
●Contact and consult with a SHARP representative if there are any questions about the contents of this
publication.