Packing Considerations (Methods, Materials and Recycling) Transport Media All NSC commercial devices are prepared, inspected and packed to insure proper physical support and protection during handling, transportation and shipment. Assembled devices are packed in one or more of the following container forms, a) immediate, b) intermediate, and c) outer or shipping containers. An example of each container form is illustrated below. INTERMEDIATE CONTAINER IMMEDIATE CONTAINER MS011809-4 MS011809-1 MS011809-5 MS011809-2 MS011809-6 OUTER/SHIPPING CONTAINER MS011809-3 MS011809-7 (c) 2001 National Semiconductor Corporation MS011809 www.national.com Packing Considerations January 2001 Packing Considerations Transport Media -- (Continued) Methods of immediate container packing include proper insertion of devices or components into plastic molded trays and rails/tubes, proper mounting of components onto tape and reel, or proper placement in corrugated cartons. The immediate containers are then packed into intermediate containers (plastic bags or corrugated boxes/cartons) with specified quantities of trays, rails/tubes or tape and reels. Outer/shipping containers are then fully or partial packed with intermediate boxes to meet order quantity requirements and to further insure protection from transportation hazards, additional dunnage filler material is required to fill voids inside the intermediate and outer/shipping containers. Impacts to the environment -- it shall be reusable and recyclable. Levels of Product Packing IMMEDIATE CONTAINER The first level of product packing is the immediate container. The type of immediate container used varies with the product or component being packed. In addition, the immediate container design and material depend on the fragility, size and profile of the product. There are four basic primary types of immediate containers used by NSC; plastic rails/tubes, plastic trays, tape and reel, and corrugated and chipboard boxes. A) Rails/tubes are basically made of acrylic or polyvinyl chloride (PVC) plastic. The electrical properties of the material are altered by either intrinsically adding carbon fillers, and/or topically coating with antistatic solution. Plastic rails/ tubes are non-bakeable. Refer to Table 1 for package types using rail/tube as primary container, and for information on material and recyclability. General Packing Requirements NSC packing methods and materials are designed based on the following considerations: -- Optimum protection to the products -- it must provide adequate protection from handling (electrostatic discharge) and transportation hazards; -- Ease of handling -- it should be easy to assemble, load and unload products in and from it; and TABLE 1. Plastic Rail/Tube and Stopper Requirements Rail Package Type Matrial Stopper Code/Symbol (Note 1) Type Material Code/Symbol (Note 1) Recyclability DIP's Plastic Polyvinylchloride 03/PVC Pin Polyamide (Nylon) 07/PA Yes Ceramic Polyvinylchloride 03/PVC Pin Polyamide (Nylon) 07/PA Yes Sidebraze Polyvinylchloride 03/PVC Pin Polyamide (Nylon) 07/PA Yes Cerpack Polyvinylchloride 03/PVC Pin Polyamide (Nylon) 07/PA Yes Flatpack Polyvinylchloride 03/PVC Pin Polyamide (Nylon) 07/PA Yes TO-220/263 Polyvinylchloride 03/PVC Pin Polyamide (Nylon) 07/PA Yes TapePak Polyvinylchloride 03/PVC Plug Krayton (Rubber) 07/SBR Yes PLCC Polyvinylchloride 03/PVC Plug Polyvinylchloride 03/PVC Yes SOP/SSOP/TSSOP Polyvinylchloride 03/PVC Plug Polyvinylchloride 03/PVC Yes Note 1: ISO 1043-1 International Standards -- Plastic Symbols. SAE J1344 Marking of Plastic Parts. ASTM D 1972-91 Standard Practice for Generic Marking of Plastic Products. DIN 6120, German Recycling Systems, RESY for paperbased and VGK for plastic packing materials. B) Plastic trays are categorized as injection molded and vacuum formed. Molded plastic trays are generally static dissipative and are mostly bakeable (125+ degrees C.). Vacuum formed are conductive and non-bakeable. Table 2 shows those package types with plastic trays as primary immediate containers, and also shows material and recyclability information. TABLE 2. Plastic Tray and Strap Material Requirements Tray Package Type PQFP/MQFP/ BGA/MQUAD CPGA & PPGA (higher leadcount) Strap Material Code/Symbol (Note 2) Polarylsulfone 07/PAS LCC/ Cerquad/ LDCC/ CPGA & PPGA (lower leadcount) www.national.com 2 Recyclability Material Code/Symbol (Note 2) Recyclability Yes Polypropylene Strap 05/PP Yes TABLE 3. Tape and Reel Requirements Reel Package Type SC70/SOT-23/ SOT-223/ Mini-SOP/ CSP Material Polystyrene Cover Tape Code/ Symbol (Note 2) Code/ Symbol (Note 2) Material 06/PS Polyester/ Polyethylene laminant 06/PS Carrier Tape Material Polystyrene Code/ Symbol (Note 2) 06/PS Recyclability (Note 2) Reel & Carrier Tape: Yes Cover Tape: No Note 2: 150 1043-1 International Standards -- Plastic Symbols. SAE J1344 Marking of Plastic Parts. ASTM D 1972-91 Standard Practice for Generic Marking of Plastic Products. DIN 6120, German Recycling Systems, RESY for paperbased and VGK for plastic packing materials. boards. Most corrugated boxes used as immediate containers are usually single wall construction. Refer to Table 4 for corrugated boxes material and recyclability information. D) Corrugated boxes/cartons are generally constructed with fibreboard facings and a fluted medium in between the facings. Chipboard containers comprised of just one fibreboard facing. Facings and fluted medium are kraft (brown) paper- TABLE 4. Corrugated Boxes/Cartons and Dunnage (Void Filler) Requirements Pack Method Package Type Material TO-46/18 Corrugated BOX (E070) TO-39/53, TO-5/72, TO-96/100, TO-202 (3L), TO-226/237, TO-92, TO-8 Corrugated Box (E070) All Packages All Packages Container Type Code/Symbol (Note 3) Primary Immediate (IMM) Intermediate (INT) Outer or Shipping (SHP) Resy INT Recyclability Yes Resy IMM Yes Corrugated Resy INT and SHP Yes Polyethylene 04/PE Dunnage (void filler) Yes Note 3: ISO 1043-1 International Standards -- Plastic Symbols. SAE J1344 Marking of Plastic Parts. ASTM D1972-91 Standard Practice for Generic Marking of Plastic Products. DIN 6120, German Recycling Systems, RESY for paperbased and VGK for plastic packing materials. transmission rate (mvtr). For corrugated cartons, see explanation in paragraph D) and Table 4 above. Refer to the following Table 5 for Conductive, Static Shielding and Moisture Barrier Bags Requirements. INTERMEDIATE CONTAINERS The second level of product packing is the intermediate container. Three types of intermediate containers are used. They are conductive or static shielding plastic bags, moisture barrier bag and corrugated cartons. Conductive bags are usually opaque and made of low-density polyethylene plastic material (LD PE). Static Shielding (S/S) bags are made of two laminated layers of static dissipative polyethylene sheets and a metalized film in between them. Moisture barrier bag (MBB) are used as intermediate container for moisture sensitive products. Its construction is similar to that of the S/S bag except with an extra layer of polyester (PET) sheet which altogether provide a very low moisture vapor 3 www.national.com Packing Considerations vice is held in place. The embossed carrier tape for the plastic reel is made of either polyvinylchloride (PVC) or polystyrene (PS) plastic material and intrinsically conductive. The laminated cover tape is made of polyester (PET) and polyethylene (PE) layers, and due to the laminated construction the cover tape is not considered recyclable. Refer to Table 3 for packages with tape & reel as primary immediate container, and corresponding material and recyclability information. Tape and reel is a multi-part immediate container system. The reel is made of polystyrene (PS) plastic material and topically coated with antistatic solution. Plastic reels are mostly used on surface mounts and larger packages. Smaller packages such as TO-92 use chipboard reels and usually are larger in diameter than the plastic reels. The tape inside the chipboard reel is paper based and consists of 2 layers with adhesive in between where the package or de- Packing Considerations TABLE 5. Conductive and Static Shielding Bag Requirements Package Type Container Type Material Code/Symbol Recyclability All products packed in rails Conductive Bag Low Density Polyethylene 04/PE-LD Yes TO-18/46 Static Shielding Bag Metalized Polyethylene N/A No Tapepak 40&84L, PLCC 32L & up, SOP/ TSOP/ TSSOP/ SSOP (higher leadcount) PQFP/ MQFP/ TQFP/ MQUAD/ PBGA, TO-220/263 (surface mount) Moisture Barrier Bag Polyethylene/ Aluminum/ Polyester Laminate N/A No Note 4: ISO 1043-1 International Standards -- Plastic Symbols. SAE J1344 Marking of Plastic Parts. ASTM D1972-91 Standard Practice for Generic Marking of Plastic Products. DIN 6120, German Recycling Systems, RESY for paperbased and VGK for plastic packing materials OUTER/SHIPPING CONTAINERS The third level of product packing is the outer/shipping carton. It is made of corrugated material consisting of inner and outer fibreboard facings and a fluted medium in between these facings. Most common shipping carton style is the regular slotted container (RSC) design. It can be single, double or tripe wall construction depending on the total weight of the products being transported or shipped. Refer to Table 4 for corrugated material and recyclability information. made of either metalized or laminated plastics such as the static shielding, moisture barrier bags and cover tape. Recycling can be accomplished in 2 ways, a) collection of preconsumer or post-consumer packing materials, regrinding and mixing into same plastic resins to manufacture new packing material; and b) collection of post-consumer or used packing material, reprocessing them (cleaning, mechanical/ dimensional/electrical inspections) for reuse. Recycling services of packing materials such as plastic molded trays, plastic reels and others are available through the following companies listed below. It is strongly recommended to contact these companies to obtain specific information regarding their recycling requirements and process, information on their representatives other than what is listed below or those outside of U.S.A. OTHER PACKING MATERIALS Additional dunnage and void filler materials are required to fill voids inside the intermediate and/or shipping containers. The use of dunnage is necessary when packing non full intermediate or shipping container quantities. This is to prevent unnecessary movement of products inside the partially filled container(s). Most common dunnage or void filler material used is the antistatic bubble sheet. It is made of low density polyethylene plastic sheet. Refer to Table 4 for material and recyclability information. Packing Material Recycling Information Majority of the product packing used at NSC are of recyclable materials. Those in the exception list are the ones Recycler 1) Packing Material The SemiCycle Fondation Plastic Molded (JEDEC) Trays, Plastic Reels 2111 Kramer Lane Austin, Texas 78758 Tel. No. (512) 339 - 4229 Fax. No. (512) 339 - 8121 Website: www.semicycle.org 2) Micro Plastics Inc. Plastic Molded (Jedec) Trays, Plastic Reels 3420 W Whitton Avenue Phoenix, Arizona 85017 Tel. No. (602)278-4545 Fax. No. (602)278-4477 www.national.com 4 3) Ecological Technologies, Inc. Packing Considerations Packing Material Recycling Information (Continued) Plastic Molded (Jedec) Trays 3281 Keller Street Santa Clara, CA. 95054 Tel. No. (408)988-2050 Fax. No. (408)988-4009 Website: www.eco-tech.com Immediate Container Pack Methods The following tables identify the primary and secondary or alternate, immediate pack methods offered by National Semiconductor. A secondary or alternate immediate container pack method is identified where applicable. Immediate pack method(s) for Metal Quad Flatpack (Mquad) Package Package Marketing Outline Drawing Primary Immediate Container Method Quantity ACC80A TRAY 66 ACE100A TRAY 66 AFA196A TRAY 21 AFB132A TRAY 36 ALE128A TRAY 66 AUL160A TRAY 24 AUW208A TRAY 24 AUY144A TRAY 24 AUZ120A TRAY 24 AWA240A TRAY 24 AYC304A TRAY 12 Secondary/Alternate Immediate Container Method Quantity Immediate pack method(s) for Ceramic Sidebrazed Dual-In-Line (SB) Package Package Marketing Outline Drawing Primary Immediate Container Method Quantity D08C RAIL/TUBE 35 D14D RAIL/TUBE 25 D16C RAIL/TUBE 20 D16D RAIL/TUBE 18 D18A RAIL/TUBE 20 D20A RAIL/TUBE 18 D20B RAIL/TUBE 18 D20CQ RAIL/TUBE 18 D22C RAIL/TUBE 17 D22D RAIL/TUBE 17 D24C RAIL/TUBE 15 D24CQ RAIL/TUBE 15 D24D RAIL/TUBE 15 D24I RAIL/TUBE 15 D24J RAIL/TUBE 15 D24K RAIL/TUBE 15 D24L RAIL/TUBE 15 D28C RAIL/TUBE 13 5 Secondary/Alternate Immediate Container Method Quantity www.national.com Packing Considerations Immediate pack method(s) for Ceramic Sidebrazed Dual-In-Line (SB) Package (Continued) Package Marketing Outline Drawing Primary Immediate Container Method Quantity D28D RAIL/TUBE 13 D28F RAIL/TUBE 13 D28G RAIL/TUBE 13 D28H RAIL/TUBE 13 D28JQ RAIL/TUBE 13 D40C RAIL/TUBE 9 D40J RAIL/TUBE 9 D40KQ RAIL/TUBE 9 D48A RAIL/TUBE 7 D52A RAIL/TUBE 7 Secondary/Alternate Immediate Container Method Quantity Immediate pack method(s) for Ceramic Leadless Chip Carrier (LCC) Package Package Marketing Outline Drawing Primary Immediate Container Method Quantity EA20B RAIL/TUBE 50 EA028C TRAY 100 EA48B TRAY 25 E20A RAIL/TUBE 50 E24B TRAY 25 E28A TRAY 25 E28B TRAY 25 E32A RAIL/TUBE 35 E32B RAIL/TUBE 35 E32C RAIL/TUBE 35 E40A RAIL/TUBE 35 E44A RAIL/TUBE 25 E48A TRAY 25 E68B TRAY 48 E68C TRAY 48 E84A TRAY 42 E84B TRAY 42 Secondary/Alternate Immediate Container Method Quantity Immediate pack method(s) for Ceramic Leaded Chip Carrier (LDCC) Package Package Marketing Outline Drawing Primary Immediate Container Method Quantity EL28A TRAY 96 EL44A TRAY 80 EL44B TRAY 80 EL44C TRAY 80 EL68A TRAY 44 EL68B TRAY 44 EL68C TRAY 44 EL84A TRAY 38 www.national.com 6 Secondary/Alternate Immediate Container Method Quantity Package Marketing Outline Drawing Primary Immediate Container Method Quantity EL132A TRAY 12 EL132B TRAY 12 EL132C TRAY 20 EL172B TRAY 12 EL172D TRAY 12 EL256A TRAY 12 E24B TRAY 25 E44A TRAY 25 E68B TRAY 48 E84B TRAY 42 Secondary/Alternate Immediate Container Method Quantity Immediate pack method(s) for Metal Can Package Package Marketing Outline Drawing Primary Immediate Container Secondary/Alternate Immediate Container Method Quantity Method G12B BOX 250 TRAY Quantity 20 H02A BULK 100 TRAY 50 H03A BULK 500 TRAY 100 H03B BULK 500 TRAY 100 H03C BOX 100 TRAY 100 H03E BOX 100 TRAY 100 H03G BULK 500 TRAY 100 H03H BULK 100 TRAY 50 H03J BOX 1800 TRAY 100 H04A BOX 500 TRAY 100 H04C BOX 100 TRAY 100 H04D BULK/BAG 1 H06C BOX 500 TRAY 100 H08A BOX 500 TRAY 100 H08B BOX 500 TRAY 100 H08C BOX 500 TRAY 100 H08D BOX 500 TRAY 100 H10C BOX 500 TRAY 100 H10D BOX 500 TRAY 100 H10E BOX 500 TRAY 100 H10F BOX 500 TRAY 100 H10G BOX 500 TRAY 100 KC02A TRAY 50 KC02B TRAY 50 KA04B TRAY 50 KA15A TRAY 50 K02A TRAY 50 K02B TRAY 50 K02C TRAY 50 K04A TRAY 50 K08A TRAY 50 7 www.national.com Packing Considerations Immediate pack method(s) for Ceramic Leaded Chip Carrier (LDCC) Package (Continued) Packing Considerations Immediate pack method(s) for Ceramic Quad Flatpack (CQFP) Package Package Marketing Outline Drawing Primary Immediate Container Method Quantity EL28B TRAY 30 EL64A TRAY 20 EL116A TRAY 12 EL128A TRAY 12 EL132E CARRIER/TRAY 12 EL132F TRAY 36 EL152A TRAY 12 EL164A TRAY 12 EL172C CARRIER/TRAY 12 EL172E TRAY 12 EL304A BOX 30 Secondary/Alternate Immediate Container Method Quantity Immediate pack method(s) for Ceramic Flatpack (CerPac) Package Package Marketing Outline Drawing Primary Immediate Container Method Quantity F14C CARRIER/RAIL 19 F16B CARRIER/RAIL 19 F16C CARRIER/RAIL 19 F18A CARRIER/RAIL 19 F18B CARRIER/RAIL 19 F20A CARRIER/RAIL 19 F24C CARRIER/RAIL 15 F24D CARRIER/RAIL 15 F28A CARRIER/RAIL 15 F28B CARRIER/RAIL 15 F28C TRAY 30 F30A CARRIER/RAIL 15 F40A CARRIER/RAIL 12 F132A TRAY 36 WA80A TRAY 84 WA80AQ TRAY 64 RAIL/TUBE 23 W10A CARRIER/RAIL 19 W14B CARRIER/RAIL 19 W14C CARRIER/RAIL 19 W20A CARRIER/RAIL 19 W24B CARRIER/RAIL 14 W24C CARRIER/RAIL 15 W24D CARRIER/RAIL 15 W28A CARRIER/RAIL 15 W28B CARRIER/RAIL 15 W28C CARRIER/RAIL 15 W144B TRAY 12 W160A TRAY 12 W208A TRAY 12 WG28A Secondary/Alternate Immediate Container Method Quantity Immediate pack method(s) for Ceramic Dual-In-Line (Cerdip) Package www.national.com 8 Package Marketing Outline Drawing Primary Immediate Container Method Quantity J08A RAIL/TUBE 40 J14A RAIL/TUBE 25 J16A RAIL/TUBE 25 J18A RAIL/TUBE 20 J20A RAIL/TUBE 20 J24A RAIL/TUBE 14 J24AQ RAIL/TUBE 14 J24E RAIL/TUBE 15 J24F RAIL/TUBE 15 J28A RAIL/TUBE 12 J28A-Q RAIL/TUBE 12 J32AQ RAIL/TUBE 11 J40A RAIL/TUBE 9 J40AQ RAIL/TUBE 9 J40BQ RAIL/TUBE 9 HY08A RAIL/TUBE 40 HY16A RAIL/TUBE 15 Secondary/Alternate Immediate Container Method Quantity Immediate pack method(s) for Ceramic Small Outline Package Package Marketing Outline Drawing Primary Immediate Container Method Quantity MC16A RAIL/TUBE 45 MC20A RAIL/TUBE 36 MC20B RAIL/TUBE 36 MC24A RAIL/TUBE 30 MC28A RAIL/TUBE 26 MC28B RAIL/TUBE 26 Secondary/Alternate Immediate Container Method Quantity Immediate pack method(s) for Molded Plastic SC-70 Package Package Marketing Outline Drawing Primary Immediate Container Secondary/Alternate Immediate Container Method Quantity Method Quantity MAA05A TAPE N REEL 3000 TAPE N REEL 250 MAA06A TAPE N REEL 3000 TAPE N REEL 250 Immediate pack method(s) for Molded Plastic SOT-23 Package Package Marketing Outline Drawing Primary Immediate Container Secondary/Alternate Immediate Container Method Quantity Method Quantity MF03A TAPE N REEL 3000 TAPE N REEL 1000 MF05A TAPE N REEL 3000 TAPE N REEL 1000 MF06A TAPE N REEL 3000 TAPE N REEL 1000 9 www.national.com Packing Considerations Immediate pack method(s) for Ceramic Dual-In-Line (Cerdip) Package (Continued) Packing Considerations Immediate pack method(s) for Molded Plastic SOT-223 Package Package Marketing Outline Drawing Primary Immediate Container Secondary/Alternate Immediate Container Method Quantity Method Quantity MP04A TAPE N REEL 2000 TAPE N REEL 1000 MP05A TAPE N REEL 1000 TAPE N REEL 2000 Immediate pack method(s) for Molded Plastic Small Outline (SOP) Package Package Marketing Outline Drawing Primary Immediate Container Method Quantity Method Quantity LA08A RAIL/TUBE 90 TAPE N REEL 2000 MA08D TAPE N REEL 3500 TAPE N REEL 250 MA28A RAIL/TUBE 25 TAPE N REEL 3500 TAPE N REEL 250 M08A RAIL/TUBE 95 TAPE N REEL 2500 M14A RAIL/TUBE 55 TAPE N REEL 2500 M14B RAIL/TUBE 50 TAPE N REEL 1000 M14D RAIL/TUBE 47 TAPE N REEL 2000 M16A RAIL/TUBE 48 TAPE N REEL 2500 M16B RAIL/TUBE 45 TAPE N REEL 1000 M16D RAIL/TUBE 47 TAPE N REEL 2000 MUA08A Secondary/Alternate Immediate Container M20B RAIL/TUBE 36 TAPE N REEL 1000 M20D RAIL/TUBE 38 TAPE N REEL 2000 M24B RAIL/TUBE 30 TAPE N REEL 1000 M24D RAIL/TUBE 32 TAPE N REEL 2000 M28B RAIL/TUBE 26 TAPE N REEL 1000 M40A RAIL/TUBE 30 Immediate pack method(s) for Molded Plastic Shrink Small Outline (SSOP) Package Package Marketing Outline Drawing Primary Immediate Container Method Quantity MEB36 RAIL/TUBE 30 MEB44 RAIL/TUBE 26 MEC34 RAIL/TUBE MQA16 RAIL/TUBE MQA20 RAIL/TUBE Secondary/Alternate Immediate Container Method Quantity 26 TAPE N REEL 1000 94 TAPE N REEL 2500 54 TAPE N REEL 2500 MQA24 RAIL/TUBE 54 TAPE N REEL 2500 MSA20 RAIL/TUBE 66 TAPE N REEL 2000 MSA24 RAIL/TUBE 58 TAPE N REEL 2000 TAPE N REEL 2000 MSA28 RAIL/TUBE 47 MSC14 TAPE N REEL 2000 MSC16 TAPE N REEL 2000 MSC20 TAPE N REEL 2000 MS40A RAIL/TUBE 34 TAPE N REEL 1000 MS48A RAIL/TUBE 29 TAPE N REEL 1000 MS56A RAIL/TUBE 25 TAPE N REEL 1000 www.national.com 10 Package Marketing Outline Drawing Primary Immediate Container Secondary/Alternate Immediate Container Method Quantity Method Quantity MTA20 TRAY 150 TAPE N REEL 2500 MTC08 RAIL/TUBE 100 TAPE N REEL 2500 MTC14 RAIL/TUBE 94 TAPE N REEL 2500 MTC16 RAIL/TUBE 94 TAPE N REEL 2500 MTC20 RAIL/TUBE 73 TAPE N REEL 2500 MTC24 RAIL/TUBE 61 TAPE N REEL 2500 MTC28 RAIL/TUBE 48 TAPE N REEL 2500 MTD48 RAIL/TUBE 38 TAPE N REEL 1000 MTD56 RAIL/TUBE 34 TAPE N REEL 1000 MTD64 RAIL/TUBE 28 TAPE N REEL 1000 MTE28 RAIL/TUBE 49 MXA20A RAIL/TUBE 73 TAPE N REEL 2500 MXA28A RAIL/TUBE 48 TAPE N REEL 2500 Immediate pack method(s) for Molded Plastic Thin Small Outline (TSOP) Package Package Marketing Outline Drawing Primary Immediate Container Method Quantity MBH32A TRAY 156 MDA44 TRAY 135 MDB44 TRAY 135 Secondary/Alternate Immediate Container Method Quantity TAPE N REEL 1000 Immediate pack method(s) for Plastic Molded Dual-In-Line (Mdip) Package Package Marketing Outline Drawing Primary Immediate Container Method Quantity NA24F RAIL/TUBE 12 NA24G RAIL/TUBE 15 NA28F RAIL/TUBE 13 NA32A RAIL/TUBE 11 NA40A RAIL/TUBE 9 N08D RAIL/TUBE 40 N08E RAIL/TUBE 40 N10A RAIL/TUBE 30 N14A RAIL/TUBE 25 N14B RAIL/TUBE 25 N16A RAIL/TUBE 20 N16E RAIL/TUBE 25 N16F RAIL/TUBE 20 N16G RAIL/TUBE 20 N18A RAIL/TUBE 20 N20A RAIL/TUBE 18 N20B RAIL/TUBE 18 N22A RAIL/TUBE 15 N22B RAIL/TUBE 15 N24A RAIL/TUBE 15 11 Secondary/Alternate Immediate Container Method Quantity www.national.com Packing Considerations Immediate pack method(s) for Molded PlasticThin Shrink Small Outline (TSSOP) Package Packing Considerations Immediate pack method(s) for Plastic Molded Dual-In-Line (Mdip) Package (Continued) Package Marketing Outline Drawing Primary Immediate Container Method Quantity N24A-Q RAIL/TUBE 15 N24C RAIL/TUBE 15 N24D RAIL/TUBE 15 N24E RAIL/TUBE 15 N28B RAIL/TUBE 13 N28C RAIL/TUBE 13 N40A RAIL/TUBE 9 N48A RAIL/TUBE 7 Secondary/Alternate Immediate Container Method Quantity Immediate pack method(s) for Plastic Molded TO-202 Package Package Marketing Outline Drawing Primary Immediate Container Method Quantity P03A BULK 300 P03B BULK 300 P03C BULK 300 P03D BULK 300 P03E BULK 300 P03F BULK 300 P03G BULK 300 P03H BULK 300 P03J BULK 300 P03K BOX 300 P04A RAIL 45 P11A RAIL 16 Secondary/Alternate Immediate Container Method Quantity BULK 300 Immediate pack method(s) for Plastic Molded TO-226/237 Package Package Marketing Outline Drawing Primary Immediate Container Method Quantity RC03A BOX 1500 RC03B BOX 1500 RC03C BOX 1500 R03A BOX 1800 R03B BOX 1800 R03C BOX 1800 R03D BOX 1800 Secondary/Alternate Immediate Container Method Quantity Immediate pack method(s) for Laminate Plastic Chip Scale (CSP) Package Package Marketing Outline Drawing Primary Immediate Container Method Quantity SLB16A TAPE N REEL 2500 SLB20A TAPE N REEL 2500 SLB24A TAPE N REEL 2500 Secondary/Alternate Immediate Container Method Quantity Immediate pack method(s) for Wafer Level Chip Scale (CSP) Package www.national.com 12 Package Marketing Outline Drawing SWA08A Primary Immediate Container Secondary/Alternate Immediate Container Method Quantity Method Quantity TAPE N REEL 3000 TAPE N REEL 250 Immediate pack method(s) for Plastic Molded TO-220/263 Package Package Marketing Outline Drawing Primary Immediate Container Method Quantity TA02A RAIL/TUBE 45 TA03A RAIL/TUBE 45 TA03F RAIL/TUBE 45 TA03D RAIL/TUBE TA03G RAIL/TUBE TA03H RAIL/TUBE 45 TA05A RAIL/TUBE 45 TA05B RAIL/TUBE 45 TA05D RAIL/TUBE 45 TA07A RAIL/TUBE 45 TA07B RAIL/TUBE 45 TA07D RAIL/TUBE 45 TA11A RAIL/TUBE 20 TA11B RAIL/TUBE 20 TA11C RAIL/TUBE 20 TA11D RAIL/TUBE 20 TA11E RAIL/TUBE 23 TA12A RAIL/TUBE 13 TA15A RAIL/TUBE 20 TA15B RAIL/TUBE 20 TA15C RAIL/TUBE 20 TA15D RAIL/TUBE 23 TA23A RAIL/TUBE 15 TA9A RAIL/TUBE 45 TD03B RAIL/TUBE 75 TF11A RAIL/TUBE 20 TF11B RAIL/TUBE 20 TF15A RAIL/TUBE 20 TF15B RAIL/TUBE 20 TS11A RAIL/TUBE 22 TS11B RAIL/TUBE TS15B RAIL/TUBE TS3A RAIL/TUBE 45 TS3B RAIL/TUBE 45 TS5A RAIL/TUBE 45 TS5B RAIL/TUBE TS7A RAIL/TUBE TS7B TS9A Secondary/Alternate Immediate Container Method Quantity 45 TAPE N REEL 500 45 TAPE N REEL 500 TAPE N REEL 500 TAPE N REEL 500 TAPE N REEL 500 22 TAPE N REEL 500 22 TAPE N REEL 500 TAPE N REEL 500 45 TAPE N REEL 500 45 TAPE N REEL 500 RAIL/TUBE 45 TAPE N REEL 500 RAIL/TUBE 45 TAPE N REEL 500 T03A RAIL/TUBE 45 T03B RAIL/TUBE 45 13 www.national.com Packing Considerations Immediate pack method(s) for Wafer Level Chip Scale (CSP) Package (Continued) Packing Considerations Immediate pack method(s) for Plastic Molded TO-220/263 Package Package Marketing Outline Drawing Primary Immediate Container Method Quantity T03D RAIL/TUBE 45 T03F RAIL/TUBE 45 T05A RAIL/TUBE 45 T05B RAIL/TUBE 45 T05D RAIL/TUBE 45 T05E RAIL/TUBE 45 T05F RAIL/TUBE 45 (Continued) Secondary/Alternate Immediate Container Method Quantity TAPE N REEL 500 Immediate pack method(s) for Plastic Molded Tapepak (TP)Package Package Marketing Outline Drawing Primary Immediate Container Method Quantity Secondary/Alternate Immediate Container Method Quantity TP40A RAIL/TUBE 25 RAIL/TUBE 100 TP84A RAIL/TUBE 12 RAIL/TUBE 100 Immediate pack method(s) for Plastic Molded Pin Grid Array (PPGA) Package Package Marketing Outline Drawing Primary Immediate Container Method Quantity UP68A TRAY 42 UP68B TRAY 42 UP84A TRAY 35 UP84B TRAY 35 UP124A TRAY 30 UP144A TRAY 20 UP175A TRAY 20 UP302A TRAY 20 Secondary/Alternate Immediate Container Method Quantity Immediate pack method(s) for Ceramic Pin Grid Array (CPGA) Package Package Marketing Outline Drawing Primary Immediate Container Method Quantity UA65A TRAY 42 UA101A TRAY 20 UA225A TRAY 12 UA296A TRAY 10 UA302A TRAY 12 UA319A TRAY 12 UA320A TRAY 10 U109A TRAY 25 U120B TRAY 25 U120C TRAY 30 U121A TRAY 30 U124A TRAY 30 U124C TRAY 30 U132A TRAY 30 U132B TRAY 30 www.national.com 14 Secondary/Alternate Immediate Container Method Quantity Package Marketing Outline Drawing Primary Immediate Container Method Quantity U143A TRAY 20 U143B TRAY 20 U144A TRAY 20 U149A TRAY 20 U156A TRAY 20 U156B TRAY 20 U169A TRAY 12 U169B TRAY 12 U172A TRAY 20 U172B TRAY 20 U173A TRAY 20 U175A TRAY 20 U180A TRAY 20 U223A TRAY 20 U224A TRAY 20 U257A TRAY 12 U259A TRAY 12 U299A TRAY 12 U301A TRAY 12 U303A TRAY 12 U323A TRAY 12 U44A TRAY 80 U68A TRAY 42 U68B TRAY 42 U68C TRAY 42 U68D TRAY 42 U68E TRAY 42 U68F TRAY 42 U68G TRAY 42 U75A TRAY 35 U84A TRAY 42 U84B TRAY 42 U84C TRAY 25 U84D TRAY 25 U84E TRAY 35 U99A TRAY 25 Secondary/Alternate Immediate Container Method Quantity Immediate pack method(s) for Plastic Molded Ball Grid Array (PBGA) Package Package Marketing Outline Drawing Primary Immediate Container Method Quantity UBA169A TRAY 60 UBA225A TRAY 40 UBA225B TRAY 40 UBD316A TRAY 40 UCA313 TRAY 24 15 Secondary/Alternate Immediate Container Method Quantity www.national.com Packing Considerations Immediate pack method(s) for Ceramic Pin Grid Array (CPGA) Package (Continued) Packing Considerations Immediate pack method(s) for Plastic Molded Ball Grid Array (PBGA) Package (Continued) Package Marketing Outline Drawing Primary Immediate Container Method Quantity UCA313A TRAY 24 UCB388A TRAY 24 UCC352A TRAY 24 UCH352B TRAY 24 UDB168A TRAY 60 UDC208A TRAY 60 Secondary/Alternate Immediate Container Method Quantity Immediate pack method(s) for Plastic Molded Quad Flatpack (PQFP/MQFP/TQFP) Package Package Marketing Outline Drawing Primary Immediate Container Secondary/Alternate Immediate Container Method Quantity Method Quantity VBE32A TRAY 250 TAPE N REEL 1000 VBG48A TRAY 250 VBH48A TRAY 250 TAPE N REEL 1000 VCC80A TRAY 66 VCE100A TRAY 66 VCG100A TRAY 66 VEF44A TRAY 96 VEG52A TRAY 160 TAPE N REEL 1000 VEH64A TRAY 160 TAPE N REEL 1000 VEJ44A TRAY 160 TAPE N REEL 1000 VEV64A TRAY 160 TAPE N REEL 1000 VF132A TRAY 36 VF196A TRAY 21 VGB52A TRAY 96 VGZ44A TRAY 96 TAPE N REEL 1000 VHB80A TRAY 119 VHG80A TRAY 119 TAPE N REEL 1000 VJC44A TRAY 84 VJD100A TRAY 90 VJE80A TRAY 84 VJG100A TRAY 90 VJH80A TRAY 90 VJK64A TRAY 90 VJL52A TRAY 84 VJM52A TRAY 84 VJP44A TRAY 84 VJQ64A TRAY 84 VJU100A TRAY 84 VJY128A TRAY 90 VJZ60A TRAY 84 TAPE N REEL 500 VLA128A TRAY 66 VLC80B TRAY 66 VLG80A TRAY 66 VLJ100A TRAY 66 VLK100A TRAY 66 www.national.com 16 Package Marketing Outline Drawing Primary Immediate Container Method Quantity VLW128A TRAY 66 VNG144A TRAY 60 VPC176A TRAY 40 VQB120A TRAY 24 VQB160A TRAY 24 VQD120A TRAY 24 VQG160A TRAY 24 VQK208A TRAY 24 VQL160A TRAY 24 VQY144A TRAY 24 VQZ120A TRAY 24 VUF208A TRAY 24 VUH208A TRAY 36 VUL160A TRAY 24 VUM208A TRAY 24 VUW208A TRAY 24 VUY144A TRAY 24 VUZ120A TRAY 24 VYC304A TRAY 12 Secondary/Alternate Immediate Container Method Quantity Immediate pack method(s) for Plastic Molded Leaded Chip Carrier (PLCC)Package Package Marketing Outline Drawing Primary Immediate Container Secondary/Alternate Immediate Container Method Quantity Method Quantity V20A RAIL 40 TAPE N REEL 1000 V28A RAIL 35 TAPE N REEL 750 V32A RAIL 30 TAPE N REEL 750 V44A RAIL 25 TAPE N REEL 500 V52A RAIL 22 TAPE N REEL 500 V68A RAIL 18 TAPE N REEL 250 V84A RAIL 15 TAPE N REEL 250 Immediate pack method(s) for Plastic Molded TO-92 Package Package Marketing Outline Drawing Primary Immediate Container Secondary/Alternate Immediate Container Method Quantity Method Quantity Z03A BOX 1800 TAPE N REEL 2000 Z03B BOX 1800 TAPE N REEL 2000 Z03C BOX 1800 TAPE N REEL 2000 Z03D BOX 1500 TAPE N REEL 2000 Z03E BOX 1800 TAPE N REEL 2000 Z03G BOX 1800 TAPE N REEL 2000 Z03J BOX 1800 TAPE N REEL 2000 17 www.national.com Packing Considerations Immediate pack method(s) for Plastic Molded Quad Flatpack (PQFP/MQFP/TQFP) Package (Continued) Packing Considerations Labeling intermediate container labels are National's own format while the outer/shipping container label is based on the ElA-556-A label standard. National Semiconductor offers 3 standard bar code labels; reel and intermediate container labels for Tape and Reel; intermediate container label other than for Tape and Reel; and outer/shipping container labels. The tape and reel, and NSC Standard Tape and Reel Label MS011809-8 This label is placed on the reel (immediate container) as well as on the intermediate box. NSC Standard Intermediate Container Label MS011809-9 www.national.com 18 Packing Considerations Labeling (Continued) NSC Standard Outer/Shipping Container Label MS011809-10 LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com www.national.com National Semiconductor Europe Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Francais Tel: +33 (0) 1 41 91 8790 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: ap.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5639-7560 Fax: 81-3-5639-7507 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.