To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, afliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Afrmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
November 1992
Revised April 1999
74VHC139 Dual 2-to-4 Decoder/Demultiplexer
© 1999 Fairchild Semiconductor Corporation DS011521.prf www.fairchildsemi.com
74VHC139
Dual 2-to-4 Deco der/Demultiplexer
General Descript ion
The VHC13 9 i s a n a dva nced hig h sp eed C MO S D ua l 2-t o-
4 Decoder/Demultiplexer fabricated with silicon gate
CMOS technology. It achieves the high speed operation
similar to equivalent Bipolar Schottky TTL while maintain-
ing the CMOS low power dissipation.
The active LOW enable input can be used for gating or it
can be used as a data input for demultiplexing applications.
When the enable input is held HIGH, all four outputs are
fixed at a HIGH lo gic le vel independent of t he other inpu ts.
An input protection circuit ensures that 0V to 7V can be
applied to the input pins without regard to the supp ly vo lt-
age. This device can be used to interface 5V to 3V systems
and two sup ply systems such as battery ba ck up. This cir-
cuit pr eve nts dev ic e d estr uct ion due to m i sma tche d s upp l y
and input voltages.
Features
High Speed: tPD = 5.0 ns (typ) at TA = 25°C
Low power dissipation: ICC = 4 µA (Max.) at TA = 25°C
High noise immunity: VNIH = VNIL = 28% VCC (Min.)
Power down protection is provided on all inputs
Pin and function compatible with 74HC139
Ordering Code:
Surface m ount pack ages are also available on Tape and Reel. Specify by ap pending the s uffix let te r “X” to the ordering code .
Connection Diagram Pin Descripti on
Truth Table
H = HIGH Voltage Level
L = LOW Voltage Level
X = Immaterial
Order Number Package Number Package Description
74VHC139M M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow
74VHC139SJ M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
74VHC139MTC MTC16 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
74VHC139N N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide
Pin Names Description
A0, A1Address Inpu ts
EEnable Inputs
O0–O3Outputs
Inputs Outputs
EA0A1O0O1O2O3
HXXHHHH
LLLLHHH
LHLHLHH
LLHHHLH
LHHHHHL
www.fairchildsemi.com 2
74VHC139
Logic Symbols
IEEE/IEC
Functional Description
The VHC 139 is a high-spe ed dual 2-to-4 de coder/demulti -
plexer. The device has two inde pende nt decode rs, each of
which accepts two binary weighted inputs (A0–A1) and pro-
vides four mutually exclusive active-LOW outputs (O0–O3).
Each decoder has an active-LOW enable (E). When E is
HIGH all outputs are forced HIGH. The enable can be used
as the data input for a 4-output demultiplexer application.
Each half of the VHC139 generates all four minterms of
two variables. These four minterms are useful in some
applicat ions, repl acing multi ple gate functions as shown in
Figure 1
, and thereby reducing the number of packages
required in a logic network.
FIGURE 1. Gate Functions (Each Half)
Logic Diagram
Pleas e note that this diagram is provided only f or t he understanding of lo gic operations and should no t be us ed to estimate propaga tio n delays.
3 www.fairchildsemi.com
74VHC139
Absolute Maximum Ratings(Note 1) Recommended Operating
Conditions (Note 2)
Note 1: Absolute Maximum Ratings are values beyond which the device
may be da maged or ha ve its useful life impaire d. The datab ook specific a-
tions should be met, without exceptio n, to ensure that the system design is
reliable over its pow er supply, tem perature, and output/inpu t loading vari-
ables. Fairchild does not recommend operation outside databook specifica-
tions.
Note 2: Unused inputs must be held HIGH o r LOW. They ma y not float.
DC Electrical Characteristics
AC Electrical Characteristics
Note 3: CPD is defined as the va lue of the internal equiv alent capac it ance which is c alc ulated from t he operati ng c urrent consumption w it ho ut load. Average
operati ng c urrent can be obtaine d by t he equation: ICC (opr.) = CPD * VCC * fIN + ICC/2 (per deco der).
Supply Voltage (VCC)0.5 V to +7.0V
DC Input Voltage (VIN)0.5V to +7.0V
DC Output Voltage (VOUT)0.5V to VCC + 0.5V
Input Diode Curr ent (IIK)20 mA
Output Diode Current (IOK)±20 mA
DC Output Current (IOUT)±25 mA
DC VCC/GND Current (ICC)±75 mA
Storage Temperature (TSTG)65°C to +150°C
Lead Temperature (TL)
(Soldering, 10 seconds) 260°C
Supply Voltage (VCC)2.0V to +5.5V
Input Voltage (VIN)0V to +5.5V
Output Voltage (VOUT)0V to V
CC
Operating Temperature (TOPR)40°C to +85°C
Input Rise and Fall Time (tr, tf)
VCC = 3.3V ± 0.3V 0 100 ns/V
VCC = 5.0V ± 0.5V 0 20 ns/V
Symbol Parameter VCC
(V)
TA = 25°CT
A = 40°C to +85°CUnits Conditions
Min Typ Max Min Max
VIH HIGH Level 2.0 1.50 1.50 V
Input Voltage 3.0 5.5 0.7 VCC 0.7 VCC
VIL LOW Level 2.0 0.50 0.50 V
Input Voltage 3.0 5.5 0.3 VCC 0.3 VCC
VOH HIGH Level 2.0 1.9 2.0 1.9 VIN = VIH IOH = 50 µA
Output Vo ltage 3.0 2.9 3.0 2.9 V or VIL
4.5 4.4 4.5 4.4
3.0 2.58 2.48 VIOH = 4 mA
4.5 3.94 3.80 IOH = 8 mA
VOL LOW Level 2.0 0.0 0.1 0.1 VIN = VIH IOL = 50 µA
Output Vo ltage 3.0 0.0 0.1 0.1 V or VIL
4.5 0.0 0.1 0.1
3.0 0.36 0.44 VIOL = 4 mA
4.5 0.36 0.44 IOL = 8 mA
IIN Input Leakage Current 0 5.5 ±0.1 ±1.0 µAV
IN = 5.5V or GND
ICC Quiescent Supply Current 5.5 4.0 40.0 µAV
IN = VCC or GND
Symbol Parameter VCC
(V)
TA = 25°CT
A = 40°C to +85°CUnits Conditions
Min Typ Max Min Max
tPLH Propagation Delay 3.3 ± 0.3 7.2 11.0 1.0 13.0 ns CL = 15 pF
tPHL Anto On9.7 14.5 1.0 16.5 CL = 50 pF
5.0 ± 0.5 5.0 7.2 1.0 8.5 ns CL = 15 pF
6.5 9.2 1.0 10.5 CL = 50 pF
tPLH Propagation Delay 3.3 ± 0.3 6.4 9.2 1.0 11.0 ns CL = 15 pF
tPHL Ento On8.9 12.7 1.0 14.5 CL = 50 pF
5.0 ± 0.5 4.4 6.3 1.0 7.5 ns CL = 15 pF
5.98.31.09.5 C
L = 50 pF
CIN Input Capacitance 4 10 10 pF VCC = Open
CPD Power Dissipation Capacitance 26 pF (Note 3)
www.fairchildsemi.com 4
74VHC139
Physical Dimensions inches (millimeters) unless otherwise noted
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow
Package Number M16A
16-Lead Sma ll Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M16D
5 www.fairchildsemi.com
74VHC139
Physical Dim ensions inches (millimeters) unless otherwise noted (Continued)
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Packag e Num be r MTC 16
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.
74VHC139 Dual 2-to-4 Decoder/Demultiplexer
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life suppor t de vices o r systems a re devices or syste ms
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be rea-
sonably expected to result in a significant injury to the
user.
2. A critical compon ent i n any compon ent of a life su pport
device or system whose failu re to perform can be rea-
sonabl y ex pect ed to ca use the fa i lure of the life su pp ort
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide
Package Number N16E
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/PatentMarking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81358171050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC