APEM www.apem.com A-101
A
3600NF series
Sealed toggle switches for outdoor applications
Distinctive features and specifications
❑Sealing to IP67 obtained by :
- O-ring between lever and bushing
- half-length boot and nylon washer (supplied mounted)
- elastomer gasket between cover and case
- molded-in terminal inserts
- sealing washer U60
❑Solid silver contacts
❑UL approved
MATERIALS
• Case : phenolic resin
• Actuator : brass, nickel plated
• Bushing : brass, nickel plated
• Contacts : solid silver
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
12A 28VDC
• Initial contact resistance : 10 mΩmax.
• Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength :
2.500 Vrms 50 Hz min. between terminals
3.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 10.000 cycles at full load
GENERAL SPECIFICATIONS
• Sealing to IP67 according to IEC 60529
• Torque : 1,50 Nm (1.10 Ft.lb) max. applied to nut
• Panel thickness : 2 mm (.079) max. with all accessories
• Operating temperature : -40°C to +85°C
AGENCY APPROVAL
6A 125VAC/250VAC
Availability : consult factory for
details or approved models.
Marking : to order switches
marked UL, complete last box of
ordering format.
Dimensions : first dimensions are in mm while inches are shown as bracketed numbers.
ABOUT THIS SERIES
Mounting accessories : 1 sealing boot U1151, 1 hex nut U166, 1 nylon washer U21 and 1 sealing washer U60. See section I.
Packaging unit : 25 pieces per type and colour.
The company reserves the right to change specifications without notice.
16-Serie 3600NF-A_19-Serie 3600NF-A 30/10/14 15:24 Page101