CY3271-EXP1 ENVIRONMENTAL SENSING KIT QUICK START GUIDE The Environmental Sensing Kit requires the CY3271 Kit for operation. This quick start guide assumes you are familiar with the CY3271, its operation, and programming of PSoC devices. If not, refer to the users guide on the CD. 1 2 Install all software in the CY3271 kit. Program the RF Expansion board with RF_I2C_Bridge.hex from the CD. 3 4 A B C D Connect the battery board, RF Expansion board, and the Weather Station board. Launch Sense and Control Dashboard and `bind' the RF Expansion board. 5 6 Click 'Load Node configuration from a file' and select Weather_Station_Dashboard_ Configuration.xml from the CD. Monitor, chart, and record data from all sensors. See the user guide for other CY3271 projects. CY3271-EXP1 ENVIRONMENTAL SENSING KIT QUICK START GUIDE Weather Station Expansion Board Ambient Light Sensor Atmospheric Pressure Sensor Thermistor Pigtail Thermistor Expansion Board Humidity Sensor Application PSoC Device (on reversie side) Pigtail Thermistor CY3271 Hardware (Required for Operation) PC Dongle RF Expansion Board General Purpose Push Button Thermistor 20 dBm RF Programming PSoC Programming and Interface Connector Application PSoC AAA Battery Pack +20 dBm RF Push Buttons and LEDs Programming and Interface Connecto On/Off Switch Target Board Jumper Expansion Connector Application PSoC Device (on reverse side) Expansion Connector For the latest information about this kit, visit www.cypress.com/go/CY3271-EXP1 (c) 2008-2011 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered trademarks referenced herein are the properties of their respective owners. DOC#: 001-49260 REV. *A Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cypress Semiconductor: CY3271-EXP1 CY3271