5.0SMDJ51CA-H - BOURNS - Product.Live

Features

n RoHS compliant* and halogen free**

n Surface mount SMC package

n Standoff voltage: 5 to 170 volts

n Peak Pulse Power: 5000 watts

n Typical temperature coefﬁcient:

DVBR = 0.1 % x VBR @ 25 °C x DT

Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)

5.0SMDJ Transient Voltage Suppressor Diode Series

Parameter Symbol Value Unit

Minimum Peak Pulse Power Dissipation (Tp = 1 ms) (Note 1,2) PPK 5000 Watts

Peak Forward Surge Current

8.3 ms Single Half Sine Wave Superimposed on Rated Load

(JEDEC Method) (Note 3,4)

IFSM 300 Amps

Steady State Power Dissipation @ TL = 50 °C PM(AV) 6.5 Watts

Maximum Instantaneous Forward Voltage @ IPP = 100 A

(For Unidirectional Units Only) VF5 Volts

Operating Temperature Range TJ-55 to +150 °C

Storage Temperature Range TSTG -55 to +150 °C

1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve.

2. Thermal Resistance Junction to Lead.

3. 8.3 ms Single Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).

4. Mounted on 8.0 mm x 8.0 mm copper pad area to each terminal.

General Information Agency Recognition

Portable communications, computing and video equipment manufacturers are challenging

the semiconductor industry to develop increasingly higher power density circuit protection

components.

Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection

applications, in compact chip package DO-214AB (SMC) size format. The Transient Voltage

Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 170 V

and Breakdown Voltage up to 209 V. Typical fast response times are less than 1.0 ps from 0

V to Breakdown Voltage.

Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick

and place equipment and the at conguration minimizes roll away.

How to Order

5.0SMDJ 12 CA - H

Package

5.0SMDJ = SMC/DO-214AB

Working Peak Reverse Voltage

12 = 12 VRWM (Volts)

Sufx

A = 5 % Tolerance Unidirectional Device

CA = 5 % Tolerance Bidirectional Device

Reel

(Blank) = 13-inch Reel

-H = 7-inch Reel

Asia-Pacic:

Tel: +886-2 2562-4117 • Email: asiacus@bourns.com

Europe:

Tel: +36 88 885 877 • Email: eurocus@bourns.com

The Americas:

Tel: +1-951 781-5500 • Email: americus@bourns.com

www.bourns.com

Description

UL File Number: E153537

*RoHS Directive 2015/863, Mar 31, 2015 and Annex.

Speciﬁcations are subject to change without notice.

Users should verify actual device performance in their speciﬁc applications.

The products described herein and this document are subject to speciﬁc legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

5.0SMDJ Transient Voltage Suppressor Diode Series

Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)

Unidirectional Device Bidirectional Device Breakdown Voltage

VBR (Volts)

Reverse

Standoff

Voltage

Maximum

Reverse

Leakage

@ VRWM

Maximum

Clamping

Voltage

@ Ipp

(10/1000 µs)

Maximum

Peak

Pulse

Current

(10/1000 µs)

Maximum

Clamping

Voltage

@ Ipp

(8/20 µs)

Maximum

Peak

Pulse

Current

(8/20 µs)

Part

Number

Part

Marking

Part

Number

Part

Marking Min. Max. @ IT

(mA)

VRWM

(V)

(μA)

(V)

Ipp

(A)

(V)

Ipp

(A)

5.0SMDJ5.0A 5RDE 5.0SMDJ5.0CA 5DDE 6.40 7.00 10 5.0 1050 9.2 543.6 12.0 4077.0

5.0SMDJ6.0A 5RDG 5.0SMDJ6.0CA 5DDG 6.67 7.37 10 6.0 1050 10.3 485.5 13.4 3641.3

5.0SMDJ6.5A 5RDK 5.0SMDJ6.5CA 5DDK 7.22 7.98 10 6.5 750 11.2 446.5 14.6 3348.8

5.0SMDJ7.0A 5PDM 5.0SMDJ7.0CA 5DDM 7.78 8.60 10 7.0 300 12.0 416.8 15.6 3126.0

5.0SMDJ7.5A 5PDP 5.0SMDJ7.5CA 5DDP 8.33 9.21 1 7.5 150 12.9 387.7 16.8 2907.8

5.0SMDJ8.0A 5PDR 5.0SMDJ8.0CA 5DDR 8.89 9.83 1 8.0 70 13.6 367.7 17.7 2757.8

5.0SMDJ8.5A 5PDT 5.0SMDJ8.5CA 5DDT 9.44 10.40 1 8.5 30 14.4 347.3 18.7 2604.8

5.0SMDJ9.0A 5PDV 5.0SMDJ9.0CA 5DDV 10.00 11.10 1 9.0 12 15.4 324.8 20.0 2436.0

5.0SMDJ10A 5PDX 5.0SMDJ10CA 5DDX 11.10 12.30 1 10.0 6 17.0 294.2 22.1 2206.5

5.0SMDJ11A 5PDZ 5.0SMDJ11CA 5DDZ 12.20 13.50 1 11.0 2 18.2 274.8 23.7 2061.0

5.0SMDJ12A 5PEP 5.0SMDJ12CA 5BEP 13.30 14.70 1 12.0 2 19.9 252.0 25.9 1890.0

5.0SMDJ13A 5PEQ 5.0SMDJ13CA 5BEQ 14.40 15.90 1 13.0 2 21.5 233.0 28.0 1747.5

5.0SMDJ14A 5PER 5.0SMDJ14CA 5BER 15.60 17.20 1 14.0 2 23.2 216.0 30.2 1620.0

5.0SMDJ15A 5PES 5.0SMDJ15CA 5BES 16.70 18.50 1 15.0 2 24.4 205.0 31.7 1537.5

5.0SMDJ16A 5PET 5.0SMDJ16CA 5BET 17.80 19.70 1 16.0 2 26.0 193.0 33.8 1447.5

5.0SMDJ17A 5PEU 5.0SMDJ17CA 5BEU 18.90 20.90 1 17.0 2 27.6 181.0 35.9 1357.5

5.0SMDJ18A 5PEV 5.0SMDJ18CA 5BEV 20.00 22.10 1 18.0 2 29.2 172.0 38.0 1290.0

5.0SMDJ20A 5PEW 5.0SMDJ20CA 5BEW 22.20 24.50 1 20.0 2 32.4 155.0 42.1 1162.5

5.0SMDJ22A 5PEX 5.0SMDJ22CA 5BEX 24.40 26.90 1 22.0 2 35.5 141.0 46.2 1057.5

5.0SMDJ24A 5PEZ 5.0SMDJ24CA 5BEZ 26.70 29.50 1 24.0 2 38.9 129.0 50.6 967.5

5.0SMDJ26A 5PFE 5.0SMDJ26CA 5BFE 28.90 31.90 1 26.0 2 42.1 119.0 54.7 892.5

5.0SMDJ28A 5PFG 5.0SMDJ28CA 5BFG 31.10 34.40 1 28.0 2 45.4 110.0 59.0 825.0

5.0SMDJ30A 5PFK 5.0SMDJ30CA 5BFK 33.30 36.80 1 30.0 2 48.4 103.0 62.9 772.5

5.0SMDJ33A 5PFM 5.0SMDJ33CA 5BFM 36.70 40.60 1 33.0 2 53.3 93.9 69.3 704.3

5.0SMDJ36A 5PFP 5.0SMDJ36CA 5BFP 40.00 44.20 1 36.0 2 58.1 86.1 75.5 645.8

5.0SMDJ40A 5PFR 5.0SMDJ40CA 5BFR 44.40 49.10 1 40.0 2 64.5 77.6 83.9 582.0

5.0SMDJ43A 5PFT 5.0SMDJ43CA 5BFT 47.80 52.80 1 43.0 2 69.4 72.1 90.2 540.8

5.0SMDJ45A 5PFV 5.0SMDJ45CA 5BFV 50.00 55.30 1 45.0 2 72.7 68.8 94.5 516.0

5.0SMDJ48A 5PFX 5.0SMDJ48CA 5BFX 53.30 58.90 1 48.0 2 77.4 64.7 100.6 485.3

5.0SMDJ51A 5PFZ 5.0SMDJ51CA 5BFZ 56.70 62.70 1 51.0 2 82.4 60.7 107.1 455.3

5.0SMDJ54A 5RGE 5.0SMDJ54CA 5BGE 60.00 66.30 1 54.0 2 87.1 57.5 113.2 431.3

5.0SMDJ58A 5PGG 5.0SMDJ58CA 5BGG 64.40 71.20 1 58.0 2 93.6 53.5 121.7 401.3

5.0SMDJ60A 5PGK 5.0SMDJ60CA 5BGK 66.70 73.70 1 60.0 2 96.8 51.7 125.8 387.8

5.0SMDJ64A 5PGM 5.0SMDJ64CA 5BGM 71.10 78.60 1 64.0 2 103.0 48.6 133.9 364.5

5.0SMDJ70A 5PGP 5.0SMDJ70CA 5BGP 77.80 86.00 1 70.0 2 113.0 44.3 146.9 332.3

5.0SMDJ75A 5PGR 5.0SMDJ75CA 5BGR 83.30 92.10 1 75.0 2 121.0 41.4 157.3 310.5

5.0SMDJ78A 5PGT 5.0SMDJ78CA 5BGT 86.70 95.80 1 78.0 2 126.0 39.7 163.8 297.8

5.0SMDJ85A 5PGV 5.0SMDJ85CA 5BGV 94.40 104.00 1 85.0 2 137.0 36.5 178.1 273.8

5.0SMDJ90A 5PGX 100.00 111.00 1 90.0 2 146.0 34.3 189.8 257.3

5.0SMDJ100A 5PGZ 111.00 123.00 1 100.0 2 162.0 30.9 210.6 231.8

5.0SMDJ110A 5PHE 122.00 135.00 1 110.0 2 177.0 28.3 230.1 212.3

5.0SMDJ120A 5PHG 133.00 147.00 1 120.0 2 193.0 26.0 250.9 195.0

5.0SMDJ130A 5PHK 144.00 159.00 1 130.0 2 209.0 24.0 271.7 180.0

5.0SMDJ150A 5PHM 167.00 185.00 1 150.0 2 243.0 20.6 315.9 154.5

5.0SMDJ160A 5PHP 178.00 197.00 1 160.0 2 259.0 19.3 336.7 144.8

5.0SMDJ170A 5PHR 189.00 209.00 1 170.0 2 275.0 18.2 357.5 136.5

Speciﬁcations are subject to change without notice.

Users should verify actual device performance in their speciﬁc applications.

The products described herein and this document are subject to speciﬁc legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Product Dimensions

5.0SMDJ Transient Voltage Suppressor Diode Series

Recommended Footprint

Physical Specications

Encapsulation .............................Molded plastic per UL Class 94V-0

Polarity....................... Cathode band indicates unidirectional device

No cathode band indicates bidirectional device

DIMENSIONS: MM

(INCHES)

Dimension SMC (DO-214AB)

A6.60 - 7.11

(0.260 - 0.280)

B5.59 - 6.22

(0.220 - 0.245)

C2.90 - 3.20

(0.114 - 0.126)

D0.15 - 0.31

(0.006 - 0.012)

E7.75 - 8.13

(0.305 - 0.320)

F 0.05 - 0.20

(0.002 - 0.008)

G 2.01 - 2.62

(0.080 - 0.103)

H 0.76 - 1.52

(0.030 - 0.060)

DIMENSIONS: MM

(INCHES)

Dimension SMC (DO-214AB)

A (Max.) 4.69

(0.185)

B (Min.) 3.07

(0.121)

C (Min.) 1.53

(0.060)

(INCHES)

DIMENSIONS:

CATHODE BAND

(UNIDIRECTIONAL DEVICES ONLY)

(INCHES)

DIMENSIONS:

CATHODE BAND

(UNIDIRECTIONAL DEVICES ONLY)

Environmental Specications

Moisture Sensitivity Level ................................................................1

ESD Classication (HBM)............................................................. 3B

Speciﬁcations are subject to change without notice.

Users should verify actual device performance in their speciﬁc applications.

The products described herein and this document are subject to speciﬁc legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

100

0 1.0 2.0 3.0 4.0

T, Time (ms)

IP, Peak Pulse Current (%)

TA=25 °C

TR=10 µs

Half value= IRSM

Peak value (IRSM)

Pulse width (TP)

is defined as that point

where the peak current

decays to 50 % of IPSM.

10 x 1000 waveform

as defined by R.E.A.

100

050

25 75 100 150125 175 200

Junction Temperature (

Peak Pulse Derating in Percent of

Peak Power or Current

°C)

10 x 1000 Waveform as Defined

by R.E.A.

Peak Forward Surge Current (Amps)

250

200

150

100

300

12510 20 50 100

Number of Cycles at 60 Hz

300 A at 1 cycle

100 A at 80 cycles

4.0

5.0

3.0

2.0

1.0

0.0

05025 75 100 150125 175 200

TL, Lead Temperature (°C)

PM(AV) Steady State Power Dissipation (W)

6.0

6.5

5.5

4.5

3.5

2.5

1.5

0.5

0.1 µs1.0 µs10 µs100 µs1.0 ms 10 ms

td - Pulse Width (sec.)

0.1

100

1000

PPM

- Peak Pulse Power (kW)

TA = 25 °C

8.0 x 8.0 mm

(0.31 x 0.31 in.)

Copper Pad Areas

60 Hz Resistive or

Inductive Load

CJ - Junction Capacitance (pF)

100000

10000

100

110 100 1000

VBR - Reverse Breakdown Voltage (V)

1000 Unidirectional

@ VR

Bidirectional

@ VR

Unidirectional v=0v

Bidirectional v=0v

TJ = 25 °C

f = 1.0 MHz

Vsig = 50 mVp-p

5.0SMDJ Transient Voltage Suppressor Diode Series

Rating & Characteristic Curves

Pulse Derating Curve Maximum Non-Repetitive Surge Current

Pulse Waveform Typical Junction Capacitance

Pulse Rating Curve Steady State Power Derating Curve

Speciﬁcations are subject to change without notice.

Users should verify actual device performance in their speciﬁc applications.

The products described herein and this document are subject to speciﬁc legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

.......

....... ..............

P A

120 °

Index Hole

10 pitches (min.)

Direction of Feed

10 pitches (min.)

End

Trailer Device

Unidirectional

Product

Orientation Leader

Start

CDDFN5-0504N - TVS/Steering Diode Array

Packaging Information

The product will be dispensed in tape and reel format (see diagram below).

Devices are packed in accordance with EIA standard

EIA-481-D and specications shown here.

DIMENSIONS: MM

(INCHES)

Item Symbol SMC (DO-214AB)

7-Inch Reel 13-Inch Reel

Carrier Width A 6.0 ± 0.20

(0.236 ± 0.079)

Carrier Length B 8.3 ± 0.20

(0.327 ± 0.008)

Carrier Depth C 2.5 ± 0.20

(0.098 ± 0.008)

Sprocket Hole d 1.50 ± 0.10

(0.059 ± 0.004)

Reel Outside Diameter D 178

(7.008)

330

(12.992)

Reel Inner Diameter D1 50.0

(1.969) MIN.

Feed Hole Diameter D2 13.0 +0.50/-0.20

(0.512 +0.020/-0.008)

Sprocket Hole Position E 1.75 ± 0.10

(0.069 ± 0.004)

Punch Hole Position F 7.50 ± 0.10

(0.295 ± 0.004)

Punch Hole Pitch P 8.00 ± 0.10

(0.315 ± 0.004)

Sprocket Hole Pitch P0 4.00 ± 0.10

(0.157 ± 0.004)

Embossment Center P1 2.00 ± 0.10

(0.079 ± 0.004)

Overall Tape Thickness T 0.30± 0.10

(0.012 ± 0.004)

Tape Width W 16.00 ± 0.30

(0.630 ± 0.012)

Reel Width W122.4

(0.882) MAX.

Quantity per Reel -- 500 3,000

REV. 03/20

5.0SMDJ Transient Voltage Suppressor Diode Series

Speciﬁcations are subject to change without notice.

Users should verify actual device performance in their speciﬁc applications.

The products described herein and this document are subject to speciﬁc legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Legal Disclaimer Notice

This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its

afliates (collectively, “Bourns”).

Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change

without notice. Users should check for and obtain the latest relevant information and verify that such information is current and

complete before placing orders for Bourns® products.

The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and

statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical

requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary

from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components

in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®

product also can and do vary in different applications and actual performance may vary over time. Users should always verify

the actual performance of the Bourns® product in their specic devices and applications, and make their own independent

judgments regarding the amount of additional test margin to design into their device or application to compensate for

differences between laboratory and real world conditions.

Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry

standard (e.g., ISO/TS 16949) or a particular qualication (e.g., UL listed or recognized), Bourns is not responsible for any

failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualication. Users of

Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their

devices or applications.

Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap-

plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or

environmental damage. Unless expressly and specically approved in writing by two authorized Bourns representatives on a

case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s

sole risk. Life-critical applications include devices identied by the U.S. Food and Drug Administration as Class III devices and

generally equivalent classications outside of the United States.

Bourns expressly identies those Bourns® standard products that are suitable for use in automotive applications on such

products’ data sheets in the section entitled “Applications.” Unless expressly and specically approved in writing by two

authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive

application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns

expressly identies a sub-category of automotive application in the data sheet for its standard products (such as infotainment

or lighting), such identication means that Bourns has reviewed its standard product and has determined that if such Bourns®

standard product is considered for potential use in automotive applications, it should only be used in such sub-category of

automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard

or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.

Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally

or any other generally equivalent governmental organization standard applicable to products designed or manufactured for

use in aircraft or space applications. Bourns expressly identies Bourns® standard products that are suitable for use in aircraft

or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specically

approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard

product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the

user’s sole risk.

The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and

the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the

user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply

to such Bourns® custom products.

Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the

design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use

Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions

apply to all uses and applications that violate national or international prohibitions, including embargos or international

regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be

exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior

authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible

to receive U.S. commodities, software, and technical data.

To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,

incidental or indirect damages or lost revenues or lost prots, and (ii) any and all implied warranties, including implied warranties

of tness for particular purpose, non-infringement and merchantability.

For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplied Chinese

bilingual versions are available at:

Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies

PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf

C1753 05/17/18R