REVISIONS REV ECO A - DESCRIPTION RELEASE DATE BY APPR 19SEP13 DRP - 46.4 TITLE: 21 KIT, AT SERIES, 6 POS RECEPTACLE, CONTACTS, AND WEDGELOCK 8 24.4 KIT CONTENTS 1 3 DWG NO: 2 A 4. AVAILABLE HAND CRIMPER: CA-5D12 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC 0.30 Fractions 1/64 2 PL DEC 0.15 Angles 1 3 PL DEC 0.08 8 CONTACT SIZE AND REAR SEAL WIRE RANGE: CONTACT MIN. INSUL. SIZE O.D. MAX. INSUL. TYPICAL O.D. WIRE RANGE 3) Note reference = X 16 3.68 mm (.145 in) SIGNATURES DRAWN: D.PARKS ITEM Amphenol DATE 19SEP13 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: 2.24 mm (.088 in) 3 2 1 DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY UNLESS OTHERWISE SPECIFIED 7 WIRE RANGE OF CONTACTS INCLUDED IN KIT: 16 - 20 AWG CONTACT, PIN, SOLID, SIZE 16, 16-20 AWG P-WEDGELOCK, 6 POSITION, AT SERIES RECEPTACLE, 6 PIN, AT SERIES KIT, AT SERIES, 6 POSITION RECEPTACLE, CONTACTS, AND WEDGELOCK THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- 14 - 20 AWG NEXT ASS'Y: NONE DWG NO: REVISION AT04-6P-KIT01 SHEET A 1 OF 1 1 6. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. 2. SPECIFICATIONS: 2.1 CURRENT RATING: 13 AMPS 2.2 OPERATING TEMPERATURE: -55C TO +125C 2.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 2.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25C. 2.5 CONTACT MILLIVOLT DROP: 60 MILLIVOLT DROP @ 13 AMP TEST CURRENT. 2.6 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 2.7 CONNECTOR MATING CYCLE DURABILITY: 100 CYCLES AT60-202-16141 AW6P AT04-6P OF: 5. ALL COMPONENTS ARE RoHS COMPLIANT. 6 1 1 1 7 SH: 1. MATERIAL: HOUSING: THERMOPLASTIC; COLOR: GREY WEDGELOCK: THERMOPLASTIC; COLOR: GREEN SEALS: SILICONE RUBBER CONTACTS: COPPER ALLOY; NICKEL PLATED 3. MATING PART: AT06-6S* PLUG ( * = MODIFICATIONS AND COLORS ) REV: NOTES: UNLESS OTHERWISE SPECIFIED AT04-6P-KIT01 REFERENCE DIMENSIONS - ASSEMBLED