New Product Communication Unit for Open Network Fiber Sensor Guide Book The digital sensor can be connected directly to the 3 types of open network! Other types of analog input sensors can also be connected! Fiber Sensor Guide Book On sale soon Scattered digital sensors can be centrally managed and set through an open network. Applicable Digital Sensor Please contact .......... Digital Fiber Sensor Digital Laser Sensor Digital Pressure Sensor Panasonic Electric Works SUNX Co., Ltd. 2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan Telephone: +81-568-33-7211 Facsimile: +81-568-33-2631 Global Sales & Marketing Division Telephone: +81-568-33-7861 Facsimile: +81-568-33-8591 panasonic-electric-works.net/sunx All Rights Reserved No. CE-FIBERGUIDE-7 October, 2011 Specifications are subject to change without notice. Panasonic Electric Works SUNX Co., Ltd. 2011 Printed in Japan 2011.10 panasonic-electric-works.net/sunx GENERAL TERMS AND CONDITIONS Please read this document carefully with respect to our product warranty policy before using our Panasonic Electric Works SUNX products ("Products"). If you have any questions or comments regarding do's and don'ts of the Products, please consult your local Panasonic Electric Works SUNX authorized dealer for the correct use and application of the Products. 1. PRODUCT MODIFICATION & DISCONTINUANCE: Panasonic Electric Works SUNX expressly reserves the right to modify, including the right to discontinue, any of the Products, prior to their order, from time to time without notice. 2. WARRANTIES: (1) Subject to the exclusions stated in 3 (EXCLUSIONS) herein below, Panasonic Electric Works SUNX warrants the Products to be free of defects in material and workmanship for a period of one (1) year from the date of shipment under normal usage in environments commonly found in manufacturing industry. (2) Any Products found to be defective must be shipped to Panasonic Electric Works SUNX with all shipping costs paid by Purchaser or offered to Panasonic Electric Works SUNX for inspection and examination. Upon examination by Panasonic Electric Works SUNX, Panasonic Electric Works SUNX will, at its sole discretion, repair or replace at no charge, or refund the purchase price of, any Products found to be defective. 3. EXCLUSIONS (1) This warranty does not apply to defects resulting from any cause: (i) which was due to abuse, misuse, mishandling, improper installation, improper interfacing, or improper repair by Purchaser; (ii) which was due to unauthorized modification by Purchaser, in part or in whole, whether in structure, performance or specification; (iii) which was not discoverable by a person with the state-of-the-art scientific and technical knowledge at the time of manufacture; (iv) which was due to an operation or use by Purchaser outside of the limits of operation or environment specified by Panasonic Electric Works SUNX; (v) which was due to Force Majeure; and (vi) which was due to any use or application expressly discouraged by Panasonic Electric Works SUNX in 5 (CAUTIONS FOR SAFE USE) hereunder. (2) This warranty extends only to the first purchaser for application, and is not transferable to any person or entity which purchased from such purchaser for application. (3) The performance data presented in this catalogue is only for guidance and shall not constitute any performance warranty by Panasonic Electric Works SUNX. 4. DISCLAIMERS (1) Panasonic Electric Works SUNX's sole obligation and liability under this warranty is limited to the repair or replacement, or refund of the purchase price, of a defective Product, at Panasonic Electric Works SUNX's option. (2) THE REPAIR, REPLACEMENT, OR REFUND IS THE EXCLUSIVE REMEDY OF THE PURCHASER, AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF PROPRIETARY RIGHTS, ARE HEREBY EXPRESSLY DISCLAIMED. IN NO EVENT SHALL PANASONIC ELECTRIC WORKS SUNX AND ITS AFFILIATED ENTITIES BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCTS, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMANGES RESULTING FROM LOSS OF USE, BUSINESS INTERRUPTION, LOSS OF INFORMATION, LOSS OR INACCURACY OF DATA, LOSS OF PROFITS, LOSS OF SAVINGS, THE COST OF PROCUREMENT OF SUBSTITUTED GOODS, SERVICES OR TECHNOLOGIES, OR FOR ANY MATTER ARISING OUT OF OR IN CONNECTION WITH THE USE OR INABILITY TO USE THE PRODUCTS. 5. CAUTIONS FOR SAFE USE (1) The applications shown in this catalogue are only suggestions, and it is Purchaser's sole responsibility to ascertain the fitness and suitability of the Products for any particular application, as well as to abide by Purchaser's applicable local laws and regulations, if any. (2) Never use the Products NOT rated or designated as "SAFETY SENSOR" in any application involving risk to life or property. When such a use is made by Purchaser, such Purchaser shall indemnify and hold harmless Panasonic Electric Works SUNX from any liability or damage whatsoever arising out of or in relation to such use. (3) In incorporating the Products to any equipment, facilities or systems, it is highly recommended to employ fail-safe designs, including but not limited to a redundant design, flame propagation prevention design, and malfunction prevention design so as not to cause any risk of bodily injury, fire accident, or social damage due to any failure of such equipment, facilities or systems. (4) The Products are each intended for use only in environments commonly found in manufacturing industry, and, unless expressly allowed in this catalogue, specification or otherwise, shall not be used in, or incorporated into, any equipment, facilities or systems, such as those: (a) which are used for the protection of human life or body parts; (b) which are used outdoors or in environments subject to any likelihood of chemical contamination or electromagnetic influence; (c) which are likely to be used beyond the limits of operations or environments specified by Panasonic Electric Works SUNX in this catalogue or otherwise; (d) which may cause risk to life or property, such as nuclear energy control equipment, transportation equipment (whether on rail or land, or in air or at sea), and medical equipment; (e) which are operated continuously each day for 24 hours; and (f) which otherwise require a high level of safety performance similar to that required in those equipment, facilities or systems as listed in (a) through (e) above. 6. EXPORT CONTROL LAWS In some jurisdictions, the Products may be subject to local export laws and regulations. If any diversion or re-export is to be made, Purchaser is advised to abide by such local export laws and regulations, if any, at its own responsibility. 7. PURCHASER'S TRASFER OBLIGATIONS If Purchaser resell or deliver the Products to a third party, Purchaser must provide such third party with a copy of this document, all specifications, manuals, catalogs, leaflets and written information of any kind provided to Purchaser by Panasonic Electric Works SUNX or its authorized local representative from time to time regarding the Products. INDEX Fiber Selection Guide Choose by model Choose by shape/application 3 Viewing new models 4 New Product Introduction Tough Fiber Fibers Super Quality Amplifiers 6 8 Threaded Type 10 Cylindrical Type 12 Sleeve 14 Flat Type 16 Small Spot 18 Narrow Beam 19 Wide Beam 20 Convergent Reflective Type 21 Retroreflective Type 22 Chemical-resistant 23 Heat-resistant 24 Vacuum-resistant 26 Liquid Leak / Liquid Detection 28 30 Fiber Options Fiber Dimensions 2 Thru-beam Type 34 Retroreflective Type 41 Reflective Type 42 Others 51 FX-500 series 56 FX-100 series 66 INDEX 76 Earlier Models Comparison Table 80 2 New product introduction Tough Fiber Fiber Selection Guide Choose by model Thru-beam type Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table Retroreflective type Page Model No. FT-140 FT-30 FT-31 FT-31S FT-31W FT-40 FT-42 FT-42S FT-42W FT-43 FT-45X FT-A11 FT-A11W FT-A32 FT-A32W FT-AL05 FT-E13 FT-E23 FT-F93 FT-H13-FM2 FT-H20-J20-S FT-H20-J30-S FT-H20-J50-S FT-H20-M1 FT-H20-VJ50-S FT-H20-VJ80-S FT-H20W-M1 FT-H30-M1V-S FT-H35-M2 FT-H35-M2S6 FT-HL80Y FT-KS40 FT-KV26 FT-KV40 FT-KV40W FT-L80Y FT-R40 FT-R41W FT-R42W FT-S11 FT-S20 FT-S21 FT-S21W FT-S30 FT-S31W FT-S32 FT-V23 FT-V24W FT-V25 FT-V30 FT-V40 FT-V80Y FT-WZ4 FT-WZ7 FT-Z20HBW FT-Z30 FT-Z30E Page Sensing range Dimensions Specifications P.10 P.9 P.10 P.15 P.10 P.9 P.10 P.15 P.34 Model No. FT-Z30EW FT-Z30H FT-Z30HW FT-Z30W FT-Z40HBW FT-Z802Y Page Sensing range Dimensions Specifications P.39 P.16 P.40 Model No. FR-KZ22E FR-KZ50E FR-KZ50H FR-Z50HW Sensing range Dimensions Specifications P.19/P.22 P.41 P.23 P.10 P.20 P.35 Reflective type Page P.12/P.15 Model No. P.28 P.24 P.36 P.26 P.24 P.23 P.19 P.23 P.37 P.10 P.12 P.9 P.12 P.9 P.12 P.38 P.15 P.12 P.23 P.39 P.16 FD-30 FD-31 FD-31W FD-32G FD-32GX FD-40 FD-41 FD-41S FD-41SW FD-41W FD-42G FD-42GW FD-60 FD-61 FD-61G FD-61S FD-61W FD-62 FD-64X FD-A16 FD-AL11 FD-E13 FD-E23 FD-EG30 FD-EG30S FD-EG31 FD-F4 FD-F41 FD-F41Y FD-F71 FD-F8Y FD-FA93 FD-H13-FM2 FD-H18-L31 FD-H20-21 FD-H20-M1 Page Sensing range Dimensions Specifications P.9 P.11 P.11/P.18 P.9 P.11 P.42 P.15 P.11 P.11/P.18 P.9 P.11 P.43 P.15 P.11 P.20 P.44 P.13/P.15 P.11/P.18 P.15 P.11/P.18 P.45 P.28 P.25 P.46 Model No. FD-H25-L43 FD-H25-L45 FD-H30-KZ1V-S FD-H30-L32 FD-H30-L32V-S FD-H35-20S FD-H35-M2 FD-H35-M2S6 FD-HF40Y FD-L10 FD-L11 FD-L12W FD-L20H FD-L21 FD-L21W FD-L22A FD-L23 FD-L30A FD-L31A FD-L32H FD-R60 FD-S21 FD-S30 FD-S31 FD-S32 FD-S32W FD-S33GW FD-V30 FD-V30W FD-V50 FD-WZ4 FD-WZ7 FD-Z20HBW FD-Z40HBW FD-Z50HW Sensing range Dimensions Specifications P.25 P.46 P.26 P.25 P.26 P.47 P.25 P.28 P.21 P.11 P.13 P.9 P.48 P.49 P.13 P.15 P.50 P.17 P.19 3 Fiber Selection Guide Choose by quality New product introduction Choose by shape Tough Fiber Super Quality Threaded Type Cylindrical Type he variance of T beam intensity and beam axis is extremely small. Standard type which is mounted using nuts. Has a slender shape that is mounted using set screws. Flat Type Sleeve uitable for sensing S in narrow locations and sensing minute objects. Thin and rectangular shape. Installed directly in narrow locations with screws. Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers P.8 P.10 P.12 P.14 P.16 Super Quality Threaded Type Cylindrical Type Choose by beam shape Small Spot enses minute S objects using a spot lens. Narrow Beam Not easily affected by surrounding obstacles. Sleeve Convergent Reflective Type Wide Beam Senses in the beam band without missing a work. Senses in the limited range only. Retroreflective Type Ideal for sensing transparent objects Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant P.18 P.19 P.20 P.21 P.22 Choose by environment/performance Chemical-resistant Heat-resistant Various kinds of liquids can be detected due to the fluorine contained resin case ithstands at -60 C W -76 F to 350 C 662 F Vacuum-resistant Usable in hightemperatures of 300 C 572 F and vacuum Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Liquid Leak / Liquid Detection orresponds to C various liquid events. Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others P.23 P.24 P.26 Amplifiers P.28 FX-500 series FX-100 series Fiber amplifiers guidance Digital fiber sensor FX-500 series Digital fiber sensor FX-100 series At the industry's leading edge INDEX Super functionality, yet, economical price Earlier models comparison table P.56 P.66 4 New product introduction Tough Fiber Fiber Selection Guide Viewing new models Applies to the fiber marked Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type Cylindrical Type F Series Name - in the model name field (P.8~P.29) *1 Type Shape, etc. Symbol Details T Thru-beam type D Reflective type R Retroreflective type Functions/Features Symbol None G S H E HB A Sleeve Flat Type *1: Excluding liquid leak / liquid detection fiber Details General-purpose Coaxial reflective Sleeve Top sensing * Side sensing * Top sensing + Bent * Alignment * is for Flat type (Z and KZ) only Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Symbol None Vacuumresistant Liquid Leak / Liquid Detection Fiber Options R S KS Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers V KV E EG Z FX-500 series FX-100 series KZ A INDEX Earlier models comparison table AL L F Lead No. 3 4 Treaded type 6 14 4 Elbow or square head 6 1 2 Cylindrical type 3 Narrow beam 4 2 3 Side-view 4 5 4 Narrow beam / Side-view 2 1 Ultra small diameter 2 Coaxial 3 2 3 Flat type 4 5 2 Narrow beam 5 3 Wide beam 1 1 Array 0 1 2 Convergent reflective type 3 9 Liquid leak / Liquid detection 7 Details Details M3 M4 M6 M14 M4 M6 o1 mm o1.5 mm o2.5 or o3 mm o3.7 mm o2 mm o2.5 or o3 mm o4 mm o5 mm o4 mm 1.5 x 2 mm Fiber o0.125 mm Fiber o0.25 mm M3 Thickness 2 mm Thickness 3 mm Thickness 3.5 mm Thickness 5.2 mm Thickness 2.2 mm Thickness 5.2 mm Sensing width 32 mm Sensing width 10 to 19 mm Sensing width 11.1 mm Sensing width 5.5 mm Sensing range 0 to 10 mm (STD) Sensing range 11 to 30 mm (STD) Sensing range 31mm or more (STD) Mountable on pipe Liquid leak Symbol None W X Y Details General-purpose Sharp bending Stainless-jacketed Chemical-resistant 5 6 New product introduction Tough Fiber Fiber Selection Guide Choose by model Tough Fiber Conventional 3 types rolled into 1 !! New standard fiber Choose by shape/ application Viewing new models Flexible fiber Fibers Super Quality Threaded Type Cylindrical Type Flexible durability 1 million times Sleeve Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Sharp bending fiber Bending radius R2 ~R1 mm Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Tough Fiber Break-free Flexible durability 10 million times (Typical) Bending conditions Bending radius: R10 mm Reciprocating bending: 180 More flexible ~R4 Bending radius R2 mm General purpose fiber Bending radius R25mm ed gs are us steel fittin ls. e d o m ll Stainless head of a r e b fi e for th s to RoHS tery nform Clearly co d for secondary bat se u th e g b n re an st C mounting Improved Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table Introducing a tough fiber that transcends common knowledge! It has toughness that can be used in moving parts, toughness that can be bent with precision, and high-quality for all purposes. It changes common knowledge about fibers. 7 Break-free New product introduction Tough Fiber Flexible durability 10 million times Fiber Selection Guide Choose by model (Typical) Choose by shape/ application Bending conditions Bending radius: R10 mm R0.394 in, Reciprocating bending: 180 Viewing new models Fibers More flexible Ex) FT-31 Super Quality Cylindrical Type Ex) FT-42 Sleeve Flat Type R2 mm R0.079 in R M3 Threaded Type R2 to R4 mm R0.079 to R0.157 in M4 R4 mm R0.157 in Small Spot R Narrow Beam Wide Beam Convergent Reflective Type O2.2 mm O0.087 in O1 mm O0.039 in Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant Reduced the time for selecting fiber and registration numbers For Designers High-quality High-q uality in whichever tough fiber you choose! Easy selection! Reduced risk of breaking and bending during installation! For Buyers Fiber Options Low P Cost Liquid Leak / Liquid Detection rice savings! Reduced registration numbers! Reduced frequency of maintenance stockpiling and replacement! Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers Reduced variation in sensing FX-500 series FX-100 series Beams at the fiber aperture are uniform, leading to stable sensing. Previous flexible fiber Previous sharp Generally flexible fibers and bending fiber sharp bending fibers are composed of multiple fiber cores, often resulting in large variations in light intensity. New fiber The new standard fiber is composed of a single fiber core, achieving uniform light intensity. Uniform and highly accurate sensing Stable sensing even if the fiber is bent INDEX Earlier models comparison table 8 New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type Cylindrical Type Sleeve Flat Type Super Quality It is a fiber with superior light intensity stability and simple digital management when combined with the FX-500 series amplifier. It offers stable sensing with an extremely small beam axis curvature and gap. FT-40 Digital management is simple due to small differences in body. When combined with the FX-500 series amplifiers, it has up to 4 times improved stability of incident light intensity compared with traditional fibers. Management is simple even when replacing amplifiers because the digital display shows the approximate value. Super quality fiber FX-500 series "Stabilized incident light intensities" even in multiple units Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Emitter intensity is also stable due to few curvatures and gaps in the beam axis. Liquid Leak / Liquid Detection Variation in emission intensity of the fiber core is controlled down to less than 10 %, achieving a stable detection. Beam axis deviation: Thru-beam type within 2, Reflective type within 3 Beam axis centering precision: within 150 m o2.2 mm o0.087 in standard fiber Expanded temperature range Single core standard fiber with high flexibility Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table Ambient temperature [-40 to +70 C -40 to +158 F in previous] -55 to +80 C -67 to +176 F 1.2 times more than previous Integrated high-precision plug The centering precision of the fiber core attached to the inserting plug is doubled. As the insertion precision is increased, the variation among units can be greatly suppressed. Centering precision: within 40 m More flexible! R4 Previous Stable emission intensity within 10 % New material Vacuumresistant In general, high-flexibility types adopt a multi-fiber core which may result in large variation in light emission. Bending radius [Previous is R25 mm R0.984 in] R4 mm R0.157 in 1/6 of that of previous More bendable! Bending durability [Previous is 1,000 times] 10 million times 10,000 times more than previous *Bending conditions Bending radius: R10 mm R0.39 in, Reciprocating bending 180 9 New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Thru-beam type (one pair set) M3 M3 Model No. 7RXJK FT-30 12 M4 M4 Threaded Type Shape of fiber head (mm) 7RXJK FT-40 o1*5 o1.5 10 o3 o3 Cylindrical 15 10 7RXJK FT-S20 7RXJK FT-S30 Fibers Fiber Bending cable radius length : (mm) Free-cut R2 Bending durability R4 Bending durability R2 2m Bending durability R4 Bending durability Sensing range (mm in) FX-500 series STD 400 15.748 HYPR 1,350 53.150 STD 1,200 47.244 HYPR (Note) 3,600 141.732 STD 400 15.748 HYPR 1,350 53.150 STD 1,200 47.244 HYPR (Note) 3,600 141.732 U-LG LONG FAST H-SP 810 31.890 650 25.591 210 8.268 75 2.953 2,200 86.614 1,700 66.929 530 20.866 190 7.480 810 31.890 650 25.591 210 8.268 75 2.953 2,200 86.614 1,700 66.929 530 20.866 190 7.480 Beam axis FX-101 Beam position/ Optical Ambient (Upper value) axis dia. Inclination transmission Protection temp. FX-102 (mm) of beam loss (Lower value) axis 135 5.315 o0.5 400 15.748 320 12.598 870 34.252 o1 150 m 10 % /2 IP67 -55 to +80 C M3 Model No. FD-30 M4 7RXJK FD-40 Convergent Reflective Type o1 Retroreflective Type o3 Chemicalresistant Sensing range (mm in) (Note) Beam axis Optical FX-101 position/ Ambient U-LG transmission Protection (Upper value) Inclination of temp. LONG FX-500 series loss FX-102 beam axis FAST (Lower value) H-SP FD-60 o3 10 7RXJK FD-S30 STD 160 6.299 HYPR 600 23.622 R2 Bending durability 2m 7RXJK M6 17 Cylindrical Fiber Bending cable radius length : (mm) Free-cut 14 M6 Threaded 12 M4 Narrow Beam Wide Beam 7RXJK M3 Small Spot Heatresistant Reflective type Shape of fiber head (mm) Cylindrical Type Sleeve Note: The fiber cable length practically limits the sensing range. Type Threaded Type Flat Type 135 5.315 400 15.748 o0.5 320 12.598 870 34.252 Super Quality R4 Bending durability STD HYPR 520 20.472 1,550 61.024 STD 160 6.299 HYPR 600 23.622 330 12.992 250 9.843 80 3.150 25 0.984 Liquid Leak / Liquid Detection Fiber Options 45 1.772 155 6.102 900 35.433 740 29.134 140 5.512 260 10.236 420 16.535 90 3.543 330 12.992 250 9.843 80 3.150 25 0.984 Vacuumresistant 150 m /3 10 % IP67 -55 to +80 C 45 1.772 155 6.102 Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Note: The sensing range is specified for white non-glossy paper. Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 7RXJK : It is a fiber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180) and bendable (bending radius: R4 mm or less) features. 10 New product introduction Tough Fiber Threaded Type It is a standard fiber which is mounted using nuts. It has reasonable pricing while drastically improving flexing performance. With the lens installable type, long distance sensing and microscopic object sensing is possible by installing a lens. A protective tube and a sturdy stainless jacket type that prevents disconnection are also prepared. Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Stainless steel fittings are used for the fiber head of all models. SUS FD-32G Thru-beam type (one pair set) Shape of fiber head (mm) M3 M3 Lens mountable Thru-beam Type M4 Lens mountable FT-43 7RXJK FT-42 Threaded M4 R2 Bending durability R1 R4 Bending durability FT-42W R1 FT-45X R4 15 Lens mountable, Stainless-jacketed M4 M4 Long range Square head Elbow 20 M14 Earlier models comparison table FT-31W Fiber Bending cable radius length : (mm) Free-cut 15 Others INDEX M4 Lens mountable Reflective Type FX-100 series FT-31 15 Retroreflective Type FX-500 series 7RXJK 12 Fiber Dimensions Amplifiers Model No. 12 M3 Fiber Options Type Lens mountable 7RXJK 15 M4 M4 FT-R40 With expansion lens M4 R4 Bending durability FT-R41W W7 x H9 x D13.9 R1 FT-R42W W7 x H9 x D14.4 With expansion lens Improved specularity High precision polishing is accomplished by using the PCTC polishing technique. The specularity of the end face of the fiber is 5 times greater. Light intensity is increased, enabling stable sensing. *For details, please see our website. Sensing the presence of workpiece Heatresistant Liquid Leak / Liquid Detection The beam axis deviation of each unit is kept within 3 and the beam axis centering accuracy is kept within 150 m. (Within 5 and 90 m for ultra small diameter fibers) Makes beam axis adjustment easier Improves mounting hole machining accuracy Improves sensing accuracy Made of resin Metallic particulate production ratio: ZERO Effect on magnetic fields: ZERO Convergent Reflective Type Vacuumresistant Improved centering accuracy Metal-free fiber FT-41, FD-G60, FD-G40 Wide Beam Chemicalresistant More user-friendly, high quality fiber * Some models not included (FT-R41W, FT-R42W, FT-140) Narrow Beam Retroreflective Type <Thru-beam type>FT-31/31W/43/42/42W FT-45X/R40 <Reflective type> FD-31/41/62/61/R60 Clearly conforms to RoHS Can be used for secondary battery Improved mounting strength Application M14 40 7RXJK FT-140 R4 Bending durability FT-R41W FT-42 FX-101 Beam (Upper value) axis dia. FX-102 (mm) (Lower value) Beam axis position/ Ambient Inclination Protection temp. of beam axis 130 5.118 340 13.386 150 m /2 -55 to +80 C 150 m /3 -40 to +60 C 150 m /2 -55 to +80 C Sensing range (mm in) (Note 1) FX-500 series STD 315 12.402 HYPR 1,350 53.150 STD 260 10.236 HYPR 990 38.976 STD 1,400 55.118 2 m HYPR (Note 2) 3,600 141.732 STD 1,130 44.488 HYPR (Note 2) 3,600 141.732 STD 800 31.496 HYPR 3,300 129.921 STD 1,200 47.244 1m HYPR (Note 2) 1,600 62.992 STD 930 36.614 HYPR (Note 2) 3,600 141.732 STD 800 31.496 2 m HYPR 3,200 125.984 STD 2,200 86.614 HYPR (Note 2) 3,600 141.732 STD (Note 2) 19,600 771.654 10 m HYPR (Note 2) 19,600 771.654 U-LG LONG FAST H-SP 770 30.315 550 21.654 210 8.268 70 2.756 590 23.228 440 17.323 150 5.906 53 2.087 2,800 110.236 2,100 82.677 770 30.315 240 9.449 2,050 80.709 1,600 62.992 530 20.866 190 7.480 1,900 74.803 1,400 55.118 490 19.291 160 6.299 1,600 62.992(Note 2) 1,600 62.992(Note 2) 630 24.803 200 7.874 1,750 68.898 1,500 59.055 500 19.685 160 6.299 1,800 70.866 1,400 55.118 460 18.110 150 5.906 3,600 141.732(Note 2) 3,500 137.795 1,300 51.181 460 18.110 19,600 771.654(Note 2) 19,600 771.654(Note 2) 16,000 629.921 6,300 248.031 o0.5 80 3.150 240 9.449 350 13.780 970 38.189 o1.5 300 11.811 800 31.496 IP67 260 10.236 720 28.346 340 13.386 920 36.220 150 m /3 -40 to +60 C 150 m /2 -55 to +80 C o1 270 10.630 740 29.134 250 9.843 710 27.953 510 20.079 2,000 78.740 o2.2 14,000 551.181 19,600 771.654 o10 (Note 2) IP40 -40 to +60 C IP67 -40 to +70 C Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The fiber cable length practically limits the sensing range. 7RXJK : It is a fiber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180) and bendable (bending radius: R4 mm or less) features. 11 Coaxial type FD-G in which high-precision positioning can be achieved. Fiber options Type Shape of fiber head (mm) Model No. 7RXJK M3 FD-31 12 M3 FD-31W 12 Coaxial, Lens mountable M3 M3 17 Coaxial, Lens mountable, Stainless-jacketed M3 7RXJK FD-32G FD-32GX Ultra-small diameter 18 Coaxial, Lens mountable M3 FD-EG30 16 Coaxial, Lens mountable M3 FD-EG31 16 7RXJK M4 FD-41 14 M4 Threaded M4 FD-41W 14 Coaxial, Lens mountable M4 25 7RXJK FD-42G Coaxial, Lens mountable M4 25 M6 FD-42GW FD-62 17 7RXJK M6 FD-61 17 M6 M6 FD-61W 17 Coaxial M6 7RXJK FD-61G 17 Stainless-jacketed M6 FD-64X Elbow 22 15 M6 7RXJK FD-R60 Fiber Bending cable radius length : (mm) Free-cut P.32 Fiber Selection Guide Choose by model Protective tube P.33 Choose by shape/ application *FTP- *FDP- Sensing range (mm in) (Note 1, 2) FX-101 U-LG (Upper value) LONG FX-500 series FX-102 FAST (Lower value) H-SP 290 11.417 STD 125 4.921 220 8.661 35 1.378 Bending 80 3.150 140 5.512 HYPR 25 0.984 durability 515 20.276 STD 180 7.087 80 3.150 140 5.512 15 0.591 R1 45 1.772 60 2.362 2 m HYPR 12 0.472 330 12.992 STD 380 14.961 R2 200 7.874 270 10.630 70 2.756 Bending 95 3.740 190 7.480 HYPR 27 1.063 durability 650 25.591 STD 410 16.142 200 7.874 360 14.173 75 2.953 1m R2 100 3.937 210 8.268 HYPR (Note 3) 30 1.181 630 24.803 STD 130 5.118 48 1.890 110 4.331 20 0.787 30 1.181 70 2.756 HYPR 9 0.354 170 6.693 500 mm R4 STD 45 1.772 20 0.787 35 1.378 7 0.276 12 0.472 25 0.984 HYPR 3.5 0.138 85 3.346 290 11.417 STD R2 125 4.921 220 8.661 35 1.378 Bending 80 3.150 140 5.512 HYPR 25 0.984 durability 515 20.276 STD 630 24.803 270 10.630 430 16.929 80 3.150 R1 150 5.906 230 9.055 HYPR 45 1.772 900 35.433 STD 380 14.961 R2 200 7.874 270 10.630 70 2.756 Bending 95 3.740 190 7.480 HYPR 27 1.063 durability 650 25.591 340 13.386 STD 150 5.906 280 11.024 45 1.772 R1 90 3.543 140 5.512 HYPR 25 0.984 670 26.378 2 m STD 1,000 39.370 520 20.472 940 37.008 170 6.693 340 13.386 450 17.717 HYPR R4 110 4.331 1,500 59.055 Bending STD 840 33.071 durability 450 17.717 670 26.378 120 4.724 200 7.874 410 16.142 HYPR 70 2.756 1,400 55.118 STD 630 24.803 270 10.630 430 16.929 80 3.150 R1 150 5.906 230 9.055 HYPR 45 1.772 900 35.433 STD 800 31.496 R4 420 16.535 650 25.591 120 4.724 Bending 200 7.874 350 13.780 HYPR 60 2.362 durability 1,100 43.307 STD 500 19.685 280 11.024 410 16.142 75 2.953 1m R4 160 6.299 220 8.661 HYPR 50 1.969 670 26.378 STD 600 23.622 R4 290 11.417 550 21.654 110 4.331 Bending 2 m HYPR 190 7.480 240 9.449 65 2.559 durability 1,100 43.307 R2 Tough Fiber Reflective type P.30~ Supports spot lenses and zoom lenses! Lens Lens (For thru-beam type fiber) (For reflective type fiber) It is a coaxial fiber that encloses the circumference of the emitter fiber at the center with the receiver fiber. This is suitable for high-precision positioning. It can perform sensing without affecting the approach direction of the work. New product introduction Viewing new models Fibers Beam axis position/ Ambient Protection Inclination of temp. beam axis 150 m /3 -55 to +80 C IP67 -40 to +60 C Super Quality Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Narrow Beam -55 to +80 C Convergent Reflective Type Retroreflective Type IP40 -40 to +70 C -20 to +60 C 150 m /3 Wide Beam Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection -55 to +80 C IP67 Fiber Options -40 to +60 C -55 to +80 C Fiber Dimensions -40 to +60 C Retroreflective Type IP40 Thru-beam Type Reflective Type Others 150 m /3 -55 to +80 C IP67 Amplifiers -40 to +60 C FX-500 series FX-100 series IP40 -55 to +80 C 150 m /3 IP67 Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The sensing range is specified for white non-glossy paper. 3) The allowable cutting range is 700 mm 27.559 in from the end that the amplifier inserted. 7RXJK : It is a fiber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180) and bendable (bending radius: R4 mm or less) features. INDEX Earlier models comparison table 12 New product introduction Tough Fiber Cylindrical Type Has a slender shape which can be mounted in narrow locations using set screws. Line up that includes ultra-thin fibers with o0.25 mm tips. Fiber Selection Guide Choose by model Viewing new models Fibers Super Quality Threaded Type Cylindrical Type Sleeve Flat Type FD-S31 FT-S32 Choose by shape/ application <Thru-beam type> FT-S21/S21W/S31W <Reflective type> FD-S32/S31 User-friendly, high quality fiber Improved centering accuracy and specularity Stainless steel fittings are used for the fiber head of all models. Clearly conforms to RoHS Can be used for secondary battery Improved mounting strength Small Spot Narrow Beam Wide Beam Convergent Reflective Type Thru-beam type (one pair set) Retroreflective Type Chemicalresistant Type Shape of fiber head (mm) Heatresistant o1 o1 Vacuumresistant 6 Liquid Leak / Liquid Detection o1.5 o1*5 10 Fiber Options o1.5 10 Amplifiers FX-500 series FX-100 series o2*5 o3 Others 8 o3 10 o4 Reflective Type Cylindrical Retroreflective Type o2.5 o3 Thru-beam Type 7RXJK FT-S11 7RXJK FT-S21 FT-S21W With lens, Long sensing range Side-view Ultra-small diameter Fiber Dimensions Model No. Narrow beam o0.125mm o0.25 o3 Sleeve part cannot be bent. 5 15 Narrow beam o0.25mm Sleeve part cannot be bent. o0.4 o3 5 15 o4 FT-S32 FT-S31W 25 R2 500 mm Bending durability R1 R10 2m Bending durability R1 7RXJK FT-E13 7RXJK FT-E23 7RXJK FT-V40 3 Fiber Bending cable radius length : (mm) Free-cut R2 Bending durability 1m R4 Bending durability 2m Sensing range (mm in) (Note 1) FX-500 series STD 90 3.543 HYPR 350 13.780 STD 315 12.402 HYPR 1,350 53.150 STD 260 10.236 HYPR 990 38.976 STD 3,100 122.047 HYPR (Note 2) 3,600 141.732 STD 800 31.496 HYPR 3,300 129.921 STD 15 0.591 HYPR 52 2.047 STD 75 2.953 HYPR 270 10.630 STD 3,500 137.795 HYPR (Note 2) 3,600 141.732 U-LG LONG FAST H-SP 210 8.268 160 6.299 60 2.362 19 0.748 770 30.315 550 21.654 210 8.268 70 2.756 590 23.228 440 17.323 150 5.906 53 2.087 3,600 141.732(Note 2) 3,600 141.732(Note 2) 1,800 70.866 600 23.622 1,900 74.803 1,400 55.118 490 19.291 160 6.299 30 1.181 24 0.945 8 0.315 2 0.079 160 6.299 125 4.921 42 1.654 13 0.512 3,600 141.732(Note 2) 3,600 141.732(Note 2) 2,400 94.488 850 33.465 FX-101 Beam (Upper value) axis dia. FX-102 (mm) (Lower value) 40 1.575 90 3.543 o0.25 Beam axis position/ Ambient Inclination Protection temp. of beam axis 150 m IP67 /2 130 5.118 340 13.386 -55 to +80 C o0.5 150 m /3 80 3.150 240 9.449 1,100 43.307 3,000 118.110 o2 260 10.236 720 28.346 o1 150 m /3 6 0.236 19 0.748 o0.125 22 0.866 o0.25 80 3.150 1,000 39.370 3,100 122.047 o2.5 -40 to +60 C IP40 -40 to +70 C -40 to +60 C IP67 -40 to +70 C IP50 -40 to +60 C Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The fiber cable length practically limits the sensing range. INDEX Earlier models comparison table 7RXJK : It is a fiber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180) and bendable (bending radius: R4 mm or less) features. 13 New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Reflective type o1*5 Type Shape of fiber head (mm) Model No. 7RXJK o1.5 FD-S21 10 7RXJK o3 FD-S32 15 o3 Cylindrical o3 FD-S32W 15 7RXJK o3 FD-S31 10 Coaxial o3 FD-S33GW o3 o1*5 Ultra-small diameter 15 o1.5 o0.48 15 3 o0.63 15 5 Sleeve part cannot be bent. FD-E23 Sensing range (mm in) (Note 1, 2) FX-101 U-LG (Upper value) LONG FX-500 series FX-102 FAST (Lower value) H-SP 130 5.118 110 4.331 37 1.457 11 0.433 Beam axis position/ Ambient Protection Inclination of temp. beam axis STD 80 3.150 HYPR 190 7.480 STD 420 16.535 HYPR 1,200 47.244 STD 270 10.630 HYPR 900 35.433 790 31.102 660 25.984 120 4.724 220 8.661 345 13.583 75 2.953 630 24.803 430 16.929 150 5.906 45 1.772 80 3.150 230 9.055 STD 125 4.921 HYPR 515 20.276 290 11.417 220 8.661 80 3.150 25 0.984 35 1.378 140 5.512 150 m /3 R1 STD 150 5.906 HYPR 670 26.378 340 13.386 280 11.024 90 3.543 25 0.984 45 1.772 140 5.512 29 1.142 25 0.984 7 0.276 2 0.079 5 0.197 15 0.591 R4 STD 12 0.472 HYPR 50 1.969 STD 55 2.165 HYPR 170 6.693 120 4.724 80 3.150 30 1.181 9 0.354 20 0.787 70 2.756 R2 Bending durability 1m R4 Bending durability R1 R2 2m Bending durability FD-E13 Sleeve part cannot be bent. o3 Fiber Bending cable radius length : (mm) Free-cut 1m 25 0.984 70 2.756 -55 to +80 C IP67 Chemicalresistant Heatresistant Vacuumresistant IP40 150 m /3 Retroreflective Type -40 to +60 C -55 to +80 C Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type -40 to +60 C Reflective Type Others IP40 -40 to +70 C Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The sensing range is specified for white non-glossy paper. Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 7RXJK : It is a fiber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180) and bendable (bending radius: R4 mm or less) features. 14 New product introduction Tough Fiber Sleeve It is suitable for sensing in narrow locations and sensing minute objects because the fiber tip is a thin sleeve. The 40 mm sleeve type can be bent in any direction. Fiber Selection Guide Choose by model FD-41S Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type FT-42S <Thru-beam type> FT-E13/FT-E23 Ultra-small diameter fiber Centering of 1/10 mm or less Ultra-small diameter fibers with a compact head ensure precision centering accuracy* to stably detect minute parts. A B C Cylindrical Type Dimensions UNCLEAR Sleeve Flat Type Small Spot Narrow Beam *Tolerance of A + Tolerance of B + Tolerance of C = 0.09 mm Dimensions unclear Screw Dimensions CLEAR Ex.) FT-E13 Dimensions unclear o3 mm+0.05 +0.002 o0.118 in 0 Previous general fiber New standard fiber Extra clearance needs to be added when designing and machining the mounting hole due to unclear dimensions. As a result, mounting variation increases and the beam axis deviates, resulting in a decrease in sensing accuracy or causing the sleeve to bend or break. Highly accurate design and machining are possible due to clear mounting hole dimensions. As a result, mounting variation is minimal, improving sensing accuracy. In addition to this, as the beam axis alignment is not affected when the fiber is changed, readjustment is not necessary. o0.5 mm+0.05 +0.002 o0.020 in 0 Screw Dimensions clear Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type Minute sensing only possible with ultra small fiber Detection of fine-pitch connector pins FT-E13 Detection of tiny chips Ultra-small diameter fiber with o0.125 mm o0.005 in beam axis is able to detect the insertion or bending of fine-pitch connector pins. Fiber can be installed with only the o0.25 mm o0.010 in sleeve close to the minute section. FT-E13 Retroreflective Type Reflective Type Others Amplifiers FX-500 series Stainless steel fittings are used for the fiber head of all models. Application Clearly conforms to RoHS Can be used for secondary battery Improved mounting strength FX-100 series INDEX Fiber options Fiber bender Earlier models comparison table *FB-1 The fiber bender bends the sleeve part of the fiber head at the proper radius. Note: Do not bend the sleeve part of any side-view type fiber or ultrasmall diameter head type fiber. 15 New product introduction Thru-beam type (one pair set) Shape of fiber head (mm) Type M3 FT-31S 10 Sleeve 40mm 7RXJK M4 M4 o1.48 Narrow beam o0.125mm o0.25 o3 7RXJK M3 o0.88 Ultra-small diameter Threaded Sleeve 40mm Model No. Sleeve part cannot be bent. FT-42S 12 FT-E13 7RXJK o0.4 o3 Sleeve part cannot be bent. FT-E23 5 15 o1 o2 7RXJK Cylindrical Side-view 1.1 o2 Sleeve part cannot be bent. FT-V23 20 15 o1 o2 7RXJK 1 Sleeve part cannot be bent. FT-V25 15 15 o1 o2 o2*5 FT-V24W 15 15 o1.5 o2.5 7RXJK 1.3 FT-V30 Sleeve part cannot be bent. 2m R4 Bending durability (Note 3) R2 Bending durability 1m R4 Bending durability R2 Bending durability 2m 1 Sleeve part cannot be bent. R2 Bending durability (Note 3) 7RXJK o3 5 15 Narrow beam o0.25mm Fiber Bending cable radius length : (mm) Free-cut 20 15 R1 R4 Bending durability Sensing range (mm in) (Note 1, 2) FX-101 U-LG (Upper value) LONG FX-500 series FX-102 FAST (Lower value) H-SP STD 315 12.402 HYPR 1,220 48.031 STD 1,130 44.488 HYPR (Note 2) 3,600 141.732 STD 15 0.591 HYPR 52 2.047 STD 75 2.953 HYPR 270 10.630 STD 450 17.717 HYPR 1,800 70.866 STD 240 9.449 HYPR 900 35.433 STD 110 4.331 HYPR 380 14.961 STD 680 26.772 HYPR 2,200 86.614 740 29.134 550 21.654 195 7.677 63 2.480 2,050 80.709 1,600 62.992 530 20.866 190 7.480 30 1.181 24 0.945 8 0.315 2 0.079 160 6.299 125 4.921 42 1.654 13 0.512 1,000 39.370 880 34.646 280 11.024 90 3.543 550 21.654 480 18.898 140 5.512 45 1.772 230 9.055 200 7.874 60 2.362 20 0.787 1,200 47.244 1,000 39.370 340 13.386 100 3.937 Beam Ambient axis dia. Protection temp. (mm) 130 5.118 340 13.386 o0.5 300 11.811 800 31.496 o1 -55 to +80 C M3 Ultra-small diameter Shape of fiber head (mm) M3 o0.8 7RXJK M4 Threaded M4 FD-41S o1.48 Sleeve 40 mm M4 FD-41SW o1.48 12 M6 Sleeve 40 mm o1*5 FD-61S o2.5 o1.5 o0.48 R4 1m 15 3 o3 R1 (Note 3) 2m Bending durability (Note 3) 1m Sleeve part cannot be bent. o3 7RXJK FD-V30 2 Sleeve part cannot be bent. 15 o3 15 o1.5 FD-V30W 2 R2 Bending durability R1 Sleeve part cannot be bent. o5 15 o5 7RXJK 20 o2 Sleeve part cannot be bent. 2.3 FD-V50 R4 Bending durability STD 50 1.969 HYPR 170 6.693 STD 125 4.921 HYPR 515 20.276 STD 80 3.150 HYPR 330 12.992 HYPR FD-E23 5 Small diameter 15 15 o3 o1.5 Viewing new models IP67 6 0.236 19 0.748 o0.125 22 0.866 80 3.150 o0.25 160 6.299 400 15.748 o0.75 -40 to +70 C Super Quality Cylindrical Type -55 to +80 C 95 3.740 260 10.236 o0.5 Fibers Threaded Type IP30 35 1.378 90 3.543 -40 to +60 C 180 7.087 480 18.898 -55 to +80 C o1.0 Sleeve Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Sensing range (mm in) (Note 1, 2) FX-101 U-LG (Upper value) Protection LONG FX-500 series FX-102 STD R4 R4 o0.63 15 R2 Bending durability (Note 3) FD-E13 Sleeve part cannot be bent. o3 Ultra-small diameter 7RXJK M6 15 Cylindrical Bending radius (mm) Fiber cable length : Free-cut Sleeve part cannot be bent. Sleeve 40 mm Side-view Model No. FD-EG30S 15 12 Choose by shape/ application Heatresistant Reflective type Sleeve 15 mm Fiber Selection Guide Choose by model Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The fiber cable length practically limits the sensing range. 3) Bending radius of sleeve part is R10 mm or more. Type Tough Fiber 2m 420 16.535 1,200 47.244 FAST (Lower value) H-SP 110 4.331 80 3.150 20 0.787 30 1.181 70 2.756 9 0.354 IP40 Vacuumresistant Ambient temp. -40 to +70 C 290 11.417 220 8.661 80 3.150 25 0.984 35 1.378 140 5.512 -55 to +80 C 180 7.087 140 5.512 45 1.772 12 0.472 15 0.591 60 2.362 -40 to +60 C IP67 790 31.102 660 25.984 130 5.118 220 8.661 360 14.173 75 2.953 -55 to +80 C 29 1.142 25 0.984 7 0.276 2 0.079 5 0.197 15 0.591 STD 55 2.165 HYPR 170 6.693 120 4.724 80 3.150 30 1.181 9 0.354 20 0.787 70 2.756 -40 to +70 C STD 65 2.559 HYPR 240 9.449 STD 20 0.787 HYPR 80 3.150 STD 120 4.724 HYPR 370 14.567 130 5.118 120 4.724 35 1.378 14 0.551 25 0.984 75 2.953 -55 to +80 C 40 1.575 30 1.181 10 0.394 2 0.079 6 0.236 20 0.787 220 8.661 210 8.268 75 2.953 25 0.984 40 1.575 100 3.937 STD 12 0.472 HYPR 50 1.969 -40 to +60 C IP40 IP30 -40 to +60 C -55 to +80 C Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The sensing range is specified for white non-glossy paper. 3) Bending radius of sleeve part is R10 mm R0.394 in or more. 7RXJK : It is a fiber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180) and bendable (bending radius: R4 mm or less) features. Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 16 New product introduction Tough Fiber Flat Type Since it has a thin, rectangular shape, it can be installed in narrow locations. It is also a fiber with good workability and can be mounted directly with screws. Fiber Selection Guide Choose by model FT-Z30H FT-Z30E FT-Z30 Choose by shape/ application Viewing new models Fibers Mounting with M2 or M3 screw The built-in fiber guide allows for multiple installation angles. We offer; FT-WZ4/Z20HBW, FD-WZ4/Z20HBW, 1 point mounting with M2 screw and FT-WZ7/Z40HBW, FD-WZ7/Z40HBW, 1 point mounting with M3 screw. FT/FD-WZHBW is equipped with a fiber guide feature. Front sensing and side sensing can be selected with one head. Super Quality Threaded Type Space-saving installation Cylindrical Type Sleeve Flat Type Top Sensing M2 screw FD-Z20HBW 10 mm 0.394 in 2 mm The metal sleeve ensures tightening strength 0.079 in Small Spot Side Sensing Boss Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Thru-beam type (one pair set) Chemicalresistant Heatresistant Vacuumresistant Type Liquid Leak / Liquid Detection Shape of fiber head (mm) Top sensing W3 x H8 x D12 Model No. 7RXJK FT-Z30H FT-Z30HW Side sensing W3 x H12 x D8 Fiber Dimensions FT-Z30EW Front sensing W8.5 x H12 x D3 7RXJK Flat FT-Z30 Front sensing Amplifiers Front sensing FX-500 series FX-100 series W8.5 x H12 x D3 (Note 2) R1 STD R2 Bending durability HYPR (Note 2) R1 STD HYPR W10 x H7 x D2 Bending durability With boss Front sensing W14 x H7 x D3.5 W3.5 x H14 x D11 HYPR (Note 2) FT-Z30W HYPR FT-WZ4 1m Fiber bending type W2 x H10 x D10 STD R2 STD FT-Z20HBW R1 FT-WZ7 2m Fiber bending type Earlier models comparison table STD (Note 2) Reflective Type INDEX FX-500 series FT-Z40HBW U-LG LONG FAST H-SP Beam FX-101 Ambient (Upper value) axis dia. Protection temp. (mm) FX-102 (Lower value) R2 Bending durability 2m Side sensing W3 x H12 x D8 Retroreflective Type Others 7RXJK FT-Z30E Thru-beam Type Sensing range (mm in) (Note 1) HYPR Top sensing W3 x H8 x D12 Fiber Options Fiber Bending cable radius length : (mm) Free-cut 3,500 137.795 3,600 141.732 3,500 137.795 3,600 141.732 3,400 133.858 3,600 141.732 2,100 82.677 3,600 141.732 1,500 59.055 (Note 2) 3,600 141.732 STD 530 20.866 HYPR (Note 2) 1,600 62.992 STD 260 10.236 HYPR 1,100 43.307 STD 1,400 55.118 HYPR 3,500 137.795 STD 800 31.496 HYPR 3,300 129.921 3,600 141.732(Note 2) 3,600 141.732(Note 2) 1,400 55.118 2,600 102.362 3,200 125.984 810 31.890 3,600 141.732(Note 2) 3,600 141.732(Note 2) 1,200 47.244 2,400 94.488 3,200 125.984 740 29.134 3,600 141.732(Note 2) 3,600 141.732(Note 2) 1,400 55.118 2,000 78.740 2,600 102.362 630 24.803 3,600 141.732(Note 2) 3,600 141.732(Note 2) 710 27.953 1,200 47.244 2,300 90.551 410 16.142 3,300 129.921 3,200 125.984 540 21.260 1,000 39.370 1,800 70.866 280 11.024 1,100 43.307 900 35.433 230 9.055 330 12.992 670 26.378 100 3.937 670 26.378 570 22.441 100 3.937 180 7.087 320 12.598 55 2.165 3,300 129.921 2,300 90.551 330 12.992 890 35.039 1,000 39.370 290 11.417 1,900 74.803 1,400 55.118 260 10.236 490 19.291 720 28.346 160 6.299 2x3 IP40 -40 to +60 C o2 o1.5 o0.5 IP67 o1.5 o1 IP67 Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The fiber cable length practically limits the sensing range. 7RXJK : It is a fiber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180) and bendable (bending radius: R4 mm or less) features. 17 New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Reflective type Type Shape of fiber head (mm) Model No. Bending radius (mm) Fiber cable length : Free-cut Front sensing FD-WZ4 W10 x H7 x D2 1m With boss Flat Fiber bending type FD-Z20HBW W2 x H10 x D10 R1 Front sensing FD-WZ7 W14 x H7 x D3.5 2m Fiber bending type FD-Z40HBW W3.5 x H14 x D11 Chemicalresistant Sensing range (mm in) (Note 1, 2) FX-101 FX-500 series Ambient U-LG (Upper value) Protection temp. LONG FX-102 FAST (Lower value) H-SP 1 to 110 0.039 to 4.331 2 to 20 1 to 85 0.039 to 3.346 0.079 to 0.787 3 to 35 0.118 to 1.378 1 to 70 5 to 13 0.197 to 0.512 0.039 to 2.756 STD 2 to 65 0.079 to 2.559 HYPR 1 to 230 0.039 to 9.055 1 to 210 0.039 to 8.268 STD 2 to 30 2 to 85 0.079 to 3.346 1 to 180 0.039 to 7.087 0.079 to 1.181 2 to 55 0.079 to 2.165 1 to 90 HYPR 1 to 340 0.039 to 13.386 3 to 15 0.118 to 0.591 0.039 to 3.543 230 9.055 STD 1 to 55 110 4.331 180 7.087 0.039 to 2.165 1.5 to 65 0.059 to 2.559 160 HYPR 3 to 25 0.118 to 0.984 6.299 430 16.929 IP67 540 21.260 STD 1 to 90 260 10.236 470 18.504 0.039 to 3.543 1 to 160 0.039 to 6.299 0.5 to 240 HYPR 2 to 50 0.079 to 1.969 0.020 to 9.449 760 29.921 IP67 Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The sensing range is specified for white non-glossy paper. Vacuumresistant Liquid Leak / Liquid Detection Fiber Options -40 to +60 C Heatresistant Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 18 New product introduction Tough Fiber Fiber Selection Guide Choose by model Small Spot Sensing of minute objects can be performed by combining the fiber and spot lens. The spot diameter can also be changed. Choose by shape/ application Viewing new models Applications Packing detection Fibers Number of IC pins checking FD-42G/42GW FD-EG31 Super Quality FX-MR6 (lens) + FD-EG31 (fiber) IC FX-MR5 Threaded Type Discrimination of 0603 chip direction FX-MR3 Cylindrical Type Sleeve Flat Type Small Spot Narrow Beam Wide Beam Because it's a side-view type, it can be mounted even in narrow spaces. Small spot fiber lineup (High precision fiber & Spot lens) Shape of head (mm) Designation Convergent Reflective Type 16 Retroreflective Type Heatresistant Lens Distance to focal point Ambient (mm in) (Note) Model No. temp. 70.5 0.2760.020 FX-MR6 -20 to +60 C FD-32GX 15 2m R2 1m Others 7.50.5 0.2950.020 FX-MR3 -40 to +70 C -20 to +60 C R2 FD-42G 7RXJK Bending durability 2m FD-32GX Pinpoint spot lens 20.2 27.1 Zoom lens Zoom lens (Side-view type) o4 o7.1 o0.5 o0.020 61 0.2360.039 FX-MR1 o0.7 to o2.0 Approx.18.5 to 43 o0.028 to o0.079 Approx. 0.728 to 1.693 FX-MR2 o0.5 to o3.0 Approx.13 to 30 o0.020 to o0.118 Approx. 0.512 to 1.181 FX-MR5 -40 to +70 C -40 to +70 C -40 to +70 C 1m R1 FD-42GW 7RXJK FD-42GW FD-42G FD-42GW -55 to +80 C -40 to +60 C R2 2m -55 to +80 C R2 R2 FD-42G 7RXJK W6.3 x H20.3 x D10.3 Bending durability 7RXJK FD-42G R1 -40 to +70 C R2 FD-32G FX-500 series FX-100 series R4 IP40 7RXJK FD-42GW o0.5 o0.020 Amplifiers R2 FD-EG30 o0.3 o0.012 Reflective Type -55 to +80 C Bending durability 500 mm Retroreflective Type -40 to +60 C R1 FD-EG31 o0.15 o0.006 o4 -55 to +80 C Bending durability FD-32G Thru-beam Type Earlier models comparison table R2 FD-42G 7RXJK Fiber Options INDEX -40 to +70 C 7RXJK FD-42GW o0.4 o0.016 Finest spot lens R4 FD-EG30 Liquid Leak / Liquid Detection Fiber Dimensions -20 to +60 C 500 mm o0.2 o0.008 Vacuumresistant Model No. Applicable fibers Fiber cable Bending Ambient length radius Protection temp. : Free-cut (mm) FD-EG31 o0.1 o0.004 o4 Chemicalresistant Spot diameter (mm in) (Note) R1 R2 R1 -55 to +80 C -40 to +60 C -55 to +80 C -40 to +60 C -55 to +80 C -40 to +60 C Note: Spot diameter and distance to focal point are specified for FX-500/FX-100 series. 7RXJK : It is a fiber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180) and bendable (bending radius: R4 mm or less) features. 19 Narrow Beam New product introduction Tough Fiber Since the beam is narrow, it has a feature by which it is not easily affected by surrounding obstacles even in long distances. Fiber Selection Guide Aperture angle 3 Choose by model Choose by shape/ application Applications Viewing new models FR-KZ50H Fibers FR-KZ22E Super Quality FT-KV40 Thru-beam type (one pair set) Type Shape of fiber head (mm) o3.5 o3.7 Model No. Narrow beam 20 o4 3 STD 7RXJK FT-KS40 7RXJK FT-KV40 R2 Bending durability 25 2m o4 3 FT-KV40W 2 R1 25 1.5 x 2 7RXJK FT-KV26 20 Sensing range (mm in) (Note 1) FX-101 Beam U-LG (Upper value) axis dia. LONG FX-500 series FX-102 (mm) FAST (Lower value) H-SP Fiber Bending cable radius length : (mm) Free-cut R2 Bending durability 3,600 141.732(Note 2) 3,600 141.732 3,600 141.732(Note 2) 2,200 86.614 3,600 141.732 3,600 141.732(Note 2) HYPR (Note 2) (Note 2) 3,600 141.732 1,200 47.244 STD 3,600 141.732(Note 2) (Note 2) 3,600 141.732 3,600 141.732(Note 2) 3,600 141.732(Note 2) HYPR (Note 2) 3,600 141.732 1,200 47.244 2,200 86.614 3,600 141.732 STD 3,600 141.732(Note 2) (Note 2) (Note 2) 3,600 141.732 3,600 141.732(Note 2) 3,100 122.047 HYPR (Note 2) 3,600 141.732 940 37.008 STD 1,600 62.992 710 27.953 1,200 47.244 135 5.315 440 17.323 560 22.047 HYPR 160 6.299 2,500 98.425 (Note 2) filters Side sensing Top sensing With Wafer mapping polarizing Narrow beam Shape of fiber head (mm) Model No. W5.2 x H9.5 x D16 FR-Z50HW Bending Fiber cable length radius : Free-cut (mm) R1 Long range IP40 W30 x H30 x D0.5 o2.5 -40 to +60 C 0.8 IP30 o1 7RXJK FR-KZ50H W10.6 x H28 x D10.1 W9.5 x H25 x D5.2 Convergent Reflective Type Chemicalresistant X1 Z0.5 Heatresistant Liquid Leak / Liquid Detection Sensing range (mm in) (Note 1, 3) U-LG LONG FAST H-SP STD 100 to 1,400 3.937 to 55.118 100 to 990 3.937 to 38.976 100 to 1,200 3.937 to 47.244 100 to 780 3.937 to 30.709 HYPR 100 to 1,900 3.937 to 74.803 100 to 490 3.937 to 19.291 FX-500 series FX-101 Ambient (Upper value) Protection temp. FX-102 (Lower value) 100 to 550 3.937 to 21.654 IP40 100 to 830 3.937 to 32.677 Fiber Dimensions R2 Thru-beam Type Retroreflective Type 2m IP30 Bending durability -40 to +60 C STD 20 to 800 0.787 to 31.496 20 to 200 20 to 300 0.787 to 11.811 20 to 400 0.787 to 15.748 0.787 to 7.874 20 to 200 0.787 to 7.874 20 to 350 HYPR 20 to 1,000 0.787 to 39.370 20 to 200 0.787 to 7.874 0.787 to 13.780 7RXJK FR-KZ50E Fiber Options -25 to +55 C Reflective Type Others Amplifiers W28 x H10.6 x D10.1 Shape of fiber head (mm) Wide Beam Retroreflective Type 15 to 460 0.591 to 18.110 15 to 200 15 to 310 0.591 to 12.205 15 to 410 0.591 to 16.142 0.591 to 7.874 15 to 220 0.591 to 8.661 15 to 360 HYPR 15 to 570 0.591 to 22.441 15 to 100 0.591 to 3.937 0.591 to 14.173 FR-KZ22E W4 x H2 x D21.5 Sleeve Flat Type Narrow Beam STD 7RXJK W5.2 x H9.5 x D21 Cylindrical Type Small Spot W7.5 x H2.2 x D11.2 FX-500 series Reflective type Type Threaded Type Vacuumresistant Retroreflective type Type o2.2 Beam axis position/ Ambient Inclination Protection temp. of beam axis Model No. Bending Fiber cable length radius : Free-cut (mm) W5.2 x H9.5 x D16 FD-Z50HW R1 2m FX-100 series Sensing range (mm in) (Note 1) FX-101 Ambient U-LG (Upper value) Protection temp. LONG FX-102 FAST (Lower value) H-SP STD 10 to 1,100 0.394 to 43.307 10 to 200 10 to 650 0.394 to 25.591 10 to 1,000 0.394 to 39.370 0.394 to 7.874 -40 to 10 to 410 0.394 to 16.142 10 to 530 IP40 +60 C HYPR 15 to 130 0.591 to 5.118 0.394 to 20.866 10 to 2,500 0.394 to 98.425 FX-500 series Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The fiber cable length practically limits the sensing range. 3) The sensing range is the possible setting range for the attached reflector. The fiber can detect an object less than setting range for the reflector. Refer to P.22 for the sensing range when FR-Z50HW is used in combination with a reflector (optional). 7RXJK : It is a fiber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180) and bendable (bending radius: R4 mm or less) features. INDEX Earlier models comparison table 20 New product introduction Tough Fiber Fiber Selection Guide Choose by model Wide Beam Senses work with indefinite shape or position in the beam band without missing. It can also be used to determine shape. FT-A11 Choose by shape/ application Viewing new models Applications Sensing tiny moving objects Inspecting screw height Control the amount of meandering Confirming presence of slit mask FD-A16 Spot size 2 x 15mm (by a distance of 15mm) FT-A11 Fibers Super Quality FT-A32 Threaded Type Cylindrical Type Type : With slit mask Sleeve Flat Type Type : Without slit mask Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Thru-beam type (one pair set) Type Shape of fiber head (mm) Chemicalresistant Heatresistant Sensing width 32mm Vacuumresistant W5 x H69 x D20 Fiber Options Others FT-A32 Bending durability (Note 2) R1 Array W5 x H15 x D15 (Note 2) HYPR (Note 2) 7RXJK FT-A11 FT-A11W R2 Bending durability R1 W4.2 x H31 x D13.5 Sensing width 5.5mm (Note 2) HYPR STD FT-A32W 7RXJK FT-AL05 R2 Bending durability 2m STD Type Shape of fiber head (mm) Array Wide beam FX-100 series Earlier models comparison table 3,600 141.732 3,600 141.732 3,600 141.732 Beam Ambient axis dia. Protection temp. (mm) 3,600 141.732(Note 2) 3,600 141.732(Note 2) 3,600 141.732(Note 2) 2,100 82.677 3,600 141.732 -40 to +60 C (Note 2) 3,600 141.732(Note 2) 3,600 141.732(Note 2) 3,600 141.732(Note 2) 3,000 118.110 3,600 141.732(Note 2) 3,600 141.732(Note 2) 3,600 141.732(Note 2) HYPR (Note 2) 3,600 141.732 1,100 43.307 STD 3,600 141.732(Note 2) (Note 2) 3,600 141.732 3,600 141.732(Note 2) 3,600 141.732(Note 2) HYPR (Note 2) 3,600 141.732 1,300 51.181 STD 1,550 61.024 860 33.858 1,500 59.055 500 19.685 HYPR 170 6.693 2,300 90.551 (Note 2) Reflective type INDEX 3,600 141.732 FX-101 (Upper value) FX-102 (Lower value) 3,600 141.732 3,600 141.732 3.2 x 32 (Note 2) -40 to +55 C IP40 1,900 74.803 3,600 141.732 -40 to +70 C (Note 2) 2.2 x 11 -40 to +55 C 1,700 66.929 3,400 133.858 250 9.843 660 25.984 0.25 x 5.5 -55 to +80 C Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The fiber cable length practically limits the sensing range to 3,600 mm 141.72 in long. Amplifiers FX-500 series U-LG LONG FAST H-SP FX-500 series STD R2 W5 x H69 x D20 W4.2 x H31 x D13.5 Allows flexible wiring Sensing width 11mm Thru-beam Type Reflective Type Sensing width 32mm Sensing width 11mm Fiber Dimensions Retroreflective Type 7RXJK Allows flexible wiring Wide beam Liquid Leak / Liquid Detection Model No. Sensing range (mm in) (Note 1) Fiber Bending cable radius length : (mm) Free-cut Model No. 7RXJK FD-A16 W7 x H15 x D30 7RXJK FD-AL11 W5 x H20 x D20 Bending Fiber cable length radius : Free-cut (mm) R4 Bending durability R2 Bending durability 2m Sensing range (mm in) (Note 1, 2) FX-101 Ambient U-LG (Upper value) Protection temp. LONG FX-500 series FX-102 FAST (Lower value) H-SP STD 200 7.874 HYPR Cannot use STD 320 12.598 HYPR 670 26.378 200 7.874 200 7.874 140 5.512 75 2.953 120 4.724 240 9.449 530 20.866 510 20.079 180 7.087 50 1.969 100 3.937 285 11.220 -40 to +60 C IP40 -55 to +80 C Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The sensing range is specified for white non-glossy paper. 7RXJK : It is a fiber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180) and bendable (bending radius: R4 mm or less) features. 21 Convergent Reflective Type New product introduction Tough Fiber It is a fiber in which the sensing distance is limited to a specific range so it is not easily affected by the background. It is effective when work has accumulated or when the background is near. Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Applications Detecting glass substrate Substrate conveyors Mounting in handring arms Fibers Mapping fiber FD-L32H Seating FD-L12W Super Quality confirmation fiber FD-L11 FD-L30A Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Alignment fiber FD-L22A/L30A/L31A Reflective type Type Shape of fiber head (mm) Model No. Mapping FD-L32H W25 x H7.3 x D30 7RXJK Alignment FD-L30A W20 x H29 x D3.8 Alignment 7RXJK FD-L31A Glass substrate detection W23.5 x H29 x D4.5 Alignment Bending radius (mm) Fiber cable length : Free-cut Bending durability 4m Bending durability R4 W17 x H29 x D3.8 Seating confirmation 7RXJK FD-L23 3m W12 x H19 x D3 Seating confirmation 7RXJK FD-L10 FD-L21 W24 x H21 x D4 FD-L21W Ultlasmall General purpose W24 x H21 x D4 7RXJK W7.2 x H7.5 x D2 0 to 43 0 to 1.693 STD R2 2m Bending durability STD 3m Bending durability R2 Bending durability 2m R1 R2 Bending durability FD-L12W R1 0 to 29 0 to 1.142 HYPR 0 to 30 0 to 1.181 STD 0 to 9.5 0 to 0.374 HYPR 0 to 11.5 0 to 0.453 STD 0 to 5 0 to 0.197 HYPR 0 to 6 0 to 0.236 R4 FD-L20H W6 x H18 x D14 0 to 43 0 to 1.693 STD 0 to 24 0 to 0.945 HYPR 0 to 31 0 to 1.220 W12 x H19 x D3 7RXJK 0 to 110 0 to 4.331 4 to 33 0.157 to 1.299 HYPR 3 to 35 0.118 to 1.378 7RXJK FD-L11 0 to 56 0 to 2.205 Bending durability W18 x H29 x D3.8 Seating confirmation HYPR HYPR 7RXJK FD-L22A FX-500 series STD R2 1m Wide Beam Sensing range (mm in) (Note 1, 2) STD R4 Narrow Beam STD 1.5 to 16 0.059 to 0.630 HYPR 1 to 19 0.039 to 0.748 STD 3 to 14 0.118 to 0.551 HYPR 1.5 to 15 0.059 to 0.591 STD 23 0.906 HYPR 45 1.772 STD 8 0.315 HYPR 14 0.551 U-LG LONG FAST H-SP FX-101 Ambient (Upper value) Protection temp. FX-102 (Lower value) 0 to 87 0 to 3.425 16 to 30 0 to 74 0 to 2.913 0.630 to 1.181 1 to 38 0.039 to 1.496 0 to 50 Cannot use 0 to 1.969 0 to 43 0 to 1.693 0 to 43 0 to 1.693 0 to 42 0 to 1.654 0 to 29 0 to 1.142 -40 to +60 C 0 to 30 0 to 1.181 0 to 30 0 to 1.181 0 to 28 0 to 1.102 1.5 to 24 0.059 to 0.945 0 to 28 0 to 1.102 0 to 30 0 to 1.181 0 to 10.5 0 to 0.413 0 to 10 0 to 0.394 0 to 9 0 to 0.354 0 to 8 0 to 0.315 0 to 8 0 to 0.315 0 to 9 0 to 0.354 0 to 5.5 0 to 0.217 0 to 5.5 0 to 0.217 0 to 4.5 0 to 0.177 0 to 4 0 to 0.157 0 to 4.5 0 to 0.177 0 to 5.5 0 to 0.217 Chemicalresistant Heatresistant Liquid Leak / Liquid Detection 4 to 33 0.157 to 1.299 5 to 30 4 to 33 0.157 to 1.299 0.197 to 1.181 4 to 32 0.157 to 1.260 4 to 33 5 to 25 0.197 to 0.984 0.157 to 1.299 0 to 19 0 to 0.748 0 to 25 0 to 0.984 Retroreflective Type Vacuumresistant 0 to 40 0 to 1.575 0 to 50 0 to 1.969 0 to 28 0 to 1.102 0 to 27 0 to 1.063 0 to 24 0 to 0.945 0 to 18 0 to 0.709 Convergent Reflective Type 0 to +70 C -20 to +70 C IP40 1 to 18 0.039 to 0.709 3 to 15 1 to 18 0.039 to 0.709 0.118 to 0.591 2 to 15 0.079 to 0.591 1.5 to 16 3 to 12 0.118 to 0.472 0.059 to 0.630 Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others -40 to +60 C Amplifiers FX-500 series 2 to 15 0.079 to 0.591 7 to 12 2 to 15 0.079 to 0.591 0.276 to 0.472 4 to 14 0.157 to 0.551 3 to 14 6.5 to 10 0.256 to 0.394 0.118 to 0.551 FX-100 series 35 1.378 5 to 15 32 1.260 0.197 to 0.591 2 to 15 0.079 to 0.591 1 to 30 5 to 9 0.197 to 0.354 0.039 to 1.181 -40 to +70 C 12.5 0.492 1 to 4.5 12 0.472 0.039 to 0.177 IP30 0.5 to 7 0.020 to 0.276 0.5 to 7 0.5 to 4 0.020 to 0.157 0.020 to 0.276 -40 to +60 C Notes: 1) The sensing range is specified for transparent glass 100 x 100 x t0.7 mm 3.937 x 3.937 x t0.028 in (FD-L32H: R edge, FD-L21 and FD-L21W: t2 mm t0.079 in) (FD-L20H: white non-glossy paper, FD-L10: silicon wafers 100 x 100 mm 3.937 x 3.937 in). 2) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 7RXJK : It is a fiber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180) and bendable (bending radius: R4 mm or less) features. INDEX Earlier models comparison table 22 New product introduction Tough Fiber Retroreflective Type Compared with the thru-beam type, it is easier to rotate the fibers since one side is a reflector. Sensing transparent objects is also its advantage. Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Applications Detecting transparent film Detecting wafer Detection of transparent seals on transparent sheet FR-KZ50E Fibers FR-Z50HW Super Quality Threaded Type Cylindrical Type FR-KZ22E Reflector RF-003 (Accessory for FR-KZ50E) Sleeve Flat Type Small Spot Narrow Beam Retroreflective type Wide Beam Convergent Reflective Type Type Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX filters With Model No. W5.2 x H9.5 x D16 FR-Z50HW Bending Fiber cable length radius : Free-cut (mm) R1 W30 x H30 x D0.5 Sensing range (mm in) (Note 1, 2) U-LG LONG FAST H-SP STD 100 to 1,400 3.937 to 55.118 100 to 990 3.937 to 38.976 100 to 1,200 3.937 to 47.244 100 to 780 3.937 to 30.709 HYPR 100 to 1,900 3.937 to 74.803 100 to 490 3.937 to 19.291 FX-500 series FX-101 Ambient (Upper value) Protection temp. FX-102 (Lower value) 100 to 550 3.937 to 21.654 100 to 830 IP40 3.937 to 32.677 -25 to +55 C W7.5 x H2.2 x D11.2 STD 7RXJK 15 to 310 0.591 to 12.205 HYPR 15 to 570 0.591 to 22.441 FR-KZ22E W4 x H2 x D21.5 W5.2 x H9.5 x D21 R2 7RXJK FR-KZ50H W10.6 x H28 x D10.1 W9.5 x H25 x D5.2 15 to 460 0.591 to 18.110 15 to 200 15 to 410 0.591 to 16.142 0.591 to 7.874 15 to 220 0.591 to 8.661 15 to 360 15 to 100 0.591 to 3.937 0.591 to 14.173 2m Bending durability IP30 STD 20 to 300 0.787 to 11.811 HYPR 20 to 1,000 0.787 to 39.370 7RXJK FR-KZ50E -40 to +60 C 20 to 800 0.787 to 31.496 20 to 200 20 to 400 0.787 to 15.748 0.787 to 7.874 20 to 200 0.787 to 7.874 20 to 350 20 to 200 0.787 to 7.874 0.787 to 13.780 W28 x H10.6 x D10.1 Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The sensing range is the possible setting range for the attached reflector. The fiber can detect an object less than setting range for the reflector. Sensing range when FR-Z50HW is used in combination with a reflector (optional) Reflector model No. RF-230 RF-220 RF-210 HYPR U-LG 100 to 19,000 3.937 to 748.030 100 to 8,000 3.937 to 314.960 100 to 5,500 3.937 to 216.535 100 to 8,000 3.937 to 314.960 100 to 4,700 3.937 to 185.039 100 to 2,700 3.937 to 106.299 Sensing range (mm in) FX-500 series LONG STD FAST 100 to 5,000 3.937 to 196.850 100 to 3,500 3.937 to 137.795 100 to 2,400 3.937 to 94.488 100 to 3,600 3.937 to 141.732 100 to 3,000 3.937 to 118.110 100 to 1,500 3.937 to 59.055 100 to 2,900 3.937 to 114.173 100 to 1,800 3.937 to 70.866 100 to 1,200 3.937 to 47.244 H-SP 100 to 1,400 3.937 to 55.118 100 to 830 3.937 to 32.677 100 to 530 3.937 to 20.866 FX-101 100 to 2,400 3.937 to 94.488 100 to 1,300 3.937 to 51.181 100 to 980 3.937 to 38.583 FX-102 100 to 5,000 3.937 to 196.850 100 to 2,600 3.937 to 102.362 100 to 1,300 3.937 to 51.181 Note: The sensing range of retroreflective type is the possible setting range for the attached reflector. The fiber can detect an object less than 100 mm. However, note that if there are any white or highly-reflective surfaces near the fiber head, reflected incident light may affect the fiber head. If this occurs, adjust the threshold value of the amplifier unit before use. Fiber option Reflector (for FR-Z50HW) P.33 Earlier models comparison table Narrow beam Heatresistant Side sensing Top sensing Chemicalresistant Wafer mapping polarizing Retroreflective Type Shape of fiber head (mm) 7RXJK : It is a fiber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180) and bendable (bending radius: R4 mm or less) features. 23 Chemical-resistant New product introduction Tough Fiber With the case and fiber sheath made of PFA, the fiber can be used with various types of chemical liquids. Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Applications Detecting wafer cassette in cleaning tank Sensing wafer in corrosive environment Fibers Cleaning tank Super Quality Wafer cassette Threaded Type FT-L80Y FT-Z802Y Cylindrical Type Sleeve Flat Type Small Spot Wafer Narrow Beam Wide Beam Chemical filler Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant FT-Z802Y Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Thru-beam type (one pair set) Type Shape of fiber head (mm) Model No. Fiber Bending cable radius length : (mm) Free-cut Easy mounting * Rectangular head SEMI S2 compliant W7 x H15 x D13 Sensing range (mm in) (Note 1) FX-500 series STD FT-Z802Y R25 2m 3,100 122.047 HYPR (Note 2) 3,600 141.732 (Note 2) 3,600 141.732 U-LG LONG FAST H-SP Beam FX-101 Ambient (Upper value) axis dia. Protection temp. (mm) FX-102 (Lower value) Chemical-resistant STD FT-HL80Y HYPR (25) (Note 2) o5.5 FT-L80Y (25) Side-view o5.5 (25) R30 STD (Note 2) 3,600 141.732 2m HYPR (Note 3) (Note 2) 3,600 141.732 STD FT-V80Y 3,600 141.732 HYPR 1,300 51.181 (Note 2) 3,600 141.732 3,600 141.732(Note 2) 3,600 141.732(Note 2) 2,300 90.551 740 29.134 990 38.976 2,340 92.126 IP67 0 to +60 C -40 to +115 C o3.7 Retroreflective Type Others Amplifiers FX-500 series FX-100 series 3,600 141.732(Note 2) 3,600 141.732(Note 2) 1,100 43.307 2,800 110.236 2,600 102.362 920 36.220 2,800 110.236 2,200 86.614 800 31.496 240 9.449 Thru-beam Type Reflective Type 3,600 141.732(Note 2) 3,600 141.732(Note 2) 520 20.472 1,900 74.803 3,100 122.047 470 18.504 Heat-resistant 115 C o5.5 Fiber Dimensions 340 13.386 800 31.496 Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The fiber cable length practically limits the sensing range. 3) The allowable cutting range is 500 mm 19.685 in from the end that the amplifier inserted. IP67g -40 to +70 C o2.8 INDEX Earlier models comparison table 24 New product introduction Tough Fiber Fiber Selection Guide Choose by model Heat-resistant It can be used under environments of -60 to +350 C -76 to +662 F. A wide joint type for workability is also prepared. Choose by shape/ application Viewing new models Fibers Applications IC detection within a high temperature handler Detecting glass substrates FT-H20W-M1 Super Quality Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Thru-beam type (one pair set) HeatShape of fiber head Type resistant (mm) temp. Lens mountable (FX-LE1/LE2/SV1) Heatresistant Vacuumresistant M4 Heat-resistant o2.1 Fiber Dimensions Thru-beam Type Retroreflective Type 27 Allows flexible wiring Lens mountable (FX-LE1/LE2/SV1) 200 C 130 C M4 M4 23 Lens mountable (FX-LE2 only) M4 INDEX Earlier models comparison table M4 FT-H20W-M1 R10 FT-H20-M1 R25 FT-H13-FM2 FT-H20-J30-S (Note 5) FT-H20-J50-S (Note 5) 200 C Side-view o3.8 24 o4 Sensing range (mm in) (Note 1) FX-101 Beam Ambient U-LG (Upper value) axis dia. temp. LONG FX-500 series FX-102 (mm) FAST (Lower value) H-SP STD 430 16.929 HYPR 1,200 47.244 880 34.646 670 26.378 170 6.693 250 9.843 490 19.291 80 3.150 o1.2 -60 to +350 C R10 2m FT-H20-J20-S (Note 5) 23 2m 1m Lens mountable (FX-LE1/LE2/SV1) Heat-resistant (joint) FX-100 series Fiber R25 Sleeve 23 Lens mountable (FX-LE1/LE2/SV1) Others FX-500 series FT-H35-M2S6 R25 16 Reflective Type Amplifiers FT-H35-M2 30 350 C Sleeve Sleeve 60 60 mm mm Liquid Leak / Liquid Detection Fiber Options M4 Model No. Bending Fiber cable radius length (mm) : Free-cut FT-H20-VJ50-S (Note 5) FT-H20-VJ80-S (Note 5) STD 1,000 39.370 470 18.504 840 33.071 300 11.811 HYPR (Note 2) 1,600 62.992 90 3.543 100 3.937 300 11.811 STD 1,300 51.181 540 21.260 960 37.795 210 8.268 330 12.992 540 21.260 HYPR (Note 2) 1,600 62.992 110 4.331 STD 1,900 74.803 700 27.559 1,300 51.181 250 9.843 410 16.142 700 27.559 HYPR 140 5.512 3,300 129.921 o0.8 -60 to +200 C o1.2 o1.5 -60 to +130 C o1.2 -60 to +200 C 200 mm (Note 3) Heatresistant side R18 (Note 4) 300 mm (Note 3) STD 1,000 39.370 470 18.504 790 31.102 135 5.315 300 11.811 420 16.535 HYPR 90 3.543 1,600 62.992 500 mm (Note 3) STD 800 mm (Note 3) 600 23.622 HYPR 2,100 82.677 1,300 51.181 980 38.583 150 5.906 390 15.354 500 19.685 120 4.724 Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The fiber cable length practically limits the sensing range. 3) Fiber length (fixed-length) for heat-resistant fiber side. Fiber length for ordinary temperature side is 2 m 6.562 ft (free-cut). 4) R25 mm R0.984 in or more for ordinary temperature side. 5) Heat-resistant side fiber + ordinary temperature fiber (FT-FM2) are sold together as a set. 25 Heat-resistant joint fiber set contents Heat-resistant side (-60 to +200 C -76 to +392 F) * Ordinary temperature (-40 to +70 C -40 to +158 F) New product introduction Tough Fiber Ordinary temperature side 100 mm 3.937 in approx. Amplifiers Fiber Selection Guide Choose by model Heat-resistant side fiber Choose by shape/ application Ordinary temperature side fiber (FT-FM2) Nut (resin) Nut (metal), Use when securing to a mounting bracket. Viewing new models Model No. when ordering individual parts from spare parts * Heat-resistant side fiber one pair set FT-H20-J20, FT-H20-J30, FT-H20-J50, FT-H20-VJ50, FT-H20-VJ80 Fibers * Ordinary temperature side fiber one pair set FT-FM2 Threaded Type Cylindrical Type Reflective type Heat- Type resistant temp. Shape of fiber head (mm) Super Quality Sleeve Model No. Bending Fiber cable radius length : Free-cut (mm) Sensing range (mm in) (Note 1, 2) FX-101 Ambient U-LG (Upper value) temp. LONG FX-500 series FX-102 FAST (Lower value) H-SP Coaxial M6 FD-H35-M2 R25 25 2m Sleeve 60 mm o2.8 M6 350 C FD-H35-M2S6 22 Sleeve 90 mm Threaded M4 27 R10 Coaxial M6 200 C Heat-resistant o2.1 FD-H35-20S Fiber R25 Sleeve 1m FD-H20-M1 28 Coaxial M4 FD-H20-21 27 130 C FD-H13-FM2 Glass substrate detection convergent reflective FD-H30-L32 300 C R25 W21 x H33.2 x D5 120 4.724 300 11.811 500 19.685 380 14.961 130 5.118 45 1.772 90 3.543 280 11.024 640 25.197 600 23.622 200 7.874 65 2.559 100 3.937 -60 to 280 11.024 +130 C 2m W21 x H34.5 x D5 3m FD-H25-L45 FD-H18-L31 180 C W19 x H27 x D5 2m STD 1.5 to 26 0.059 to 1.024 HYPR 1 to 31 0.039 to 1.220 STD 5 to 42 0.197 to 1.654 HYPR 4 to 43.5 0.157 to 1.713 STD 16 0.630 HYPR 60 2.362 Liquid Leak / Liquid Detection -60 to +200 C 1 to 30 0.039 to 1.181 4 to 16 1 to 28 0.039 to 1.102 0.157 to 0.630 -20 to 1.5 to 24 0.059 to 0.945 4 to 23 +250 C 2 to 18 0.079 to 0.709 0.157 to 0.906 Ordinary 4 to 43 0.157 to 1.693 7 to 35 temp. side: 4.5 to 43 0.177 to 1.693 0.276 to 1.378 -20 to 5 to 40 0.197 to 1.575 7 to 38 +70 C 6.5 to 34 0.256 to 1.339 0.276 to 1.496 0 to 10 0 to 0.394 -60 to 0 to 25 +180 C 0 to 0.984 Notes: 1) The sensing range of reflective type is the value for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in glass substrate for FD-H30-L32, FD-H18-L31, transparent glass 100 x 100 x t0.7 mm 3.937 x 3.937 x t0.028 in for FD-H25-L43 and FD-H25-L45). 2) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. Chemicalresistant Vacuumresistant 30 1.181 2 to 9 25 0.984 0.079 to 0.354 -60 to 12 0.472 0 to 17 +300 C 0 to 0.669 1.5 to 6 0.059 to 0.236 32 1.260 24 0.945 13 0.512 2 to 6.5 0.079 to 0.256 Retroreflective Type Heatresistant 550 21.654 500 19.685 200 7.874 55 2.165 STD 17 0.669 HYPR 40 1.575 FD-H25-L43 -60 to +350 C STD 2m Narrow Beam Convergent Reflective Type 75 2.953 280 11.024 85 3.346 200 7.874 330 12.992 HYPR 840 33.071 STD 230 9.055 HYPR 770 30.315 Small Spot Wide Beam 550 21.654 440 17.323 140 5.512 45 1.772 350 13.780 HYPR 880 34.646 W19 x H27 x D5 540 21.260 460 18.110 150 5.906 45 1.772 STD 260 10.236 HYPR 840 33.071 STD M6 21 250 C STD 260 10.236 HYPR 720 28.346 Flat Type Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Fiber options Lens (For thru-beam fiber) P.30~ Earlier models comparison table 26 New product introduction Tough Fiber Vacuum-resistant Usable in high-temperatures of 300 C 572 F vacuum The leakage of FV-BR1 is still less than a very slight 1.33 x 10-10 Pa * m3/s [He], so that it can be used in vacuums with confidence. Fiber Selection Guide Choose by model Choose by shape/ application Highly resistant to repeated bending Applications Detection of glass substrate in vacuum chamber Super Quality FD-H30-KZ1V-S FD-H30-L32V-S Viewing new models Fibers FT-H30-M1V-S Vacuum resistant long range reflective fiber Vacuum resistant convergent reflective fiber FD-H30-KZ1V-S FD-H30-L32V-S Vacuum resistant expansion lens Threaded Type Because it has a bending durability of over 100,000 times (R20 mm R0.79 in), it is highly resistant to repeated bending and is optimal for mounting on moving robot hand. FV-LE1 Cylindrical Type Vacuum resistant thru-beam fiber FT-H30-M1V-S Sleeve Flat Type Small Spot Narrow Beam Vacuum resistant thru-beam fiber Wide Beam FT-H30-M1V-S Convergent Reflective Type Vacuum resistant side-view lens FV-SV2 Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant Thru-beam type (one pair set) Liquid Leak / Liquid Detection Thru-beam Type FX-100 series INDEX Earlier models comparison table Type Vacuum-resistant FX-500 series 300 C Lens mountable (FV-LE1/SV2) M4 30 Model No. FT-H30-M1V-S (Note) R18 1m FX-500 series STD 270 10.630 HYPR 1,000 39.370 Reflective type Reflective Type Amplifiers Shape of fiber head (mm) Sensing range (mm in) FX-101 (Upper value) FX-102 (Lower value) U-LG LONG FAST H-SP 590 23.228 470 18.504 160 6.299 55 2.165 110 4.331 280 11.024 Beam axis dia. (mm) Ambient temp. o1.2 -30 to +300 C Note: Sold as a set comprising vacuum type fiber + photo-terminal (FV-BR1) + fiber at atmospheric side (FT-J8). Retroreflective Type Others Thru-beam Fiber Dimensions Convergent Reflective reflective Fiber Options Vacuumresistant Type Bending Fiber cable radius length (mm) : Free-cut Shape of fiber head (mm) Model No. Bending Fiber cable radius length (mm) : Free-cut 300 C, Rectangular head W9.5 x H5.2 x D15 W19 x H5 x D27 U-LG LONG FAST H-SP FX-101 Ambient (Upper value) temp. FX-102 (Lower value) 1m 10 to 340 0.394 to 13.386 25 to 80 20 to 200 0.787 to 7.874 15 to 270 0.591 to 10.630 0.984 to 3.150 20 to 120 0.787 to 4.724 10 to 220 HYPR 20 to 45 0.787 to 1.772 0.394 to 8.661 5 to 500 0.197 to 19.685 3m STD 8 0.315 HYPR 18 0.709 R18 FD-H30-L32V-S (Note 1) FX-500 series STD FD-H30-KZ1V-S (Note 1) 300 C, Glass substrate detection Sensing range (mm in)(Note 2) -30 to 12 0.472 2.5 to 6.5 +300 C 10 0.394 0.098 to 0.256 5.5 0.217 0 to 11 1.5 to 3 0.059 to 0.118 0 to 0.433 Notes: 1) Sold as a set comprising vacuum type fiber + photo-terminal (FV-BR1) + fiber at atmospheric side (FT-J8). 2) The sensing range of reflective type is the value for transparent glass 100 x 100 x t0.7 mm 3.937 x 3.937 x t0.028 in. 27 New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Set contents Vacuum side Atmospheric side Digital fiber sensor Fibers Super Quality Vacuum resistant fibers Threaded Type Atmospheric side fiber (FT-J8) Chamber wall or flange (3.0 to 20 mm 0.118 to 0.787 in thick) Cylindrical Type Photo-terminals (FV-BR1) Sleeve Flat Type Model No. when ordering individual parts from repair parts Vacuum resistant fiber FT-H30-M1V (one pair set) FD-H30-KZ1V FD-H30-L32V Photo-terminal FV-BR1 (one pair set) Atmospheric side fiber FT-J8 (one pair set) Small Spot ounting bracket for FD-H30-KZ1V(-S) M MS-FD-2 Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Fiber options Chemicalresistant Lens (For thru-beam fiber) For thru-beam type fiber Designation Vacuum resistant expansion lens (Note 1) Model No. Heatresistant Description Vacuumresistant FX-500 series Amplifier FV-LE1 Fiber Mode HYPR U-LG LONG STD 3,600 3,600 3,400 1,500 FT-H30-M1V-S 141.732 141.732 133.858 59.055 (Note 2) Vacuum resistant side-view lens (Note 1) Liquid Leak / Liquid Detection Increases the sensing range 4 times or more. * Ambient temperature: -60 to +350 C -76 to +662 F (Note 3) * Beam axis dia: o3.6 mm o0.142 in Sensing range (mm in) [Lens on both sides] (Note 4) (Note 2) FAST H-SP 900 35.433 370 14.567 FX-101 FX-102 450 17.717 1,600 62.992 Fiber Dimensions Beam axis is bent by 90. * Ambient temperature: -60 to +300 C -76 to +572 F (Note 3) * Beam axis dia: o3.7 mm o0.146 in Sensing range (mm in) [Lens on both sides] (Note 4) Fiber Mode Thru-beam Type Retroreflective Type FX-500 series Amplifier FV-SV2 HYPR U-LG LONG STD 3,600 3,600 3,400 1,500 FT-H30-M1V-S 141.732 141.732 133.858 59.055 (Note 2) (Note 2) Fiber Options FAST H-SP 900 35.433 370 14.567 FX-101 FX-102 450 17.717 1,600 62.992 Notes: 1) Be careful when installing the thru-beam type fiber equipped with the lens, as the beam envelope becomes narrow and alignment is difficult. 2) The fiber cable length practically limits the sensing range. 3) Refer to P.26 for the ambient temperature of fibers to be used in combination. 4) The fiber cable length for the FT-H30-M1V-S is 1 m 3.281 ft. The sensing ranges in HYPR, U-LG and LONG of FX-500 series, in FX-102 take into account the length of the FT-J8 atmospheric side fiber. Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 28 New product introduction Tough Fiber Liquid Leak / Liquid Detection It corresponds to various liquid events, from the contact (wetted) type to the pipe mounting type, and up to leak detection. Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Applications Detecting liquid level in a tank Leak detection for use in semiconductor device manufacturing FD-F71 Fibers Super Quality Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant For liquid surface level upper limit sensing, a "without fluid" incident light sensor is recommended. The sensor will turn OFF during abnormal conditions (excess fluid, fiber disconnection, etc.)! Liquid absent: Beam received (Output ON) Liquid present / fiber is cutoff: Beam not received (Output OFF) FD-FA93 Applicable pipe: Transparent pipe, Outer diameter o8 mm o0.315 in or more The sensor will turn OFF during abnormal conditions (insufficient liquid, fiber disconnection, etc.) ! Liquid present: Beam received (Output ON) Liquid absent / fiber is cutoff: Beam not receired (Output OFF) FT-F93 FX-100 series INDEX Earlier models comparison table Pipe-mountable type Amplifiers Liquid level sensing leak Liquid level sensing Liquid detection Others Shape of fiber head (mm) Heat resistant 125 C Fluorine resin coating o6 Heat resistant 105 C Fluorine resin coating o4 Heat resistant 70 C Fluorine resin coating throughout the fiber o4 SEMI S2 compliant W20 x H30 x D10 Model No. FD-F8Y FD-HF40Y (Note 2) Bending radius (mm) Protective tube R40 Fiber R15 Protective tube R20 Fiber FD-F41Y (Note 2) 7RXJK FD-F71 R10 Fiber cable length : Free-cut Protective tube R20 Fiber R4 Description FX-500 series (STD mode) FX-101 FX-102 Protection Ambient temp. o6 mm o0.236 in -40 to Protective tube: Fluorine resin, length 1,000 mm 39.370 in (not cuttable) IP68 2m Liquid surface not contacted: Beam received, +125 C (Note 1) Liquid surface contacted: Beam not received o4 mm o0.157 in -40 to Protective tube: Fluorine resin, length 500 mm 19.685 in (cuttable) Liquid surface not contacted: Beam received, +105 C Liquid surface contacted: Beam not received 2m o4 mm o0.157 in -40 to Protective tube: Fluorine resin, length 500 mm 19.685 in (cuttable) IP67 +70 C Liquid surface not contacted: Beam received, Liquid surface contacted: Beam not received 5m -20 to +60 C Liquid leak detection Leak absent: Beam received, Leak present: Beam interrupted Bending durability Standard W25 x H13 x D20 FD-F41 R10 For 1 mm thick PFA pipe W25 x H13 x D20 Mountable on pipe*array fiber Liquid sensing Contact type Reflective Type FX-500 series FT-F93 Thru-beam Reflective type / Thru-beam type Fiber Options Retroreflective Type For 1 mm 0.039 in thick pipes manufactured by PFA We recommend using the sensor so that the output is ON when liquid is present at lower limit detection level. Type Thru-beam Type FD-F4 Standard type (When used with the tying bands: o8 to o80 mm o0.315 to o3.150 in) Liquid Leak / Liquid Detection Fiber Dimensions FD-F41 Strong against air bubbles FD-F41 FD-F4 W6.5 x H28.3 x D17 SEMI S2 compliant FD-F4 7RXJK FD-FA93 7RXJK FT-F93 W23 x H20 x D17 R4 Bending durability Protective tube R20 Fiber R2 Bending durability 2m Applicable pipe diameter: Outer dia. o6 to o26 mm o0.236 to o1.024 in transparent pipe [PVC (vinyl chloride), fluorine resin, polycarbonate, acrylic, glass, wall thickness 1 to 3 mm 0.039 to 0.118 in] Liquid absent: Beam received, Liquid present: Beam not received Applicable pipe diameter: Outer dia. o6 to o26 mm o0.236 to o1.024 in transparent pipe [PFA (fluorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in] Liquid absent: Beam received, Liquid present: Beam not received Applicable pipe diameter: Outer dia. o8 mm o0.315 in or more transparent pipe (When used with the tying bands: o8 to o80 mm o0.315 to o3.150 in) [PFA (fluorine resin), including translucent] Liquid absent: Beam received, Liquid present: Beam not received Applicable pipe diameter: Outer dia. o3 to o10 mm o0.118 to o0.394 in transparent pipe [PFA (fluorine resin) or equivalently transparent pipe, wall thickness 0.3 to 1 mm 0.012 to 0.039 in] Liquid absent: Beam not received, Liquid present: Beam received -40 to +100 C -40 to +70 C IP40 -40 to +60 C Notes: 1) The allowable cutting range is 1,000 mm 39.370 in from the end that the amplifier inserted. 2) Liquid inflow prevention joint, protective tube extension joint, fiber mounting joint is available. Please refer to next page for details. 7RXJK : It is a fiber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180) and bendable (bending radius: R4 mm or less) features. 29 New product introduction Tough Fiber Fiber Selection Guide Choose by model Accessories MS-FD-F7-1 (SUS mounting bracket for FD-F71) MS-FD-F7-2 (PVC mounting bracket for FD-F71) Fiber options Liquid inflow prevention joint (Note) MS-FX-01Y Protective tube extension joint (Note) MS-FX-02Y Fiber mounting joint (Note) MS-FX-03Y Super Quality Description Applicable fibers Model No. Threaded Type This joint suppresses false operations due to liquid slip-in from the top of the protective tube. Cylindrical Type The protective tube can be extended. Flat Type Sleeve FD-HF40Y FD-F41Y Small Spot The joint is used for mounting fibers on a tank. Narrow Beam Wide Beam Note: The joint internal ferrule (MS-FX-YF) is available as a spare part. A distorted ferrule may result in leakage. Liquid inflow prevention joint Body Ferrule (MS-FX-YF) Body Body Union nut Ferrule (MS-FX-YF) Union nut Ferrule (MS-FX-YF) Union nut Viewing new models Fibers Designation MS-FX-01Y * MS-FX-01Y MS-FX-01Y MS-FX-01Y Choose by shape/ application Protective tube extension joint MS-FX-02Y * MS-FX-02Y MS-FX-02Y MS-FX-02Y Union nut Ferrule (MS-FX-YF) Union nut Union nut Ferrule (MS-FX-YF) Ferrule (MS-FX-YF) Body Ferrule (MS-FX-YF) Body Body Union nut Ferrule (MS-FX-YF) Union nut Ferrule (MS-FX-YF) Union nut Convergent Reflective Type Fiber mounting joint MS-FX-03Y * MS-FX-03Y MS-FX-03Y MS-FX-03Y Body Retroreflective Type Chemicalresistant Union nut Ferrule (MS-FX-YF) Union nut Union nut Ferrule Body(MS-FX-YF) Ferrule (MS-FX-YF) Body Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 30 Fiber options New product introduction Tough Fiber Fiber Selection Guide Lens (For thru-beam type fiber) Designation Model No. Description Increases the sensing range by 5 times or more. * Ambient temperature: -60 to +350 C -76 to +662 F (Note 3) * Beam dia: o3.6 mm o0.142 in Sensing range (mm in) [Lens on both sides] Choose by model Choose by shape/ application Fiber Mode FT-43 Fibers Threaded Type Expansion lens (Note 1) Cylindrical Type FX-LE1 Sleeve Flat Type Small Spot Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant For thru-beam type fiber Narrow Beam Thru-beam Type Retroreflective Type Reflective Type Others FX-500 series FX-100 series INDEX Earlier models comparison table FAST H-SP 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 1,600 62.992 2,400 94.488 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 2,200 86.614 3,400 133.858 3,600 141.732 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,500 59.055 1,600 62.992 1,600 62.992 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) FT-R40 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 1,900 74.803 3,100 122.047 3,600 141.732 FT-H35-M2 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,300 129.921 1,400 55.118 2,000 78.740 3,500 137.795 FT-H20W-M1 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 850 33.465 1,300 51.181 1,600 62.992 1,600 62.992 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,200 47.244 500 19.685 (Note 2) (Note 2) 3,600 141.732 3,600 141.732 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) 3,500 137.795 2,000 78.740 1,600 62.992 (Note 2) (Note 2) (Note 2) (Note 2) 1,000 39.370 (Note 2) (Note 2) (Note 2) (Note 2) 1,600 62.992 (Note 2) 3,500 137.795 (Note 2) Tremendously increases the sensing range with large diameter lenses. * Ambient temperature: -60 to +350 C -76 to +662 F (Note 3) * Beam dia: o9.8 mm o0.386 in Sensing range (mm in) [Lens on both sides] FX-500 series Amplifier Fiber Mode FT-43 FT-42 FT-42W Superexpansion lens (Note 1) FT-45X FX-LE2 FX-101 FX-102 HYPR U-LG LONG STD FAST H-SP 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) FT-R40 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 FT-H35-M2 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,500 137.795 3,500 137.795 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) 1,600 62.992 FT-H20W-M1 FT-H20-M1 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) FT-H13-FM2 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,500 137.795 3,500 137.795 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,500 137.795 3,500 137.795 FT-H20-J50-S FT-H20-J30-S FT-H20-J20-S Amplifiers STD 3,600 141.732 FT-H20-J50-S FT-H20-J30-S FT-H20-J20-S Liquid Leak / Liquid Detection Fiber Dimensions LONG (Note 2) FT-H20-M1 Vacuumresistant Fiber Options U-LG (Note 2) FT-45X FX-101 FX-102 HYPR (Note 2) FT-42 FT-42W Super Quality Wide Beam FX-500 series Amplifier Viewing new models (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) Notes: 1) Be careful sure to use it only after you have adjusted it sufficiently when installing the thru-beam type fiber equipped with the expansion lens, as the beam envelope becomes narrow and alignment is difficult. 2) The fiber cable length practically limits the sensing range. 3) Refer to P.10~ for the ambient temperature of fibers to be used in combination. 31 Fiber options New product introduction Tough Fiber Lens (For thru-beam type fiber) Designation Model No. Description Fiber Selection Guide Beam axis is bent by 90. * Ambient temperature: -60 to +300 C -76 to +572 F (Note 4) * Beam dia: o2.8 mm o0.110 in Sensing range (mm in) [Lens on both sides] FX-SV1 U-LG LONG STD FAST H-SP FT-43 3,600 141.732 3,400 133.858 2,600 102.362 1,700 66.929 970 38.189 310 12.205 510 20.079 1,400 55.118 FT-42 3,600 141.732 3,600 141.732 3,600 141.732 2,100 82.677 1,150 45.276 370 14.567 500 19.685 1,700 66.929 FT-42W 3,600 141.732 3,500 137.795 2,700 106.299 1,800 70.866 990 38.976 320 12.598 480 18.898 1,300 51.181 FT-45X 1,600 62.992 1,600 62.992 1,600 62.992 1,400 55.118 800 31.496 210 8.268 540 21.260 1,600 62.992 (Note 2) (Note 2) (Note 2) For thru-beam type fiber (Note 2) (Note 2) Viewing new models Fibers Super Quality Threaded Type Cylindrical Type (Note 2) (Note 2) (Note 2) (Note 2) Sleeve 780 30.709 500 19.685 150 5.906 280 11.024 800 31.496 Flat Type (Note 2) 1,600 62.992 1,600 62.992 1,200 47.244 FT-H20W-M1 3,500 137.795 1,600 62.992 (Note 2) 1,500 59.055 950 37.402 560 22.047 190 7.480 140 5.512 400 15.748 Small Spot FT-H20-M1 1,600 62.992 1,600 62.992 1,300 51.181 780 30.709 500 19.685 150 5.906 280 11.024 840 33.071 960 37.795 740 29.134 450 17.717 290 11.417 80 3.150 150 5.906 410 16.142 FT-H20-J50-S FT-H20-J30-S FT-H20-J20-S Vacuumresistant side-view lens (Note 1) FX-101 FX-102 HYPR Mode FT-H35-M2 Expansion lens for vacuum fiber (Note 1) Choose by shape/ application FX-500 series Amplifier Fiber Side-view lens Choose by model (Note 2) 1,600 62.992 (Note 2) (Note 2) Sensing range increases by 4 times or more. * Ambient temperature: -60 to +350 C -76 to +662 F (Note 4) * Beam dia: o3.6 mm o0.142 in Sensing range (mm in) [Lens on both sides] (Note 3) Mode HYPR U-LG FT-H30-M1V-S 3,600 141.732 3,600 141.732 Fiber (Note 2) (Note 2) LONG STD FAST H-SP 3,400 133.858 1,500 59.055 900 35.433 370 14.567 Mode HYPR U-LG FT-H30-M1V-S 3,600 141.732 3,600 141.732 (Note 2) (Note 2) Retroreflective Type FX-101 FX-102 450 17.717 1,600 62.992 Vacuumresistant Liquid Leak / Liquid Detection Fiber Options FX-500 series Amplifier Fiber Convergent Reflective Type Heatresistant Beam axis is bent by 90. * Ambient temperature: -60 to +300 C -76 to +572 F (Note 4) * Beam dia: o3.7 mm o0.146 in Sensing range (mm in) [Lens on both sides] (Note 3) FV-SV2 Wide Beam Chemicalresistant FX-500 series Amplifier FV-LE1 Narrow Beam LONG STD FAST H-SP 3,400 133.858 1,500 59.055 900 35.433 370 14.567 FX-101 FX-102 450 17.717 1,600 62.992 Notes: 1) Be careful sure to use it only after you have adjusted it sufficiently when installing the thru-beam type fiber equipped with the expansion lens, as the beam envelope becomes narrow and alignment is difficult. 2) The fiber cable length practically limits the sensing range. 3) The fiber cable length for the FT-H30-M1V-S is 1 m 3.28 ft. The sensing ranges in HYPR, U-LG and LONG of FX-500 series, in FX-102 take into account the length of the FT-J8 atmospheric side fiber. 4) Refer to P.10~ for the ambient temperature of fibers to be used in combination. Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 32 Fiber options New product introduction Tough Fiber Fiber Selection Guide Lens (For reflective type fiber) Designation Description Pinpoint spot of o0.5 mm o0.020 in. Enables detection of minute objects or small marks. Pinpoint spot lens Choose by model Model No. FX-MR1 * Distance to focal point: 6 1 mm 0.236 0.039 in * Applicable fibers: FD-42G, FD-42GW * Ambient temperature: -40 to +70 C -40 to +158 F (Note) Choose by shape/ application The spot diameter is adjustable from o0.7 to o2 Sensing range mm o0.028 to o0.079 in according to how much Screw-in depth Distance to focal point Spot diameter the fiber is screwed in. * Applicable fibers: FD-42G, FD-42GW 7 mm 18.5 mm approx. o0.7 mm * Ambient temperature:-40 to +70 C 27 mm approx. o1.2 mm 12 mm -40 to +158 F (Note) Spot * Accessory: MS-EX3 (mounting bracket) 43 mm approx. o2.0 mm 14 mm diameter Screw-in depth Viewing new models Zoom lens FX-MR2 Distance to focal point Fibers Threaded Type Cylindrical Type Sleeve Flat Type Small Spot For reflective type fiber Super Quality Finest spot lens FX-MR3 Distance to focal point Spot diameter Narrow Beam Finest spot lens Wide Beam FX-MR6 Convergent Reflective Type Retroreflective Type Sensing range Extremely fine spot of o0.1 mm o0.004 in approx. achieved. * Applicable fibers: FD-EG31, FD-EG30, FD-42G, FD-42GW, FD-32G, FD-32GX * Ambient temperature: -20 to +60 C -4 to +140 F (Note) Sensing range Screw-in FX-MR2 is converted into a side-view type and depth Chemicalresistant side-view type FX-MR5 Distance to focal point Vacuumresistant Fiber model No. Distance to focal point Spot diameter FD-EG31 7.5 0.5 mm o0.15 mm approx. FD-EG30 7.5 0.5 mm o0.3 mm approx. FD-42G/42GW 7.5 0.5 mm o0.5 mm approx. FD-32G/32GX Fiber model No. Distance to focal point Spot diameter FD-EG31 7 0.5 mm o0.1 mm approx. FD-EG30 7 0.5 mm o0.2 mm approx. FD-42G/42GW FD-32G/32GX 7 0.5 mm o0.4 mm approx. Sensing range can be mounted in a very small space. * Applicable fibers: FD-42G, FD-42GW * Ambient temperature: -40 to +70 C -40 to +158 F (Note) Zoom lens Heatresistant Liquid Leak / Liquid Detection Extremely fine spot of o0.15 mm o0.006 in approx. achieved. * Applicable fibers: FD-EG31, FD-EG30, FD-42G, FD-42GW, FD-32G, FD-32GX * Ambient temperature: -40 to +70 C -40 to +158 F (Note) Screw-in depth Distance to focal point Spot diameter Spot diameter 8 mm 13 mm approx. o0.5 mm 10 mm 15 mm approx. o0.8 mm 14 mm 30 mm approx. o3.0 mm Note: Refer to P.11~ for the ambient temperature of fibers to be used in combination. Model No. when ordering heat-resistant fibers individually as replacement parts Fiber Options * Heat-resistant side fiber one pair set FT-H20-J20, FT-H20-J30, FT-H20-J50, FT-H20-VJ50, FT-H20-VJ80 Model No. when ordering vacuum-resistant fibers individually as replacement parts Fiber Dimensions Thru-beam Type Retroreflective Type * Vacuum-resistant fiber FD-H30W-M1V (one pair set) FD-H30-KZ1V FD-H30-L32V * Fiber at atmospheric side FT-J8 (one pair set) * Photo-terminal FV-BR1 (one pair set) * Mouting bracket for FD-H30-KZ1V(-S) MS-FD-2 Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Accessories (attached with fibers) * * * * * * * * * * RF-003 (FR-KZ50E/KZ50H exclusive reflector) RF-13 (Reflective tape) FX-CT1 (Fiber cutter) FX-CT2 (Fiber cutter) FX-CT3 (Fiber cutter) FX-AT2 (Attachment for fixed-length fiber, Orange) FX-AT3 (Attachment for o2.2 mm o0.087 in fiber, Clear orange) FX-AT4 (Attachment for o1 mm o0.039 in fiber, Black) FX-AT5 (Attachment for o1.3 mm o0.051 in fiber, Gray) FX-AT6 Attachment for o1 mm o0.039 in / o1.3 mm o0.051 in ( mixed fiber, Black / Gray * MS-FD-2 (Fiber mounting bracket) Earlier models comparison table * RF-003 ) * RF-13 * FX-AT2 * FX-CT1 * FX-AT3 * MS-FD-2 * FX-CT2 * FX-AT4 * FX-AT5 * FX-CT3 * FX-AT6 33 Fiber options New product introduction Others Designation Model No. FTP-1000 (1 m 3.281 ft) ( ) For M4 thread FTP-1500 (1.5 m 4.921 ft) FTP-N500 (0.5 m 1.640 ft) FTP-N1000 (1 m 3.281 ft) For M3 thread Applicable fibers Protective tube For thru-beam type fiber FTP-N1500 (1.5 m 4.921 ft) FDP-500 (0.5 m 1.640 ft) FDP-1000 (1 m 3.281 ft) Protective tube For reflective type fiber ( ) * FTP- * FDP- Description FTP-500 (0.5 m 1.640 ft) For M6 thread FDP-1500 (1.5 m 4.921 ft) FDP-N500 (0.5 m 1.640 ft) FDP-N1000 (1 m 3.281 ft) FT-42 FT-42S FT-42W FT-43 FT-H13-FM2 FT-31 FT-31S FT-31W FD-31 FD-31W Choose by model FD-41S FD-41SW * MS-AJ1-F Universal sensor mounting stand (Note 2) MS-AJ1-F Horizontal mounting type MS-AJ2-F Vertical mounting type Single core holder Applicable fibers Fiber mounting joint (Note 2) MS-FX-02Y Mounting stand assembly for fiber (For M3, M4 or M6 threaded head fiber) This joint suppresses false operations due to liquid slip-in from the top of the protective tube. The joint is used for mounting fibers on a tank. The incident light intensity may vary when using a multi-core fiber or a thin type sharp bending fiber. This holder suppresses the variation in the incident light intensity. (Brown) FX-AT15A RF-210 It is available for FR-Z50HW. Refer to P.22 for the sensing range of FR-Z50HW to be used in combination. RF-220 Reflector The protective tube can be extended. MS-FX-03Y RF-230 Notes: 1) Do not bend the sleeve part of any side-view type fiber or ultra-small diameter head type fiber. 2) The joint internal ferrule (MS-FX-YF) is available as a spare part. A distorted ferrule may result in leakage. Liquid inflow prevention joint MS-FX-01Y * MS-FX-01Y MS-FX-01Y MS-FX-01Y Protective tube extension joint MS-FX-02Y * MS-FX-02Y MS-FX-02Y MS-FX-02Y Union nut Body Ferrule (MS-FX-YF) Body Body Union nut Ferrule (MS-FX-YF) Ferrule (MS-FX-YF) Union nut * RF-210 11 mm MS-FX-03Y * MS-FX-03Y MS-FX-03Y MS-FX-03Y Body Ferrule (MS-FX-YF) Body Body Union nut Ferrule (MS-FX-YF) Reflector * RF-220 33.3 mm 50.3 mm 35.3 mm 12.8 mm 42.3 mm 59.3 mm Sleeve Flat Type 20 20 Angle adjustment: 20 Height adjustment: 150 mm 5.906 in approx. Mounting hole for M6 screw Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant * MS-AJ2-F 360 rotation Forward / back adjustment: 130 mm 5.118 in approx. 20 20 Angle adjustment: 20 Height adjustment: 150 mm 5.906 in approx. Mounting hole for M6 screw Single core holder Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Union nut Others Ferrule (MS-FX-YF) Union nut Union nut Ferrule Body(MS-FX-YF) Ferrule (MS-FX-YF) Body Amplifiers FX-100 series Union nut * RF-230 360 rotation * FX-AT15A Cylindrical Type Small Spot Forward / back adjustment: 130 mm 5.118 in approx. 360 rotation Threaded Type FX-500 series Ferrule (MS-FX-YF) 8.3 mm 360 rotation Fiber mounting joint Ferrule (MS-FX-YF) Union nut Union nut Ferrule (MS-FX-YF) Ferrule (MS-FX-YF) Body Union nut Super Quality Using the arm which enables adjustment in the horizontal direction, sensing can also be done from above an assembly line. The fiber bender bends the sleeve part of the fiber head at the proper radius. (Note 1) FD-HF40Y FD-F41Y Fibers Universal sensor mounting stand FB-1 Protective tube extension joint (Note 2) Viewing new models The protective tube, made of noncorrosive stainless steel, protects the FD-62 inner fiber cable from FD-H13-FM2 any external forces. FD-61 FD-61G FD-61S FD-61W MS-FX-01Y Choose by shape/ application * FB-1 Fiber bender Liquid inflow prevention joint (Note 2) Fiber Selection Guide Fiber bender FD-41 FD-41W For M4 thread FDP-N1500 (1.5 m 4.921 ft) Union nut Tough Fiber Protective tube 8.3 mm INDEX Earlier models comparison table 34 New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application DIMENSIONS (Unit: mm in) Dimensions are listed in the order of thru-beam type, retroreflective type, and reflective type, and in alphabetic order of the model No. Thru-beam type fibers FT-140 Free-cut o23 o0.906 19 0.748 o10 o0.394 o10 o0.394 Lens (PMMA) 17 23 0.906 0.669 8 8 3.5 0.315 0.315 0.138 Holder (ABS) Toothed lock washer M14 [Iron(Chromed)] FT-31 Free-cut Cylindrical Type 2 0.079 o6.5 o0.256 10 0.394 Convergent Reflective Type Retroreflective Type Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type o1 o0.039 FX-500 series FX-100 series Free-cut 2.7 0.106 Free-cut 5.5 0.217 40 1.575 Allowable 10 bending 10 0.394 range 0.394 o0.88 o0.035 Sleeve [Stainless steel(SUS304)] 5 0.197 10 0.394 2,000 78.740 1.8 0.071 (30) (1.181) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] M3 x 0.5 0.020 End bracket [Stainless steel(SUS303)] FT-40 <with FX-AT4> o6.5 o0.256 2.7 0.106 10 0.394 2 5.5 0.079 0.217 2,000 78.740 1.8 0.071 (30)(1.181) Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] FT-42 Free-cut FT-140 o8.5 o0.335 3 0.118 1 0.039 o2 3.5 0.138 o0.079 <with FX-AT2> o8.5 o0.335 o1 o0.039 (o2)(o0.079)Model No. tube(PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) End bracket [Stainless steel(SUS303)] -0.1 -0.004 o3 o0.118 -0.13 -0.005 Mounting reference surface (Screw periphery) o2 o0.079 M3 x 0.5 0.020 Toothed lock washer M3 [Stainless steel(SUS304)] 3.5 0.138 2,000 78.740 Resin plug(ABS) (o4.33) (20) o2.2 (o0.170) (0.787) o0.087 12 0.472 3 0.118 2.4 0.094 1 0.039 o2 o0.079 o4 o0.157 Mounting reference surface (Screw periphery) End bracket [Brass(Nickel plated)] FT-31S M2.6 x 0.45 0.018 (19.7) (0.776) 10.2 0.402 (0.3) (0.012) o2.2 o1.8 (o3.2) (o0.126) Model No. tube (PVC) o0.087 o0.071 Toothed lock washer M4 [Brass(Nickel plated)] Opposing faces 7 0.276 thickness 2.4 0.094 [Brass(Nickel plated)] M4 x 0.7 0.028 FT-42S Free-cut <with FX-AT3> <with FX-AT3> 12 0.472 2.4 0.094 2,000 78.740 o2.2 o0.087 (30) (1.181) o1 o0.039 fiber core x 1 (Acrylic) Sheath o2.2 o0.087 (Polyethylene) o4 o0.157 -0.1 0.004 -0.13 0.005 Mounting reference surface (Screw periphery) End bracket [Stainless steel(SUS303)] (o3.2) (o0.126) Model No. tube (PVC) Toothed lock washer M4 [Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] M2.6 x 0.45 0.018 M4 x 0.7 0.028 FT-42W Free-cut o8.5 o0.335 7 0.276 3.5 0.138 40 1.575 Allowable 10 bending 10 0.394 range 0.394 5 0.197 12 0.472 2,000 78.740 2.4 0.094 o2.5 o0.098 o1.48 o0.058 Sleeve[Stainless steel(SUS304)] M4 x 0.7 0.028 Toothed lock washer M4[Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] 3 7 0.276 0.118 3.5 0.138 1 0.039 12 0.472 o2 -0.1 -0.004 o4 o0.157 -0.13 -0.005 o0.079 Mounting reference surface (Screw periphery) M2.6 x 0.45FT-31W 0.018 M4 x 0.75 0.030 Toothed lock washer M4 [Stainless steel(SUS304)] 2.4 0.094 2,000 78.740 (30) (1.181) o2.2 o0.087 (o3.2)(o0.126) Model No. tube (PVC) o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) End bracket [Stainless steel(SUS303)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] o2.2 o0.087 (30) (1.181) (o3.2)(o0.126) Model No. tube (PVC) o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) End bracket[Stainless steel(SUS303)] FT-43 Free-cut <with FX-AT3> o8.5 o0.335 o1 o0.039 (o2)(o0.079) Model No. tube (PVC) o2 o0.079 Toothed lock washer M3 [Stainless steel(SUS304)] Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] INDEX Earlier models comparison table Opposing faces 5.5 0.217 thickness 1.8 0.071 [Brass(Nickel plated)] <with FX-AT4> (o2) (o0.079) Model No. tube (PVC) Reflective Type Amplifiers 0.402 (0.3) (0.012) FT-31S Toothed lock washer M3 [Stainless steel(SUS304)] FT-31W Retroreflective Type Others (19.7) (0.776) 10.2 o2.2 o1.8 (o2) (o0.079) Model No. tube (PVC) o0.087 o0.071 Toothed lock washer M3 [Brass(Nickel plated)] M3 x 0.5 0.020 o0.5 o0.020 fiber core x 1 (Acrylic) Sheath o1 o0.039 (Polyethylene) o3 o0.118 -0.10 -0.004 -0.13 -0.005 Mounting reference surface (Screw periphery) End bracket [Stainless steel(SUS303)] M3 x 0.5 0.020 Chemicalresistant Heatresistant 10 0.394 o3 o0.118 Mounting reference surface (Screw periphery) End bracket [Brass(Nickel plated)] o6.5 o0.256 2,000 78.740 1.8 0.071 (30) (1.181) Small Spot Wide Beam 2,000 78.740 1.8 Resin plug(ABS) 0.071 o1 (o4.33)(o0.170) (20) (0.787) o0.039 <with FX-AT4> o2 o0.079 2.7 0.106 Flat Type Narrow Beam o2.2 o0.087 (30) (1.181) Hexagon nut M14 [Brass(Nickel plated)] Super Quality Sleeve <with FX-AT2> 2 o6.5 o0.256 0.079 2.7 0.106 o2 o0.079 10,000 393.701 (o3.2)(o0.126) Model No. tube (PVC) o4.5 o0.177 o1 o0.039 fiber core x 1 (PMMA) o4.5 o0.276 Sheath o2.2 o0.087(Polyethylene) Protector (PVC) M14 x 1 0.039 Threaded Type FT-30 <with FX-AT3> Viewing new models Fibers Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. <with FX-AT3> o8.5 o0.335 7 0.276 3.5 0.138 3 0.118 1 0.039 12 0.472 o2 -0.1 -0.004 o4 o0.157 -0.13 -0.005 o0.079 Mounting reference surface (Screw periphery) M4 x M2.6 x 0.45 0.018 0.7 0.028 Toothed lock washer M4[Stainless steel(SUS304)] 2,000 78.740 2.4 0.094 (30) (1.181) o2.2 o0.087 (o3.2)(o0.126) Model No. tube (PVC) o1.5 o0.059 fiber core x 1 (PMMA) Sheath o2.2 o0.087(Polyethylene) End bracket[Stainless steel(SUS303)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] 35 DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retroreflective type, and reflective type, and in alphabetic order of the model No. Thru-beam type fibers FT-45X FT-A11 4.2 0.165 (8) (0.315) (13.5) 9.5 0.374 (0.531) FT-A11W Free-cut 57 FT-A32 Lens (Norbornene resin) Sensing face (2.2 x 11) (0.087 x 0.433) Center of beam axis 4.2 0.165 57 0.1 4R 2-R 5 0.197 2-o3.2 o0.126 o6.0 o0.236 countersinking (on both sides) Enclosure (PC) (19) (0.748) 16 (20) 0.630 (0.787) 4 2-R FT-A32W Free-cut 12 0.472 2-o3.2 o0.126 o6 o0.236 countersinking(on both sides) 45 1.772 FT-AL05 Free-cut <with FX-AT3> Center of beam axis 19 0.748 5 0.197 Sensing face (3.2 x 32) (0.126 x 1.260) Lens (Norbornene resin) 4 0.157 65 2.559 2,000 78.740 Beam Enclosure(PC) 5.2 axis 0.205 o1.3 o0.051 7.3 0.287 (19) (0.748) 16 (20) 0.630 (0.787) 7 .15 4 R0 12 0.472 15 0.591 8 0.315 5 0.197 Head block (LCP) o1 o0.039 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) 2-R 157 R0. Sensing face(3.2 x 32)(0.126 x 1.260) Lens(Norbornene resin) 4 0.157 65 2.559 2,000 78.740 Beam axis Enclosure(PC) 5.2 0.205 o1.3 o0.051 7.3 0.287 <with FX-AT5> FT-45X FT-E13 Free-cut 1,000 39.370 15 0.591 Details of o3 o0.118 0 0 -0.1 -0.004 sensing part Mounting reference surface (Periphery) 5.25 0.207 FT-E23 Free-cut <with FX-AT4> 15 0.591 50.5 0.1970.020 (o2) (o0.079) Model No. tube (PVC) Sleeve [Stainless steel (SUS304)] FT-A32 End bracket [Stainless steel (SUS303)] Free-cut 7.2 0.283 10.3 0.406 5.5 0.217 FT-A32W 17 9 0.354 0.669 6 0.236 Enclosure (ABS) 6 0.236 Beam-emitting side (Gray) Beam-receiving side (Black) o0.25 o0.010 x 4 fiber core (PMMA) Sheath o1 o0.039 (Polyethylene) o3.1 o0.122 Protective tube (PFA) o3.1 o0.122 Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Dimensions Thru-beam Type Reflective Type o0.5 o0.020 x 1 fiber core (PMMA) Sheath o1 o0.039 (Polyethylene) Others Amplifiers FX-500 series FX-100 series FT-H13-FM2 Free-cut <with FX-AT4> 23 0.906 Cylindrical Type Retroreflective Type 0 0 o4 o0.016 -0.1 -0.004 2,000 78.740 2-o1 o0.039 Threaded Type 0 0 Details of (o2) (o0.079) Model No. tube (PVC) o3 o0.118 -0.1 -0.004 sensing part Mounting reference surface (Periphery) o0.25 o0.010 0 0 -0.1 -0.004 1,000 39.370 1,000 39.370 o1 (30) o0.039 (1.181) o0.25 o0.010 fiber core x1 (PMMA) FT-F93 Super Quality Fiber Options FT-A11 Sensing part(o0.25 fiber core o0.010 x 16) o0.125 o0.005 fiber core x 1 (PMMA) 20 0.787 12 0.472 o0.25 o0.010 fiber core x 16 (PMMA) Sheath o2.2 o0.087 (Polyethylene) <with FX-AT4> o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) o2.2 o0.087 4.5 0.177 Enclosure(PPS) Sleeve [Stainless steel (SUS304)] End bracket [Stainless steel (SUS303)] 2,000 78.740 2-M3 x 0.5 0.020 15 10 0.394 0.591 o1 (30) o0.039 (1.181) 50.5 0.1970.020 2.5 0.098 2.5 0.098 4.5 Details of 0.177 sensing part 1 0.039 2-o3.2 o0.126 o6 o0.236 countersinking(on both sides) 45 1.772 FT-A11W Fibers Sleeve o1 o0.039 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) 4 19 0.748 0.157 o0.75 o0.030 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) Center of beam axis 19 0.748 4 0.157 27 1.063 2,000 78.740 Beam axis 4 0.157 5.2 0.205 (8)(0.315) o1.3 o0.051 (13.5) 9.5 (0.531) 0.374 Viewing new models Free-cut <with FX-AT5> <with FX-AT5> 8 0.315 Choose by shape/ application o0.75 o0.030 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) 2-o3.2 o0.126 o6.0 o0.236 countersinking (on both sides) Enclosure(PC) 19 4 0.157 0.748 Fiber Selection Guide Choose by model 4 0.157 27 1.063 2,000 78.740 Beam axis 4 0.157 o1.3 5.2 0.205 o0.051 .1 o2.2 o0.087 (o4)(o0.157) Model No. tube(PVC) Resin plug(ABS) Protective tube Polyolefin tube included SUS304 spiral tube Crimping part Lens(Norbornene resin) Sensing face(2.2 x 11)(0.087 x 0.433) 8 0.315 R0 o2 o0.079 M4 x 0.7 0.028 Toothed lock washer M4 Details of sensing part [Stainless steel(SUS304)] 3.5 0.138 Opposing faces 7 0.276 thickness 2.4 0.094 End bracket [Stainless steel(SUS304)] [Stainless steel (SUS303)] o1 o0.039 fiber core x 1 (PMMA) o8.5 o0.335 Center of beam axis 2R4 3 0.118 1 0.039 2.4 0.094 M2.6 x 0.45 0.018 7 0.276 1,000 39.370 19.7 0.776 (2.5)(0.098) o2.6 o0.102 (o4.33)(o0.170) (30) 10.2 (1.181) 0.402 Tough Fiber Free-cut <with FX-AT5> <with FX-AT2> 20 0.787 12 0.472 New product introduction <with FX-AT3> 3.5 0.138 o1.5 o0.059 fiber core x 1 3 0.118 13 0.512 12 0.472 o3 o0.118 M4 x 0.7 0.028 Screw tightening face 2,000 78.740 o2.2 o0.087 (Fluorine resin) Opposing faces 7 0.276, thickness 2.4 0.094 Toothed lock washer o8.5 o0.335 INDEX Earlier models comparison table 36 New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Dimensions are listed in the order of thru-beam type, retroreflective type, and reflective type, and in alphabetic order of the model No. Thru-beam type fibers FT-H20-J20-SFT-H20-J30-SFT-H20-J50-S Free-cut (Note) <with FX-AT3> Heat-resistant side unit diagram (side view) 3 0.118 2.5 0.098 M2.6 x 0.45 0.018 M4 x 0.7 0.028 End bracket [Brass (nickel plated)] B (25.8) (1.016) 17 0.669 6 0.236 Cylindrical Type 20 0.787 o2.2 o0.087 (o4.0) (o0.157) Model No. tube (PVC) M4 x 0.7 0.028 Opposing faces 7 0.276, o1 o0.039 fiber core x 1 (Acrylic) thickness 3.2 0.126 Outer sheath o2.2 o0.087 (Polyethylene) (Polypropylene) Small Spot Model No. A B 185 +30 0 Wide Beam FT-H20-J20-S 200 +25 0 Convergent Reflective Type FT-H20-J30-S 300 +25 11.811 +0.984 0 0 285 +30 11.221 +1.181 0 0 FT-H20-J50-S 500 +25 19.685 +0.984 0 0 +1.181 485 +30 0 19.095 0 Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Reflective Type FT-H20-M1 3.5 0.138 FX-100 series INDEX Earlier models comparison table 9.3 0.366 o3.5 o0.138 5.4 0.213 Lock nut (polycarbonate) Ordinary temperature side fiber (FT-FM2) connection diagram (front view) 8 0.315 2.2 0.087 2,000 78.740 (25.8) (1.016) 20 17 0.787 0.669 6 0.236 M4 x 0.7 0.028 B 24 0.945 12 0.472 Set screw tightening range o2.2 o0.087 Head [Brass (Nickel plated)] (o4.0) (o0.157) Model No. tube (PVC) Spring washer [Stainless steel (SUS)] Opposing faces 7 0.276, o1 o0.039 fiber core x 1 (Acrylic) thickness 3.2 0.126 Holder Outer sheath o2.2 o0.087 (Polyethylene) (Polypropylene) [Brass (Nickel plated)] Prism (BK7) Model No. A B FT-H20-VJ50-S 500 +25 19.685 +0.984 0 0 +1.969 800 +50 31.496 0 0 485 +30 19.095 +1.181 0 0 +55 785 0 30.906 +2.165 0 FT-H20-VJ80-S Note: Ordinary temperature side fiber (FT-FM2) only. <with FX-AT2> 1,000 39.370 Heat & cold-resistant Ordinary temperature specifications specifications 150 5.906 12 0.472 16.7 0.657 o5 o0.197 Fixing bracket [Brass (nickel plated)] Screw tightening face M2.6 x 0.45 0.018 M4 x 0.7 0.028 3 0.118 18.3 0.720 o2.2 o0.087 o2.9 o0.114 (Silicone) o4 o0.157 [Brass (Nickel plated)] o1.1 o0.043 fiber core bundle x 1 3.5 0.138 Screw tightening face Fixing plug (PA) Opposing faces 7 0.276, thickness 2.4 0.094 Toothed lock washer o8.5 o0.335 FT-H30-M1V-S o4 o0.157 1,000 39.370 o0.8 o0.031 fiber core bundle x 1 End bracket [Stainless steel (SUS)] Toothed lock washer o7.6 o0.299 [Stainless steel (SUS)] 11 0.433 o3.6 o0.142 Heat & cold-resistant Ordinary temperature specifications specifications o1.6 o0.063 150 5.906 19.5 0.768 10 0.394 o2.2 o0.087 o4.33 o0.170 (PA) Protective tube (PTFE) Opposing faces 7 0.276, thickness 2.4 0.094 Toothed lock washer o8.5 o0.335 Mounting cap nut opposing faces 8 0.315 [Stainless steel (SUS)] Joint [Stainless steel (SUS)] Liner+braid tube [Stainless steel (SUS)] 2,000 78.740 Heat & cold-resistant Ordinary temperature specifications specifications 17 0.669 M2.6 x 0.45 0.018 M4 x 0.7 0.028 o1.2 o0.047 fiber core bundle x 1 150 5.906 27 1.063 17 0.669 2,000 78.740 16.7 0.657 18.3 0.720 o2.2 o5 o0.197 Fixing bracket o0.087 [Brass (nickel plated)] o2.9 o0.114 [Stainless steel (SUS)] Fixing plug (PA) o4 o0.157 [Stainless steel (SUS)] Opposing faces 7 0.276, thickness 2.4 0.094 [Stainless steel (SUS)] Toothed lock washer o8.5 o0.335 [Stainless steel (SUS)] 18.3 0.720 Free-cut <with FX-AT3> Heat & cold-resistant Ordinary temperature specifications specifications 150 5.906 16.7 0.657 o2.2 o2.9 o0.114 o0.087 [Stainless steel (SUS)] Fixing plug (PA) o4 o0.157 [Stainless steel (SUS)] o5 o0.197 Fixing bracket [Brass (Nickel plated)] Opposing faces 7 0.276, thickness 2.4 0.094 [Stainless steel (SUS)] Toothed lock washer o8.5 o0.335 [Stainless steel (SUS)] FT-HL80Y 60 2.362 M4 x 0.7 0.028 [Stainless steel (SUS)] 27 1.063 4 0.157 FT-H35-M2S6 o3 o0.118 [Stainless steel (SUS)] M4 x 0.7 0.028 o4 o0.157 Note: The FT-H30-M1V-S is a set with the FT-H30-M1V, photo-terminal FV-BR1, and atmospheric side fiber FT-J8. Refer to p.51 for dimensions of the atmospheric side fiber and photo-terminals. o2.1 o0.083 [Stainless steel (SUS)] 1,000 39.370 o2.5 o0.098 M2.6 x 0.45 0.018 3 0.118 30 1.181 Opposing faces 7 0.276, thickness 3.2 0.126 [Stainless steel (SUS)] o1.2 o0.047 fiber 5 core bundle x 1 0.197 20 0.787 FT-H35-M2 30 1.181 17 0.669 M2.6 x 0.45 0.018 M4 x 0.7 0.028 FX-500 series 20 0.787 3 0.118 3 0.118 2.5 0.098 o2.7 o0.106 Liner + braid tube [stainless steel (SUS304)] Joint bracket [Brass (nickel plated)] FT-H20W-M1 Others Amplifiers 7.284 +1.181 0 Note: Ordinary temperature side fiber (FT-FM2) only. Thru-beam Type Retroreflective Type 7.874 +0.984 0 (100) (3.937) o3.8 o0.150 2,000 78.740 Spring washer [Stainless steel (SUS)] Flat Type Heat-resistant side unit diagram (side view) Beam axis o4 o0.157 Opposing faces7 0.276, 5.4 o3.5 o0.138 thickness 2.4 0.094 0.213 Lock nut (polycarbonate) Toothed lock washer o2.7 o0.106 Liner + braid tube [Stainless steel (SUS304)] o8.5 o0.335 Free-cut (Note) <with FX-AT3> 24 A 0.945 Heat & cold-resistant Ordinary temperature specifications specifications Ordinary temperature side fiber (FT-FM2) connection diagram (front view) Sleeve FT-H20-VJ50-SFT-H20-VJ80-S 23 0.906 A 12 Joint bracket 0.472 [Brass (nickel plated)] Heat & cold-resistant Ordinary temperature specifications specifications 9.3 o4 o0.157 (100) (3.937) 0.366 Threaded Type Narrow Beam Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. DIMENSIONS (Unit: mm in) (25) (0.984) o5.5 o0.217 1,500 59.055 2,000 78.740 500 19.685 (Allowable cutting range) o2.2 o0.087 (o4) (o0.157) protective tube (Fluorine resin) 37 DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retroreflective type, and reflective type, and in alphabetic order of the model No. Thru-beam type fibers FT-KS40 Free-cut FT-KV26 8 0.315 2,000 78.740 (Set screw tightening range) (30) o1 o0.039 (1.181) Beam axis (o2) (o0.079) Model No. tube(PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) o3.5 o0.138 o3.7 o0.146 Holder(PC) End bracket [Stainless steel(SUS303)] 1.5 1.3 0.059 0.051 (0.5) (0.020) Prism(PC) 2,000 78.740 4-C0.15 C0.006 (30) (1.181) o1 o0.039 Choose by shape/ application Viewing new models (o2)(o0.079)Model No. tube(PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) End bracket [Stainless steel (SUS303)] 2 0.079 Fiber Selection Guide Choose by model Mounting reference surface 20 0.787 18 0.709 39 o1 0.0 o Beam axis 1.7 0.067 Tough Fiber Free-cut <with FX-AT4> <with FX-AT4> 20 0.787 New product introduction Fibers FT-KV40, FT-KV40W Free-cut o o0 4 .15 7 <with FX-AT4> Prism(PC) <with FX-AT3> (25) (0.984) o1 o0.039 (30) (1.181) 3 0.118 o2.5 o0.098 Holder (PC) Free-cut 2,000 78.740 25 0.984 3.7 0.146 FT-L80Y (o2)(o0.079) Model No. tube (PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) Enclosure (LCP) 2,000 78.740 1,500 59.055 500 19.685 (Allowable cutting range) Prism (PC) 3 0.118 3.3 0.130 o2.2 o0.087 (o4) (o0.157) protective tube (Fluorine resin) o5.5 o0.217 Small Spot FT-KS40 Wide Beam Convergent Reflective Type o1 o0.039 Retroreflective Type Chemicalresistant 2.5 R0. Enclosure (LCP) 5 0.197 5 0.197 2-R C1 C0.039 098 Mounting bracket [Stainless steel(SUS304)] 4.1 0.161 Narrow Beam (o2)(o0.079) Model No. tube(PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) R 6.5 0.256 4.7 0.185 o2.5 o0.098 6.5 0.256 Holder (PC) FT-R40 Heatresistant Free-cut Vacuumresistant FT-R41W Free-cut FT-KV25 <with FX-AT3> 2.4 0.094 97 .1 9 R0 .03 R5 1 0 5 0.197 o2.7 o0.106 (30) (1.181) 90 12 0.472 1 0.039 3 0.118 o2.2 o0.087 o2 o0.079 Mounting reference surface (Screw periphery) 9 0.354 Enclosure [Zinc die-cast (ZDC2)] 7 0.276 o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) (o3.2) (o0.126) Model No. tube (PVC) Fixing bracket [Stainless steel(SUS303)] Toothed lock washer M4 [Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] -0.004 o4 o0.157 -0.1 -0.13 -0.005 o8.5 o0.335 <with FX-AT3> Liquid Leak / Liquid Detection 2,000 78.740 25 0.984 20 0.787 5 o1.2 o0.047 Stainless pipe [Stainless steel(SUS304)] Cylindrical Type Sleeve 2,000 78.740 3.2 0.126 3.2 0.126 (30) 3.3 (1.181) 0.130 Threaded Type Flat Type Assembly dimensions with MS-FD-3 (attached mounting bracket) 25 0.984 10 0.394 Super Quality 4.4 0.173 1 0.039 9.5 0.374 8 0.315 2.4 0.094 M4 x 0.7 0.028 7 0.276 o8.5 o0.335 3.2 0.126 M4 x 0.7 0.028 Fiber Options 2,000 78.740 6 0.236 (30) (1.181) (o3.2) (o0.126) Model No. tube (PVC) Toothed lock washer M4[Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] o2.2 o0.087 o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) M2.6 x 0.45 0.018 Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others 7 0.276 3.2 0.126 FT-R42W Free-cut Amplifiers FT-S11 <with FX-AT3> 7 0.276 8 0.315 2.4 0.094 M4 x 0.7 0.028 Enclosure [Zinc die-cast (ZDC2)] 6 0.236 FT-KV40W 4.4 0.173 1 0.039 10 0.394 0.5 0.020 Lens (PMMA) o8.5 o0.335 3.2 0.126 9 0.354 3 Set screw tightening range 0.118 2,000 78.740 (30) (1.181) (o3.2) (o0.126) Model No. tube (PVC) Toothed lock washer M4 [Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] 7 0.276 <with FX-AT2> o2.2 o0.087 o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) 6 0.236 500 19.685 FX-100 series 19.5 0.768 (30) (1.181) 10 0.394 o2.2 o0.087 (o4.33) (o0.170) o1 o0.039 End bracket [Stainless steel(SUS303)] o0.25 o0.010 fiber core x 1 (PMMA) Sheath o0.7 o0.028 (Polyethylene) FX-500 series Resin plug (PA) (o1.5) (o0.059) Model No. tube (PVC) INDEX FT-R41W Earlier models comparison table 38 New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type DIMENSIONS (Unit: mm in) FT-S20 FT-S21 Free-cut <with FX-AT4> <with FX-AT2> 2,000 78.740 Resin plug (ABS) (20) (0.787) 8 0.315 2 0.079 Set screw 3 tightening range 0.118 o1 o0.039 (19.7) (0.776) o1 o0.039 10.2 0.402 (0.3) (0.012) o1 (o4.33)(o0.170) o2.2 o1.8 o0.039 o0.087 o0.071 (o2) (o0.079) Model No. tube (PVC) o1.5 o0.591 Mounting reference surface (Periphery) End bracket [Stainless steel(SUS303)] FT-S21W Free-cut 2 0.079 8 0.315 2,000 78.740 3 0.118 (Set screw tightening range) o1 o0.039 (30) (1.181) o1.5 o0.591 -0.07 -0.003 -0.1 -0.004 Mounting reference surface (Periphery) (o2) (o0.079) Model No. tube (PVC) o0.5 o0.020 Fiber core x 1 (Acrylic) Sheath o1.0 o0.039 (Polyethylene) End bracket [Stainless steel(SUS303)] FT-S30 <with FX-AT4> 8 0.315 2 0.079 2,000 78.740 (Set screw tightening range) 3 0.118 Sleeve Flat Type Narrow Beam Dimensions are listed in the order of thru-beam type, retroreflective type, and reflective type, and in alphabetic order of the model No. Thru-beam type fibers Cylindrical Type Small Spot Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. (30) (1.181) o1 o0.039 2 0.079 Mounting reference surface (Screw periphery) Set screw 5 tightening range 0.197 o1 o0.039 (o2) (o0.079) Model No. tube (PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) End bracket [Stainless steel(SUS303)] -0.003 o1.5 o0.059 -0.07 -0.1 -0.004 <with FX-AT2> 2,000 78.740 Resin plug (ABS) (20) (0.787) 8 0.315 o2 o0.079 (19.7) (0.776) 10.2 0.402 (0.3) (0.012) (o4.33)(o0.170) o2.2 o1.8 o2.2 o0.087 o0.087 o0.071 (o3.2) (o0.126) Model No. tube (PVC) o3 o0.118 Mounting reference surface (Periphery) End bracket [Stainless steel(SUS303)] Wide Beam Convergent Reflective Type FT-S31W Free-cut Retroreflective Type Chemicalresistant Liquid Leak / Liquid Detection Free-cut <with FX-AT3> 8 2,000 78.740 0.315 (Set screw tightening range) 5 o2.2 o0.087 0.197 (30)(1.181) 2 0.079 Heatresistant Vacuumresistant FT-S32 <with FX-AT3> Screw tightening range (excluding crimping part) o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) Mounting reference surface (Periphery) o2 o0.079 2 0.079 o2 o0.079 (o3.2) (o0.126) Model No. tube(PVC) -0.003 o3 o0.118 -0.07 -0.1 -0.004 8 0.315 End bracket [Stainless steel(SUS303)] 2,000 78.740 o2.2 o0.087 (30) (1.181) Lens (PMMA) o2.5 o0.098 End bracket [Stainless steel(SUS303)] Crimping part (o3.2)(o0.126) Model No. tube (PVC) o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) Fiber Options FT-V23 Free-cut Fiber Dimensions Retroreflective Type 1.1 0.043 Reflective Type Others Amplifiers FX-500 series INDEX Free-cut Set screw tightening range <with FX-AT4> View A 15 0.591 20 0.787 o1 o0.039 A 2,000 78.740 (30) o1.3 o0.051 (1.181) (o2.5) (o0.098) Model No. tube (PVC) o0.75 o0.030 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) FT-V25 Free-cut 1.8 0.071 1 0.039 2 0.02 55 o o0. Beam axis 10 0.394 Set screw tightening range Beam axis 15 0.591 o1 A o0.039 15 0.591 o2 o0.079 Sleeve[Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] FT-S32 2,000 78.740 (30) (1.181) o1 o0.039 (o2) (o0.079) Model No. tube (PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) FT-V30 Free-cut <with FX-AT4> View A 1.8 0.071 1 0.039 10 0.394 Set screw tightening range Beam axis 15 0.591 FT-S31W 15 0.591 o2 o0.079 A Sleeve [Stainless steel(SUS304)] Earlier models comparison table 10 0.394 o2 o0.079 Sleeve [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] o o0 0.5 .0 5 22 FX-100 series 1.8 0.071 View A o o0 0.8 .0 31 Thru-beam Type FT-V24W <with FX-AT5> o1 o0.039 End bracket [Stainless steel(SUS303)] FT-V23 2,000 78.740 (30) o1 o0.039 (1.181) (o2) (o0.079) Model No. tube (PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) <with FX-AT3> 1.3 0.051 View A .1 o1 3 o 4 0.0 2.3 0.091 10 Set screw tightening range 0.394 Beam axis 20 0.787 o1.5 o0.059 A FT-V24W o2.5 Sleeve [Stainless steel(SUS304)] o0.098 End bracket [Stainless steel(SUS303)] 15 0.591 2,000 78.740 (30) (1.181) o2.2 o0.087 (o3.2) (o0.126) Model No. tube(PVC) o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) 39 DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retroreflective type, and reflective type, and in alphabetic order of the model No. Thru-beam type fibers FT-V40 Free-cut FT-V80Y <with FX-AT3> 7 o o0 4 .1 5 3.7 0.146 3 0.118 (8) (0.315) Prism (PC) 12 0.472 2,000 78.740 (Set screw tightening range) (30) (1.181) o2.5 o0.098 FT-WZ4 Free-cut 3.5 2 0.079 0.138 1.2 0.047 <with FX-AT4> 7 0.276 1,000 39.370 o2.2 o0.087 hole, o3.6 o0.142 spot facing, 1.4 0.055 deep Inner pipe [Stainless steel (SUS)] 5 0.197 10 0.394 o1.5 Enclosure o0.059 (Polycarbonate) Beam axis mark o1 o0.039 Prism (Acrylic) (o2 o0.079) Model No. tube (PVC) Beam axis View A o5 o0.020 A Multi-core fiber (Fiber core: Acrylic, Sheath: Polyethylene) 1.05 0.041 Choose by shape/ application Viewing new models Fibers FT-WZ7 1 0.039 Free-cut <with FX-AT5> 3.5 0.138 7 0.276 7 0.276 3.5 0.138 1.2 0.047 2,000 78.740 o3.2 o0.126 hole, o5.6 o0.220 spot facing, 2.2 0.087 deep Inner pipe [Stainless Steel (SUS)] A o1.3 o0.051 Prism (Acrylic) Beam axis o2.4 Enclosure o0.094 (Polycarbonate) (o2) (o0.079) Model No. tube (PVC) Multi-core fiber (Fiber core: Acrylic, Sheath: Polyethylene) Free-cut 0.5 0.020 2 0.079 1.05 0.041 10 1,000 39.370 0.394 3.5 0.138 4-R1 R0.039 FT-Z30 Free-cut <Left> o1.5 o0.059 Beam axis Beam axis 0.5 3 0.118 0.020 1.75 0.069 8.5 3.9 0.154 0.335 Free-cut <Right> Reflector (PC) <with FX-AT5> 12 0.472 3.4 11 0.433 0.134 8 0.315 3.5 0.138 Beam axis 2 0.079 Reflector (PMMA) 1.75 0.069 Lens (PMMA) (o2.5) (o0.098) Model No. tube (PVC) 11 0.433 0.5 0.020 7.5 2-o2.2 o0.087 Hole 0.295 (30) (1.181) 5.5 0.217 2.2 0.087 12 Reflector (PC) 0.472 0.6 0.024 FT-Z30E 3 0.118 o0.75 o0.030 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) Enclosure (PC) 10 0.394 2.5 (o2.0) (o0.079) Model No. tube (PVC) 0.098 Inner pipe [Stainless steel(SUS304)] 1 o0.5 o0.020 fiber core x 1 (PMMA) 7 0.039 2.1 Sheath o1 o0.039 (Polyethylene) 0.083 0.276 5 0.197 <with FX-AT5> Enclosure(PC) o1 (30) (1.181) o0.039 2,000 78.740 (30) (1.181) o1.3 o0.051 2.2 0.087 8.5 0.335 (o2.5) (o0.098) 12 0.472 5.5 0.217 o1.3 o0.051 Center of beam axis 3.9 0.154 FT-Z30 FT-Z30H Free-cut <with FX-AT5> 3 0.118 12 2-o2.2 o0.087 0.472 3.4 11 Hole 0.433 0.134 8 0.315 3.5 0.138 2 0.079 Reflector (PMMA) 1.75 0.069 Lens (PMMA) FT-Z30E 2,000 78.740 (30) (1.181) o1.3 o0.051 (o2.5) (o0.098) o1 o0.039 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) Beam axis 5.5 0.217 7.5 0.295 (o2.5) (o0.098) Model No. tube (PVC) Enclosure (PC) <with FX-AT5> 3 0.118 8 0.315 Lens (PMMA) Narrow Beam Beam axis 12 0.472 3.4 11 0.433 0.134 3.5 0.138 5.5 2 0.079 0.217 7.5 1.75 0.295 0.069 Enclosure (PC) Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Thru-beam Type (o2.5) (o0.098) Model No. tube (PVC) Free-cut Small Spot Fiber Dimensions 2,000 78.740 o1.3 2-o2.2 o0.087 Hole o0.051 (30) (1.181) Enclosure (PC) FT-V40 FT-Z30EW Flat Type Fiber Options (o2.5) (o0.098) 4.3 0.169 2,000 78.740 (o2.5) (o0.098) 4.3 o0.75 o0.030 fiber core x 1 (PMMA) 0.169 1.75 7.5 Sheath o1.3 o0.051 (Polyethylene) 3 0.069 0.295 0.118 0.5 0.5 0.020 0.020 11 0.433 Beam axis Enclosure (PC) o0.75 o0.030 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) FT-Z20HBW 5.5 2-o2.2 o0.087 Hole 0.217 (o2.5) (o0.098) Model No. tube (PVC) 7.5 0.295 Cylindrical Type Convergent Reflective Type <with FX-AT4> o2.2 o0.087 Hole, o3.6 o0.142 spot facing deep 1.4 0.055 Threaded Type Wide Beam 1.05 0.041 Multi-core fiber o0.075 o0.003 x 151 FT-Z20HBW Super Quality Sleeve (20 0.787) 14 3.5 0.551 0.138 o1 View A o0.039 Multi-core fiber o0.0375 o0.001 x 151 Fiber Selection Guide Choose by model 500 19.685 (Allowable cutting range) o2.2 o0.087 (o4) (o0.157) protective tube (Fluorine resin) o5.5 o0.217 Sensing part (20 0.787) 2.5 0.098 2,000 78.740 1,500 59.055 (25) (0.984) 4.5 0.177 (o3.2) (o0.126) Model No. tube (PVC) o0.75 o0.030 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) End bracket [Stainless steel(SUS303)] Window name plate (Polyester) Holder (PC) 0.5 0.020 o2.2 o0.087 Tough Fiber Free-cut <with FX-AT3> 25 0.984 New product introduction 2,000 78.740 (30) (1.181) o1.3 o0.051 (o2.5) (o0.098) Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX o0.75 o0.030 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) 2-o2.2 o0.087 Hole (o2.5) (o0.098) Model No. tube (PVC) Earlier models comparison table 40 New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models DIMENSIONS (Unit: mm in) Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type FT-Z30HW Free-cut Vacuumresistant Liquid Leak / Liquid Detection 12 0.472 2,000 78.740 (30) 3.4 (1.181) 11 0.433 0.134 (o2.5)(o0.098) o1.3 o0.051 3 0.118 8 0.315 Beam 3.5 0.138 axis 2 0.079 5.5 0.217 Lens (PMMA) 1.75 0.069 Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table Free-cut 2-o2.2 o0.087 Hole 7.5 0.295 (o2.5) (o0.098) Model No. tube (PVC) FT-Z40HBW Free-cut <with FX-AT5> o3.2 o0.126 Hole, o5.6 o0.220 11 2,000 78.740 spot facing deep 2.2 0.087 0.433 3.5 0.138 4-R1 R0.039 1 0.039 3.5 0.138 Enclosure (PC) 1.05 0.041 (30) o1.3 o0.051 3.5 0.138 (1.181) 7 14 0.276 0.551 (o2.5) (o0.098) Model No. tube (PVC) 1.6 Inner pipe [Stainless steel(SUS304)] 0.063 7 2.7 0.106 o2.4 o0.094 0.276 Beam axis <with FX-AT5> <Left> o1 o0.039 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) Enclosure (PC) 3 0.118 Enclosure (PC) Beam axis 11 0.433 0.5 0.020 7.5 1.75 0.069 0.295 8.5 0.335 3.9 0.154 Reflector(PC) 2.2 0.087 Center of beam axis <Right> Reflector(PC) 8.5 0.335 3 0.118 2.2 0.087 FT-Z802Y 2,000 78.740 (5.8) (0.228) 15 0.591 7.5 0.295 <with FX-AT3> (7.3) (0.287) 13 0.512 6 FT-Z40HBW 0.236 7 0.276 Beam axis o2.2 o0.087 (o2.5) (o0.098) Model No. tube (PVC) 0.5 0.020 (30) (1.181) 4.3 0.169 (o2.5) (o0.098) FT-Z30W o1.3 o0.051 2-o2.2 o0.087 Hole 5.5 0.217 12 0.472 12 0.472 5.5 0.217 2,000 78.740 2,000 78.740 2-o2.2 o0.087 Hole (30) (1.181) 4.3 0.169 o1.3 o0.051 (o2.5) (o0.098) o1 o0.039 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) 0.5 0.020 7.5 0.295 11 0.433 Enclosure (PC) Beam axis 1.75 0.069 0.5 0.020 Free-cut 4 0.157 3 0.118 2-o3.2 o0.126 o1 o0.039 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) 3.9 0.154 o1 o0.039 x 1 fiber core (PMMA) 0.6 Sheath o1.3 o0.051 (Polyethylene) 0.024 FT-Z30HW (1) (0.039) Fiber Options FT-Z30W <with FX-AT5> Chemicalresistant Heatresistant Dimensions are listed in the order of thru-beam type, retroreflective type, and reflective type, and in alphabetic order of the model No. Thru-beam type fibers Fibers Super Quality Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. (o2.5) (o0.098) Model No. tube (PVC) 41 DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retroreflective type, and reflective type, and in alphabetic order of the model No. Retroreflective type fibers FR-KZ22E Free-cut <with FX-AT4> Reflector 15.8 0.622 14.7 0.579 0.7 0.028 1.45 0.057 5 0.197 2-M1.4 x 0.3 0.012 Prism (PC) Choose by model Choose by shape/ application Viewing new models Fibers 2 0.079 (30) (1.181) 2-o1 o0.039 Beam-receiving side (Black) Beam-emitting 2 0.079 4 side (Gray) 0.157 (o2) (o0.079) Model No. tube (PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) Head block [Stainless steel(SUS303)] 2-M1.4 x 0.3 0.012 4 0.157 1.9 0.075 0.7 0.028 5 0.197 9 4 0.157 0.354 Assembly dimensions with MS-FD-2 (attached mounting bracket) 25 0.984 3 0.118 9.5 0.374 12.2 3.7 0.146 0.480 5 0.197 10.2 0.402 4 0.157 6 0.236 FR-KZ50H 21 0.827 2,000 78.740 (30) 2-o1 o0.039 (1.181) (3.7) (0.146) Beam axis Enclosure(ABS) 19 28 1.102 0.748 9.5 0.374 12.2 3.7 0.146 0.480 5 0.197 10.2 0.402 Beam axis Reflector RF-003 10 0.394 (Effective reflector width) 10 0.394 (Effective reflector width) (2-R) Reflector (Norbornene resin) 1 0.039 Cover[Stainless steel (SUS304)] 3.3 0.130 3.2 0.126 4 0.157 14 0.551 7 0.276 4.3 0.169 10.1 0.398 Fiber 1 0.039 15 0.591 10.6 0.417 Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection 10 0.394 (Effective reflector width) (2-R) 1 0.039 4.3 0.169 Reflector (Norbornene resin) 2-o2.2 o0.087 1 0.039 2,000 78.740 15 0.591 2-M3 x 0.5 0.020 Lens (BK7) 9.5 0.374 12.2 0.480 5 0.197 10.2 0.402 4 0.157 3.3 0.130 1.2 0.047 6 0.236 Beam axis 14 0.551 7 0.276 Thru-beam Type Reflective Type Others o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) Assembly dimensions with MS-FD-2 (attached mounting bracket) 4.6 0.181 Fiber Dimensions Retroreflective Type Enclosure(PC) 5.2 0.205 Beam axis FR-KZ50E 10 0.394 (Effective reflector width) 2,000 78.740 4.6 0.181 9.5 0.374 o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) 5 0.197 1.1 0.043 3.2 0.126 Free-cut <with FX-AT3> (Accessory for FR-KZ50H) Amplifiers FX-500 series FX-100 series 3.3 0.130 MS-FD-2 Mounting bracket [Stainless steel(SUS304)] 4 0.157 2-o2.2 o0.087 Enclosure(PC) 5.2 0.205 INDEX o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) Reflective tape RF-13 (Accessory for FR-Z50HW) 0.5 0.020 FR-Z50W Rear surface (pressure-sensitive adhesive) 30 1.181 30 1.181 Reflective surface (Acrylic) FR-KZ50H Convergent Reflective Type Fiber Options FR-Z50HW Lens (BK7) Enclosure(ABS) Cover[Stainless steel (SUS304)] Wide Beam 3.3 0.130 2-M3 x 0.5 0.020 MS-FD-2 Mounting bracket [Stainless steel(SUS304)] 5.2 0.205 28 19 1.102 0.748 Sleeve Retroreflective Type (o2) (o0.079) Model No. tube (PVC) 4 0.157 1.2 0.047 6FR-KZ22E 0.236 (3.7) (0.146) 10.6 0.417 5 0.197 1.1 0.043 Assembly dimensions with MS-FD-2 (attached mounting bracket) 2,000 78.740 (30) 2-o1 o0.039 (1.181) Cylindrical Type Small Spot (Accessory for FR-KZ50E) 10.1 0.398 Threaded Type Flat Type o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) Reflector RF-003 Super Quality Narrow Beam Prism (PC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) 2-o1 o0.039 2-M3 x 0.5 0.020 MS-FD-2 Mounting bracket [Stainless steel(SUS304)] 4 0.157 14 0.551 7 0.276 Beam axis (2-R) 21 0.827 (30) (1.181) 3.3 0.130 (o2) (o0.079) Model No. tube (PVC) Enclosure (ABS) (3.7) (0.146) 5.2 0.205 <with FX-AT4> 5.2 0.205 2,000 78.740 (o2) (o0.079) Model No. tube (PVC) 3.3 0.130 1.2 0.047 Free-cut Fiber (2-R) (o2) (o0.079) Model No. tube (PVC) Fiber Selection Guide o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) Beam axis 2,000 78.740 21.5 0.846 7.5 .039 0.295 ) o0 1.5 (2-o1 0.059 2 0.079 3.7 0.146 2,000 78.740 (30) 2-o1 o0.039 (1.181) (3.7) (0.146) Enclosure (ABS) Reflector (PMMA) 11.2 0.441 Prism (PC) 1.5 0.059 2 0.079 9.5 0.374 25 0.984 3 0.118 3.7 0.146 9.5 0.374 Mounting bracket [Stainless steel(SUS303)] Beam axis 2 0.079 5.2 0.205 Base (ABS) 2.2 0.087 1 0.039 Fiber Tough Fiber Free-cut <with FX-AT4> 1.95 0.077 11 9 7.5 0.433 0.354 0.295 Fiber FR-KZ50E New product introduction Earlier models comparison table 42 Tough Fiber Fiber Selection Guide FD-30 Super Quality Threaded Type FD-31 2 o6.5 0.079 o0.256 2.7 0.106 o2 o0.079 Choose by shape/ application Fibers Dimensions are listed in the order of thru-beam type, retroreflective type, and reflective type, and in alphabetic order of the model No. Reflective type fibers Choose by model Viewing new models Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. DIMENSIONS (Unit: mm in) New product introduction 10 0.394 o3 o0.118 Mounting reference surface (Screw periphery) End bracket [Stainless steel(SUS303)] Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS)] Free-cut <with FX-AT2> 2,000 78.740 Resin plug(ABS) 1.8 0.071 (20) (0.787) o6.5 o0.256 (19.7) (0.776) 10.2 0.402 o1 M3 x 0.5 o0.039 (o4.33) 0.020 (o0.170) Toothed lock washer M3 [Stainless steel(SUS)] (0.3) (0.012) o2.2 o1.8 o0.087 o0.071 (o2) (o0.079) Model No. tube (PVC) 2 0.079 2.7 0.106 Free-cut Sleeve 2.7 0.106 Flat Type 2 0.079 10 0.394 1.8 0.071 o2 End bracket o0.079 [Stainless steel(SUS303)] Wide Beam (o2) (o0.079) Model No. tube (PVC) M3 x 0.5 0.020 Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] Narrow Beam Fiber Options FD-32GX Free-cut 18 0.709 12 0.472 1.2 0.047 o4.5 o0.177 o2.3 o0.091 o6.5 o0.256 5.5 0.217 M3 x 0.5 0.020 End bracket [Stainless steel (SUS303)] Toothed lock washer M3[Stainless steel (SUS304)] (2.5) (0.098) o3.8 o0.150 Earlier models comparison table 1.8 0.071 o1 o0.039 Beam-emitting side (o2) (o0.079) Model No. tube(PVC) Beam-receiving side o2.3 o0.091 Details of M3 x 0.5 sensing part 0.020 2.8 0.110 o3 o0.118 Sheath o1.3 o0.051 o1.3 o0.051 (Polyethylene) End bracket [Stainless steel(SUS303)] Sheath o1 o0.039 (Polyethylene) Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] Toothed lock washer M3 [Stainless steel(SUS304)] FD-40 (2.5) (0.098) (30) (1.181) o1.3 o0.051 Crimping part FD-31W (o5.1) (o0.201) Model No. tube(PVC) Beam-receiving side Sheath o1 o0.039 (Polyethylene) Sheath o1.3 o0.051 (Polyethylene) Intermediate fixing bracket [Stainless steel(SUS303)] Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] <with FX-AT2> 2 700 27.559 (Allowable cutting range) o4.5 o1 Beam-emitting o0.177 o0.039 side 2,000 78.740 Resin plug(ABS) 2.4 (20) 0.094 (0.787) 12 0.472 o8.5 0.079 o0.335 3.5 0.138 o2.5 o0.098 o4 o0.157 Mounting reference surface (Screw periphery) End bracket [Brass(Nickel plated)] Opposing faces 7 0.276 thickness 2.4 0.094 [Brass(Nickel plated)] M4 x 0.7 0.028 (19.7) (0.776) 10.2 0.402 (0.3) (0.012) o2.2 o1.8 o1 o0.087 o0.071 o0.039 (o4.33) (o0.170) (o2) (o0.079) Model No. tube (PVC) Toothed lock washer M4 [Brass(Nickel plated)] Protective tube (Polyolefin tube included SUS304 spiral tube) FD-41 o8.5 o0.335 Amplifiers INDEX 2,000 78.740 30 1.181 Beam-receiving o0.25 o0.010 fiber core x 9 (PMMA) Beam-emitting o0.5 o0.020 fiber core x 1 (PMMA) Others FX-100 series 1,000 39.370 300 11.811 6 0.236 Crimping part Thru-beam Type FX-500 series 17 0.669 12 0.472 <with FX-AT6> Fiber Dimensions Reflective Type 1.2 0.047 o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) Toothed lock washer M3 [Stainless steel(SUS304)] Details of sensing part Retroreflective Type Free-cut Beam-receiving o0.25 o0.010 fiber core x 9 (PMMA) Beam-emitting o0.5 o0.020 fiber core x 1 (PMMA) Chemicalresistant Liquid Leak / Liquid Detection M3 x 0.5 0.020 Toothed lock washer M3 [Stainless steel(SUS304)] <with FX-AT6> Convergent Reflective Type Vacuumresistant o0.5 o0.020 Fiber core x 1 (Acrylic) Sheath o1 o0.039 (Polyethylene) FD-32G o6.5 o0.256 5.5 0.217 2,000 78.740 (30) (1.181) 2-o1 o0.039 Small Spot Heatresistant (o2) (o0.079) Model No. tube (PVC) o3 o0.118 -0.1 -0.004 -0.13 -0.005 Mounting reference surface (Screw periphery) End bracket [Stainless steel(SUS303)] <with FX-AT4> o6.5 o0.256 5.5 0.217 o1 o0.039 (30) (1.181) 1.8 0.071 o2 o0.079 Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] FD-31W Cylindrical Type Retroreflective Type 2,000 78.740 10 0.394 <with FX-AT4> Free-cut 2 0.079 3.5 0.138 FD-41S Free-cut <with FX-AT4> 12 0.472 o2.5 o0.098 2,000 78.740 2.4 0.094 (30) (1.181) o1 o0.039 (o2) (o0.079) Model No. tube (PVC) -0.1 -0.004 o4 o0.157-0.13 -0.005 Mounting reference surface (Screw periphery) End backet [Stainless steel(SUS303)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] Toothed lock washer M4 [Stainless steel(SUS304)] FD-32GX o0.5 o0.020 Fiber core x 1 (Acrylic) Sheath o1 o0.039 (Polyethylene) M4 x 0.7 0.028 FD-41SW Free-cut <with FX-AT4> o8.5 o0.335 7 0.276 3.5 10 0.138 0.394 40 1.575 12 0.472 5 Allowable 10 0.197 bending 0.394 range o2.5 o0.098 M4 x 0.7 0.028 Toothed lock washer M4 [Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] FD-32G o1.48 o0.058 Sleeve [Stainless steel(SUS304)] 2,000 78.740 2-o1 (30) o0.039 2.4 0.094 (1.181) (o2) (o0.079) Model No. tube(PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) FD-41W Free-cut <with FX-AT4> 3.5 0.138 o8.5 o0.335 7 0.276 40 1.575 10 0.394 Allowable bending range 10 0.394 5 0.197 12 0.472 o1.48 o2.5 o0.098 o0.058 Sleeve [Stainless steel M4 x 0.7 0.028 (SUS304)] Toothed lock washer M4 [Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] 2.4 0.094 2,000 78.740 2-o1 (30) o0.039 (1.181) (o2) (o0.079) Model No. tube(PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) <with FX-AT5> o8.5 o0.335 2 0.079 7 0.276 3.5 0.138 12 0.472 2.4 0.094 2,000 78.740 (30) (1.181) 2-o1.3 o0.051 o3 o0.118 End bracket [Stainless steel(SUS303)] Toothed lock washer M4 [Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] M4 x 0.7 0.028 (o2.5) (o0.098) Model No. tube(PVC) o1 o0.039 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) 43 DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retroreflective type, and reflective type, and in alphabetic order of the model No. Reflective type fibers FD-42G Free-cut FD-42GW 25 0.984 5 12 0.472 0.197 1.2 0.047 2,000 78.740 (30) (1.181) 2.4 0.094 o1 o0.039 o1.3 o0.051 o2.3 o0.091 Beam-receiving side (o2) (o0.079 ) Model No. tube (PVC) o4 o0.157 M3 x 0.5 0.020 M4 x 0.7 0.028 Beam-emitting side Sheath o1 o0.039 (Polyethylene) Toothed lock washer M4 [Stainless steel(SUS304)] o8.5 o0.335 7 0.276 1.2 0.047 25 0.984 5 0.197 12 0.472 2.4 0.094 M3 x 0.5 0.020 M4 x 0.7 0.028 Sheath o1.3 o0.051 (Polyethylene) 3.5 0.138 (30) (1.181) Details of sensing part Details of sensing part Fiber Selection Guide Choose by model o1 o0.039 Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] Toothed lock washer M4 [Stainless steel(SUS304)] 3.5 0.138 Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] 2,000 78.740 Beam-emitting side o1.3 o0.051 Beam-receiving side o4 (o2) (o0.079) Model No. tube (PVC) o0.157 Sheath o1 o0.039 (Polyethylene) Sheath o1.3 o0.051 (Polyethylene) End bracket [Stainless steel(SUS303)] o2.3 o0.091 End bracket [Stainless steel(SUS303)] Tough Fiber Free-cut <with FX-AT6> <with FX-AT6> o8.5 o0.335 7 0.276 New product introduction Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type Cylindrical Type Beam-receiving o0.25 o0.010 fiber core x 9 (PMMA) Beam-receiving o0.25 o0.010 fiber core x 9 (PMMA) Beam-emitting o0.5 o0.020 fiber core x 1 (PMMA) Beam-emitting o0.5 o0.020 fiber core x 1 (PMMA) Sleeve Flat Type Small Spot FD-60 FD-61 Free-cut <with FX-AT2> o11 o0.433 15 0.591 2 0.079 5.5 0.217 2 0.079 o4.5 o0.177 o6 o0.236 Mounting reference surface (Screw periphery) End bracket [Brass(Nickel plated)] Opposing faces 10 0.394 thickness 2 0.079 [Brass(Nickel plated)] 2,000 78.740 Resin plug(ABS) (20) (0.787) o11 o0.433 (19.7) (0.776) 10.2 0.402 (0.3) (0.012) o2.2 o1.8 o2.2 (o4.33) o0.087 o0.071 M6 x 0.75 o0.087 (o0.170) (o3.2) (o0.126) Model No. tube (PVC) 0.030 Toothed lock washer M6 [Brass(Nickel plated)] FD-61G 2 0.079 Free-cut 5.5 0.217 o4.5 o0.177 <with FX-AT3> 15 0.591 2 0.079 2,000 78.740 (30) (1.181) 2 0.079 o4.5 o0.177 15 0.591 2 0.079 (30) (1.181) 2,000 78.740 2-o2.2 o0.087 -0.1 -0.004 o6 o0.236-0.13 -0.005 Mounting reference surface (Screw periphery) End bracket [Stainless steel(SUS303)] Opposing faces 10 0.394 thickness 2 0.079 [Stainless steel(SUS304)] Toothed lock washer M6 [Stainless steel(SUS304)] (o3.2) (o0.126) Model No. tube (PVC) o1 o0.039 Fiber core x 1 (Acrylic) Sheath o2.2 o0.087 (Polyethylene) M6 x 0.75 0.030 Free-cut <with FX-AT3> (o3.2) (o0.126) Model No. tube (PVC) Hexagon nut M6 [Stainless steel(SUS304)] Details of sensing part Sheath o2.2 o0.087 (Polyethylene) Toothed lock washer M6 [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] M6 x 0.75 0.030 5.5 0.217 15 0.591 40 1.575 5.5 10 0.217 0.394 Allowable 5 0.197 bending 10 0.394 range o2.5 o0.098 Sleeve [Stainless steel(SUS304)] 2 0.079 o3.5 o0.138 M6 x 0.75 0.030 Toothed lock washer M6 [Stainless steel(SUS304)] Hexagon nut M6 [Stainless steel(SUS304)] 2,000 78.740 2-o2.2 o0.087 (30) (1.181) (o3.2) (o0.126) Model No. tube (PVC) o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) End bracket [Stainless steel(SUS303)] Free-cut 15 0.591 2 0.079 o4.5 o0.177 Hexagon nut M6 [Stainless steel(SUS304)] Toothed lock washer M6 [Stainless steel(SUS304)] Vacuumresistant Fiber Options Fiber Dimensions Retroreflective Type Reflective Type Others FX-500 series FD-62 Free-cut <with FX-AT3> 2 0.079 5.5 0.217 Heatresistant Amplifiers Beam-emitting o1 o0.039 fiber core x 1 (PMMA) o11 o0.433 10 0.394 Retroreflective Type Thru-beam Type Beam-receiving o0.25 o0.010 fiber core x 16 (PMMA) FD-61W Convergent Reflective Type Liquid Leak / Liquid Detection FD-61S o11 o0.433 10 0.394 Wide Beam Chemicalresistant <with FX-AT3> o11 o0.433 10 0.394 o2.2 o0.087 Narrow Beam 2,000 78.740 2-o2.2 o0.087 (30) (1.181) <with FX-AT3> o11 o0.433 10 0.394 5.5 0.217 (o3.2) (o0.126) Model No. tube (PVC) M6 x 0.75 0.030 o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) End bracket [Stainless steel(SUS303)] FX-100 series -0.1 -0.004 o6 o0.236-0.13 -0.005 2 0.079 15 0.591 2 0.079 o4.5 o0.177 Hexagon nut M6 [Stainless steel(SUS304)] Mounting reference surface (Screw periphery) Toothed lock washer M6 [Stainless steel(SUS304)] 2,000 78.740 2-o2.2 o0.087 (30) (1.181) INDEX (o3.2) (o0.126) Model No. tube (PVC) o1.5 o0.059 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) End bracket [Stainless steel(SUS303)] M6 x 0.75 0.030 Earlier models comparison table 44 New product introduction Tough Fiber Fiber Selection Guide FD-64X FD-A16 Cylindrical Type Sleeve Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection o3.8 o0.150 o4.5 o4.5 o0.177 o0.177 Protective tube Polyolefin tube included SUS304 spiral tube 22 0.866 2 15 0.079 10 0.591 0.394 Viewing new models Threaded Type Details of sensing part 5.5 0.217 2-o2.2 o0.087 4.5 0.177 5.1 0.201 (30) (1.181) (o5.1) (o0.201) Resin plug (ABS) 15 0.591 28 1.102 3.6 0.142 2 0.079 2,000 78.740 2-o2.2 o0.087 8 0.315 B Beam-receiving side 9 0.354 Beam axis 10.7 0.421 A Beam-emitting side Enclosure (PC) 7 0.276 11 11.6 7 0.276 0.433 0.457 Crimping part o11 o0.433 End bracket M6 x 0.75 0.030 (o5.1) (o0.201) Model No. tube (PVC) [Stainless steel(SUS303)] Hexagon nut M6 [Stainless steel(SUS304)] Toothed lock washer M6 [Stainless steel(SUS304)] o0.25 o0.010 fiber core x 9 (PMMA) (each beam-emitting part and beam-receiving part) FD-AL11 Free-cut Sheath o2.2 o0.087 (Polyethylene) View A View B Beam-emitting o1 o0.039 fiber core x 1 (PMMA) Beam-receiving o0.25 o0.010 fiber core x 16 (PMMA) FD-E13 <with FX-AT3> 20 0.787 13 0.512 5 0.197 2.5 0.098 Details of sensing part 2.5 0.098 1 0.039 o0.48 o0.019 2-o2.2 o0.087 15 0.591 3 0.118 5 0.197 o0.25 o0.010 x 16 fiber core (PMMA) Sheath o2.2 o0.087 (Polyethylene) 5 0.197 2-o2.2 o0.087 4.5 0.177 5.1 0.201 4 0.157 (Set screw tightening range) (30) o1.5 o0.059 o0.9 o0.035 (1.181) 2,000 78.740 2-M3 x 0.5 0.020 20 15 0.787 0.591 Head block (LCP) (o2.5) (o0.098) 1,000 39.370 6 0.236 (1) (0.039) 10.7 0.421 (3.1) (0.122) Enclosure (PPS) 7 11 11.6 0.276 0.433 0.457 10.85 0.427 Sleeve[Stainless steel (SUS304)] Resin plug (ABS) (o2.5) (o0.098) Model No. tube (PVC) (o0.9) (o0.035) Protective tube (Polyolefin) Details of sensing part Sensing part o0.25 o0.010 fiber core x 32 (emitter / receiver alternating line) End bracket [Stainless steel(SUS303)] o0.125 o0.005 fiber core x 2 (PMMA) (each beam-emitting part and beam-receiving part) FD-EG30 FD-E23 Fiber Dimensions Thru-beam Type o3 o0.118 Retroreflective Type o0.63 o0.025 Reflective Type 5 0.197 15 0.591 (30) (1.181) 1,000 39.370 6 0.236 (1) (0.039) End bracket [Stainless steel(SUS303)] Details of sensing part (30) (1.181) Resin plug (ABS) (o1.6)(o0.063) Protective tube (Polyolefin) (3.4) (0.134) FX-500 series 2-o2.2 o0.087 4.5 0.177 5.1 0.201 (o3) (o0.118) Amplifiers FX-100 series Lens (Norbornene resin) 2-o3.3 o0.130 1,000 39.370 6 0.236 (2.5) (0.098) (5.8) (0.228) 2 0.079 Fiber Options Others Free-cut <with FX-AT3> Choose by shape/ application Super Quality Dimensions are listed in the order of thru-beam type, retroreflective type, and reflective type, and in alphabetic order of the model No. Reflective type fibers Choose by model Fibers Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. DIMENSIONS (Unit: mm in) 5.5 1.2 0.217 0.047 10.7 0.421 Beam-receiving 7 11 11.6 side 0.276 0.433 0.457 Beam-emitting side (o3) (o0.118) Model No. tube (PVC) Sleeve[Stainless steel(SUS304)] 16 0.630 o6.5 o2.3 o0.256 o0.091 Details of sensing part 2.8 0.110 2-o2.2 o0.087 4.5 0.177 5.1 0.201 (o3) (o0.118) Resin plug (ABS) (o1.6) (o0.063)Protective tube (Polyolefin) 500 19.685 6 0.236 FD-E13 10.7 (1) (0.039) 0.421 1.8 (3.6) (0.142) 0.071 Beam-receiving 7 11 11.6 side 0.276 0.433 0.457 Beam-emitting side (o3) (o0.118) Model No. tube(PVC) M3 x 0.5 0.020 End bracket [Stainless steel(SUS303)] Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] Toothed lock washer M3 [Stainless steel(SUS304)] Beam-emitting o0.25 o0.010 fiber core x 1 (PMMA) Beam-receiving o0.125 o0.005 fiber core x 9 (PMMA) INDEX Beam-receiving o0.125 o0.005 fiber core x 9 (PMMA) Beam-emitting o0.25 o0.010 fiber core x 1 (PMMA) Earlier models comparison table 45 Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. DIMENSIONS (Unit: mm in) Dimensions are listed in the order of thru-beam type, retroreflective type, and reflective type, and in alphabetic order of the model No. Reflective type fibers FD-EG30S FD-EG31 2-o2.2 o0.087 (o3) (o0.118) Resin plug (ABS) (o1.6) (o0.063) Protective tube (Polyolefin) Sleeve [Stainless steel(SUS304)] 15 0.591 15 0.591 5.5 0.217 1.8 0.071 1,000 39.370 6 0.236 10.7 (1) (0.039) 0.421 (3.6) (0.142) Beam-receiving 7 11 11.6 side 0.433 0.457 Beam-emitting 0.276 M3 x 0.5 0.020 side (o3) (o0.118) Model No. tube(PVC) Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] Toothed lock washer M3 [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] o6.5 o0.256 Details of sensing part 2.7 0.106 Toothed lock washer M3[Stainless steel(SUS304)] Beam-emitting o0.125 o0.005 fiber core x 1 (PMMA) FD-F4 FD-F41 Free-cut <with FX-AT4> 500 19.685 2-o3.2 o0.126 mounting holes 5 0.197 (o3) (o0.118) Model No. tube (PVC) 14 0.551 o1 o0.039 x 2 (20) (0.787) 14 0.551 2,000 78.740 4 0.157 (4.44) (0.175) (1.0) (0.039) (o1.15) (o0.045) 13 0.512 2,000 78.740 (50) (1.969) Protective tube Range where cutting is not possible (17) Bending prohibited range (0.8) (0.669) (0.031) (10) Crimping part (0.039) o1 o0.039 x 2 Primary sheath: Polyethylene Secondary sheath: [PFA(fluorine resin)] Free-cut Emission indicator 5,000 196.850 3,000 118.110 30 1.181 7.8 0.307 Free-cut 10 20 0.394 0.787 Enclosure (PFA) 10 0.394 (26) (1.024) (Bending prohibited range) 16 8 0.315 0.630 Small Spot Narrow Beam Convergent Reflective Type Retroreflective Type Liquid Leak / Liquid Detection <with FX-AT3> Beam-emitting side (Gray) Beam-receiving side (Black) o0.25 o0.010 fiber core x 4 (PMMA) Sheath o1 o0.039 (Polyethylene) (o3.1) (o0.122) Protective tube (PFA) Cylindrical Type Vacuumresistant FD-F8Y 2-o1 o0.039 Threaded Type Heatresistant <with FX-AT4> Fiber Super Quality Chemicalresistant FD-EG31 FD-F71 Fibers Wide Beam (o4) (o0.157) Protective tube [PFA(fluorine resin)] 10 0.394 Viewing new models Flat Type Free-cut <with FX-AT4> 20 0.787 6 0.236 13.5 25 0.531 0.984 FD-F41Y Choose by shape/ application Sleeve Beam-receiving o0.125 o0.005 fiber core x 6 (PMMA) Beam-receiving o0.125 o0.005 fiber core x 9 (PMMA) 8 0.315 Choose by model 5.1 0.201 (o2.5) (o0.098) Resin plug (ABS) (o1.2)(o0.047) Protective tube (Polyolefin) 16 500 19.685 0.630 6 0.236 5.5 (1) (0.039) 1.3 0.051 1.8 10.7 0.217 0.421 0.071 (3.1) (0.122) Beam-receiving 7 11 11.6 side 0.276 0.433 0.457 Beam-emitting M3 x 0.5 0.020 side o6.5 o0.256 (o2.5) (o0.098) Model No. tube (PVC) End bracket [Stainless steel(SUS303)] Details of sensing part 2.8 0.110 Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] Beam-emitting o0.25 o0.010 fiber core x 1 (PMMA) Tough Fiber Fiber Selection Guide 2-o2.2 o0.087 4.5 0.177 (30) (1.181) o2.3 o0.091 4.5 0.177 5.1 0.201 (30) (1.181) o0.8 o0.031 New product introduction 1,000 39.370 1,000 39.370 (Allowable cutting range) Fiber Options Fiber Dimensions Thru-beam Type o2.2 o0.087 x 2 (o6) (o0.236) protective tube (Fluorine resin) 22 0.866 Retroreflective Type Reflective Type Others SUS mounting bracket 17 0.669 10 0.394 17.7 12.2 0.480 0.697 6.2 0.244 Assembly dimensions 0.3 0.012 5.5 0.217 11 0.433 o4.2 o0.165 thru-holes Material: PFA Material: Stainless steel (SUS316) 12 0.472 10 0.394 15.5 10.5 0.413 0.610 Free-cut <with FX-AT15A> 30 1.181 Details of sensing part 10 15 0.394 0.591 17 0.669 FD-F71 11.5 0.453 SUS mounting bracket (9.4) (0.370) 10.3 0.406 7.8 0.307 20.3 28.3 0.799 1.114 0.3 0.012 PVC mounting bracket FD-FA93 mounting holes (for tying band) 6.5 3 0.118 0.256 0.9 0.035 2.5 0.098 5.2 0.205 22.2 0.874 o0.25 o0.010 fiber core x 9 (PMMA) Sheath o1.3 o0.051 (Polyethylene) 30 1.181 5.7 0.224 10 0.394 4 0.157 11 Welding part 0.433 Material: PVC 2,000 78.740 25 0.984 FD-F71 11.5 0.453 10 0.394 PVC mounting bracket Sensing part (emitter / receiver alternating line) 17.1 0.673 (o0.25 o0.010 fiber core x 18) 2-o1.3 o0.051 3 0.118 FX-500 series FX-100 series INDEX Enclosure (ABS) 5.2 0.205 Assembly dimensions 8.75 0.344 Amplifiers 2.5 0.098 Earlier models comparison table 46 DIMENSIONS (Unit: mm in) New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retroreflective type, and reflective type, and in alphabetic order of the model No. Reflective type fibers FD-H13-FM2 Details of sensing part 16 0.630 15 0.591 5 0.197 5.5 0.217 o1.5 o0.059 fiber core x 2 Viewing new models Free-cut FD-H18-L31 <with FX-AT3> Screw tightening face o5 o0.197 M6 x 0.75 0.030 Fibers 7 0.276 10.75 0.423 2,000 78.740 o2.2 o0.087 x 2 (Fluorine resin) Opposing faces 10 0.394, thickness 2 0.079 Toothed lock washer o11 o0.433 Free-cut 20 0.787 6.5 0.256 2.7 0.106 <with FX-AT3> 2,000 78.740 A 19 0.748 8 0.315 4 0.157 5 0.197 Super Quality Threaded Type End bracket (Brass) 2-M3 x 0.5 0.020 Head [Stainless steel (SUS)] Holder [Stainless steel (SUS)] View A o4.6 o0.181 Cylindrical Type A o2.2 o0.087 x 2 (Fluorine resin) Emitter / Receiver fiber o1.5 o0.059 x 1 Sleeve Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant FD-H20-21 FD-H20-M1 Details of sensing part Beam-receiving part: o50 m o1.969 mil x 440 Beam-emitting part: o50 m o1.969 mil x 440 1,000 39.370 60 35 30 2.362 1.378 o3.1 1.181 16.7 18.3 o10 o0.122 0.657 0.720 o0.394 5 0.197 o5 o0.197 Emitter mark o4 o5 o0.197 o0.157 o2.9 o0.114 M4 x 0.7 Liner + braid tube Joint 0.028 [Stainless steel (SUS)] 27 1.063 20 0.787 5 0.197 o2.2 o0.087 Beamemitting side Beam3.5 receiving 0.138 side o3 o0.118 Toothed lock washer o8.5 o0.335 [Stainless steel (SUS)] Opposing faces 7 0.276, thickness 2.4 0.094 [Stainless steel (SUS)] Liquid Leak / Liquid Detection Heat & cold-resistant Details of specifications sensing part Ordinary temperature specifications Joint [Brass (Nickel plated)] Beam-receiving part: 28 1,000 inside diameter o1.1 o0.043 1.102 39.370 25 150 60 5 outside diameter o1.6 o0.063 18.3 16.7 5.906 0.984 2.362 0.197 0.657 0.720 Beamfiber core bundle x 1 15 5 0.591 0.197 receiving 5.5 D side 0.217 o2.2 o0.087 BeamP o9 o0.354 Screw emitting o6 o4.2 o0.165 (Silicone) tightening face side o0.236 Fixing plug (PA) o5 End bracket Beam-emitting part: o3.5 o0.197 Fixing bracket o0.138 [Brass (Nickel plated)] o1.1 o0.043 fiber [Brass (Nickel plated)] core bundle x 1 M6 x 0.75 Opposing faces 10 0.394, o2.9 o0.114 (Silicone) 0.030 thickness 2 0.079 Toothed lock washer o11 o0.433 Fiber Options Fiber Dimensions FD-H25-L43 33.2 1.307 21.7 0.854 Thru-beam Type Retroreflective Type Reflective Type Others FD-H25-L45 5 0.197 4.5 0.177 6.5 0.256 Heat-resistant specifications o2.9 o0.114 <with FX-AT2> 3,000 118.110 34.5 1.358 23 0.906 19.5 0.768 Ordinary temperature specifications (150) (5.906) 10 0.394 BeamA emitting side (o4.33) (o0.170) BeamA receiving side o2.2 o0.087 x 2 21 0.827 2 0.079 o3.8 o0.150 5 0.197 4.5 0.177 6.5 0.256 Heat-resistant specifications o2.9 o0.114 2 0.079 FX-500 series FX-100 series INDEX Earlier models comparison table Slit mask [Stainless steel(SUS)] Beam axis Fiber holder (Heat-resistant resin) Enclosure (Heat-resistant resin) o5 o0.197 (24.2) (0.953) View A o1.2 o0.047 (Beam-receiving fiber o1.5 o0.059) fiber core x 1 19.5 0.768 10 0.394 BeamA emitting side (o4.33) (o0.170) BeamA receiving side o2.2 o0.087 x 2 o3.8 o0.150 Tube [Stainless steel(SUS)] 2-mounting holes for M3 countersunk head screw Prism(BK7) Ordinary temperature specifications (150) (5.906) <with FX-AT2> 21 0.827 Tube [Stainless steel(SUS)] Amplifiers 3,000 118.110 2-mounting holes for M3 countersunk head screw Prism(BK7) Slit mask [Stainless steel(SUS)] Beam axis Fiber holder (Heat-resistant resin) Enclosure (Heat-resistant resin) o5 o0.197 (24.2) (0.953) View A o1.2 o0.047 (Beam-receiving fiber o1.5 o0.059) fiber core x 1 Resin plug(PA) Resin plug(PA) Fixing bracket [Brass(Nickel plated)] Fixing bracket [Brass(Nickel plated)] 47 DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retroreflective type, and reflective type, and in alphabetic order of the model No. Reflective type fibers FD-H30-KZ1V-S FD-H30-L32 21.7 (0.854 ) 15 0.591 1,000 39.370 30 1.181 11 0.433 o4 o0.157 Glass lens (BK7) o3.6 o0.142 9.5 0.374 End bracket [Stainless steel (SUS)] Enclosure [Stainless steel (SUS)] 4.6 0.181 2-o1 o0.039 vent holes 20 0.787 7 0.276 4 0.157 o4 o0.157 10.75 0.423 Mounting cap nut opposing faces 8 0.315 [Stainless steel (SUS)] Joint [Stainless steel (SUS)] 2,000 78.740 16.7 0.657 16.7 6.5 0.657 0.256 o5 o4 o2.9 o0.197 o0.157 o0.114 Liner + braid tube [Stainless steel (SUS)] Tube [Stainless steel (SUS)] o2.7 o0.106 5.2 0.205 Assembly dimensions with MS-FD-2 (attached mounting bracket) 12.2 0.480 10.2 0.402 9.5 0.374 4.6 0.181 t 1.2 t 0.047 4 0.157 Holder [Stainless steel (SUS)] View A o4.6 o0.181 Emitter / Receiver fiber o1.2 o0.047 fiber core x 1 4 0.157 3.3 0.130 14 0.551 FD-H30-L32V-S 6.5 0.256 o4 o0.157 10.75 0.423 (1.2 0.047) 19 0.748 8 0.315 o3.6 o0.142 30 1.181 11 0.433 Details of sensing part 4 0.157 o4 o0.157 Mounting cap nut opposing faces 8 0.315 [Stainless steel (SUS)] End bracket [Stainless steel (SUS)] Liner + braid tube 2-M3 x 0.5 0.020 Enclosure [Stainless steel (SUS)] [Stainless steel (SUS)] Holder [Stainless steel (SUS)] 4 0.157 o4.6 o0.181 3.4 (0.134 ) Chemicalresistant 90 3.543 5 0.197 10 Beam-receiving part: 0.394 o50 m o1.969 mil x 380 27 1.063 20 0.787 10 0.394 o4 o0.157 o2.1 o0.083 [Stainless steel (SUS)] o3 o0.118 1,000 39.370 35 60 1.378 30 2.362 16.7 18.3 1.181 0.657 0.720 o2.2 5 o0.087 0.197 o5 o0.197 o2.9 o0.114 Resin plug (PA) o10 o0.394 Joint o3.1 o5 o0.197 o0.122 M4 x 0.7 0.028 Liner + braid tube [Stainless steel (SUS)] Opposing faces 7 0.276, thickness 2.4 0.094 [Stainless steel (SUS)] Toothed lock washer o8.5 o0.335 [Stainless steel (SUS)] FD-H35-M2 Details of sensing part Heat & cold-resistant Ordinary temperature specifications specifications 3 22 2,000 Beam-receiving part: 0.118 0.866 78.740 inside diameter o1.8 o0.071 150 30 60 5 outside diameter o2.2 o0.087 5.906 1.181 2.362 0.197 17 fiber core bundle x 1 5 0.669 0.197 o4 o0.157 [Stainless steel (SUS)] M6 x 0.75 0.030 [Stainless steel (SUS)] FD-H35-M2S6 o2.8 o0.110 [Stainless steel (SUS)] o4 o0.157 [Stainless steel (SUS)] M6 x 0.75 0.030 [Stainless steel (SUS)] Toothed lock washer o11 o0.433 [Stainless steel (SUS)] o5 o0.197 o10 o0.394 Joint [Brass o3 o0.118 (Nickel plated)] (Silicone) Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Thru-beam Type Retroreflective Type 16.7 0.657 D o5 o0.197 o1.8 o0.071 fiber core bundle x 1 emitting and receiving Heatresistant Fiber Dimensions o2.7 o0.106 Heat & cold-resistant Ordinary temperature specifications specifications 2,000 22 60 78.740 0.866 2.362 60 5 30 150 2.362 0.197 1.181 5.906 5 17 5 0.197 0.669 0.197 Sleeve Flat Type Retroreflective Type Allowable bending range Beam-emitting part: o50 m o1.969 mil x 380 Note: The FD-H30-L32V-S is a set with the FD-H30-L32V, photo-terminal FV-BR1, and atmospheric side fiber FT-J8. Refer to p.51 for dimensions of the atmospheric side fiber and photo-terminals. Details of sensing part Threaded Type Convergent Reflective Type Joint [Stainless steel (SUS)] Rod prism (BK7) 5 0.197 3,000 118.110 Super Quality Wide Beam FD-H35-20S 16.7 (0.657 ) Fibers Narrow Beam Note: The FD-H30-KZ1V-S is a set with the FD-H30-KZ1V, photo-terminal FV-BR1, and atmospheric side fiber FT-J8. Refer to p.51 for dimensions of the atmospheric side fiber and photo-terminals. 20 0.787 Viewing new models Small Spot Mounting bracket (MS-FD-2) 7 0.276 [Stainless steel (SUS)] 5.2 0.205 7 0.276 Choose by shape/ application Cylindrical Type 3.3 0.130 6 0.236 End bracket [Stainless steel (SUS)] 2-M3 x 0.5 0.020 Head [Stainless steel (SUS)] 5 0.197 2-M3 x 0.5 0.020 o4 o0.157 15 0.591 Choose by model 18.3 0.720 A o2.2 o0.087 Fixing plug (PA) Fixing bracket [Brass (Nickel plated)] 4 0.157 Tough Fiber Fiber Selection Guide A 8 0.315 19 0.748 New product introduction Beam-emitting part: o1.3 o0.051 fiber core bundle x 1 16.7 0.657 Beamreceiving side o2.2 o0.087 Beamemitting side Fixing plug (PA) Fixing bracket [Brass (Nickel plated)] Opposing faces 10 0.394, thickness 2 0.079 [Stainless steel (SUS)] Toothed lock washer o11 o0.433 [Stainless steel (SUS)] o5 o0.197 [Stainless steel (SUS)] o10 o0.394 o3 o0.118 o5 o0.197 (Silicone) o3.8 o0.150 [Stainless steel (SUS)] FD-HF40Y 18.3 0.720 18.3 0.720 Reflective Type Others P Amplifiers FX-500 series FX-100 series Free-cut <with FX-AT4> o5 o0.197 INDEX 500 o2.2 o0.087 o3.8 o0.150 Fixing plug (PA) [Stainless steel (SUS)] o5 o0.197 Fixing bracket [Stainless steel (SUS)] [Brass (Nickel plated)] Opposing faces 10 0.394, thickness 2 0.079 [Stainless steel (SUS)] 19.685 (50) (1.969) Protective tube Range where cutting is not possible (4.44) (0.175) (1.0) (0.039) (0.8) (0.031) (o1.15) (o0.045) 2,000 78.740 (17) Bending prohibited range (0.669) (10) Crimping part (0.394) (o4) (o0.157) Protective tube [PFA(fluorine resin)] o1 o0.039 x 2 (Polyethylene) Earlier models comparison table 48 New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type DIMENSIONS (Unit: mm in) FD-L10 Free-cut 19 0.748 7 0.276 2 0.079 Lens (PMMA) 12 0.472 4.5 0.177 Slit mask [Stainless steel (SUS304-CSP-H)] 2.5 0.8 0.031 0.098 3 0.118 Enclosure (PC) 12 0.472 7 0.276 1.5 0.059 7.2 0.283 Enclosure (PC) 8 0.315 FD-L20H Free-cut <with FX-AT4> 14 0.551 1,000 39.370 2.5 0.098 (30) (5) (0.197) (1.181) 0.5 0.020 Lens (PMMA) FD-L21 Free-cut 21 0.827 6.5 7 0.256 0.276 3 0.118 24 0.945 16 0.630 Liquid Leak / Liquid Detection Fiber Options 2,000 78.740 2-mounting holes for M3 countersunk head screw 6 0.236 FD-L21W Free-cut <with FX-AT4> 3 0.118 2-o1 o0.039 o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) (19) (0.748) FD-L10 Enclosure (ABS) 21 0.827 6.5 7 0.256 0.276 2,000 78.740 2-mounting holes for M3 countersunk head screw 16 0.630 24 0.945 Front film (Polyester) 4 0.157 Beam axis (2) (0.079) 4 0.157 FD-L22A (19) (0.748) 0.5 o0.020 x 1 fiber ocore (Acrylic) Sheath o1 o0.039 (Polyethylene) Beam axis Front film (Polyester) (2) (0.079) Free-cut FD-L23 Free-cut <with FX-AT5> 29 1.142 6.5 18 0.709 2.5 0.098 0.256 17 0.669 <with FX-AT5> 2,000 78.740 2-o1.3 o0.051 (15.3) 10 0.394 (0.602) 12 0.472 2 0.079 Enclosure (ABS) 2-mounting holes for M3 countersunk head screw 3.8 0.150 Beam axis Others 2.5 0.098 Beam-emitting side (Gray) 29 1.142 6.5 18 0.709 0.256 18 0.709 Beam-receiving side (Black) 2-mounting holes for M3 countersunk head screw 3.8 0.150 Beam axis (4.88) (0.192) o0.25 o0.010 fiber core x 9 (PMMA) Sheath o1.3 o0.051 (Polyethylene) Enclosure (PC) FD-L30A Free-cut 2-mounting holes for M3 countersunk head screw 3.8 0.150 Beam axis FD-L21 Enclosure (ABS) o0.25 o0.010 fiber core x 9 (PMMA) Sheath o1.3 o0.051 (Polyethylene) 3 0.118 2-o1.3 o0.051 o0.25 o0.010 fiber core x 9 (PMMA) Sheath o1.3 o0.051 (Polyethylene) (1.95) (0.077) (1.8) (0.071) Free-cut <with FX-AT3> FD-L20H 3,000 118.110 Beam-emitting side (Gray) (17.3) (0.681) Beam-receiving side (Black) (5.3) (0.209) 20 0.787 Beam-emitting side (Gray) (16.3) (0.642) Beam-receiving (4.8) (0.189) side (Black) FD-L31A <with FX-AT5> 29 1.142 18 0.709 6.5 2.5 0.098 0.256 3,000 118.110 2-o1.3 o0.051 (1.8) (0.071) Amplifiers INDEX 2-o1 o0.039 Enclosure (ABS) Thru-beam Type Earlier models comparison table o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) <with FX-AT4> Heatresistant FX-100 series 2-o1 o0.039 Enclosure (ABS) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) 1.5 0.059 o1.6 o0.063 13 0.512 18 0.709 (o2) (o0.079) Model No. tube (PVC) Mounting holes for M2 countersunk head screw 2-o1 o0.039 Beam axis 2 0.079 2,000 78.740 2.5 0.098 3 8 2-o 0.11 o Prism (PC) Chemicalresistant FX-500 series o0.75 o0.030 fiber core x 1 (PMMA) 2,000 78.740 3.5 Sheath o1.3 o0.051 (Polyethylene) 0.138 o1.3 o0.051 o1 o0.039 Beam-receiving side (7) (0.276) Beam-emitting side o0.5 o0.020 x 1 fiber core (Acrylic) Sheath o1 o0.039 (Polyethylene) 0.6 2.9 0.024 0.114 2-mounting holes for M3 countersunk head screw Enclosure (PC) 3 0.118 Beam (1.15) (0.045) axis 2-mounting holes for M3 countersunk head screw Free-cut Wide Beam Reflective Type 19 0.748 7 0.276 2 0.079 Lens (PMMA) (1.15) (0.045) 0.5 0.020 Narrow Beam Retroreflective Type Free-cut <with FX-AT6> <with FX-AT4> Small Spot Fiber Dimensions o0.75 o0.030 fiber core x 1 (PMMA) 2,000 78.740 Sheath o1.3 o0.051 (Polyethylene) 3.5 0.138 o1.3 o0.051 o1 o0.039 Beam-receiving side (7) (0.276) Beam-emitting side o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) FD-L12W Flat Type Vacuumresistant FD-L11 <with FX-AT6> Sleeve Retroreflective Type Dimensions are listed in the order of thru-beam type, retroreflective type, and reflective type, and in alphabetic order of the model No. Reflective type fibers Cylindrical Type Convergent Reflective Type Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. 29 1.142 6.5 18 0.709 0.256 3,000 118.110 (2.1) (0.083) Beam-emitting side FD-L11 23.5 0.925 2-o2.2 o0.087 (19.4) (0.764) FD-L21W 2-mounting holes for M3 countersunk head screw 4.5 0.177 Beam axis Enclosure (ABS) Beam-receiving side o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) o0.25 o0.010 fiber core x 16 (PMMA) Sheath o2.2 o0.087 (Polyethylene) (2.3) (0.091) 49 DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retroreflective type, and reflective type, and in alphabetic order of the model No. Reflective type fibers FD-L32H Free-cut FD-R60 25 0.984 (8) (0.315) 15 0.591 15 0.591 7.5 0.295 7.3 0.287 25 0.984 20 0.787 2,000 78.740 M6 x 0.75 0.030 2-o3.2 o0.126 mounting holes o5.7 o0.224 spot facing deep 2.6 0.102 3-o3.2 o0.126 (0.5 0.020 deep, on both sides) 2 0.079 o4.5 o0.177 Hexagon nut M6 [Stainless steel (SUS304)] (30) Fixing bracket (1.181) [Stainless steel(SUS303)] (o3.2) (o0.126) Model No. tube (PVC) R51 o5 o0.197 R0.1970.039 o1.2 o0.047 5 0.197 o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) o1.2 o0.047 Stainless steel pipe 905 [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] 5 0.197 Toothed lock 13 washer M6 0.512 [Stainless steel (SUS304)] -0.1 -0.004 2 0.079 o6 o0.236-0.13 -0.005 Mounting reference surface (Screw periphery) FD-S21 10 0.394 (30) (1.181) o1 o0.039 o1.5 o0.059 2 0.079 8 0.315 5.1 0.201 (o2.5) (o0.098) 4.5 0.177 1,000 39.370 6 10.7 (1) (0.039) 0.236 0.421 (3.1) (0.122) End bracket [Stainless steel (SUS303)] 2 0.079 8 0.315 4 Set screw tightening range 0.157 o1 o0.039 Sheath o1 o0.039 (Polyethylene) Details of sensing part 2-o2.2 o0.087 o2 o0.079 7 11 11.6 0.276 0.433 0.457 Resin plug (ABS) (o2.5) (o0.098) Model No. tube (PVC) Viewing new models Fibers Super Quality Threaded Type Sleeve Flat Type <with FX-AT2> (Set screw tightening range) Choose by shape/ application Cylindrical Type o11 o0.433 FD-S30 4 0.157 Fiber Selection Guide Choose by model 2-o2.2 o0.087 2-o2.2 o0.087 o1.5 o0.059 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) Enclosure (ABS) Lens (Norbornene resin) <with FX-AT3> 4,000 157.480 4.5 0.177 (16.7) (0.657) Tough Fiber Free-cut <with FX-AT3> 30 1.181 6.5 0.256 New product introduction 2,000 78.740 Resin plug(ABS) (20) (0.787) o3 o0.118 Mounting reference surface (Periphery) Small Spot Narrow Beam Wide Beam (19.7) (0.776) 10.2 0.402 (0.3) (0.012) o2.2 o0.087 (o4.33) (o0.170) o1 o0.039 (o2) (o0.079) Model No. tube (PVC) o1.8 o0.071 End bracket [Stainless steel (SUS303)] Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection o0.25 o0.010 fiber core x 2 (PMMA) (each beam-emitting part and beam-receiving part) FD-L32H FD-S31 Fiber Options Free-cut FD-S32 Free-cut <with FX-AT4> 2 0.079 8 0.315 o2 o0.079 2,000 78.740 o1 4 0.157 (Set screw tightening range) o0.039 (30) (1.181) <with FX-AT5> 2.7 0.106 2,000 78.740 (30) (1.181) 15 0.591 7 0.276 End bracket [Stainless steel (SUS303)] End bracket [Stainless steel (SUS303)] (o2) (o0.079) Model No. tube (PVC) o0.5 o0.020 Fiber core x 1 (Acryic) Sheath o1 o0.039 (Polyethylene) Thru-beam Type 2-o1.3 o0.051 (o2.5) (o0.098) Model No. tube (PVC) o1 o0.039 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) Free-cut FD-S33GW Free-cut <with FX-AT5> 15 0.591 7 0.276 <with FX-AT6> 15 0.591 7 0.276 2,000 78.740 (30) (1.181) 2,000 78.740 (30) (1.181) o1 o0.039 2-o1.3 o0.051 o3 o0.118 End bracket [Stainless steel (SUS303)] o1.3 o0.051 (o2.5) (o0.098) Model No. tube (PVC) o1 o0.039 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) Details of sensing part o3 o0.118 End bracket [Stainless steel (SUS303)] Beam-emitting side FX-500 series FX-100 series INDEX Beam-receiving side (o2) (o0.079) Model No. tube (PVC) Sheath o1 o0.039 (Polyethylene) Sheath o1.3 o0.051 (Polyethylene) 2.7 0.106 Beam-receiving o0.25 o0.010 fiber core x 9 (PMMA) FD-S32 Beam-emitting o0.5 o0.020 fiber core x 1 (PMMA) FD-S21 Others Amplifiers FD-R60 FD-S32W 2.7 0.106 Retroreflective Type Reflective Type o3 o0.118 o3 o0.118 -0.07 -0.003 -0.1 -0.004 Mounting reference surface (Periphery) Fiber Dimensions Earlier models comparison table 50 New product introduction Tough Fiber Fiber Selection Guide DIMENSIONS (Unit: mm in) FD-V30 Free-cut 2.8 0.110 Cylindrical Type Sleeve Flat Type Wide Beam Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection o3 o0.118 Sleeve [Stainless steel(SUS303)] End bracket [Stainless steel (SUS303)] View A Fiber Dimensions Thru-beam Type 1.3 0.051 Free-cut 4.5 0.177 Beam axis 10 0.394 Earlier models comparison table Free-cut A 0.5 0.020 15 0.591 20 0.787 o5 o0.197 o2 o0.079 <with FX-AT4> Set screw tightening range 2,000 78.740 2-o2.2 o0.087 (30) (1.181) 5 0.197 3.5 0.138 7 0.276 Sleeve [Stainless steel(SUS304)] End bracket [Stainless steel (SUS303)] (o3.2) (o0.126) Model No. tube (PVC) 1.7 0.067 FD-Z20HBW Free-cut <with FX-AT4> 5 0.197 2 0.079 3.5 0.138 2.5 0.098 2.2 0.087 10 4 0.157 0.394 10 0.394 1,000 39.370 o2.2 o0.087 hole, o3.6 o0.142 spot facing, 1.4 0.055 deep 2-o1 4-R1 R0.039 (30) o0.039 (1.181) Beam axis 1 0.039 3.5 3.5 0.138 0.138 1.2 0.047 7 0.276 14 6.5 2.2 0.087 0.551 0.256 o2.4 o0.094 7 0.276 Beam axis o1 o0.039 fiber core x 1 (PMMA) 0.9 Sheath o1.3 o0.051 (Polyethylene) 0.035 (o3.2) (o0.118) Model No. tube (PVC) 1.05 0.041 Free-cut 15 0.591 Lens (BK7) 1 0.039 2,000 78.740 4.6 0.181 9.5 0.374 Enclosure (PC) 5.2 0.205 Beam axis 2-o1.3 o0.051 (o2.5) (o0.098) Model 2.7 0.106 No. tube (PVC) 1.6 0.063 Beam axis A A o1.3 o 0.051 x 2 Prism (Acrylic) <with FX-AT3> 2,000 78.740 3.5 4-R1 R0.039 0.138 Enclosure (PC) (30) (2.2) (0.087) (1.181) 2,000 78.740 o3.2 o0.126 hole, o5.6 o0.220 spot facing, 2.2 0.087 deep Inner pipe [Stainless steel (SUS)] Multi-core fiber (Fiber core: acrylic, Sheath: polyethylene) (20) (0.787) FD-V30W FD-Z50HW <with FX-AT5> 3.5 0.138 2.2 0.087 14 6.5 0.256 0.551 7 0.276 Multi-core fiber o0.075 o0.003 x 151 Free-cut 11 0.433 <with FX-AT5> 3.5 0.138 2-o2.2 o0.087 o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) Assembly dimensions with MS-FD-2 (attached mounting bracket) Lens (BK7) 9.5 0.374 4.6 0.181 12.2 0.480 5 0.197 10.2 0.402 1 0.039 15 2,000 78.740 0.591 2-M3 x 0.5 0.020 3.3 0.130 4 0.157 3.3 0.130 1.2 0.047 FD-Z20HBW (o3) (o0.118) Model No. tube (PVC) Free-cut o1 View A o0.039 o0.5 o0.020 fiber core x 1 (PMMA) 0.6 0.024 Sheath o1 o0.039 (Polyethylene) o3.2 o0.126 hole, o5.6 o0.220 spot facing, 2.2 0.087 deep 1 3.5 0.138 0.039 1.05 0.041 Inner pipe [Stainless steel(SUS304)] 1.05 0.041 A A o1 o 0.039 x 2 Multi-core fiber o0.0375 o0.001 x 151 o2.4 o0.094 Enclosure (Polycarbonate) (2.2) (0.087) (o2) (o0.079) Model No. tube (PVC) Inner pipe o1.5 [Stainless steel(SUS304)] Enclosure (PC) o0.059 7 1 0.039 2.1 0.083 0.276 7 0.276 Prism Beam (Acrylic) axis FD-WZ7 2.3 0.091 3 0.118 0.5 0.020 1.05 0.041 (20) (0.787) View A o0.5 o0.020 o0.75 o0.030 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) View A 1,000 39.370 o2.2 o0.087 hole, o3.6 o0.142 spot facing, 1.4 0.055 deep Inner pipe [Stainless steel (SUS)] Multi-core fiber (Fiber core: Acrylic, Sheath: Polyethylene) 2 0.079 2.5 0.098 1.2 0.047 2.2 10 4 0.157 0.087 0.394 o1.5 Enclosure o0.059 (Polycarbonate) FD-Z40HBW INDEX FD-WZ4 <with FX-AT3> Others FX-100 series 2 0.079 2.5 0.098 Shielding plate (Polyester) FD-V50 Reflective Type FX-500 series (o2) (o0.079) Model No. tube (PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) 1.3 0.051 Shielding plate (Polyester) Retroreflective Type Amplifiers View A 2,000 78.740 2-o1 o0.039 (30) (1.181) o3 o0.118 End bracket [Stainless steel (SUS303)] Sleeve [Stainless steel(SUS304)] (o2) (o0.079) Model No. tube (PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) 15 0.591 o1.5 o0.059 A Shielding plate (Polyester) Fiber Options Beam axis 15 0.591 2,000 78.740 2-o1 o0.039 (30) (1.181) Set screw tightening range 10 0.394 2.8 0.110 2 0.079 2.5 0.098 Convergent Reflective Type Retroreflective Type Free-cut <with FX-AT4> Set screw tightening range 15 0.591 o1.5 o0.059 A Small Spot Narrow Beam 10 0.394 Beam axis 15 0.591 Viewing new models Threaded Type FD-V30W <with FX-AT4> Choose by shape/ application Super Quality Dimensions are listed in the order of thru-beam type, retroreflective type, and reflective type, and in alphabetic order of the model No. Reflective type fibers Choose by model Fibers Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. 6 0.236 Beam axis 14 0.551 4 0.157 7 0.276 5.2 0.205 MS-FD-2 Mounting bracket [Stainless steel(SUS304)] Enclosure (PC) 2-o2.2 o0.087 o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) 51 DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. New product introduction Tough Fiber Vacuum-resistant Atmospheric side fiber FT-J8 Free-cut Fiber Selection Guide (Accessory for vacuum-resistant fiber) <with FX-AT3> Photo-terminal side 4 0.157 Amplifier side 2,000 78.740 10 0.394 o3.6 o0.142 Choose by model Choose by shape/ application o2.2 o0.087 11 0.433 Viewing new models Mounting cap nut opposing faces 8 0.315 [Stainless steel (SUS)] o4 o0.157 Joint [Brass (C3604) (Nickel plated)] Fibers Super Quality Threaded Type Cylindrical Type FB-1 Fiber bender (Optional) 52 2.047 40 1.575 FTP-FDP- Protective tube (Optional) FTP-, FDP-N L 15 0.591 15 0.591 3 0.118 20 0.787 o15 o0.591 Wide Beam o4.5 o0.177 spiral tube [Stainless steel (SUS)] FV-BR1 Photo-terminal (for vacuum-resistant) (with vacuum-resistant fiber) Chamber wall or flange 5 0.197 M4 x 0.7 0.028 internal thread, 5 0.197 deep FTP-N 14 0.551 o5.5 to o6.0 o0.217 to o0.236 M5 x 0.8 0.031 thread [Stainless steel (SUS)] M5 x 0.8 0.031 thread O-ring Spring washer o10 o0.394 Opposing faces 8 0.315, thickness 3 0.118 3 0.118 15 0.591 3.7 0.146 M2.6 x 0.45 0.018 internal thread, 3 0.118 deep o7 o0.276 spiral tube [Stainless steel (SUS)] o8 o0.315 [Brass (Nickel plated)] M6 x 0.75 0.030 internal thread, 5 0.197 deep Vacuum-resistant side-view lens (Optional) Model No. FTP-1000, FTP-N1000, FDP-N1000, FDP-1000 FTP-1500, FTP-N1500, FDP-N1500, FDP-1500 Lens (BK7) 4.7 0.185 10.5 0.413 Heat resistant adhesive 9.5 0.374 7.3 0.287 3.6 0.142 4.5 0.177 M6 x 0.75 0.030 thread [Stainless steel (SUS)] o18 o0.709 Chemicalresistant Heatresistant Liquid Leak / Liquid Detection Fiber Options 2-o3.1 o0.122 Thru-beam Type M10 x 1 0.039 thread [Brass (Nickel plated)] * Length L FTP-500, FTP-N500, FDP-N500, FDP-500 Enclosure [Stainless steel (SUS)] Retroreflective Type Fiber Dimensions Material: Enclosure........Aluminum alloy (A6061-T6) Lens...............BK-7 FV-SV2 L Convergent Reflective Type Vacuumresistant FDP- 15 0.591 o11 o0.433 3.7 0.146 o4 o0.157 o3.6 o0.142 lens o1 o0.039 vent hole 2 0.079 15 0.591 M3 x 0.5 0.020 internal thread, 5 0.197 deep Vacuum-resistant expansion lens (Optional) 9.2 0.362 6 0.236 4 0.157 L 15 0.591 o3.8 o0.150 spiral tube [Stainless steel (SUS)] o5 o0.197 [Brass (Nickel plated)] Hole FV-LE1 M8 x 1 0.039 thread [Brass (Nickel plated)] o6 o0.236 [Brass (Nickel plated)] Material: PP (Containing steel blade) Mounting hole Small Spot Narrow Beam 8.6 0.341 36 +10 1.417 +0.039 0 6 0.236 2 0.079 Sleeve Flat Type Length L 500 +100 19.685 +0.394 0 1,000 +100 39.370 +0.394 0 1,500 +100 59.055 +0.394 0 Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series 2.8 0.110 6.6 0.260 o1 o0.039 vent hole 5.5 0.217 3.6 0.142 M2.6 x 0.45 0.018, 3.2 0.126 deep INDEX Earlier models comparison table 52 New product introduction Tough Fiber DIMENSIONS (Unit: mm in) FX-AT2 Attachment for fixed-length fiber (Accessory for fixed-length fiber) Choose by model Viewing new models Material: POM Fibers FX-AT4 (Accessory for o2.2 mm o0.087 in fiber) Material: Polycarbonate Attachment for o1 mm o0.039 in fiber Threaded Type 3 0.118 4 0.157 Cylindrical Type 3.5 0.138 6.5 2 0.256 0.079 o2.2 o0.087 Material: Holder.....PA (Nylon 66) Ground...POM Convergent Reflective Type (Accessory for o1 mm o0.039 in / o1.3 mm o0.051 in mixed fiber) Retroreflective Type 3 0.118 4 0.157 Chemicalresistant 20.5 0.807 3.5 0.138 5 0.197 Heatresistant 15 7 0.591 0.276 5 0.197 1.7 0.067 o2.2 o0.087 Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Material: Holder..............PA (Nylon 66) Ground.............POM FX-LE1 Fiber Dimensions 9.2 0.362 Thru-beam Type Reflective Type o4.3 o0.169 Material: Enclosure............ Brass (Nickel plated) Lens.................... Glass FX-500 series FX-100 series 2 0.079 o2.2 o0.087 FX-MR1 o4 o0.157 FX-CT2 20.2 0.795 11 0.433 o6 o0.236 o1.4 o0.055 o1.4 o0.055 Fiber cutter (Accessory for free-cut type fiber) 8 0.315 45 1.772 o1.4 o0.055 25 0.984 Material: ABS FX-LE2 Super-expansion lens (Optional) 22.2 0.874 17 0.669 8 5 0.315 0.197 Lens Knurled surface o9 o0.354 6 0.236 o7 o0.276 o12 o10.2 o0.472 o0.402 M2.6 x 0.45 0.018 internal thread, 3 0.118 deep Pinpoint spot lens (Optional) Lens Lens Effective dia.: o3.3 o0.130 6.5 0.256 15 7 0.591 0.276 5 0.197 1.7 0.067 o2.2 o0.087 M4 x 0.7 0.028 internal thread, 6 0.236 deep Material: Enclosure............ Stainless steel (SUS303) Lens.................... Glass INDEX Earlier models comparison table 3.5 0.138 5 0.197 o1.1 o0.043 Others Amplifiers 3 0.118 4 0.157 20.5 0.807 14.6 0.575 Expansion lens (Optional) o4 o0.157 Retroreflective Type 2 0.079 o2.2 o0.087 6.5 0.256 11.2 16 0.441 0.630 Attachment for o1.3 mm o0.051 in fiber Material: Holder..............PA (Nylon 66) Ground.............POM FX-AT6 Attachment for o1 mm o0.039 in / o1.3 mm o0.051 in mixed fiber 5 0.197 4 0.157 (Accessory for o1.3 mm o0.051 in fiber) o1.1 o0.043 Narrow Beam Wide Beam FX-AT5 o1.1 o0.043 5 0.197 7 15 0.591 0.276 5 0.197 1.7 0.067 o2.2 o0.087 Sleeve 8.2 0.323 7 0.276 (Accessory for o1 mm o0.039 in fiber) 20.5 0.807 9.1 0.358 7.5 0.295 2-o2.3 o0.091 7 0.276 Super Quality Small Spot Attachment for o2.2 mm o0.087 in fiber 14 0.551 7 13 0.276 0.512 Choose by shape/ application FX-AT3 8 0.315 6 0.236 Fiber Selection Guide Flat Type Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. FX-MR2 Zoom lens (Optional) 27.1 1.067 20 0.787 Mounting drawing with FD-G4 = 36 to 37 1.417 to 1.457 Note: In order to obtain a o0.5 mm o0.02 in spot, it is necessary to keep M4 x 0.7 0.028 internal " ", in the above figure, within the thread, 6 0.236 deep specified range. Material: Enclosure............ Aluminum (Black ALMITE) Lens.................... Glass 7 0.276 4.5 0.177 o7.1 o0.280 M4 x 0.7 0.028 internal thread, 6 0.236 deep Material: Enclosure............ Aluminum (Black ALMITE) Lens.................... Glass o8 o0.315 53 DIMENSIONS (Unit: mm in) FX-MR3 Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. Finest spot lens (Optional) FX-MR5 6.3 0.248 Mounting drawing with FD-EG30 15 0.591 = 27.5 1.083 4 0.157 5 0.197 o4 o0.157 Zoom lens (Optional) o5 o0.197 lens 3.3 0.130 Choose by model Choose by shape/ application 8 0.315 3 0.118 2.5 0.098 4.5 0.177 M3 x 0.5 0.020 internal thread Material: E nclosure............ Aluminum (Black ALMITE) Lens.................... Glass Material: E nclosure............ PBT (Black) Lens.................... Glass 2-M3 x 0.5 0.020 thru-hole threads 7 0.276 Knurled Note: When inserting the fiber, insert fully till it stops. Tough Fiber Fiber Selection Guide 10.3 0.406 20.3 0.799 New product introduction M4 x 0.7 0.028 internal thread, 11 0.433 deep 3.15 0.124 Viewing new models Fibers Super Quality NT-FX-MR5 (exclusive nut) is attached. Threaded Type FX-MR6 Finest spot lens (Optional) FX-SV1 Side-view lens (Optional) Sleeve Mounting drawing with FD-EG31 o4 o0.157 Flat knurl M3 x 0.5 0.020 o4 o0.157 o5 o0.197 16 0.630 Knurled surface Small Spot Narrow Beam M2.6 x 0.45 0.018 internal thread, 3 0.118 deep 5 0.197 Material: Enclosure............ Aluminum (Black ALMITE) Lens.................... Acrylic Flat Type Rod prism 8 0.315 2.5 0.098 = 28.5 1.122 Lens Cylindrical Type Material: Enclosure............ Brass (Nickel plated) Lens.................... Glass Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Note: When inserting the fiber, insert fully till it stops. Heatresistant MS-EX3 Mounting bracket for FX-MR2 (Accessory for FX-MR2) 0.5 0.020 MS-FD-2 Fiber mounting bracket Accessory for FD-Z50HW, FR-KZ50E/KZ50H/Z50HW, FD-H30-KZ1V-S 4 0.157 9.8 0.386 4.9 0.193 Anti-slip rubber sheet (8 x 9.5 x 1) (0.315 x 0.374 x 0.039) t1.2 10 0.394 16 0.630 23 0.906 Material: Brass (Nickel plated) 4 0.157 12.2 0.480 10.2 0.402 5 0.197 6 0.236 Fiber mounting bracket (11) (0.433) 3.2 0.126 Material: Stainless steel (SUS304) RF-003 Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type Reflector for FR-KZ50E/KZ50H 19 0.748 3.2 0.126 3.9 0.154 (88) (90) Others Accessory for FR-KZ50E/KZ50H 5 0.197 10 0.394 (88) (90) 7 0.276 14 0.551 10.1 5 0.398 0.197 3.3 0.130 3-R0.5 R0.020 5 0.197 R1.6 R0.063 4 0.157 3.3 0.130 Accessory for FT-KV40/FT-KV40W R2.5 R0.098 3.3 0.130 Reflective Type MS-FD-3 3.3 0.130 C1 C0.039 Liquid Leak / Liquid Detection 2-M3 x 0.5 0.020 8.7 0.343 0.8 8.5 0.031 0.335 2-o3.5 o0.138 mounting holes Vacuumresistant Cover [Stainless steel (SUS304)] 3.2 0.126 10.6 0.417 1.1 0.043 10 0.394 (Effective reflector width) 10 0.394 19 28 (Effective reflector width) 0.748 1.102 Amplifiers FX-500 series FX-100 series 1 0.039 4.3 0.169 Reflector (Norbornene resin) INDEX 3.5 0.138 0.4 0.016 6.9 0.272 6.9 0.272 Material: Stainless steel (SUS304) Earlier models comparison table 54 New product introduction Tough Fiber DIMENSIONS (Unit: mm in) RF-210 Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the amplifiers. The CAD data in the dimensions can be downloaded from our website. Reflector (Optional) 33.3 1.311 Fiber Selection Guide 35.3 1.390 M3 nut mounting holes (for mounting at the back) Reflector Choose by shape/ application 11 0.433 Viewing new models 34.3 42.3 1.350 1.665 Base 3.2 0.126 Fibers 25 0.984 10 0.394 2-o3.4 o0.134 thru-holes (for mounting at the side) 2-o3.4 o0.134 holes, 6 0.236 deep (for mounting at the back) Super Quality 2-M3 nut mounting holes (for mounting at the side) Material: Acrylic (Reflector) ABS (Base) Two M3 (length 8 mm 0.315 in) screws with washers and two nuts are attached. Flat Type Small Spot RF-230 Narrow Beam Reflector (Optional) 50.3 1.980 Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table (21) (0.827) 8 0.315 4 0.157 25 0.984 Material: Acrylic (Reflector) ABS (Base) Threaded Type Sleeve Reflector (Optional) 12.8 0.504 Choose by model Cylindrical Type RF-220 49.3 59.3 1.941 2.335 (30) (1.181) 10 0.394 5 0.197 40 1.575 Material: A crylic (Reflector) ABS (Base) 2-o4.6 o0.181 mounting holes 3.3 0.130 8.3 0.327 2-o3.6 o0.142 mounting holes 3.3 0.130 8.3 0.327 55 56 New product introduction Tough Fiber Fiber Selection Guide Digital Fiber Sensor FX-500 SERIES At the industry's leading edge Choose by model Choose by shape/ application Conforming to EMC Directive Viewing new models Listing Certified Fibers Super Quality Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Narroe Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant High stability! Decrease the variation among fiber sensors When the FX-500 series is used together with our super quality fiber, the incident light intensity variation among units is decreased to only 1/4 of that of conventional models. By being close to absolute values instead of modified digital values, changes in detection that could not be found in the past can now be monitored. Super quality fiber FX-500 series Liquid Leak / Liquid Detection Fiber Options Retroreflective Type Incident light intensities are stable. Threshold Incident light value intensity 1/4 Unify the threshold value Fiber Dimensions Thru-beam Type Incident light intensity Previous amplifier Can control by using just one threshold value. incident light intensity variation [from previous] Threshold Incident light value intensity Variation in the threshold value Incident light intensity L D MODE L Large variation in incident light intensity. D MODE Reflective Type L Requires setting different threshold values for each sensor. D MODE Others L D MODE Amplifiers FX-500 series FX-100 series H y p e r Max. 25 s response time HYPR mode incorporated Performing minute object detection when using a small diameter fiber is now possible with a high response time and longer sensing range. FX-500 in combination with small diameter fibers which can handle challenging detections, allows super long sensing range. INDEX Earlier models comparison table 7RXJK FX-500 FD-41 Previous FD-NFM2 HYPR mode FX-301 (LONG mode) Note: When using FD-NFM2. Max. 5.7 times! (Note) longer than the previous model 57 A different accuracy! Sharp detection with suppressed hysteresis FX-500 with its accurate detection catches fractional difference in light intensity, fulfilling high precision and lowhysteresis applications. * Highly accurate detection while avoiding saturation H-01 mode * Long range detection of small objects with small difference in light intensity H-02 mode Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Retroreflective type fiber Viewing new models Fibers FT-A11 Reflector Super Quality Threaded Type Display adjustment setting Incident light intensity to a comprehensible value (Display adjustment setting) Cylindrical Type Sleeve The display can be corrected to show any value using the display adjustment settings. It is effective in using multiple units with the same condition. Flat Type Current incident light intensity Unify incident light intensity into any value Built-in logic functions No PLC necessary saving material and programming costs Logical calculation functions Three logical calculations (AND, OR, XOR), are selectable using Output 1 of multiple FX-500 series amplifiers. A PLC is not required which helps to reduce material and programming and costs. New product introduction Equipped with 5 types timers Calculation of two neighboring amplifiers Lower side Output 1 Calculation result output Upper side Output 1 Normal operation Time chart FX-502(P) / 505(P)-C2 T1 Output 1 Calculation result output Output 2 Normal output operation Calculation of one amplifier and external input FX-502(P) / 505(P)-C2 External input (sensor, contact, PLC, etc.) Synchronization fiber T1 OFF-delay ONE-SHOT Detection fiber Beamreceived Beaminterrupted ON OFF Sensing condition Communication direction (Up to 12 units) Calculation of two outputs in one amplifier T1 T1 T1 ON-delay * ONE-SHOT T1 ON OFF ON OFF T1 ON-delay * OFF-delay T2 T2 Setup conditions can be saved and loaded to make setup changes easy at worksite that manufactures multiple models. Wide Beam Convergent Reflective Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection ON OFF ON OFF Fiber Options Timer period: 0.05 ms to 32 s Output 1 has ON-delay * OFF-delay and ON-delay * ONE-SHOT timers. Fiber Dimensions Output 1 Calculation result output Smooth setup changes by 8 data banks Narroe Beam Retroreflective Type For L-ON ON-delay Small Spot Thru-beam Type An optical communication function allows sensors to be adjusted simultaneously The optical communication function allows the data that is currently set to be copied and saved all at once for all amplifiers connected together from the right side. Retroreflective Type Reflective Type Others Amplifiers Single copy & save operation for all amplifiers Optical communication window Remote control improves work FX-502(P) FX-505(P)-C2 efficiency by external input Various types of functions, such as teaching and data load/save, can be performed by PLC external signal, using external input*. * The FX-502 (P) switches Output 2 for an external input. FX-500 series FX-100 series INDEX No need to specify a main unit or sub unit Just use a main cable or a sub cable to distinguish the two. This reduces the costs of inventory management. Earlier models comparison table 58 Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type Type Appearance Emitting element Model No. Standard type Fiber Selection Guide Amplifiers Quick-connection cable is not supplied with FX-501(P) and FX-502(P). Please order it separately. 2-output type Tough Fiber ORDER GUIDE NPN open-collector transistor FX-501P PNP open-collector transistor Flat Type Small Spot NPN open-collector transistor 2 outputs Red LED FX-502P PNP open-collector transistor 2 outputs FX-505-C2 NPN open-collector transistor 2 outputs, analog output FX-505P-C2 PNP open-collector transistor 2 outputs, analog output Convergent Reflective Type Retroreflective Type Chemicalresistant Liquid Leak / Liquid Detection Fiber Options Type Main cable (3-core) Sub cable (1-core) Model No. CN-73-C1 Thru-beam Type Retroreflective Type Reflective Type Others Description CN-73-C5 CN-71-C1 Length: 1 m 3.281 ft CN-71-C2 Length: 2 m 6.562 ft CN-71-C5 0.15 mm 1-core cabtyre cable, with connector on one end Cable outer diameter: o3.0 mm o0.118 in Length: 5 m 16.404 ft Connectable to a main cable up to 15 cables. FX-100 series INDEX Earlier models comparison table * CN-73-C 2 Sub cable * CN-71-C For FX-502(P) Quick-connection cable is not supplied with the amplifier. Please order it separately. Type Main cable (4-core) Model No. CN-74-C1 CN-74-C2 Sub cable (2-core) CN-72-C1 CN-72-C2 CN-72-C5 Description Main cable * CN-74-C Length: 1 m 3.281 ft 0.15 mm2 4-core cabtyre cable, with connector Length: 2 m 6.562 ft on one end Cable outer diameter: o3.0 mm o0.118 in Length: 5 m 16.404 ft Length: 1 m 3.281 ft 0.15 mm2 2-core cabtyre cable, with connector on one end Length: 2 m 6.562 ft Cable outer diameter: o3.0 mm o0.118 in Length: 5 m 16.404 ft Connectable to a main cable up to 15 cables. Sub cable * CN-72-C End plates End plates are not supplied with the amplifier. Please order them separately when the amplifiers are mounted in cascade. Appearance Model No. Amplifiers FX-500 series Main cable Length: 1 m 3.281 ft 0.15 mm2 3-core cabtyre cable, with connector Length: 2 m 6.562 ft on one end Cable outer diameter: o3.0 mm o0.118 in Length: 5 m 16.404 ft CN-73-C2 CN-74-C5 Fiber Dimensions Incorporated For FX-501(P) Quick-connection cable is not supplied with the amplifier. Please order it separately. Heatresistant Vacuumresistant Incorporated (Switchable with Output 2) Quick-connection cables Narroe Beam Wide Beam External input - Cylindrical Type Sleeve Output FX-501 FX-502 Cable type New product introduction MS-DIN-E Description When cascading multiple amplifiers, or when it moves depending on the way it is installed on a DIN rail, these end plates clamp amplifiers into place on both sides. Make sure to use end plates when cascading multiple amplifiers together. Two pcs. per set 59 OPTIONS New product introduction Designation Model No. Amplifier mounting bracket MS-DIN-2 Description Mounting bracket for amplifier Accessory * FX-MB1 (Amplifier protection seal) 10 sets of 2 communication window seals and 1 connector seal Amplifier mounting bracket Tough Fiber * MS-DIN-2 Fiber Selection Guide Choose by model Choose by shape/ application Communication window seal Viewing new models Connector seal Fibers Super Quality Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Narroe Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 60 New product introduction SPECIFICATIONS Tough Fiber Choose by model Choose by shape/ application Viewing new models Model No. Fiber Selection Guide Type Item 2-output type Cable type (Analog output type) NPN output FX-501 FX-502 FX-505-C2 PNP output FX-501P FX-502P FX-505P-C2 +10 12 to 24 V DC-15 % Ripple P-P 10 % or less Supply voltage Power consumption Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage, excluding analog output of cable type) ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage, excluding analog output of cable type) Output (2-output type and cable type: Output 1, Output 2) <NPN output type> <PNP output type> NPN open-collector transistor PNP open-collector transistor * Maximum sink current: 100 mA * Maximum source current: 100 mA (2-output type and cable type are 50 mA) (Note 2) (2-output type and cable type are 50 mA) (Note 2) * Applied voltage: 30 V DC or less (between output and 0 V) * Applied voltage: 30 V DC or less (between output and +V) * Residual voltage: 2 V or less (Note 3) (at maximum sink current) * Residual voltage: 2 V or less (Note 3) (at maximum source current) Fibers Output points Super Quality Threaded Type Cylindrical Type Standard type 1 point 2 points Output operation Switchable either Light-ON or Dark-ON by L/D mode Short-circuit protection Incorporated Response time H-SP: 25 s or less, FAST: 60 s or less, STD: 250 s or less, LONG: 2 ms or less, U-LG: 4 ms or less, HYPR: 24 ms or less, selectable Analog output (Cable type only) Output current: 4 to 20 mA approx. [H-SP, FAST STD: At 0 to 4,000 digits, LONG: At 0 to 8,000 digits (Note 4)], Response time: 2 ms or less, Zero point: Within 4 mA 1 % F.S., Span: Within 16 mA 5 % F.S., Linearity: Within 3 % F.S., Load resistance: 0 to 250 External input (2-output type only, switchable with Output 2) - <NPN output type> NPN non-contact input * Signal condition High: +8 V to +V DC or Open Low: 0 to +1.2 V DC (at 0.5 mA source current) * Input impedance: 10 k approx. Convergent Reflective Type Possible external input function - Retroreflective Type Sensitivity setting Chemicalresistant Incident light intensity display range Sleeve Flat Type Small Spot Narroe Beam Wide Beam Timer function Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode] Interference prevention function Incorporated (Note 5), selectable either automatic interference prevention or different frequency Thru-beam Type Protection Others <Output 2> Incorporated with variable OFF-delay / ON-delay /ONE SHOT timer, switchable either effective or ineffective Light emitting amount selection function Various settings Reflective Type <Output 1> Incorporated with variable OFF-delay / ON-delay /ONE SHOT / ON-delay * OFF-delay / ON-delay * ONE SHOT timer, switchable either effective or ineffective Timer range "ms": 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx., Timer range "sec.": 0.5 s approx., 1 to 32 s approx., 1 s approx., Timer range "1/10 ms": 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx., each output is set individually Timer period Fiber Dimensions Retroreflective Type H-SP / FAST / STD: 0 to 4,000, LONG: 0 to 8,000, U-LG / HYPR: 0 to 9,999 Incorporated with variable OFF-delay / ON-delay /ONE SHOT / ON-delay * OFF-delay / ON-delay * ONE SHOT timer, switchable either effective or ineffective Liquid Leak / Liquid Detection Fiber Options Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment Heatresistant Vacuumresistant <PNP output type> PNP non-contact input * Signal condition High: +4 V to +V DC (at 3 mA sink current) Low: 0 to +0.6 V DC or Open * Input impedance: 10 k approx. Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold tracking setting, etc. IP40 (IEC) -10 to +55 C +14 to +131 F [If 4 to 7 units are mounted in cascade: -10 to +50 C +14 to +122 F or if 8 to 16 units (cable type: 8 to 12 units) are mounted in cascade: -10 to +45 C +14 to +113 F] (No dew condensation or icing allowed), Storage: -20 to +70 C -4 to +158 F Ambient temperature Emitting element (modulated) Red LED (Peak emission wavelength: 643 nm 0.025 mil) Material Enclosure, Case cover: Polycarbonate, Switch: TPEE Cable - 0.15 mm2 6-core cabtyre cable, 2 m 6.562 ft long Amplifiers Cable extension - FX-500 series Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC) Weight Net weight: 15 g approx., Gross weight: 70 g approx. Net weight: 60 g approx., Gross weight: 100 g approx. FX-100 series INDEX Earlier models comparison table FX-MB1 (Amplifier protection seal): 1 set Accessory Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 C +73.4 F. 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type) 3) In case of using the quick-connection cable (cable length 5 m 16.404 ft) (optional). 4) If display adjustment was conducted, it is not in this range. 5) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below. Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units. Number of sensor heads mountable closely (Unit: set) Response time H-SP FAST STD LONG U-LG HYPR IP-1 0 2 4 8 8 12 61 I/O CIRCUIT AND WIRING DIAGRAMS New product introduction FX-501 NPN output type I/O circuit diagram Load (Black) Output 2 + + - User's circuit Notes: 1) The quick-connection sub cable does not have +V (brown) and 0 V (blue). The power is supplied from the connector of the main cable. 2) 50 mA max., if five amplifiers, or more, are connected together. Blue (Note 1) Fibers 2 Output Super Quality 3 0V Threaded Type 100 mA max. (Note 2) 2 3 + Load (Blue) 0 V (Note 1) + - Load Blue (Note 1) Notes: 1) The quick-connection sub cable does not have +V (brown) and 0 V (blue). The power is supplied from the connector of the main cable. 2) 50 mA max., if five amplifiers, or more, are connected together. Terminal arragement diagram 1 +V 2 Output 3 0V Sensor circuit 1 4 2 Color code of quick-connection cable (White) Output 2 / External input Wide Beam Convergent Reflective Type Heatresistant Color code of quick-connection cable White Load Load 50 mA max. (Note 2) (Black) Output 1 + - External input Load Load + - Black 12 to 24 V DC +10 % -15 Blue (Note 1) 12 to 24 V DC +10 % -15 External input Note: The quick-connection sub cable does not have brown lead wire and blue lead wire. (Blue) 0 V (Note 1) Internal circuit Narroe Beam Vacuumresistant Liquid Leak / Liquid Detection Brown (Note 1) (Brown) +V (Note 1) 50 mA max. (Note 2) 3 Wiring diagram Terminal No. Small Spot Chemicalresistant NPN output type I/O circuit diagram Sleeve Retroreflective Type FX-502 User's circuit Notes: 1) The quick-connection sub cable does not have +V (brown) and 0 V (blue). The power is supplied from the connector of the main cable. 2) 25 mA max., if five amplifiers, or more, are connected together. Terminal arragement diagram 1 +V 2 Output 1 3 0V Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type 4 Output 2 / External input Reflective Type Others FX-502P PNP output type I/O circuit diagram 1 Sensor circuit 12 to 24 V DC +10 % -15 Note: The quick-connection sub cable does not have brown lead wire and blue lead wire. User's circuit Cylindrical Type Flat Type Black 12 to 24 V DC +10 % -15 - (Black) Output Internal circuit Color code of quick-connection cable Brown (Note 1) (Brown) +V (Note 1) 1 Sensor circuit Color code of quick-connection cable Viewing new models +V Wiring diagram Terminal No. Choose by shape/ application 1 PNP output type I/O circuit diagram Choose by model Terminal arragement diagram FX-501P 2 4 3 Internal circuit 12 to 24 V DC +10 % -15 Note: The quick-connection sub cable does not have brown lead wire and blue lead wire. (Blue) 0 V (Note 1) Internal circuit Fiber Selection Guide Load Black 12 to 24 V DC +10 % -15 - 100 mA max. (Note 2) 3 Color code of quick-connection cable Brown (Note 1) (Brown) +V (Note 1) 1 Sensor circuit Wiring diagram Terminal No. Color code of quick-connection cable Tough Fiber Terminal No. Wiring diagram Color code of quick-connection cable Brown (Note 1) (Brown) +V (Note 1) 50 mA max. (Note 2) (Black) Output 1 50 mA max. (Note 2) (White) Output 2 / External input Color code of quick-connection cable External input + - Black 12 to 24 V DC +10 % -15 Load Load (Blue) 0 V (Note 1) User's circuit Notes: 1) The quick-connection sub cable does not have +V (brown) and 0 V (blue). The power is supplied from the connector of the main cable. 2) 25 mA max., if five amplifiers, or more, are connected together. White Blue Load Load (Note 1) External input + 12 to 24 V DC +10 - % -15 Note: The quick-connection sub cable does not have brown lead wire and blue lead wire. Amplifiers FX-500 series FX-100 series INDEX Terminal arragement diagram 1 +V 2 Output 1 3 0V 4 Output 2 / External input Earlier models comparison table 62 I/O CIRCUIT AND WIRING DIAGRAMS New product introduction Tough Fiber FX-505-C2 NPN output type I/O circuit diagram Fiber Selection Guide Choose by shape/ application Viewing new models (Pink) External input Sensor circuit Choose by model Wiring diagram Color code (Brown) +V Brown Load Load (Black) Output 1 + - (White) Output 2 Black 12 to 24 V DC 10 % 15 + Pink (Gray) Analog output (4 to 20 mA) Internal circuit Load White (Blue) 0 V Fibers Load - 12 to 24 V DC 10 % 15 Blue Load (0 to 250 ) Load (0 to 250 ) Gray User's circuit Super Quality Threaded Type Cylindrical Type Sleeve FX-505P-C2 I/O circuit diagram Flat Type Narroe Beam Wide Beam Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table Color code Brown (Black) Output 1 + (White) Output 2 Load (Pink) External input (Blue) 0 V Convergent Reflective Type Retroreflective Type Wiring diagram (Brown) +V Sensor circuit Small Spot PNP output type User's circuit 12 to 24 V DC 10 % 15 Pink Black + White Load (Gray) Analog output (4 to 20 mA) Internal circuit - Load (0 to 250 ) Blue Gray Load Load - 12 to 24 V DC 10 % 15 Load (0 to 250 ) 63 PRECAUTIONS FOR PROPER USE * Never use this product as a sensing device for personnel protection. * In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. Wiring * Make sure that the power supply is OFF while adding or removing the amplifiers. * Note that if a voltage exceeding the reted range is applied, or if an AC power supply is directly connected, the product may get burnt or damaged. * Note that short-circuit of the load or wrong wiring may burn or damage the product. * Do not run the wires together with high-voltage lines or power lines, or put them in the same raceway. This can cause malfunction due to induction. * Verify that the supply voltage variation is within the rating. * If power is supplied from a commercial switching regulator, ensure that the frame ground (F.G.) terminal of the power supply is connected to an actual ground. * In case noise generating equipment (switching regulator, inverter motor, etc.) is used in the vicinity of this product, connect the frame ground (F.G.) terminal of the equipment to an actual ground. * Make sure to use the quick-connection cable (optional) for the connection of the controller. Extension up to total 100 m 328.084 ft is possible with 0.3 mm2 or more, cable. However, in order to reduce noise, make the wiring as short as possible. * Make sure that stress by forcible bending or pulling is not applied to the sensor cable joint and fiber cable. Refer to the "PRO mode operation manual" on our website for details. Others * Our products have been developed / produced for industrial use only. * The specification may not be satisfied in a strong magnetic field. * The ultra long distance (U-LG, HYPR) mode is more likely to be affected by extraneous noise since the sensitivity of that is higher than the other modes. Make sure to check the environment before use. * Do not use during the initial transient time (H-SP, FAST, STD: 0.5 sec., LONG, U-LG, HYPR: 1 sec.) after the power supply is switched ON. * These sensors are only for indoor use. * Avoid dust, dirt, and steam. * Make sure that the product does not come in contact with oil, grease, organic solvents such as thinner, etc., strong acid or alkaline. * This product cannot be used in an environment containing inflammable or explosive gases. * Never disassemble or modify this product. * This product adopts EEPROM. Settings cannot be done 100 thousand times or more because of the EEPROM's lifetime. New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Narroe Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 64 New product introduction Tough Fiber DIMENSIONS (Unit: mm in) FX-501(P)FX-502(P) Output selection indicator (Yellow) (Note 1) Fiber Selection Guide Choose by model Choose by shape/ application Super Quality Threaded Type Beamemitting part Flat Type Small Spot Narroe Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant 24 0.945 36.5 1.437 3 75 2.953 0.118 Suitable for 35 mm 1.378 in width DIN rail Notes: 1) 2) 3) 4) After the modification Output selection indicator (Yellow) (Note 1) Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table Digital display (Green / Red) 10 Beam- 0.394 emitting part Beamreceiving part Communication window 27.8 1.094 22.7 0.894 7 0.276 32 28 1.260 1.102 20.8 7 0.276 0.819 Setting switch (Note) o3.7 o0.146 cable 2 m 6.562 ft (Note) 10.5 0.413 9.2 0.362 5.7 0.224 3 0.118 MODE key 24 0.945 36.5 1.437 75 2.953 Suitable for 35 mm 1.378 in width DIN rail 3.95 0.156 2.8 0.110 Note: T he shape of setting switch and cable will be changed from production at the end of November, 2011. Please see drawing below. After the modification 9.95 62.5 2.461 0.392 2 0.079 Digital display (Green / Red) Output selection indicator (Yellow) MODE key Setting switch Output 2 operation indicator (Orange) (Note 1) Beamreceiving part 10.4 0.409 8.2 0.323 62.5 2.461 2 0.079 9.95 0.392 MODE key Output 1 operation indicator (Orange) Output 1 operation indicator (Orange) (Note 2) Fiber Options Retroreflective Type 8.2 0.323 Output 2 operation indicator (Orange) 3.95 0.156 (Note 3) FX-502(P) only FX-501(P): Operation indicator FX-501(P): 3-pin, FX-502(P): 4-pin The shape of setting switch will be changed from production at the end of November, 2011. Please see drawing below. 10 Beam- 0.394 emitting part 8.2 0.323 Amplifier 62.5 2.461 2 0.079 1.1 0.043 7 0.276 10.5 0.413 5.7 0.224 Liquid Leak / Liquid Detection Thru-beam Type 27.8 1.094 22.7 0.894 32 1.260 28 20.8 1.102 0.819 7 0.276 Beamreceiving part FX-505-C2FX-505P-C2 Output selection indicator (Yellow) MODE key Setting switch (Note 4) Communication window 10 0.394 Vacuumresistant Fiber Dimensions Amplifier 10.4 62.5 2.461 0.409 2 0.079 Digital display (Green / Red) Output 1 operation indicator (Orange) Output 2 operation indicator (Orange) (Note 1) Cylindrical Type Sleeve 8.2 0.323 Output 1 operation indicator (Orange) (Note 2) Viewing new models Fibers The CAD data in the dimensions can be downloaded from our website. Communication window 27.8 1.094 22.7 0.894 32 1.260 28 20.8 1.102 0.819 7 0.276 5.7 0.224 24 0.945 36.5 1.437 3 75 2.953 0.118 Suitable for 35 mm 1.378 in width DIN rail Notes: 1) FX-502(P) only 2) FX-501(P): Operation indicator 3) FX-501(P): 3-pin, FX-502(P): 4-pin Output 2 operation indicator (Orange) Digital display (Green / Red) 1.1 0.043 7 0.276 10.5 0.413 3.95 0.156 (Note 3) 10 Beam- 0.394 emitting part Beamreceiving part Communication window 27.8 1.094 22.7 0.894 7 0.276 32 28 1.260 1.102 20.8 7 0.276 0.819 o4 o0.157 6 core cable 2 m 6.562 ft 10.5 0.413 9.2 0.362 5.7 0.224 3 0.118 Setting switch 24 0.945 36.5 1.437 75 2.953 Suitable for 35 mm 1.378 in width DIN rail 3.95 0.156 2.8 0.110 65 DIMENSIONS (Unit: mm in) CN-73-CCN-74-C Main cable (Optional) * Length L Length L CN-73/74-C1 1,000 39.370 CN-73/74-C2 2,000 78.740 CN-73/74-C5 5,000 196.850 (Note 2) 50 1.969 o3 o0.118 cable ( 14 0.551 2.54 0.100 2.65 0.104 New product introduction CN-71-CCN-72-C Tough Fiber Sub cable (Optional) * Length L L Model No. (Note 1) The CAD data in the dimensions can be downloaded from our website. ) 2.9 (0.114 ) 10 0.394 6 0.236 7 0.276 10 0.394 13.6 0.535 3 0.118 L CN-71/72-C1 1,000 39.370 CN-71/72-C2 2,000 78.740 CN-71/72-C5 5,000 196.850 (Note 2) 14 (0.551 ) 3 0.118 ( 2.9 0.114 ) 2.54 0.100 Fiber Selection Guide Choose by model 10 0.394 6 0.236 ( ) 12 10.5 (0.472 ) 0.413 2.65 0.104 7.2 0.283 50 1.969 o3 o0.118 cable 2.54 0.100 (Note 1) 0.2 0.008 Notes: 1) CN-74-C only 2) CN-73-C: 3-core Length L ( ) 12 10.5 (0.472 ) 0.413 2.54 0.100 Model No. Choose by shape/ application Viewing new models Fibers 0.2 0.008 Notes: 1) CN-72-C only 2) CN-71-C: 1-core 7 0.276 10 0.394 13.6 0.535 3 0.118 Super Quality 7.2 0.283 Threaded Type Cylindrical Type Sleeve MS-DIN-2 Amplifier mounting bracket (Optional) 21.6 0.850 16 0.630 5.2 0.205 MS-DIN-E End plate (Optional) Small Spot 2.75 0.108 3.2 0.126 Narroe Beam 10 0.394 8.5 0.335 3.2 0.126 0.4 0.016 o1.8 o0.071 7.5 0.295 4.2 0.165 5.2 0.205 35 1.378 2 0.079 2 0.079 2-o3.2 o0.126 holes Material: C old rolled carbon steel (SPCC) (Uni-chrome plated) 5 0.197 15 0.591 60 2.362 3 0.118 5.6 M3 square nut 0.220 24.7 0.972 t1 t 0.039 27 1.063 M3 (length 18 mm 0.709 in) pan head screws 3 0.118 1.6 0.063 Flat Type 32 1.260 Material: Polycarbonate 4 0.157 Suitable for 35 mm 1.378 in width DIN rail Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 66 New product introduction Tough Fiber Fiber Selection Guide Digital Fiber Sensor FX-100 SERIES Taking fiber sensors to the next level Choose by model Choose by shape/ application Conforming to EMC Directive Viewing new models Listing Fibers Super Quality Threaded Type Cylindrical Type Sleeve FX-100 series has been modificated from July 2011 production. The color of enclosure has been changed from white to dark gray and the protection cover has been attached. Flat Type Small Spot Narroe Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Saving-space with a width of 9 mm 0.354 in Improved stability over both long terms Very slim at only 9 mm 0.354 in. This is much thinner than existing fiber sensors. Even if the difference is small when only using one unit, when using many units this makes a very large difference. Utilizes the standard Panasonic Electric Works SUNX digital fiber sensor element "Four-chemical emitting element" for light emission. The light emission is guaranteed to be stable over long periods of time. [Stable sensing comparison] Vacuumresistant 9 mm 0.354 in Liquid Leak / Liquid Detection Fiber Options Thru-beam Type Retroreflective Type Reflective Type FX-100 Three-chemical emitting element Long-term stability Time Teaching using ON / OFF buttons SET mode Fiber Dimensions Light-emitting amount Wide Beam Simply press the ON button when an object is present and OFF when it is not. <Setting example> Thru-beam type / Retroreflective type Others Resolves variation in incident light intensity display PRO mode GETA function Even when performing the same sensing operation, there may be variances in the digital values of the fiber amp. Given value can be corrected with the GETA function, so the apparent variation can be eliminated. Variations in the amount of light received Object present ON Object absent OFF Amplifiers FX-500 series FX-100 series Reflective type Unify at 500 using the GETA function INDEX Earlier models comparison table Object present ON Object absent OFF 67 Stable detection by attenuation function SET mode If the light receiving level becomes saturated when sensing over short distances or when sensing transparent Upper objects or minute objects, the light emitting display limit amount can be reduced so that stable sensing can be provided without needing to change the response time. Light reduction: 3 levels plus an automatic mode Setting copy function to reduce man-hours PRO mode and human error By cable wiring, the master sensor settings can be copied along with data transmissions. By synchronizing the settings on all the devices, trouble from setting errors can be prevented. <Wiring inset coping> Light emitting amount changed Master side Color of lead wire of attached connector cable + - (White) External input Copy Slave side 12 to 24 V DC 10 % (Brown) +V Multi-function external input PRO mode Settings such as emission halt, limit / auto teaching, 2-point teaching and ECO settings can be carried out via external input. Also, the threshold value can be memorized. (Brown) +V (Black) Output (White) External input (Blue) 0 V External input lines are equipped as standard PLC etc. Viewing new models Super Quality Threaded Type (Blue) 0 V Copiable setting Threshold value, output operation setting, timer operation setting, timer period setting, light-emitting amount selection setting (attenuation function), shift setting, ECO setting, digital display inversion setting, and threshold value margin setting (alert function) *The copy unit SC-SU1 which can copy settings in one touch is available. (optional) The emitted light and output indicator flash at the same frequency. Choose by model Fibers (White) External input The emission frequencies can be set separately for each unit in order to avoid interference. The emitted light flashes while setting is in progress, so that you can see at a glance which fiber sensor is currently being set. Fiber Selection Guide (Blue) 0 V (Black) Output FX-101: Interference prevention for up to 3 units FX-102: Interference prevention for up to 4 units Tough Fiber Choose by shape/ application (Brown) +V (Black) Output Interference prevention function SET mode New product introduction Electricity consumption saving possibilities Cylindrical Type Sleeve Flat Type Small Spot Narroe Beam Wide Beam Convergent Reflective Type ECO After setting, if about 20 seconds go by without any key operations taking place the digital display will turn off and energy consumption is kept under 600 mW. (When illuminated it is under 720 mW) Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Commercially-available connectors are used so that lead time and spare part numbers can both be reduced The connectors used are commercially-available connectors, so that processing costs and lead time required for carrying out processing after purchase of the sensors can be greatly reduced. The same connection parts as the DP-100 series of digital pressure sensors and the PM-64 series of micro photoelectric sensors can be used. Commercially-available press-fit connectors are used, so that the processing costs for connection cables can be greatly reduced. Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series Commercially-available connector FX-100 series INDEX Earlier models comparison table 68 New product introduction Tough Fiber ORDER GUIDE Amplifiers Type Appearance Fiber Selection Guide M8 plug-in connector type Cable set (Note 1) Viewing new models Standard type Choose by shape/ application M8 plug-in connector type Choose by model Fibers Super Quality Threaded Type Small Spot Narroe Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others M8 plug-in connector type M8 plug-in connector type Flat Type Cable set (Note 1) Sleeve FX-500 series FX-100 series INDEX NPN open-collector transistor FX-101-Z (Note 3) NPN open-collector transistor FX-101P (Note 2) PNP open-collector transistor FX-101P-Z (Note 3) PNP open-collector transistor FX-101-CC2 NPN open-collector transistor FX-101P-CC2 PNP open-collector collector transistor FX-102 (Note 2) NPN open-collector transistor FX-102-Z (Note 3) NPN open-collector transistor FX-102P (Note 2) PNP open-collector transistor FX-102P-Z (Note 3) PNP open-collector transistor FX-102-CC2 NPN open-collector transistor FX-102P-CC2 PNP open-collector transistor * CN-14A-C2 Connector attached cable 2 m 6.562 ft * Only include cable set type * FC-FX-1 (Protection cover) * It have been attached from the production at July, 2011. OPTIONS Designation Model No. CN-14A-C1 Connector attached cable Description 3 m 9.843 ft CN-14A-C5 5 m 16.404 ft CN-14A-R-C1 1 m 3.281 ft CN-14A-R-C2 2 m 6.562 ft CN-14A-R-C3 3 m 9.843 ft CN-14A-R-C5 5 m 16.404 ft M8 connector attached cable CN-24A-C2 2 m 6.562 ft CN-24A-C5 5 m 16.404 ft Connector CN-14A Set of 10 housings and 40 contacts End plates Copy unit * CN-24A-C o4 o0.157 CN-14A-C2 (Note 1) 2 m 6.562 ft CN-14A-C3 Connector attached cable (Flexible type) M8 connector attached cable 31.4 1.236 1 m 3.281 ft 0.2 mm2 4-core cabtyre cable with connector on one end Cable outer diameter: o3.7 mm o0.146 in For M8 plug-in connector type The connector on one end Cable outer diameter: o4 mm o0.157 in M8 connector attached cable CN-24A-C Amplifier mounting bracket * MS-DIN-4 Mounting bracket for amplifier Two pcs. per set When it moves depending on the way it is installed on a DIN rail, these end plates ensure that all amplifiers are mounted together in a secure and fully connected manner. SC-SU1 Copy the controller settings to other controllers. MS-DIN-E o9 o0.354 Fixing ring Note: The connector attached cable CN-14A-C2 is supplied with the cable set type FX-10-CC2. Connector attached cable * CN-14A(-R)-C Recommended connector Contact: SPHD-001T-P0.5, Housing: PAP-04V-S (Manufactured by J.S.T. Mfg. Co., Ltd.) Earlier models comparison table Accessory Notes: 1) The connector attached cable CN-14A-C2 is supplied with the amplifier. 2) Make sure to use the optional connector attached cable CN-14A(-R)-C or the connector CN-14A, or a connector manufactured by J.S.T. Mfg. Co., Ltd. (contact: SPHD-001T-P0.5, housing: PAP-04V-S) 3) Make sure to use the optional M8 connector attached cable CN-24A-C. Amplifier MS-DIN-4 mounting bracket Amplifiers Output FX-101 (Note 2) Red LED Long sensing range type Cylindrical Type Emitting element Model No. Note: Contact the manufacturer for details of the recommended products. Connector * CN-14A Contact Recommended crimping tool Model No.: YC-610R (Manufactured by J.S.T. Mfg. Co., Ltd.) Note: Contact the manufacturer for details of the recommended products. Housing 69 SPECIFICATIONS Model No. Type Item New product introduction Standard type Long sensing range type Cable set Cable set NPN output FX-101(-Z) (Note 5) FX-101-CC2 FX-102(-Z) (Note 5) FX-102-CC2 PNP output FX-101P(-Z) (Note 5) FX-101P-CC2 FX-102P(-Z) (Note 5) FX-102P-CC2 Supply voltage Power consumption Output 12 to 24 V DC 10 % Ripple P-P 10 % or less Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) Incorporated Threaded Type <NPN output type> NPN non-contact input * Signal condition High: +8 V to +V DC or Open Low: 0 to +2 V DC (Source current 0.5 mA or less) * Input impedance: 10 k approx. <PNP output type> PNP non-contact input * Signal condition High: +4 V to +V DC (Sink current 0.5 to 3 mA) Low: 0 to +0.6 V DC or Open * Input impedance: 10 k approx. Emission frequency 0: 250 s or less (factory default setting) Emission frequency 1: 450 s or less Emission frequency 2: 500 s or less Emission frequency 3: 600 s or less Sleeve Flat Type Small Spot Narroe Beam Wide Beam Retroreflective Type 4 digits (green) + 4 digits (red) LCD display Incorporated Chemicalresistant ON-delay / OFF-delay timer, switchable either effective or ineffective [Timer period: 1 ms, 5 ms, 10 ms, 20 ms, 40 ms, 50 ms, 100 ms, 500 ms, 1,000 ms] Heatresistant Attenuation function Environmental resistance Cylindrical Type Convergent Reflective Type Orange LED (lights up when the output is ON) Fine sensitivity adjustment function 3-level + Auto setting Incorporated Emission frequency selection method (Note 2) (Functions at emission frequency 1, 2 or 3) Incorporated Emission frequency selection method (Note 2) (Functions at emission frequency 1, 2, 3 or 4) -10 to +55 C +14 to +131 F (If 4 to 7 units are mounted close together: -10 to +50 C +14 to +122 F, if 8 to 16 units are mounted close together: -10 to +45 C +14 to +113 F) (No dew condensation or icing allowed), Storage: -20 to +70 C -4 to +158 F Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH Ambient illuminance Voltage withstandability Emission frequency 1: 2.5 ms or less (factory default setting) Emission frequency 2: 2.8 ms or less Emission frequency 3: 3.2 ms or less Emission frequency 4: 5.0 ms or less 2-point teaching / Limit teaching / Full-auto teaching Digital display Ambient temperature Viewing new models Super Quality Operation indicator Interference prevention function Choose by shape/ application Selectable either Light-ON or Dark-ON, at SET mode Sensitivity setting Timer function Choose by model Fibers Short-circuit protection Response time Fiber Selection Guide <NPN output type> <PNP output type> NPN open-collector transistor PNP open-collector transistor * Maximum sink current: 100 mA * Maximum source current: 100 mA * Applied voltage: 30 V DC or less (between output and 0 V) * Applied voltage: 30 V DC or less (between output and +V) * Residual voltage: 1.5 V or less (at 100 mA sink current) * Residual voltage: 1.5 V or less (at 100 mA source current) Output operation External input Tough Fiber Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Incandescent light: 3,000 x at the light-receiving face 1,000 V AC for one min. between all supply terminals connected together and enclosure (Note 3) Insulation resistance 20 M, or more, with 250 V DC megger between all supply terminals connected together and enclosure (Note 3) Vibration resistance 10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each Fiber Dimensions Thru-beam Type Shock resistance 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each Retroreflective Type Emitting element (modulated) Red LED (Peak emission wavelength: 632 nm 0.025 mil) Reflective Type Material Enclosure: Polycarbonate, Key switch: Polycarbonate, Fiber lock lever: PBT Connecting method Cable length Weight Accessory Connector (Note 4) Others Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. Net weight: 15 g approx. Gross weight: 35 g approx. Net weight: 15 g approx. Gross weight: 75 g approx. Net weight: 15 g approx. Gross weight: 35 g approx. FC-FX-1 (Protection cover): 1 pc. (Note 6) FC-FX-1 FC-FX-1 (Protection cover): 1 pc. (Note 6) CN-14A-C2 (Protection cover): 1 pc. (Note 6) (Connector attached cable, 2 m 6.562 ft long): 1 pc. Net weight: 15 g approx. Gross weight: 75 g approx. FC-FX-1 (Protection cover): 1 pc. (Note 6) CN-14A-C2 (Connector attached cable, 2 m 6.562 ft long): 1 pc. Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 C +73.4 F. 2) When using the interference prevention function, set the emission frequencies for the amplifiers to be covered by the interference prevention function to different frequency values. However, the interference prevention function does not operate at emission frequency 0 (factory default setting) for the FX-101(P)(-Z) / FX-101(P)-CC2. 3) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. 4) Connector attached cable CN-14A-C2 is not attached to the models that have no "-CC2" at the end of the model Nos. Make sure to use the optional connector attached cable CN-14A(-R)-C or the connector CN-14A, or a connector manufactured by J.S.T. Mfg., Ltd. (contact: SPHD-001T-P0.5, housing: PAP-04V-S). 5) Model Nos. having the suffix "-Z" are M8 plug-in connector type. Make sure to use the optional M8 attached connector cable CN-24A-C. 6) Protection cover FC-FX-1 has been attached from the production at July, 2011. Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 70 I/O CIRCUIT AND WIRING DIAGRAMS New product introduction Tough Fiber FX-10(-Z/-CC2) NPN output type I/O circuit diagram Terminal arrangement diagram Fiber Selection Guide Terminal No. Choose by model Viewing new models Sleeve Flat Type Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant (Black) Output 3 Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table *1 (Blue) 0 V 2 Output 3 External input 4 0V Users' circuit M8 plug-in connector type Terminal No. *1 1 or 3 Function +V 2 Output Non-voltage contact or NPN open-collector transistor External input 4 0V High (+8 V to +V DC, or open): Ineffective Low [0 to +2 V DC (source current 0.5 mA or less)]: Effective FX-10P(-Z/-CC2) PNP output type I/O circuit diagram Terminal arrangement diagram Terminal No. Connector type Color code of cable with connector Sensor circuit 1 3 D *1 (White) External input ZD Tr Terminal No. (Brown) +V 100 mA max. 2 4 (Black) Output (Blue) 0 V Internal circuit Fiber Dimensions 12 to 24 V DC 10 % Symbols ... D : Reverse supply polarity protection diode ZD: Surge absorption zener diode Tr : NPN output transistor Vacuumresistant Fiber Options + - Function +V 1 (White) External input Heatresistant Liquid Leak / Liquid Detection Load 100 mA max. ZD Small Spot Narroe Beam Terminal No. (Brown) +V Internal circuit Super Quality Cylindrical Type +8 V 2 Tr 4 Fibers Threaded Type 1 D Sensor circuit Choose by shape/ application Connector type Color code of cable with connector Load +V 1 + - 12 to 24 V DC 10 % Function 2 Output 3 External input 4 0V Users' circuit Symbols ... D : Reverse supply polarity protection diode ZD: Surge absorption zener diode Tr : PNP output transistor M8 plug-in connector type Terminal No. 1 *1 Non-voltage contact or PNP open-collector transistor or High [ +4 V to +V DC (sink current 0.5 to 3 mA)]: Effective Low (0 to +0.6 V DC, or open): Ineffective 3 Function +V 2 4 Output External input 0V 71 Refer to the "Operation Guide" on our website for details pertaining to operating instructions for the amplifier. PRECAUTIONS FOR PROPER USE * Never use this product as a sensing device for personnel protection. * In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. Using in combination with the FX-300 / FX-410 series * The FX-100 series does not use the horizontal connectors that are used with the FX-300 / FX-410 series. Please note that horizontal connection cannot be performed using a connector attached cable. In addition, the optical communication function is not equipped on the FX-100 series, so it is unable to perform interference prevention for use with the FX-300 / FX-410 series. If using the FX-100 series together with the FX-300 / FX-410 series side-by-side, please set the same models together in groups. Mounting <When using a DIN rail> How to mount the amplifier Fit the rear part of the mounting section of the amplifier on a 35 mm 1.378 in width DIN rail. Press down the rear part of the mounting section of the unit on the 35 mm 1.378 in width DIN rail and fit the front part of the mounting section to the DIN rail. 1 * Make sure that the power supply is OFF while adding or removing the amplifiers. * Note that if a voltage exceeding the reted range is applied, or if an AC power supply is directly connected, the product may get burnt or damaged. * Note that short-circuit of the load or wrong wiring may burn or damage the product. * Do not run the wires together with high-voltage lines or power lines, or put them in the same raceway. This can cause malfunction due to induction. * Verify that the supply voltage variation is within the rating. * If power is supplied from a commercial switching regulator, ensure that the frame ground (F.G.) terminal of the power supply is connected to an actual ground. * In case noise generating equipment (switching regulator, inverter motor, etc.) is used in the vicinity of this product, connect the frame ground (F.G.) terminal of the equipment to an actual ground. * Make sure to use the quick-connection cable (optional) for the connection of the controller. Extension up to total 100 m 328.084 ft is possible with 0.3 mm2 or more, cable. However, in order to reduce noise, make the wiring as short as possible. Operation indicator (Orange) Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Narroe Beam Wide Beam Convergent Reflective Type ON key / Setting value UP key OFF key / Setting value DOWN key Chemicalresistant Heatresistant MODE key Vacuumresistant Digital display (Green) (Threshold value) 2 Fiber Selection Guide Retroreflective Type 35 mm 1.378 in width DIN rail How to remove the amplifier Push the amplifier forward. Lift up the front part of the amplifier to remove it. Tough Fiber Wiring Part description 2 New product introduction Digital display (Red) (Incident light intensity) Liquid Leak / Liquid Detection 1 Setting mode * Setting mode appears after the MODE key is pressed for 2 sec. in RUN mode. Note: Take care that if the front part is lifted without pushing the amplifier forward, the hook on the rear portion of the mounting section is likely to break. <When using screws with washers> * Use M3 screws with washers for mounting. The tightening torque should be 0.5 N*m or less. Setting item Factory setting Teaching mode Output operation setting Timer operation setting M3 screw with washer Timer setting Emission amount setting Description Threshold value can be set in 2-point teaching, limit teaching, or full-auto teaching. [Dark-ON] Light-ON or Dark-ON can be set. Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others [Without timer] Without timer, ON delay timer, or OFF delay timer can be set. In case of setting ON-delay timer or OFF-delay Amplifiers can be set. When timer is not set, this mode is FX-500 series [ON-delay timer: 10 ms] timer in the timer operation setting mode, timer [OFF-delay timer: 10 ms] not displayed. Level 3 Setting for reduced intensity of emission amount is possible when the incident light intensity is saturated. FX-101 Emission frequency setting Fiber Options 0 (Response time: 250 s or less) FX-102 1 (Response time: 2.5 ms or less) In case of using the fiber heads in parallel, interference can be prevented by setting different emission frequency. However, when emission frequency 0 is set, interference cannot be prevented. Response time corresponds to emission frequency. FX-100 series INDEX Earlier models comparison table 72 New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application PRECAUTIONS FOR PROPER USE PRO mode * PRO mode appears after the MODE key is pressed for 4 sec. in RUN mode. Setting item Factory setting Shift setting Viewing new models Fibers External input setting Super Quality Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Narroe Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Threshold value-storing setting mode (Note 2) Threshold value follow-up cycle setting (Note 3) GETA function setting (Note 4, 5) [OFF] [OFF] [OFF] Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type ECO setting Digital display inversion setting Threshold value margin setting [OFF] [OFF] [OFF] Reflective Type Others Setting copy Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table Reset Description Shift amount can be selected from 0 to 80 % in the limit teaching. Select 0 % when it is desired [Shift amount 15 %] to set the present incident light intensity as a threshold value. External input can be selected from emission halt, limit teaching [+], limit teaching [-], full-auto teaching, ECO (Note 1), 2-point teaching or emission amount test. When setting the incident ", output turns ON / light intensity test " OFF every 100ms when the rate of incident [Emission halt] light intensity and threshold value is less than half of the set shift amount (for example, when the rate of incident light intensity and threshold value is within 10 % for 20 % of shift amount) at external input. [NO] [NO] Threshold value set at the limit teaching, full-auto teaching or 2-point teaching by external input is stored. When selecting Auto in the emission amount setting mode, the set emission amount level is also stored. When incident light intensity exceeds threshold value, this mode can change the threshold value with each set cycle depending on variations of the incident light intensity. The follow-up shift amount is same as the one set in the shift setting mode. However, the threshold value is not stored. Variations can be reduced by correcting the present incident light intensity in each amplifier to a target value. Target value to offset incident light intensity can be selected from 0 to 2,000 by 100 unit each. For example, if the target value is set to 2,000 when the incident light intensity is 1,500, the incident light intensity becomes 2,000. It is possible to light up / turn off the digital display. When ECO setting mode is ON, the display turns off in 20 sec. approx. in RUN mode. To light up the display again, press any key for 2 sec. or more. Digital display can be inverted. Margin for threshold value to the present incident light intensity can be checked. When there is no margin, it is possible to make the digital display blink. : Set to "OFF": does not function. : Green blinks. : Red blinks. : Red and green blink. : When conducting limit teaching or 2-point teaching by external input, in case the rate of reference incident light intensity and threshold value after teaching is 200% or more, or in case it is less than half of the shift amount, output turns ON / OFF every 100 ms. (Note 6) The settings of the master side amplifier can be copied to the slave side amplifier. For details, refer to "Setting copy function". Returns to default settings (factory settings.) Notes: 1) When ECO is selected at the external input setting mode, key operation on the main body is invalid during external input. 2) This mode is not indicated unless any of " ", " ", " or " " is set at the external input setting mode. " 3) If the incident light intensity becomes "300" or less, the follow-up operation stops. In that condition, threshold value [digital display (green)] blinks. This function can be used when thru-beam type or retroreflective type fiber is applied to this product. If reflective type fiber is applied, the function cannot be used depending on use conditions. 4) If MODE key is pressed in RUN mode when GETA function is used, the incident light intensity before setting GETA function is displayed on the red digital display for 2 sec. approx. 5) When GETA function is used in saturation of incident light intensity (4,000 or more,) " " is indicated on the red digital display. Correction value is up to 4,000. 6) This mode does not operate unless any of " ", " " or " is set at the external input setting mode. " Refer to the "Operation Guide" on our website for details pertaining to operating instructions for the amplifier. Setting copy function * This can copy the settings of the master side amplifier to the slave side amplifier. * Be sure to use the setting copy function between the identical models (Between FX-101 models or FX-102 models). This function cannot be used between different models. * Only one sensor can be connected on slave side with a master side sensor for the setting copy function. * Threshold value, output operation setting, timer operation setting, timer setting, light-emitting amount setting, shift setting, external input setting, threshold value margin setting, ECO setting, digital display inversion setting, and threshold value margin setting can be copied. <Setting procedures> Set the setting copy mode of the master side amplifier to "Copy sending ON", and press the MODE key so that " " is shown on the digital display and the sensor is in copy ready state. For the setting method, refer to "Operation guide". Turn off the master side amplifier. Connect the master side amplifier with the slave side amplifier as shown below. Color code of cable with connector Master side amplifier (Brown) +V (Black) Input (White) External input + - 12 to 24V DC 10 % (Blue) 0 V Slave side amplifier (Brown) +V (Black) Input (White) External input (Blue) 0 V Turn on the master side amplifier and the slave side amplifier at the same time. (Note) " " is shown on the green digital display of the master side amplifier and 4-digit code is shown on the red digital display of it, then the copying starts. During copy communication, " " is shown on the green digital display of the slave side amplifier, and the ongoing copy communication indicator (" "" "" " "" "" "" "" ") is displayed on " the red digital display. When the copying is completed, " " is shown on the green digital display of the slave side amplifier, while the 4-digit code (the same code as the master side amplifier) is shown on the red digital display of it. Turn off the power of the master side amplifier and the slave side amplifier and disconnect the wire. * If copying the settings to another amplifier repeatedly, follow the steps to . Note: Take care that if the power is not turned on at the same time, the setting contents may not be copied. <To cancel the setting copy mode of the master side amplifier> W hile the slave side amplifier is disconnected, turn on the power of the master side amplifier. Press the MODE key for 2 sec. approx. 73 Refer to the "Operation Guide" on our website for details pertaining to operating instructions for the amplifier. PRECAUTIONS FOR PROPER USE Others Code setting function * The code setting function makes it possible to set the output operation, timer operation, amount of light emitted, frequency of light emitted, ECO setting, external input, and amount of shift by selecting a code of one's choice. * While in the RUN Mode, pressing and holding both the ON key ( ) and OFF key ( ) simultaneously for 4 seconds will switch to the code setting function. 1st digit Output Timer operation (Note 1) 2nd digit 3rd digit Emission frequency Shift (Note 1) 5% non 0 1 Emission halt ond 10 ms 1 2 Limit teaching [+] 2 3 Level 3 (OFF) D-ON <Table of quick setting numbers> No. Output operation Timer Emission amount setting D-ON non Level 3 (OFF) D-ON non Level 2 (ON) D-ON ofd 10 ms Level 3 (OFF) D-ON ofd 10 ms Level 2 (ON) D-ON ofd 40 ms Level 3 (OFF) D-ON ofd 40 ms Level 2 (ON) D-ON ond 10 ms Level 3 (OFF) D-ON ond 10 ms Level 2 (ON) D-ON ond 40 ms Level 3 (OFF) D-ON ond 40 ms Level 2 (ON) L-ON ond 40 ms Level 2 (ON) L-ON ond 40 ms Level 3 (OFF) L-ON ond 10 ms Level 2 (ON) L-ON ond 10 ms Level 3 (OFF) L-ON ofd 40 ms Level 2 (ON) L-ON ofd 40 ms Level 3 (OFF) L-ON ofd 10 ms Level 2 (ON) L-ON ofd 10 ms Level 3 (OFF) L-ON non Level 2 (ON) L-ON non Level 3 (OFF) ond 40 ms Fiber Selection Guide Choose by model Choose by shape/ application OFF Limit teaching [-] 10 % 15 % ofd 10 ms 3 4 ofd 40 ms 0 1 ECO 25 % non 1 2 Emission halt 30 % ond 10 ms 2 3 Limit teaching [+] 35 % ond 40 ms 3 4 Limit teaching [-] 40 % ofd 10 ms 0 1 Full-auto teaching 45 % ofd 40 ms 1 2 ECO 50 % 2 3 2-point teaching ON 20 % Level 1 OFF 3 4 Incident light intensity test 0 1 2-point teaching ON 1 2 2 3 3 4 Fibers Super Quality Threaded Type Cylindrical Type Sleeve Full-auto teaching Level 2 (ON) L-ON 4th digit Emission External ECO amount input setting FX-101 FX-102 Quick setting function * The quick setting function makes it possible to set the content of the SET Mode (output operation, timer operation, amount of light emitted, and frequency of light emitted) simply by selecting a setting number. * While in the RUN Mode, pressing and holding both the ON key ( ) and OFF key ( ) simultaneously for 2 seconds will switch to the quick setting function. Tough Fiber Viewing new models <Code table> Code * Our products have been developed / produced for industrial use only. * Do not use during the initial transient time (0.5 sec.) after the power supply is switched on. * Take care that the product is not directly exposed to fluorescent lamp from a rapid-starter lamp, a high frequency lighting device or sunlight etc., as it may affect the sensing performance. * This product is suitable for indoor use only. * Avoid dust, dirt, and steam. * Take care that the product does not come in contact with oil, grease, organic solvents, such as thinner, etc., strong acid or alkaline. * This product cannot be used in an environment containing inflammable or explosive gases. * Never disassemble or modify this product. * EEPROM is adopted to this product. It is not possible to conduct teaching 100 thousand times or more, because of the EEPROM's lifetime. New product introduction Incident light intensity test Auto Notes: 1) When the present setting is out of the code setting range, " " is shown. When " " is selected, the set content of the digit is not changed. 2) The factory setting is " ". Flat Type Small Spot Narroe Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 74 New product introduction Tough Fiber DIMENSIONS (Unit: mm in) FX-101 FX-102 Fiber Selection Guide 0.8 0.031 Choose by model Choose by shape/ application Amplifier 48 1.890 30 1.181 20 13.2 0.787 0.520 6 0.236 2.7 0.106 0.7 0.028 66.2 2.606 9 0.354 7 0.276 10 3 0.118 0.394 6.5 0.256 Narroe Beam o3.2 o0.126 50 1.969 35 1.378 65.5 2.579 14.5 0.571 o7.2 mm o0.283 in spot facing, 4 0.157 deep o6.2 mm o0.244 in spot facing, 3 0.118 deep Retroreflective Type 5 0.197 Material: PBT 0.079 Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table (0.3158 ) ( 35 1.378 ) 14.5 0.571 50 1.969 35 1.378 65.5 2.579 Suitable for 35 mm 1.378 in width DIN rail 3.2 0.126 2.75 0.108 3 0.118 15 0.591 9 0.354 3.2 0.126 Suitable for 35 mm 1.378 in width DIN rail End plate (Optional) M3 (Iength 18 mm 0.709 in) pan head screws 60 2.362 3 0.118 6.2 mm 0.244 in spot facing, 3 0.118 deep o3.2 o0.126 10 30 0.3941.181 3.2 8.1 0.126 0.319 2 0.079 MS-DIN-E 7.2 mm 0.283 in spot facing, 4 0.157 deep 1 0.039 15 0.591 o6.5 o0.256 Note: The protection cover has been attached from the production at July, 2011. 1.6 0.063 1 0.039 24.5 0.965 35 1.378 M3 square nut 5.6 0.220 24.7 0.972 32 1.260 4 0.157 Suitable for 35 mm 1.378 in width DIN rail Material: Polycarbonate CN-14A-C CN-14A-R-C Reflective Type 3 0.118 o3.2 o0.126 6.5 0.256 11.5 0.453 4 0.157 4 0.157 10 1 0.039 0.8 0.031 0.394 3.2 2 0.126 o3.2 o0.126 9.25 0.364 Fiber Options Thru-beam Type 7 0.276 Amplifier mounting bracket (Optional) Vacuumresistant Fiber Dimensions 6 0.236 1.1 0.043 Note: The protection cover has been attached from the production at July, 2011. MS-DIN-4 66.2 2.606 9 0.354 8.1 0.319 Heatresistant Liquid Leak / Liquid Detection Digital display (Green, Red) 2 0.079 10 30 0.394 1.181 0.8 0.031 4 0.157 Small Spot Chemicalresistant 0.7 0.028 OFF key / Setting value DOWN key ON key / Setting value UP key MODE key 4.1 Operation indicator (Orange) 0.161 0.75 0.030 2 0.079 6 0.236 1.1 0.043 Flat Type Retroreflective Type 2.7 0.106 0.75 0.030 Sleeve Convergent Reflective Type 6 0.236 6 0.236 0.427 48 1.890 30 1.181 20 13.2 0.787 0.520 0.8 0.031 OFF key / Setting value DOWN key ON key / Setting value UP key MODE key Digital display (Green, Red) Cylindrical Type Wide Beam Amplifier 10.85 Fibers Threaded Type FX-101(P)-ZFX-102(P)-Z 6 0.236 4.1 Operation indicator (Orange) 0.161 Viewing new models Super Quality The CAD data in the dimensions can be downloaded from our website. Connector attached cable (Optional) L ( ) 50 1.969 o3.7 o0.146 cable CN-14A-C2 is attached FX-101(P)-CC2 / FX-102(P)-CC2 * Length L (0.3158 ) Model No. CN-14A(-R)-C1 CN-14A(-R)-C2 CN-14A(-R)-C3 CN-14A(-R)-C5 Length L 1,000 39.370 2,000 78.740 3,000 118.110 5,000 196.850 75 76 New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table INDEX C CN-14A CN-14A-C1 CN-14A-C2 CN-14A-C3 CN-14A-C5 CN-14A-R-C1 CN-14A-R-C2 CN-14A-R-C3 CN-14A-R-C5 CN-71-C1 CN-71-C2 CN-71-C5 CN-72-C1 CN-72-C2 CN-72-C5 CN-73-C1 CN-73-C2 CN-73-C5 CN-74-C1 CN-74-C2 CN-74-C5 FX-100 Connector P.68 FX-100 Connector Attached Cable P.68/P.74 FX-100 Connector Attached Cable (Flexible) FX-500 Quick-connection Cable P.58/P.64 F FB-1 Fiber Bender FC-FX-1 FD-30 FD-31 FD-31W FD-32G FD-32GX FD-40 FD-41 FD-41S FD-41SW FD-41W FD-42G FD-42GW FD-60 FD-61 FD-61G FD-61S FD-61W FD-62 FD-64X FD-A16 FD-AL11 FD-E13 FD-E23 FX-100 Protection Cover Super Quality Fiber Threaded Type Fiber Threaded / Small Spot Type Fiber P.14/P.33/P.51 P.68 P.9/P.42 P.11/P.42 P.11/P.18/P.42 Super Quality Fiber Threaded Type Fiber P.9/P.42 P.11/P.42 Sleeve Fiber P.15/P.42 Threaded Type Fiber P.11/P.42 Threaded / Small Spot Type Fiber Super Quality Fiber P.11/P.18/P.43 P.9/P.43 Threaded Type Fiber P.11/P.43 Sleeve Fiber P.15/P.43 Threaded Type Fiber P.11/P.43 P.11/P.44 Wide Beam Fiber P.20/P.44 Cylindrical / Sleeve Fiber P.13/P.15/P.44 FD-EG30 Threaded / Small Spot Type Fiber P.11/P.18/P.44 FD-EG30S Sleeve Fiber FD-EG31 Threaded / Small Spot Type Fiber P.11/P.18/P.45 FD-F4 FD-F41 FD-F41Y FD-F71 FD-F8Y FD-FA93 Liquid Leak / Liquid Detection Fiber P.28/P.45 P.15/P.45 FD-G40 FD-G60 FD-H13-FM2 FD-H18-L31 FD-H20-21 FD-H20-M1 FD-H25-L43 FD-H25-L45 FD-H30-KZ1V FD-H30-KZ1V-S FD-H30-L32 FD-H30-L32V FD-H30-L32V-S FD-H35-20S FD-H35-M2 FD-H35-M2S6 FD-HF40Y FD-L10 FD-L11 FD-L12W FD-L20H FD-L21 FD-L21W FD-L22A FD-L23 FD-L30A FD-L31A FD-L32H FD-R60 FD-S21 FD-S30 FD-S31 FD-S32 FD-S32W FD-S33GW FD-V30 FD-V30W FD-V50 FD-WZ4 FD-WZ7 FD-Z20HBW FD-Z40HBW FD-Z50HW FDP-1000 FDP-1500 FDP-500 FDP-N1000 FDP-N1500 FDP-N500 FR-KZ22E FR-KZ50E FR-KZ50H FR-Z50HW FT-140 FT-30 FT-31 FT-31S FT-31W FT-40 FT-41 FT-42 FT-42S Metal-free Fiber Heat-resistant Fiber P.10/Website P.25/P.46 Vacuum-resistant Fiber P.27/P.32 P.26/P.47 P.25/P.47 P.27/P.32 P.26/P.47 Heat-resistant Fiber P.25/P.47 Liquid Leak / Liquid Detection Fiber P.28/P.47 Convergent Reflective Type Fiber P.21/P.48 Vacuum-resistant Fiber Heat-resistant Fiber Threaded Type Fiber Cylindrical Fiber Super Quality Fiber P.21/P.49 P.11/P.49 P.13/P.49 P.9/P.49 Cylindrical Fiber P.13/P.49 Sleeve Fiber P.15/P.50 Flat Type Fiber P.17/P.50 Narrow Beam Fiber P.19/P.50 Protective Tube (For Reflective Type Fiber) P.33/P.51 Narrow Beam / Retroreflective Type Fiber Threaded Type Fiber Super Quality Fiber Threaded Type Fiber Sleeve Fiber Threaded Type Fiber Super Quality Fiber Metal-free Fiber Threaded Type Fiber Sleeve Fiber P.19/P.22/P.41 P.10/P.34 P.9/P.34 P.10/P.34 P.15/P.34 P.10/P.34 P.9/P.34 P.10/Website P.10/P.34 P.15/P.34 77 INDEX FT-42W FT-43 FT-45X FT-A11 FT-A11W FT-A32 FT-A32W FT-AL05 FT-E13 FT-E23 FT-F93 FT-H13-FM2 FT-H20-J20 FT-H20-J20-S FT-H20-J30 FT-H20-J30-S FT-H20-J50 FT-H20-J50-S FT-H20-M1 FT-H20-VJ50 FT-H20-VJ50-S FT-H20-VJ80 FT-H20-VJ80-S FT-H20W-M1 FT-H30-M1V FT-H30-M1V-S FT-H35-M2 FT-H35-M2S6 FT-HL80Y FT-J8 FT-KS40 FT-KV26 FT-KV40 FT-KV40W FT-L80Y FT-R40 FT-R41W FT-R42W FT-S11 FT-S20 FT-S21 FT-S21W FT-S30 FT-S31W FT-S32 FT-V23 FT-V24W FT-V25 FT-V30 FT-V40 FT-V80Y FT-WZ4 FT-WZ7 FT-Z20HBW FT-Z30 FT-Z30E FT-Z30EW FT-Z30H FT-Z30HW FT-Z30W FT-Z40HBW FT-Z802Y Threaded Type Fiber P.10/P.34 P.10/P.35 Wide Beam Fiber P.20/P.35 FTP-1000 FTP-1500 FTP-500 FTP-N1000 FTP-N1500 FTP-N500 Protective Tube (For Thru-beam Type Fiber) FV-BR1 Photo-terminal for Vacuum-resistant Fiber P.27/P.32/P.51 Vacuum-resistant Expansion Lens Vacuum-resistant Side-view Lens P.27/P.31/P.51 Chemical-resistant Fiber P.23/P.37 Threaded Type Fiber P.10/P.37 Cylindrical Fiber Super Quality Fiber P.12/P.37 P.9/P.38 FV-LE1 FV-SV2 FX-101 FX-101-CC2 FX-101P FX-101P-CC2 FX-102 FX-102-CC2 FX-102P FX-102P-CC2 FX-501 FX-501P FX-502 FX-502P FX-505-C2 FX-505P-C2 FX-AT15A FX-AT2 FX-AT3 FX-AT4 FX-AT5 FX-AT6 FX-CT1 FX-CT2 FX-CT3 FX-LE1 FX-LE2 FX-MB1 FX-MR1 FX-MR2 FX-MR3 FX-MR5 FX-MR6 Cylindrical Fiber P.12/P.38 FX-SV1 Cylindrical / Sleeve Fiber Liquid Leak / Liquid Detection Fiber Heat-resistant Fiber P.12/P.15/P.35 P.28/P.35 P.24/P.35 P.25/P.32 P.24/P.36 P.25/P.32 P.24/P.36 P.25/P.32 P.24/P.36 P.25/P.32 P.24/P.36 P.25/P.32 P.24/P.36 Vacuum-resistant Fiber P.27/P.32 P.26/P.36 Heat-resistant Fiber P.24/P.36 Chemical-resistant Fiber P.23/P.36 Fiber for Atmospheric Side Narrow Beam Fiber Super Quality Fiber Cylindrical Fiber Sleeve Fiber Cylindrical Fiber Chemical-resistant Fiber P.27/P.32/P.51 P.19/P.37 Tough Fiber P.33/P.51 Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers P.68/P.74 Super Quality Threaded Type Cylindrical Type Digital Fiber Sensor Sleeve Flat Type P.58/P.64 Small Spot Narrow Beam Fiber Single-core Holder Fiber Attachment P.33 P.32/P.52 Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Fiber Cutter P.32 P.32/P.52 P.32 Lens for Thru-beam Type Fiber P.30/P.52 FX-500 Fiber Amplifier Protection Seal Side-view Lens for Thru-beam Type Fiber Vacuumresistant Liquid Leak / Liquid Detection P.59 P.18/P.32/P.52 Lens for Reflective Type Fiber Heatresistant P.18/P.32/P.53 P.31/P.53 Fiber Options Fiber Dimensions Thru-beam Type P.9/P.38 Retroreflective Type P.12/P.38 Reflective Type P.15/P.38 P.12/P.39 P.23/P.39 P.16/P.39 Flat Type Fiber P.16/P.40 Chemical-resistant Fiber New product introduction P.23/P.40 M MS-AJ1-F MS-AJ2-F MS-DIN-2 MS-DIN-4 Universal Sensor Mounting Stand MS-DIN-E End Plate MS-EX3 FX-MR2 Mounting Bracket MS-FD-2 MS-FD-3 MS-FD-F7-1 MS-FD-F7-2 MS-FX-01Y MS-FX-02Y MS-FX-03Y MS-FX-YF FX-500 Amplifer Mounting Bracket FX-100 Amplifer Mounting Bracket Fiber Mounting Bracket Others P.33 P.59/P.64 P.68/P.74 Amplifiers P.58/P.64/P.68/ P.74 FX-500 series P.53 P.27/P.32/P.53 P.53 FD-F71 SUS Mounting Bracket FD-F71 PVC Mounting Bracket Liquid Inflow Prevention Joint Protective Tube Extension Joint Fiber Mounting Joint Joint Internal Ferrulre FX-100 series INDEX P.29 P.29/P.33 Earlier models comparison table 78 New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table INDEX R RF-003 RF-13 RF-210 RF-220 RF-230 S SC-SU1 FR-KZ50E/KZ50H Exclusive Reflector Reflective Tape Reflector Copy Unit P.32/P.53 P.32 P.22/P.33/P.54 P.68 79 80 Earlier Models Comparison Table New product introduction Advantages of switching to recommended replacements Tough Fiber Fiber Selection Guide Choose by model The quality of many models has been improved by shortening their bending radii and achieving better bending performance. The number of part numbers has been reduced, letting you reduce the part numbers to keep track of and service parts to keep on hand. We have reduced our environmental impact further by making fiber end bracket out of stainless steel and plastic, which contain no RoHS substances. Subjected models Choose by shape/ application Viewing new models Discontinued models Stopping taking order date : 31 Mar., 2012 Type Discontinued models Model No. Fibers Super Quality Bending radius (mm) Shape of fiber head (mm) R25 FD-A15 Threaded Type Bend- Sensing ing range dura- FX-500 bility STD (mm in) W7xH15xD30 200 7.874 Top sensing Cylindrical Type R25 FD-AFM2 Sleeve 280 11.024 Recommended replacements Model No. Shape of fiber head (mm) Side sensing R25 FD-AFM2E Small Spot W5xH20xD20 Narrow Beam M6 Wide Beam R25 FD-B8 15 Convergent Reflective Type 1.5 0.5 Retroreflective Type FD-E12 R10 15 3 FD-AL11 R25 490 19.291 FD-62 M6 15 5 15 3 55 2.165 15 5 Coaxial, Lens mountable Reflective type High precision * Coaxial Lens mountableFX-MR3FX-MR6 Fiber Dimensions Reflective Type 40 1.575 FD-EG30 M3 FD-EG3 High precision * Coaxial Lens mountableFX-MR3FX-MR6 Light emitting fiber element 0.125 M3 End bracket total length for the M6 part only: 15 mm Changed to 17 mm (M6 part/15 mm + o4.5 area/2 mm ) R4 12 0.472 Split amplifier insertion section configuration Changed to integrated light emitting/receiving configuration R4 55 2.165 Split amplifier insertion section configuration Changed to integrated light emitting/receiving configuration M3 Split amplifier insertion section configuration Changed to 48 integrated light emitting / receiving 1.890 configuration End bracket total length 17 mm Changed to 16 mm Split amplifier insertion section configuration Changed to integrated 20 light emitting/receiving configuration End bracket total length 17 mm 0.787 Changed to 16 mm Protective tube outside diameter o1.6 Changed to o1.2 R4 Split amplifier insertion section configuration Changed to integrated 20 light emitting/receiving configuration End bracket total length 17 mm 0.787 Changed to 16 mm Protective tube outside diameter o1.6 Changed to o1.2 R4 50 1.969 Split amplifier insertion section configuration Changed to integrated light emitting /receiving configuration Sleeve size o0.5 Changed to o0.8 R4 50 1.969 Split amplifier insertion section configuration Changed to integrated light emitting/receiving configuration R4 16 Coaxial, Lens mountable R10 24 0.945 FD-EG31 M3 R4 16 17 Thru-beam Type Retroreflective Type R25 17 FD-EG2 520 20.472 3 0.65 FD-E23 Liquid Leak / Liquid Detection High precision * Coaxial Lens mountableFX-MR3FX-MR6 Light emitting fiber element 0.175 1.5 0.48 FD-E13 Sleeve part cannot be bent. Fiber Options R4 17 Sleeve part cannot be bent. M3 W5xH20xD20 Vacuumresistant FD-EG1 R2 Coaxial, Lens mountable R10 20 0.787 FD-EG31 M3 16 17 Others M3 FD-EN500S1 FX-500 series FX-100 series 15 15 Coaxial R25 15 15 50 1.969 FD-EG30S FD-F705 INDEX R4 (Protective Liquid leak tube detection R20) Mountable on pipe * Array fiber R10 FD-FA90 W6.5xH28.3xD17 0.8 15 M3 0.8 15 Sleeve part cannot be bent. Sleeve part cannot be bent. W20xH30xD10 M3 Sleeve 15 mm R25 SEMI S2 compliant Earlier models comparison table FD-EG30S Sleeve part cannot be bent. 0.8 M3 FD-ENM1S1 Cable lead out orientation changed 320 Metal casing material (brass) 12.598 Changed to plastic (PPS) Sleeve 15 mm 0.5 Sleeve part cannot be bent. Amplifiers 320 Cable lead out orientation changed Metal case material (brass) 12.598 Changed to plastic (PPS) Sleeve part cannot be bent. 3 0.65 FD-E22 W5xH20xD20 Coaxia Heatresistant R2 7RXJK Sleeve part cannot be bent. Chemicalresistant 7RXJK FD-AL11 200 7.874 R4 W7xH15xD30 280 11.024 12 0.472 Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) 7RXJK FD-A16 W5xH20xD20 Flat Type Bending radius (mm) Liquid detection 7RXJK SEMI S2 compliant W20xH30xD10 FD-F71 7RXJK R4 (Protective Liquid leak tube detection R20) Array fiber R4 FD-FA93 W6.5xH28.3xD17 Liquid detection 81 Earlier Models Comparison Table Type Discontinued models Model No. Bending radius (mm) Shape of fiber head (mm) Bend- Sensing ing range dura- FX-500 bility STD (mm in) New product introduction Recommended replacements Model No. Shape of fiber head (mm) Bending radius (mm) Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) 7RXJK M6 R4 FD-61 Coaxial M6 R25 FD-FM2 20 420 16.535 17 7RXJK Coaxial M6 FD-61G R4 17 Sleeve 90 mm FD-FM2S M6 2.5 20 Sleeve 40 mm FD-FM2S4 M6 2.5 20 FD-G4 R25 Sleeve R10 R25 Sleeve R10 Minute objects can be detected due to the small spot beam. Coaxial * Lens mountable FX-MR1/MR2/MR3/MR5/MR6 7RXJK 380 14.961 FD-61S 380 14.961 FD-61S 7RXJK 7RXJK R25 M4 140 5.512 FD-42G 140 5.512 FD-32G Sleeve 40 mm M6 2.5 20 Sleeve 40 mm M6 2.5 20 End bracket total length of 20 mm for the (M6 part/15 mm + o3.5 area/5 mm) 450 Changed to 17 mm (M6 part/15 mm 17.717 + o4.5 area/2 mm) Coaxial cable used for wiring Changed to parallel type 420 16.535 R4 Sleeve R10 R4 Sleeve R10 420 16.535 200 7.874 End bracket total length of 20 mm for the (M6 part/15 mm + o3.5 area/5 mm) Changed to 17 mm (M6 part/15 mm + o4.5 area/2 mm) 420 The sleeve length 90 mm type 16.535 supports semi-custom products. FD-G6 M3 R25 7RXJK R2 Coaxial * Lens mountable 17 17 FD-G6X Metal-jacketed Lens mountableFX-MR3FX-MR6 Coaxial M3 R25 170 6.693 M3 FD-L4 R10 1.5 to 16 0.059 to 0.630 Reflective type Glass substrate detection FD-L41 W24xH21xD4 Glass substrate detection * Alignment FD-L43 15.5 0.610 R25 0 to 24 0 to 0.945 FD-L44 R10 W12xH19xD3 FD-L44S Glass substrate detection * Seating confirmation R10 W12xH19xD3 Glass substrate detection * Alignment 0 to 5 0 to 0.197 7RXJK 7RXJK 0 to 40 0 to 1.575 R25 FD-L45A W23.5xH29xD4.5 Glass substrate detection * Mapping R25 FD-L46 FD-L47 W25xH7.3xD30 Glass substrate detection * Seating confirmation R4 1 to 56 0.039 to 2.205 0 to 29 0 to 1.142 FD-NFM2 R25 17 Sleeve 90 mm M4 FD-NFM2S 12 1.48 R25 Sleeve R10 120 4.724 120 4.724 R4 0 to 9.5 0 to 0.374 Fiber Dimensions 0 to 5 0 to 0.197 R4 Liquid Leak / Liquid Detection Thru-beam Type Retroreflective Type 0 to 43 0 to 1.693 R4 R4 4 to 33 0.157 to 1.299 Alignment FD-L31A Vacuumresistant Reflective Type Alignment W23.5xH29xD4.5 Others Previous no flexing distance specifications Specification wording changed to state flexing 2 degrees (Reference: Discontinued model 2 degrees specification is 10 mm to 32 mm) Mapping R4 FD-L32H 0 to 56 0 to 2.205 0 to 29 0 to 1.142 W25xH7.3xD30 7RXJK R2 FD-L23 W18xH29xD3.8 7RXJK FD-41 7RXJK FD-41S M4 R2 End bracket total length of 17 mm for 125 the (M4 part/12 mm + o2.5 area/5 mm) 4.921 Changed to 14 mm (M4 part/12 mm + o2.5 area/2 mm) R2 Sleeve R10 125 The sleeve length 90 mm type 4.921 supports semi-custom products. 14 Sleeve 40 mm M4 12 1.48 Amplifiers FX-500 series FX-100 series INDEX Seating confirmation W18xH29xD3.8 M4 Fiber Options W20xH29xD3.8 7RXJK 4 to 44 0.157 to 1.732 0 to 24 0 to 0.945 W12xH19xD3 W20xH29xD3.8 Glass substrate detection * Alignment Seating confirmation FD-L30A Heatresistant R2 W12xH19xD3 FD-L10 Chemicalresistant R2 Seating confirmation FD-L11 Retroreflective Type 1.5 to 16 0.059 to 0.630 W17xH29xD3.8 7RXJK R4 FD-L45 0 to 9.5 0 to 0.374 23 0.906 Convergent Reflective Type Alignment W17xH29xD3.8 Glass substrate detection * Seating confirmation Wide Beam R2 W24xH21xD4 FD-L22A Super Quality Narrow Beam Stainless steel mesh jacket 200 covering the stainless steel spiral tube used as a protective cover for 7.874 the fiber Changed to plastic (polyolefin) W6xH18xD14 7RXJK R4 R2 7RXJK FD-L21 Fibers Small Spot 200 7.874 7RXJK FD-L20H Viewing new models Flat Type 18 18 W6xH18xD14 R2 Coaxial * Lens mountable Stainless-jacketed FD-32GX Choose by shape/ application Sleeve 25 M3 Choose by model Cylindrical Type 25 Lens mountableFX-MR3FX-MR6 Coaxial Fiber Selection Guide Threaded Type Coaxial * Lens mountable M4 Tough Fiber Earlier models comparison table 82 Earlier Models Comparison Table New product introduction Discontinued models Type Tough Fiber Model No. Fiber Selection Guide Shape of fiber head (mm) Sleeve 40 mm Choose by model FD-NFM2S4 Bending radius (mm) R25 Sleeve R10 M4 12 Choose by shape/ application Bend- Sensing ing range dura- FX-500 bility STD (mm in) 1.48 120 4.724 Recommended replacements Model No. 7RXJK FD-41S Shape of fiber head (mm) Sleeve 40 mm M4 12 Bending radius (mm) Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) R2 Sleeve R10 1.48 Split amplifier insertion section configuration Changed to integrated 80 light emitting/receiving configuration End bracket total length 15 mm 3.150 Changed to 10 mm PVC outer covering material for fiber Changed to PE R2 End bracket shape is 12 mm for the M3 part only Changed to a total length 125 of 12 mm (M3 part/10 mm + o2 area/2 4.921 mm ) PVC outer covering material for fiber Changed to PE R4 7RXJK Viewing new models FD-P2 1.5 R4 15 80 3.150 Fibers FD-S21 1.5 R2 10 7RXJK Super Quality FD-P40 Threaded Type M3 Cylindrical Type 3 FD-P50 Sleeve R4 12 R4 15 Flat Type 45 1.772 FD-31 120 4.724 FD-S32 M3 12 7RXJK 3 15 15 R4 FD-P60 Narrow Beam M4 120 4.724 Wide Beam FD-41 7RXJK Convergent Reflective Type FD-P80 M6 R4 15 Retroreflective Type 280 11.024 M4 End bracket total length of 15 mm for 450 the M6 part only Changed to 17 mm (M6 part/15 mm + o4.5 area/2 mm) 17.717 PVC outer covering material for fiber Changed to PE R4 End bracket total length of 19 mm for the (M6 part/15 mm + crimped area/4 mm) Changed to 22 mm (o4.5 area/2 mm + M6 part/15 mm + crimped area/5 mm) 280 Split amplifier insertion section 11.024 configuration Changed to integrated light emitting/receiving configuration Stainless steel mesh jacket covering the stainless steel spiral tube used as a protective cover for the fiber Changed to plastic (polyolefin) R4 290 11.417 R4 420 16.535 R2 14 M6 R4 FD-61 Heatresistant Vacuumresistant 17 Fiber Dimensions Thru-beam Type Reflective type FD-P81X R10 R25 M6 3 FD-S80 220 8.661 FD-R60 380 14.961 R25 15 FD-SFM2SV2 52 22 7RXJK 7RXJK FD-S32 0.8 2.5 R25 R25 8 M3 FD-T40 15 M6 3 15 120 4.724 FD-V50 R25 120 4.724 FD-S31 120 4.724 FD-31 12 15 5 R4 From sleeve end to optical axis center position is 0.8 mm 120 Changed to 2.3 mm 4.724 A D-shaped surface that makes it easy to align with the optical axis has been added R2 125 4.921 End bracket shape is 8 mm for the o2.5 part only Changed to 10 mm (o3 part/ 8 mm + o2 area/2 mm) R2 125 4.921 End bracket shape is 12 mm for the M3 part only Changed to a total length of 12 mm (M3 part /10 mm + o2 area/2 mm) End bracket shape is 12 mm for the M4 part only Changed to a total length 450 of 17 mm (M6 part/15 mm + o4.5 17.717 area/2 mm) Fiber cable outside diameter o1.3 Changed to o2.2 R2 End bracket total length is 12 mm for 125 the M4 part only Changed to 14 mm (M4 part/12 mm + o2.5 area/2 mm) 4.921 Fiber cable outside diameter o1.3 Changed to o1 R2 From sleeve end to optical axis 65 center position is 0.7 mm Changed to 2 mm 2.559 End sleeve length of 10 mm Changed to 15 mm 20 2.3 2 Sleeve part cannot be bent. Sleeve part cannot be bent. Amplifiers M6 7RXJK 15 20 FD-SNFM2 FX-100 series FD-64X 15 FD-R80 Others FX-500 series 270 10.630 15 Retroreflective Type Reflective Type Stainless-jacketed Metal-jacketed M6 7RXJK M3 10 7RXJK M3 12 7RXJK M6 R4 FD-61 INDEX FD-T80 M4 R25 12 380 14.961 Earlier models comparison table 17 7RXJK FD-41 15 10 FD-V41 3 1.5 7RXJK Small diameter 0.7 Sleeve part cannot be bent. R25 65 2.559 FD-V30 M4 14 Small diameter 15 15 3 1.5 2 Sleeve part cannot be bent. End bracket total length of 15 mm for the (M4 part/12 mm + o3 area/3 mm) Changed to 14 mm (M4 part/12 mm + o2.5 area/2 mm) PVC outer covering material for fiber Changed to PE 125 4.921 Chemicalresistant Fiber Options 420 PVC outer covering material for 16.535 fiber Changed to PE 7RXJK Small Spot Liquid Leak / Liquid Detection 125 4.921 83 Earlier Models Comparison Table Type Discontinued models Model No. Bending radius (mm) Shape of fiber head (mm) Bend- Sensing ing range dura- FX-500 bility STD (mm in) Recommended replacements Model No. 7RXJK FD-41S Sleeve 40 mm FD-W44 R1 Sleeve R10 M4 1.48 12 New product introduction Shape of fiber head (mm) Sleeve 40 mm M4 80 3.150 Sleeve 40 mm FD-41SW 7RXJK M4 R1 Sleeve R10 1.48 12 M6 FD-61 M6 R1 FD-W8 15 M6 FD-WG4 M4 FD-42G R2 M4 R1 End bracket total length is 15 mm for the M6 part only Changed to 17 mm (M6 part/ 15 mm + o4.5 area/2 mm) R2 200 7.874 R1 FD-WKZ1 W5.2xH9.5xD15 20 to 490 0.787 to 19.291 FD-Z50HW Glass substrate detection R1 FD-WL41 W24xH21xD4 2.5 to 14 0.098 to 0.551 FD-L21 R1 R2 1.5 to 16 0.059 to 0.630 R1 3 to 14 0.118 to 0.551 W24xH21xD4 FD-L21W Reflective type W24xH21xD4 R1 FD-WL48 W7.2xH7.5xD2 FD-WS8 FD-WSG4 3 R1 15 7.5 0.295 250 9.843 FD-L12W 7RXJK FD-S32 FD-S32W Coaxial 3 R2 15 150 5.906 FD-S33GW 7RXJK M3 R1 FD-WT4 12 M3 FD-31W M3 FD-41 M4 R1 FD-WT8 14 250 9.843 FD-41W M4 3 2 1 R1 150 5.906 R2 125 4.921 End bracket total length is 12 mm for the M3 part only Changed to 12 mm (M3 part/ 10 mm + o2 area /2 mm) Retroreflective Type 80 3.150 End bracket total length is 12 mm for the M3 part only Changed to 12 mm (M3 part/ 10 mm + o2 area/ 2 mm) Others R1 R2 125 4.921 End bracket total length is 12 mm for the M4 part only Changed to 14 mm (M4 part/12 mm + o3 area/ 2 mm) Amplifiers R1 270 10.630 End bracket total length is 12 mm for the M4 part only Changed to 14 mm (M4 part/12 mm + o3 area/ 2 mm) FX-100 series R2 16 0.630 Sleeve part cannot be bent. FD-V30W 15 3 15 1.5 2 Sleeve part cannot be bent. Vacuumresistant R1 Sleeve part cannot be bent. 15 15 FD-WV42 2 Heatresistant 270 10.630 7RXJK FD-V30 Chemicalresistant 14 Small diameter 15 15 3 1.5 Retroreflective Type R1 14 M4 Convergent Reflective Type 420 16.535 12 7RXJK Wide Beam 12 80 3.150 Narrow Beam R4 15 FD-31 Small Spot 8 0.315 15 Coaxial 3 Cylindrical Type 15 3 Threaded Type R1 W7.2xH7.5xD2 3 150 5.906 10 to 650 Stainless steel unit casing material 0.394 to Changed to plastic (PC) 25.591 7RXJK Super Quality Sleeve W5.2xH9.5xD15 Fibers Flat Type R1 25 Long sensing range * Rectangular head Viewing new models 270 10.630 Coaxial * Lens mountable FD-42GW 80 3.150 End bracket total length is 15 mm for the M6 part only Changed to 17 mm (M6 part/ 15 mm + o4.5 area/2 mm) 25 150 5.906 25 M4 Fiber Selection Guide Choose by shape/ application 450 17.717 Coaxial * Lens mountable Tough Fiber Choose by model 17 7RXJK 125 4.921 R4 17 250 9.843 FD-61W Minute objects can be detected due to the small spot beam. Coaxial * Lens mountable FX-MR1/MR2/MR3/MR5/MR6 Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) R2 Sleeve R10 1.48 12 Bending radius (mm) R1 Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type From sleeve end to optical axis center position is 1 mm Changed to 2 mm 65 End sleeve thickness of o2 Changed to o1.5 2.559 A D-shaped surface that makes it easy to align with the optical axis has been added From sleeve end to optical axis center position is 1 mm Changed to 2 mm 20 End sleeve thickness of o2 Changed to o1.5 0.787 A D-shaped surface that makes it easy to align with the optical axis has been added Reflective Type FX-500 series INDEX Earlier models comparison table 84 Earlier Models Comparison Table New product introduction Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Type Discontinued models Model No. Shape of fiber head (mm) Bending radius (mm) Bend- Sensing ing range dura- FX-500 bility STD (mm in) R1 2.5 to 65 0.098 to 2.559 Fiber bending type Reflective type Tough Fiber FD-WZ4HB W2xH10xD10 Fiber bending type R1 FD-WZ7HB W3.5xH14xD11 1 to 150 0.039 to 5.906 W7.5xH2.2xD11.2 Fibers Cylindrical Type Sleeve Flat Type Retroreflective type Threaded Type FR-KZ21 R10 20 to 200 0.787 to 7.874 R1 100 to 990 3.937 to 38.976 W10.6xH28xD10.1 W9.5xH25xD5.2 FR-KZ21E FR-WKZ11 W30xH30xD0.5 Wide area sensing FT-A30 Chemicalresistant Heatresistant FT-A8 Vacuumresistant Liquid Leak / Liquid Detection R10 W5xH69xD20 Wide area sensing Sensing width 11 mm Top sensing W5xH15xD15 FT-B8 Fiber Dimensions 3600 141.732 R10 3600 141.732 R25 Side sensing W5xH15xD15 R25 FT-AFM2E M4 FD-Z40HBW Thru-beam type FT-E12 Beam dia. 0.125 mm 0.25 3 Sleeve part cannot be bent. 260 10.236 FR-KZ22E R2 15 to 310 Unit side installation screw 0.591 to positions have been moved back 1 12.205 mm from the front edge 7RXJK R2 20 to 300 0.787 to 11.811 R2 20 to 300 0.787 to 11.811 R1 100 to 990 3.937 to 38.976 R2 Fiber cable outside diameter o2.2 3600 Changed to o1.3 141.732 Optical cable diameter of 3 x 32 Changed to 3.2 x 32 R2 3600 Fiber cable outside diameter o2.2 141.732 Changed to o1.3 860 33.858 R2 860 Cable lead out orientation changed Metal casing material (brass) 33.858 Changed to plastic (PPS) 860 33.858 R2 860 Cable lead out direction changed Metal casing material (brass) 33.858 Changed to plastic (PPS) R4 W9.5xH5.2xD21 FR-KZ50H W10.6xH28xD10.1 7RXJK W9.5xH25xD5.2 FR-KZ50E W28xH10.6xD10.1 W5.2xH9.5xD16 FR-Z50HW W30xH30xD0.5 FT-A32 FT-A11 7RXJK FT-AL05 7RXJK FT-AL05 Sensing width 32 mm W5xH69xD20 Sensing width 11 mm W4.2xH31xD13.5 Sensing width 5.5 mm W5xH15xD15 Sensing width 5.5 mm W5xH15xD15 R25 1250 49.213 M4 FT-43 15 7RXJK R5 0.253 FT-E13 5 15 Beam dia. 0.25 mm FT-E22 7RXJK 0.43 R2 Set length type Changed to free cut type 75 Fiber cable outside diameter o1.2 Changed to o1 2.953 End bracket length of 10 mm Changed to 15 mm R2 (Protective tube R20) Liquid detection R4 19600 771.654 R4 1130 44.488 R2 5 10 R5 FT-F902 FX-100 series Mountable on pipe SEMI S2 compliant W23xH20xD17 With lens M14 FT-FM10L Beam dia. 0.25 mm 0.43 FT-E23 5 15 Sleeve part cannot be bent. 7RXJK R4 (Protective tube R20) Liquid detection R25 19600 771.654 FT-F93 7RXJK SEMI S2 compliant W23xH20xD17 With long range lens 40 23 INDEX FT-FM2 Lens mountable FX-LE1/LE2/SV1 M4 15 Sleeve 90 mm M4 FT-FM2S 1.48 12 Sleeve 40 mm FT-FM2S4 M4 1.48 12 R25 1100 43.307 M14 FT-140 7RXJK Lens mountable M4 FT-42 15 7RXJK R25 1100 Sleeve 43.307 R10 FT-42S R25 1100 Sleeve 43.307 R10 FT-42S 7RXJK Sleeve 40 1400 55.118 Fiber length 500 mm /set length type Changed to fiber length 1 m/free cut type 15 Fiber cable outside diameter o1.2 0.591 Changed to o1 End bracket length of 10 mm Changed to 15 mm Beam dia. 0.125 mm Sleeve part cannot be bent. Amplifiers Earlier models comparison table R1 W3.5xH14xD11 Sleeve part cannot be bent. FX-500 series 2 to 85 0.079 to 3.346 W7.5xH2.2xD11.2 15 Thru-beam Type R1 W2xH10xD10 Lens mountable Lens mountable FX-LE1/LE2/SV1 Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) Fiber bending type 7RXJK W4.2xH31xD13.5 FT-AFM2 Fiber Options FD-Z20HBW 7RXJK Sensing width 32 mm Bending radius (mm) W4xH2xD21.5 W10.6xH28xD10.1 Retroreflective Type Others R10 20 to 200 0.787 to 7.874 W9.5xH5.2xD15 Convergent Reflective Type Reflective Type Shape of fiber head (mm) Fiber bending type W4xH2xD21.5 Wide Beam Retroreflective Type 20 to 310 0.787 to 12.205 R10 W9.5xH5.2xD21 Small Spot Narrow Beam Model No. 7RXJK FR-KV1 Super Quality Recommended replacements R4 1130 The sleeve length 90 mm type Sleeve 44.488 supports semi-custom products. R10 12 M4 1.48 Sleeve 40 M4 1.48 R4 1130 Sleeve 44.488 12 R10 85 Earlier Models Comparison Table Type Discontinued models Shape of fiber head (mm) Model No. 3.5 3.7 FT-K8 Bending radius (mm) Bend- Sensing ing range dura- FX-500 bility STD (mm in) R25 3600 141.732 20 W2xH1.5xD20 R10 2 FT-KV1 20 3 Model No. Shape of fiber head (mm) 7RXJK FT-KS40 3.5 3.7 R25 3600 141.732 M3 R25 15 Sleeve 90 mm M3 FT-NFM2S 0.88 10 Sleeve 40 mm M3 FT-NFM2S4 0.88 10 7RXJK FT-KV26 FT-KV40 2 330 12.992 FT-S21 M3 FT-P40 R4 Lens mountableFX-LE1/LE2/SV1 M4 R4 160 6.299 350 13.780 3 M4 M3 7RXJK Sleeve 40 M3 0.88 M4 FT-P81X M3 0.88 7RXJK FT-PS1 R4 R10 R4 Lens mountableFX-LE1/LE2 14 R25 M4 2.5 FT-SFM2 1.52.5 0.8 Sleeve part cannot be bent. R25 1.5 FT-T80 20 15 FT-SNFM2 8 M3 7RXJK M4 FT-42 M3 R25 R25 12.5 810 31.890 880 34.646 90 3.543 Lens mountable M4 FT-42 R25 3 25 R2 End bracket total length of 10 mm for 315 the M3 part Changed to 12 mm (M3 part/10 mm + o2 area/2 mm) 12.402 Fiber exterior cover material of PVC Changed to PE R4 Fiber exterior cover material of 1130 PVC Changed to PE 44.488 Fiber cable outside diameter o1.25 Changed to o2.2 R4 1130 Fiber exterior cover material of 44.488 PVC Changed to PE Stainless steel mesh jacket covering 1200 the stainless steel spiral tube used as 47.244 a protective cover for the fiber Changed to plastic (polyolefin) 15 M4 FT-45X R4 20 7RXJK FT-S11 7RXJK 780 30.709 FT-R40 1100 43.307 FT-S32 2600 102.362 FT-S32 570 22.441 FT-V30 310 12.205 1 R2 90 3.543 R4 930 36.614 R10 3100 Optical cable diameter of o1 122.047 Changed to o2.2 R10 3100 122.047 R4 From sleeve end to optical axis center 680 position is 0.8 Changed to 1.3 mm 26.772 D-shaped surface that makes it easy to align with the optical axis has been added R2 315 End bracket total length of o1.5 /8 mm Changed to 12 mm (o1 12.402 area/2 mm + o1.5/8 mm) R4 End bracket total length of 12.5 mm for the (M2.6 part/2.5 mm + M3 part/10 1130 mm) Changed to 15 mm (M2.6 part 44.488 /3 mm + M4 part/12 mm) Fiber cable outside diameter o1.3 Changed to o2.2 R4 6 Lens mountable 15 M4 2.5 8 2.5 8 1.52.5 7RXJK 1.3 Sleeve part cannot be bent. 20 15 7RXJK 1.5 FT-S21 1100 43.307 FT-42 3500 137.795 FT-V40 4 FT-V10 Fiber length 1 m/Set length type 315 Changed to fiber length 2 m/free cut type 12.402 Fiber exterior cover material of PVC Changed to PE 15 7RXJK 10 Lens mountable M4 15 4 7RXJK 3 25 3500 137.795 Choose by model Viewing new models Fibers Super Quality Threaded Type Cylindrical Type Sleeve Flat Type Narrow Beam Lens mountable Fiber Selection Guide Small Spot R2 12 7RXJK Lens mountable FX-LE1/SV1 315 12.402 Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type End bracket total length of 14 mm for the (M2.6 part/3 mm + M4 part/11 mm) Changed to 15 mm (M2.6 part/3 mm + M4 part/12 mm) Long sensing range * with lens R25 8 FT-SFM2SV2 R2 Sleeve R10 10 FT-31 Long sensing range * with lens 2.5 315 The sleeve length 90 mm type 12.402 supports semi-custom products. Long sensing range * with lens R25 8 FT-SFM2L R2 Sleeve R10 Lens mountable * Stainless-jacketed 6 FT-R80 10 1.5 20 1 10 Sleeve 40 15 Lens mountableFX-LE1/LE2/SV1 Metal-jacketed R2 End bracket total length of 15 mm for 315 the (M3 part/10 mm + o2 area/5 mm 12.402 Changed to 12 mm (M3 part/10 mm + o2 area/2 mm) 25 15 Lens mountableFX-LE1/LE2/SV1 FT-P80 R2 Fiber cable outside diameter o2.2 Changed to o1 3600 Metal end material (stainless steel) 141.732 Changed to plastic (LCP), set screw fastening specifications Changed to MS-FD-3 fastener specifications 7RXJK 10 FT-P60 7RXJK FT-31S 10 4 Tough Fiber Choose by shape/ application 710 27.953 R2 12 R25 310 Sleeve 12.205 R10 R2 3600 Fiber cable outside diameter o2.2 141.732 Changed to o1 20 FT-31 FT-31S R4 Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) 1.5x2 7RXJK R25 310 Sleeve 12.205 R10 1.5 FT-P2 310 12.205 Bending radius (mm) 20 25 FT-NFM2 Thru-beam type Recommended replacements 7RXJK Side-view type with small light dispersion 4 FT-KV8 540 21.260 New product introduction Retroreflective Type Reflective Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 86 Earlier Models Comparison Table New product introduction Discontinued models Type Tough Fiber Model No. Shape of fiber head (mm) Fiber Selection Guide Bending radius (mm) Bend- Sensing ing range dura- FX-500 bility STD (mm in) Recommended replacements Model No. Shape of fiber head (mm) 1 2 FT-V22 Choose by shape/ application 0.6 Sleeve part cannot be bent. R25 20 15 300 11.811 FT-V41 Fibers 0.6 Sleeve part cannot be bent. 1.1 R25 10 15 200 7.874 Super Quality FT-V25 1 Sleeve part cannot be bent. M3 FT-W4 R1 15 M3 M3 FT-31W 1130 44.488 R1 800 31.496 R2 Fiber cable outside diameter o2.2 3600 Changed to o1.3 141.732 Optical cable diameter of 3 x 32 Changed to 3.2 x 32 R1 Fiber cable outside diameter o2.2 3600 Changed to o1.3 141.732 Optical cable diameter of 3 x 32 Changed to 3.2 x 32 R2 3600 Fiber cable outside diameter o2.2 141.732 Changed to o1.3 R1 3600 Fiber cable outside diameter o2.2 141.732 Changed to o1.3 R2 Fiber cable outside diameter o2.2 Changed to o1 3600 Metal end material (stainless steel) Changed to plastic (LCP), set screw 141.732 fastening specifications Changed to MS-FD-3 fastener specifications R1 Fiber cable outside diameter o2.2 Changed to o1 3600 Metal end material (stainless steel) Changed to plastic (LCP), set screw 141.732 fastening specifications Changed to MS-FD-3 fastener specifications R1 800 31.496 R1 2200 86.614 R1 800 End bracket total length of 15 mm 31.496 Changed to 10 mm 12 Small Spot Narrow Beam 7RXJK Wide Beam M4 FT-W8 R10 M4 15 Retroreflective Type 15 790 31.102 Lens mountable M4 FT-42W 15 Chemicalresistant 7RXJK Heatresistant Sensing width 32 mm Thru-beam type FT-A32 FT-WA30 Sensing width 32 mm R1 W5xH69xD20 W5xH69xD20 3600 141.732 Sensing width 32 mm FT-A32W W5xH69xD20 7RXJK Sensing width 11 mm FT-A11 Fiber Dimensions FT-WA8 Sensing width 11 mm W4.2xH31xD13.5 R1 W4.2xH31xD13.5 3600 141.732 Retroreflective Type Sensing width 11 mm FT-A11W Reflective Type Others W4.2xH31xD13.5 7RXJK FT-KV40 FT-WKV8 FX-500 series 4 3 R1 W7xH9xD13.9 With lens M4 R1 3 15 660 25.984 FT-R41W 2200 86.614 FT-R42W 790 31.102 FT-S31W 3 25 M4 W7xH9xD13.9 With long range lens R1 W7xH9xD14.6 FT-WS3 25 4 M4 FT-WR80L 3 25 FT-KV40W FT-WR80 4 3600 141.732 FX-100 series End bracket total length of 15 mm for the (M3 part/10 mm + crimped area/5 mm) Changed to 12 mm (o2 area/2 mm + M3 part/10 mm) Fiber cable outside diameter o2.2 Changed to o1 Lens mountable FT-42 Lens mountable FX-LE1/LE2/SV1 Convergent Reflective Type Earlier models comparison table R4 250 9.843 Flat Type INDEX R1 260 10.236 15 15 12 Sleeve Amplifiers R2 End bracket total length of 15 mm for the (M3 part/10 mm + crimped 315 area/5 mm) Changed to 12 mm 12.402 (o2 area/2 mm + M3 part/10 mm) Fiber cable outside diameter o2.2 Changed to o1 1 2 FT-31 Cylindrical Type Thru-beam Type 20 15 7RXJK Threaded Type Fiber Options R2 End bracket outside diameter of 240 o2.5 Changed to o2 From sleeve end to optical axis 9.449 center position is 0.6 Changed to 1 mm R4 Sleeve part cannot be bent. 7RXJK 1 2.5 Fiber length 1 m/Set length type Changed to fiber length 2 m/free cut type 450 From sleeve end to optical axis center 17.717 position is 0.6 Changed to 1.1 mm D-shaped surface that makes it easy to align with the optical axis has been added 1 2 FT-V23 Viewing new models Liquid Leak / Liquid Detection Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) 7RXJK Choose by model Vacuumresistant Bending radius (mm) R1 M4 W7xH9xD14.4 3 10 87 Earlier Models Comparison Table Type Discontinued models Model No. Shape of fiber head (mm) Bending radius (mm) Bend- Sensing ing range dura- FX-500 bility STD (mm in) New product introduction Recommended replacements Model No. Shape of fiber head (mm) 7RXJK 1.5 FT-S21 1.5 FT-WS4 R1 8 2.5 FT-WS8 8 790 31.102 3 1.5 3 R1 3300 129.921 2.5 FT-S32 FT-V25 1 2 15 15 Sleeve part cannot be bent. R1 100 3.937 FT-V24W W2xH10xD10 R1 210 8.268 Thru-beam type FT-WZ7HB 790 31.102 R1 Sleeve part cannot be bent. 1 Sleeve part cannot be bent. R1 1300 51.181 W3.5xH14xD11 Top sensing Top sensing W8.5xH12xD3 Side sensing R1 3400 133.858 Side sensing 7RXJK Top sensing R1 3300 129.921 Top sensing Side sensing FT-Z8E W3xH12xD8 R4 FT-Z8H 1200 47.244 2000 78.740 R4 R4 2100 82.677 Top sensing W3xH8xD12 260 10.236 R1 800 31.496 R2 2100 Black casing color Changed to translucent, protective seal 82.677 eliminated Top sensing 7RXJK Top sensing Side sensing FT-Z30H Top sensing 1500 Black casing color Changed to translucent, protective seal 59.055 eliminated R2 3500 137.795 R1 3400 133.858 R2 3500 137.795 R1 3500 137.795 R2 2100 Black casing color Changed to translucent, protective seal 82.677 eliminated W8.5xH12xD3 W3xH12xD8 FT-Z30E 7RXJK W3xH8xD12 FT-Z30 7RXJK R1 W3xH8xD12 FT-Z30HW FT-Z8 W3xH12xD8 FT-Z30H Top sensing W8.5xH12xD3 110 D-shaped surface that makes it easy to align with the optical axis 4.331 has been added R1 W3xH12xD8 FT-Z30EW FT-WZ8H 240 D-shaped surface that makes it easy to align with the optical axis 9.449 has been added W8.5xH12xD3 FT-Z30E Side sensing W3xH8xD12 End bracket shape of o3 3100 Changed to o2.5 122.047 Bending radius of 1 mm Changed to 10 mm R1 15 15 W2xH10xD10 FT-Z40HBW 7RXJK FT-WZ8E 15 15 1 2 FT-Z30W W3xH12xD8 R2 1 2 1 FT-Z30 Top sensing FT-WZ8 800 End bracket shape of o2.5/8 mm Changed to 10 mm (o2 part/2 31.496 mm + o3 part/8 mm) Fiber bending type 7RXJK W8.5xH12xD3 R10 8 FT-Z20HBW Fiber bending type W3.5xH14xD11 Fiber bending type Fiber bending type FT-WZ4HB R1 10 7RXJK 1 R1 260 End bracket shape of o1.5/8 mm Changed to 10 mm (o1 part/2 10.236 mm + o1.5 part/8 mm) Long sensing range * with lens 8 FT-WV42 R2 315 End bracket shape of o1.5/8 mm Changed to 10 mm (o1 part/2 12.402 mm + o1.5 part/8 mm) 10 FT-S31W Long sensing range * with lens FT-WS8L Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) 10 250 9.843 FT-S21W R1 Bending radius (mm) Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type Retroreflective Type Reflective Type Others Amplifiers FX-500 series R2 3500 137.795 FX-100 series R2 3500 137.795 INDEX W3xH8xD12 Earlier models comparison table 88 GENERAL TERMS AND CONDITIONS Please read this document carefully with respect to our product warranty policy before using our Panasonic Electric Works SUNX products ("Products"). If you have any questions or comments regarding do's and don'ts of the Products, please consult your local Panasonic Electric Works SUNX authorized dealer for the correct use and application of the Products. 1. PRODUCT MODIFICATION & DISCONTINUANCE: Panasonic Electric Works SUNX expressly reserves the right to modify, including the right to discontinue, any of the Products, prior to their order, from time to time without notice. 2. WARRANTIES: (1) Subject to the exclusions stated in 3 (EXCLUSIONS) herein below, Panasonic Electric Works SUNX warrants the Products to be free of defects in material and workmanship for a period of one (1) year from the date of shipment under normal usage in environments commonly found in manufacturing industry. (2) Any Products found to be defective must be shipped to Panasonic Electric Works SUNX with all shipping costs paid by Purchaser or offered to Panasonic Electric Works SUNX for inspection and examination. Upon examination by Panasonic Electric Works SUNX, Panasonic Electric Works SUNX will, at its sole discretion, repair or replace at no charge, or refund the purchase price of, any Products found to be defective. 3. EXCLUSIONS (1) This warranty does not apply to defects resulting from any cause: (i) which was due to abuse, misuse, mishandling, improper installation, improper interfacing, or improper repair by Purchaser; (ii) which was due to unauthorized modification by Purchaser, in part or in whole, whether in structure, performance or specification; (iii) which was not discoverable by a person with the state-of-the-art scientific and technical knowledge at the time of manufacture; (iv) which was due to an operation or use by Purchaser outside of the limits of operation or environment specified by Panasonic Electric Works SUNX; (v) which was due to Force Majeure; and (vi) which was due to any use or application expressly discouraged by Panasonic Electric Works SUNX in 5 (CAUTIONS FOR SAFE USE) hereunder. (2) This warranty extends only to the first purchaser for application, and is not transferable to any person or entity which purchased from such purchaser for application. (3) The performance data presented in this catalogue is only for guidance and shall not constitute any performance warranty by Panasonic Electric Works SUNX. 4. DISCLAIMERS (1) Panasonic Electric Works SUNX's sole obligation and liability under this warranty is limited to the repair or replacement, or refund of the purchase price, of a defective Product, at Panasonic Electric Works SUNX's option. (2) THE REPAIR, REPLACEMENT, OR REFUND IS THE EXCLUSIVE REMEDY OF THE PURCHASER, AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF PROPRIETARY RIGHTS, ARE HEREBY EXPRESSLY DISCLAIMED. IN NO EVENT SHALL PANASONIC ELECTRIC WORKS SUNX AND ITS AFFILIATED ENTITIES BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCTS, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMANGES RESULTING FROM LOSS OF USE, BUSINESS INTERRUPTION, LOSS OF INFORMATION, LOSS OR INACCURACY OF DATA, LOSS OF PROFITS, LOSS OF SAVINGS, THE COST OF PROCUREMENT OF SUBSTITUTED GOODS, SERVICES OR TECHNOLOGIES, OR FOR ANY MATTER ARISING OUT OF OR IN CONNECTION WITH THE USE OR INABILITY TO USE THE PRODUCTS. 5. CAUTIONS FOR SAFE USE (1) The applications shown in this catalogue are only suggestions, and it is Purchaser's sole responsibility to ascertain the fitness and suitability of the Products for any particular application, as well as to abide by Purchaser's applicable local laws and regulations, if any. (2) Never use the Products NOT rated or designated as "SAFETY SENSOR" in any application involving risk to life or property. When such a use is made by Purchaser, such Purchaser shall indemnify and hold harmless Panasonic Electric Works SUNX from any liability or damage whatsoever arising out of or in relation to such use. (3) In incorporating the Products to any equipment, facilities or systems, it is highly recommended to employ fail-safe designs, including but not limited to a redundant design, flame propagation prevention design, and malfunction prevention design so as not to cause any risk of bodily injury, fire accident, or social damage due to any failure of such equipment, facilities or systems. (4) The Products are each intended for use only in environments commonly found in manufacturing industry, and, unless expressly allowed in this catalogue, specification or otherwise, shall not be used in, or incorporated into, any equipment, facilities or systems, such as those: (a) which are used for the protection of human life or body parts; (b) which are used outdoors or in environments subject to any likelihood of chemical contamination or electromagnetic influence; (c) which are likely to be used beyond the limits of operations or environments specified by Panasonic Electric Works SUNX in this catalogue or otherwise; (d) which may cause risk to life or property, such as nuclear energy control equipment, transportation equipment (whether on rail or land, or in air or at sea), and medical equipment; (e) which are operated continuously each day for 24 hours; and (f) which otherwise require a high level of safety performance similar to that required in those equipment, facilities or systems as listed in (a) through (e) above. 6. EXPORT CONTROL LAWS In some jurisdictions, the Products may be subject to local export laws and regulations. If any diversion or re-export is to be made, Purchaser is advised to abide by such local export laws and regulations, if any, at its own responsibility. 7. PURCHASER'S TRASFER OBLIGATIONS If Purchaser resell or deliver the Products to a third party, Purchaser must provide such third party with a copy of this document, all specifications, manuals, catalogs, leaflets and written information of any kind provided to Purchaser by Panasonic Electric Works SUNX or its authorized local representative from time to time regarding the Products. New Product Communication Unit for Open Network Fiber Sensor Guide Book The digital sensor can be connected directly to the 3 types of open network! Other types of analog input sensors can also be connected! Fiber Sensor Guide Book On sale soon Scattered digital sensors can be centrally managed and set through an open network. Applicable Digital Sensor Please contact .......... Digital Fiber Sensor Digital Laser Sensor Digital Pressure Sensor Panasonic Electric Works SUNX Co., Ltd. 2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan Telephone: +81-568-33-7211 Facsimile: +81-568-33-2631 Global Sales & Marketing Division Telephone: +81-568-33-7861 Facsimile: +81-568-33-8591 panasonic-electric-works.net/sunx All Rights Reserved No. CE-FIBERGUIDE-7 October, 2011 Specifications are subject to change without notice. Panasonic Electric Works SUNX Co., Ltd. 2011 Printed in Japan 2011.10 panasonic-electric-works.net/sunx