When you need thermal conductance and
electrical isolation in one package, In-Sil-8
Pads offer you the best of both. These
silicone-based insulators come with
thermally conductive fillers to isolate up to
6000 volts AC. In-Sil-8 pads withstand the
rigors of assembly, harsh environments,
and aging under continuous use. You'll save
time with these cost-effective pads too:
installation is 4 times faster than mica and
grease, and they won't contaminate solder
baths. Order In-Sil-8 Pads with or without
pressure-sensitive adhesive, and in
standard or custom shapes.
Ordering Information
In-Sil-8 pads have 12 digit ordering numbers. The 1st - 4th digits are
listed in this chart, the 5th & 6th digits indicate standard configurations,
and the last 6 digits are F00000. The 5th and 6th digit ordering codes
along with the part dimensions are listed in the code column on the
standard pads page.
Part Numbers
(With adhesive factory
applied to one side)
1886
(1896) 1887
(1897) 1888
(1898) 1889
(1899)
Color Grey Rust Grey Grey
Thickness (inch) 0.006 0.009 0.007 0.009
Thickness (mm) 0.15 0.23 0.18 0.23
Thermal Res. (°C/W)
TO-3
TO-220
TO-218
0.40
1.40
0.93
0.21
0.63
0.49
0.33
1.25
0.77
0.50
1.50
1.16
Breakdown Voltage 6000 5000 4000 5000
Dielectric Constant 5.5 4.5 5.5 5.5