Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. LM78XX / LM78XXA 3-Terminal 1 A Positive Voltage Regulator Features Description * * * * * The LM78XX series of three-terminal positive regulators is available in the TO-220 package and with several fixed output voltages, making them useful in a wide range of applications. Each type employs internal current limiting, thermal shut-down, and safe operating area protection. If adequate heat sinking is provided, they can deliver over 1 A output current. Although designed primarily as fixedvoltage regulators, these devices can be used with external components for adjustable voltages and currents. Output Current up to 1 A Output Voltages: 5, 6, 8, 9, 10, 12, 15, 18, 24 V Thermal Overload Protection Short-Circuit Protection Output Transistor Safe Operating Area Protection TO-220 (Single Gauge) GND 1 1. Input 2. GND 3. Output Ordering Information(1) Product Number Output Voltage Tolerance Package Operating Temperature Packing Method LM7805CT LM7806CT LM7808CT LM7809CT LM7810CT -40C to +125C 4% LM7812CT LM7815CT TO-220 (Single Gauge) LM7818CT Rail LM7824CT LM7805ACT LM7809ACT LM7810ACT 2% 0C to +125C LM7812ACT LM7815ACT Note: 1. Above output voltage tolerance is available at 25C. (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator September 2014 Input Series Pass Element 1 Current Generator Starting Circuit Reference Voltage Output 3 SOA Protection Error Amplifier Thermal Protection GND 2 Figure 1. Block Diagram Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25C unless otherwise noted. Symbol VI Parameter Input Voltage Value VO = 5 V to 18 V 35 VO = 24 V 40 RJC Thermal Resistance, Junction-Case (TO-220) RJA Thermal Resistance, Junction-Air (TO-220) TOPR Operating Temperature Range TSTG Storage Temperature Range (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 LM78xx LM78xxA Unit V 5 C/W 65 C/W -40 to +125 0 to +125 - 65 to +150 C C www.fairchildsemi.com 2 LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Block Diagram Refer to the test circuit, -40C < TJ < 125C, IO = 500 mA, VI = 10 V, CI = 0.1 F, unless otherwise specified. Symbol Parameter Conditions Min. Typ. Max. TJ = +25C 4.80 5.00 5.20 Output Voltage IO = 5 mA to 1 A, PO 15 W, VI = 7 V to 20 V 4.75 5.00 5.25 Regline Line Regulation(2) TJ = +25C Regload Load Regulation(2) TJ = +25C IQ Quiescent Current TJ = +25C IQ Quiescent Current Change VO/T VN VO Unit V VI = 7 V to 25 V 4.0 100.0 VI = 8 V to 12 V 1.6 50.0 IO = 5 mA to 1.5 A 9.0 100.0 IO = 250 mA to 750 mA 4.0 50.0 5 8 IO = 5 mA to 1 A 0.03 0.50 VI = 7 V to 25 V 0.30 1.30 Output Voltage Drift(3) IO = 5 mA -0.8 mV/C Output Noise Voltage f = 10 Hz to 100 kHz, TA = +25C 42 V RR Ripple Rejection VDROP Dropout Voltage (3) (3) f = 120 Hz, VI = 8 V to 18 V 62 mV mV mA mA 73 dB TJ = +25C, IO = 1 A 2 V f = 1 kHz 15 m RO Output Resistance ISC Short-Circuit Current TJ = +25C, VI = 35 V 230 mA IPK Peak Current(3) TJ = +25C 2.2 A Notes: 2. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 3. These parameters, although guaranteed, are not 100% tested in production. (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com 3 LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Electrical Characteristics (LM7805) Refer to the test circuit, -40C < TJ < 125C, IO = 500 mA, VI = 11 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified. Symbol Parameter Conditions Min. Typ. Max. TJ = +25C 5.75 6.00 6.25 Output Voltage IO = 5 mA to 1 A, PO 15 W, VI = 8.0 V to 21 V 5.70 6.00 6.30 Regline Line Regulation(4) TJ = +25C VI = 8 V to 25 V 5.0 120.0 VI = 9 V to 13 V 1.5 60.0 Regload Load Regulation(4) TJ = +25C IO = 5 mA to 1.5 A 9.0 120.0 IO = 250 mA to 750 mA 3.0 60.0 IQ Quiescent Current TJ = +25C Quiescent Current Change IO = 5 mA to 1 A 0.5 VI = 8 V to 25 V 1.3 VO/T Output Voltage Drift(5) IO = 5 mA VN Output Noise Voltage f = 10 Hz to 100 kHz, TA = +25C VO IQ RR Ripple Rejection(5) 5 f = 120 Hz, VI = 8 V to 18 V 62 8 Unit V mV mV mA mA -0.8 mV/C 45 V 73 dB Dropout Voltage TJ = +25C, IO = 1 A 2 V RO Output Resistance(5) f = 1 kHz 19 m ISC Short-Circuit Current TJ = +25C, VI = 35 V 250 mA TJ = +25C 2.2 A VDROP IPK Peak Current (5) Notes: 4. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 5. These parameters, although guaranteed, are not 100% tested in production. (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com 4 LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Electrical Characteristics (LM7806) Refer to the test circuit, -40C < TJ < 125C, IO = 500 mA, VI = 14 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified. Symbol Parameter Conditions Min. Typ. Max. Unit TJ = +25C 7.7 8.0 8.3 Output Voltage IO = 5 mA to 1 A, PO 15 W, VI = 10.5 V to 23 V 7.6 8.0 8.4 Regline Line Regulation(6) TJ = +25C VI = 10.5 V to 25 V 5 160 VI = 11.5 V to 17 V 2 80 Regload Load Regulation(6) TJ = +25C IO = 5 mA to 1.5 A 10 160 IO = 250 mA to 750 mA 5 80 IQ Quiescent Current TJ = +25C 5 8 Quiescent Current Change IO = 5 mA to 1 A 0.05 0.50 VI = 10.5 V to 25 V 0.5 1.0 VO/T Output Voltage Drift(7) IO = 5 mA -0.8 mV/C VN Output Noise Voltage f = 10 Hz to 100 kHz, TA = +25C 52 V 73 dB VO IQ RR Ripple Rejection(7) f = 120 Hz, VI = 11.5 V to 21.5 V 56 V mV mV mA mA Dropout Voltage IO = 1 A, TJ = +25C 2 V RO Output Resistance(7) f = 1 kHz 17 m ISC Short-Circuit Current VI = 35 V, TJ = +25C 230 mA TJ = +25C 2.2 A VDROP IPK Peak Current (7) Notes: 6. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 7. These parameters, although guaranteed, are not 100% tested in production. (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com 5 LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Electrical Characteristics (LM7808) Refer to the test circuit, -40C < TJ < 125C, IO = 500 mA, VI = 15 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified. Symbol Parameter Conditions Min. Typ. Max. Unit TJ = +25C 8.65 9.00 9.35 Output Voltage IO = 5 mA to 1 A, PO 15 W, VI = 11.5 V to 24 V 8.60 9.00 9.40 Regline Line Regulation(8) TJ = +25C VI = 11.5 V to 25 V 6 180 VI = 12 V to 17 V 2 90 Regload Load Regulation(8) TJ = +25C IO = 5 mA to 1.5 A 12 180 IO = 250 mA to 750 mA 4 90 IQ Quiescent Current TJ = +25C Quiescent Current Change IO = 5 mA to 1 A 0.5 VI = 11.5 V to 26 V 1.3 VO/T Output Voltage Drift(9) IO = 5 mA -1 mV/C VN Output Noise Voltage f = 10 Hz to 100 kHz, TA = +25C 58 V 71 dB VO IQ RR Ripple Rejection(9) 5 f = 120 Hz, VI = 13 V to 23 V 56 8 V mV mV mA mA Dropout Voltage IO = 1 A, TJ = +25C 2 V RO Output Resistance(9) f = 1 kHz 17 m ISC Short-Circuit Current VI = 35 V, TJ = +25C 250 mA TJ = +25C 2.2 A VDROP IPK Peak Current (9) Notes: 8. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 9. These parameters, although guaranteed, are not 100% tested in production. (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com 6 LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Electrical Characteristics (LM7809) Refer to the test circuit, -40C < TJ < 125C, IO = 500 mA, VI = 16 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified. Symbol Parameter Conditions Min. Typ. Max. Unit TJ = +25C 9.6 10.0 10.4 Output Voltage IO = 5 mA to 1 A, PO 15 W, VI = 12.5 V to 25 V 9.5 10.0 10.5 Regline Line Regulation(10) TJ = +25C VI = 12.5 V to 25 V 10 200 VI = 13 V to 25 V 3 100 Regload Load Regulation(10) TJ = +25C IO = 5 mA to 1.5 A 12 200 IO = 250 mA to 750 mA 4 400 IQ Quiescent Current TJ = +25C 5.1 8.0 Quiescent Current Change IO = 5 mA to 1 A 0.5 VI = 12.5 V to 29 V 1.0 Output Voltage Drift(11) IO = 5 mA -1 mV/C Output Noise Voltage f = 10 Hz to 100 kHz, TA = +25C 58 V 71 dB VO IQ VO/T VN RR Ripple Rejection(11) f = 120 Hz, VI = 13 V to 23 V 56 V mV mV mA mA Dropout Voltage IO = 1 A, TJ = +25C 2 V RO Output Resistance(11) f = 1 kHz 17 m ISC Short-Circuit Current VI = 35 V, TJ = +25C 250 mA TJ = +25C 2.2 A VDROP IPK Peak Current (11) Notes: 10. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 11. These parameters, although guaranteed, are not 100% tested in production. (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com 7 LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Electrical Characteristics (LM7810) Refer to the test circuit, -40C < TJ < 125C, IO = 500 mA, VI = 19 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified. Symbol Parameter Conditions Min. Typ. Max. Unit TJ = +25C 11.5 12.0 12.5 Output Voltage IO = 5 mA to 1 A, PO 15 W, VI = 14.5 V to 27 V 11.4 12.0 12.6 Regline Line Regulation(12) TJ = +25C VI = 14.5 V to 30 V 10 240 VI = 16 V to 22 V 3 120 Regload Load Regulation(12) TJ = +25C IO = 5 mA to 1.5 A 11 240 IO = 250 mA to 750 mA 5 120 IQ Quiescent Current TJ = +25C 5.1 8.0 Quiescent Current Change IO = 5 mA to 1 A 0.1 0.5 VI = 14.5 V to 30 V 0.5 1.0 Output Voltage Drift(13) IO = 5 mA -1 mV/C Output Noise Voltage f = 10 Hz to 100 kHz, TA = +25C 76 V 71 dB VO IQ VO/T VN RR Ripple Rejection(13) f = 120 Hz, VI = 15 V to 25 V 55 V mV mV mA mA Dropout Voltage IO = 1 A, TJ = +25C 2 V RO Output Resistance(13) f = 1 kHz 18 m ISC Short-Circuit Current VI = 35 V, TJ = +25C 230 mA TJ = +25C 2.2 A VDROP IPK Peak Current (13) Notes: 12. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 13. These parameters, although guaranteed, are not 100% tested in production. (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com 8 LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Electrical Characteristics (LM7812) Refer to the test circuit, -40C < TJ < 125C, IO = 500 mA, VI = 23 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified. Symbol Parameter Conditions Min. Typ. Max. Unit TJ = +25C 14.40 15.00 15.60 Output Voltage IO = 5 mA to 1 A, PO 15 W, VI = 17.5 V to 30 V 14.25 15.00 15.75 Regline Line Regulation(14) TJ = +25C VI = 17.5 V to 30 V 11 300 VI = 20 V to 26 V 3 150 Regload Load Regulation(14) TJ = +25C IO = 5 mA to 1.5 A 12 300 IO = 250 mA to 750 mA 4 150 IQ Quiescent Current TJ = +25C 5.2 8.0 Quiescent Current Change IO = 5 mA to 1 A 0.5 VI = 17.5 V to 30 V 1.0 Output Voltage Drift(15) IO = 5 mA -1 mV/C Output Noise Voltage f = 10 Hz to 100 kHz, TA = +25C 90 V 70 dB VO IQ VO/T VN RR Ripple Rejection(15) f = 120 Hz, VI = 18.5 V to 28.5 V 54 V mV mV mA mA Dropout Voltage IO = 1 A, TJ = +25C 2 V RO Output Resistance(15) f = 1 kHz 19 m ISC Short-Circuit Current VI = 35 V, TJ = +25C 250 mA TJ = +25C 2.2 A VDROP IPK Peak Current (15) Notes: 14. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 15. These parameters, although guaranteed, are not 100% tested in production. (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com 9 LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Electrical Characteristics (LM7815) Refer to the test circuit, -40C < TJ < 125C, IO = 500 mA, VI = 27 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified. Symbol Parameter Conditions Min. Typ. Max. TJ = +25C 17.3 18.0 18.7 Output Voltage IO = 5 mA to 1 A, PO 15 W, VI = 21 V to 33 V 17.1 18.0 18.9 Regline Line Regulation(16) TJ = +25C VI = 21 V to 33 V 15 360 VI = 24 V to 30 V 5 180 Regload Load Regulation(16) TJ = +25C IO = 5 mA to 1.5 A 15 360 IO = 250 mA to 750 mA 5 180 IQ Quiescent Current TJ = +25C 5.2 8.0 Quiescent Current Change IO = 5 mA to 1 A 0.5 VI = 21 V to 33 V 1.0 Output Voltage Drift(17) IO = 5 mA Output Noise Voltage f = 10 Hz to 100 kHz, TA = +25C VO IQ VO/T VN RR Ripple Rejection(17) f = 120 Hz, VI = 22 V to 32 V 53 Unit V mV mV mA mA -1 mV/C 110 V 69 dB Dropout Voltage IO = 1 A, TJ = +25C 2 V RO Output Resistance(17) f = 1 kHz 22 m ISC Short-Circuit Current VI = 35 V, TJ = +25C 250 mA TJ = +25C 2.2 A VDROP IPK Peak Current (17) Notes: 16. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 17. These parameters, although guaranteed, are not 100% tested in production. (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com 10 LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Electrical Characteristics (LM7818) Refer to the test circuit, -40C < TJ < 125C, IO = 500 mA, VI = 33 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified. Symbol Parameter Conditions Min. Typ. Max. Unit TJ = +25C 23.00 24.00 25.00 Output Voltage IO = 5 mA to 1 A, PO 15 W, VI = 27 V to 38 V 22.80 24.00 25.25 Regline Line Regulation(18) TJ = +25C VI = 27 V to 38 V 17 480 VI = 30 V to 36 V 6 240 Regload Load Regulation(18) TJ = +25C IO = 5 mA to 1.5 A 15 480 IO = 250 mA to 750 mA 5 240 IQ Quiescent Current TJ = +25C 5.2 8.0 Quiescent Current Change IO = 5 mA to 1 A 0.1 0.5 VI = 27 V to 38 V 0.5 1.0 Output Voltage Drift(19) IO = 5 mA -1.5 mV/C Output Noise Voltage f = 10 Hz to 100 kHz, TA = +25C 120 V 67 dB VO IQ VO/T VN RR Ripple Rejection(19) f = 120 Hz, VI = 28 V to 38 V 50 V mV mV mA mA Dropout Voltage IO = 1 A, TJ = +25C 2 V RO Output Resistance(19) f = 1 kHz 28 m ISC Short-Circuit Current VI = 35 V, TJ = +25C 230 mA TJ = +25C 2.2 A VDROP IPK Peak Current (19) Notes: 18. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 19. These parameters, although guaranteed, are not 100% tested in production. (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com 11 LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Electrical Characteristics (LM7824) Refer to the test circuit, 0C < TJ < 125C, IO = 1 A, VI = 10 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified. Symbol VO Regline Parameter Conditions Output Voltage Line Regulation(20) Min. Typ. Max. TJ = +25C 4.9 5.0 5.1 IO = 5 mA to 1 A, PO 15 W, VI = 7.5 V to 20 V 4.8 5.0 5.2 VI = 7.5 V to 25 V, IO = 500 mA 5.0 50.0 VI = 8 V to 12 V 3.0 50.0 VI = 7.3 V to 20 V 5.0 50.0 VI = 8 V to 12 V 1.5 25.0 9 100 TJ = +25C TJ = +25C, IO = 5 mA to 1.5 A Regload Load Regulation (20) IQ Quiescent Current IQ Quiescent Current Change VO/T Output Voltage Drift (21) IO = 5 mA to 1 A 9 100 IO = 250 mA to 750 mA 4 50 TJ = +25C 5 6 IO = 5 mA to 1 A 0.5 VI = 8 V to 25 V, IO = 500 mA 0.8 VI = 7.5 V to 20 V, TJ = +25C 0.8 IO = 5 mA Unit V mV mV mA mA -0.8 mV/C VN Output Noise Voltage f = 10 Hz to 100 kHz, TA = +25C 42 V RR Ripple Rejection(21) f = 120 Hz, VO = 500 mA, VI =8 V to 18 V 68 dB Dropout Voltage IO = 1 A, TJ = +25C 2 V RO Output Resistance(21) f = 1 kHz 17 m ISC Short-Circuit Current VI = 35 V, TJ = +25C 250 mA TJ = +25C 2.2 A VDROP IPK Peak Current (21) Notes: 20. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 21. These parameters, although guaranteed, are not 100% tested in production. (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com 12 LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Electrical Characteristics (LM7805A) Refer to the test circuit, 0C < TJ < 125C, IO = 1 A, VI = 15 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified. Symbol VO Regline Parameter Conditions Output Voltage Line Regulation(22) Min. Typ. Max. TJ = +25C 8.82 9.00 9.16 IO = 5 mA to 1 A, PO 15 W, VI = 11.2 V to 24 V 8.65 9.00 9.35 VI = 11.7 V to 25 V, IO = 500 mA 6 90 VI = 12.5 V to 19 V 4 45 VI = 11.5 V to 24 V 6 90 VI = 12.5 V to 19 V 2 45 TJ = +25C, IO = 5 mA to 1.5 A 12 100 TJ = +25C Regload Load Regulation (22) IQ Quiescent Current IQ Quiescent Current Change VO/T Output Voltage Drift (23) IO = 5 mA to 1 A 12 100 IO = 250 mA to 750 mA 5 50 TJ = +25C 5 6 IO = 5 mA to 1 A 0.5 VI = 12 V to 25 V, IO = 500 mA 0.8 VI = 11.7 V to 25 V, TJ = +25C 0.8 Unit V mV mV mA mA IO = 5 mA -1 mV/C VN Output Noise Voltage f = 10 Hz to 100 kHz, TA = +25C 58 V RR Ripple Rejection(23) f = 120 Hz, VO = 500 mA, VI =12 V to 22 V 62 dB Dropout Voltage IO = 1 A, TJ = +25C 2 V RO Output Resistance(23) f = 1 kHz 17 m ISC Short-Circuit Current VI = 35 V, TJ = +25C 250 mA TJ = +25C 2.2 A VDROP IPK Peak Current (23) Notes: 22. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 23. These parameters, although guaranteed, are not 100% tested in production. (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com 13 LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Electrical Characteristics (LM7809A) Refer to the test circuit, 0C < TJ < 125C, IO = 1 A, VI = 16 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified. Symbol VO Regline Parameter Conditions Output Voltage Line Regulation(24) Min. Typ. Max. TJ = +25C 9.8 10.0 10.2 IO = 5 mA to 1 A, PO 15 W, VI = 12.8 V to 25 V 9.6 10.0 10.4 VI = 12.8 V to 26 V, IO = 500 mA 8 100 VI = 13 V to 20 V 4 50 VI = 12.5 V to 25 V 8 100 VI = 13 V to 20 V 3 50 TJ = +25C, IO = 5 mA to 1.5 A 12 100 TJ = +25C Regload Load Regulation (24) IQ Quiescent Current IQ Quiescent Current Change VO/T Output Voltage Drift (25) IO = 5 mA to 1 A 12 100 IO = 250 mA to 750 mA 5 50 TJ = +25C 5 6 IO = 5 mA to 1 A 0.5 VI = 12.8 V to 25 V, IO = 500 mA 0.8 VI = 13 V to 26 V, TJ = +25C 0.5 Unit V mV mV mA mA IO = 5 mA -1 mV/C VN Output Noise Voltage f = 10 Hz to 100 kHz, TA = +25C 58 V RR Ripple Rejection(25) f = 120 Hz, VO = 500 mA, VI =14 V to 24 V 62 dB Dropout Voltage IO = 1 A, TJ = +25C 2 V RO Output Resistance(25) f = 1 kHz 17 m ISC Short-Circuit Current VI = 35 V, TJ = +25C 250 mA TJ = +25C 2.2 A VDROP IPK Peak Current (25) Notes: 24. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 25. These parameters, although guaranteed, are not 100% tested in production. (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com 14 LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Electrical Characteristics (LM7810A) Refer to the test circuit, 0C < TJ < 125C, IO = 1 A, VI = 19 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified. Symbol VO Regline Parameter Conditions Output Voltage Line Regulation(26) Min. Typ. Max. TJ = +25C 11.75 12.00 12.25 IO = 5 mA to 1 A, PO 15 W, VI = 14.8 V to 27 V 11.50 12.00 12.50 VI = 14.8 V to 30 V, IO = 500 mA 10 120 VI = 16 V to 22 V 4 120 VI = 14.5 V to 27 V 10 120 VI = 16 V to 22 V 3 60 TJ = +25C, IO = 5 mA to 1.5 A 12 100 TJ = +25C Regload Load Regulation (26) IQ Quiescent Current IQ Quiescent Current Change VO/T Output Voltage Drift (27) IO = 5 mA to 1 A 12 100 IO = 250 mA to 750 mA 5 50 TJ = +25C 5 6 IO = 5 mA to 1 A 0.5 VI = 14 V to 27 V, IO = 500 mA 0.8 VI = 15 V to 30 V, TJ = +25C 0.8 Unit V mV mV mA mA IO = 5 mA -1 mV/C VN Output Noise Voltage f = 10 Hz to 100 kHz, TA = +25C 76 V RR Ripple Rejection(27) f = 120 Hz, VO = 500 mA, VI =14 V to 24 V 60 dB Dropout Voltage IO = 1 A, TJ = +25C 2 V RO Output Resistance(27) f = 1 kHz 18 m ISC Short-Circuit Current VI = 35 V, TJ = +25C 250 mA TJ = +25C 2.2 A VDROP IPK Peak Current (27) Notes: 26. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 27. These parameters, although guaranteed, are not 100% tested in production. (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com 15 LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Electrical Characteristics (LM7812A) Refer to the test circuit, 0C < TJ < 125C, IO = 1 A, VI = 23 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified. Symbol VO Regline Parameter Conditions Output Voltage Line Regulation(28) Min. Typ. Max. TJ = +25C 14.75 15.00 15.30 IO = 5 mA to 1 A, PO 15 W, VI = 17.7 V to 30 V 14.40 15.00 15.60 VI = 17.4 V to 30 V, IO = 500 mA 10 150 VI = 20 V to 26 V 5 150 VI = 17.5 V to 30 V 11 150 VI = 20 V to 26 V 3 75 TJ = +25C, IO = 5 mA to 1.5 A 12 100 IO = 5 mA to 1 A 12 100 IO = 250 mA to 750 mA 5 50 5.2 6.0 TJ = +25C Regload Load Regulation (28) IQ Quiescent Current IQ Quiescent Current Change VO/T Output Voltage Drift TJ = +25C (29) IO = 5 mA to 1 A 0.5 VI = 17.5 V to 30 V, IO = 500 mA 0.8 VI = 17.5 V to 30 V, TJ = +25C 0.8 Unit V mV mV mA mA IO = 5 mA -1 mV/C VN Output Noise Voltage f = 10 Hz to 100 kHz, TA = +25C 90 V RR Ripple Rejection(29) f = 120 Hz, VO = 500 mA, VI =18.5 V to 28.5 V 58 dB Dropout Voltage IO = 1 A, TJ = +25C 2 V RO Output Resistance(29) f = 1 kHz 19 m ISC Short-Circuit Current VI = 35 V, TJ = +25C 250 mA TJ = +25C 2.2 A VDROP IPK Peak Current (29) Notes: 28. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 29. These parameters, although guaranteed, are not 100% tested in production. (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com 16 LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Electrical Characteristics (LM7815A) 5.75 3 VI = 10V VO = 5V IO = 5mA 5.5 5.25 5 4.75 2 1.5 1 .5 4.5 -50 -25 0 25 50 75 100 0 125 JUNCTION TEMPERATURE (C) QUIESCENT CURRENT (mA) NORMALIZED OUTPUT VOLTAGE (V) 7 1.01 1 0.99 -25 0 25 50 75 100 10 15 20 25 30 35 TJ = 25C VO = 5V IO = 10mA 6.5 6 5.5 5 4.5 4 125 JUNCTION TEMPERATURE (C) 5 10 15 20 25 30 35 INPUT VOLTAGE (V) Figure 4. Output Voltage (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 5 Figure 3. Peak Output Current VI - VO = 5V IO = 5mA 0.98 -50 0 INPUT-OUTPUT DIFFERENTIAL (V) Figure 2. Quiescent Current 1.02 TJ = 25C VO = 100mV 2.5 OUTPUT CURRENT (A) QUIESCENT CURRENT (mA) 6 Figure 5. Quiescent Current www.fairchildsemi.com 17 LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Typical Performance Characteristics 1 LM78XX Input 2 CI 0.33F 3 Output CO 0.1F Figure 6. DC Parameters 1 LM78XX Input 3 Output 2 270pF RL VO 2N6121 or EQ 0.33F VO 100 0V 30S Figure 7. Load Regulation 5.1 1 LM78XX Input 3 Output 0.33F 2 RL 470F 120Hz + Figure 8. Ripple Rejection (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com 18 LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Typical Applications LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Typical Applications (Continued) 1 LM78XX Input CI 2 3 Output CO 0.33F 0.1F Figure 9. Fixed-Output Regulator 1 Input CI 3 LM78XX 2 CO 0.33F Output V XX 0.1F R1 IQ IO RL V XX IO = + R1 IQ Figure 10. Constant Current Regulator Notes: 29. To specify an output voltage, substitute voltage value for "XX". A common ground is required between the input and the output voltage. The input voltage must remain typically 2.0 V above the output voltage even during the low point on the input ripple voltage. 30. CI is required if regulator is located an appreciable distance from power supply filter. 31. CO improves stability and transient response. 1 Input CI 2 0.33F Output 3 LM78XX CO 0.1F V XX R1 IQ R2 IRI 5 IQ VO = VXX(1 + R2 / R1) + IQR2 Figure 11. Circuit for Increasing Output Voltage (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com 19 (Continued) Input 1 LM7805 Output 3 2 CI 0.33F - 2 LM741 + 3 4 6 CO 0.1F 10k IRI 5 IQ VO = VXX(1 + R2 / R1) + IQR2 Figure 12. Adjustable Output Regulator (7 V to 30 V) Q1 BD536 Input IQ1 R1 1 3 R1 = IO IREG V BEQ1 Output 3 LM78XX 2 0.1F 0.33F IREG-IQ1/ BQ1 IO = IREG + BQ1 (IREG-VBEQ1/R1) Figure 13. High-Current Voltage Regulator Input Q1 RSC Q2 R1 1 LM78XX 3 Output 3 0.33F Q1 = TIP42 Q2 = TIP42 RSC = 2 0.1F V BEQ2 I SC Figure 14. High Output Current with Short-Circuit Protection (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com 20 LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Typical Applications (Continued) 1 3 LM78XX VI VO 2 0.33F 0.1F 7 COMMON 6 COMMON 2 LM741 4 -VIN _ 4.7k + 3 4.7k -VO TIP42 Figure 15. Tracking Voltage Regulator 1 3 LM7815 +20V +15V 0.33F + 2 0.1F 1N4001 2.2F 1F + 1 2 -20V 1N4001 3 MC7915 -15V Figure 16. Split Power Supply (15 V - 1 A) (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com 21 LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Typical Applications (Continued) Output Input + 0.1F 2 1 3 LM78XX Figure 17. Negative Output Voltage Circuit D45H11 Input 1mH Output 470 4.7 Z1 1 + 0.33F LM78XX 3 2 10F + 0.5 2000F Figure 18. Switching Regulator (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com 22 LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Typical Applications LM78XX / LM78XXA -- 3-Terminal 1 A Positive Voltage Regulator Physical Dimensions Figure 19. TO-220, MOLDED, 3-LEAD, JEDEC VARIATION AB (ACTIVE) (c) 2006 Fairchild Semiconductor Corporation LM78XX / LM78XXA Rev. 1.3.1 www.fairchildsemi.com 23 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. F-PFS FRFET(R) SM Global Power Resource GreenBridge Green FPS Green FPS e-Series Gmax GTO IntelliMAX ISOPLANAR Making Small Speakers Sound Louder and BetterTM MegaBuck MICROCOUPLER MicroFET MicroPak MicroPak2 MillerDrive MotionMax MotionGrid(R) MTi(R) MTx(R) MVN(R) mWSaver(R) OptoHiT AccuPower Awinda(R) AX-CAP(R)* BitSiC Build it Now CorePLUS CorePOWER CROSSVOLT CTL Current Transfer Logic DEUXPEED(R) Dual CoolTM EcoSPARK(R) EfficientMax ESBC (R) Fairchild(R) Fairchild Semiconductor(R) FACT Quiet Series FACT(R) FAST(R) FastvCore FETBench FPS (R)* (R) (R) PowerTrench PowerXSTM Programmable Active Droop QFET(R) QS Quiet Series RapidConfigure Saving our world, 1mW/W/kW at a timeTM SignalWise SmartMax SMART START Solutions for Your Success SPM(R) STEALTH SuperFET(R) SuperSOT-3 SuperSOT-6 SuperSOT-8 SupreMOS(R) SyncFET Sync-LockTM TinyBoost(R) TinyBuck(R) TinyCalc TinyLogic(R) TINYOPTO TinyPower TinyPWM TinyWire TranSiC TriFault Detect TRUECURRENT(R)* SerDes UHC(R) Ultra FRFET UniFET VCX VisualMax VoltagePlus XSTM XsensTM TM * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR WEBSITE AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are 2. A critical component in any component of a life support, device, or intended for surgical implant into the body or (b) support or sustain system whose failure to perform can be reasonably expected to life, and (c) whose failure to perform when properly used in cause the failure of the life support device or system, or to affect its accordance with instructions for use provided in the labeling, can be safety or effectiveness. reasonably expected to result in a significant injury of the user. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I71 (c) Fairchild Semiconductor Corporation www.fairchildsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com