BXEB-L1120Z-57E4000-C-B3 - Bridgelux, Inc.

Bridgelux® EB Series™ Gen 2

Product Data Sheet DS131

Introduction

EB Series Gen 2 Linears are designed for use in premium indoor or industrial applications where a high level of ecacy

is required. The new generation uses the high-ecacy SMDs to achieve up to 180lm/W, which enables designers and

xture manufacturers to meet DLC Premium requirements. They are designed for linear troers, pendants and other

luminaires in indoor commercial and industrial applications.

Available in 280 mm, 560 mm, and 1120 mm lengths, the modules can be connected end-to-end thereby providing

exibility in designing luminaires. The Zhaga compatible modules further simplify design by providing easy mounting

options, reusable poke-in connectors and by being compatible with a variety of o-the-shelf optics. The modules have

long lifetimes of greater than 50,000 hours.

EB Series™

Features

• Leading ecacy, up to 180 lm/W typical with 2x

overdrive capability

• Ideal for DLC Premium Application

• Uniform, high quality illumination

• Available in a variety of color temperatures

• Designed following Zhaga Book 7 standards L28W2

and L56W2

• ENERGY STAR® / ANSI compliant 3 SDCM color

binning structure

• Lumen output of up to 2386lm, 4772lm, and 9544lm

for 280mm, 560mm and 1120mm modules

Benets

• Compact system design

• High quality, true color reproduction

• Enhanced optical control

• Uniform, consistent white light

• Reliable use at elevated currents enables greater

design exibility

• Easy installation using mounting cutout and connec-

tors

• Long lifetime of > 50,000 hours

• Easy wiring enabled by poke-in connectors

Contents

Product Feature Map 2

Product Nomenclature 2

Product Selection Guide 3

Electrical Characteristics 4

Absolute Maximum Ratings 5

Performance Curves 6

Typical Radiation Pattern 8

Typical Color Spectrum 9

Mechanical Dimensions 10

Color Binning Information 12

Packaging and Labeling 13

Design Resources 14

Precautions 14

Disclaimers 14

About Bridgelux 15

Product Feature Map

Bridgelux EB Series Gen 2 Linears are fully engineered devices that provide consistent thermal and optical performance

on an engineered mechanical platform. The linear products incorporate several features to simplify design integration and

assembly. Please visit www.bridgelux.com for more information on the EB Series family of products.

Product Nomenclature

The part number designation for Bridgelux EB Series Gen 2 is explained as follows:

Nominal CCT

30 = 3000 K

35 = 3500 K

40 = 4000 K

50 = 5000 K

57 = 5700 K

1 2 3 4 - 5 6 7 8 9 10 - 11 12 13 14 15 16 - 17 – 18

BXEB L0280Z 1000 B3

Product Family CCT Bin Options

B = Version

3 = 3 SDCM

Nominal Flux

1000 = 1000 lm

2000 = 2000 lm

4000 = 4000 lm

Module Conguration

Nominal Dimensions

L= Length

0280 = 280 mm

0560 = 560 mm

1120 = 1120 mm

Z= Zhaga compatible width (24 mm)

30 E

Minimum

CRI

E = 80

–– – –

Zhaga compatible mounting holes Re-usable connector

Designed to comply with global

safety standards for creepage

and clearance distances

Note: Label containing part number and lot codes is attached on the

front of the module.

Case Temperature Measurement Points Optic mounting holes

Product Selection Guide

The following product congurations are available:

Table 1: Selection Guide, Measurement Data (Tc = 25° C)

Part Number Nominal CCT1

(K) CRI2

Nominal Drive

Current

(mA)

Typical Flux3,4

Tc2 = 25º C

(lm)

Minimum Flux4,5

Tc2 = 25º C

(lm)

Typical Vf

(V)

Typical

Power

(W)

Typical

Ecacy

(lm/W)

BXEB-L0280Z-30E1000-C-B3 3000

80 350

1195 1076 19.5 6.8 175

BXEB-L0280Z-35E1000-C-B3 3500 1195 1076 19.5 6.8 175

BXEB-L0280Z-40E1000-C-B3 4000 1230 1107 19.5 6.8 180

BXEB-L0280Z-50E1000-C-B3 5000 1230 1107 19.5 6.8 180

BXEB-L0280Z-57E1000-C-B3 5700 1230 1107 19.5 6.8 180

BXEB-L0560Z-30E2000-C-B3 3000

80 700

2390 2151 19.5 13.6 175

BXEB-L0560Z-35E2000-C-B3 3500 2390 2151 19.5 13.6 175

BXEB-L0560Z-40E2000-C-B3 4000 2460 2214 19.5 13.6 180

BXEB-L0560Z-50E2000-C-B3 5000 2460 2214 19.5 13.6 180

BXEB-L0560Z-57E2000-C-B3 5700 2460 2214 19.5 13.6 180

BXEB-L1120Z-30E4000-C-B3 3000

80 700

4780 4302 39.0 27.3 175

BXEB-L1120Z-35E4000-C-B3 3500 4780 4302 39.0 27.3 175

BXEB-L1120Z-40E4000-C-B3 4000 4920 4428 39.0 27.3 180

BXEB-L1120Z-50E4000-C-B3 5000 4920 4428 39.0 27.3 180

BXEB-L1120Z-57E4000-C-B3 5700 4920 4428 39.0 27.3 180

Notes for Table 1:

1. Nominal CCT as dened by ANSI C78.377-2011.

2. CRI Values are minimums.

3. Products tested at nominal test current where temperature of center case temperature point Tc= 25° C. Values may vary depending on the thermal design

of the luminaire and/or the exposed environment to which the product is subjected.

4. Bridgelux maintains a ± 7% tolerance on ux measurements.

5. Minimum performance values are provided as reference only and are not a guarantee of performance.

Electrical Characteristics

Table 2: Electrical Characteristics

Part Number Drive Current

(mA)

Forward Voltage

Tc2 = 25º C (V) 1, 2,3 Typical

Coecient

of Forward

Voltage4

∆Vf/∆T

(mV/º C)

Driver Selection

Voltages5

(V)

Minimum Typical Maximum Vf Min, Hot

Tc2 = 85º C (V)

Vf Max, Cold

Tc2 = -40º

C (V)

BXEB-L0280Z-xxx1000-C-B3

350 18.5 19.5 20.6 -7.0 18.1 21.1

700 19.4 20.5 21.6 -7.0 19.0 22.1

BXEB-L0560Z-xxx2000-C-B3

700 18.5 19.5 20.6 -7.0 18.1 21.1

1400 19.4 20.5 21.6 -7.0 19.0 22.1

BXEB-L1120Z-xxx4000-C-B3

700 37.0 39.0 41.2 -14.0 36.2 42.1

1400 38.8 41.0 43.2 -14.0 38.0 44.1

Notes for Table 2:

1. Voltage minimum and maximum are provided for reference only and are not a guarantee of performance.

2. Bridgelux maintains a tolerance of ± 0.10 V on forward voltage measurements.

3. This product has been designed and manufactured per IEC 62031:2014. The working voltage designated for the insulation is 60 V d.c. The maximum allow-

able voltage across the module must be determined in the end product application.

4. Typical coecient of forward voltage tolerance is ± 0.1 mV for nominal current.

5. Vf min hot and max cold values are provided as reference only and are not guaranteed. These values are provided to aid in driver design and selection

over the operating range of the product.

Absolute Maximum Ratings

Table 3: Maximum Ratings

Parameter Maximum Rating

Storage Temperature -40°C to +85°C

Operating Case Temperature1 (Tc) 85°C

Soldering Temperature2350°C or lower for a maximum of 5 seconds

Maximum Reverse Voltage Linears are not designed to be driven in reverse bias

BXEB-L0280Z-xxx1000-C-B3 BXEB-L0560Z-xxx2000-C-B3 BXEB-L1120Z-xxx4000-C-B3

Maximum Drive Current3700mA 1400mA 1400mA

Notes for Table 3:

1. For IEC 62717 requirement, please consult your Bridgelux sales representative.

2. Lumen maintenance (L70) and lifetime predictions are valid for drive current and case temperature conditions used for LM-80 testing as included in the applicable

LM-80 test report for the SMDs used in the modules. Contact your Bridgelux sales representatives for LM-80 report.

Performance Curves

Figure 1: 280mm Current vs. Forward Voltage, Tc=25°C Figure 2: 280mm Relative Flux vs. Current, Tc=25°C

50%

100%

150%

200%

250%

0200 400 600 800

Relative Luminous Flux (%)

Drive Current (mA)

100

200

300

400

500

600

700

800

18.0 18.5 19.0 19.5 20.0 20.5 21.0

Forward Current (mA)

Forward Voltage (V)

50%

100%

150%

200%

250%

0 500 1000 1500

Relative Luminous Flux (%)

Drive Current (mA)

200

400

600

800

1000

1200

1400

1600

18.0 18.5 19.0 19.5 20.0 20.5 21.0

Forward Current (mA)

Forward Voltage (V)

Figure 3: 560mm Current vs. Forward Voltage, Tc=25°C Figure 4: 560mm Relative Flux vs. Current, Tc=25°C

50%

100%

150%

200%

250%

0 500 1000 1500

Relative Luminous Flux (%)

Drive Current (mA)

200

400

600

800

1000

1200

1400

1600

36.0 37.0 38.0 39.0 40.0 41.0 42.0

Forward Current (mA)

Forward Voltage (V)

Figure 5: 1120mm Current vs. Forward Voltage, Tc=25°C Figure 6: 1120mm Relative Flux vs. Current, Tc=25°C

Performance Curves

Figure 4: 560mm Relative Flux vs. Current, Tc=25°C

90%

92%

94%

96%

98%

100%

102%

020 40 60 80 100

Relative Luminous Flux (%)

Case Temperature (°C)

25°C Pulsed

Figure 7: Relative Flux vs. Case Temperature

97.5%

98.0%

98.5%

99.0%

99.5%

100.0%

100.5%

020 40 60 80 100

Relative Voltage

Case Temperature (°C)

25°C Pulsed

Figure 8: Relative Voltage vs. Case Temperature

Typical Radiation Pattern

Figure 9: Typical Spatial Radiation Pattern

Notes for Figure 9:

1. Typical viewing angle is 120⁰.

2. The viewing angle is dened as the o axis angle from the centerline where Iv is ½ of the peak value.

20%

40%

60%

80%

100%

120%

-100 -80 -60 -40 -20 020 40 60 80 100

Relative Intensity

Angle (°)

Typical Color Spectrum

Figure 10: Typical Color Spectrum

Note for Figure 10:

1. Color spectra measured at nominal current for Tc2 = 50°C.

2. Color spectra shown for 30E is 3000K and 80 CRI.

3. Color spectra shown for 40E is 4000K and 80 CRI.

4. Color spectra shown for 57E is 5700K and 80 CRI.

20%

40%

60%

80%

100%

120%

400 450 500 550 600 650 700 750 800

Relative Intensity

Wavelength (nm)

30E

40E

50E

Mechanical Dimensions

Figure 11: Drawing for EB Series Gen2 280mm

Parameter Specication Unit

Linear length 280 mm

Linear width 24 mm

Linear thickness 6.1 mm

PCB thickness 1.6 mm

Table 4: Dimensions for 280mm

Figure 12: Drawing for EB Series Gen2 560mm

Parameter Specication Unit

Linear length 560 mm

Linear width 24 mm

Linear thickness 6.1 mm

PCB thickness 1.6 mm

Table 5: Dimensions for 560mm

Table 7: Connector and wiring

Mechanical Dimensions

Parameter Specication

Input wire cross-section 18-24 AWG

Terminal strip length 7-9 mm

Notes for Figures 11, 12 & 13:

1. Solder pads are labeled “+” to denote positive polarity, and “-” to denote negative polarity.

2. Drawings are not to scale.

3. Drawing dimensions are in millimeters.

4. Unless otherwise specied, the tolerances are ± 0.10mm..

Figure 13: Drawing for EB Series Gen2 1120mm

Parameter Specication Unit

Linear length 1120 mm

Linear width 24 mm

Linear thickness 6.1 mm

PCB thickness 1.6 mm

Table 6: Dimensions for 1120mm

Color Binning Information

Figure 14: Graph of Warm and Neutral White Test Bins in xy Color Space

Bin Code 3000K 3500 K 4000K

ANSI Bin

(for reference only) (2870K - 3220K) (3220K - 3710K) (3710K - 4260K)

B3 (3SDCM) (2968K - 3136K) (3369K - 3586K) (3851K - 4130K)

Center Point (x,y) (0.4338, 0.403) (0.4073, 0.3917) (0.3818, 0.3797)

Table 8: Warm and Neutral White xy Bin Coordinates and Associated Typical CCT

Figure 15: Graph of Cool White Test Bins in xy Color Space

Bin Code 5000K 5700K

ANSI Bin

(for reference only) (4745K - 5311K) (5312K - 6022K)

B3 (3SDCM) (4835K - 5155K) (5445K - 5850K)

Center Point (x,y) (0.3447, 0.3553) (0.3287, 0.3417)

Notes for Tables 8 and 9

1. Color binning at solder point temperature Tsp of SMDs at 85°C.

2. Bridgelux maintains a tolerance of ± 0.007 on x and y color coordinates in the CIE 1931 color space.

Table 9: Cool White xy Bin Coordinates and Associated Typical CCT

Packaging and Labeling

Figure 16: EB Series Packaging and Labeling

Customer Use- 2D Barcode

Scannable barcode provides

product part number and other

Bridgelux internal production

information.

EB Series Gen2

1ft 1000lm 350mA

L0280 modules Tray Box Shipping Box

Quantity 40 200 400

Dimension 63 cm x 39 cm x 2.4 cm 63.5 cm x 41.5 cm x 13.5 cm 134 cm x 43.5 cm x 18 cm

Figure 17: Product Labeling

Bridgelux EB Series modules contain a label on the front to help with product identication. In addition to the product

identication markings, Bridgelux EB Series modules also contain markings for internal Bridgelux manufacturing use

only. The image below shows which markings are for customer use and which ones are for Bridgelux internal use only.

The Bridgelux internal manufacturing markings are subject to change without notice, however these will not impact the

form, function or performance of the module.

Table 10: Packaging Structure

L0560 modules Tray Box Shipping Box

Quantity 20 100 200

Dimension 63 cm x 39 cm x 2.4 cm 63.5 cm x 41.5 cm x 13.5 cm 134 cm x 43.5 cm x 18 cm

L1120 modules Tray Box Shipping Box

Quantity 20 n/a 100

Dimension 119 cm x 39 cm x 2.4 cm n/a 134 cm x 43.5 cm x 18 cm

Design Resources

Disclaimers

Precautions

Application Notes

Bridgelux has developed a comprehensive set of

application notes and design resources to assist

customers in successfully designing with the EB

Series product family. For a list of resources under

development, visit www.bridgelux.com.

Optical Source Models

Optical source models and ray set les are available

for all Bridgelux products. For a list of available formats,

visit www.bridgelux.com.

MINOR PRODUCT CHANGE POLICY

The rigorous qualication testing on products oered

by Bridgelux provides performance assurance. Slight

cosmetic changes that do not aect form, t, or function

may occur as Bridgelux continues product optimization.

CAUTION: CHEMICAL EXPOSURE HAZARD

Exposure to some chemicals commonly used in

luminaire manufacturing and assembly can cause

damage to the LED linear. Please consult Bridgelux

Application Note for additional information.

CAUTION: EYE SAFETY

Eye safety classication for the use of Bridgelux EB

Series is in accordance with IEC/TR62778: Application of

IEC 62471 for the assessment of blue light hazard to light

sources and luminaires. EB Series linears are classied

as Risk Group 1 (TBD) when operated at or below

the maximum drive current. Please use appropriate

precautions. It is important that employees working with

LEDs are trained to use them safely.

CAUTION: RISK OF BURN

Do not touch the EB Series linears during operation.

Allow the linear to cool for a sucient period of time be-

fore handling. The EB Series linears may reach elevated

temperatures such that could burn skin when touched.

3D CAD Models

Three dimensional CAD models depicting the product

outline of all Bridgelux EB Series LED linears are avail-

able in both IGES and STEP formats. Please contact your

Bridgelux sales representative for assistance.

CAUTION

CONTACT WITH LIGHT EMITTING SURFACE (LES)

Avoid any contact with the LES. Do not touch the

LES of the linear or apply stress to the LES

(yellow phosphor resin area). Contact may cause

damage to the linear.

Optics and reectors must not be mounted in contact

with the LES (yellow phosphor resin area). Optical

devices may be mounted on the top surface of the EB

Series linear. Use the mechanical features of the linear

housing, edges and/or mounting holes to locate and

secure optical devices as needed.

STANDARD TEST CONDITIONS

Unless otherwise stated, linear testing is performed at

the nominal drive current.

About Bridgelux: We Build Light That Transforms

trademarks of Bridgelux, Inc, and EB Series is a trademark of Bridgelux, Inc. All other trademarks are the property of their respective owners.

Bridgelux EB Series Gen2 Data Sheet DS131 Rev. A (10/2017)

46430 Fremont Blvd

Fremont, CA 94538

Tel (925) 583-8400

Fax (925) 583-8401

www.bridgelux.com

At Bridgelux, we help companies, industries and people experience the power and possibility

of light. Since 2002, we’ve designed LED solutions that are high performing, energy ecient,

cost eective and easy to integrate. Our focus is on light’s impact on human behavior, delivering

products that create better environments, experiences and returns—both experiential and

nancial. And our patented technology drives new platforms for commercial and industrial

luminaires.

For more information about the company, please visit

bridgelux.com

twitter.com/Bridgelux

facebook.com/Bridgelux

youtube.com/user/Bridgelux

linkedin.com/company/bridgelux-inc-_2

WeChat ID: BridgeluxInChina