Silizium-PIN-Fotodiode mit sehr kurzer Schaltzeit Silicon PIN Photodiode with Very Short Switching Time Lead (Pb) Free Product - RoHS Compliant SFH 213 SFH 213 FA SFH 213 FA SFH 213 Wesentliche Merkmale Features * Speziell geeignet fur Anwendungen im Bereich von 400 nm bis 1100 nm (SFH 213) und bei 880 nm (SFH 213 FA) * Kurze Schaltzeit (typ. 5 ns) * 5 mm-Plastikbauform im LED-Gehause * Auch gegurtet lieferbar * Especially suitable for applications from 400 nm to 1100 nm (SFH 213) and of 880 nm (SFH 213 FA) * Short switching time (typ. 5 ns) * 5 mm LED plastic package * Also available on tape and reel Anwendungen Applications * Industrieelektronik * Messen/Steuern/Regeln" * Schnelle Lichtschranken fur Gleich- und Wechsellichtbetrieb * LWL * * * * Typ Type Bestellnummer Ordering Code SFH 213 Q62702P0930 SFH 213 FA Q62702P1671 2007-04-02 1 Industrial electronics For control and drive circuits Photointerrupters Fiber optic transmission systems SFH 213, SFH 213 FA Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg - 40 ... + 100 C Sperrspannung Reverse voltage VR 50 V Verlustleistung Total power dissipation Ptot 150 mW Kennwerte (TA = 25 C) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit SFH 213 SFH 213 FA IP 135 ( 100) - A IP - 90 ( 65) A Wellenlange der max. Fotoempfindlichkeit Wavelength of max. sensitivity S max 850 900 nm Spektraler Bereich der Fotoempfindlichkeit S = 10% von Smax Spectral range of sensitivity S = 10% of Smax 400 ...1100 750 ... 1100 nm Bestrahlungsempfindliche Flache Radiant sensitive area A 1 1 mm2 Abmessung der bestrahlungsempfindlichen Flache Dimensions of radiant sensitive area LxB LxW 1x1 1x1 mm x mm Halbwinkel Half angle 10 10 Grad deg. Dunkelstrom, VR = 20 V Dark current IR 1 ( 5) 1 ( 5) nA Spektrale Fotoempfindlichkeit, = 870 nm Spectral sensitivity S 0.62 0.59 A/W Quantenausbeute, = 870 nm Quantum yield 0.89 0.86 Electrons Photon Fotostrom Photocurrent VR = 5 V, Normlicht/standard light A, T = 2856 K, EV = 1000 lx VR = 5 V, = 870 nm, Ee = 1 mW/cm2 2007-04-02 2 SFH 213, SFH 213 FA Kennwerte (TA = 25 C) Characteristics (cont'd) Bezeichnung Parameter Symbol Symbol Wert Value SFH 213 SFH 213 FA Einheit Unit Leerlaufspannung Open-circuit voltage Ev = 1000 Ix, Normlicht/standard light A, T = 2856 K Ee = 0.5 mW/cm2, = 870 nm VO 430 ( 350) - mV VO - 380 ( 300) mV Kurzschlustrom Short-circuit current Ev = 1000 Ix, Normlicht/standard light A, T = 2856 K Ee = 0.5 mW/cm2, = 870 nm ISC 125 - A ISC - 42 A Anstiegs- und Abfallzeit des Fotostromes Rise and fall time of the photocurrent RL = 50 ; VR = 20 V; = 850 nm; Ip = 800 A tr , tf 5 5 ns Durchlaspannung, IF = 80 mA, E = 0 Forward voltage VF 1.3 1.3 V Kapazitat, VR = 0 V, f = 1 MHz, E = 0 Capacitance C0 11 11 pF Temperaturkoeffizient von VO Temperature coefficient of VO TCV - 2.6 - 2.6 mV/K Temperaturkoeffizient von ISC Temperature coefficient of ISC Normlicht/standard light A = 870 nm TCI Rauschaquivalente Strahlungsleistung Noise equivalent power VR = 10 V, = 870 nm Nachweisgrenze, VR = 20 V, = 870 nm Detection limit 2007-04-02 3 %/K 0.18 - - 0.2 NEP 2.9 x 10- 14 2.9 x 10- 14 D* 3.5 x 1012 3.5 x 1012 W -----------Hz cm x Hz -------------------------W SFH 213, SFH 213 FA Relative Spectral Sensitivity SFH 213, Srel = f () OHF01034 100 Relative Spectral Sensitivity SFH 213 FA, Srel = f () S rel % 80 80 60 60 40 40 20 20 0 400 600 800 1000 nm 1200 Photocurrent IP = f (Ee), VR = 5 V Open-Circuit Voltage VO = f (Ee) SFH 213 FA OHF01773 100 S rel % Photocurrent IP = f (Ev), VR = 5 V Open-Circuit Voltage VO = f (Ev) SFH 213 0 400 600 800 1000 nm 1200 Total Power Dissipation Ptot = f (TA) Dark Current IR = f (VR), E = 0 OHF00394 160 mW Ptot 140 R OHF01026 10 4 pA 120 10 3 100 80 60 10 2 40 20 0 0 20 40 60 Directional Characteristics Srel = f () 2007-04-02 4 80 C 100 TA 10 1 0 10 20 V VR 30 SFH 213, SFH 213 FA Mazeichnung Package Outlines 9.0 (0.354) 8.2 (0.323) o5.1 (0.201) 0.8 (0.031) 0.5 (0.020) 1.8 (0.071) 1.2 (0.047) 29 (1.142) 27 (1.063) o4.8 (0.189) 7.5 (0.295) Area not flat 2.54 (0.100) spacing 0.6 (0.024) 0.4 (0.016) 7.8 (0.307) 5.9 (0.232) 5.5 (0.217) 5.7 (0.224) 0.6 (0.024) 5.1 (0.201) Chip position 0.4 (0.016) Cathode (Diode) Collector (Transistor) GEXY6260 Mae in mm (inch) / Dimensions in mm (inch). Lotbedingungen Soldering Conditions Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2007-04-02 5 s 250 SFH 213, SFH 213 FA Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2007-04-02 6