SPECIFICATION CONTROL DRAWING Product Rev. Product Name Ident. Code Product Dimensions oB oC L1.75 min min (L0.070) 16.50 1.90 2.65 (0.650) (0.075) (0.105) 16.50 2.65 3.68 (0.650) (0.105) (0.145) 16.50 4.30 5.08 (0.650) (0.170) (0.200) oD max 1.90 (0.075) 2.65 (0.105) 4.30 (0.170) Cable Dimensions oE oF max min 2.65 0.90 (0.105) (0.035) 3.68 1.40 (0.145) (0.055) 5.08 2.15 (0.200) (0.085) oG min 0.50 (0.020) 0.75 (0.030) 1.25 (0.050) SO63-1-W2-24-00-100 N/C SO631R SO63-2-W2-24-00-100 N/C SO632R SO63-3-W2-24-00-100 N/C SO633R SO63-4-W2-24-00-100 N/C SO634R 19.10 (0.750) 5.95 (0.235) 6.45 (0.255) 5.95 (0.235) 6.45 (0.255) 3.30 (0.130) 1.80 (0.070) SO63-5-W2-24-00-100 N/C SO635R 19.10 (0.750) 7.00 (0.275) 7.60 (0.300) 7.00 (0.275) 7.60 (0.300) 4.30 (0.170) 2.50 (0.100) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. THERMAL INDICATOR: Fusible ring, melt point: 221C. 3. MELTABLE RING: Environment resistant thermoplastic. Color: blue. 4. GROUND LEAD: Un-insulated Stranded Silver-plated Copper in accordance with Boeing 5M2409 Specification, AWG 24. APPLICATION 1. These parts will provide a shield termination assembly when installed in accordance to Raychem RCPS-100-70 on cables rated for at least 125C, meeting the dimensional criteria listed, having tin or silver plated shields. 2. Temperature rating: -55C to +150C. 3. Parts shall be marked with identification code per table. For best results, prepare the cable as shown: "G" is the minimum diameter on which the sleeve will seal. TITLE: 305 Constitution Drive Menlo Park, CA 94025, USA Unless otherwise specified dimensions are in millimeters. Inches dimensions are in between brackets. Tyco Electronics reserves the right to ANGLES: N/A TOLERANCES: amend this drawing at any time. Users 0.00 N/A should evaluate the suitability of the ROUGHNESS IN 0.0 N/A product for their application. MICRON 0 N/A SOLDERSLEEVE SHIELD TERMINATOR ENVIRONMENT RESISTANT WITH LEAD DOCUMENT NO.: SO63-X-W2-24-00-100 DCR NUMBER: REPLACES: D020447 PREPARED BY: DATE: PROD. REV. DOC ISSUE: mforonda 9-Oct-02 SEE TABLE 1 If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: None D020331 SIZE: A SHEET: 1 of 1