Bahco Group - Product Card Rx Series Diagonal cutters Oval head, RX 8130-RX 8162 These cutters are made from high performance ball bearing steel, black oxidised. Numerically controlled machine grinding guarantees edge angle accuracy and contact which increases the tools reliability and consistency. Precision induction hardened edges 63-65 HRC. Handles in two component synthetic material and come with return spring. The cutting capacity that is given is for copper wire! These Oval Head cutters are ideal for wire harness work and standard printed circuit board assembly. RX 8130 A B C mm mm mm D F mmmm 0103003 1 133.5 8.5 8.0 5 0.8 0.2-1.0 Micro 68 RX 8131 0103010 1 133.5 8.5 8.0 5 0.8 0.1-1.0 Flush 68 RX 8132 0103027 1 133.5 8.5 8.0 5 0.8 0.1-0.8 Ultra 68 RX 8140 0103034 1 135.5 10.5 10.0 6 0.8 0.2-1.25 Micro 70 RX 8141 0103041 1 135.5 10.5 10.0 6 0.8 0.1-1.25 Flush 70 RX 8142 0103058 1 135.5 10.5 10.0 6 0.8 0.1-1.0 Ultra 70 RX 8150 0103133 1 138.0 13.0 12.5 6 1.2 0.3-1.6 Micro 73 RX 8151 0103140 1 138.0 13.0 12.5 6 1.2 0.2-1.6 Flush 73 RX 8152 0103157 1 138.0 13.0 12.5 6 1.2 0.2-1.25 Ultra 73 RX 8160 0111534 10 147.0 16.0 16.0 8 1.6 0.4-2.0 Micro 97 RX 8161 0111541 10 147.0 16.0 16.0 8 1.6 0.3-2.0 Flush 97 RX 8162 0111558 10 147.0 16.0 16.0 8 1.6 0.3-1.6 Ultra 97 http://extranet.bahco.com/catalogue/ProdCard.asp?showOnlyOne=true&this_might_p... 25/09/2003