NUMBER GS-12-547
TYPE PRODUCT SPECIFICATION
TITLE PAGE REVISION
0.8mm BergStak® Product Specification 5 of 8 G
AUTHORIZED BY DATE
Bob Gu 27 Feb 17
CLASSIFICATION
UNRESTRICTED
Copyright FCI
Form E-3334
Rev F
GS-01-001
6.2.7 Shock
EIA-364-27, Test Condition A
Accelerated velocity ----- 490 m/s2 (50G).
Waveform ------------------ half-sine shock pulse.
Duration -------------------- 11 mSec.
Velocity change ----------- 11.3 feet per second
Number of cycles --------- 18
6.2.8 Mating Force
EIA-364-13
Operating speed ---------- 25 mm/minute
No lubrication and utilize free-floating fixture.
Number of connectors -------- 5 mated pair
6.2.9 Un-mating Force
EIA-364-13
Operating speed ---------- 25 mm/minute
No lubrication and utilize free-floating fixture.
Number of connectors -------- 5 mated pair
6.2.10 Durability
EIA-364-09
Operating speed ---------- 25 mm/minute
Number of cycles ------------- 100
Pre-Conditioning cycles ------ 25
6.2.11 Solderability
For leaded:
Solder temperature ------- 230 ± 5°C.
Immersion duration ------- 3± 0.5 seconds
Flux immersion ------------ 5 to 10 seconds
Flux and solder material are defined in MIL-STD-202, method 208
For Non- leaded:
Solder temperature ------- 260 ± 5°C.
Immersion duration ------- 3± 0.5 seconds
Flux immersion ------------ 5 to 10 seconds
Flux and solder material are defined in MIL-STD-202, method 208
6.2.12 Resistance to Solder Heat
For leaded:
Peak temperature --------- 240 ± 5°C.
Duration --------------------- 10 seconds
For Non- leaded:
Peak temperature --------- 260 ± 5°C.
Duration --------------------- 30 seconds
6.2.13 Contact Retention Force Operating speed ---------- 25 mm/minute
Number of readings ------ 30 (10 readings per connector set)
6.2.14 Reseating Perform 3 cycles mate/unmate
6.2.15 Thermal Shock
EIA-364-32 Method A
Temperature range ------- -40 +0/-5°C to 125 +5/-0°C
Time at temperature extremes ----- 30 minutes
Test Duration (A-4) --------- 10 cycles
Transfer Time ---------------- 5 minutes maximum
PDS: Rev :G STATUS:Released Printed: Mar 07, 2017