LM4030 www.ti.com SNVS552B - MARCH 2008 - REVISED APRIL 2013 LM4030 SOT-23 Ultra-High Precision Shunt Voltage Reference Check for Samples: LM4030 FEATURES DESCRIPTION * * * * * * * * * The LM4030 is an ultra-high precision shunt voltage reference, having exceptionally high initial accuracy (0.05%) and temperature stability (10ppm/C). The LM4030 is available with fixed voltage options of 2.5V and 4.096V. Despite the tiny SOT-23 package, the LM4030 exhibits excellent thermal hysteresis (75ppm) and long-term stability (40ppm) as well as immunity to board stress effects. 1 2 High Output Voltage Accuracy 0.05% Low Temperature Coefficient 10 ppm/C Extended Temperature Operation -40-125C Excellent Thermal Hysteresis, 75ppm Excellent Long-Term Stability, 40ppm High Immunity to Board Stress Effects Capable of Handling 50 mA Transients Voltage Options 2.5V, 4.096V SOT-23 Package The LM4030 is designed to operate without an external capacitor, but any capacitor up to 10F may be used. The LM4030 can be powered off as little as 120A (max) but is capable of shunting up to 30mA continuously. As with any shunt reference, the LM4030 can be powered off of virtually any supply and is a simple way to generate a highly accurate system reference. APPLICATIONS * * * * * * Data Acquisition/Signal path Test and Measurement Automotive & Industrial Communications Instrumentation Power Management The LM4030 is available in three grades (A, B, and C). The best grade devices (A) have an initial accuracy of 0.05% with ensured temperature coefficient of 10 ppm/C or less, while the lowest grade parts (C) have an initial accuracy of 0.15% and a temperature coefficient of 30 ppm/C. Typical Application Circuit VIN RZ IBIAS ILOAD VREF 4 ISHUNT COUT 5 Connection Diagram N/C 1 5 - GND 4 + VREF N/C or GND 2 N/C 3 SOT-23 Package (Top View) 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2008-2013, Texas Instruments Incorporated LM4030 SNVS552B - MARCH 2008 - REVISED APRIL 2013 www.ti.com PIN DESCRIPTIONS Pin # Name Function 1 N/C No connect pin, leave floating 2 GND, N/C Ground or no connect 3 N/C No connect pin, leave floating 4 VREF Reference voltsge 5 GND Ground These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. Absolute Maximum Ratings (1) (2) Maximum Voltage on any input Power Dissipation (TA = 25C) -0.3 to 6V (3) 350mW -65C to 150C Storage Temperature Range Lead Temperature (soldering, 10sec) 260C Vapor Phase (60 sec) 215C Infrared (15sec) 220C ESD Susceptibility (4) Human Body Model (1) (2) (3) (4) 2kV Absolute Maximum Ratings indicate limits beyond which damage may occur to the device. Operating Ratings indicate conditions for which the device is intended to be functional, but do not ensure specific performance limits. For ensured specifications, see Electrical Characteristics. If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and specifications. Without PCB copper enhancements. The maximum power dissipation must be de-rated at elevated temperatures and is limited by TJMAX (maximum junction temperature), J-A (junction to ambient thermal resistance) and TA (ambient temperature). The maximum power dissipation at any temperature is: PDissMAX = (TJMAX - TA) /J-A up to the value listed in the Absolute Maximum Ratings. J-A for SOT-23 package is 220C/W, TJMAX = 125C. The human body model is a 100 pF capacitor discharged through a 1.5 k resistor into each pin. Operating Ratings Maximum Continuous Shunt Current 30mA Maximum Shunt Current (<1s) 50mA -40C to +125C Junction Temperature Range (TJ) 2 Submit Documentation Feedback Copyright (c) 2008-2013, Texas Instruments Incorporated Product Folder Links: LM4030 LM4030 www.ti.com SNVS552B - MARCH 2008 - REVISED APRIL 2013 Electrical Characteristics LM4030-2.5 (VOUT = 2.5V) Limits in standard type are for TJ = 25C only, and limits in boldface type apply over the junction temperature (TJ) range of 40C to +125C. Minimum and Maximum limits are ensured through test, design, or statistical correlation. Typical values represent the most likely parametric norm at TJ = 25C, and are provided for reference purposes only. Symbol VREF Parameter Conditions Reverse Breakdown Voltage Min (1) ISHUNT = 120A Typ (2) Max (1) 2.5 Unit V Reverse Breakdown Voltage Tolerance (ISHUNT = 120A) IRMIN TC LM4030A-2.5 (A Grade - 0.05%) -0.05 0.05 % LM4030B-2.5 (B Grade - 0.10%) -0.10 0.10 % LM4030C-2.5 (C Grade - 0.15%) -0.15 0.15 % 120 A 0C TJ + 85C 10 ppm / C -40C TJ +125C 20 ppm / C LM4030B-2.5 -40C TJ +125C 20 ppm / C LM4030C-2.5 -40C TJ +125C Reverse Breakdown Voltage Change with Current 160A ISHUNT 30mA 25 Minimum Operating Current Temperature Coefficient (3) LM4030A-2.5 VREF/ISHUNT VREF VHYST VN (1) (2) (3) (4) (5) (6) 30 ppm / C 110 ppm / mA Long Term Stability (4) 1000 Hrs, TA = 30C 40 Thermal Hysteresis (5) -40C TJ +125C 75 ppm 0.1 Hz to 10 Hz 105 VPP Output Noise Voltage (6) ppm Limits are 100% production tested at 25C. Limits over the operating temperature range are ensured through correlation using Statistical Quality Control. Typical numbers are at 25C and represent the most likely parametric norm. Temperature coefficient is measured by the "Box" method; i.e., the maximum VREF is divided by the maximum T. Long term stability is VREF @25C measured during 1000 hrs. This measurement is taken for IR = 500 A. Thermal hysteresis is defined as the change in +25C output voltage before and after cycling the device from (-40C to 125C) eight times. Low frequency peak-to-peak noise measured using first-order 0.1 Hz HPF and second-order 10 Hz LPF. Electrical Characteristics LM4030-4.096 (VOUT = 4.096V) Limits in standard type are for TJ = 25C only, and limits in boldface type apply over the junction temperature (TJ) range of 40C to +125C. Minimum and Maximum limits are ensured through test, design, or statistical correlation. Typical values represent the most likely parametric norm at TJ = 25C, and are provided for reference purposes only. Symbol VREF Parameter Conditions Reverse Breakdown Voltage Min (1) ISHUNT = 130A Typ (2) Max (1) 4.096 Unit V Reverse Breakdown Voltage Tolerance ( ISHUNT = 130A) IRMIN TC LM4030A-4.096 (A Grade - 0.05%) -0.05 0.05 % LM4030B-4.096 (B Grade - 0.10%) -0.10 0.10 % LM4030C-4.096 (C Grade - 0.15%) -0.15 0.15 % 130 A 0C TJ + 85C 10 ppm / C Minimum Operating Current Temperature Coefficient (3) LM4030A-4.096 VREF/ILOAD (1) (2) (3) -40C TJ +125C 20 ppm / C LM4030B-4.096 -40C TJ +125C 20 ppm / C LM4030C-4.096 -40C TJ +125C 30 ppm / C Reverse Breakdown Voltage Change with Current 160A ISHUNT 30mA 95 ppm / mA 15 Limits are 100% production tested at 25C. Limits over the operating temperature range are ensured through correlation using Statistical Quality Control. Typical numbers are at 25C and represent the most likely parametric norm. Temperature coefficient is measured by the "Box" method; i.e., the maximum VREF is divided by the maximum T. Submit Documentation Feedback Copyright (c) 2008-2013, Texas Instruments Incorporated Product Folder Links: LM4030 3 LM4030 SNVS552B - MARCH 2008 - REVISED APRIL 2013 www.ti.com Electrical Characteristics LM4030-4.096 (VOUT = 4.096V) (continued) Limits in standard type are for TJ = 25C only, and limits in boldface type apply over the junction temperature (TJ) range of 40C to +125C. Minimum and Maximum limits are ensured through test, design, or statistical correlation. Typical values represent the most likely parametric norm at TJ = 25C, and are provided for reference purposes only. Symbol VREF Long Term Stability (4) VHYST Thermal Hysteresis (5) VN (4) (5) (6) 4 Parameter Output Noise Voltage (6) Conditions Min (1) Typ (2) Max (1) Unit 1000 Hrs, TA = 30C 40 -40C TJ +125C 75 ppm ppm 0.1 Hz to 10 Hz 165 VPP Long term stability is VREF @25C measured during 1000 hrs. This measurement is taken for IR = 500 A. Thermal hysteresis is defined as the change in +25C output voltage before and after cycling the device from (-40C to 125C) eight times. Low frequency peak-to-peak noise measured using first-order 0.1 Hz HPF and second-order 10 Hz LPF. Submit Documentation Feedback Copyright (c) 2008-2013, Texas Instruments Incorporated Product Folder Links: LM4030 LM4030 www.ti.com SNVS552B - MARCH 2008 - REVISED APRIL 2013 Typical Performance Characteristics for 2.5V Output Voltage vs Temperature 0.1 - 10 Hz Peak-to-Peak Noise 2.503 5 TYPICAL UNITS OUTPUT VOLTAGE (V) 2.502 2.501 2.5 2.499 2.498 2.497 -40 -20 0 20 40 60 80 100 120 TEMPERATURE (oC) Figure 1. Figure 2. Start Up - 120 A Start Up - 50 mA Figure 3. Figure 4. Reverse Breakdown Voltage Change with Current Reverse Dynamic Impedance vs Frequency Figure 5. Figure 6. Submit Documentation Feedback Copyright (c) 2008-2013, Texas Instruments Incorporated Product Folder Links: LM4030 5 LM4030 SNVS552B - MARCH 2008 - REVISED APRIL 2013 www.ti.com Typical Performance Characteristics for 4.096V 6 Output Voltage vs Temperature 0.1 - 10 Hz Peak-to-Peak Noise Figure 7. Figure 8. Start Up - 130 A Start Up - 50 mA Figure 9. Figure 10. Reverse Breakdown Voltage Change with Current Reverse Dynamic Impedance vs Frequency Figure 11. Figure 12. Submit Documentation Feedback Copyright (c) 2008-2013, Texas Instruments Incorporated Product Folder Links: LM4030 LM4030 www.ti.com SNVS552B - MARCH 2008 - REVISED APRIL 2013 Typical Performance Characteristics Forward Characteristic Load Transient Response Figure 13. Figure 14. Minimum Operating Current Noise Spectrum Figure 15. Figure 16. Thermal Hysteresis Distribution Output Voltage vs Thermal Cycle (-40C to 125C) 20 18 NUMBER OF UNITS 16 14 12 10 8 6 4 2 0 0 40 20 60 80 120 160 200 240 280 100 140 180 220 260 300 HYSTERESIS (PPM) Figure 17. Figure 18. Submit Documentation Feedback Copyright (c) 2008-2013, Texas Instruments Incorporated Product Folder Links: LM4030 7 LM4030 SNVS552B - MARCH 2008 - REVISED APRIL 2013 www.ti.com Typical Performance Characteristics (continued) 8 Long Term Stability (TA = 25C) Long Term Stability (TA =125C) Figure 19. Figure 20. Submit Documentation Feedback Copyright (c) 2008-2013, Texas Instruments Incorporated Product Folder Links: LM4030 LM4030 www.ti.com SNVS552B - MARCH 2008 - REVISED APRIL 2013 APPLICATION INFORMATION THEORY OF OPERATION The LM4030 is an ultra-high precision shunt voltage reference, having exceptionally high initial accuracy (0.05%) and temperature stability (10ppm/C). The LM4030 is available with fixed voltage options of 2.5V and 4.096V. Despite the tiny SOT-23 package, the LM4030 exhibits excellent thermal hysteresis (75ppm) and long-term stability (25ppm). The LM4030 is designed to operate without an external capacitor, but any capacitor up to 10 F may be used. The LM4030 can be powered off as little as 120 A (max) but is capable of shunting up to 30 mA continuously. The typical application circuit for the LM4030 is shown in Figure 21. VIN RZ IBIAS ILOAD VREF 4 ISHUNT COUT 5 Figure 21. Typical Application Circuit COMPONENT SELECTION A resistor must be chosen to set the maximum operating current for the LM4030 (RZ in Figure 21). The value of the resistor can be calculated using the following equation: RZ = (VIN - VREF)/(IMIN_OPERATING + ILOAD_MAX) (1) RZ is chosen such that the total current flowing through RZ is greater than the maximum load current plus the minimum operating current of the reference itself. This ensures that the reference is never starved for current. Running the LM4030 at higher currents is advantageous for reducing noise. The reverse dynamic impedance of the VREF node scales inversely with the shunted current (see Figure 22) leading to higher rejection of noise emanating from the input supply and from EMI (electro-magnetic interferrence). Figure 22. Reverse Dynamic Impedance vs IOUT The LM4030 is designed to operate with or without a bypass capacitor (COUT in Figure 21) and is stable with capacitors of up to 10 F. The use of a bypass capacitor can improve transient response and reduce broadband noise. Additionally, a bypass capacitor will counter the rising reverse dynamic impedance at higher frequencies improving noise immunity (see Figure 23). Submit Documentation Feedback Copyright (c) 2008-2013, Texas Instruments Incorporated Product Folder Links: LM4030 9 LM4030 SNVS552B - MARCH 2008 - REVISED APRIL 2013 www.ti.com Figure 23. Reverse Dynamic Impedance vs COUT As with other regulators, an external capacitor reduces the amplitude of the VREF transient when a sudden change in loading takes place. The capacitor should be placed as close to the part as possible to reduce the effects of unwanted board parasitics. THERMAL HYSTERESIS Thermal hysteresis is the defined as the change in output voltage at 25C after some deviation from 25C. This is to say that thermal hysteresis is the difference in output voltage between two points in a given temperature profile. An illustrative temperature profile is shown in Figure 24. 125oC VREF1 25oC Time VREF2 -40oC Figure 24. Illustrative Temperature Profile This may be expressed analytically as the following: lVREF1 - VREF2l x 106 ppm VHYS = VREF where * * * * VHYS = Thermal hysteresis expressed in ppm VREF = Nominal preset output voltage VREF1 = VREF before temperature fluctuation VREF2 = VREF after temperature fluctuation (2) The LM4030 features a low thermal hysteresis of 75 ppm (typical) from -40C to 125C after 8 temperature cycles. 10 Submit Documentation Feedback Copyright (c) 2008-2013, Texas Instruments Incorporated Product Folder Links: LM4030 LM4030 www.ti.com SNVS552B - MARCH 2008 - REVISED APRIL 2013 TEMPERATURE COEFFICIENT Temperature drift is defined as the maximum deviation in output voltage over the temperature range. This deviation over temperature may be illustrated as shown in Figure 25. Temperature Change in Output Voltage Voltage VREF_MAX VREF_MIN Temperature Range Figure 25. Illustrative VREF vs Temperature Profile Temperature coefficient may be expressed analytically as the following: (VREF_MAX - VREF_MIN) x 106 ppm TD = VREF x 'T where * * * * * TD = Temperature drift VREF = Nominal preset output voltage VREF_MIN = Minimum output voltage over operating temperature range VREF_MAX = Maximum output voltage over operating temperature range T = Operating temperature range (3) The LM4030 features a low temperature drift of 10ppm (max) to 30ppm (max), depending on the grade. DYNAMIC OFFSET CANCELLATION AND LONG TERM STABILITY Aside from initial accuracy and drift performance, other specifications such as thermal hysteresis and long-term stability can affect the accuracy of a voltage reference, especially over the lifetime of the application. The reference voltage can also shift due to board stress once the part is mounted onto the PCB and during subsequent thermal cycles. Generally, these shifts in VREF arise due to offsets between matched devices within the regulation loop. Both passive and active devices naturally experience drift over time and stress and temperature gradients across the silicon die also generate offset. The LM4030 incorporates a dynamic offset cancellation scheme which compensates for offsets developing within the regulation loop. This gives the LM4030 excellent long-term stability (40 ppm typical) and thermal hysteresis performance (75ppm typical), as well as substantial immunity to PCB stress effects, despite being packaged in a tiny SOT-23. EXPRESSION OF ELECTRICAL CHARACTERISTICS Electrical characteristics are typically expressed in mV, ppm, or a percentage of the nominal value. Depending on the application, one expression may be more useful than the other. To convert one quantity to the other one may apply the following: ppm to mV error in output voltage: VREF x ppmERROR 103 = VERROR where * VREF is in volts (V) and VERROR is in milli-volts (mV) (4) Submit Documentation Feedback Copyright (c) 2008-2013, Texas Instruments Incorporated Product Folder Links: LM4030 11 LM4030 SNVS552B - MARCH 2008 - REVISED APRIL 2013 www.ti.com Bit error (1 bit) to voltage error (mV): VREF x 103 = VERROR n 2 (5) VREF is in volts (V), VERROR is in milli-volts (mV), and n is the number of bits. mV to ppm error in output voltage: VERROR x 103 = ppmERROR VREF where * VREF is in volts (V) and VERROR is in milli-volts (mV) (6) Voltage error (mV) to percentage error (percent): VERROR x 0.1 = Percent_Error VREF where * VREF is in volts (V) and VERROR is in milli-volts (mV) (7) PRINTED CIRCUIT BOARD and LAYOUT CONSIDERATIONS The LM4030 has a very small change in reverse voltage with current (25ppm/mA typical) so large variations in load current (up to 50mA) should not appreciably shift VREF. Parasitic resistance between the LM4030 and the load introduces a voltage drop proportional to load current and should be minimized. The LM4030 should be placed as close to the load it is driving as the layout will allow. The location of RZ is not important, but COUT should be as close to the LM4030 as possible so added ESR does not degrade the transient performance. 12 Submit Documentation Feedback Copyright (c) 2008-2013, Texas Instruments Incorporated Product Folder Links: LM4030 LM4030 www.ti.com SNVS552B - MARCH 2008 - REVISED APRIL 2013 REVISION HISTORY Changes from Revision A (April 2013) to Revision B * Page Changed layout of National Data Sheet to TI format .......................................................................................................... 12 Submit Documentation Feedback Copyright (c) 2008-2013, Texas Instruments Incorporated Product Folder Links: LM4030 13 PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (C) Top-Side Markings (3) (4) LM4030AMF-2.5/NOPB ACTIVE SOT-23 DBV 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 R5JA LM4030AMF-4.096/NOPB ACTIVE SOT-23 DBV 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 R5KA LM4030AMFX-2.5/NOPB ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 R5JA LM4030AMFX4.096/NOPB ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 R5KA LM4030BMF-2.5/NOPB ACTIVE SOT-23 DBV 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 R5JB LM4030BMF-4.096/NOPB ACTIVE SOT-23 DBV 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 R5KB LM4030BMFX-2.5/NOPB ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 R5JB LM4030BMFX4.096/NOPB ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 R5KB LM4030CMF-2.5/NOPB ACTIVE SOT-23 DBV 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 R5JC LM4030CMF-4.096/NOPB ACTIVE SOT-23 DBV 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 R5KC LM4030CMFX-2.5/NOPB ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 R5JC LM4030CMFX4.096/NOPB ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 R5KC (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Top-Side Marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 8-Apr-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ SOT-23 DBV 5 1000 178.0 8.4 LM4030AMF-4.096/NOPB SOT-23 DBV 5 1000 178.0 LM4030AMFX-2.5/NOPB SOT-23 DBV 5 3000 178.0 LM4030AMF-2.5/NOPB Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 3.2 3.2 1.4 4.0 8.0 Q3 8.4 3.2 3.2 1.4 4.0 8.0 Q3 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LM4030AMFX4.096/NOP B SOT-23 DBV 5 3000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LM4030BMF-2.5/NOPB SOT-23 DBV 5 1000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LM4030BMF-4.096/NOPB SOT-23 DBV 5 1000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LM4030BMFX-2.5/NOPB SOT-23 DBV 5 3000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LM4030BMFX4.096/NOP B SOT-23 DBV 5 3000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LM4030CMF-2.5/NOPB SOT-23 DBV 5 1000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LM4030CMF-4.096/NOPB SOT-23 DBV 5 1000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LM4030CMFX-2.5/NOPB SOT-23 DBV 5 3000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 DBV 5 3000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 LM4030CMFX4.096/NOP B SOT-23 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 8-Apr-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM4030AMF-2.5/NOPB SOT-23 DBV 5 1000 210.0 185.0 35.0 LM4030AMF-4.096/NOPB SOT-23 DBV 5 1000 210.0 185.0 35.0 LM4030AMFX-2.5/NOPB SOT-23 DBV 5 3000 210.0 185.0 35.0 LM4030AMFX4.096/NOPB SOT-23 DBV 5 3000 210.0 185.0 35.0 LM4030BMF-2.5/NOPB SOT-23 DBV 5 1000 210.0 185.0 35.0 LM4030BMF-4.096/NOPB SOT-23 DBV 5 1000 210.0 185.0 35.0 LM4030BMFX-2.5/NOPB SOT-23 DBV 5 3000 210.0 185.0 35.0 LM4030BMFX4.096/NOPB SOT-23 DBV 5 3000 210.0 185.0 35.0 LM4030CMF-2.5/NOPB SOT-23 DBV 5 1000 210.0 185.0 35.0 LM4030CMF-4.096/NOPB SOT-23 DBV 5 1000 210.0 185.0 35.0 LM4030CMFX-2.5/NOPB SOT-23 DBV 5 3000 210.0 185.0 35.0 LM4030CMFX4.096/NOPB SOT-23 DBV 5 3000 210.0 185.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2013, Texas Instruments Incorporated