www.vishay.com For technical questions, contact: efi@vishay.com Document Number: 61010
70 Revision: 11-Mar-08
CCC
Vishay Electro-Films
Thin Film, 1010 Center-Tapped Resistors on Alumina
CHIP
RESISTORS
The CCC series resistor chips offer good 400 mW power, low
shunt capacitance and a center tap feature.
The CCCs nichrome resistor material offers excellent stability.
The CCCs are manufactured using Vishay Electro-Films
(EFI) sophisticated thin film equipment and manufacturing
technology.
The CCCs are 100 % electrically tested and visually
inspected to MIL-STD-883.
FEATURES
•Wire bondable
•Larger single size for extended value range
•Resistance range total: 100 Ω to 1 MΩ
Custom values: RA or RB - 50 Ω to 500 kΩ
•Power: 400 mW
•Alumina substrate
•Low stray capacitance: < 0.2 pF
•Resistor material: Nichrome
APPLICATIONS
Vishay EFI CCC chip resistors provide excellent high-frequency response and are ideally suited for prototyping.
Typical application areas are:
•Amplifiers
•Oscillators
•Attenuators
•Couplers
•Filters
Recommended for hermetic environment where die is not exposed to moisture.
Product may not
be to scale
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES AND TOLERANCES
PROCESS CODE
CLASS H* CLASS K*
203 207
200 204
201 205
202 206
*MIL-PRF-38534 inspection criteria
100 Ω200 Ω500 kΩ1 MΩ
0.1 %
Tightest Standard Tolerance Available
± 25 ppm/°C
± 50 ppm/°C
± 100 ppm/°C
± 10 ppm/°C
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Noise, MIL-STD-202, Method 308 - 20 dB typ.
Center Tap Ratio, RA/RB: Tolerance 1 ± 1 %
Stability, 1000 h, + 125 °C, 400 mW ± 0.1 % max. ΔR/R
Operating Temperature Range- 55 °C to + 125 °C
Thermal Shock, MIL-STD-202, Method 107, Test Condition F ± 0.25 % max. ΔR/R
High Temperature Exposure, + 150 °C, 100 h ± 0.25 % max. ΔR/R
Dielectric Voltage Breakdown 400 V
Insulation Resistance 1012 min.
Operating Voltage200 V max.
DC Power Rating at + 125 °C 400 mW max.
5 x Rated Power Short-Time Overload, + 25 °C, 5 s ± 0.25 % max. ΔR/R
Document Number: 61010 For technical questions, contact: efi@vishay.com www.vishay.com
Revision: 11-Mar-08 71
CCC
Thin Film, 1010 Center-Tapped Resistors on
Alumina Vishay Electro-Films
CHIP
RESISTORS
DIMENSIONS in inches
SCHEMATIC
Options: Gold back for solder die attach
Contact Applications Engineer
0.005
0.100
0.100
0.082
0.010 0.010
0.010
R
A
R
B
R
T =
R
A +
R
B
MECHANICAL SPECIFICATIONS in inches
PARAMETER
Chip Size 0.100 x 0.100 ± 0.003 (2.5 x 2.5 ± 0.08 mm)
Chip Thickness 0.010 ± 0.002 (0.25 ± 0.03 mm)
Chip Substrate Material 99.6 % alumina, 2 - 4 microinch finish
Resistor Material Nichrome
Bonding Pad Size 0.005 x 0.010 (0.12 x 0.24 mm) minimum
Number of Pads 6
Pad Material 25 kÅ minimum gold standard
Backing None
ORDERING INFORMATION
Example: 100 % visual, RT = 500 Ω, 50 Ω, ± 10 %, ± 50 ppm/°C TCR, RA = RB = RT/2, gold pads, class H visual inspection
For tighter ratio tolerance, RA, RB or user trim consult factory for P/N.
W
INSPECTION/
PACK AGING
W = 100 % visually inspected
parts
X = Sample, visually inspected
loaded in matrix trays (4 % AQL)
CCC
PRODUCT
FAMILY
201
PROCESS
CODE
See Process Code
table
5000
RESISTANCE
VALUE
Use first 4
significant digits of
resistance
(RT)
A
MULTIPLIER
CODE
B = 0.01
A = 0.1
0 = 1
1 = 10
K
TOLERANCE
CODE
B = 0.1 %
C = 0.25 %
D = 0.5 %
F = 1.0 %
G = 2.0 %
H = 2.5 %
J = 5.0 %
K = 10 %
*Coating standard
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
