Patented*
1N3611GP thru 1N3614GP
and 1N3957GP
Glass Passivated Junction Rectifier
Reverse V oltage 200 to 1000 V
Forward Current 1.0 A
0.107 (2.7)
0.080 (2.0)
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160 (4.1)
DIA.
NOTE:
Lead diameter is for suffix "E" part numbers
0.026 (0.66)
0.023 (0.58)
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
1N 1N 1N 1N 1N
SYMBOLS 3611GP 3612GP 3613GP 3614GP 3957GP UNITS
* Maximum repetitive peak reverse voltage VRRM 200 400 600 800 1000 V
* Maximum RMS voltage VRMS 140 280 420 560 700 V
* Maximum DC blocking voltage VDC 200 400 600 800 1000 A
* Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=75°C IF(AV) 1.0 A
* Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) IFSM 30 A
Typical thermal resistance (NOTE 1) RΘJA 55
RΘJL 25 °C/W
Operating junction and storage temperature range TJ, TSTG -65 to +175 °C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
1N 1N 1N 1N 1N
SYMBOLS 3611GP 3612GP 3613GP 3614GP 3957GP UNITS
Maximum instantaneous forward voltage at 1.0A VF1.0 V
* Maximum DC reverse current TA=25°C 1.0
at rated DC blocking voltage TA=150°C IR300 µA
Typical reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A trr 2.0 µs
Typical junction capacitance at 4.0V, 1MHz CJ8.0 pF
NOTES:
(1) Thermal resistance from junction to ambient and from junction to lead at 0.375” (9.5mm) lead length, P.C.B. mounted
*JEDEC registered values
DO-204AL (DO-41)
1/17/00
Features
• Plastic package has Underwriters Laboratories
Flammability Classification 94V-0
• High temperature metallurgically bonded construction
• Capable of meeting environmental standards of
MIL-S-19500
• Cavity-free glass passivated junction
• 1.0 Ampere operation at TA=75°C with no thermal
runaway
• Typical IRless than 0.1µA
• High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
Mechanical Data
Case: JEDEC DO-204AL, molded plastic over glass body
Terminals: Plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.012 ounce, 0.3 gram
®
Dimensions in inches and (millimeters)
*
Glass-plastic encapsulation technique is covered by
Patent No. 3,996,602, and brazed-lead assembly by Patent No. 3,930,306
1.0
110
5.0
10
20
25
050 100 150
0
0.2
0.4
0.6
0.8
30
15
100
1.0 1.2 1.6
0.01
20
1
10
0.1
1.4
0.8
0.6
25 75 125 175
100
10
20
10.1 110
60 80 100
0.01
0.1
1
10
40
20
0
0.01 0.1 110 100
0.1
1
10
100
FIG. 1 - MAXIMUM FORWARD CURRENT DERATING
AMBIENT TEMPERATURE, °C
AVERAGE FORWARD RECTIFIED CURRENT,
AMPERES
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
NUMBER OF CYCLES AT 60 HZ
PEAK FORWARD SURGE CURRENT,
AMPERES
FIG. 3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
INSTANTANEOUS FORWARD CURRENT,
AMPERES
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
JUNCTION CAPACITANCE, pF
REVERSE VOLTAGE, VOLTS
TJ=TJmax.
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
TJ=100°C
TJ=25°C
TJ=25°C
PULSE WIDTH=300µs
1% DUTY CYCLE
TJ=25°C
f=1.0 MHZ
Vsig=50mVp-p
0.375" (9.5mm) LEAD LENGTH
60 HZ
RESISTIVE OR
INDUCTIVE LOAD
FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE
TRANSIENT THERMAL IMPEDANCE (°C/W)
t, PULSE DURATION, sec
1N3611GP THRU 1N3614GP
AND 1N3957
Ratings and Characteristic Curves(TA= 25°C unless otherwise noted)
