MP-GUIDE-18 - AMPHENOL - Product.Live

123

ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888www.amphenolaudio.com

Multipin Connectors

MULTIPIN

CONNECTORS

Features / Options

- MP-62 Series

- 39 or 61 Solder bucket contacts

- Gold plated contacts

- Neoprene inserts

- Environmental resistant

- Positive Bayonet locking

- PG cable gland or NPT thread

- Metal Housings

Ordering Codes

We have listed the more common ordering

codes in each section. For further options

please contact us.

Amphenol has an extensive range of circular

and rectangular multi-pin connectors ideally

suited to the entertainment industry.

Featuring rugged housings and precision

made contacts these connectors have

proven themselves in the most demanding

of applications. The extensive arrangement

of different connector sizes and contact

numbers ensure we can offer a solution to

your multi-pin wiring applications.

Applications

• Audio Cables and Snakes

• Lighting control

• Concert Touring Systems

• Outside Broadcast Systems

Features / Options

- MP-41 Series

• 13 to 85 pins with Crimp / Solder bucket

contacts

• 150 pins with Crimp contacts only

• 4 to 48 channel

• Gold plated contacts

• Synthetic inserts

• Environmental resistant

• Positive Bayonet locking

• PG cable gland

• 2000 mating cycles

• Bayonet wear pins

• Extended coupling ring

• Metal Housings

Simple steps to guide you

in using this catalogue

1) Identify the product group listed in

Contents on page 1 and go directly to

that page number.

2) Each product group cover page then details

information and options available.

3) Refer to the product detail pages and identify

the product you require pictorially.

4) Read the product description column for the

products standard features.

5) Use pins column to determine number

of contacts.

6) Identify part number.

7) In the event the particular option you require

is not listed please refer to the part number

breakdown page at the end of each section.

8) Please contact us directly if you have any

further problems.

ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888

124

www.amphenolaudio.com

Multipin Connectors

MP-41 Series

Amphenol’s MP-41 series of multipin connectors utilise the same design

principals of the rugged Mil-C-5015 military connectors. They can withstand

high shock and vibration environments and are ideal for tough on-road

applications. Featuring a quick mating bayonet coupling with an audible full

mating feature ensures a positive connection every time. Available from

13 to 150 pins with contacts supplied with each connector as standard.

Features:

• 13 to 85 pins with Crimp/Solder • Industry standard compatible

bucket contacts • 2000 mating cycles

• 150 pins with Crimp contacts only • Black finish

• 4 to 48 channels • Positive bayonet locking

• Gold plated contacts • PG cable glands

• Synthetic insert • IP67 rated

• Protective dust caps • Metal housings

Options: NPT threaded backshells. Crimp Tooling: Page 127

Specifications: Page 128 Part Number Breakdown: Page 127

Wiring Information: Page 141

PART NUMBER

PINS PART NUMBER

PRODUCT - FIGURE DRAWING

Dimensions in mm (inches)

Straight cable plug with socket

contacts, Black finish, supplied

complete with contacts.

Cable connecting receptacle with

pin contacts, black finish, supplied

complete with contacts.

Dimensions in mm (inches)

A B PG

40.5 160

(1.60) (6.30) 11 13 MP-4106-13S

44 171

(1.73) (6.73) 13.5 19 MP-4106-19S

46.6 193

(1.83) (7.60) 16 25 MP-4106-25S

54.3 210

(2.14) (8.26) 21 37 MP-4106-37S

60.1 210

(2.36) (8.26) 21 54 MP-4106-54S

73.3 137

(2.88) (5.40) 29 85 MP-4106-85S

73.3 145

(2.88) (5.70) 36 150 MP-4106-150S

37.8 160

(1.49) (6.30) 11 13 MP-4101-13P

41.1 171

(1.62) (6.73) 13.5 19 MP-4101-19P

41.5 193

(1.63) (7.60) 16 25 MP-4101-25P

51 210

(2.00) (8.26) 21 37 MP-4101-37P

57.1 210

(2.25) (8.26) 21 54 MP-4101-54P

70 137

(2.75) (5.40) 29 85 MP-4101-85P

70 145

(2.75) (5.70) 36 150 MP-4101-150P

Note: NPT threaded backshells available on request. Please contact us.

MP-4106-13S-C

MP-4106-19S-C

MP-4106-25S-C

MP-4106-37S-C

MP-4106-54S-C

MP-4106-85S-C

MP-4106-150S-C

MP-4101-13P-C

MP-4101-19P-C

MP-4101-25P-C

MP-4101-37P-C

MP-4101-54P-C

MP-4101-85P-C

MP-4101-150P-C

With Dustcap

MP-41 Series

125

ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888www.amphenolaudio.com

Multipin Connectors

PART NUMBER

PINS PART NUMBER

38 29.4 3.2 40.5 38.8

(1.49) (1.15) (0.13) (1.60) (1.53) N/A 13 MP-4164-13S

41 31.8 3.2 44 38.8

(1.61) (1.25) (0.13) (1.73) (1.53) N/A 19 MP-4164-19S

44.5 34.9 3.73 48.51 40.6

(1.75) (1.37) (0.14) (1.91) (1.60) N/A 25 MP-4164-25S

50.8 39.7 3.73 54.3 42

(1.99) (1.56) (0.14) (2.14) (1.65) N/A 37 MP-4164-37S

57 44.5 4.39 60.8 45

(2.24) (1.75) (0.17) (2.40) (1.77) N/A 54 MP-4164-54S

69.8 55.5 4.39 73.3 45

(2.74) (2.18) (0.17) (2.88) (1.77) N/A 85 MP-4164-85S

69.8 55.5 4.39 73.3 45

(2.74) (2.18) (0.17) (2.88) (1.77) N/A 150 MP-4164-150S

38 29.4 3.23 34.2 34.5 29

(1.49) (1.15) (0.13) (1.34) (1.35) (1.14) 13 MP-4102-13P

41 31.8 3.23 37.4 34.5 32.2

(1.61) (1.25) (0.13) (1.47) (1.35) (1.26) 19 MP-4102-19P

44.5 34.9 3.73 40.9 35.7 35.3

(1.75) (1.37) (0.14) (1.61) (1.40) (1.38) 25 MP-4102-25P

50.8 39.7 3.73 46.7 36.5 41.4

(1.99) (1.56) (0.14) (1.83) (1.44) (1.62) 37 MP-4102-37P

57 44.5 4.30 53.4 38.5 47.8

(2.24) (1.75) (0.17) (2.10) (1.52) (1.88) 54 MP-4102-54P

69.8 55.5 4.30 65.5 38.5 59

(2.74) (2.18) (0.17) (2.57) (1.52) (2.32) 85 MP-4102-85P

69.8 55.5 4.30 65.5 38.5 59

(2.74) (2.18) (0.17) (2.57) (1.52) (2.32) 150 MP-4102-150P

34.16 31.5 110 4.7

(1.35) (1.24) (4.33) (0.18) - - 13 MP-25042-13S

37.36 31.5 110 4.7

(1.47) (1.24) (4.33) (0.18) - - 19 MP-25042-19S

40.87 31.5 110 4.7

(1.61) (1.24) (4.33) (0.18) - - 25 MP-25042-25S

46.68 31.5 110 4.7

(1.84) (1.24) (4.33) (0.18) - - 37 MP-25042-37S

53.36 31.5 110 5.5

(2.10) (1.24) (4.33) (0.22) - - 54 MP-25042-54S

65.48 31.5 110 5.5

(2.58) (1.24) (4.33) (0.22) - - 85 MP-25042-85S

65.48 31.5 110 5.5

(2.58) (1.24) (4.33) (0.22) - - 150 MP-25042-150S

38.8 20.7 255

(1.53) (0.81) (8.07) - - - 13 MP-25042-13L

41.6 20.7 255

(1.64) (0.81) (8.07) - - - 19 MP-25042-19L

45.3 20.7 255

(1.78) (0.81) (8.07) - - - 25 MP-25042-25L

52.15 20.7 255

(2.05) (0.81) (8.07) - - - 37 MP-25042-37L

58.6 20.7 255

(2.30) (0.81) (8.07) - - - 54 MP-25042-54L

70.7 20.7 255

(2.78) (0.81) (8.07) - - - 85 MP-25042-85L

70.7 20.7 255

(2.78) (0.81) (8.07) - - - 150 MP-25042-150L

Dimensions in mm (inches)

A B C D E F

PRODUCT - FIGURE DRAWING

Dimensions in mm (inches)

With Dustcap

Panel plug with socket contacts,

black finish, supplied complete

with contacts.

Panel receptacle with pin contacts,

black finish, supplied complete with

contacts.

Plug protective dustcap to suit MP-

4164 type.

Receptacle protective dustcap to

suit MP-4106 types.

MP-4164-13S-C

MP-4164-19S-C

MP-4164-25S-C

MP-4164-37S-C

MP-4164-54S-C

MP-4164-85S-C

MP-4164-150S-C

MP-4102-13P-C

MP-4102-19P-C

MP-4102-25P-C

MP-4102-37P-C

MP-4102-54P-C

MP-4102-85P-C

MP-4102-150P-C

MP-41 Series

ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888

126

www.amphenolaudio.com

Multipin Connectors

PINS PART NUMBER

34.16 31.5 110 4.7

(1.35) (1.24) (4.33) (0.18) - - 13 MP-25043-13S

37.36 31.5 110 4.7

(1.47) (1.24) (4.33) (0.18) - - 19 MP-25043-19S

40.87 31.5 110 4.7

(1.61) (1.24) (4.33) (0.18) - - 25 MP-25043-25S

46.68 31.5 110 4.7

(1.84) (1.24) (4.33) (0.18) - - 37 MP-25043-37S

53.36 31.5 110 5.5

(2.10) (1.24) (4.33) (0.22) - - 54 MP-25043-54S

65.48 31.5 110 5.5

(2.58) (1.24) (4.33) (0.22) - - 85 MP-25043-85S

65.48 31.5 110 5.5

(2.58) (1.24) (4.33) (0.22) - - 150 MP-25043-150S

38.8 20.7 255

(1.53) (0.81) (8.07) - - - 13 MP-25043-13L

41.6 20.7 255

(1.64) (0.81) (8.07) - - - 19 MP-25043-19L

45.3 20.7 255

(1.78) (0.81) (8.07) - - - 25 MP-25043-25L

52.15 20.7 255

(2.05) (0.81) (8.07) - - - 37 MP-25043-37L

58.6 20.7 255

(2.30) (0.81) (8.07) - - - 54 MP-25043-54L

70.7 20.7 255

(2.78) (0.81) (8.07) - - - 85 MP-25043-85L

70.7 20.7 255

(2.78) (0.81) (8.07) - - 150 MP-25043-150L

Dimensions in mm (inches)

A B C D E F

PRODUCT - FIGURE DRAWING

Dimensions in mm (inches)

Plug protective dustcap to suit MP-

4102 types.

Receptacle protective dustcap to

suit MP-4101 types.

MP-41 Series

127

ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888www.amphenolaudio.com

Multipin Connectors

Solder/Crimp Socket Contact

PRODUCT - FIGURE DRAWING DESCRIPTION NO. OF PINS PART NUMBER

All M22520/1-01

Crimp Tool

NOTE: Complete instructions for providing reliable crimped wire to contact terminations and inserting proprietary contacts in MP-41 Series

connectors are available in publication Pi523 located on our website www.amphenolaudio.com.

MP-GUIDE-16

13-85

MP-108300

150 (Size 18)

MP-108500

150 (Size 18)

All TH29-1

MP-INS-16

MP-EXT-16/18

Positioner / Turret

13-85

Insertion tool

Extraction tool All

Contact Pilot Pin

MP-108400

Solder/Crimp Pin Contact 13-85 (Size 16)

MP-108600

N/A

13-85 (Size 16)

Crimp Pin Contact

(Soldering of this contact is not recommended)

Crimp Socket Contact

(Soldering of this contact is not recommended)

MP-INS-18

150

MP-GUIDE-18

150

MULTIPIN CIRCULAR CONNECTORS

PART NUMBER BREAKDOWN MP-41 SERIES

E. G . MP-4106-85S

Multipin, 4106 Cable Plug, 85 Contacts, S Female Socket Contacts,

MP Series Prefix

SERIES PREFIX

HOUSING TYPE

4101 Inline cable connecting receptacle

4102 Panel receptacle

4106 Cable plug

4164 Panel plug

25042S Dustcap for panel plug

25043S Dustcap for panel receptacle

25042L Dustcap for cable plug

25043L Dustcap for cable receptacle

SERIES PREFIX

MP 4106

HOUSING TYPE

NUMBER OF CONTACTS

*GENDER

OPTIONS

-85 S C

GENDER

*Not required for dustcap

part numbers

OPTIONS

P Male pin contacts

S Female socket contacts

C Supplied with Dustcap

13, 19, 25, 37, 54, 85, 150

NO. OF CONTACTS

MP-41 Series

ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888

128

www.amphenolaudio.com

Multipin Connectors

Number of contacts

Number of channels

Termination

4 6 8 12 16 28 48

13 19 25 37 54 85 150

Wire Gauge - Stranded Wire 18AWG

Operating Voltage at Sea level - DC

Operating Voltage at Sea level - AC

16AWG - 20AWG

Test Voltage AC RMS 1000V

1000V

Current Carrying Capacity 7.5A

13A

Typical Contact Resistance 11.25mΩ

3.46mΩ

Insulation Resistance

Protection Class

Operating Temperature

IP67 (when mated)

-55°C to +125°C (-67°F to +257°F)

200V*

250V* 250V*

200V*

Solder / Crimp “Combo”

ELECTRICAL

CHARACTERISTICS

CLIMATIC

CHARACTERISTICS

Cable Retention

Mechanical Operations 2000 mating cycles

PG Gland

MECHANICAL

CHARACTERISTICS

Connector / Shell Finish Aluminium Alloy / Black

Insert

MATERIALS

Male pin contact / Plating

Female socket contact / Plating

Synthetic Insert to MIL-R-3065

Brass / Gold plated

PG Gland

Cable Clamping range mm

(inches)

CLAMPING

CHARACTERISTICS

11 13.5 16 29

4-10 5-12 9-14 13-18 14-25 19-32

(0.15”-

0.39”)

(0.19”-

0.47”)

(0.35”-

0.55”)

(0.51”- 0.70”) (0.55”-

0.98”)

(0.74”-

1.25”)

21 36

5000MΩ

STANDARD DATA MP-41 SERIES

GENERAL

CHARACTERISTICS

VALUE

Not suitable for domestic applications above 50V

Rev 2 - 03/2013

Environmental Complies with EU RoHS 2 Directive 2011/65/EU

Crimp

MP-41 Series

129

ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888www.amphenolaudio.com

Multipin Connectors

PRODUCT - FIGURE DRAWING PINS PART NUMBER PART NUMBER

Straight cable plug with pin contacts,

Black finish, Gold plated solder contacts.

Straight cable plug with pin contacts, NPT 3/4”

threaded backshell, Black finish, Gold plated

solder contacts.

Cable connecting receptacle with socket contacts,

Black finish, Gold plated solder contacts.

Cable connecting receptacle with socket contacts,

NPT 3/4” threaded backshell, Black finish,

Gold plated solder contacts.

MP-62 / MP-65 Series

Amphenol’s Multipin MP-62 series of circular connectors utilise the

same design principles as the Mil-C-26482 military connectors.

Featuring a three point quick mating bayonet coupling and five key

polarisation ensuring a positive connection every time. Available in two

contact pin layouts 39 and 61 with gold plated solder contacts fitted

as standard.

Features:

• 39 or 61 pins. • Environmental resistant.

• Gold plated solder contacts. • Black finish.

• Neoprene insert. • Positive bayonet locking

• Protective dust caps • PG cable glands

• Metal housings

Specifications: Page 131 Wiring Info: Page 141

Dimensions in mm (inches)

38.9 181.5 16 39

(1.53) (7.15) MP-6216-39P MP-6216-39P-C

45.5 193 21 61

(1.80) (7.60) MP-6216-61P MP-6216-61P-C

36.7 181.5 16 39

(1.45) (7.15) MP-6211-39S MP-6211-39S-C

43.0 193 21 61

(1.70) (7.60) MP-6211-61S MP-6211-61S-C

38.9 90 NPT 39

(1.53) (3.54) 3/4” MP-6516-39P MP-6516-39P-C

45.5 100 NPT 61

(1.80) (3.94) 3/4” MP-6516-61P MP-6516-61P-C

36.7 90 NPT 39

(1.45) (3.54) 3/4” MP-6511-39S MP-6511-39S-C

43.0 100 NPT 61

(1.70) (3.94) 3/4” MP-6511-61S MP-6511-61S-C

A B PG

Dimensions in mm (inches)

With Dustcap

MP-62 / MP-65 Series

ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888

130

www.amphenolaudio.com

Multipin Connectors

Plug protective dustcap

to suit MP-6256

Plug protective dustcap

to suit MP-6212

Receptacle protective

dustcap to suit MP-6216

Receptacle protective

dustcap to suit MP-6211

PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION PINS PART NUMBER

39 MP-742-39S

61 MP-742-61S

39 MP-742-39L

61 MP-742-61L

39 MP-738-39S

61 MP-738-61S

39 MP-738-39L

61 MP-738-61L

Dimensions in mm (inches)

A B C

31.7 15.9 127 4.40

(1.25) (0.62) (4.99) (0.17)

38.05 16.70 127 4.40

(1.50) (0.66) (4.99) (0.17)

36.9 13.13 127 -

(1.45) (0.52) (4.99)

43.14 14.15 127 -

(1.70) (0.56) (4.99)

31.7 15.9 127 4.40

(1.25) (0.62) (4.99) (0.17)

38.05 16.70 127 4.40

(1.50) (0.66) (4.99) (0.17)

36.9 13.13 127 -

(1.45) (0.52) (4.99)

43.14 14.15 127 -

(1.70) (0.56) (4.99)

DRAWING

Panel plug with pin contacts, Black fin-

ish, Gold plated solder contacts.

Panel receptacle plug with socket contacts,

Black finish, Gold plated solder contacts.

PINS

Dimensions in mm (inches)

A B C D E F

38.86 29.36 6-32 39.0 32 -

(1.53) (1.16) (1.54) (1.26) - 39 MP-6256-39P MP-6256-39P-C

43.94 34.93 6-32 45.5 35 -

(1.73) (1.38) (1.80) (1.38) - 61 MP-6256-61P MP-6256-61P-C

36.7 29.36 3.05 31.8 22.3 30.1

(1.44) (1.15) (0.12) (1.25) (0.87) (1.18) 39 MP-6212-39S MP-6212-39S-C

43.0 34.93 3.74 38.1 22.3 36.4

(1.69) (1.38) (0.15) (1.50) (0.87) (1.43) 61 MP-6212-61S MP-6212-61S-C

UNC

Dimensions in mm (inches)

PRODUCT - FIGURE PART

NUMBER PART NUMBER

With Dustcap

Recommended Fastener (Page Marker)

MP-62 / MP-65 Series

131

ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888www.amphenolaudio.com

Multipin Connectors

Environmental Complies with EU RoHS 2 Directive 2011/65/EU

Operating Voltage at Sea level - DC

Operating Voltage at Sea level - AC

Test Voltage AC RMS

Current Carrying Capacity

Insulation Resistance

Protection Class

Operating Temperature

IP67 (when mated)

5000MΩ

-55°C to +125°C (-67°F to +257°F)

600V*

1500V

ELECTRICAL

CHARACTERISTICS

CLIMATIC

CHARACTERISTICS

Cable Retention

Mechanical Operations 500 mating cycles (minimum)

PG Gland / NPT Thread

MECHANICAL

CHARACTERISTICS

Connector / Shell Finish Aluminium Alloy / Black

Insert

MATERIALS

Male pin contact machined - Plating

Female socket contact machined - Plating

Neoprene

Brass / Gold plated

9-14 (0.35”-0.55”)

PG Gland

Cable Clamping range mm (inches)

CLAMPING

CHARACTERISTICS

STANDARD DATA MP-62 SERIES / MP - 65 SERIES

GENERAL

CHARACTERISTICS

Number of contacts

Number of channels

Termination

39 61

12 20

24AWG-20AWG

Wire Gauge - Stranded Wire

Solder

37 x 24AWG-20AWG

2 x 20AWG-16AWG

7.5A37 x 7.5A

2 x 13A

VALUE

Not suitable for domestic applications above 50V

Rev 3 - 03/2013

16 21

13-18 (0.51”-0.70”)

146 SERIES RECTANGULAR CONNECTORS

Amphenol Tuchel C146 series rectangular connectors feature modular

components ensuring a vast range of different features and benefits for the end

user. The zinc diecast aluminum housings are finished in a durable powder coat

and available in either top or side entry. Connector coupling is achieved via a

positive locking lever ensuring a positive rapid connection. The C146 series is

suitable for general-purpose audio and lighting applications and is completely

intermateable with all competitor connectors.

FIBRE OPTIC

Amphenol has over 25 years experience in fibre optics dating back to their

development of the first industry standard connector, the SMA. Today we can

offer a complete range of products including Hybrid Fibre optic connectors for

HDTV broadcast cameras SMPTE 304M compliant and ruggedised connectors

and cable assemblies for indoor or outdoor applications.

MP-62 / MP-65 Series

141

ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888www.amphenolaudio.com

PRODUCT SAFETY INFORMATION

This should be read in conjunction with

Data Sheet information contained in

individual product brochures. Failure to

observe the advice in this information

sheet and the operating conditions

specified in the Data Sheets could

result in hazardous situations.

1. Material Content and

Physical Form

Electrical connectors do not usually

contain hazardous materials.

They contain conducting and

non-conducting materials. Shells are

manufactured in metal and plastic.

Insulators can be formed in either

natural rubber, synthetic rubber,

plastic or glass insulating materials.

Contact materials vary with the type

of connector and its application. They

are usually manufactured from either

copper alloys, nickel, alumel, chromel

or steel. In special applications, other

alloys may be specified.

2. Fire Characteristics and Electric

Shock Hazard

There is no fire hazard when the

connector is correctly wired and

used within the specified parameters.

Incorrect wiring or assembly of the

connector or careless use of metal

tools or conductive fluids, or transit

damage to any of the component parts

may cause electric shock or burns.

Live circuits must not be broken by

separating mated connectors as this

may cause arcing, ionisation and

burning. Heat dissipation is greater at

maximum resistance in a circuit. Hot

spots may occur when resistance is

raised locally by damage, e.g. cracked

or deformed contacts, or broken

strands of wire. Local overheating

may also result from the use of the

incorrect application tools or from

poor quality soldering.

Overheating may occur if the ratings in

the Data Sheets are exceeded and can

cause breakdown of insulation and

hence electric shock.

If heating is allowed to continue

it intensifies by further increasing

the local resistance through loss of

temper or spring contact, formation

of oxide film on contacts and wires,

and leakage currents through

carbonisation of insulation and

tracking points. Fire can then result in

the presence of combustible materials

and this may release noxious fumes.

Overheating may not be visually

apparent. Burns may result from

touching overheated components.

3. Handling

Care must be taken to avoid damage

to any component parts of electrical

connectors during installation and

use. Although there are normally no

sharp edges, care must be taken

when handling certain components

to avoid injury to fingers. Electrical

connectors may be damaged in

transit to customers, and damage may

result in creation of hazards. Products

should therefore be examined prior to

installation/use and rejected if found to

be damaged.

4. Disposal

Incineration of certain materials may

release noxious or even toxic fumes.

5. Application

Connectors with exposed contacts

should not be selected for use on the

current supply side of an electrical

circuit, because an electric shock

could result from touching exposed

contacts of an unmated connector.

Voltages in excess of 30 V.A.C. or 42.5

V.D.C. are potentially hazardous and

care should be taken to ensure that

such voltages cannot be transmitted

in any way to exposed metal parts of

the connector body. The connector

and wiring should be checked, before

making live, to have no damage to

metal parts or insulators, no solder

blobs, loose strands, conducting

lubricants, swarf, or any other

undesired conducting particles.

Circuit resistance and continuity check

should be made to make certain that

there are no low resistance joints or

spurious conducting paths. Always

use the correct application tools as

specified in the Data Sheets. Do not

permit untrained personnel to wire,

assemble or tamper with connectors.

For operation voltage please see

appropriate national regulations.

Important General Information

A) Air and creepage paths /

Operating voltage.

The admissible operating voltages

depend on the individual applications

and the valid national and other

applicable safety regulations. For this

reason the air and creepage path data

are only reference values. Observe

reduction of air and creepage paths

due to PC board and/or harnessing.

B) Other important information

Amphenol Australia Pty Ltd

continuously endeavours to improve

its products. Therefore, products

may deviate from the description,

technical data and shape as shown

in product brochures.

C) Assembly instructions

If applicable, special assembly

instructions have been included

in or on the connector packaging.