For technical questions, contact: powertron@vishaypg.com
CMF Series
Powertron
Document Number: 64304
Revision: 20-09-10
www.powertron.de
1
Type 0603 0805 1206
Power Rating ( W )10.065 0.125 0.25
Working Voltage
( VAC ) 75 100 200
Resistance Range
( W )
Tolerances Available ( % )
Temperature Coefcients Available ( ± ppm/K ) 2
5.1W - <10W- - 1%
50
10W - <47W0.1% to 1%
25 / 50
0.1% to 1%
25 / 50
0.1% to 1%
25 / 50
47W - <100W0.1% to 1%
10 / 15 / 25 / 50
0.1% to 1%
10 / 15 / 25 / 50
0.1% to 1%
10 / 15 / 25 / 50
100W - 332k 0.1% to 1%
5 / 10 / 15 / 25 / 50
0.05% to 1%
5 / 10 / 15 / 25 / 50
0.05% to 1%
5 / 10 / 15 / 25 / 50
>332k - 1M -0.1% to 1%
10 / 15 / 25 / 50
0.05% to 1%
10 / 15 / 25 / 50
>1M - 2M - - 0.25% to 1%
50
>2M - 10M - - -
Resistances from 5.1Ohm to 10MOhms•
Power Rating 0.065 to 0.25 Watts•
Resistance Tolerances to ± 0.05%•
TCR’s to ± 5 ppm/K•
Extreme Low Noise•
Precision / Thin Film Resistance Element•
Sizes: 0603 / 0805 / 1206 / 1210 / 2512•
SPECIFICATIONS
1 W @ 70 °C / 0W @ 125 °C
2 5 / 10 / 15 PPM : +25 °C to +85 °C
3 1000V Available / contact factory
For technical questions, contact: powertron@vishaypg.com
CMF Series
Powertron
Document Number: 64304
Revision: 20-09-10
www.powertron.de
2
Specication Value
Temperature Range -55°C to +125°C
Climactic Cetegory 55 / 125 / 56
Solderability 250°C / 3s
Max. Soldering Temperature 260°C / 10s
Long Term Stability Max DR
< 47W47W - 10 MW
Storage 125°C / 1000h ±0.25% ±0.15%
Load Life / P=70% / 70°C / 1000h ±0.25% ±0.1%
Humidity / 96%RH / 40°C / 56 days ±0.5% ±0.15%
0 25 50 75 100 125 150 175
0
20
40
60
80
100
120
Power ( % )
Ambient Temperature (°C)
Power Derating Curve
Type
Dimensions
L B D C
CMF 0603 0.063 ±0.004
[ 1.6 ±0.1 ]
0.030 ±0.004
[ 0.8 ±0.1 ]
0.018 ±0.004
[ 0.45 ±0.1 ]
0.012 ±0.008
[ 0.3 ±0.2 ]
CMF 0805 0.080 ±0.004
[ 2.0 ±0.1 ]
0.050 ±0.004
[ 1.25 ±0.1 ]
0.022 ±0.004
[ 0.55 ±0.1 ]
0.016 ±0.008
[ 0.4 ±0.2 ]
CMF 1206 0.126 ±0.008
[ 3.2 ±0.2 ]
0.063 ±0.006
[ 1.6 ±0.15 ]
0.022 ±0.004
[ 0.55 ±0.1 ]
0.020 ±0.008
[ 0.5 ±0.2 ]
Packaging:
Bulk or Blistertape to IEC 60286-3
Tape width 8mm / Reel Diameter 180 or 330mm
Minimum quantity Bulk / 100 pieces per value
Minimum quantity Tape & Reel / 1000 pieces per value
SPECIFICATIONS (continued)
Ordering Information
Part Number - Resistance - Tolerance - TCR - Packaging
Example: CMF 0603 10 kOhms 0.1% 10ppm Tape
( Note: if no TCR is Specied / The highest value will be supplied )
Vishay Precision Group
Document No.: 63999
Revision: 27-Apr-11
www.vishaypg.com
1
Legal Disclaimer Notice
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their
behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained herein or in any other disclosure relating to any product.
The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and conditions of
purchase, including but not limited to, the warranty expressed therein.
Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms
and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group
disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability,
including without limitation special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications
and performance may vary over time. Statements regarding the suitability of products for certain types of
applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on
Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the
properties described in the product specification is suitable for use in a particular application.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by
any conduct of Vishay Precision Group.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use
in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any
damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel
to obtain written terms and conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Legal Disclaimer Notice
Disclaimer
Document No.: 63999
Revision: 27-Apr-11