44.5
3
15 20
23
2.2
PRE-LOAD
POSITION
0.65
SOCKET
RECESS
5.46
5.46
For further information on your individual application requirements, contact: Amphenol Corporation
North America:
Amphenol Industrial Operations
180 N. Freeport Drive, Plant 4
Nogales, AZ 85621
Tel: (888) 364-9011
Fax: (520) 285-5134
Email: tech@amphenol-aio.com
Europe:
Amphenol Industrial Operations Europe
Via Barbaiana 5
1-20020 Lainate (MI) Italy
Tel: +39 02 93254.204
Fax: +39 02 93254.444
Email: info@amphenol-aio.com
Middle East:
Amphenol Middle East Enterprises FZE
Ofce C-37 PO Box 21107
Ajman Free Zone, UAE
Tel: +9 716-7422494
Fax: +9 716-7422941
Email: jhussain@amphenol-industrial.com
Asia:
Amphenol Technology (Zhuhai) Co., Ltd.
No. 63 Xin Han Road, San Zao Town
Jin Wan District, Zhuhai City, China 519040
Tel: +86 756-3989760
Fax: +86 756-3989768
Email: enquiry@amphenol-aio.com
Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented
without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not
recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors.
* Socket Contacts are on reels of 4,200 pieces and pin contacts are on reels of 4000 pieces
* For Crimp Information please contact factory
* Cable seals are sold separately and must be used in all
cavities and on both sides of the connection system
For additional information on the Amphe-Power family of connectors with RADSOK®
Technology, please ask for our RADSOK® Catalog (SL-391) or download it from the Catalogs
section of our website.
Material Specification
Plug with RADSOK®Socket Contacts
Plug Body Nylon
Wire Seal Silicone
Main Joint Seal Fluoroelastomer
Socket Contact Copper Alloy w/ Stainless Steel Hood
Receptacle with Pin Contacts
Receptacle Body Nylon
Pin Contact Copper Alloy
Electrical Specifications
Dielectric Withstanding Voltage (Test Voltage) 1600 Vac RMS
Current Rating 13 amp (DC) (16 AWG Cable)
Insulation Resistance 100 M Ohms
AIPG Part Number Description Additional Information
10-838275-000 2way Plug (Plug Body, Locking Collar, and Main Joint Seal) 125°C
10-838275-002 2way Plug (Plug Body, Locking Collar, and Main Joint Seal) 150°C
10-707003-002 4way Plug (Plug Body, Locking Collar, and Main Joint Seal) 150°C
10-707508-02X(X: A,B,C,D) 6way Plug (Plug Body, Locking Collar, and Main Joint Seal) 4 indexes available, 150°C
10-707516-001 2way receptacle 150°C
10-707517-001 4way receptacle 150°C
10-707509-00X(X: A,B,C,D) 6way receptacle 4 indexes available, 150°C
10-838137-00D Wire seal (silicone) To be used with insulated wires
with insulation between 1.8-2.5 mm
10-838137-01D Wire seal (silicone) To be used with insulated wires
with insulation between 1.2-1.8 mm
10-730605-002 Stamped and formed female socket, Au+PdNi plating Crimps to wire from 0.8-1.3 sq. mm
10-707515-002 Stamped and formed male pin, Au+ PdNi plating Crimps to wire from 0.8-1.3 sq. mm
10-707515-0M2 Machined male pin, Au+PaNi plating Crimps to wire from 0.8-1.3 sq. mm
10-730179-002 Stamped and formed female socket, Au+PdNi plating Crimps to wire from 0.5-0.8 sq. mm
10-730764-002 Stamped and formed male pin, Au+ PdNi plating Crimps to wire from 0.5-0.8 sq. mm
C10-708354-000 Size 20 AWG hand crimp tool
C10-730690-000 Size 16-18 AWG hand crimp tool
Mechanical Specifications
Connector Mating Force <70 N (15.7 lb)
Contact Retention Primary Only: 80 N (18.0 lb)
Secondary Only: 60 N (13.5 lb)
Vibration 32 g RMS
Operating Temperature Range -40°/+125°C or +150°C depending on PN;
100 cycles, 1 hour per cycle
Ingress Protection IP67
Durability (Mating Cycle) 20 cycles
®
For further information on your individual application requirements, contact: Amphenol Corporation
North America:
Amphenol Industrial Operations
180 N. Freeport Drive, Plant 4
Nogales, AZ 85621
Tel: (520) 285-5130
Fax: (520) 285-5134
Email: tech@amphenol-aio.com
Europe:
Amphenol Industrial Operations Europe
Via Barbaiana 5
1-20020 Lainate (MI) Italy
Tel: +39 02 93254.204
Fax: +39 02 93254.444
Email: info@amphenol-aio.com
Middle East:
Amphenol Middle East Enterprises FZE
Office C-37 PO Box 21107
Ajman Free Zone, UAE
Tel: +9 716-7422494
Fax: +9 716-7422941
Email: jhussain@amphenol-industrial.com
Asia:
Amphenol Technology Shenzhen Ltd
Block 5 Fuan 2nd Industrial Park
Dayang Rd, Fuyong Baoan
Baoan, Shenzhen, China 518103
Tel: +86 755 2881 8389
Fax: +86 755 2991 8310
Email: enquiry@amphenol-aio.com
IDS-16-4 Tru-loc_10-23-14:Layout 1 1/16/15 11:25 AM Page 2
For additional information on Amphenol’s family of Tru-Loc products, please ask for our Tru-Loc data sheet (IDS-16) or
download it from our website in the Data Sheets section.
Plug
6 Way Tru-Loc Plug
Receptacle
Tru-Loc Splitter Receptacle for 6 Way Plugs
2.8
5.4
5.5
6 Places
1.3
6 Places
PORT 1
WIRE GROMMETS
120 Omh x 0.4
Watt Resister
Part Number Description
C10-708354-000
C10-708360-000
C10-708305-000
C10-708353-000
C10-729337-18P
Hand crimper with 20-22 AWG Die
6 Way Tru-Loc Dummy Plug
6 Way Tru-Loc Resistor Plug
6 Way Tru-Loc Plug, Gold Contacts for 20 AWG Wire
Tru-Loc Splitter Receptacle for 6 Way Plugs
6 Way Tru-Loc
Resistor Plug
(Dimensions are the
same as the standard
6 Way Tru-Loc Plug)
Ask about our custom matched impedance cable with 2 sets of
20AWG twisted pairs, each rated for 120 Ohms impedance.
44.5
3
15 20
23
2.2
PRE-LOAD
POSITION
0.65
SOCKET
RECESS
REAR OF PLUG FILLED
WITH POTTING COMPOUND