LINEAR PATTERNS - Vishay Telefunken

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document No: 11508

Revision 26-Aug-03

www.vishaymg.com

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

General Purpose Strain Gages - Linear Patterns

FEATURES

• Gage patterns designed for measuring strain in a single direction

• Single-grid and parallel dual-grid patterns

• Gage lengths from 0.008 in (0.20 mm) to 0.500 in (12.7 mm)

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.008 0.080 0.010 0.068

0.20 2.03 0.25 1.73

0.20L x 0.13W 5.1L x 3.3W

Micro-grid gage for strain measurement in high-gradient areas.

SA-XX-008CL-120

1X 6X

008CL

120 ±1.0%

0.015 0.065 0.020 0.064

0.38 1.65 0.51 1.63

0.19L x 0.15W 4.8L x 3.8W

Micro-miniature pattern with enlarged solder tabs. See also 015UW

pattern.

EA-XX-015CK-120

WA-XX-015CK-120

EP-08-015CK-120

SA-XX-015CK-120

1X 6X

015CK

120 ±0.3%

120 ±0.5%

120 ±0.3%

120 ±0.5%

W, E, L, LE

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.015 0.100 0.020 0.020

0.38 2.54 0.51 0.51

0.23L x 0.12W 5.8L x 3.0W

Micro-miniature pattern with tab at each end of grid. See also 015EH

pattern.

EA-XX-015DJ-120

EP-08-015DJ-120

SA-XX-015DJ-120

SK-XX-015DJ-120

1X 4X

015DJ

120 ±0.3%

120 ±0.6%

0.015 0.025 0.020 0.100

0.38 0.64 0.51 2.54

0.15L x 0.19W 3.8L x 4.8W

Similar to 015DJ pattern but with tab at each side of grid.

EA-XX-015EH-120

EP-08-015EH-120

SA-XX-015EH-120

SK-XX-015EH-120

1X 4X

015EH

120 ±0.3%

120 ±0.6%

L, LE

0.015 0.080 0.050 0.050

0.38 2.03 1.27 1.27

0.17L x 0.14W 4.3L x 3.6W

Micro-miniature pattern with higher power dissipation than 015EH

pattern.

EA-XX-015DV-120

EP-08-015DV-120

SA-XX-015DV-120

1X 6X

015DV

120 ±0.3%

120 ±0.6%

L, LE

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.015 0.070 0.020 0.020

0.38 1.78 0.51 0.51

0.18L x 0.10W 4.6L x 2.5W

Primarily used in small radii where gage tabs must be at one end.

EA-XX-015LA-120

EP-08-015LA-120

1X 4X

015LA

120 ±0.3%

0.015 0.064 0.020 0.065

0.38 1.63 0.51 1.65

0.16L x 0.14W 4.1L x 3.6W

Micro-miniature pattern with tabs on one side for use near abutments.

EA-XX-015SE-120

EP-08-015SE-120

SA-XX-015SE-120

1X 6X

015SE

120 ±0.3%

120 ±0.6%

W, E, L, LE

0.015 0.140 0.020 0.105

0.38 3.56 0.51 2.67

0.24L x 0.18W 6.1L x 4.6W

Micro-miniature pattern. Exposed solder tab area is 0.06 x 0.04 in

(1.5 x 1.0 mm). See also 015CK pattern.

CEA-XX-015UW-120

1X 4X

120 ±0.3%

015UW ‘C’ FEATURE

CEA-Series Strain Gages

feature large copper

solder tabs and a completely

encapsulated grid.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.030 0.094 0.030 0.030

0.76 2.39 0.76 0.76

0.24L x 0.15W 6.1L x 3.8W

Miniature gage pattern for small radii where gage tabs must be at one

end.

EA-XX-030LB-120

EP-08-030LB-120

SA-XX-030LB-120

1X 6X

030LB

120 ±0.2%

120 ±0.4%

0.031 0.076 0.062 0.062

0.79 1.93 1.57 1.57

0.23L x 0.16W 5.8L x 4.1W

General-purpose high-resistance miniature gage. See also 031CF and

032UW patterns.

EA-XX-031CE-350

WA-XX-031CE-350

EP-08-031CE-350

SA-XX-031CE-350

1X 6X

031CE

350 ±0.2%

350 ±0.4%

350 ±0.2%

350 ±0.4%

0.031 0.076 0.062 0.062

0.79 1.93 1.57 1.57

0.19L x 0.14W 4.8L x 3.5W

General-purpose miniature gage. Similar to 031CE pattern except for

resistance. See also 032UW pattern.

EA-XX-031CF-120

ED-DY-031CF-350

WA-XX-031CF-120

WK-XX-031CF-350

EP-08-031CF-120

SA-XX-031CF-120

SK-XX-031CF-120

SK-XX-031CF-350

SD-DY-031CF-350

1X 6X

031CF

120 ±0.2%

350 ±0.4%

120 ±0.4%

350 ±0.4%

120 ±0.2%

120 ±0.4%

350 ±0.4%

350 ±0.8%

W, E, L, LE, P

E, L*, LE*

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.031 0.140 0.032 0.032

0.79 3.56 0.81 0.81

0.27L x 0.12W 6.9L x 3.0W

General-purpose miniature gage. See also 031EC pattern.

EA-XX-031DE-120

EA-XX-031DE-350

ED-DY-031DE-350

WA-XX-031DE-120

WA-XX-031DE-350

WK-XX-031DE-350

EP-08-031DE-120

SA-XX-031DE-120

SA-XX-031DE-350

SK-XX-031DE-120

SK-XX-031DE-350

SD-DY-031DE-350

1X 4X

031DE

120 ±0.2%

350 ±0.2%

350 ±0.4%

120 ±0.4%

350 ±0.4%

120 ±0.2%

120 ±0.4%

350 ±0.4%

120 ±0.4%

350 ±0.4%

350 ±0.8%

0.031 0.042 0.032 0.140

0.79 1.07 0.81 3.56

0.17L x 0.23W 4.3L x 5.8W

General-purpose miniature gage. Similar to 031DE pattern but with

tab at each side of grid.

EA-XX-031EC-120

EA-XX-031EC-350

ED-DY-031EC-350

WA-XX-031EC-120

WA-XX-031EC-350

WK-XX-031EC-350

EP-08-031EC-120

SA-XX-031EC-120

SA-XX-031EC-350

SK-XX-031EC-120

SK-XX-031EC-350

SD-DY-031EC-350

1X 4X

031EC

120 ±0.2%

350 ±0.2%

350 ±0.4%

120 ±0.4%

350 ±0.4%

120 ±0.2%

120 ±0.4%

350 ±0.4%

120 ±0.4%

350 ±0.4%

350 ±0.8%

E, SE, L, LE

E, L*, LE*

E, SE, L, LE

E, L*, LE*

0.032 0.064 0.032 0.072

0.81 1.63 0.81 1.83

0.16L x 0.19W 4.1L x 4.8W

Miniature gage with side-tab geometry.

EA-XX-032SG-120

WA-XX-032SG-120

WK-XX-032SG-120

EP-08-032SG-120

SA-XX-032SG-120

SK-XX-032SG-120

1X 6X

032SG

120 ±0.2%

120 ±0.4%

120 ±0.2%

120 ±0.4%

W, E, L, LE, P

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.045 0.090 0.045 0.045

1.14 2.29 1.14 1.14

0.22L x 0.14W 5.6L x 3.6W

Miniature high-resistance gage.

EA-XX-045AL-350

SA-XX-045AL-350

1X 4X

045AL

350 ±0.15%

350 ±0.3%

0.050 0.100 0.040 0.040

1.27 2.54 1.02 1.02

0.23L x 0.14W 5.8L x 3.6W

General-purpose miniature gage.

EA-XX-050AH-120

ED-DY-050AH-350

EP-08-050AH-120

SA-XX-050AH-120

SK-XX-050AH-350

SD-DY-050AH-350

1X 4X

050AH

120 ±0.15%

350 ±0.4%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.8%

E, L, LE

E, L*, LE*

0.032 0.180 0.060 0.120

0.81 4.57 1.52 3.05

0.27L x 0.19W 6.9L x 4.8W

General-purpose miniature gage. Exposed solder tab area is 0.07 x

0.04 in (1.8 x 1.0 mm).

CEA-XX-032UW-120

1X 2X

120 ±0.3%

032UW ‘C’ FEATURE

CEA-Series Strain Gages

feature large copper

solder tabs and a completely

encapsulated grid.

Available with Option P2

(preattached leadwire cables)

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.050 0.100 0.050 0.078

1.27 2.54 1.27 1.98

0.25L x 0.18W 6.4L x 4.6W

General-purpose miniature gage with large solder tabs.

EA-XX-050AR-120

ED-DY-050AR-350

WA-XX-050AR-120

WK-XX-050AR-350

SA-XX-050AR-120

SK-XX-050AR-350

SD-DY-050AR-350

WD-DY-050AR-350

1X 4X

050AR

120 ±0.15%

350 ±0.4%

120 ±0.3%

350 ±0.3%

120 ±0.3%

350 ±0.3%

350 ±0.8%

0.050 0.070 0.040 0.080

1.27 1.78 1.02 2.03

0.19L x 0.19W 4.8L x 4.8W

Similar to the 050AH pattern but with solder tabs at side of grid.

EA-XX-050SB-120

ED-DY-050SB-350

WA-XX-050SB-120

WK-XX-050SB-350

EP-08-050SB-120

SA-XX-050SB-120

SK-XX-050SB-350

SD-DY-050SB-350

WD-DY-050SB-350

1X 4X

050SB

120 ±0.15%

350 ±0.4%

120 ±0.3%

350 ±0.3%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.8%

0.060 0.104 0.054 0.054

1.52 2.64 1.37 1.37

0.18L x 0.13W 4.6L x 3.3W

General-purpose miniature gage.

EA-XX-060BN-120

ED-DY-060BN-350

SA-XX-060BN-120

SK-XX-060BN-350

SD-DY-060BN-350

1X 4X

060BN

120 ±0.15%

350 ±0.4%

120 ±0.3%

350 ±0.3%

350 ±0.8%

E, P

W, E, L, LE, P

E, L*, LE*

W, E, L, LE, P

E, L*, LE*

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

060CN

0.060 0.200 0.180 0.180

1.52 5.08 4.57 4.57

0.33L x 0.27W 8.3L x 6.9W

Small high-resistance gage with high power-handling capability. See

also 060CP pattern.

EA-XX-060CC-350

ED-DY-060CC-10C

WA-XX-060CC-350

WK-XX-060CC-10C

EP-08-060CC-350

SA-XX-060CC-350

SK-XX-060CC-10C

SD-DY-060CC-10C

WD-DY-060CC-10C

1X 2X

060CC

350 ±0.15%

1000 ±0.4%

350 ±0.3%

1000 ±0.3%

350 ±0.15%

350 ±0.3%

1000 ±0.3%

1000 ±0.8%

0.060 0.150 0.100 0.100

1.52 3.81 2.54 2.54

0.28L x 0.20W 7.1L x 5.1W

Small high-resistance gage. See also 060CN pattern.

EA-XX-060CD-350

ED-DY-060CD-10C

WA-XX-060CD-350

WK-XX-060CD-10C

SA-XX-060CD-350

SK-XX-060CD-10C

SD-DY-060CD-10C

WD-DY-060CD-10C

1X 2X

060CD

350 ±0.15%

1000 ±0.4%

350 ±0.3%

1000 ±0.3%

350 ±0.3%

1000 ±0.3%

1000 ±0.8%

W, E, L, LE, P

E, L*, LE*

W, E, L, LE, P

E, L*, LE*

0.060 0.150 0.100 0.100

1.52 3.81 2.54 2.54

0.26L x 0.18W 6.6L x 4.6W

Similar to 060CD pattern except for grid resistance.

EA-XX-060CN-120

ED-DY-060CN-350

WA-XX-060CN-120

WK-XX-060CN-350

EP-08-060CN-120

SA-XX-060CN-120

SD-DY-060CN-350

WD-DY-060CN-350

1X 2X

120 ±0.15%

350 ±0.4%

120 ±0.3%

350 ±0.3%

120 ±0.15%

120 ±0.3%

350 ±0.8%

W, E, L, LE, P

E, L*, LE*

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.060 0.080 0.150 0.230

1.52 2.03 3.81 5.84

0.15L x 0.30W 3.8L x 7.6W

Small high-resistance gage with large grid area and side-tab geometry.

EA-XX-060EK-350

ED-DY-060EK-10C

SA-XX-060EK-350

SK-XX-060EK-10C

SD-DY-060EK-10C

1X 2X

060EK

350 ±0.15%

1000 ±0.4%

350 ±0.3%

1000 ±0.3%

1000 ±0.8%

0.060 ES 0.120 CP 0.065 ES 0.150 CP

1.52 ES 3.05 CP 1.65 ES 3.81 CP

0.18L x 0.20W 4.6L x 5.1W

Dual pattern for back-to-back bending sections. Longitudinal grid

centerlines spaced 0.085 in (2.16 mm) apart.

EA-XX-060PB-120

EA-XX-060PB-350

WA-XX-060PB-120

WA-XX-060PB-350

WK-XX-060PB-350

WK-XX-060PB-500

SA-XX-060PB-120

SA-XX-060PB-350

SK-XX-060PB-350

SK-XX-060PB-500

1X 2X

060PB

120 ±0.2%

350 ±0.2%

120 ±0.3%

350 ±0.3%

500 ±0.3%

120 ±0.3%

350 ±0.3%

500 ±0.3%

E, L, LE

E, L*, LE*

W, E, L, LE

0.060 0.200 0.180 0.180

1.52 5.08 4.57 4.57

0.31L x 0.26W 7.9L x 6.6W

Similar to the 060CC pattern except for grid resistance.

EA-XX-060CP-120

ED-DY-060CP-350

WA-XX-060CP-120

WK-XX-060CP-350

EP-08-060CP-120

SA-XX-060CP-120

SK-XX-060CP-350

SD-DY-060CP-350

WD-DY-060CP-350

1X 2X

060CP

120 ±0.15%

350 ±0.4%

120 ±0.3%

350 ±0.3%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.8%

W, E, L, LE, P

E, L*, LE*

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.062 0.150 0.062 0.100

1.57 3.81 1.57 2.54

0.35L x 0.21W 8.9L x 5.3W

General-purpose gage with large solder tabs. See the 062AP pattern

for WA, WK, and other series with this grid size.

EA-XX-062AA-120

1X 2X

062AA

120 ±0.15%

0.062 0.160 0.062 0.062

1.57 4.06 1.57 1.57

0.27L x 0.14W 6.9L x 3.6W

General-purpose gage with elongated solder tabs. See the 062AP

pattern for WA, WK, and other series with this grid size.

EA-XX-062AK-120

ED-DY-062AK-350

EP-08-062AK-120

1X 2X

062AK

120 ±0.15%

350 ±0.4%

120 ±0.15%

0.062 0.114 0.062 0.062

1.57 2.90 1.57 1.57

0.26L x 0.16W 6.6L x 4.1W

Widely used general-purpose gage. See also 062AQ and 062UW

patterns. EK-Series gages are supplied with duplex copper pads (DP)

when optional feature W or SE is not specified.

EA-XX-062AP-120

ED-DY-062AP-350

EK-XX-062AP-350

WA-XX-062AP-120

WK-XX-062AP-350

EP-08-062AP-120

SA-XX-062AP-120

SK-XX-062AP-350

SD-DY-062AP-350

WD-DY-062AP-350

1X 2X

062AP

120 ±0.15%

350 ±0.4%

350 ±0.15%

120 ±0.3%

350 ±0.3%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.8%

W, E, L, LE, P

E, L*, LE*

W, SE

E, P

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.062 0.114 0.062 0.062

1.57 2.90 1.57 1.57

0.26L x 0.15W 6.6L x 3.8W

General-purpose gage. Similar to 062AP pattern but with high-

resistance grid. See also 062UW pattern.

EA-XX-062AQ-350

ED-DY-062AQ-500

WA-XX-062AQ-350

WK-XX-062AQ-500

EP-08-062AQ-350

SA-XX-062AQ-350

SK-XX-062AQ-500

SD-DY-062AQ-500

WD-DY-062AQ-500

1X 2X

062AQ

350 ±0.15%

500 ±0.4%

350 ±0.3%

500 ±0.3%

350 ±0.15%

350 ±0.3%

500 ±0.3%

500 ±0.8%

0.062 0.114 0.062 0.062

1.57 2.90 1.57 1.57

0.26L x 0.16W 6.6L x 4.1W

Similar to 062AP pattern but with low-resistance grid. Normally used

when 120-ohm resistance is needed in WK or SK Series.

WK-XX-062AU-120

SK-XX-062AU-120

1X 2X

062AU

120 ±0.3%

W, E, L, LE, P

E, L*, LE*

0.062 0.190 0.062 0.062

1.57 4.83 1.57 1.57

0.32L x 0.16W 8.1L x 4.1W

General-purpose gage with solder tab at each end of grid. See also

062DN pattern.

EA-XX-062DF-120

ED-DY-062DF-350

WA-XX-062DF-120

WK-XX-062DF-350

EP-08-062DF-120

SA-XX-062DF-120

SK-XX-062DF-350

SD-DY-062DF-350

WD-DY-062DF-350

1X 2X

062DF

120 ±0.15%

350 ±0.4%

120 ±0.3%

350 ±0.3%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.8%

E, L, LE

E, L*, LE*

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.062 0.190 0.062 0.062

1.57 4.83 1.57 1.57

0.34L x 0.18W 8.6L x 4.6W

Similar to 062DF pattern except for grid resistance.

EA-XX-062DN-350

ED-DY-062DN-500

WA-XX-062DN-350

WK-XX-062DN-500

EP-08-062DN-350

SA-XX-062DN-350

SK-XX-062DN-500

SD-DY-062DN-500

WD-DY-062DN-500

1X 2X

062DN

350 ±0.15%

500 ±0.4%

350 ±0.3%

500 ±0.3%

350 ±0.15%

350 ±0.3%

500 ±0.3%

500 ±0.8%

0.062 0.076 0.062 0.190

1.57 1.93 1.57 4.83

0.21L x 0.29W 5.3L x 7.4W

EA-XX-062ED-120

ED-DY-062ED-350

WA-XX-062ED-120

WK-XX-062ED-350

EP-08-062ED-120

SA-XX-062ED-120

SK-XX-062ED-350

SD-DY-062ED-350

WD-DY-062ED-350

1X 2X

062ED

120 ±0.15%

350 ±0.4%

120 ±0.3%

350 ±0.3%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.8%

General-purpose gage. Similar to 062DF pattern but with solder tab

at each side of grid. See also 062EN pattern

E, L, LE

E, L*, LE*

E, L, LE

E, L*, LE*

0.062 0.076 0.062 0.190

1.57 1.93 1.57 4.83

0.23L x 0.31W 5.8L x 7.9W

Similar to 062ED pattern except for grid resistance.

EA-XX-062EN-350

ED-DY-062EN-500

WA-XX-062EN-350

WK-XX-062EN-500

EP-08-062EN-350

SA-XX-062EN-350

SK-XX-062EN-500

SD-DY-062EN-500

WD-DY-062EN-500

1X 2X

062EN

350 ±0.15%

500 ±0.4%

350 ±0.3%

500 ±0.3%

350 ±0.15%

350 ±0.3%

500 ±0.3%

500 ±0.8%

E, L, LE

E, L*, LE*

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.070 0.164 0.022 0.022

1.78 4.17 0.56 0.56

0.24L x 0.09W 6.1L x 2.3W

Very narrow gage for use in restricted areas.

EA-XX-070LC-120

EA-XX-070LC-350

1X 2X

070LC

120 ±0.15%

350 ±0.15%

0.075 0.180 0.075 0.120

1.91 4.57 1.91 3.05

0.31L x 0.18W 7.9L x 4.6W

General-purpose gage with large solder tabs. See also 075AM pattern.

EA-XX-075AA-120

ED-DY-075AA-350

1X 2X

075AA

120 ±0.15%

350 ±0.3%

E, P

0.062 0.220 0.120 0.120

1.57 5.59 3.05 3.05

0.31L x 0.19W 7.9L x 4.8W

General-purpose gage. Exposed solder tab area is 0.07 x 0.04 in

(1.8 x 1.0 mm).

CEA-XX-062UW-120

CEA-XX-062UW-350

1X 2X

120 ±0.3%

350 ±0.3%

062UW ‘C’ FEATURE

CEA-Series Strain Gages

feature large copper

solder tabs and a completely

encapsulated grid.

Available with Option P2

(preattached leadwire cables)

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.075 0.180 0.075 0.120

1.91 4.57 1.91 3.05

0.31L x 0.18W 7.9L x 4.6W

General-purpose gage with large solder tabs. Similar to 075AA pattern

except for resistance.

EA-XX-075AM-350

ED-DY-075AM-10C

1X 2X

075AM

350 ±0.15%

1000 ±0.4%

0.090 0.250 0.125 0.125

2.29 6.35 3.18 3.18

0.44L x 0.26W 11.2L x 6.6W

Intermediate-size grid with tab at each end. See also 090DH and

090EF patterns.

EA-XX-090DG-120

ED-DY-090DG-350

EP-08-090DG-120

SA-XX-090DG-120

SK-XX-090DG-350

SD-DY-090DG-350

1X 2X

090DG

120 ±0.15%

350 ±0.4%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.8%

0.090 0.250 0.125 0.125

2.29 6.35 3.18 3.18

0.45L x 0.27W 11.4L x 6.9W

High-resistance version of the 090DG pattern.

EA-XX-090DH-350

ED-DY-090DH-10C

EP-08-090DH-350

SA-XX-090DH-350

SK-XX-090DH-10C

SD-DY-090DH-10C

1X 2X

090DH

350 ±0.15%

1000 ±0.4%

350 ±0.15%

350 ±0.3%

1000 ±0.3%

1000 ±0.8%

E, P

E, L, LE

E, L*, LE*

E, L, LE

E, L*, LE*

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.090 0.125 0.125 0.250

2.29 3.18 3.18 6.35

0.29L x 0.36W 7.4L x 9.1W

Similar to 090DG pattern but with solder tab at each side of grid. See

also 090EG pattern.

EA-XX-090EF-120

ED-DY-090EF-350

EP-08-090EF-120

SA-XX-090EF-120

SK-XX-090EF-350

SD-DY-090EF-350

1X 2X

090EF

120 ±0.15%

350 ±0.4%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.8%

0.090 0.120 0.125 0.250

2.29 3.05 3.18 6.35

0.29L x 0.36W 7.4L x 9.1W

High-resistance version of the 090EF pattern.

EA-XX-090EG-350

ED-DY-090EG-10C

EP-08-090EG-350

SA-XX-090EG-350

SK-XX-090EG-10C

SD-DY-090EG-10C

1X 2X

090EG

350 ±0.15%

1000 ±0.4%

350 ±0.15%

350 ±0.3%

1000 ±0.3%

1000 ±0.8%

0.090 0.120 0.010 0.060

2.29 3.05 0.25 1.52

0.18L x 0.14W 4.6L x 3.6W

Side-tab gage with extremely narrow grid for use near abutments.

EA-XX-090SC-120

WA-XX-090SC-120

SA-XX-090SC-120

1X 2X

090SC

120 ±0.2%

120 ±0.4%

E, L, LE

E, L*, LE*

E, L, LE

E, L*, LE*

W, E, L, LE, P

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.100 0.225 0.050 0.100

2.54 5.72 1.27 2.54

0.34L x 0.16W 8.6L x 4.1W

Narrow grid pattern with large solder tabs.

EA-XX-100BR-120

ED-DY-100BR-350

WA-XX-100BR-120

WK-XX-100BR-350

SA-XX-100BR-120

SK-XX-100BR-350

SD-DY-100BR-350

WD-DY-100BR-350

1X 2X

100BR

120 ±0.15%

350 ±0.4%

120 ±0.3%

350 ±0.3%

120 ±0.3%

350 ±0.3%

350 ±0.8%

0.100 0.181 0.080 0.080

2.54 4.60 2.03 2.03

0.24L x 0.13W 6.1L x 3.3W

Ultra-high-resistance gage with compact geometry.

SK-XX-100GD-45C

WK-XX-100GD-45C

1X 2X

100GD

4500 ±0.2%

0.125 0.300 0.125 0.200

3.18 7.62 3.18 5.08

0.46L x 0.26W 11.7L x 6.6W

General-purpose gage with large solder tabs. See also 125AD, 125UN

and 125UW patterns.

EA-XX-125AA-120

ED-DY-125AA-350

125AA

120 ±0.15%

350 ±0.3%

W, E, L, LE, P

E, L*, LE*

E, P

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.125 0.250 0.125 0.125

3.18 6.35 3.18 3.18

0.40L x 0.22W 10.2L x 5.6W

EA-XX-125AC-350

ED-DY-125AC-10C

EK-XX-125AC-10C

S2K-XX-125AC-10C

WA-XX-125AC-350

WK-XX-125AC-10C

EP-08-125AC-350

SA-XX-125AC-350

SK-XX-125AC-10C

SD-DY-125AC-10C

WD-DY-125AC-10C

125AC

350 ±0.15%

1000 ±0.3%

1000 ±0.15%

1000 ±0.3%

350 ±0.3%

1000 ±0.3%

350 ±0.15%

350 ±0.3%

1000 ±0.3%

1000 ±0.6%

0.125 0.250 0.125 0.125

3.18 6.35 3.18 3.18

0.40L x 0.22W 10.2L x 5.6W

Widely used general-purpose gage. See also 125AC pattern. EK-Series

gages are supplied with duplex copper pads (DP) when optional feature

W or SE is not specified.

EA-XX-125AD-120

ED-DY-125AD-350

EK-XX-125AD-350

WA-XX-125AD-120

WK-XX-125AD-350

EP-08-125AD-120

SA-XX-125AD-120

SK-XX-125AD-350

SD-DY-125AD-350

WD-DY-125AD-350

125AD

120 ±0.15%

350 ±0.3%

350 ±0.15%

120 ±0.3%

350 ±0.3%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.6%

W, E, L, LE, P

E, L*, LE*

W, SE

W, E, L, LE, P

E, L*, LE*

W, SE

0.125 0.300 0.125 0.200

3.18 7.62 3.18 5.08

0.50L x 0.28W 12.7L x 7.1W

General-purpose gage with large solder tabs and high-resistance grid.

See the 125AC design for WA, SK, and other series with this grid size.

See also 125UW pattern.

EA-XX-125AM-350

ED-DY-125AM-10C

125AM

350 ±0.15%

1000 ±0.3% E, P

Widely used general-purpose gage with high-resistance grid. See also

125AD, 125UN, and 125UW patterns. EK-Series gages are supplied

with duplex copper pads (DP) when optional feature W or SE is not

specified.

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.125 0.250 0.125 0.125

3.18 6.35 3.18 3.18

0.37L x 0.21W 9.4L x 5.3W

High-resistance gage.

EA-XX-125AS-500

ED-DY-125AS-15C

WA-XX-125AS-500

WK-XX-125AS-15C

SA-XX-125AS-500

SK-XX-125AS-15C

SD-DY-125AS-15C

WD-DY-125AS-15C

125AS

500 ±0.15%

1500 ±0.4%

500 ±0.3%

1500 ±0.3%

500 ±0.3%

1500 ±0.3%

1500 ±0.8%

W, E, L, LE, P

0.125 0.245 0.088 0.088

3.18 6.22 2.24 2.24

0.43L x 0.22W 10.9L x 5.6W

Narrow general-purpose gage with extended tabs.

EA-XX-125BB-120

ED-DY-125BB-350

WA-XX-125BB-120

WK-XX-125BB-350

EP-08-125BB-120

SA-XX-125BB-120

SK-XX-125BB-350

SD-DY-125BB-350

WD-DY-125BB-350

125BB

120 ±0.15%

350 ±0.3%

120 ±0.3%

350 ±0.3%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.6%

E, P

0.125 0.250 0.050 0.060

3.18 6.35 1.27 1.52

0.38L x 0.14W 9.7L x 3.6W

Narrow pattern primarily used in the WK and SK Series for 120-ohm

resistance.

ED-DY-125BS-120

WK-XX-125BS-120

SK-XX-125BS-120

SD-DY-125BS-120

WD-DY-125BS-120

125BS

120 ±0.3%

120 ±0.6%

1X 2X

E, L*, LE*

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.125 0.215 0.062 0.062

3.18 5.46 1.57 1.57

0.37L x 0.16W 9.4L x 4.1W

General-purpose gage with narrow grid and compact geometry. See

also 125BZ pattern.

EA-XX-125BT-120

ED-DY-125BT-350

WA-XX-125BT-120

WK-XX-125BT-350

EP-08-125BT-120

SA-XX-125BT-120

SK-XX-125BT-350

SD-DY-125BT-350

WD-DY-125BT-350

125BT

120 ±0.15%

350 ±0.3%

120 ±0.3%

350 ±0.3%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.6%

1X 2X

W, E, L, LE, P

E, L*, LE*

0.125 0.220 0.062 0.062

3.18 5.59 1.57 1.57

0.29L x 0.13W 7.4L x 3.3W

Narrow high-resistance gage with compact geometry. Similar to 125BT

pattern except for grid resistance. EK-Series gages are supplied with

duplex copper dots (DD) when optional feature W or SE is not specified.

EA-XX-125BZ-350

ED-DY-125BZ-10C

EK-XX-125BZ-10C

WA-XX-125BZ-350

WK-XX-125BZ-10C

SA-XX-125BZ-350

SK-XX-125BZ-10C

SD-DY-125BZ-10C

WD-DY-125BZ-10C

125BZ

350 ±0.15%

1000 ±0.4%

1000 ±0.15%

350 ±0.3%

1000 ±0.3%

350 ±0.3%

1000 ±0.3%

1000 ±0.8%

1X 2X

W, E, L, LE, P

E, L*, LE*

0.125 0.315 0.180 0.180

3.18 8.00 4.57 4.57

0.43L x 0.26W 10.9L x 6.6W

High-dissipation gage with large solder tabs.

EA-XX-125CA-120

ED-DY-125CA-350

WA-XX-125CA-120

WK-XX-125CA-350

EP-08-125CA-120

WD-DY-125CA-350

125CA

120 ±0.15%

350 ±0.3%

120 ±0.3%

350 ±0.3%

120 ±0.15%

350 ±0.6%

W, E, L, LE, P

E, L*, LE*

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.125 0.270 0.125 0.125

3.18 6.86 3.18 3.18

0.34L x 0.19W 8.6L x 4.8W

Similar to 125DP pattern except for grid resistance. See also 125UE

pattern.

EA-XX-125DQ-120

ED-DY-125DQ-350

EP-08-125DQ-120

SA-XX-125DQ-120

SK-XX-125DQ-350

SD-DY-125DQ-350

125DQ

120 ±0.15%

350 ±0.3%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.6%

E, L, LE

0.125 0.290 0.175 0.175

3.18 7.37 4.45 4.45

0.40L x 0.28W 10.2L x 7.1W

High-dissipation, low-resistance gage used in eight-gage bridge circuits.

EA-XX-125CH-060

WA-XX-125CH-060

WK-XX-125CH-175

SA-XX-125CH-060

SK-XX-125CH-175

125CH

60 ±0.15%

60 ±0.3%

175 ±0.3%

60 ±0.3%

175 ±0.3%

W, E, SE, L, LE, P

0.125 0.270 0.125 0.125

3.18 6.86 3.18 3.18

0.34L x 0.19W 8.6L x 4.8W

High-resistance gage with tab at each end of grid. See also 125DQ and

125UE patterns.

EA-XX-125DP-350

ED-DY-125DP-10C

EP-08-125DP-350

SA-XX-125DP-350

SK-XX-125DP-10C

SD-DY-125DP-10C

125DP

350 ±0.15%

1000 ±0.3%

350 ±0.15%

350 ±0.3%

1000 ±0.3%

1000 ±0.6%

E, L, LE

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.125 0.150 0.125 0.250

3.18 3.81 3.18 6.35

0.28L x 0.35W 7.1L x 8.9W

High-resistance gage with tab at each side of grid. See also 125EQ

pattern.

EA-XX-125EP-350

ED-DY-125EP-10C

EP-08-125EP-350

SA-XX-125EP-350

SK-XX-125EP-10C

SD-DY-125EP-10C

125EP

350 ±0.15%

1000 ±0.3%

350 ±0.15%

350 ±0.3%

1000 ±0.3%

1000 ±0.6%

E, L, LE

0.125 0.210 0.100 0.100

3.18 5.33 2.54 2.54

0.28L x 0.17W 7.1L x 4.3W

Very high resistance in compact grid geometry.

SK-XX-125GF-20C

WK-XX-125GF-20C

125GF

2000 ±0.3%

1X 2X

0.125 0.150 0.125 0.250

3.18 3.81 3.18 6.35

0.28L x 0.35W 7.1L x 8.9W

Similar to 125EP pattern except for grid resistance.

EA-XX-125EQ-120

ED-DY-125EQ-350

EP-08-125EQ-120

SA-XX-125EQ-120

SK-XX-125EQ-350

SD-DY-125EQ-350

125EQ

120 ±0.15%

350 ±0.3%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.6%

E, L, LE

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

Compact pattern for applications similar to those described for 125MG.

Very narrow grid geometry. Longitudinal grid centerlines spaced 0.040 in

(1.02 mm) apart.

EA-XX-125MK-120

WA-XX-125MK-120

WK-XX-125MK-350

SA-XX-125MK-120

SK-XX-125MK-350

120 ±0.2%

120 ±0.4%

350 ±0.4%

120 ±0.4%

350 ±0.4%

0.125 0.275 0.062 0.062

3.18 6.99 1.57 1.57

0.41L x 0.16W 10.4L x 4.1W

Narrow general-purpose gage with tab at each end of grid. See also

125UE pattern.

EA-XX-125HN-120

ED-DY-125HN-350

EP-08-125HN-120

SA-XX-125HN-120

SK-XX-125HN-350

125HN

120 ±0.15%

350 ±0.3%

120 ±0.15%

120 ±0.3%

350 ±0.3%

0.125 ES 0.235 CP 0.030 ES 0.130 CP

3.18 ES 5.97 CP 0.76 ES 3.30 CP

0.37L x 0.21W 9.4L x 5.3W

125MK

E, L, LE

W, E

1X 2X

Dual-pattern gage for use in back-to-back bending applications. Longitu-

dinal grid centerlines spaced 0.250 in (6.35 mm) apart. See also 125PC

pattern.

EA-XX-125MG-120

WA-XX-125MG-120

WK-XX-125MG-350

SA-XX-125MG-120

SK-XX-125MG-350

120 ±0.2%

120 ±0.4%

350 ±0.4%

120 ±0.4%

350 ±0.4%

0.125 ES 0.220 CP 0.125 ES 0.375 CP

3.18 ES 5.59 CP 3.18 ES 9.53 CP

0.32L x 0.47W 8.1L x 11.9W

125MG

W, E, L, LE

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

CEA-XX-125UE-120

CEA-XX-125UE-350

120 ±0.3%

350 ±0.3%

General-purpose gage with large tab at each end of grid. Exposed

solder tab area 0.08 x 0.07 in (2.0 x 1.8 mm).

CEA-Series Strain Gages

feature large copper

solder tabs and a completely

encapsulated grid.

0.125 0.470 0.125 0.125

3.18 11.94 3.18 3.18

0.57L x 0.20W 14.5L x 5.1W

125UE ‘C’ FEATURE

Dual-pattern gage for use in back-to-back bending applications.

Longitudinal grid centerlines spaced 0.085 in (2.16 mm) apart. See also

125MG pattern. EK-Series gages are supplied with duplex copper pads

(DP) when optional feature W or SE is not specified.

EA-XX-125PC-120

EA-XX-125PC-350

ED-DY-125PC-350

ED-DY-125PC-10C

EK-XX-125PC-10C

WA-XX-125PC-120

WA-XX-125PC-350

WK-XX-125PC-350

WK-XX-125PC-10C

SA-XX-125PC-120

SA-XX-125PC-350

SK-XX-125PC-350

SK-XX-125PC-10C

120 ±0.2%

350 ±0.2%

350 ±0.4%

1000 ±0.4%

1000 ±0.2%

120 ±0.4%

350 ±0.4%

1000 ±0.4%

120 ±0.4%

350 ±0.4%

1000 ±0.4%

0.125 ES 0.205 CP 0.065 ES 0.150 CP

3.18 ES 5.21 CP 1.65 ES 3.81 CP

0.29L x 0.23W 7.4L x 5.8W

125PC

W, E, L, LE

W, SE

0.125 0.275 0.100 0.120

3.18 6.99 2.54 3.05

0.38L x 0.19W 9.7L x 4.8W

General-purpose gage with narrow geometry. Exposed solder tab area

0.06 x 0.05 in (1.5 x 1.1 mm). See also 125UW pattern.

CEA-XX-125UN-120

CEA-XX-125UN-350 120 ±0.3%

350 ±0.3%

125UN ‘C’ FEATURE

CEA-Series Strain Gages

feature large copper

solder tabs and a completely

encapsulated grid.

Available with Option P2

(preattached leadwire cables)

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

General-purpose gage. Exposed solder tab area 0.10 x 0.07 in

(2.5 x 1.8 mm).

Narrow general-purpose gage with long tabs. See also 187UW pattern.

EA-XX-187BB-120

ED-DY-187BB-350

WA-XX-187BB-120

WK-XX-187BB-350

EP-08-187BB-120

SA-XX-187BB-120

SK-XX-187BB-350

SD-DY-187BB-350

WD-DY-187BB-350

120 ±0.15%

350 ±0.3%

120 ±0.3%

350 ±0.3%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.6%

CEA-XX-187UW-120

CEA-XX-187UW-350 120 ±0.3%

350 ±0.3%

CEA-Series Strain Gages

feature large copper

solder tabs and a completely

encapsulated grid.

Available with Option P2

(preattached leadwire cables).

0.187 0.368 0.131 0.131

4.75 9.35 3.33 3.33

0.55L x 0.26W 14.0L x 6.6W

0.187 0.387 0.180 0.180

4.75 9.83 4.57 4.57

0.49L x 0.27W 12.4L x 6.9W

187BB

187UW

W, E, L, LE, P

E, L*, LE*

‘C’ FEATURE

0.125 0.325 0.180 0.180

3.18 8.26 4.57 4.57

0.42L x 0.27W 10.7L x 6.9W

General-purpose gage. Exposed solder tab area 0.10 x 0.07 (2.5 x 1.8

mm). See also 125UN pattern.

CEA-XX-125UW-120

CEA-XX-125UW-350

120 ±0.3%

350 ±0.3%

125UW ‘C’ FEATURE

CEA-Series Strain Gages

feature large copper

solder tabs and a completely

encapsulated grid.

Available with Option P2

(preattached leadwire cables)

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

General-purpose gage with high-dissipation grid. See also

250AF pattern.

EA-XX-250AE-350

ED-DY-250AE-10C

WA-XX-250AE-350

WK-XX-250AE-10C

EP-08-250AE-350

SA-XX-250AE-350

SK-XX-250AE-10C

SD-DY-250AE-10C

WD-DY-250AE-10C

350 ±0.15%

1000 ±0.3%

350 ±0.3%

1000 ±0.3%

350 ±0.15%

350 ±0.3%

1000 ±0.3%

1000 ±0.6%

Dual-grid gage. Narrow pattern geometry. Grid centerlines are spaced

0.030 in (0.8 mm) apart.

EA-XX-200MB-120

WA-XX-200MB-120

WK-XX-200MB-350

SA-XX-200MB-120

SK-XX-200MB-350

120 ±0.2%

120 ±0.4%

350 ±0.4%

120 ±0.4%

350 ±0.4%

General-purpose gage with very narrow geometry.

EA-XX-230DS-120

ED-DY-230DS-350

WA-XX-230DS-120

WK-XX-230DS-350

EP-08-230DS-120

SA-XX-230DS-120

SK-XX-230DS-350

SD-DY-230DS-350

120 ±0.15%

350 ±0.3%

120 ±0.3%

350 ±0.3%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.6%

0.200 ES 0.330 CP 0.020 ES 0.130 CP

5.08 ES 8.38 CP 0.51 ES 3.30 CP

0.50L x 0.21W 12.7L x 5.3W

0.230 0.375 0.022 0.030

5.84 9.53 0.56 0.76

0.50L x 0.12W 12.7L x 3.0W

0.250 0.415 0.250 0.250

6.35 10.54 6.35 6.35

0.57L x 0.36W 14.5L x 9.1W

200MB

W, E, L, LE

230DS

E, SE, L, LE

250AE

W, E, L, LE, P

E, L*, LE*

1X 2X

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

Primarily used in eight-gage bridge circuits.

EA-XX-250BA-175

ED-DY-250BA-500

WA-XX-250BA-175

WK-XX-250BA-500

SA-XX-250BA-175

SK-XX-250BA-500

SD-DY-250BA-500

WD-DY-250BA-500

175 ±0.15%

500 ±0.3%

175 ±0.3%

500 ±0.3%

175 ±0.3%

500 ±0.3%

500 ±0.6%

General-purpose gage with large solder tabs.

EA-XX-250BB-120

ED-DY-250BB-350

EP-08-250BB-120

120 ±0.15%

350 ±0.3%

120 ±0.15%

General-purpose gage with high-dissipation grid. Similar to 250AE

pattern except for resistance.

EA-XX-250AF-120

ED-DY-250AF-350

WA-XX-250AF-120

WK-XX-250AF-350

EP-08-250AF-120

SA-XX-250AF-120

SK-XX-250AF-350

SD-DY-250AF-350

WD-DY-250AF-350

120 ±0.15%

350 ±0.3%

120 ±0.3%

350 ±0.3%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.6%

0.250 0.415 0.250 0.250

6.35 10.54 6.35 6.35

0.57L x 0.36W 14.5L x 9.1W

0.250 0.375 0.125 0.125

6.35 9.53 3.18 3.18

0.53L x 0.22W 13.5L x 5.6W

250BA

250AF

250BB

0.250 0.490 0.175 0.175

6.35 12.45 4.45 4.45

0.64L x 0.27W 16.3L x 6.9W

W, E, L, LE, P

E, L*, LE*

W, E, L, LE, P

E, L*, LE*

W, E, L, LE, P

E, L*, LE*

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

Widely used general-purpose gage. Compact geometry. See also

250BF and 250UN patterns.

EA-XX-250BG-120

ED-DY-250BG-350

WA-XX-250BG-120

WK-XX-250BG-350

EA-XX-250BG-100

EP-08-250BG-120

SA-XX-250BG-120

SK-XX-250BG-350

SD-DY-250BG-350

WD-DY-250BG-350

120 ±0.15%

350 ±0.3%

120 ±0.3%

350 ±0.3%

100 ±0.15%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.6%

General-purpose gage with high-resistance grid. Compact geometry.

Similar to 250BG pattern except for resistance. See also 250BM and

250UW patterns. EK-Series gages are supplied with duplex copper pads

(DP) when optional feature W or SE is not specified.

EA-XX-250BF-350

ED-DY-250BF-10C

EK-XX-250BF-10C

S2K-XX-250BF-10C

WA-XX-250BF-350

WK-XX-250BF-10C

EP-08-250BF-350

SA-XX-250BF-350

SK-XX-250BF-10C

SD-DY-250BF-10C

WD-DY-250BF-10C

350 ±0.15%

1000 ±0.3%

1000 ±0.15%

1000 ±0.3%

350 ±0.3%

1000 ±0.3%

350 ±0.15%

350 ±0.3%

1000 ±0.3%

1000 ±0.6%

250BG

0.250 0.375 0.125 0.125

6.35 9.53 3.18 3.18

0.52L x 0.22W 13.2L x 5.6W

250BF

0.250 0.375 0.125 0.125

6.35 9.53 3.18 3.18

0.52L x 0.22W 13.2L x 5.6W

W, E, L, LE, P

E, L*, LE*

W, E, L, LE, P

E, L*, LE*

W, SE

Narrow high-resistance gage.

EA-XX-250GG-10C 1000 ±0.15%

250GG

0.250 0.352 0.100 0.100

6.35 8.94 2.54 2.54

0.43L x 0.18W 10.9L x 4.6W W, E, L, LE, P

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

A higher resistance version of the 250BF pattern.

EA-XX-250BM-500

ED-DY-250BM-15C

WA-XX-250BM-500

WK-XX-250BM-15C

EP-08-250BM-500

SA-XX-250BM-500

SK-XX-250BM-15C

SD-DY-250BM-15C

WD-DY-250BM-15C

500 ±0.15%

1500 ±0.3%

500 ±0.3%

1500 ±0.3%

500 ±0.15%

500 ±0.3%

1500 ±0.3%

1500 ±0.6%

A general-purpose gage used primarily to obtain 120-ohm grid resistance

in SK and WK Series.

SK-XX-250BP-120

WK-XX-250BP-120

ED-DY-250BP-120

SD-DY-250BP-120

WD-DY-250BP-120

120 ±0.3%

120 ±0.6%

250BM

0.250 0.375 0.125 0.125

6.35 9.53 3.18 3.18

0.58L x 0.27W 14.7L x 6.9W

250BP

0.250 0.375 0.125 0.125

6.35 9.53 3.18 3.18

0.53L x 0.22W 13.5L x 5.6W

W, E, L, LE, P

E, L*, LE*

High-resistance gage with good power dissipation capability for high-

output applications or use on plastics.

EA-XX-250BK-10C

WA-XX-250BK-10C

WK-XX-250BK-30C

SA-XX-250BK-10C

SK-XX-250BK-30C

1000 ±0.15%

1000 ±0.3%

3000 ±0.3%

1000 ±0.3%

3000 ±0.3%

250BK

0.250 0.430 0.175 0.175

6.35 10.92 4.45 4.45

0.58L x 0.27W 14.7L x 6.9W

W, E, L, LE, P

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

General-purpose gage with solder tab at each end of grid. See also

250EM pattern.

EA-XX-250DM-120

ED-DY-250DM-350

WA-XX-250DM-120

WK-XX-250DM-350

EP-08-250DM-120

SA-XX-250DM-120

SK-XX-250DM-350

SD-DY-250DM-350

WD-DY-250DM-350

120 ±0.15%

350 ±0.3%

120 ±0.3%

350 ±0.3%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.6%

250DM

0.250 0.450 0.250 0.250

6.35 11.43 6.35 6.35

0.61L x 0.35W 15.5L x 8.9W

E, L, LE

E, L*, LE*

0.250 0.290 0.250 0.400

6.35 7.37 6.35 10.16

0.44L x 0.48W 11.2L x 12.2W

120 ±0.15%

350 ±0.3%

120 ±0.3%

350 ±0.3%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.6%

EA-XX-250EM-120

ED-DY-250EM-350

WA-XX-250EM-120

WK-XX-250EM-350

EP-08-250EM-120

SA-XX-250EM-120

SK-XX-250EM-350

SD-DY-250EM-350

WD-DY-250EM-350

General-purpose gage. Similar to 250DM pattern but with tab at each

side of grid.

250EM

E, L, LE

E, L*, LE*

EA-XX-250MQ-350

ED-DY-250MQ-10C

EK-XX-250MQ-10C

WA-XX-250MQ-350

WK-XX-250MQ-10C

SA-XX-250MQ-350

SK-XX-250MQ-10C

SD-DY-250MQ-10C

WD-DY-250MQ-10C

350 ±0.2%

1000 ±0.4%

1000 ±0.2%

350 ±0.3%

1000 ±0.4%

350 ±0.3%

1000 ±0.4%

1000 ±0.8%

Dual pattern for back-to-back bending applications. Longitudinal grid

centerlines are spaced 0.185 in (4.70 mm) apart. See also 250PD

pattern. EK-Series gages are supplied with duplex copper pads (DP)

when optional feature W or SE is not specified.

250MQ

0.250ES 0.375 CP 0.125 ES 0.310 CP

6.35 ES 9.53 CP 3.18 ES 7.87 CP

0.47L x 0.40W 11.9L x 10.2W

W, E, L, LE

E, L*, LE*

W, SE

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

EA-XX-250PD-120

EA-XX-250PD-350

ED-DY-250PD-350

EK-XX-250PD-10C

S2K-XX-250PD-10C

WA-XX-250PD-120

WA-XX-250PD-350

WK-XX-250PD-350

WK-XX-250PD-10C

SA-XX-250PD-120

SA-XX-250PD-350

SK-XX-250PD-350

SK-XX-250PD-10C

SD-DY-250PD-350

WD-DY-250PD-350

120 ±0.2%

350 ±0.2%

350 ±0.4%

1000 ±0.2%

1000 ±0.4%

120 ±0.3%

350 ±0.3%

350 ±0.4%

1000 ±0.4%

120 ±0.4%

350 ±0.4%

1000 ±0.4%

350 ±0.8%

0.250ES 0.358 CP 0.110 ES 0.240 CP

6.35 ES 9.09 CP 2.79 ES 6.10 CP

0.44L x 0.32W 11.2L x 8.1W

250PD

250SD

0.250 0.320 0.120 0.190

6.35 8.13 3.05 4.83

0.45L x 0.30W 11.4L x 7.6W

Dual-element pattern with longitudinal grid centerlines spaced 0.130 in

(3.30 mm) apart. See also 250MQ pattern. EK-Series gages are

supplied with duplex copper pads (DP) when optional feature W or SE

is not specified.

350 ±0.15%

1000 ±0.3%

350 ±0.3%

1000 ±0.3%

350 ±0.15%

350 ±0.3%

1000 ±0.3%

1000 ±0.6%

EA-XX-250SD-350

ED-DY-250SD-10C

WA-XX-250SD-350

WK-XX-250SD-10C

EP-08-250SD-350

SA-XX-250SD-350

SK-XX-250SD-10C

SD-DY-250SD-10C

WD-DY-250SD-10C

General-purpose gage for use near abutments and in restricted areas.

W, E, L, LE

W, SE

W, E, L, LE, P

E, L*, LE*

General-purpose gage with narrow geometry. Exposed solder tab area

0.08 x 0.05 in (2.0 x 1.1 mm). See also 250UW pattern.

CEA-XX-250UN-120

CEA-XX-250UN-350 120 ±0.3%

350 ±0.3%

CEA-Series Strain Gages

feature large copper

solder tabs and a completely

encapsulated grid.

Available with Option P2

(preattached leadwire cables).

0.250 0.415 0.120 0.120

6.35 10.54 3.05 3.05

0.52L x 0.22W 13.2L x 5.6W

250UN ‘C’ FEATURE

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

350DD

375BG

0.350 0.500 0.100 0.100

8.89 12.70 2.54 2.54

0.61L x 0.18W 15.5L x 4.6W

General-purpose gage with narrow pattern geometry and tab at each

end of grid.

General-purpose gage. See also 375UW pattern.

0.375 0.563 0.187 0.187

9.53 14.30 4.75 4.75

0.71L X 0.29W 18.0L x 7.4W

350 ±0.15%

1000 ±0.3%

350 ±0.3%

1000 ±0.3%

350 ±0.15%

350 ±0.3%

1000 ±0.3%

1000 ±0.6%

EA-XX-350DD-350

ED-DY-350DD-10C

WA-XX-350DD-350

WK-XX-350DD-10C

EP-08-350DD-350

SA-XX-350DD-350

SK-XX-350DD-10C

SD-DY-350DD-10C

WD-DY-350DD-10C

120 ±0.15%

350 ±0.3%

120 ±0.3%

350 ±0.3%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.6%

EA-XX-375BG-120

ED-DY-375BG-350

WA-XX-375BG-120

WK-XX-375BG-350

EP-08-375BG-120

SA-XX-375BG-120

SK-XX-375BG-350

SD-DY-375BG-350

WD-DY-375BG-350

E, L, LE

W, E, L, LE, P

E, L*, LE*

General-purpose gage. Exposed solder tab area 0.10 x 0.07 in

(2.5 x 1.8 mm). See also 250UN pattern.

CEA-XX-250UW-120

CEA-XX-250UW-175

CEA-XX-250UW-350

CEA-XX-250UW-10C

120 ±0.3%

175 ±0.3%

350 ±0.3%

1000 ±0.3%

CEA-Series Strain Gages

feature large copper

solder tabs and a completely

encapsulated grid.

Available with Option P2

(preattached leadwire cables).

250UW

0.250 0.450 0.180 0.180

6.35 11.43 4.57 4.57

0.55L x 0.27W 14.0L x 6.9W

‘C’ FEATURE

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

CEA-Series Strain Gages

feature large copper

solder tabs and a completely

encapsulated grid.

Available with Option P2

(preattached leadwire cables).

CEA-XX-375UW-120

CEA-XX-375UW-350

120 ±0.3%

350 ±0.3%

375UW

0.375 0.575 0.180 0.180

9.53 14.61 4.57 4.57

0.67L x 0.27W 17.0L x 6.9W

500AE

0.500 0.850 0.500 0.500

12.70 21.59 12.70 12.70

0.95L x 0.60W 24.1L x 15.2W

EA-XX-500AE-350

ED-DY-500AE-10C

WA-XX-500AE-350

WK-XX-500AE-10C

EP-08-500AE-350

SA-XX-500AE-350

SK-XX-500AE-10C

SD-DY-500AE-10C

WD-DY-500AE-10C

350 ±0.15%

1000 ±0.3%

350 ±0.3%

1000 ±0.3%

350 ±0.15%

350 ±0.3%

1000 ±0.3%

1000 ±0.6%

EA-XX-500AF-120

ED-DY-500AF-350

WA-XX-500AF-120

WK-XX-500AF-350

EP-08-500AF-120

SA-XX-500AF-120

SK-XX-500AF-350

SD-DY-500AF-350

WD-DY-500AF-350

120 ±0.15%

350 ±0.3%

120 ±0.3%

350 ±0.3%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.6%

500AF

0.500 0.830 0.500 0.500

12.70 21.08 12.70 12.70

0.98L x 0.58W 24.9L x 14.7W

Large gage with very high power-dissipation capability. Similar to 500AF

pattern but higher resistance.

General-purpose gage. Exposed solder tab area 0.10 x 0.07 in (2.5 x 1.8

mm).

Large gage with very high power-dissipation capability. See also

500AE pattern.

‘C’ FEATURE

W, E, L, LE, P

E, L*, LE*

W, E, L, LE, P

E, L*, LE*

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

EA-XX-500BC-200

ED-DY-500BC-600

WA-XX-500BC-200

WK-XX-500BC-600

EP-08-500BC-200

SA-XX-500BC-200

SK-XX-500BC-600

SD-DY-500BC-600

WD-DY-500BC-600

Special-resistance version of the 500BH pattern.

0.500 0.710 0.175 0.175

12.70 18.03 4.45 4.45

0.77L x 0.23W 19.6L x 5.8W

500BC

500BH

500BL

0.500 0.720 0.175 0.175

12.70 18.29 4.45 4.45

0.87L x 0.27W 22.1L x 6.9W

0.500 0.720 0.175 0.175

12.70 18.29 4.45 4.45

0.92L x 0.30W 23.4L x 7.6W

Widely used general-purpose gage with compact geometry. See also

500BL and 500UW patterns.

General-purpose gage. Similar to 500BH pattern except for

resistance. See also 500UW pattern.

200 ±0.15%

600 ±0.3%

200 ±0.3%

600 ±0.3%

200 ±0.15%

200 ±0.3%

600 ±0.3%

600 ±0.6%

EA-XX-500BH-120

ED-DY-500BH-350

WA-XX-500BH-120

WK-XX-500BH-350

EP-08-500BH-120

SA-XX-500BH-120

SK-XX-500BH-350

SD-DY-500BH-350

WD-DY-500BH-350

120 ±0.15%

350 ±0.3%

120 ±0.3%

350 ±0.3%

120±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.6%

EA-XX-500BL-350

ED-DY-500BL-10C

WA-XX-500BL-350

WK-XX-500BL-10C

EP-08-500BL-350

SA-XX-500BL-350

SK-XX-500BL-10C

SD-DY-500BL-10C

WD-DY-500BL-10C

350 ±0.15%

1000 ±0.3%

350 ±0.3%

1000 ±0.3%

350 ±0.15%

350 ±0.3%

1000 ±0.3%

1000 ±0.6%

W, E, L, LE, P

E, L*, LE*

W, E, L, LE, P

E, L*, LE*

W, E, L, LE, P

E, L*, LE*

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

500BV

500GA

500GB

Special-resistance variation of the 500BH pattern.

Very narrow gage. Variation of the 500GB pattern, used primarily to

obtain 120-ohm resistance in SK and WK Series.

General-purpose gage with very narrow geometry. See also 500GA

and 500GC patterns.

0.500 0.720 0.175 0.175

12.70 18.29 4.45 4.45

0.82L x 0.27W 20.8L x 6.9W

0.500 0.600 0.016 0.060

12.70 15.24 0.41 1.52

0.73L x 0.15W 18.5L x 3.8W

0.500 0.620 0.060 0.060

12.70 15.75 1.52 1.52

0.75L x 0.15W 19.1L x 3.8W

EA-XX-500BV-100

ED-DY-500BV-300

WA-XX-500BV-100

WK-XX-500BV-300

EP-08-500BV-100

SA-XX-500BV-100

SK-XX-500BV-300

SD-DY-500BV-300

WD-DY-500BV-300

100 ±0.15%

300 ±0.3%

100 ±0.3%

300 ±0.3%

100 ±0.15%

100 ±0.3%

300 ±0.3%

300 ±0.6%

SK-XX-500GA-120

WK-XX-500GA-120

ED-DY-500GA-120

SD-DY-500GA-120

WD-DY-500GA-120

EA-XX-500GA-040

120 ±0.3%

40 ±0.15%

EA-XX-500GB-120

ED-DY-500GB-350

WA-XX-500GB-120

WK-XX-500GB-350

EP-08-500GB-120

SA-XX-500GB-120

SK-XX-500GB-350

SD-DY-500GB-350

WD-DY-500GB-350

120 ±0.15%

350 ±0.3%

120 ±0.3%

350 ±0.3%

120 ±0.15%

120 ±0.3%

350 ±0.3%

350 ±0.6%

W, E, L, LE, P

E, L*, LE*

W*, E, L, LE, P

W*, E, L*, LE*

*Options available but not normally recommended. See Optional Features datasheet for details.

micro-measurements@vishay.com

Linear Patterns

Vishay Micro-Measurements

Document Number: 11508

Revision 26-Aug-03

www.vishaymg.com

General Purpose Strain Gages - Linear Patterns

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

500GC General-purpose gage with very narrow geometry. Similar to the

500GB pattern except for resistance.

0.500 0.620 0.060 0.060

12.70 15.75 1.52 1.52

0.78L x 0.15W 19.8L x 3.8W

EA-XX-500GC-350

ED-DY-500GC-10C

WA-XX-500GC-350

WK-XX-500GC-10C

EP-08-500GC-350

SA-XX-500GC-350

SK-XX-500GC-10C

SD-DY-500GC-10C

WD-DY-500GC-10C

350 ±0.15%

1000 ±0.3%

350 ±0.3%

1000 ±0.3%

350 ±0.15%

350 ±0.3%

1000 ±0.3%

1000 ±0.6%

W*, E, L, LE, P

W*, E, L*, LE*

0.500 0.700 0.180 0.180

12.70 17.78 4.57 4.57

0.80L x 0.27W 20.3L x 6.9W

General-purpose gage. Exposed solder tab area 0.10 x 0.07 in

(2.5 x 1.8mm).

CEA-Series Strain Gages

feature large copper

solder tabs and a completely

encapsulated grid.

Available with Option P2

(preattached leadwire cables).

500UW ‘C’ FEATURE

CEA-XX-500UW-120

CEA-XX-500UW-350 120 ±0.3%

350 ±0.3%

*Options available but not normally recommended. See Optional Features datasheet for details.