FR801 - FR805 FAST RECOVERY
RECTIFIER DIODES
PRV : 50 - 600 Volts
Io : 8.0 Amperes
FEATURES :
* High current capability
* High surge current capability
* High reliability
* Low reverse current
* Low forward voltage drop
* Fast switching for high efficiency
* Pb / RoHS Free
MECHANICAL DATA :
* Case : Epoxy, Molded
* Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
* Polarity: As marked
* Mounting Position: Any
* Weight : 2.24 grams (Approximately)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL FR801 FR802 FR803 FR804 FR805 UNIT
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 V
Maximum RMS Voltage VRMS 35 70 140 280 420 V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 V
Maximum Average Forward Current
Half-Wave Resistive Load Tc = 100 °C
Peak Forward Surge Current
8.3ms Single half sine wave Superimposed
on rated load (JEDEC Method)
Maximum Peak Forward Voltage at IF = 8 A VF1.3 V
Maximum Reverse Current at Tc = 25 °C IR10 μA
Rated DC Blocking Voltage Tc = 100 °C IR(H) 150 μA
Maximum Reverse Recovery Time ( Note 1 ) Trr 150 250 ns
Typical Junction Capacitance( Note 2) CJ70 pF
Operating and Storage Temperature Range TJ, TSTG - 65 to + 175 °C
Notes :
(1) Reverse Recovery Test Conditions : I
F = 0.5 A, IR = 1.0 A, Irr = 0.25 A.
(2) Measured at 1.0MHz and applied reverse voltage of 4.0V.
Page 1 of 2 Rev. 02 : July 28, 2006
A
A
RATING
IFSM
IF(AV) 8.0
150
0.205(520)
0.195(4.95)
0.635(16.13)
0.625(15.87)
0.055(1.39)
0.045(1.14)
0.145(3.68)
0.135(3.43)
0.160(4.06)
0.140(3.56)
0.603(15.32)
0.573(14.55)
0.560(14.22)
0.530(13.46)
0.350(8.89)
0.330(8.39)
0.185(4.70)
0.175(4.44)
0.037(0.94)
0.027(0.68)
0.415(10.54)MAX.
0.154(3.91)DIA.
0.148(3.74)
0.113(2.87)
0.103(2.62)
PIN 1
PIN 2
CASE
0.022(0.56)
0.014(0.36)
12
TO-220AC
Dimensions in inches and ( millimeters )
Certificate TH97/10561QM Certificate TW00/17276EM
RATING AND CHARACTERISTIC CURVES ( FR801 - FR805 )
FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
+
NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF.
2. Rise time = 10 ns max., Source Impedance = 50 ohms.
3. All Resistors = Non-inductive Types.
FIG.2 - FORWARD CURRENT DERATING CURVE FIG.3 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
0 25 50 75 100 125 150 175 1 2 4 6 10 20 40 60 100
CASE TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz
FIG.4 - TYPICAL INSTANTANEOUS FORWARD FIG.5 - TYPICAL REVERSE CHARACTERISTICS
CHARACTERISTICS
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
Page 2 of 2 Rev. 02 : July 28, 2006
60Hz Resistive load
or Inductive load
8
6
4
2
1
0
100 10
1.0
120
0
150
0
90
60
30
10
80
0.1 0.01
1
0.1
100 1400 20 40 60 120
PERCENT OF RATED REVERSE
VOLTAGE, (%)
PEAK FORWARD SURGE
CURRENT, (A)
AVERAGE FORWARD
CURRENT, (A)
INSTANTANEOUS FORWARD
CURRENT, (A)
INSTANTANEOUS REVERSE
CURRENT, (μA)
8.3 ms Single Half Sine Wave
JEDEC Method
SET TIME BASE FOR 50/100 ns/cm
Trr
+ 0.5 A
0
- 0.25 A
- 1.0 A
1 cm
50 Vdc
(approx)
OSCILLOSCOPE
( NOTE 1 )
1 Ω
50 Ω10 Ω
D.U.T.
PULSE
GENERATOR
( NOTE 2 )
INSTANTANEOUS FORWARD
VOLTAGE, (V)
Certificate TH97/10561QM Certificate TW00/17276EM
