PGSMAJ10CA E3G - TAIWAN SEMICONDUCTOR MANUFACTURING

PGSMAJ10A - PGSMAJ100A

Taiwan Semiconductor

1 Version:B1805

400W, 10V - 100V Surface Mount Transient Voltage Suppressor

FEATURES

● AEC-Q101 qualified

● Low profile package

● Photo Glass passivated junction

● Excellent clamping capability

● Moisture sensitivity level: level 1, per J-STD-020

● 400 watts peak pulse power capability with a 10 / 1000 μs

waveform (300W above 78V)

● Compliant to RoHS directive 2011/65/EU and

in accordance to WEEE 2002/96/EC

● Halogen-free according to IEC 61249-2-21

APPLICATIONS

● Switching mode power supply (SMPS)

● Adapters

● Lighting application

● On-board DC/DC converter

MECHANICAL DATA

● Case: DO-214AC (SMA)

●Molding compound meets UL 94V-0 flammability rating

● Terminal: Matte tin plated leads, solderable per J-STD-002

● Meet JESD 201 class 2 whisker test

● Polarity: As marked

● Weight: 0.06 g (approximately)

KEY PARAMETERS

PARAMETER VALUE UNIT

VWM 10 - 100 V

VBR 11.7 - 117 V

TJ MAX 175 °C

Package DO-214AC (SMA)

Configuration Single die

DO-214AC (SMA)

ABSOLUTE MAXIMUM RATINGS

(TA = 25°C unless otherwise noted)

PARAMETER SYMBOL VALUE UNIT

Peak power dissipation (Note 1) PPPM 400 W

Steady state power dissipation PD 1 W

Peak forward surge current, 8.3 ms single half sine-wave

superimposed on rated load IFSM 40 A

Maximum instantaneous forward voltage at 25 A for

unidirectional only VF 3.5 V

Operating junction temperature range TJ -55 to +175 °C

Storage temperature range TSTG -55 to +175 °C

Notes:

1. Non-repetitive Current Pulse Per Fig.3 and derated above TA=25°C Per Fig.2. Rating is 300 W for VWM > 78 V

Devices for Bi-directional Applications

1. For Bi-directional use CA suffix (e.g. PGSMAJ10CA).

2. Electrical Characteristics Apply in Both Directions

Not Recommended

PGSMAJ10A - PGSMAJ100A

Taiwan Semiconductor

2 Version:B1805

THERMAL PERFORMANCE

PARAMETER SYMBOL TYP. UNIT

Junction-to-lead thermal resistance per diode RӨJL 29 °C/W

Junction-to-ambient thermal resistance per diode RӨJA 120 °C/W

Junction-to-case thermal resistance per diode RӨJC 31 °C/W

Thermal Performance Note: Units mounted on PCB (5mm x 5mm Cu pad test board)

ELECTRICAL SPECIFICATIONS

(TA = 25°C unless otherwise noted)

Part number Marking

code

Breakdown

voltage

VBR@IT

(V)

(Note 1)

Test current

IT

(mA)

Working

stand-off

voltage

VWM

(V)

Maximum reverse

leakage current

IR@VWM

(µA)

(Note 1)

Maximum peak

impulse current

IPPM (A)

tp =10/1000 μs

Maximum clamping

voltage

VC@IPPM (V)

tp =10/1000 μs

Min. Max.

PGSMAJ10A PAX 11.1 12.30 1 10 5 23.5 17.0

PGSMAJ11A PAZ 12.2 13.50 1 11 1 22.0 18.2

PGSMAJ12A PBE 13.3 14.70 1 12 1 20.1 19.9

PGSMAJ13A PBG 14.4 15.90 1 13 1 18.6 21.5

PGSMAJ14A PBK 15.6 17.20 1 14 1 17.2 23.2

PGSMAJ15A PBM 16.7 18.50 1 15 1 16.4 24.4

PGSMAJ16A PBP 17.8 19.70 1 16 1 15.4 26.0

PGSMAJ17A PBR 18.9 20.90 1 17 1 14.5 27.6

PGSMAJ18A PBT 20.0 22.10 1 18 1 13.7 29.2

PGSMAJ20A PBV 22.2 24.50 1 20 1 12.3 32.4

PGSMAJ22A PBX 24.4 26.90 1 22 1 11.3 35.5

PGSMAJ24A PBZ 26.7 29.50 1 24 1 10.3 38.9

PGSMAJ26A PCE 28.9 31.90 1 26 1 9.5 42.1

PGSMAJ28A PCG 31.1 34.40 1 28 1 8.8 45.4

PGSMAJ30A PCK 33.3 36.8 1 30 1 8.3 48.4

PGSMAJ33A PCM 36.7 40.6 1 33 1 7.5 53.3

PGSMAJ36A PCP 40.0 44.2 1 36 1 6.9 58.1

PGSMAJ40A PCR 44.4 49.1 1 40 1 6.2 64.5

PGSMAJ43A PCT 47.8 52.8 1 43 1 5.8 69.4

PGSMAJ45A PCV 50.0 55.3 1 45 1 5.5 72.7

PGSMAJ48A PCX 53.3 58.9 1 48 1 5.2 77.4

PGSMAJ51A PCZ 56.7 62.7 1 51 1 4.9 82.4

PGSMAJ54A PRE 60.0 66.3 1 54 1 4.6 87.1

PGSMAJ58A PRG 64.4 71.2 1 58 1 4.3 93.6

PGSMAJ60A PRK 66.7 73.7 1 60 1 4.1 96.8

PGSMAJ64A PRM 71.1 78.6 1 64 1 3.9 103

PGSMAJ70A PRP 77.8 86 1 70 1 3.5 113

PGSMAJ75A PRR 83.3 92.1 1 75 1 3.3 121

PGSMAJ78A PRT 86.7 95.8 1 78 1 3.2 126

PGSMAJ85A PRV 94.4 104 1 85 1 2.2 137

PGSMAJ90A PRX 100 111 1 90 1 2.1 146

PGSMAJ100A

PRZ 111 123 1 100 1 1.9 162

Notes:

1. Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2

2. Mounted on 5 x 5mm copper pads to each terminal

3. Lead temperature at TL=75°C

4. Measure on 8.3ms single half sine-wave duty cycle=4 pulses per minutes maximum

5. Peak pulse power waveform is 10/1000 μs

Not Recommended

PGSMAJ10A - PGSMAJ100A

Taiwan Semiconductor

3 Version:B1805

ORDERING INFORMATION

ORDERING CODE

(Note 1) PACKAGE PACKING

PGSMAJxxxAHE3G Clip SMA 1,800 / 7” Plastic reel

PGSMAJxxxAHE2G Clip SMA 7,500 / 13” Plastic reel

PGSMAJxxxA E3G Clip SMA 1,800 / 7” Plastic reel

PGSMAJxxxA E2G Clip SMA 7,500 / 13” Plastic reel

PGSMAJxxxCAHE3G Clip SMA 1,800 / 7” Plastic reel

PGSMAJxxxCAHE2G Clip SMA 7,500 / 13” Plastic reel

PGSMAJxxxCA E3G Clip SMA 1,800 / 7” Plastic reel

PGSMAJxxxCA E2G Clip SMA 7,500 / 13” Plastic reel

PGSMAJxxxA R3G SMA 1,800 / 7” Plastic reel

PGSMAJxxxAHR3G SMA 1,800 / 7” Plastic reel

PGSMAJxxxA M2G SMA 7,500 / 13” Plastic reel

PGSMAJxxxAHM2G SMA 7,500 / 13” Plastic reel

Note 1:

"xxx" defines voltage from 10V (PGSMAJ10A) to 100V (PGSMAJ100A)

Not Recommended

PGSMAJ10A - PGSMAJ100A

Taiwan Semiconductor

4 Version:B1805

CHARACTERISTICS CURVES

(TA = 25°C unless otherwise noted)

Fig.1 Peak Pulse Power Rating Curve

Fig.2 Pulse Derating Curve

Fig.3 Clamping Power Pulse Waveform

Fig.4 Typical Junction Capacitance

0.1

1

10

100

0 1 10 100 1000 10000

PPPM, PEAK PULSE POWER (KW)

td- PULSE WIDTH (μs)

Non-Repetitive Pulse

Waveform Shown in Fig.3

TA=25°C

PGSMAJ10A - PGSMAJ78A

PGSMAJ85A - PGSMAJ100A

0

20

40

60

80

100

120

140

0 0.5 1 1.5 2 2.5 3

t, TIME (ms)

td

Peak value

IPPM

Rise time tr=10μs to 100%

Half value-IPPM/2

10/1000μs, waveform

as defined by R.E.A.

Pulse width(td) is defined

as the point where the peak

current decays to 50% of IPPM

PEAK PULSE CURRENT (%)

1

10

100

1000

1 10 100

REVERSE VOLTAGE (V)

f=1.0MHz

Vsig=50mVp-p

PGSMAJ40A

PGSMAJ10A

CAPACITANCE (pF)

0

25

50

75

100

0 25 50 75 100 125 150 175

TJ- INITIAL JUNCTION TEMPERATURE (°C)

PEAK PULSE POWER (PPPM) OR CURRENT(IPP)

DERATING IN PERCENTAGE (%)

Not Recommended

PGSMAJ10A - PGSMAJ100A

Taiwan Semiconductor

5 Version:B1805

PACKAGE OUTLINE DIMENSIONS

DO-214AC (SMA)

SUGGESTED PAD LAYOUT

MARKING DIAGRAM

P/N = Marking Code

G = Green Compound

YW = Date Code

F = Factory Code

DIM Unit (mm) Unit (inch)

Min Max Min Max

A 1.27 1.58 0.050 0.062

B 4.06 4.60 0.160 0.181

C 2.29 2.83 0.090 0.111

D 1.99 2.50 0.078 0.098

E 0.90 1.41 0.035 0.056

F 4.95 5.33 0.195 0.210

G 0.10 0.20 0.004 0.008

H 0.15 0.31 0.006 0.012

Symbol

Unit (mm) Unit (inch)

A 1.68 0.066

B 1.52 0.060

C 3.93 0.155

D 2.41 0.095

E 5.45 0.215

Not Recommended

PGSMAJ10A - PGSMAJ100A

Taiwan Semiconductor

6 Version:B1805

Notice

Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf,

assumes no responsibility or liability for any errors or inaccuracies.

Information contained herein is intended to provide a product description only. No license, express or implied, to

any intellectual property rights is granted by this document. Except as provided in TSC’s terms and conditions of

sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty,

relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose,

merchantability, or infringement of any patent, copyright, or other intellectual property right.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.

Customers using or selling these products for use in such applications do so at their own risk and agree to fully

indemnify TSC for any damages resulting from such improper use or sale.

Not Recommended