Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M 8-Pin DIP High Speed Transistor Optocouplers Features Description * * * * The 6N135M, 6N136M, HCPL4503M, HCPL2530M, and HCPL2531M optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor for each channel. High Speed - 1 MBit/s Dual-Channel: HCPL2530M, HCPL2531M CTR Guaranteed 0C to 70C No Base Connection for Improved Noise Immunity (HCPL4503M) * Superior CMR of 15,000 V/s Minimum (HCPL4503M) * Safety and Regulatory Approvals - UL1577, 5,000 VACRMS for 1 Minute - DIN EN/IEC60747-5-5 Applications * * * * The HCPL4503M has no internal connection to the phototransistor base for improved noise immunity. An internal noise shield provides superior common mode rejection of up to 50,000 V/s. Related Resources Line Receivers Pulse Transformer Replacement Output Interface to CMOS-LSTTL-TTL Wide-Bandwidth Analog Coupling * * * * Schematics N/C 1 A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. www.fairchildsemi.com/products/optoelectronics/ www.fairchildsemi.com/pf/HC/HCPL0500.html www.fairchildsemi.com/pf/FO/FODM452.html www.fairchildsemi.com/pf/FO/FOD050L.html Package Outlines 8 VCC + 1 8 VCC 8 8 1 1 V F1 + 2 7 VB _ 2 7 V01 3 6 V02 V F _ 3 6 VO _ 8 V F2 N/C 4 5 GND 6N135M, 6N136M, HCPL4503M + 4 8 1 1 Figure 2. Package Outlines 5 GND HCPL2530M, HCPL2531M Pin 7 is not connected in the HCPL4503M Figure 1. Schematics (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers January 2016 As per DIN EN/IEC 60747-5-5, this optocoupler is suitable for "safe electrical insulation" only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. Parameter Installation Classifications per DIN VDE 0110/1.89 Table 1, For Rated Mains Voltage Characteristics < 150 VRMS I-IV < 300 VRMS I-IV < 450 VRMS I-III < 600 VRMS I-III Climatic Classification 40/100/21 Pollution Degree (DIN VDE 0110/1.89) 2 Comparative Tracking Index Symbol VPR 175 Parameter Value Unit Input-to-Output Test Voltage, Method A, VIORM x 1.6 = VPR, Type and Sample Test with tm = 10 s, Partial Discharge < 5 pC 1,335 Vpeak Input-to-Output Test Voltage, Method B, VIORM x 1.875 = VPR, 100% Production Test with tm = 1 s, Partial Discharge < 5 pC 1,669 Vpeak 890 Vpeak VIORM Maximum Working Insulation Voltage VIOTM Highest Allowable Over-Voltage 6,000 Vpeak External Creepage 8.0 mm External Clearance External Clearance (for Option TV, 0.4" Lead Spacing) DTI TS IS,INPUT PS,OUTPUT RIO 7.4 mm 10.16 mm 0.5 mm Case Temperature(1) 150 C Input Current(1) 200 mA 300 mW > 109 Distance Through Insulation (Insulation Thickness) Output Power (Duty Factor 2.7%)(1) Insulation Resistance at TS, VIO = 500 V(1) Note: 1. Safety limit value - maximum values allowed in the event of a failure. (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 2 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Safety and Insulation Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. TA = 25C unless otherwise specified. Symbol Parameter Test Conditions Value Unit TSTG Storage Temperature -40 to +125 C TOPR Operating Temperature -40 to +100 C TJ TSOL Junction Temperature Lead Solder Temperature -40 to +125 C 260 for 10 sec C 25 mA 50 mA 1.0 A 5 V 45 mW EMITTER IF (avg) IF (pk) IF (trans) VR PD DC/Average Forward Input Current Each Channel(2) 50% Duty Cycle, 1 ms P.W. Peak Forward Input Current Each Channel(3) Peak Transient Input Current Each Channel 1 s P.W., 300 pps Reverse Input Voltage Each Channel Input Power Dissipation Each Channel(4) DETECTOR IO (avg) Average Output Current Each Channel 8 mA IO (pk) Peak Output Current Each Channel 16 mA VEBR Emitter-Base Reverse Voltage 5 V VCC Supply Voltage -0.5 to 30 V VO Output Voltage IB Base Current PD Output Power Dissipation Each Channel(5) 6N135M and 6N136M 6N135M and 6N136M -0.5 to 20 V 5 mA 100 mW Notes: 2. Derate linearly above 70C free-air temperature at a rate of 0.8 mA/C. 3. Derate linearly above 70C free-air temperature at a rate of 1.6 mA/C. 4. Derate linearly above 70C free-air temperature at a rate of 0.9 mW/C. 5. Derate linearly above 70C free-air temperature at a rate of 2.0 mW/C. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC Parameter Supply Voltage Min. Max. Unit 4.5 20.0 V TA Ambient Operating Temperature 0 70 C IFL Input Current, Low Level 0 250 A IFH Input Current, High Level(6) 6.3 20.0 mA Note: 6. 6.3 mA is a guard banded value which allows for at least 20% CTR degradation. Initial input current threshold value is 5.0 mA or less. (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 3 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Absolute Maximum Ratings VCC = 5.0 V, TA = 0C to 70C unless otherwise specified. Individual Component Characteristics Symbol Parameter Device Test Conditions Min. Typ. Max. 1.45 1.70 Unit EMITTER VF BVR VF/TA All IF = 16 mA, TA = 25C All IF = 16 mA All IR = 10 A Temperature Coefficient All of Forward Voltage IF = 16 mA Input Forward Voltage Input Reverse Breakdown Voltage 1.80 5 V 21 V -1.7 mV/C DETECTOR IF = 0 mA, VO = VCC = 5.5 V, TA = 25C 0.0007 0.5 6N135M, IF = 0 mA, VO = VCC = 15 V, 6N136M, TA = 25C HCPL4503M 0.0019 1 All IOH Logic High Output Current All ICCL ICCH Logic Low Supply Current Logic High Supply Current IF = 0 mA, VO = VCC = 15 V 6N135M, IF = 16 mA, VO = Open, 6N136M, VCC = 15 V HCPL4503M HCPL2530M, IF1 = IF2 = 16 mA, HCPL2531M VO = Open, VCC = 15 V 6N135M, IF = 0 mA, VO = Open, 6N136M, VCC = 15 V HCPL4503M HCPL2530M, IF = 0 mA, VO = Open, HCPL2531M VCC = 15 V (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 A 50 163 200 A 400 0.0004 2 A 4 www.fairchildsemi.com 4 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Electrical Characteristics TA = 0C to 70C unless otherwise specified. Transfer Characteristics Symbol Parameter Device Test Conditions Min. Typ. Max. Unit 7 38 50 % 19 38 50 % COUPLED 6N135M, HCPL2530M CTR Current Transfer Ratio(7) 6N136M, HCPL4503M, HCPL2531M IF = 16 mA, VO = 0.4 V, VCC = 4.5 V, TA = 25C 6N135M VOL = 0.4 V HCPL2530M VOL = 0.5 V IF = 16 mA, 6N136M, VCC = 4.5 V HCPL4503M HCPL2531M VOL = 0.4 V VOL % 15 % VOL = 0.5 V 6N135M Logic LOW Output Voltage 5 IF = 16 mA, IO = 1.1 mA, HCPL2530M VCC = 4.5 V, TA = 25C 0.12 6N136M, HCPL4503M IF = 16 mA, IO = 3 mA, VCC = 4.5 V, TA = 25C HCPL2531M 0.20 6N135M, IF = 16 mA, IO = 0.8 mA, HCPL2530M VCC = 4.5 V HCPL4503M, IF = 16 mA, IO = 2.4 mA, HCPL2531M VCC = 4.5 V 0.4 0.5 0.4 0.5 0.11 0.5 0.18 0.5 V Note: 7. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%. (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 5 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Electrical Characteristics (continued) TA = 0C to 70C unless otherwise specified. Switching Characteristics Symbol Parameter Device Test Conditions Max. Unit 1.5 s 0.8 s 6N135M, RL = 4.1 k, IF = 16 mA(8) HCPL2530M (Figure 15) 2.0 s 6N136M, R = 1.9 k, IF = 16 mA(9) HCPL4503M, L (Figure 15) HCPL2531M 1.0 s 1.5 s 0.8 s 2.0 s 1.0 s 6N135M TA = 25C, RL = 4.1 k, (8) HCPL2530M IF = 16 mA (Figure 15) tPHL Propagation Delay Time to Logic LOW 6N136M, RL = 1.9 k, HCPL4503M TA = 25C, (9) IF = 16 mA (Figure 15) HCPL2531M 6N135M TA = 25C, RL = 4.1 k, (8) I HCPL2530M F = 16 mA (Figure 15) tPLH Propagation Delay Time to Logic HIGH 6N136M, RL = 1.9 k, HCPL4503M TA = 25C, (9) IF = 16 mA (Figure 15) HCPL2531M 6N135M, RL = 4.1 k, IF = 16 HCPL2530M (Figure 15) Min. Typ. 0.23 0.25 0.25 0.28 0.45 0.29 0.26 0.18 mA(8) 6N136M, R = 1.9 k, IF = 16 mA(9) HCPL4503M, L (Figure 15) HCPL2531M |CMH| Common Mode Transient Immunity at Logic High IF = 0 mA, VCM = 10 VP-P, 6N135M, RL = 4.1 k, TA = 25C(10) HCPL2530M (Figure 16) 10,000 IF = 0 mA, VCM = 10 VP-P, 6N136M, RL = 1.9 k, TA = 25C(10) HCPL2531M (Figure 16) 10,000 V/s IF = 0 mA, VCM = 1,500 VP-P, HCPL4503M RL = 4.1 k, TA = 25C(10) 15,000 50,000 (Figure 16) |CML| Common Mode Transient Immunity at Logic Low IF = 16 mA, VCM = 10 VP-P, 6N135M, RL = 4.1 k, TA = 25C(10) HCPL2530M (Figure 16) 10,000 IF = 16 mA, VCM = 10 VP-P, 6N136M, RL = 1.9 k(10) HCPL2531M (Figure 16) 10,000 V/s IF = 0 mA, VCM = 1,500 VP-P, HCPL4503M RL = 4.1 k, TA = 25C(10) 15,000 50,000 (Figure 16) Notes: 8. The 4.1 k load represents 1 LSTTL unit load of 0.36 mA and 6.1 k pull-up resistor. 9. The 1.9 k load represents 1 TTL unit load of 1.6 mA and 5.6 k pull-up resistor. 10. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic high state (i.e., VO > 2.0 V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO < 0.8 V). (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 6 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Electrical Characteristics (continued) Symbol Parameter Device Test Conditions Min. 5,000 VISO Withstand Isolation Test Voltage All RH 50%, II-O 10 A t = 1 minute, f = 50 Hz(11)(13) RI-O Resistance (Input to Output) All VI-O = 500 VDC(11) CI-O Capacitance (Input to Output) All f = 1 MHz, VI-O = 0 VDC(11) II-I Input-Input Insulation Leakage Current RI-I CI-I Typ. Max. Unit VACRMS 1011 1 pF HCPL2530M, RH 45%, HCPL2531M VI-I = 500 VDC, t = 5 s(12) <1 nA Input-Input Resistance HCPL2530M, VI-I = 500 VDC(12) HCPL2531M 1012 Input-Input Capacitance HCPL2530M, f = 1 MHz(12) HCPL2531M 0.2 pF Notes: 11. Device is considered a two terminal device: pins 1, 2, 3 and 4 are shorted together and pins 5, 6, 7 and 8 are shorted together. 12. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together. 13. 5000 VRMS for 1 minute duration is equivalent to 6000 VRMS for 1 second duration. (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 7 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Isolation Characteristics (TA = 25C unless otherwise specified.) CTR (NORMALIZED) CTR(TA) / CTR (TA = 16 mA) CTR (NORMALIZED) CTR(IF) / CTR (IF = 16 mA) For single-channel devices; 6N135M, 6N136M, and HCPL4503M. 1.6 1.4 1.2 1.0 0.8 0.6 VO = 0.4 V VCC = 5 V TA = 25C Normalized to: IF = 16 mA 0.4 0.2 0.0 0.1 1 10 100 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -40 -20 0 IF - FORWARD CURRENT (mA) IOH - LOGIC HIGH OUTPUT CURRENT (nA) IO - OUTPUT CURRENT (mA) IF = 40 mA 20 35 mA 30 mA 15 25 mA 20 mA 10 15 mA 10 mA 5 5 mA 0 2 4 6 8 10 12 40 60 80 100 120 Figure 4. Normalized CTR vs. Temperature 25 0 20 TA - TEMPERATURE (C) Figure 3. Normalized CTR vs. Forward Current TA = 25C VCC = 5 V IF = 16mA VCC = 4.5V VO = 0.4V Normalized to: TA = 25C 14 16 18 1000 IF = 0 mA VCC = 5.5 V VO = 5.5 V 100 10 1 0.1 -40 20 -20 0 20 40 60 80 100 120 TA - TEMPERATURE (C) VO - OUTPUT VOLTAGE (V) Figure 5. Output Current vs. Output Voltage Figure 6. Logic High Output Current vs. Temperature 800 Frequency = 10 kHz Duty Cycle = 10% VCC = 5 V RL = 4.1 k (tPLH) TP - PROPAGATION DELAY (ns) tP - PROPAGATION DELAY (ns) 700 600 500 RL = 1.9 k (tPLH) 400 RL = 1.9 k (tPHL) 300 RL = 4.1 k (tPHL) 200 100 0 -40 Frequency = 10 kHz Duty Cycle = 10% VCC = 5 V 1000 IF = 16 mA (tPLH) IF = 10 mA (tPLH) IF = 10 mA (tPHL) IF = 16 mA (tPHL) 100 -20 0 20 40 60 80 100 120 1 TA - TEMPERATURE (C) Figure 8. Propagation Delay vs. Load Resistance Figure 7. Propagation Delay vs. Temperature (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 10 RL - LOAD RESISTANCE (k) www.fairchildsemi.com 8 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Typical Performance Curves CTR (NORMALIZED) CTR(TA) / CTR (TA = 25C) CTR (NORMALIZED) CTR(IF) / CTR (IF = 16 mA) For dual-channel devices; HCPL2530M and HCPL2531M. 1.6 1.4 1.2 1.0 0.8 0.6 VO = 0.4 V VCC = 5 V TA = 25C Normalized to: IF = 16 mA 0.4 0.2 0.0 0.1 1 10 100 0.8 0.6 0.4 IF = 16 mA VCC = 4.5 V VO = 0.4 V Normalized to: TA = 25C 0.2 0.0 -40 -20 0 20 40 60 80 100 TA - TEMPERATURE (C) Figure 9. Normalized CTR vs. Forward Current Figure 10. Normalized CTR vs. Temperature IOH - LOGIC HIGH OUTPUT CURRENT (nA) TA = 25C VCC = 5 V IO - OUTPUT CURRENT (mA) 1.0 IF - FORWARD CURRENT (mA) 20 15 IF = 40 mA 35 mA 30 mA 10 25 mA 20 mA 15 mA 5 10 mA 5 mA 2 4 6 8 10 12 14 16 18 20 120 1000 IF = 0 mA VCC = 5.5 V VO = 5.5 V 100 10 1 0.1 -40 0 0 1.2 -20 0 20 40 60 80 100 120 TA - TEMPERATURE (C) VO - OUTPUT VOLTAGE (V) Figure 12. Logic High Output Current vs. Temperature Figure 11. Output Current vs. Output Voltage 500 Frequency = 10 kHz Duty Cycle = 10% VCC = 5 V TP - PROPAGATION DELAY (ns) tP - PROPAGATION DELAY (ns) 600 RL = 4.1 k (tPLH) 400 RL = 1.9 k (tPHL) 300 RL = 1.9 k (tPLH) 200 RL = 4.1 k (tPHL) 100 0 -40 Frequency = 10 kHz Duty Cycle = 10% VCC = 5 V TA = 25C 1000 IF = 10 mA (tPHL) IF = 16 mA (tPHL) IF = 16 mA (tPLH) IF = 10 mA (tPLH) 100 -20 0 20 40 60 80 100 120 1 TA - TEMPERATURE (C) Figure 14. Propagation Delay vs. Load Resistance Figure 13. Propagation Delay vs. Temperature (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 10 RL - LOAD RESISTANCE (k) www.fairchildsemi.com 9 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Typical Performance Curves (Continued) Pulse Generator I F tr = 5ns Z O = 50 10% D.C. I/f < 100 s 1 Noise Shield 8 + 2 7 VF - 3 6 VCC Pulse Generator tr = 5 ns Z O = 50 +5 V VB 10% DUTY CYCLE I/f < 100 S RL VO I F Monitor 4 5 IF MONITOR 1 8 VCC +5 V RL VF1 - 2 7 V01 VO C L = 15 pF 3 6 4 5 VF2 + Rm C L = 15 pF GND Noise Shield + - VO 0.1 F Rm IF V02 0.1 F GND Test Circuit for HCPL2530M and HCPL2531M Test Circuit for 6N135M, 6N136M, and HCPL4503M IF 0 5V VO 1.5 V 1.5 V VOL TPHL TPLH Figure 15. Switching Time Test Circuit IF 1 Noise Shield 8 + 2 A B 7 VCC + +5 V IF VB VF1 - RL Noise Shield 1 8 VCC +5 V RL 2 7 3 6 4 5 V01 VO A VF - 3 6 VO B VO VFF 0.1 F VFF 4 5 + GND VF2 + - V02 0.1 F GND VCM - + Pulse Gen VCM - Pulse Gen Test Circuit for HCPL2530M and HCPL2531M Test Circuit for 6N135M, 6N136M, and HCPL4503M VCM 10 V 0V 90% 90% 10% 10% tr tf VO 5V Switch at A : IF = 0 mA VO VOL Switch at A : IF = 16 mA Figure 16. Common Mode Immunity Test Circuit (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 10 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Test Circuits Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Reflow Profile TP Temperature (C) 260 240 TL 220 200 180 160 140 120 100 80 60 40 20 0 Maximum Ramp-up Rate = 3C/S Maximum Ramp-down Rate = 6C/S tP Tsmax tL Preheat Area Tsmin ts 240 120 360 Time 25C to Peak Time (seconds) Profile Freature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150C Temperature Max. (Tsmax) 200C Time (tS) from (Tsmin to Tsmax) 60 to 120 s Ramp-up Rate (tL to tP) 3C/second maximum Liquidous Temperature (TL) 217C Time (tL) Maintained Above (TL) 60 to 150 s Peak Body Package Temperature 260C +0C / -5C Time (tP) within 5C of 260C 30 s Ramp-down Rate (TP to TL) 6C/s maximum Time 25C to Peak Temperature 8 minutes maximum Figure 17. Relow Profile (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 11 Part Number Package Packing Method 6N135M DIP 8-Pin Tube (50 units per tube) 6N135SM SMT 8-Pin (Lead Bend) Tube (50 units per tube) 6N135SDM SMT 8-Pin (Lead Bend) Tape and Reel (1,000 units per reel) 6N135VM DIP 8-Pin, DIN EN/IEC 60747-5-5 Option Tube (50 units per tube) 6N135SVM SMT 8-Pin (Lead Bend), DIN EN/IEC 60747-5-5 Option Tube (50 units per tube) 6N135SDVM SMT 8-Pin (Lead Bend), DIN EN/IEC 60747-5-5 Option Tape and Reel (1,000 units per reel) 6N135TVM DIP 8-Pin, 0.4" Lead Spacing, DIN EN/IEC 60747-5-5 Option Tube (50 units per tube) 6N135TSVM SMT 8-Pin, 0.4" Lead Spacing, DIN EN/IEC 60747-5-5 Option Tube (50 units per tube) 6N135TSR2VM SMT 8-Pin, 0.4" Lead Spacing, DIN EN/IEC 60747-5-5 Option Tape and Reel (1,000 units per reel) Note: The product orderable part number system listed in this table also applies to the 6N136M, HCPL4503M, HCPL2530M, and HCPL2531M product families. Marking Information 1 V 3 6N135 2 XX YY B 6 5 4 Figure 14. Top Mark Definitions 1 Fairchild Logo 2 Device Number 3 DIN EN/IEC60747-5-5 Option (only appears on component ordered with this option) 4 Two Digit Year Code, e.g., `15' 5 Two Digit Work Week Ranging from `01' to `53' 6 Assembly Package Code (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 12 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Ordering Information D0 P0 t K0 P2 E F A0 W1 d t P User Direction of Feed Symbol W W B0 Description D1 Dimension in mm Tape Width 16.0 0.3 Tape Thickness 0.30 0.05 P0 Sprocket Hole Pitch 4.0 0.1 D0 Sprocket Hole Diameter 1.55 0.05 E Sprocket Hole Location 1.75 0.10 F Pocket Location 7.5 0.1 2.0 0.1 P2 P Pocket Pitch A0 Pocket Dimensions 12.0 0.1 10.30 0.20 B0 10.30 0.20 K0 4.90 0.20 W1 d R Cover Tape Width 13.2 0.2 Cover Tape Thickness 0.1 Maximum Maximum Component Rotation or Tilt 10 Minimum Bending Radius 30 (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 13 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Carrier Tape Specifications (Option SD) D0 P0 t K0 P2 E F A0 W1 d P User Direction of Feed Symbol W Description D1 Dimension in mm Tape Width 24.0 0.3 Tape Thickness 0.40 0.1 P0 Sprocket Hole Pitch 4.0 0.1 D0 Sprocket Hole Diameter 1.55 0.05 E Sprocket Hole Location 1.75 0.10 F Pocket Location 11.5 0.1 t 2.0 0.1 P2 P Pocket Pitch 16.0 0.1 A0 Pocket Dimensions 12.80 0.1 B0 10.35 0.1 K0 5.7 0.1 W1 d R Cover Tape Width 21.0 0.1 Cover Tape Thickness 0.1 Maximum Maximum Component Rotation or Tilt 10 Minimum Bending Radius 30 (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 W B0 www.fairchildsemi.com 14 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Carrier Tape Specifications (Option TSR2) TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. F-PFS FRFET(R) SM Global Power Resource GreenBridge Green FPS Green FPS e-Series Gmax GTO IntelliMAX ISOPLANAR Making Small Speakers Sound Louder and BetterTM MegaBuck MICROCOUPLER MicroFET MicroPak MicroPak2 MillerDrive MotionMax MotionGrid(R) MTi(R) MTx(R) MVN(R) mWSaver(R) OptoHiT OPTOLOGIC(R) AccuPower AttitudeEngineTM Awinda(R) AX-CAP(R)* BitSiC Build it Now CorePLUS CorePOWER CROSSVOLT CTL Current Transfer Logic DEUXPEED(R) Dual CoolTM EcoSPARK(R) EfficientMax ESBC (R) (R) Fairchild Fairchild Semiconductor(R) FACT Quiet Series FACT(R) FastvCore FETBench FPS OPTOPLANAR(R) (R) Power Supply WebDesigner PowerTrench(R) PowerXSTM Programmable Active Droop QFET(R) QS Quiet Series RapidConfigure Saving our world, 1mW/W/kW at a timeTM SignalWise SmartMax SMART START Solutions for Your Success SPM(R) STEALTH SuperFET(R) SuperSOT-3 SuperSOT-6 SuperSOT-8 SupreMOS(R) SyncFET Sync-LockTM (R)* TinyBoost(R) TinyBuck(R) TinyCalc TinyLogic(R) TINYOPTO TinyPower TinyPWM TinyWire TranSiC TriFault Detect TRUECURRENT(R)* SerDes UHC(R) Ultra FRFET UniFET VCX VisualMax VoltagePlus XSTM XsensTM (R) * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR WEBSITE AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. AUTHORIZED USE Unless otherwise specified in this data sheet, this product is a standard commercial product and is not intended for use in applications that require extraordinary levels of quality and reliability. This product may not be used in the following applications, unless specifically approved in writing by a Fairchild officer: (1) automotive or other transportation, (2) military/aerospace, (3) any safety critical application - including life critical medical equipment - where the failure of the Fairchild product reasonably would be expected to result in personal injury, death or property damage. Customer's use of this product is subject to agreement of this Authorized Use policy. In the event of an unauthorized use of Fairchild's product, Fairchild accepts no liability in the event of product failure. In other respects, this product shall be subject to Fairchild's Worldwide Terms and Conditions of Sale, unless a separate agreement has been signed by both Parties. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Terms of Use Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I77 (c) Fairchild Semiconductor Corporation www.fairchildsemi.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Fairchild Semiconductor: HCPL4503SVM 6N135SM 6N135M 6N135SDM