4-1
4
Call Toll Free: 1 (800) 323-9612
D-subminiature
Connectors
Information
Introduction
The D-subminiature is one of the most popular styles of connectors in the I/O categor y. It is used in computer,
telecom, datacom, medical, and test instrumentation applications as well as in the militar y and aerospace fields.
Types of D-subminiature connectors manufactured by Cinch
• Printed Circuit Board connectors:
- Vertical connectors for panel mounting with Dip Solder PC tails.
- Right-Angle connectors for board mounting with Dip Solder PC tails.
• Wire Termination connectors for cable assemblies or wire harnesses:
- Cr imp and Poke connectors.
- Solder Cup connectors.
- Insulation Displacement connectors IDCSto ter minate discrete wire or flat cable.
- Wire Wrap connectors .
How to read this section
• The infor mation pages provide standard data common to all D-subminiature connectors. These include:
- D-subminiature contact arrangements - see page 4-5.
- Panel mounting specifications/hardware - see page 4-6.
- D-subminiature shell dimensions - see page 4-7.
- D-subminiature and combo D layouts - see pages 4-5, 4-8 thr u 4-10, and 4-56.
- General Performance Specifications - see page 4-2.
- PCB thickness chart - see page 4-8.
• D-subminiature pages are grouped by ser ies. A series is a family of connectors with a similar performance level.
Each series shares a set of features and specifications, from economical and commercial grade product to
high-reliability and militar y connectors. Each series begins with a page outlining general features and
specifications of connectors, followed by the pages on individual connectors with drawings or features specific
to that connector. Drawings reflect clar ifications of dimensions not called out in the infor mation pages of this
catalog. The features of each series can be found in the chart on page 4-4.
• Accessories including backshells, junction shells, and hoods as well as hardware can be found on pages 4-80
thru 4-99.
• Termination tooling for Cinch connectors can be found at the end of the D-subminiature section of this
catalog on pages 4-100 thru 4-104.
4-2
Call Toll Free: 1 (800) 323-9612
4
D-subminiature
Connectors
Information
Introduction
General Information
•All connectors are inter mateable with any Cinch D-subminiature of comparable pin count and density, or the
D-sub connector of any other manufacturer complying dimensionally with MIL-C-24308.
•Solder ter minations and boardlocks meet the requirements for solderability in accordance with MIL-STD-202,
Method 208.
• DURABILITY
- Mated connectors are subjected to cycles of insertions and withdrawals specified on the catalog
page. After the prescribed cycles the connectors will meet the Cinch requirements concerning insertion-
withdrawal force, individual contact inser tion-withdrawal force, and contact resistance.
• APPROVALS
- Most Cinch connectors have UL recognition and CSA approval; however, the specific approvals are listed
on the individual catalog pages.
• CONTACTS
- Cinch connector contacts are generally offered in Gold Flash or 30µin. gold plating for commercial product,
and 50µin. gold plating for M24308 Series Military D-subminiature connectors.
- Cinch connectors utilize economical stamped and for med contacts and/or screw machine contacts for
enhanced perfor mance.
- Standard density connectors utilize size 20 contacts.
- Cinch 1.5 Density Ser ies connectors utilize size 22 contacts for greater density in a standard size
D-subminiature outer shell.
• METAL SHELLS
- Commercial-grade steel shells are usually available in zinc plating with yellow chromate finish or tin plating.
- Tin-plated plugs have grounding indents.
- Militar y grade M24308 Series connector shells are generally steel or in cer tain cases non-magnetic brass with
cadmium plating and yellow chromate finish.
- Insulator mater ials are glass-filled polyester, glass-filled nylon, and diallyl phthalate.
• The connectors are usually available in plugs and sockets in 9, 15, 25, 37, and 50 position sizes.
4-3 Call Toll Free: 1 (800) 323-9612
4
D-subminiature
Connectors
Information
Introduction
Printed Circuit Board Connectors
•Cinch provides connectors in various footprints, contact diameters, and lengths in both ver tical and r ight-angle
PC mount styles with dip solder tails.
• Cinch PCB connectors have metal shells.
Connectors for Terminating Cable Wire
• Wire Wrap connectors are available in two tail lengths for two-wrap and three-wrap ter minations. The contact
is terminated by wrapping wire around it using a wire wrap gun. This connector is especially useful for
prototyping since the wire can be unwrapped and rewrapped if necessar y.
• Solder Cup connectors allow reliable long-ter m ter mination by soldering the wire directly into the connector
contact. Cinch Solder Cups accommodate up to 20 AWG wire.
• Crimp and Poke connectors allow the wire to be terminated more economically than wire wrap or solder cup
styles. Contacts are crimped and inser ted into the connector. In our D*U Series, the contact is crimped around
the conductor wire. In our D*A Series, the contact is crimped around the wire and the insulation. Crimp and Poke
connectors can be selectively loaded to save labor and material cost.
• IDC connectors are an alternative to other types of wire ter mination connectors. IDC is much faster and ver y
reliable when all contacts are terminated and the volume is high. IDC utilizes mass ter mination of the cable wire.
This can save considerable time and expense in the cable assembly process. The estimated time of ter minating
two ends of a 25-conductor discrete wire cable with 25-position D-subminiature connectors is about 5-1/2 to 6
minutes less per cable assembly using IDC connectors and Cinch Auto-Clinch ter mination tooling versus using
Crimp and Poke connectors. This may vary considerably based on the operator, cable wire, and process.
Cinch offers IDC connectors in two versions-for discrete wire or flat ribbon ter mination.
Feature Guide
The char t below contains Cinch D-subminiature product features and styles grouped by series.
Performance Level Economical Commercial High-Reliability Military
Series D*KL HPD/HTD D*A D*U T Basic D Series 1 Series 3 M24308
T ermination T ype
Ver tical PCB 4-12 4-26 4-42 4-50 •
Right-Angle PCB 4-12 4-16 4-26 •4-76
Crimp and Poke 4-16 4-20 4-26 •4-72 4-76
Solder Cup 4-34 •4-50 4-76
IDC •
Wire Wrap •
Insulator Material
G-F Nylon ••
G-F Polyester •• ••
Diallyl Phthalate •• •
Shell Material
All Plastic •
Steel Shell •••••• •• •
Shell Plating
Tin-Lead Plating •••••• ••
Zinc Plating-Y/C finish ••• • • •
Cadmium Plating-Y/C finish •* • •
Contact Plating
Gold-Flash Plating ••••••
30µin. Gold Plating •••••• ••
50µin. Gold Plating •* • •
Contact T ype
Stamped Contacts ••••••
Machined Contacts •••••
Accessories information star ts on page 4-80.
Tooling infor mation starts on page 4-100.
* Applies to Combination Layout Only.
4-4
4
Call Toll Free: 1 (800) 323-9612
D-subminiature
Connectors
Information
Introduction
4-76
4-50
4-42
4-42
4-34
4-5 Call Toll Free: 1 (800) 323-9612
4
D-subminiature
Connectors
Information
Introduction
Contact Arrangements
NOTE: Mating face of plug is shown; socket is mirror image.
Standard Density Plug Inserts
1.5 Density Plug Inserts
4-6
4
D-subminiature
Connectors
Information
Panel Mounting Specifications
Dimensions
Mounting Method
Shell Front/ A B C D E F H
Size Positions Rear Panel in mm in mm in mm in mm in mm in mm in mm
Front 0.98 24.89 0.49 12.45 0.87 22.10 0.44 11.18 0.51 12.95 0.26 6.60 0.08 2.03
E9
Rear 0.98 24.89 0.49 12.45 0.81 20.57 0.40 10.16 0.45 11.43 0.23 5.84 0.13 3.30
Front 1.31 33.27 0.66 16.76 1.10 27.94 0.60 15.24 0.51 12.95 0.26 6.60 0.08 2.03
A15 Rear 1.31 33.27 0.66 16.76 1.13 28.70 0.57 14.48 0.45 11.43 0.23 5.84 0.13 3.30
Front 1.85 46.99 0.93 23.62 1.74 44.20 0.87 22.10 0.51 12.95 0.26 6.60 0.08 2.03
B25 Rear 1.85 46.99 0.93 23.62 1.67 42.42 0.84 21.34 0.45 11.43 0.23 5.84 0.13 3.30
Front 2.50 63.50 1.25 31.75 2.39 60.71 1.20 30.48 0.51 12.95 0.26 6.60 0.08 2.03
C37 Rear 2.50 63.50 1.25 31.75 2.33 59.18 1.16 29.46 0.45 11.43 0.23 5.84 0.13 3.30
Front 2.41 61.21 1.20 30.48 2.30 58.42 1.15 29.21 0.62 15.75 0.31 6.60 0.08 2.03
D50 Rear 2.41 61.21 1.20 30.48 2.22 56.39 1.11 28.19 0.56 14.22 0.28 5.84 0.13 3.30
PANEL MOUNTING HARDWARE: Aids in alignment of plug and receptacle .
Float Bushing Reverse Float Bushing
Floating Dual Bushing
4-40 Clinch Nut
Rear panel mounting
Rear panel mounting
Front and rear panel mounting
Front panel mounting
Introduction
Shells and Mounts
Call Toll Free: 1 (800) 323-9612
Two Holes
.120 + .005 (3.05 + 0.13) Dia.
4
4-7
Mating Side Termination Side
A +.015" B +.010" B1 +.005" C +.005" D +.010" D1 +.010" E +.010"
Shell Connector (0.38mm) (0.25mm) (0.13 mm) (0.13mm) (0.25mm) (0.25mm) (0.25mm)
Size Positions Type in mm in mm in mm in mm in mm in mm in mm
E 9 Plug 1.213 30.81 -- -- .666 16.90 0.984 24.99 -- -- .329 8.40 .494 12.55
Socket 1.213 30.81 .640 16.26 -- -- 0.984 24.99 .308 7.82 -- -- .494 12.55
A 15 Plug 1.541 39.14 -- --- .994 25.30 1.312 33.32 -- --- .329 8.40 .494 12.55
Socket 1.541 39.14 .968 24.59 -- -- 1.312 33.32 .308 7.82 -- -- .494 12.55
B 25 Plug 2.088 53.04 -- -- 1.534 39.00 1.852 47.04 -- -- .329 8.40 .494 12.55
Socket 2.088 53.04 1.508 38.30 -- -- 1.852 47.04 .308 7.82 -- -- .494 12.55
C 37 Plug 2.729 69.32 -- --- 2.182 55.40 2.500 63.50 -- --- .329 8.40 .494 12.55
Socket 2.729 69.32 2.156 54.76 -- -- 2.500 63.50 .308 7.82 -- --- .494 12.55
D 50 Plug 2.635 66.93 -- -- 2.079 52.80 2.406 61.11 -- -- .436 11.07 .605 15.37
Socket 2.635 66.93 2.062 52.34 -- -- 2.406 61.11 .420 10.67 -- -- .605 15.37
G +.010" H +.010" J +.010" K +.005" L +.010" M +.010"
Shell Connector (0.25mm) (0.25mm) (0.25 mm) (0.25mm) (0.25mm) (0.25mm)
Size Positions Type in mm in mm in mm in mm in mm in mm
E 9 Plug .759 19.28 .422 10.72 .030 0.76 .236 5.99 .045 1.14 .422 10.72
Socket .759 19.28 .422 10.72 .030 0.76 .243 6.17 .045 1.14 .429 10.92
A 15 Plug 1.083 27.51 .422 10.72 .030 0.76 .236 5.99 .045 1.14 .422 10.72
Socket 1.083 27.51 .422 10.72 .030 0.76 .253 6.17 .045 1.14 .429 10.92
B 25 Plug 1.625 41.27 .422 10.72 .039 0.99 .231 5.87 .060 1.52 .426 10.82
Socket 1.625 41.27 .422 10.72 .030 0.76 .243 6.17 .045 1.14 .429 10.92
C 37 Plug 2.272 57.71 .422 10.72 .039 0.99 .231 5.87 .060 1.52 .426 10.82
Socket 2.272 57.71 .422 10.72 .030 0.76 .243 6.17 .045 1.14 .429 10.92
D 50 Plug 2.178 55.32 .534 13.56 .039 0.99 .231 5.87 .060 1.52 .426 10.82
Socket 2.178 55.32 .534 13.56 .030 0.76 .243 6.17 .045 1.14 .429 10.92
B and D are outside dimensions for socket. D and B are inside dimensions for plug.
D-subminiature
Connectors
Information
Introduction
Shells and Mounts
Call Toll Free: 1 (800) 323-9612
4
4-8
D-subminiature
Connectors
Information
Introduction
Printed Circuit Board
Layout Hole Dimensions
Standard Density D-subminiature
Mounting Dimensions Board Layouts
Footprints (Component side shown)
9 Position
Shell Size E
25 Position
Shell Size B
15 Position
Shell Size A
The footpr ints on this page are standard for all metal
shell D-subminiature connectors.
On all right-angle D-subminiature connectors, the
shor t row of contacts is positioned closest to the
edge of the board.
PC Board Lead Hole Size
Terminal Dia. Hole Dia.
in mm in mm
.040 1.02 .055 1.40
.030 0.76 .045 1.14
.024-.025 0.61-0.64 .039 0.99
Call Toll Free: 1 (800) 323-9612
15X
25X
4-9 Call Toll Free: 1 (800) 323-9612
4
D-subminiature
Connectors
Information
Introduction
Printed Circuit Board
Layout Hole Dimensions
50 Position
Shell Size D
37 Position
Shell Size C
Standard Density D-subminiature
Mounting Dimensions Board Layouts
Footprints (Component side shown)
The footpr ints on this page are standard for all metal
shell D-subminiature connectors.
On all right-angle D-subminiature connectors, the
shor t row of contacts is positioned closest to the
edge of the board.
PC Board Lead Hole Size
Terminal Dia. Hole Dia.
in mm in mm
.040 1.02 .055 1.40
.030 0.76 .045 1.14
.024-.025 0.61-0.64 .039 0.99
4-10
Call Toll Free: 1 (800) 323-9612
4
D-subminiature
Connectors
Information
Introduction
Printed Circuit Board
Layout Hole Dimensions
1.5 Density D-subminiature
Recommended PCB Layout for
Footprint (Component side shown)
15 Position
Shell Size E
62 Position
Shell Size C
26 Position
Shell Size A
44 Position
Shell Size B
The footpr ints on this page are standard for all metal
shell D-subminiature connectors.
On all right-angle D-subminiature connectors, the
shor t row of contacts is positioned closest to the
edge of the board.
PC Board Lead Hole Size
Terminal Dia. Hole Dia.
in mm in mm
.040 1.02 .055 1.40
.030 0.76 .045 1.14
.024-.025 0.61-0.64 .039 0.99
)
4-12
Call Toll Free: 1 (800) 323-9612
FEATURES
■
Offered in right-angle or vertical PCB mount versions.
■
Available with gold flash or 30µin. gold plating.
■
Metal Shell provides grounding and shielding capability.
■
Approvals:
• UL Recognized: File E130965.
• CSA Approved: File LR97981.
■
See pages 4-5 thru 4-10 for standard dimensions, contact arrangements, and panel
mounting specifications.
MATERIALS
Insulator Material: Glass-filled polyester (black),
UL 94V-O rated
Contact Material: Socket - Phosphor bronze (stamped)
Plug - Brass (stamped)
Contact Plating: Gold flash or 30µin. gold in mating area and
tin/lead on tails. All over nickel.
Metal Shell: Steel with tin plating (grounding indents on plug)
ENVIRONMENTAL
Operating T emperature: -55°C to +125°C
Shock: 50G peak per MIL-STD-202, Method 213, Condition G
Vibration: 12 cycles in three per pendicular directions @
10-2000Hz, per MIL-STD-202, Method 204,
Condition D
Moisture Resistance: 90-95% relative humidity @ 40°C for 96
hours per MIL-STD-202, Method 103
ELECTRICAL
Withstanding Voltage: Right Angle - minimum AC 1250V
RMS @ sea level, Vertical -
minimum AC
1000V RMS @ sea level
Current Rating: 5 Amps
Contact Resistance: 15 milliohms maximum
Insulation Resistance: 5000 megohms maximum (initial);
1000 megohms (minimum) after
environmental testing
MECHANICAL
Individual Contact Insertion and
Separation Force (minimum/maximum): 0.7 oz./12 oz.
Durability: 500 mating cycles
D-subminiature Metal Shell
Right-Angle and Vertical PCB
D*KL Series
4-13 Call Toll Free: 1 (800) 323-9612
Economical D-subminiature Metal Shell
Right-Angle PCB
D*KL Series
Right-Angle Connectors
•0.318" footpr int.
• Available in 9, 15, and 25 position plugs and sockets.
• Offered with 4-40 threaded inser ts for secure mounting to panels or with female screwlocks.
• Boardlocks to provide mechanical hold-down during wave soldering process.
•Materials:
- Boardlock: Brass with tin plating.
- Female Screwlock: Brass with nickel plating.
4-40 Threaded Inser ts Female Screwlocks
Size Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DEKL-9SAT-E DEKL-9SAT-E2 DEKL-9SAT-F DEKL-9SAT-F2
15 DAKL-15SAT-E DAKL-15SAT-E2 DAKL-15SAT-F DAKL-15SAT-F2
25 DBKL-25SAT-E DBKL-25SAT-E2 DBKL-25SAT-F DBKL-25SAT-F2
4-40 Threaded Inser ts Female Screwlocks
Size Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DEKL-9PATI-E DEKL-9PATI-E2 DEKL-9PATI-F DEKL-9PATI-F2
15 DAKL-15PATI-E DAKL-15PATI-E2 DAKL-15PATI-F DAKL-15PATI-F2
25 DBKL-25PATI-E DBKL-25PATI-E2 DBKL-25PATI-F DBKL-25PATI-F2
Right-Angle Sockets
Right-Angle Plugs
Ordering Information
4-14
4
Call Toll Free: 1 (800) 323-9612
D-subminiature Metal Shell
Vertical PCB
D*KL Series
Plugs Sockets
Size Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DEKL-9PUTI DEKL-9PUTI-2 DEKL-9SUT DEKL-9SUT-2
15 DAKL-15PUTI DAKL-15PUTI-2 DAKL-15SUT DAKL-15SUT-2
25 DBKL-25PUTI DBKL-25PUTI-2 DBKL-25SUT DBKL-25SUT-2
37 DCKL-37PUTI DCKL-37PUTI-2 DCKL-37SUT DCKL-37SUT-2
50 DDKL-50PUTI DDKL-50PUTI-2 DDKL-50SUT DDKL-50SUT-2
Vertical PCB Connectors
Ordering Information
Plug
•Vertical Connectors:
- Available in 9, 15, 25, 37, and 50 position plugs and sockets with straight dip solder tails.
- 0.024" contact diameter.
- Offered with standard mounting holes.
4-16
Call Toll Free: 1 (800) 323-9612
FEATURES
■
1.5 Density means the connector uses small size #22 contacts for a higher pin count in a
standard size shell. Also accepts standard D-subminiature accessories (hoods, backshells, etc.)
per the following char t:
1.5 D-sub Standard D-sub
Shell SizeNo. of Pins No. of Pins
E15 9
A2615
B4425
C6237
■
Offered in cable plugs and right-angle PCB mount sockets.
■
Metal Shell provides grounding and shielding capability.
■
Approvals:
Plugs: • UL Recognized - Files E170218 (UL1977) & E130965 (UL1863).
• CSA Approved - File LR31996-7.
Sockets: UL Recognized - File E170218.
■
See pages 4-5 thru 4-10 for standard dimensions, contact arrang ements, and panel
mounting specifications.
MATERIALS
Connector Shell: Steel with tin plating (grounding indents on plug)
Contact Material: Phosphor bronze (stamped)
Contact Plating:
• Sockets: Gold flash or 30µin. gold in mating area and tin/lead
on tails. All over nickel.
• Plugs: Gold flash or 30µin. gold in mating area and gold flash on
remainder. All over nickel.
ENVIRONMENTAL
Operating T emperature: -55°C to +125°C
Shock: 50G peak per MIL-STD-202, Method 213, Condition G
Vibration: 12 cycles in three per pendicular directions @10-2000Hz,
per MIL-STD-202, Method 204, Condition D
Moisture Resistance: 90-95% relative humidity @ 40°C for 96
hours per MlL-STD-202, Method 103
ELECTRICAL
Withstanding Voltage: Minimum 1000V RMS @ sea level
Current Rating: 3 Amps
Contact Resistance: 15 milliohms maximum
Insulation Resistance: 5000 megohms maximum (initial);
1000 megohms (minimum) after
environmental testing
MECHANICAL
Individual Contact Insertion and
Separation Force (minimum/maximum): 0.7 oz./12 oz.
Durability:
• Plugs - 200 mating cycles
• Sockets - 200 mating cycles
D-subminiature 1.5 Density Metal Shell
Crimp and Poke and Right-Angle PCB
HPD/HTD Series
4-17 Call Toll Free: 1 (800) 323-9612
D-subminiature 1.5 Density Metal Shell
Crimp and Poke Plugs
HTD Series
Connectors:
• Offered with .120 mounting holes.
• Shells offered with tin plating and grounding indents.
• These connectors are designed to accommodate one repair cycle.
Contacts: (Not included with connectors, order separately)
•Available with gold-flash plating or 30µin. gold.
• Crimp and Poke versions are offered in reels of 15,000 or 300 contacts.
• Solder and Poke contacts are packed loose.
• Will accommodate 22-30 AWG wire.
• Order contacts separately. See page 4-18.
T ermination T ooling:
•Semi-automatic Stripper Cr imper Tool for 15,000 reels: #HTD-518. See page 4-102.
• Crimp Contact Hand Tool for 300-piece reels: #HTD-266. See page 4-101.
• Semi-automatic Hand Crimping Tool for individual contact termination: #HTD-544. See page 4-101.
• Contact Inser tion/Extraction Tool: Cinch #CIET-22-DF. See page 4-101.
Materials:
• Insulator Material: Black UL 94 V-0 glass-filled nylon.
Ordering Information
HTD Series 1. 5 Density Crimp and Poke Plug Connectors
Size Shell Size Catalog Number
15 E HTDE-15PTI-FO
26 A HTDA-26PTI-FO
44 B HTDB-44PTI-FO
62 C HTDC-62PTI-FO
4-18
4
•Use with HTD Series 1.5 D-Sub Cr imp and Poke connectors and over mold kits.
• All Crimp and Poke contacts are on right-hand feed reels.
Crimp and Poke Plug Contact
Solder and Poke Plug
HTD Series 1. 5 D-sub Male Crimp and Poke and Solder and Poke Contacts
Type of Crimp and Poke Crimp and Poke Solder and Poke
Packing 15,000 Reel 300 Reel Loose
Plating Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
Pin HTD-CP-9-15000 HTD-CP-1-15000 HTD-CP-9-300 HTD-CP-1-300 HTD-SP-9-10 Not Available
Ordering Information
D-subminiature 1.5 Density Metal Shell
Crimp and Poke Plugs
HTD Series
Call Toll Free: 1 (800) 323-9612
4-19
4
D-subminiature 1.5 Density Metal Shell
Right-Angle PCB Sockets
HPD Series
• .350" footprint.
• Offered with fixed 4-40 threaded inser ts for secure mounting to panels or with assembled female screwlocks.
• Boardlocks to maintain electrical continuity between shell and PC board ground and provide mechanical
hold-down during wave soldering process.
• Available in standard configuration sockets, sizes 15, 26, 44, and 62 with black insulator.
• 15 position socket also available with royal blue insulator in Windows ‘95®configuration with Pin #9
recessed 0.050".
Materials:
•Insulator Material: Glass-filled polyester (standard configuration - black, -9R configuration - blue),
UL 94V-0 rated.
• Boardlock: Brass with tin plating. • Female Screwlock: Brass with Nickel plating.
Dimensions
ABCD
Positions +.015 (+0.038) +.010 (+0.25) +.010 (+0.25)
in mm in mm in mm in mm
15 1.214 30.84 0.984 24.99 0.640 16.26 0.090 2.29
26 1.545 39.24 1.312 33.32 0.967 24.56 0.090 2.29
44 2.088 53.04 1.852 47.04 1.508 38.30 0.090 2.29
62 2.730 69.34 2.500 63.50 2.156 54.76 0.095 2.41
Shell 4-40 Threaded Inserts Female Screwlocks
Size Size Type Color Gold Flash 30µin. Gold Gold Flash 30µin. Gold
15 E Standard Black HPDEB-15SAT-E HPDEB-15SAT-E2 HPDEB-15SAT-F HPDEB-15SAT-F2
26 A Standard Black HPDAB-26SAT-E HPDAB-26SAT-E2 HPDAB-26SAT-F HPDAB-26SAT-F2
44 B Standard Black HPDBB-44SAT-E HPDBB-44SAT-E2 HPDBB-44SAT-F HPDBB-44SAT-F2
62 C Standard Black HPDCB-62SAT-E HPDCB-62SAT-E2 HPDCB-62SAT-F HPDCB-62SAT-F2
15 E Windows ‘95®Blue HPDEB-15SAT-E-9R HPDEB-15SAT-E2-9R HPDEB-15SAT-F-9R HPDEB-15SATF2-9R
Windows '95 is a registered trademark of Microsoft.
Ordering Information
HPD Series 1.5 Density Right-Angle Socket Connectors
WITH #4-40 FEMALE SCREWLOCKS
(ASSEMBLED)
Call Toll Free: 1 (800) 323-9612
4-20
Call Toll Free: 1 (800) 323-9612
FEATURES
■
Offered in 9, 15 , 25, 37, and 50 position plugs and sockets.
■
Contacts:
- Available with gold flash or 30µin. gold plating.
- Offered in 15,000 contact reel or 300 contact reel, or in loose-piece bags of 100 or 1000 each.
- Accommodate 20-24 AWG wire or 26-30 AWG wire .
- Not included with connector - order stamped contacts separately.
■
Approvals:
- UL Recognized - Files E170218 (UL1977) and E130965 (UL1863).
- CSA Approved - File LR31996.
■
See pages 4-5 thru 4-10 for standard dimensions, contact arrang ements, and panel
mounting specifications.
MATERIALS
Insulator Material: Glass-filled nylon (black), UL 94 V-O rated
Connector Shell: Steel with zinc plating and yellow chromate finish or tin
plating (plug has grounding indents)
Contact Material:
• Plug - Brass (stamped)
• Socket - Phosphor bronze (stamped)
Contact Plating: Gold flash or 30µin. gold in mating area and gold flash
on the remainder. All over nickel.
4-40 Clinch Nut: Steel with cadmium plating and yellow chromate finish
Dual Float Bushing: Stainless steel, passivated
ENVIRONMENTAL
Operating T emperature: -65°C to + 125°C
Shock: 50G peak per MIL-STD-202, Method 213, Condition G
Vibration: 12 cycles in three per pendicular directions @ 10-2000Hz, per
MIL-STD-202, Method 204, Condition D
Moisture Resistance: 90-95% relative humidity @ 40°C for 96 hours per
MIL-STD-202, Method 103
ELECTRICAL
Withstanding Voltage: Minimum 1000V RMS @ sea level
Current Rating: 5 Amps
Contact Resistance: 2.7 milliohms maximum
Insulation Resistance: 5000 megohms maximum (initial);
1000 megohms (minimum) after
environmental testing
MECHANICAL
Individual Contact Insertion and
Separation Force (minimum/maximum): 0.7 oz./12 oz.
Durability: 500 mating cycles
D-subminiature Metal Shell
Crimp and Poke
D*A Series
4-21 Call Toll Free: 1 (800) 323-9612
D-subminiature Metal Shell
Crimp and Poke Connectors
D*A Series
•Offered with .120 mounting holes or 4-40 clinch nuts.
T ermination T ools
• Semi-Automatic Str ipper Cr imper Tool for 15K reels: #GSC-20-30. See page 4-102.
• Contact Inser tion/Extraction Tool: #CIET-20-HDB. See page 4-101.
• Crimp Contact Hand Tool for 300-piece reels: #GHC-B (20-26 AWG wire) or Catalog #GHC-B1
(28-30 AWG wire). See page 4-101.
• Crimp Contact Hand Tool for loose piece contacts: #HTD-544. See page 4-101.
.453 (11.51) MAX.
Ordering Information
D*A Series Crimp and Poke Connectors - Plugs
Zinc-plated shell with yellow chromate finish Tin-plated shell with grounding indents
Positions Mounting Holes 4-40 Clinch Nuts Mounting Holes 4-40 Clinch Nuts
9 DEA-9P-FO DEAE-9P-FO DEA-9PTI-FO DEAE-9PTI-FO
15 DAA-15P-FO DAAE-15P-FO DAA-15PTI-FO DAAE-15PTI-FO
25 DBA-25P-FO DBAE-25P-FO DBA-25PTI-FO DBAE-25PTI-FO
37 DCA-37P-FO DCAE-37P-FO DCA-37PTI-FO DCAE-37PTI-FO
50 DDA-50P-FO DDAE-50P-FO DDA-50PTI-FO DDAE-50PTI-FO
D*A Series Crimp and Poke Connectors - Sockets
Zinc-plated shell with yellow chromate finish Tin-plated shell
Positions Mounting Holes 4-40 Clinch Nuts Mounting Holes 4-40 Clinch Nuts
9 DEA-9S-FO DEAE-9S-FO DEA-9ST-FO DEAE-9ST-FO
15 DAA-15S-FO DAAE-15S-FO DAA-15ST-FO DAAE-15ST-FO
25 DBA-25S-FO DBAE-25S-FO DBA-25ST-FO DBAE-25ST-FO
37 DCA-37S-FO DCAE-37S-FO DCA-37ST-FO DCAE-37ST-FO
50 DDA-50S-FO DDAE-50S-FO DDA-50ST-FO DDAE-50ST-FO
4-22
4
Call Toll Free: 1 (800) 323-9612
D*A Series Crimp and Poke Contacts on Reels
Contacts per Reel 15,000 15,000 300 300
Wire Gauge 20-24 AWG 26-30 AWG 20-24 AWG 26-30 AWG
Plating Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
Pin DGP-15-1 DGP-15-2 DGP-15-3 DGP-15-4 DGP-3-1 DGP-3-2 DGP-3-3 DGP-3-4
Socket DGS-15-1 DGS-15-2 DGS-15-3 DGS-15-4 DGS-3-1 DGS-3-2 DGS-3-3 DGS-3-4
D-subminiature Metal Shell
Crimp and Poke Insulation Grip Contacts
D*A Series
D*A Series Crimp and Poke Loose-Piece Contacts
Contacts per Bag 100 100 1000 1000
Wire Gauge 20-24 AWG 26-30 AWG 20-24 AWG 26-30 AWG
Plating Gold Flash 30µin Gold Gold Flash 30µin Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
Pin DGP-100L-1 DGP-100L-2 DGP-100L-3 DGP-100L-4 DGP-1000L-1 DGP-1000L-2 DGP-1000L-3 DGP-100L-4
Socket DGS-100L-1 DGS-100L-2 DGS-100L-3 DGS-100L-4 DGS-1000L-1 DGS-1000L-2 DGS-1000L-3 DGS-100L-4
Contacts
Ordering Information
Socket
Pin
4-24
Call Toll Free: 1 (800) 323-9612
D-subminiature Metal Shell
Overmold Kits
D*A and HTD Series
FEATURES
■
Cinch overmold kits enable you to overmold the connector of the cable assembly for less
material and process cost (versus a metal backshell), improved appearance, and improved
shielding of the connector to help meet RFI/EMI requirements.
■
An Overmold Kit catalog number consists of:
- D*A or HTD Crimp and Poke connector.
- Inside shielding cover.
- Outside shielding cover.
■
You will also need to order the following:
- Crimp and Poke stamped contacts must be ordered separately on page 4-22 for D*A
and page 4-18 for HTD connectors.
- Ferrules are required, but must be ordered separately according to the size necessar y to
accommodate the wire. See page 4-25.
- Termination tooling is required to crimp the wires on the connector.
- A hand tool and appropriate crimping die are required for crimping the ferrule.
■
All specifications on the connector portion of the overmold kit can be found on pag es 4-16 thru
4-17 for HPD 1.5 density and pag es 4-20 thru 4-21 for D*A series.
MATERIALS
Shield Covers: Steel (stamped) with tin/lead finish
Ferrule: Brass
Overmold Shielding Kits
CDE FGH
Positions in mm in mm in mm in mm Deg. in mm
9 Plug 0.270 6.86 0.705 17.91 1.320 33.53 0.520 13.21 75° 0.440 11.18
9 Socket 0.285 7.24 0.705 17.91 1.320 33.53 0.520 13.21 75° 0.440 11.18
15 Plug 0.270 6.86 1.050 26.67 1.320 33.53 0.520 13.21 58° 0.440 11.18
15 Socket 0.285 7.24 1.050 26.67 1.320 33.53 0.520 13.21 58° 0.440 11.18
25 Plug 0.275 6.99 1.590 40.39 1.320 33.53 0.520 13.21 40° 0.440 11.18
25 Socket 0.285 7.24 1.590 40.39 1.320 33.53 0.520 13.21 40° 0.440 11.18
37 Plug 0.275 6.99 2.240 56.90 1.620 41.15 0.750 19.05 32° 0.520 13.21
37 Socket 0.285 7.24 2.240 56.90 1.620 41.15 0.750 19.05 32° 0.520 13.21
Dimensions
4-25 Call Toll Free: 1 (800) 323-9612
D-subminiature Metal Shell
Overmold Kits and Ferrules
D*A and HTD Series
• Pneumatic Bench Top Press for Cr imping Ferrules #FCT-551. See page 4-103.
• Hand Tool for Cr imping Ferrules #FCT-552. See page 4-103.
Ordering Information
Catalog J K L Crimp Die
Number Type in mm in mm in mm Catalog No.
CF-51 1 .437 11.10 .200 5.08 .450 11.43 CD-07
CF-42 1 .437 11.10 .235 5.97 .450 11.43 CD-00
CF-43 1 .437 11.10 .250 6.35 .450 11.43 CD-01
CF-44 1 .437 11.10 .325 8.26 .450 11.43 CD-02
CF-45 1 .437 11.10 .350 8.89 .450 11.43 CD-03
CF-46 1 .437 11.10 375 9.53 .450 11.43 CD-04
CF-47 2 .437 11.10 .437 11.10 .450 11.43 CD-05
CF-50 2 .460 11.68 .460 11.68 .450 11.43 CD-06
Crimp Ferrule
HTD Series 1. 5 Density Plugs Overmold Kits
Overmold Kits (Cont’d)
Ordering Information
D*A Series Crimp and Poke Overmold Kits
Tin-plated shell
Positions Plugs Sockets
9 DEAO-9PTI-FO1 DEAO-9ST-FO1
15 DAAO-15PTI-FO1 DAAO-15ST-FO1
25 DBAO-25PTI-FO1 DBAO-25ST-FO1
37 DCAO-37PTI-FO1 DCAO-37ST-FO1
Size Shell Size Catalog Number
15 E HTDEO-15PTI-FO1
26 A HTDAO-26PTI-FO1
44 B HTDBO-44PTI-FO1
4-26
Call Toll Free: 1 (800) 323-9612
FEATURES
■
Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors-
9 , 15, and 25 positions).
■
Available with gold flash or 30µin. gold plating.
■
Offered with .120 mounting holes, optional 4-40 clinch nuts, or dual float bushings (except right-
angle PCB connectors-mounting holes only).
■
Approvals:
• UL Recognized - Files E170218 (UL1977) and E130965 (UL1863).
• CSA Approved - File LR31996.
■
See pages 4-5 thru 4-10 for standard dimensions, contact arrang ements, and panel
mounting specifications.
MATERIALS
Insulator Material: Glass-filled nylon (black), UL 94 V-O rated
Connector Shell: Steel with zinc plating and yellow chromate
finish or tin plating (grounding indents
on plug)
4-40 Clinch Nut: Steel with cadmium plating and yellow
chromate finish
Dual Float Bushing: Stainless steel, passivated
ENVIRONMENTAL
Operating T emperature: -65°C to + 125°C
Shock: 50G peak per MIL-STD-202, Method 213, Condition G
Vibration: 12 cycles in three per pendicular directions @
10-2000Hz, per MIL-STD-202, Method 204,
Condition D
Moisture Resistance: 90-95% relative humidity @ 40°C for
96 hours per MIL-STD-202, Method 103
ELECTRICAL
Withstanding Voltage: Minimum 1000V RMS @ sea level
Current Rating: 5 Amps
Contact Resistance: 2.7 milliohms maximum
Insulation Resistance: 5000 megohms maximum
(initial); 1000 megohms (minimum)
after environmental testing
MECHANICAL
Individual Contact Insertion and
Separation Force (minimum/maximum): 0.7 oz./12 oz.
Durability: 500 mating cycles
D-subminiature Metal Shell
Crimp and Poke, Right-Angle and Vertical PCB
D*U Series
4-27
4
Call Toll Free: 1 (800) 323-9612
D-subminiature Metal Shell
Crimp and Poke
D*U Series
• Machined contacts supplied loose with connector or can be ordered separately. Use with 20-24 AWG wire.
• Stamped Contacts (order separately) for use when order ing connector with contacts not included (-FO option). Use with
20-28 AWG wire.
- Available in 10K reel.
- Order reels of stamped contacts separately.
Materials
•Contact Material: Plug - Brass (stamped) or copper alloy (machined). Socket - Phosphor bronze (stamped) or copper
alloy (machined).
• Contact Plating:
- Stamped Plugs and Sockets: Gold flash or 30µin. gold and gold flash on the remainder. All over nickel.
- Machined Plugs and Sockets: Gold flash or 30µin. gold. All over nickel.
T ermination T ooling
•Semi-Automatic Str ipper Cr imper for Stamped Contacts on 10K PC reels: #ESC-20-3. See page 4-102.
• Contact Inser tion/Extraction: #CIET-20-HDB. See page 4-101.
• Loose Contact Crimp Tool:
Machined Contact - #M22520/2-01. See page 4-103.
For Positioner as required see page 4-103.
Stamped Contacts #BT-20-HC see page 4-101.
No positioner required.
4-28
4
Call Toll Free: 1 (800) 323-9612
D-subminiature Metal Shell
Crimp and Poke
D*U Series
Zinc-Plated Shell with Yellow Chromate Finish
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Contacts Without Contacts Without Contacts Without
Position Included Contacts Included Contacts Included Contacts
9 DEU-9S DEU-9S-FO DEUE-9S DEUE-9S-FO DEUY-9S DEUY-9S-FO
15 DAU-15S DAU-15S-FO DAUE-15S DAUE-15S-FO DAUY-15S DAUY-15S-FO
25 DBU-25S DBU-25S-FO DBUE-25S DBUE-25S-FO DBUY-25S DBUY-25S-FO
37 DCU-37S DCU-37S-FO DCUE-37S DCUE-37S-FO DCUY-37S DCUY-37S-FO
50 DDU-50S DDU-50S-FO DDUE-50S DDUE-50S-FO DDUY-50S DDUY-50S-FO
D*U Crimp and Poke Sockets
Tin-Plated Shell
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Contacts Without Contacts Without Contacts Without
Position Included Contacts Included Contacts Included Contacts
9 DEU-9ST DEU-9ST-FO DEUE-9ST DEUE-9ST-FO DEUY-9ST DEUY-9ST-FO
15 DAU-15ST DAU-15ST-FO DAUE-15ST DAUE-15ST-FO DAUY-15ST DAUY-15ST-FO
25 DBU-25ST DBU-25ST-FO DBUE-25ST DBUE-25ST-FO DBUY-25ST DBUY-25ST-FO
37 DCU-37ST DCU-37ST-FO DCUE-37ST DCUE-37ST-FO DCUY-37ST DCUY-37ST-FO
50 DDU-50ST DDU-50ST-FO DDUE-50ST DDUE-50ST-FO DDUY-50ST DDUY-50ST-FO
Zinc-Plated Shell with Yellow Chromate Finish
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Contacts Without Contacts Without Contacts Without
Position Included Contacts Included Contacts Included Contacts
9 DEU-9P DEU-9P-FO DEUE-9-P DEUE-9P-FO DEUY-9P DEUY-9P-FO
15 DAU-15P DAU-15P-FO DAUE-15-P DAUE-15-P-FO DAUY-15P DAUY-15P-FO
25 DBU-25P DBU-25P-FO DBUE-25-P DBUE-25P-FO DBUY-25P DBUY-25P-FO
37 DCU-37P DCU-37P-FO DCUE-37-P DCUE-37P-FO DCUY-37P DCUY-37P-FO
50 DDU-50P DDU-50P-FO DDUE-50-P DDUE-50P-FO DDUY-50P DDUY-50P-FO
Tin-Plated Shell with Grounding Indents
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Contacts Without Contacts Without Contacts Without
Position Included Contacts Included Contacts Included Contacts
9 DEU-9PTI DEU-9PTI-FO DEUE-9PTI DEUE-9PTI-FO DEUY-9PTI DEUY-9PTI-FO
15 DAU-15PTI DAU-15PTI-FO DAUE-15PTI DAUE-15PTI-FO DAUY-15PTI DAUY-15PTI-FO
25 DBU-25PTI DBU-25PTI-FO DBUE-25PTI DBUE-25PTI-FO DBUY-25PTI DBUY-25PTI-FO
37 DCU-37PTI DCU-37PTI-FO DCUE-37PTI DCUE-37PTI-FO DCUY-37PTI DCUY-37PTI-FO
50 DDU-50PTI DDU-50PTI-FO DDUE-50PTI DDUE-50PTI-FO DDUY-50PTI DDUY-50PTI-FO
D*U Crimp and Poke Plugs
Ordering Information
4-29
4
Call Toll Free: 1 (800) 323-9612
D-subminiature Metal Shell
Crimp and Poke Contacts
D*U Series
Gold Flash 30µin. Gold
Pin 030-1952-000 030-1952-030
Socket 030-1953-000 030-1953-030
Ordering Information
D*U Series Stamped Contacts on 10K Reels
Dimensions
A B C Max.
Wire
Description AWG in mm in mm in mm
Pin #20, 22, 24 .066 1.67 .045 1.14 .537 13.64
Socket #20, 22, 24 .066 1.67 .045 1.14 .523 13.28
Plug Socket
Ordering Information
D*U Series Loose-Piece Machined Contacts
Plug Socket
Machined Contacts • 20-24 AWG Wire
Stamped Contacts • 20-28 AWG Wire
Gold Flash 30µin. Gold
Pin BCL-1964-20P D110238-034
Socket BCL-1963-20S D110238-035
4-30
4
Call Toll Free: 1 (800) 323-9612
•.445" footpr int.
• .024" contact diameter.
Materials
• Contact Material: Socket - Copper alloy (machined), Plug - Brass (machined).
• Contact Plating: Gold flash or 30µin. gold. All over nickel.
• Mounting bracket: Black nylon. Can be removed if necessary.
D*U Right-Angle Sockets
Zinc-Plated Shell with Yellow Chromate Finish Tin-Plated Shell
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DEU-9SAD DEU-9SAD-30 DEU-9SADT DEU-9SADT-30
15 DAU-15SAD DAU-15SAD-30 DAU-15SADT DAU-15SADT-30
25 DBU-25SAD DBU-25SAD-30 DBU-25SADT DBU-25SADT-30
D*U Right-Angle Plugs
Zinc-Plated Shell with Yellow Chromate Finish Tin-Plated Shell with Grounding Indents
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DEU-9PAD DEU-9PAD-30 DEU-9PADTI DEU-9PADTI-30
15 DAU-15PAD DAU-15PAD-30 DAU-15PADTI DAU-15PADTI-30
25 DBU-25PAD DBU-25PAD-30 DBU-25PADTI DBU-25PADTI-30
.375
(9.50)
.010
(0.25)
Ref.
.040 (1.02)
.030 (0.76)
.026 (0.66)
.022 (0.56)
.117 (2.97)
.107 (2.72) Typ.
.657 (16.69)
.637 (16.18)
.164 (4.17)
.149 (3.78)
.453
(11.51)
.437 11.10)
Ordering Information
D-subminiature Metal Shell
Right-Angle Dip Solder PCB
D*U Series
4-31
4
Call Toll Free: 1 (800) 323-9612
• .024" contact diameter.
• Longer rear insulator provides integral standoff from PCB.
Materials
• Contact Material: Plug - Brass (machined), Socket - Copper alloy (machined).
• Contact Plating: Gold flash or 30µin. gold. All over nickel.
D-subminiature Metal Shell
Vertical Dip Solder PCB
D*U Series
.159 (4.04)
.129 (3.28)
.026 (066)
.022 (0.56) Typ.
.375
(9.50)
Max.
.514 (13.06)
.483 (12.27)
Vertical Plugs
Zinc-Plated Shell with Yellow Chromate Finish
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DEU-9PBF DEU-9PBF-30 DEUE-9PBF DEUE-9PBF-30 DEUY-9PBF DEUY-9PBF-30
15 DAU-15PBF DAU-15PBF-30 DAUE-15PBF DAUE-15PBF-30 DAUY-15PBF DAUY-15PBF-30
25 DBU-25PBF DBU-25PBF-30 DBUE-25PBF DBUE-25PBF-30 DBUY-25PBF DBUY-25PBF-30
37 DCU-37PBF DCU-37PBF-30 DCUE-37PBF DCUE-37PBF-30 DCUY-37PBF DCUY-37PBF-30
50 DDU-50PBF DDU-50PBF-30 DDUE-50PBF DDUE-50PBF-30 DDUY-50PBF DDUY-50PBF-30
Tin-Plated Shell with Grounding Indents
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DEU-9PBFTI DEU-9PBFTI-30 DEUE-9PBFTI DEUE-9PBFTI-30 DEUY-9PBFTI DEUY-9PBFTI-30
15 DAU-15PBFTI DAU-15PBFTI-30 DAUE-15PBFTI DAUE-15PBFTI-30 DAUY-15PBFTI DAUY-15PBFTI-30
25 DBU-25PBFTI DBU-25PBFTI-30 DBUE-25PBFTI DBUE-25PBFTI-30 DBUY-25PBFTI DBUY-25PBFTI-30
37 DCU-37PBFTI DCU-37PBFTI-30 DCUE-37PBFTI DCUE-37PBFTI-30 DCUY-37PBFTI DCUY-37PBFTI-30
50 DDU-50PBFTI DDU-50PBFTI-30 DDUE-50PBFTI DDUE-50PBFTI-30 DDUY-50PBFTI DDUY-50PBFTI-30
Ordering Information
4-32
4
Call Toll Free: 1 (800) 323-9612
D-subminiature Metal Shell
Vertical Dip Solder PCB
D*U Series
Vertical Sockets
Zinc-Plated Shell with Yellow Chromate Finish
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DEU-9SBF DEU-9SBF-30 DEUE-9SBF DEUE-9SBF-30 DEUY-9SBF DEUY-9SBF-30
15 DAU-15SBF DAU-15SBF-30 DAUE-15SBF DAUE-15SBF-30 DAUY-15SBF DAUY-15SBF-30
25 DBU-25SBF DBU-25SBF-30 DBUE-25SBF DBUE-25SBF-30 DBUY-25SBF DBUY-25SBF-30
37 DCU-37SBF DCU-37SBF-30 DCUE-37SBF DCUE-37SBF-30 DCUY-37SBF DCUY-37SBF-30
50 DDU-50SBF DDU-50SBF-30 DDUE-50SBF DDUE-50SBF-30 DDUY-50SBF DDUY-50SBF-30
Tin-Plated Shell Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DEU-9SBFT DEU-9SBFT-30 DEUE-9SBFT DEUE-9SBFT-30 DEUY-9SBFT DEUY-9SBFT-30
15 DAU-15SBFT DAU-15SBFT-30 DAUE-15SBFT DAUE-15SBFT-30 DAUY-15SBFT DAUY-15SBFT-30
25 DBU-25SBFT DBU-25SBFT-30 DBUE-25SBFT DBUE-25SBFT-30 DBUY-25SBFT DBUY-25SBFT-30
37 DCU-37SBFT DCU-37SBFT-30 DCUE-37SBFT DCUE-37SBFT-30 DCUY-37SBFT DCUY-37SBFT-30
50 DDU-50SBFT DDU-50SBFT-30 DDUE-50SBFT DDUE-50SBFT-30 DDUY-50SBFT DDUY-50SBFT-30
Ordering Information (Cont’d)
4-34
Call Toll Free: 1 (800) 323-9612
FEATURES
■
Offered in 9, 15, 25, and 37 position plugs and sockets.
■
Available in Solder Cup and IDC (insulation displacement) terminations for discrete wire .
■
Offered with .120 mounting holes.
■
Approvals:
• UL Recogniz ed - Files E170218 (UL1977) and E130965 (UL1863).
• CSA Approved - File LR31996.
■
See pages 4-5 thru 4-10 for standard dimensions, contact arrang ements, and panel
mounting specifications.
MATERIALS
Insulator Material: Glass-filled polyester (black), UL 94 V-O rated
Connector Shell: Steel with zinc plating and yellow chromate finish or
tin plating (grounding indents on plug)
Contact Material: Phosphor bronze (stamped)
Contact Plating: Gold flash or 30µin. gold in mating area and gold
flash on the remainder. All over nickel.
ENVIRONMENTAL
Operating T emperature: -65°C to + 125°C
Shock: 50G peak per MIL-STD-202, Method 213, Condition G
Vibration: 12 cycles in three per pendicular directions @ 10-2000Hz, per
MIL-STD-202, Method 204, Condition D
Moisture Resistance: 90-95% relative humidity @ 40°C for 96 hours per
MIL-STD-202, Method 103
ELECTRICAL
Withstanding Voltage: Minimum 1000V RMS @ sea level
Current Rating: 3 Amps
Contact Resistance: 2.7 milliohms maximum
Insulation Resistance: 5000 megohms maximum (initial);
1000 megohms (minimum) after
environmental testing
MECHANICAL
Individual Contact Insertion and
Separation Force (minimum/maximum): 0.7 oz./12 oz.
Durability: 500 mating cycles
D-subminiature Metal Shell and All Plastic
Solder Cup and IDC
T* Series
4-35 Call Toll Free: 1 (800) 323-9612
• Solder channels between barriers per mit single-pass soldering of each row without solder bridging.
• Will accommodate up to 22 AWG wire.
D-subminiature Metal Shell
Solder Cup for Discrete Cable Wire
T* Series
Ordering Information
Solder Cup Plugs
Zinc-Plated Shell Tin-Plated Shell
with Yellow Chromate Finish with Grounding Indents
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 TE-9PS TE-9PS-30 TE-9PTIS TE-9PTIS-30
15 TA-15PS TA-15PS-30 TA-15PTIS TA-15PTIS-30
25 TB-25PS TB-25PS-30 TB-25PTIS TB-25PTIS-30
37 TC-37PS TC-37PS-30 TC-37PTIS TC-37PTIS-30
Solder Cup Sockets
Zinc-Plated Shell Tin-Plated Shell
with Yellow Chromate Finish
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 TE-9SS TE-9SS-30 TE-9STS TE-9STS-30
15 TA-15SS TA-15SS-30 TA-15STS TA-15STS-30
25 TB-25SS TB-25SS-30 TB-25STS TB-25STS-30
37 TC-37SS TC-37SS-30 TC-37STS TC-37STS-30
4-36
4
Call Toll Free: 1 (800) 323-9612
Ordering Information
IDC Plugs
Zinc-Plated Shell Tin-Plated Shell
with Yellow Chromate Finish with Grounding Indents
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 TE-9PSH TE-9PSH-30 TES-9PTI TES-9PTI-30
15 TA-15PSH TA-15PSH-30 TAS-15PTI TAS-15PTI-30
25 TB-25PSH TB-25PSH-30 TBS-25PTI TBS-25PTI-30
37 TC-37PSH TC-37PSH-30 TCS-37PTI TCS-37PTI-30
IDC Sockets
Zinc-Plated Shell Tin-Plated Shell
with Yellow Chromate Finish
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 TE-9SSH TE-9SSH-30 TES-9ST TES-9ST-30
15 TA-15SSH TA-15SSH-30 TAS-15ST TAS-15ST-30
25 TB-25SSH TB-25SSH-30 TBS-25ST TBS-25ST-30
37 TC-37SSH TC-37SSH-30 TCS-37ST TCS-37ST-30
• Will accommodate 24-26 AWG solid or stranded PVC wire.
D-subminiature Metal Shell
IDC for Discrete Cable Wire
T* Series
4-37
4
Call Toll Free: 1 (800) 323-9612
D-subminiature Metal Shell
IDC for Discrete Cable Wire
T* Series
• Optional strain relief covers for connectors when backshell is not required.
Positions Catalog No.
9 SSD-WC9
15 SSD-WC15
25 SSD-WC25
37 SSD-WC37
•Auto-Clinch D Semi-Automatic Ter mination Tool #ACD-432: See page 4-100.
• Cer ti-Clinch D Manual Ter mination Tool #SD-CCWN: For 24-26 AWG wire: See page 4-100.
• Uni-Clinch D Single-Wire Hand Inser tion Tool #SD-UC: See page 4-100.
• Super D Manual Stay Band Tool #SD-MSBT: See page 4-100.
Ordering Information
• One-piece cover for 9 contact size. Order one per connector. Two-piece cover for other sizes. Order two per connector.
• Cover fits both plug and socket.
4-38
4
Call Toll Free: 1 (800) 323-9612
• Auto-Clinch D Semi-Automatic Ter mination Tool #ACD-432: See page 4-100.
• Cer ti-Clinch D Manual Ter mination Tool #SD-CC for 24-28 AWG wire: See page 4-100.
• Uni-Clinch D Single-Wire Hand Inser tion Tool #SD-UC: See page 4-100.
• Super D Manual Stay Band Tool #SD-MSBT: See page 4-100.
D-subminiature All-Plastic
IDC for Discrete Cable Wire
T* Series
Dimensions
AAB CPCSD
Positions in mm in mm in mm in mm in mm in mm
9 1.209 30.71 1.309 33.25 .984 24.99 .668 16.96 .642 16.31 .592 15.04
15 1.536 39.01 1.636 41.55 1.312 33.32 .995 25.28 .970 24.64 .918 23.31
25 2.079 52.81 2.179 55.35 1.852 47.04 1.535 38.99 1.512 38.40 1.462 37.13
37 2.724 69.19 2.824 71.73 2.500 63.50 2.183 55.45 2.158 54.81 2.114 53.70
•For use only with SDH Ser ies Gray Backshell on pages 4-89 thru 4-90.
•Offered in 9, 15, 25, and 37 position plugs and sockets.
•Connector will accommodate 24-28 AWG wire.
•Offered with plain flanges and .120 mounting holes, threaded bushings, latch blocks, or latch blocks and
threaded bushings.
Plug with Latching Blocks Socket with Latching Blocks
4-39
4
Call Toll Free: 1 (800) 323-9612
Plain Flange Mounting Holes 4-40 Threaded Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 TE-9P TE-9P-30 TE-9PTB TE-9PTB-30
15 TA-15P TA-15P-30 TA-15PTB TA-15PTB-30
25 TB-25P TB-25P-30 TB-25PTB TB-25PTB-30
37 TC-37P TC-37P-30 TC-37PTB TC-37PTB-30
IDC All-Plastic Plugs
D-subminiature All-Plastic
IDC for Discrete Wire
T* Series
Ordering Information
Flange with Latch Block
Mounting Holes 4-40 Threaded Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 TE-9PLB TE-9PLB-30 TE-9PLB-1 TE-9PLB-1-30
15 TA-15PLB TA-15PLB-30 TA-15PLB-1 TA-15PLB-1-30
25 TB-25PLB TB-25PLB-30 TB-25PLB-1 TB-25PLB-1-30
37 TC-37PLB TC-37PLB-30 TC-37PLB-1 TC-37PLB-1-30
Plain Flange Mounting Holes 4-40 Threaded Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 TE-9S TE-9S-30 TE-9STB TE-9STB-30
15 TA-15S TA-15S-30 TA-15STB TA-15STB-30
25 TB-25S TB-25S-30 TB-25STB TB-25STB-30
37 TC-37S TC-37S-30 TC-37STB TC-37STB-30
IDC All-Plastic Sockets
Flange with Latch Block
Mounting Holes 4-40 Threaded Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 TE-9SLB TE-9SLB-30 TE-9SLB-1 TE-9SLB-1-30
15 TA-15SLB TA-15SLB-30 TA-15SLB-1 TA-15SLB-1-30
25 TB-25SLB TB-25SLB-30 TB-25SLB-1 TB-25SLB-1-30
37 TC-37SLB TC-37SLB-30 TC-37SLB-1 TC-37SLB-1-30
4-40
Call Toll Free: 1 (800) 323-9612
FEATURES
■
Offered in Wire Wrap and Solder Cup styles for wire termination and vertical style for
PCB mount.
■
Offered with .120 mounting holes, 4-40 clinch nuts, and dual float bushings.
■
Offered in 9, 15, 25, 37, and 50 position plugs and sockets.
■
Available with gold flash or 30µin. gold plating.
■
Approvals:
• UL Recogniz ed - Files E170218 (UL1977) and E130965 (UL1863).
• CSA Approved - File LR31996.
■
See pages 4-5 thru 4-10 for standard dimensions, contact arrang ements, and panel
mounting specifications.
MATERIALS
Insulator Material: Glass-filled polyester (white), UL 94V-O rated
Connector Shell: Steel with zinc plating and yellow chromate
finish or tin plating (grounding indents on plug)
4-40 Clinch Nut: Steel with cadmium plating and yellow
chromate finish
Dual Float Bushing: Stainless steel, passivated
ENVIRONMENTAL
Operating T emperature: -65°C to + 125°C
Shock: 50G peak per MIL-STD-202, Method 213, Condition G
Vibration: 12 cycles in three per pendicular directions @
10-2000Hz, per MIL-STD-202, Method 204,
Condition D
Moisture Resistance: 90-95% relative humidity @ 40°C for 96
hours per MIL-STD-202, Method 103
ELECTRICAL
Withstanding Voltage: Minimum 1250V RMS @ sea level
Current Rating: 5 Amps
Contact Resistance: 2.7 milliohms maximum
Insulation Resistance: 5000 megohms maximum (initial);
1000 megohms (minimum) after
environmental testing
MECHANICAL
Individual Contact Insertion and
Separation Force (minimum/maximum): 0.7 oz./12 oz.
Durability: 500 mating cycles
D-subminiature Metal Shell
Solder Cup, Vertical PCB Mount, and Wire Wrap
Basic D Series
4-41
4
Call Toll Free: 1 (800) 323-9612
• Available with stamped or machined contacts.
• Will accommodate up to 20 AWG wire.
Materials
• Contact Material: Copper Alloy
• Contact Plating:
- Stamped contacts with gold flash or 30µin. gold in mating area, gold flash or tin/lead on remainder. All over nickel.
- Screw machine contacts with gold flash or 30µin. gold. All over nickel.
D-subminiature Metal Shell
Solder Cup
Basic D Series
.312 (7.92)
.200 (5.08) REF.
Ordering Information
Stamped Contact with Gold Flash in Solder Cup
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9P DE-9P-30 DEE-9P DEE-9P-30 DEY-9P DEY-9P-30
15 DA-15P DA-15P-30 DAE-15P DAE-15P-30 DAY15P DAY-15P-30
25 DB-25P DB-25P-30 DBE-25P DBE-25P-30 DBY-25P DBY-25P-30
37 DC-37P DC-37P-30 DCE-37P DCE-37P-30 DCY-37P DCY-37P-30
50 DD-50P DD-50P-30 DDE-50P DDE-50P-30 DDY-50P DDY-50P-30
Solder Cup Plugs
Stamped Contact with Tin/Lead in Solder Cup
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9P-II DE-9P-II-30 DEE-9P-II DEE-9P-II-30 DEY-9P-II DEY-9P-II-30
15 DA-15P-II DA-15P-II-30 DAE-15P-II DAE-15P-II-30 DAY-15P-II DAY-15-PII-30
25 DB-25P-II DB-25P-II-30 DBE-25P-II DBE-25P-II-30 DBY-25P-II DBY-25-PII-30
37 DC-37P-II DC-37P-II-30 DCE-37P-II DCE-37P-II-30 DCY-37-P-II DCY-37-PII-30
50 DD-50P-II DD-50P-II-30 DDE-50P-II DDE-50P-II-30 DDY-50-P-II DDY-50-PII-30
Screw Machine Contact
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9P-SM DE-9P-SM-30 DEE-9P-SM DEE-9P-SM-30 DEY-9P-SM DEY-9P-SM-30
15 DA-15P-SM DA-15P-SM-30 DAE-15P-SM DAE-15P-SM-30 DAY-15P-SM DAY-15P-SM-30
25 DB-25P-SM DB-25P-SM-30 DBE-25P-SM DBE-25P-SM-30 DBY-25P-SM DBY-25P-SM-30
37 DC-37P-SM DC-37P-SM-30 DCE-37P-SM DCE-37P-SM-30 DCY-37P-SM DCY-37P-SM-30
50 DD-50P-SM DD-50P-SM-30 DDE-50P-SM DDE-50P-SM-30 DDY-50P-SM DDY-50P-SM-30
Zinc-Plated Shell with Yellow Chromate Finish
4-42
4
Call Toll Free: 1 (800) 323-9612
D-subminiature Metal Shell
Solder Cup
Basic D Series
Solder Cup Plugs (Cont’d)
Tin-Plated Shell with Grounding Indents
Stamped Contact with Gold Flash in Solder Cup
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9PTI DE-9PTI-30 DEE-9PTI DEE-9PTI-30 DEY-9PTI DEY-9PTI-30
15 DA-15PTI DA-15PTI-30 DAE-15PTI DAE-15PTI-30 DAY-15PTI DAY-15PTI-30
25 DB-25PTI DB-25PTI-30 DBE-25PTI DBE-25PTI-30 DBY-25PTI DBY-25PTI-30
37 DC-37PTI DC-37PTI-30 DCE-37PTI DCE-37PTI-30 DCY-37PTI DCY-37PTI-30
50 DD-50PTI DD-50PTI-30 DDE-50PTI DDE-50PTI-30 DDY-50PTI DDY-50PTI-30
Stamped Contact with Tin/Lead in Solder Cup
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9PTI-II DE-9PTI-II-30 DEE-9PTI-II DEE-9PTI-II-30 DEY-9PTI-II DEY-9PTI-II-30
15 DA-15PTI-II DA-15PTI-II-30 DAE-15PTI-II DAE-15PTI-II-30 DAY-15PTI-II DAY-15PTI-II-30
25 DB-25PTI-II DB-25PTI-II-30 DBE-25PTI-II DBE-25PTI-II-30 DBY-25PTI-II DBY-25PTI-II-30
37 DC-37PTI-II DC-37PTI-II-30 DCE-37PTI-II DCE-37PTI-II-30 DCY-37PTI-II DCY-37PTI-II-30
50 DD-50PTI-II DD-50PTI-II-30 DDE-50PTI-II DDE-50PTI-II-30 DDY-50PTI-II DDY-50PTI-II-30
Screw Machine Contact
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9PTI-SM DE-9PTI-SM-30 DEE-9PTI-SM DEE-9PTI-SM-30 DEY-9PTI-SM DEY-9PTI-SM-30
15 DA-15PTI-SM DA-15PTI-SM-30 DAE-15PTI-SM DAE-15PTI-SM-30 DAY-15PTI-SM DAY-15PTI-SM-30
25 DB-25PTI-SM DB-25PTI-SM-30 DBE-25PTI-SM DBE-25PTI-SM-30 DBY-25PTI-SM DBY-25PTI-SM-30
37 DC-37PTI-SM DC-37PTI-SM-30 DCE-37PTI-SM DCE-37PTI-SM-30 DCY-37PTI-SM DCY-37PTI-SM-30
50 DD-50PTI-SM DD-50PTI-SM-30 DDE-50PTI-SM DDE-50PTI-SM-30 DDY-50PTI-SM DDY-50PTI-SM-30
Ordering Information
4
Stamped Contact with Gold Flash in Solder Cup
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9S DE-9S-30 DEE-9S DEE-9S-30 DEY-9S DEY-9S-30
15 DA-15S DA-15S-30 DAE-15S DAE-15S-30 DAY-15S DAY-15S-30
25 DB-25S DB-25S-30 DBE-25S DBE-25S-30 DBY-25S DBY-25S-30
37 DC-37S DC-37S-30 DCE-37S DCE-37S-30 DCY-37S DCY-37S-30
50 DD-50S DD-50S-30 DDE-50S DDE-50S-30 DDY-50S DDY-50S-30
Solder Cup Sockets
Stamped Contact Tin/Lead in Solder Cup
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9S-II DE-9S-II-30 DEE-9S-II DEE-9S-II-30 DEY-9S-II DEY-9S-II-30
15 DA-15S-II DA-15S-II-30 DAE-15S-II DAE-15S-II-30 DAY-15S-II DAY-15S-II-30
25 DB-25S-II DB-25S-II-30 DBE-25S-II DBE-25S-II-30 DBY-25S-II DBY-25S-II-30
37 DC-37S-II DC-37S-II-30 DCE-37S-II DCE-37S-II-30 DCY-37S-II DCY-37S-II-30
50 DD-50S-II DD-50S-II-30 DDE-50S-II DDE-50S-II-30 DDY-50S-II DDY-50S-II-30
Screw Machine Contact
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9S-SM DE-9S-SM-30 DEE-9S-SM DEE-9S-SM-30 DEY-9S-SM DEY-9S-SM-30
15 DA-15S-SM DA-15S-SM-30 DAE-15S-SM DAE-15S-SM-30 DAY-15S-SM DAY-15S-SM-30
25 DB-25S-SM DB-25S-SM-30 DBE-25S-SM DBE-25S-SM-30 DBY-25S-SM DBY-25S-SM-30
37 DC-37S-SM DC-37S-SM-30 DCE-37S-SM DCE-37S-SM-30 DCY-37S-SM DCY-37S-SM-30
50 DD-50S-SM DD-50S-SM-30 DDE-50S-SM DDE-50S-SM-30 DDY-50S-SM DDY-50S-SM-30
Tin-Plated Shell
Zinc-Plated Shell with Yellow Chromate Finish
Stamped Contact with Gold Flash in Solder Cup
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9ST DE-9ST-30 DEE-9ST DEE-9ST-30 DEY-9ST DEY-9ST-30
15 DA-15ST DA-15ST-30 DAE-15ST DAE-15ST-30 DAY-15ST DAY-15ST-30
25 DB-25ST DB-25ST-30 DBE-25ST DBE-25ST-30 DBY-25ST DBY-25ST-30
37 DC-37ST DC-37ST-30 DCE-37ST DCE-37ST-30 DCY-37ST DCY-37ST-30
50 DD-50ST DD-50ST-30 DDE-50ST DDE-50ST-30 DDY-50ST DDY-50ST-30
Stamped Contact with Tin/Lead in Solder Cup
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9ST-II DE-9ST-II-30 DEE-9ST-II DEE-9ST-II-30 DEY-9ST-II DEY-9ST-II-30
15 DA-15ST-II DA-15ST-II-30 DAE-15ST-II DAE-15ST-II-30 DAY-15ST-II DAY-15ST-II-30
25 DB-25ST-II DB-25ST-II-30 DBE-25ST-II DBE-25ST-II-30 DBY-25ST-II DBY-25ST-II-30
37 DC-37ST-II DC-37ST-II-30 DCE-37ST-II DCE-37ST-II-30 DCY-37ST-II DCY-37ST-II-30
50 DD-50ST-II DD-50ST-II-30 DDE-50ST-II DDE-50ST-II-30 DDY-50ST-II DDY-50ST-II-30
Screw Machine Contact
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9ST-SM DE-9ST-SM-30 DEE-9ST-SM DEE-9ST-SM-30 DEY-9ST-SM DEY-9ST-SM-30
15 DA-15ST-SM DA-15ST-SM-30 DAE-15ST-SM DAE-15ST-SM-30 DAY-15ST-SM DAY-15ST-SM-30
25 DB-25ST-SM DB-25ST-SM-30 DBE-25ST-SM DBE-25ST-SM-30 DBY-25ST-SM DBY-25ST-SM-30
37 DC-37ST-SM DC-37ST-SM-30 DCE-37ST-SM DCE-37ST-SM-30 DCY-37ST-SM DCY-37ST-SM-30
50 DD-50ST-SM DD-50ST-SM-30 DDE-50ST-SM DDE-50ST-SM-30 DDY-50ST-SM DDY-50ST-SM-30
D-subminiature Metal Shell
Solder Cup
Basic D Series
Ordering Information
4-43 Call Toll Free: 1 (800) 323-9612
4-44
4
Call Toll Free: 1 (800) 323-9612
•.040" contact diameter.
• Short rear insulator provides low profile on PCB.
• Offered with .120 mounting holes, dual float bushings, or optional 4-40 clinch nuts.
Materials
•Contact Material: Socket - Phosphor bronze (machined), Plug - Brass (machined).
• Contact Plating: Gold flash or 30µin. gold over nickel.
D-subminiature Metal Shell
Vertical Dip Solder PCB
Basic D Series
.130 (3.30)
.104 (2.64)
.042 (1.07)
.038 (0.97)
.200 (5.08) REF.
Ordering Information
Vertical PCB Plugs
Zinc-Plated Shell with Yellow Chromate Finish
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9PV DE-9PV-30 DEE-9PV DEE-9PV-30 DEY-9PV DEY-9PV-30
15 DA-15PV DA-15PV-30 DAE-15PV DAE-15PV-30 DAY-15PV DAY-15PV-30
25 DB-25PV DB-25PV-30 DBE-25PV DBE-25PV-30 DBY-25PV DBY-25PV-30
37 DC-37PV DC-37PV-30 DCE-37PV DCE-37PV-30 DCY-37PV DCY-37PV-30
50 DD-50PV DD-50PV-30 DDE-50PV DDE-50PV-30 DCY-50PV DDY-50PV-30
Tin-Plated Shell with Grounding Indents
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9PVTI DE-9PVTI-30 DEE-9PVTI DEE-9PVTI-30 DEY-9PVTI DEY-9PVTI-30
15 DA-15PVTI DA-15PVTI-30 DAE-15PVTI DAE-15PVTI-30 DAY-15PVTI DAY-15PVTI-30
25 DB-25PVTI DB-25PVTI-30 DBE-25PVTI DBE-25PVTI-30 DBY-25PVTI DBY-25PVTI-30
37 DC-37PVTI DC-37PVTI-30 DCE-37PVTI DCE-37PVTI-30 DCY-37PVTI DCY-37PVTI-30
50 DD-50PVTI DD-50PVTI-30 DDE-50PVTI DDE-50PVTI-30 DCY-50PVTI DDY-50PVTI-30
Vertical PCB Sockets
Zinc-Plated Shell with Yellow Chromate Finish
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9SV DE-9SV-30 DEE-9SV DEE-9SV-30 DEY-9SV DEY-9SV-30
15 DA-15SV DA-15SV-30 DAE-15SV DAE-15SV-30 DAY-15SV DAY-15SV-30
25 DB-25SV DB-25SV-30 DBE-25SV DBE-25SV-30 DBY-25SV DBY-25SV-30
37 DC-37SV DC-37SV-30 DCE-37SV DCE-37SV-30 DCY-37SV DCY-37SV-30
50 DD-50SV DD-50SV-30 DDE-50SV DDE-50SV-30 DCY-50SV DDY-50SV-30
Tin-Plated Shell Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9SVT DE-9SVT-30 DEE-9SVT DEE-9SVT-30 DEY-9SVT DEY-9SVT-30
15 DA-15SVT DA-15SVT-30 DAE-15SVT DAE-15SVT-30 DAY-15SVT DAY-15SVT-30
25 DB-25SVT DB-25SVT-30 DBE-25SVT DBE-25SVT-30 DBY-25SVT DBY-25SVT-30
37 DC-37SVT DC-37SVT-30 DCE-37SVT DCE-37SVT-30 DCY-37SVT DCY-37SVT-30
50 DD-50SVT DD-50SVT-30 DDE-50SVT DDE-50SVT-30 DDY-50SVT DDY-50SVT-30
4-45
4
Call Toll Free: 1 (800) 323-9612
•Reliable wire wrap ter mination.
• Two contact lengths: .375" or .585".
• .025" square contact tails.
Materials
• Contact Mater ial: Copper alloy (machined).
• Contact Plating: Gold flash or 30µin. gold. All over nickel.
D-subminiature Metal Shell
Wire Wrap
Basic D Series
.375 (9.53)
.585 (14.86)or
.200 (5.08) REF.
Ordering Information
Wire Wrap Plugs
.375"Tail Length
Zinc-Plated Shell with Yellow Chromate Finish
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9P-F179 DE-9P-F179-30 DEE-9P-F179 DEE-9P-F179-30 DEY-9P-F179 DEY-9P-F179-30
15 DA-15P-F179 DA-15P-F179-30 DAE-15P-F179 DAE-15P-F179-30 DAY-15P-F179 DAY-15P-F179-30
25 DB-25P-F179 DB-25P-F179-30 DBE-25P-F179 DBE-25P-F179-30 DBY-25P-F179 DBY-25P-F179-30
37 DC-37P-F179 DC-37P-F179-30 DCE-37P-F179 DCE-37P-F179-30 DCY-37P-F179 DCY-37P-F179-30
50 DD-50P-F179 DD-50P-F179-30 DDE-50P-F179 DDE-50P-F179-30 DDY-50P-F179 DDY-50P-F179-30
Tin-Plated Shell with Grounding Indents
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9PTI-F179 DE-9PTI-F179-30 DEE-9PTI-F179 DEE-9PTI-F179-30 DEY-9PTI-F179 DEY-9PTI-F179-30
15 DA-15PTI-F179 DA-15PTI-F179-30 DAE-15PTI-F179 DAE-15PTI-F179-30 DAY-15PTI-F179 DAY-15PTI-F179-30
25 DB-25PTI-F179 DB-25PTI-F179-30 DBE-25PTI-F179 DBE-25PTI-F179-30 DBY-25PTI-F179 DBY-25PTI-F179-30
37 DC-37PTI-F179 DC-37PTI-F179-30 DCE-37PTI-F179 DCE-37PTI-F179-30 DCY-37PTI-F179 DCY-37PTI-F179-30
50 DD-50PTI-F179 DD-50PTI-F179-30 DDE-50PTI-F179 DDE-50PTI-F179-30 DDY-50PTI-F179 DDY-50PTI-F179-30
4-46
4
Call Toll Free: 1 (800) 323-9612
.585"Tail Length
Zinc-Plated Shell with Yellow Chromate Finish
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9P-F179C DE-9P-F179C-30 DEE-9P-F179C DEE-9PF-179C-30 DEY-9P-F179C DEY-9P-F179C-30
15 DA-15P-F179C DA-15P-F179C-30 DAE-15P-F179C DAE-15PF-179C-30 DAY-15P-F179C DAY-15P-F179C-30
25 DB-25P-F179C DB-25P-F179C-30 DBE-25P-F179C DBE-25PF-179C-30 DBY-25P-F179C DBY-25P-F179C-30
37 DC-37P-F179C DC-37P-F179C-30 DCE-37P-F179C DCE-37PF-179C-30 DCY-37P-F179C DCY-37P-F179C-30
50 DD-50P-F179C DD-50P-F179C-30 DDE-50P-F179C DDE-50PF-179C-30 DDY-50P-F179C DDY-50P-F179C-30
Tin-Plated Shell with Grounding Indents
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9PTI-F179C DE-9PTI-F179C-30 DEE-9PTI-F179C DEE-9PTI-F179C-30 DEY-9PTI-F179C DEY-9PTI-F179C-30
15 DA-15PTI-F179C DA-15PTI-F179C-30 DAE-15PTI-F179C DAE-15PTI-F179C-30 DAY-15PTI-F179C DAY-15PTI-F179C-30
25 DB-25PTI-F179C DB-25PTI-F179C-30 DBE-25PTI-F179C DBE-25PTI-F179C-30 DBY-25PTI-F179C DBY-25PTI-F179C-30
37 DC-37PTI-F179C DC-37PTI-F179C-30 DCE-37PTI-F179C DCE-37PTI-F179C-30 DCY-37PTI-F179C DCY-37PTI-F179C-30
50 DD-50PTI-F179C DD-50PTI-F179C-30 DDE-50PTI-F179C DDE-50PTI-F179C-30 DDY-50PTI-F179C DDY-50PTI-F179C-30
Wire Wrap Plugs (Cont’d)
D-subminiature Metal Shell
Wire Wrap
Basic D Series
Ordering Information
4-47
4
Call Toll Free: 1 (800) 323-9612
Wire Wrap Sockets
.375"Tail Length
Zinc-Plated Shell with Yellow Chromate Finish
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9S-F179 DE-9S-F179-30 DEE-9S-F179 DEE-9S-F179-30 DEY-9S-F179 DEY-9S-F179-30
15 DA-15S-F179 DA-15S-F179-30 DAE-15S-F179 DAE-15S-F179-30 DAY-15S-F179 DAY-15S-F179-30
25 DB-25S-F179 DB-25S-F179-30 DBE-25S-F179 DBE-25S-F179-30 DBY-25S-F179 DBY-25S-F179-30
37 DC-37S-F179 DC-37S-F179-30 DCE-37S-F179 DCE-37S-F179-30 DCY-37S-F179 DCY-37S-F179-30
50 DD-50S-F179 DD-50S-F179-30 DDE-50S-F179 DDE-50S-F179-30 DDY-50S-F179 DDY-50S-F179-30
Tin-Plated Shell Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9ST-F179 DE-9ST-F179-30 DEE-9ST-F179 DEE-9ST-F179-30 DEY-9ST-F179 DEY-9ST-F179-30
15 DA-15ST-F179 DA-15ST-F179-30 DAE-15ST-F179 DAE-15ST-F179-30 DAY-15ST-F179 DAY-15ST-F179-30
25 DB-25ST-F179 DB-25ST-F179-30 DBE-25ST-F179 DBE-25ST-F179-30 DBY-25ST-F179 DBY-25ST-F179-30
37 DC-37ST-F179 DC-37ST-F179-30 DCE-37ST-F179 DCE-37ST-F179-30 DCY-37ST-F179 DCY-37ST-F179-30
50 DD-50ST-F179 DD-50ST-F179-30 DDE-50ST-F179 DDE-50ST-F179-30 DDY-50ST-F179 DDY-50ST-F179-30
.585"Tail Length
Zinc-Plated Shell with Yellow Chromate Finish
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9S-F179C DE-9S-F179C-30 DEE-9S-F179C DEE-9S-F179C-30 DEY-9S-F179C DEY-9S-F179C-30
15 DA-15S-F179C DA-15S-F179C-30 DAE-15S-F179C DAE-15S-F179C-30 DAY-15S-F179C DAY-15S-F179C-30
25 DB-25S-F179C DB-25S-F179C-30 DBE-25S-F179C DBE-25S-F179C-30 DBY-25S-F179C DBY-25S-F179C-30
37 DC-37S-F179C DC-37S-F179C-30 DCE-37S-F179C DCE-37S-F179C-30 DCY-37S-F179C DCY-37S-F179C-30
50 DD-50S-F179C DD-50S-F179C-30 DDE-50S-F179C DDE-50S-F179C-30 DDY-50S-F179C DDY-50S-F179C-30
Tin-Plated Shell Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
Positions Gold Flash 30µin. Gold Gold Flash 30µin. Gold Gold Flash 30µin. Gold
9 DE-9ST-F179C DE-9ST-F179C-30 DEE-9ST-F179C DEE-9ST-F179C-30 DEY-9ST-F179C DEY-9ST-F179C-30
15 DA-15ST-F179C DA-15ST-F179C-30 DAE-15ST-F179C DAE-15ST-F179C-30 DAY-15ST-F179C DAY-15ST-F179C-30
25 DB-25ST-F179C DB-25ST-F179C-30 DBE-25ST-F179C DBE-25ST-F179C-30 DBY-25ST-F179C DBY-25ST-F179C-30
37 DC-37ST-F179C DC-37ST-F179C-30 DCE-37ST-F179C DCE-37ST-F179C-30 DCY-37ST-F179C DCY-37ST-F179C-30
50 DD-50ST-F179C DD-50ST-F179C-30 DDE-50ST-F179C DDE-50ST-F179C-30 DDY-50ST-F179C DDY-50ST-F179C-30
D-subminiature Metal Shell
Wire Wrap
Basic D Series
Ordering Information
4-48
Call Toll Free: 1 (800) 323-9612
FEATURES
■
Available in vertical and right-angle dip solder PCB connectors and solder cup version for
wire termination.
■
Commercial version of M24308 military connectors with tin-plated or zinc-plated shell
and 30µin. gold plating.
■
Monoblock green diallyl phthalate insulator for improved electrical performance .
■
Machined contacts for precision performance.
■
Offered in 9, 15, 25, 37, and 50 (except right-angle version) position plugs and sockets.
■
Offered with .120 mounting holes, 4-40 clinch nuts (except right-angle version), or dual
float bushings (except right-angle version).
■
Approvals:
• UL Recogniz ed - Files E170218 (UL1977)and E130965 (UL1863).
• CSA Approved - File LR31996.
■
See pages 4-5 thru 4-10 for standard dimensions, contact arrang ements, and panel
mounting specifications.
MATERIALS
Insulator Material: Glass-filled diallyl phthalate (green)
UL 94V-0 rated
Connector Shell: Steel with zinc plating and yellow chromate finish or
tin plating (grounding indents on plug)
Contact Material: Plug - Brass (machined), Socket - Phosphor
bronze (machined)
Contact Plating: 30µin. gold over nickel
4-40 Clinch Nut: Steel with cadmium plating and yellow chromate finish
Dual Float Bushing: Stainless steel, passivated
ENVIRONMENTAL
Operating T emperature: -65°C to + 125°C
Shock: 50G peak per MIL-STD-202, Method 213, Condition G
Vibration: 12 cycles in three per pendicular directions @ 10-2000Hz, per
MIL-STD-202, Method 204, Condition D
Moisture Resistance: 90-95% relative humidity @ 40°C for 96 hours per
MIL-STD-202, Method 103
ELECTRICAL
Withstanding Voltage: Minimum 1250V RMS @ sea level
Current Rating: 5 Amps
Contact Resistance: 2.7 milliohms maximum
Insulation Resistance: 5000 megohms maximum (initial);
1000 megohms (minimum) after
environmental testing
MECHANICAL
Individual Contact Insertion and
Separation Force (minimum/maximum): 0.7 oz./12 oz.
Durability: 500 mating cycles
D-subminiature Metal Shell
Solder Cup, Right-Angle, and Vertical PCB
Series 1 - High Reliability
4-49
4
Call Toll Free: 1 (800) 323-9612
Solder Cup Plugs
Zinc-Plated Shell with Yellow Chromate Finish Tin-Plated Shell with Grounding Indents
Positions Mounting Hole 4-40 Clinch Nut Dual Float Bushings Mounting Hole 4-40 Clinch Nut Dual Float Bushings
9 DEM-9P DEME-9P DEMY-9P DEM-9PTI DEME-9PTI DEMY-9PTI
15 DAM-15P DAME-15P DAMY-15P DAM-15PTI DAME-15PTI DAMY-15PTI
25 DBM-25P DBME-25P DBMY-25P DBM-25PTI DBME-25PTI DBMY-25PTI
37 DCM-37P DCME-37P DCMY-37P DCM-37PTI DCME-37PTI DCMY-37PTI
50 DDM-50P DDME-50P DDMY-50P DDM-50PTI DDME-50PTI DDMY-50PTI
Zinc-Plated Shell with Yellow Chromate Finish Tin-Plated Shell
Positions Mounting Hole 4-40 Clinch Nut Dual Float Bushings Mounting Hole 4-40 Clinch Nut Dual Float Bushings
9 DEM-9S DEME-9S DEMY-9S DEM-9ST DEME-9ST DEMY-9ST
15 DAM-15S DAME-15S DAMY-15S DAM-15ST DAME-15ST DAMY-15ST
25 DBM-25S DBME-25S DBMY-25S DBM-25ST DBME-25ST DBMY-25ST
37 DCM-37S DCME-37S DCMY-37S DCM-37ST DCME-37ST DCMY-37ST
50 DDM-50S DDME-50S DDMY-50S DDM-50ST DDME-50ST DDMY-50ST
D-subminiature Metal Shell
Solder Cup
Series 1 - High Reliability
.390 (9.91)
.200 (5.08) REF.
Ordering Information
Solder Cup Sockets
• Will accommodate up to 20 AWG wire.
4-50
4
Call Toll Free: 1 (800) 323-9612
Zinc-Plated Shell with Yellow Chromate Finish
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Positions .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Diameter Diameter Diameter Diameter Diameter Diameter
9 DEM-9PD DEM-9PL DEM-9PS DEM-9PA DEM-9PG DEM-9PW
15 DAM-15PD DAM-15PL DAM-15PS DAM-15PA DAM-15PG DAM-15PW
25 DBM-25PD DBM-25PL DBM-25PS DBM-25PA DBM-25PG DBM-25PW
37 DCM-37PD DCM-37PL DCM-37PS DCM-37PA DCM-37PG DCM-37PW
Tin-Plated Shell with Grounding Indents
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Positions .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Diameter Diameter Diameter Diameter Diameter Diameter
9 DEM-9PDTI DEM-9PLTI DEM-9PSTI DEM-9PATI DEM-9PGTI DEM-9PWTI
15 DAM-15PDTI DAM-15PLTI DAM-15PSTI DAM-15PATI DAM-15PGTI DAM-15PWTI
25 DBM-25PDTI DBM-25PLTI DBM-25PSTI DBM-25PATI DBM-25PGTI DBM-25PWTI
37 DCM-37PDTI DCM-37PLTI DCM-37PSTI DCM-37PATI DCM-37PGTI DCM-37PWTI
Right-Angle PCB Plugs
•.283" footpr int uses minimal board space.
• Available with three contact tail lengths (.125", .158", and .185") and two contact diameters (.030" and .040").
Materials
• Mounting bracket: Black nylon. Can be removed if necessar y.
Ordering Information
D-subminiature Metal Shell
Right-Angle Dip Solder PCB
Series 1 - High Reliability
4-51
4
Call Toll Free: 1 (800) 323-9612
Zinc-Plated Shell with Yellow Chromate Finish
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Positions .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Diameter Diameter Diameter Diameter Diameter Diameter
9 DEM-9SD DEM-9SL DEM-9SS DEM-9SA DEM-9SG DEM-9SW
15 DAM-15SD DAM-15SL DAM-15SS DAM-15SA DAM-15SG DAM-15SW
25 DBM-25SD DBM-25SL DBM-25SS DBM-25SA DBM-25SG DBM-25SW
37 DCM-37SD DCM-37SL DCM-37SS DCM-37SA DCM-37SG DCM-37SW
Right-Angle PCB Sockets
Tin-Plated Shell
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Positions .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Diameter Diameter Diameter Diameter Diameter Diameter
9 DEM-9SDT DEM-9SLT DEM-9SST DEM-9SAT DEM-9SGT DEM-9SWT
15 DAM-15SDT DAM-15SLT DAM-15SST DAM-15SAT DAM-15SGT DAM-15SWT
25 DBM-25SDT DBM-25SLT DBM-25SST DBM-25SAT DBM-25SGT DBM-25SWT
37 DCM-37SDT DCM-37SLT DCM-37SST DCM-37SAT DCM-37SGT DCM-37SWT
Ordering Information
D-subminiature Metal Shell
Right-Angle Dip Solder PCB
Series 1 - High Reliability
4-52
4
Call Toll Free: 1 (800) 323-9612
D-subminiature Metal Shell
Vertical Dip Solder PCB
Series 1 - High Reliability
• Available with three contact tail lengths (.125", .158", and .185") and two contact diameters (.030" and .040").
SEE CHART
SEE CHART
.200 REF.
Vertical PCB Plugs
Ordering Information
Zinc-Plated Shell with Yellow Chromate Finish
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Positions .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Diameter Diameter Diameter Diameter Diameter Diameter
9 DEM-9PE DEM-9PM DEM-9PZ DEM-9PB DEM-9PH DEM-9PX
15 DAM-15PE DAM-15PM DAM-15PZ DAM-15PB DAM-15PH DAM-15PX
25 DBM-25PE DBM-25PM DBM-25PZ DBM-25PB DBM-25PH DBM-25PX
37 DCM-37PE DCM-37PM DCM-37PZ DCM-37PB DCM-37PH DCM-37PX
50 DDM-50PE DDM-50PM DDM-50PZ DDM-50PB DDM-50PH DDM-50PX
Zinc-Plated Shell with Yellow Chromate Finish and 4-40 Clinch Nuts
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Positions .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Diameter Diameter Diameter Diameter Diameter Diameter
9 DEME-9PE DEME-9PM DEME-9PZ DEME-9PB DEME-9PH DEME-9PX
15 DAME-15PE DAME-15PM DAME-15PZ DAME-15PB DAME-15PH DAME-15PX
25 DBME-25PE DBME-25PM DBME-25PZ DBME-25PB DBME-25PH DBME-25PX
37 DCME-37PE DCME-37PM DCME-37PZ DCME-37PB DCME-37PH DCME-37PX
50 DDME-50PE DDME-50PM DDME-50PZ DDME-50PB DDME-50PH DDME-50PX
Zinc-Plated Shell with Yellow Chromate Finish and Dual Float Bushings
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Positions .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Diameter Diameter Diameter Diameter Diameter Diameter
9 DEMY-9PE DEMY-9PM DEMY-9PZ DEMY-9PB DEMY-9PH DEMY-9PX
15 DAMY-15PE DAMY-15PM DAMY-15PZ DAMY-15PB DAMY-15PH DAMY-15PX
25 DBMY-25PE DBMY-25PM DBMY-25PZ DBMY-25PB DBMY-25PH DBMY-25PX
37 DCMY-37PE DCMY-37PM DCMY-37PZ DCMY-37PB DCMY-37PH DCMY-37PX
50 DDMY-50PE DDMY-50PM DDMY-50PZ DDMY-50PB DDMY-50PH DDMY-50PX
4-53
4
Call Toll Free: 1 (800) 323-9612
Vertical PCB Plugs (Cont’d)
Tin-Plated Shell with Grounding Indents
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Positions .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Diameter Diameter Diameter Diameter Diameter Diameter
9 DEM-9PETI DEM-9PMTI DEM-9PZTI DEM-9PBTI DEM-9PHTI DEM-9PXTI
15 DAM-15PETI DAM-15PMTI DAM-15PZTI DAM-15PBTI DAM-15PHTI DAM-15PXTI
25 DBM-25PETI DBM-25PMTI DBM-25PZTI DBM-25PBTI DBM-25PHTI DBM-25PXTI
37 DCM-37PETI DCM-37PMTI DCM-37PZTI DCM-37PBTI DCM-37PHTI DCM-37PXTI
50 DDM-50PETI DDM-50PMTI DDM-50PZTI DDM-50PBTI DDM-50PHTI DDM-50PXTI
Tin-Plated Shell with Grounding Indents and 4-40 Clinch Nuts
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Positions .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Diameter Diameter Diameter Diameter Diameter Diameter
9 DEME-9PETI DEME-9PMTI DEME-9PZTI DEME-9PBTI DEME-9PHTI DEME-9PXTI
15 DAME-15PETI DAME-15PMTI DAME-15PZTI DAME-15PBTI DAME-15PHTI DAME-15PXTI
25 DBME-25PETI DBME-25PMTI DBME-25PZTI DBME-25PBTI DBME-25PHTI DBME-25PXTI
37 DCME-37PETI DCME-37PMTI DCME-37PZTI DCME-37PBTI DCME-37PHTI DCME-37PXTI
50 DDME-50PETI DDME-50PMTI DDME-50PZTI DDME-50PBTI DDME-50PHTI DDME-50PXTI
Tin-Plated Shell with Grounding Indents and Dual Float Bushings
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Positions .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Diameter Diameter Diameter Diameter Diameter Diameter
9 DEMY-9PETI DEMY-9PMTI DEMY-9PZTI DEMY-9PBTI DEMY-9PHTI DEMY-9PXTI
15 DAMY-15PETI DAMY-15PMTI DAMY-15PZTI DAMY-15PBTI DAMY-15PHTI DAMY-15PXTI
25 DBMY-25PETI DBMY-25PMTI DBMY-25PZTI DBMY-25PBTI DBMY-25PHTI DBMY-25PXTI
37 DCMY-37PETI DCMY-37PMTI DCMY-37PZTI DCMY-37PBTI DCMY-37PHTI DCMY-37PXTI
50 DDMY-50PETI DDMY-50PMTI DDMY-50PZTI DDMY-50PBTI DDMY-50PHTI DDMY-50PXTI
D-subminiature Metal Shell
Vertical Dip Solder PCB
Series 1 - High Reliability
Ordering Information
Vertical PCB Sockets
Zinc-Plated Shell with Yellow Chromate Finish
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Positions .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Diameter Diameter Diameter Diameter Diameter Diameter
9 DEM-9SE DEM-9SM DEM-9SZ DEM-9SB DEM-9SH DEM-9SX
15 DAM-15SE DAM-15SM DAM-15SZ DAM-15SB DAM-15SH DAM-15SX
25 DBM-25SE DBM-25SM DBM-25SZ DBM-25SB DBM-25SH DBM-25SX
37 DCM-37SE DCM-37SM DCM-37SZ DCM-37SB DCM-37SH DCM-37SX
50 DDM-50SE DDM-50SM DDM-50SZ DDM-50SB DDM-50SH DDM-50SX
4-54
4
Call Toll Free: 1 (800) 323-9612
D-subminiature Metal Shell
Vertical Dip Solder PCB
Series 1 - High Reliability
Vertical PCB Sockets (Cont’d)
Zinc-Plated Shell with Yellow Chromate Finish and 4-40 Clinch Nuts
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Positions .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Diameter Diameter Diameter Diameter Diameter Diameter
9 DEME-9SE DEME-9SM DEME-9SZ DEME-9SB DEME-9SH DEME-9SX
15 DAME-15SE DAME-15SM DAME-15SZ DAME-15SB DAME-15SH DAME-15SX
25 DBME-25SE DBME-25SM DBME-25SZ DBME-25SB DBME-25SH DBME-25SX
37 DCME-37SE DCME-37SM DCME-37SZ DCME-37SB DCME-37SH DCME-37SX
50 DDME-50SE DDME-50SM DDME-50SZ DDME-50SB DDME-50SH DDME-50SX
Zinc-Plated Shell with Yellow Chromate Finish and Dual Float Bushings
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Positions .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Diameter Diameter Diameter Diameter Diameter Diameter
9 DEMY-9SE DEMY-9SM DEMY-9SZ DEMY-9SB DEMY-9SH DEMY-9SX
15 DAMY-15SE DAMY-15SM DAMY-15SZ DAMY-15SB DAMY-15SH DAMY-15SX
25 DBMY-25SE DBMY-25SM DBMY-25SZ DBMY-25SB DBMY-25SH DBMY-25SX
37 DCMY-37SE DCMY-37SM DCMY-37SZ DCMY-37SB DCMY-37SH DCMY-37SX
50 DDMY-50SE DDMY-50SM DDMY-50SZ DDMY-50SB DDMY-50SH DDMY-50SX
Tin-Plated Shell
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Positions .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Diameter Diameter Diameter Diameter Diameter Diameter
9 DEM-9SET DEM-9SMT DEM-9SZT DEM-9SBT DEM-9SHT DEM-9SXT
15 DAM-15SET DAM-15SMT DAM-15SZT DAM-15SBT DAM-15SHT DAM-15SXT
25 DBM-25SET DBM-25SMT DBM-25SZT DBM-25SBT DBM-25SHT DBM-25SXT
37 DCM-37SET DCM-37SMT DCM-37SZT DCM-37SBT DCM-37SHT DCM-37SXT
50 DDM-50SET DDM-50SMT DDM-50SZT DDM-50SBT DDM-50SHT DDM-50SXT
Tin-Plated Shell with 4-40 Clinch Nuts
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Positions .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Diameter Diameter Diameter Diameter Diameter Diameter
9 DEME-9SET DEME-9SMT DEME-9SZT DEME-9SBT DEME-9SHT DEME-9SXT
15 DAME-15SET DAME-15SMT DAME-15SZT DAME-15SBT DAME-15SHT DAME-15SXT
25 DBME-25SET DBME-25SMT DBME-25SZT DBME-25SBT DBME-25SHT DBME-25SXT
37 DCME-37SET DCME-37SMT DCME-37SZT DCME-37SBT DCME-37SHT DCME-37SXT
50 DDME-50SET DDME-50SMT DDME-50SZT DDME-50SBT DDME-50SHT DDME-50SXT
Tin-Plated Shell with Dual Float Bushings
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Positions .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Diameter Diameter Diameter Diameter Diameter Diameter
9 DEMY-9SET DEMY-9SMT DEMY-9SZT DEMY-9SBT DEMY-9SHT DEMY-9SXT
15 DAMY-15SET DAMY-15SMT DAMY-15SZT DAMY-15SBT DAMY-15SHT DAMY-15SXT
25 DBMY-25SET DBMY-25SMT DBMY-25SZT DBMY-25SBT DBMY-25SHT DBMY-25SXT
37 DCMY-37SET DCMY-37SMT DCMY-37SZT DCMY-37SBT DCMY-37SHT DCMY-37SXT
50 DDMY-50SET DDMY-50SMT DDMY-50SZT DDMY-50SBT DDMY-50SHT DDMY-50SXT
Ordering Information
4-55
4
Call Toll Free: 1 (800) 323-9612
D-subminiature Metal Shell - Combination Layout
Solder Cup and Vertical PCB
Series 1 - High Reliability
•Shell Sizes (equivalent to standard size): E (Size 9), A (Size 15 ), B (Size 25 ), C (Size 25 ), and D (Size 25 ).
•Offered in a variety of combination layouts in ver tical style for PCB mount or solder cup style for wire ter mination.
•Signal Contacts (Size 20) are fixed and non-removable.
- Ver tical Dip Solder Contacts are available with three contact tail
lengths (.125", .158", and .185") and two contact diameters (.030" and .040").
•Removable Coaxial, High Power, High Voltage contacts must be ordered separately.
•See Series 1 page 4-48 for specifications.
•Available with 30µin. or 50µin. gold contact plating.
Materials
Connector Shell:
• Steel with zinc or cadmium plating and yellow chromate finish or tin plating (grounding indents on plug).
4-56
4
Call Toll Free: 1 (800) 323-9612
D-subminiature Metal Shell - Combination Layout
Series 1 - High Reliability
NOTE: Mating face of plug is shown, socket is mirror image. Position numbers are for male only.
Shell Size E A A A
Contact Arrangement 5W1 3W3 7W2 11W1
Signal Contacts 4 0 5 10
Coax Cavities 1 1 1 1
Shell Size B B B B
Contact Arrangement 9W4 13W3 17W2 21W1
Signal Contacts 5 10 15 20
Coax Cavities 4 3 2 1
Shell Size CC C
Contact Arrangement 13W6 8W8 17W5
Signal Contacts 7 0 12
Coax Cavities 5 8 5
Shell Size CC C
Contact Arrangement 21WA-4 25W3 27W2
Signal Contacts 17 22 25
Coax Cavities 4 3 2
Shell Size D D D
Contact Arrangement 24W7 36W4 43W2
Signal Contacts 25 32 41
Coax Cavities 2 4 2
Combination Layouts
4-57
4
Call Toll Free: 1 (800) 323-9612
D-subminiature Metal Shell - Combination Layout
Solder Cup
Series 1 - High Reliability
Shell Zinc-Plated Shell with Yellow Chromate Finish Tin-Plated Shell with Grounding Indents
Size Mounting Holes 4-40 Clinch Nuts Dual Float Bushings Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
EDEM-XXWX*P DEME XXWX*P DEMY-XXWX*P DEM-XXWX*PTI DEME-XXWX*PTI DEMY-XXWX*PTI
ADAM-XXWX*P DAME-XXWX*P DAMY-XXWX*P DAM-XXWX*PTI DAME-XXWX*PTI DAMY-XXWX*PTI
BDBM-XXWX*P DBME-XXWX*P DBMY-XXWX*P DBM-XXWX*PTI DBME-XXWX*PTI DBMY-XXWX*PTI
CDCM-XXWX*P DCME-XXWX*P DCMY-XXWX*P DCM-XXWX*PTI DCME-XXWX*PTI DCMY-XXWX*PTI
DDDM-XXWX*P DDME-XXWX*P DDMY-XXWX*P DDM-XXWX*PTI DDME-XXWX*PTI DDMY-XXWX*PTI
Combo D-sub Solder Cup Plugs
30µin. Gold Plating
*Note: XXWX means inser t combo layout contact arrangement from page 4-56 in catalog number i.e., 13W3.
Shell Zinc-Plated Shell with Yellow Chromate Finish Tin-Plated Shell
Size Mounting Holes 4-40 Clinch Nuts Dual Float Bushings Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
EDEM-XXWX*S DEME-XXWX*S DEMY-XXWX*S DEM-XXWX*ST DEME-XXWX*ST DEMY-XXWX*ST
ADAM-XXWX*S DAME-XXWX*S DAMY-XXWX*S DAM-XXWX*ST DAME-XXWX*ST DAMY-XXWX*ST
BDBM-XXWX*S DBME-XXWX*S DBMY-XXWX*S DBM-XXWX*ST DBME-XXWX*ST DBMY-XXWX*ST
CDCM-XXWX*S DCME-XXWX*S DCMY-XXWX*S DCM-XXWX*ST DCME-XXWX*ST DCMY-XXWX*ST
DDDM-XXWX*S DDME-XXWX*S DDMY-XXWX*S DDM-XXWX*ST DDME-XXWX*ST DDMY-XXWX*ST
Cadmium-Plated Shell with Yellow Chromate Finish
Shell Plugs Sockets
Size Mounting Holes 4-40 Clinch Nuts Dual Float Bushings Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
EDEMM-XXWX*P DEMME-XXWX*P DEMMY-XXWX*P DEMM-XXWX*S DEMME-XXWX*S DEMMY-XXWX*S
ADAMM-XXWX*P DAMME-XXWX*P DAMMY-XXWX*P DAMM-XXWX*S DAMME-XXWX*S DAMMY-XXWX*S
BDBMM-XXWX*P DBMME-XXWX*P DBMMY-XXWX*P DBMM-XXWX*S DBMME-XXWX*S DBMMY-XXWX*S
CDCMM-XXWX*P DCMME-XXWX*P DCMMY-XXWX*P DCMM-XXWX*S DCMME-XXWX*S DCMMY-XXWX*S
DDDMM-XXWX*P DDMME-XXWX*P DDMMY-XXWX*P DDMM-XXWX*S DDMME-XXWX*S DDMMY-XXWX*S
Ordering Information
Combo D-sub Solder Cup Sockets
30µin. Gold Plating
Combo D-sub Solder Cup Plugs and Sockets
50µin. Gold Plating
• Will accommodate up to 20 AWG wire.
4-58
4
Call Toll Free: 1 (800) 323-9612
30µin. Gold Plating
Zinc-Plated Shell with Yellow Chromate Finish and Mounting Holes
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
.030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Shell Size Diameter Diameter Diameter Diameter Diameter Diameter
E DEM-XXWX*PE DEM-XXWX*PM DEM-XXWX*PZ DEM-XXWX*PB DEM-XXWX*PH DEM-XXWX*PX
A DAM-XXWX*PE DAM-XXWX*PM DAM-XXWX*PZ DAM-XXWX*PB DAM-XXWX*PH DAM-XXWX*PX
B DBM-XXWX*PE DBM-XXWX*PM DBM-XXWX*PZ DBM-XXWX*PB DBM-XXWX*PH DBM-XXWX*PX
C DCM-XXWX*PE DCM-XXWX*PM DCM-XXWX*PZ DCM-XXWX*PB DCM-XXWX*PH DCM-XXWX*PX
D DDM-XXWX*PE DDM-XXWX*PM DDM-XXWX*PZ DDM-XXWX*PB DDM-XXWX*PH DDM-XXWX*PX
* Note: XXWX means inser t combo layout contact arrangement from page 4-56 in catalog number i.e., 13W3.
Zinc-Plated Shell with Yellow Chromate Finish and 4-40 Clinch Nuts
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
.030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Shell Size Diameter Diameter Diameter Diameter Diameter Diameter
E DEME-XXWX*PE DEME-XXWX*PM DEME-XXWX*PZ DEME-XXWX*PB DEME-XXWX*PH DEME-XXWX*PX
A DAME-XXWX*PE DAME-XXWX*PM DAME-XXWX*PZ DAME-XXWX*PB DAME-XXWX*PH DAME-XXWX*PX
B DBME-XXWX*PE DBME-XXWX*PM DBME-XXWX*PZ DBME-XXWX*PB DBME-XXWX*PH DBME-XXWX*PX
C DCME-XXWX*PE DCME-XXWX*PM DCME-XXWX*PZ DCME-XXWX*PB DCME-XXWX*PH DCME-XXWX*PX
D DDME-XXWX*PE DDME-XXWX*PM DDME-XXWX*PZ DDME-XXWX*PB DDME-XXWX*PH DDME-XXWX*PX
Zinc-Plated Shell with Yellow Chromate Finish and Dual Float Bushings
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
.030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Shell Size Diameter Diameter Diameter Diameter Diameter Diameter
E DEMY-XXWX*PE DEMY-XXWX*PM DEMY-XXWX*PZ DEMY-XXWX*PB DEMY-XXWX*PH DEMY-XXWX*PX
A DAMY-XXWX*PE DAMY-XXWX*PM DAMY-XXWX*PZ DAMY-XXWX*PB DAMY-XXWX*PH DAMY-XXWX*PX
B DBMY-XXWX*PE DBMY-XXWX*PM DBMY-XXWX*PZ DBMY-XXWX*PB DBMY-XXWX*PH DBMY-XXWX*PX
C DCMY-XXWX*PE DCMY-XXWX*PM DCMY-XXWX*PZ DCMY-XXWX*PB DCMY-XXWX*PH DCMY-XXWX*PX
D DDMY-XXWX*PE DDMY-XXWX*PM DDMY-XXWX*PZ DDMY-XXWX*PB DDMY-XXWX*PH DDMY-XXWX*PX
Tin-Plated Shell with Grounding Indents and Mounting Holes
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
.030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Shell Size Diameter Diameter Diameter Diameter Diameter Diameter
E DEM-XXWX*PETI DEM-XXWX*PMTI DEM-XXWX*PZTI DEM-XXWX*PBTI DEM-XXWX*PHTI DEM-XXWX*PXTI
A DAM-XXWX*PETI DAM-XXWX*PMTI DAM-XXWX*PZTI DAM-XXWX*PBTI DAM-XXWX*PHTI DAM-XXWX*PXTI
B DBM-XXWX*PETI DBM-XXWX*PMTI DBM-XXWX*PZTI DBM-XXWX*PBTI DBM-XXWX*PHTI DBM-XXWX*PXTI
C DCM-XXWX*PETI DCM-XXWX*PMTI DCM-XXWX*PZTI DCM-XXWX*PBTI DCM-XXWX*PHTI DCM-XXWX*PXTI
D DDM-XXWX*PETI DDM-XXWX*PMTI DDM-XXWX*PZTI DDM-XXWX*PBTI DDM-XXWX*PHTI DDM-XXWX*PXTI
Combo D-sub Vertical PCB Plugs
D-subminiature Metal Shell - Combination Layout
Vertical PCB Dip Solder Tails
Series 1 - High Reliability
Ordering Information
50µin. Gold Plating
Cadmium-Plated Shell with Yellow Chromate Finish and Mounting Holes
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Shell .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Size Diameter Diameter Diameter Diameter Diameter Diameter
E DEMM-XXWX*PE DEMM-XXWX*PM DEMM-XXWX*PZ DEMM-XXWX*PB DEMM-XXWX*PH DEMM-XXWX*PX
A DAMM-XXWX*PE DAMM-XXWX*PM DAMM-XXWX*PZ DAMM-XXWX*PB DAMM-XXWX*PH DAMM-XXWX*PX
B DBMM-XXWX*PE DBMM-XXWX*PM DBMM-XXWX*PZ DBMM-XXWX*PB DBMM-XXWX*PH DBMM-XXWX*PX
C DCMM-XXWX*PE DCMM-XXWX*PM DCMM-XXWX*PZ DCMM-XXWX*PB DCMM-XXWX*PH DCMM-XXWX*PX
D DDMM-XXWX*PE DDMM-XXWX*PM DDMM-XXWX*PZ DDMM-XXWX*PB DDMM-XXWX*PH DDMM-XXWX*PX
Cadmium-Plated Shell with Yellow Chromate Finish and 4-40 Clinch Nuts
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Shell .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Size Diameter Diameter Diameter Diameter Diameter Diameter
E DEMME-XXWX*PE DEMME-XXWX*PM DEMME-XXWX*PZ DEMME-XXWX*PB DEMME-XXWX*PH DEMME-XXWX*PX
A DAMME-XXWX*PE DAMME-XXWX*PM DAMME-XXWX*PZ DAMME-XXWX*PB DAMME-XXWX*PH DAMME-XXWX*PX
B DBMME-XXWX*PE DBMME-XXWX*PM DBMME-XXWX*PZ DBMME-XXWX*PB DBMME-XXWX*PH DBMME-XXWX*PX
C DCMME-XXWX*PE DCMME-XXWX*PM DCMME-XXWX*PZ DCMME-XXWX*PB DCMME-XXWX*PH DCMME-XXWX*PX
D DDMME-XXWX*PE DDMME-XXWX*PM DDMME-XXWX*PZ DDMME-XXWX*PB DDMME-XXWX*PH DDMME-XXWX*PX
4-59
4
Call Toll Free: 1 (800) 323-9612
D-subminiature Metal Shell - Combination Layout
Vertical PCB Dip Solder Tails
Series 1 - High Reliability
*Note: XXWX means insert combo layout contact arrangement from page 4-56 in catalog number i.e., 13W3.
Cadmium-Plated Shell with Yellow Chromate Finish and Dual Float Bushings
.125 T ail Length .158 Tail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Shell .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Size Diameter Diameter Diameter Diameter Diameter Diameter
E DEMMY-XXWX*PE DEMMY-XXWX*PM DEMMY-XXWX*PZ DEMMY-XXWX*PB DEMMY-XXWX*PH DEMMY-XXWX*PX
A DAMMY-XXWX*PE DAMMY-XXWX*PM DAMMY-XXWX*PZ DAMMY-XXWX*PB DAMMY-XXWX*PH DAMMY-XXWX*PX
B DBMMY-XXWX*PE DBMMY-XXWX*PM DBMMY-XXWX*PZ DBMMY-XXWX*PB DBMMY-XXWX*PH DBMMY-XXWX*PX
C DCMMY-XXWX*PE DCMMY-XXWX*PM DCMMY-XXWX*PZ DCMMY-XXWX*PB DCMMY-XXWX*PH DCMMY-XXWX*PX
D DDMMY-XXWX*PE DDMMY-XXWX*PM DDMMY-XXWX*PZ DDMMY-XXWX*PB DDMMY-XXWX*PH DDMMY-XXWX*PX
Ordering Information
Tin-Plated Shell with Grounding Indents and 4-40 Clinch Nuts
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Shell .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Size Diameter Diameter Diameter Diameter Diameter Diameter
E DEME-XXWX*PETI DEME-XXWX*PMTI DEME-XXWX*PZTI DEME-XXWX*PBTI DEME-XXWX*PHTI DEME-XXWX*PXTI
A DAME-XXWX*PETI DAME-XXWX*PMTI DAME-XXWX*PZTI DAME-XXWX*PBTI DAME-XXWX*PHTI DAME-XXWX*PXTI
B DBME-XXWX*PETI DBME-XXWX*PMTI DBME-XXWX*PZTI DBME-XXWX*PBTI DBME-XXWX*PHTI DBME-XXWX*PXTI
C DCME-XXWX*PETI DCME-XXWX*PMTI DCME-XXWX*PZTI DCME-XXWX*PBTI DCME-XXWX*PHTI DCME-XXWX*PXTI
D DDME-XXWX*PETI DDME-XXWX*PMTI DDME-XXWX*PZTI DDME-XXWX*PBTI DDME-XXWX*PHTI DDME-XXWX*PXTI
Tin-Plated Shell with Grounding Indents and Dual Float Bushings
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Shell .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Size Diameter Diameter Diameter Diameter Diameter Diameter
E DEMY-XXWX*PETI DEMY-XXWX*PMTI DEMY-XXWX*PZTI DEMY-XXWX*PBTI DEMY-XXWX*PHTI DEMY-XXWX*PXTI
A DAMY-XXWX*PETI DAMY-XXWX*PMTI DAMY-XXWX*PZTI DAMY-XXWX*PBTI DAMY-XXWX*PHTI DAMY-XXWX*PXTI
B DBMY-XXWX*PETI DBMY-XXWX*PMTI DBMY-XXWX*PZTI DBMY-XXWX*PBTI DBMY-XXWX*PHTI DBMY-XXWX*PXTI
C DCMY-XXWX*PETI DCMY-XXWX*PMTI DCMY-XXWX*PZTI DCMY-XXWX*PBTI DCMY-XXWX*PHTI DCMY-XXWX*PXTI
D DDMY-XXWX*PETI DDMY-XXWX*PMTI DDMY-XXWX*PZTI DDMY-XXWX*PBTI DDMY-XXWX*PHTI DDMY-XXWX*PXTI
30µin. Gold Plating (Cont’d)
Combo D-sub Vertical PCB Plugs
4-60
4
Call Toll Free: 1 (800) 323-9612
Zinc-Plated Shell with Yellow Chromate Finish and Mounting Holes
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Shell .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Size Diameter Diameter Diameter Diameter Diameter Diameter
E DEM-XXWX*SE DEM-XXWX*SM DEM-XXWX*SZ DEM-XXWX*SB DEM-XXWX*SH DEM-XXWX*SX
A DAM-XXWX*SE DAM-XXWX*SM DAM-XXWX*SZ DAM-XXWX*SB DAM-XXWX*SH DAM-XXWX*SX
B DBM-XXWX*SE DBM-XXWX*SM DBM-XXWX*SZ DBM-XXWX*SB DBM-XXWX*SH DBM-XXWX*SX
C DCM-XXWX*SE DCM-XXWX*SM DCM-XXWX*SZ DCM-XXWX*SB DCM-XXWX*SH DCM-XXWX*SX
D DDM-XXWX*SE DDM-XXWX*SM DDM-XXWX*SZ DDM-XXWX*SB DDM-XXWX*SH DDM-XXWX*SX
* Note: XXWX means inser t combo layout contact arrangement from page 4-56 in catalog number i.e., 13W3.
30µin. Gold Plating
Zinc-Plated Shell with Yellow Chromate Finish and 4-40 Clinch Nuts
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Shell .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Size Diameter Diameter Diameter Diameter Diameter Diameter
E DEME-XXWX*SE DEME-XXWX*SM DEME-XXWX*SZ DEME-XXWX*SB DEME-XXWX*SH DEME-XXWX*SX
A DAME-XXWX*SE DAME-XXWX*SM DAME-XXWX*SZ DAME-XXWX*SB DAME-XXWX*SH DAME-XXWX*SX
B DBME-XXWX*SE DBME-XXWX*SM DBME-XXWX*SZ DBME-XXWX*SB DBME-XXWX*SH DBME-XXWX*SX
C DCME-XXWX*SE DCME-XXWX*SM DCME-XXWX*SZ DCME-XXWX*SB DCME-XXWX*SH DCME-XXWX*SX
D DDME-XXWX*SE DDME-XXWX*SM DDME-XXWX*SZ DDME-XXWX*SB DDME-XXWX*SH DDME-XXWX*SX
Zinc-Plated Shell with Yellow Chromate Finish and Dual Float Bushings
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Shell .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Size Diameter Diameter Diameter Diameter Diameter Diameter
E DEMY-XXWX*SE DEMY-XXWX*SM DEMY-XXWX*SZ DEMY-XXWX*SB DEMY-XXWX*SH DEMY-XXWX*SX
A DAMY-XXWX*SE DAMY-XXWX*SM DAMY-XXWX*SZ DAMY-XXWX*SB DAMY-XXWX*SH DAMY-XXWX*SX
B DBMY-XXWX*SE DBMY-XXWX*SM DBMY-XXWX*SZ DBMY-XXWX*SB DBMY-XXWX*SH DBMY-XXWX*SX
C DCMY-XXWX*SE DCMY-XXWX*SM DCMY-XXWX*SZ DCMY-XXWX*SB DCMY-XXWX*SH DCMY-XXWX*SX
D DDMY-XXWX*SE DDMY-XXWX*SM DDMY-XXWX*SZ DDMY-XXWX*SB DDMY-XXWX*SH DDMY-XXWX*SX
Tin-Plated Shell with Mounting Holes
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Shell .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Size Diameter Diameter Diameter Diameter Diameter Diameter
E DEM-XXWX*SET DEM-XXWX*SMT DEM-XXWX*SZT DEM-XXWX*SBT DEM-XXWX*SHT DEM-XXWX*SXT
A DAM-XXWX*SET DAM-XXWX*SMT DAM-XXWX*SZT DAM-XXWX*SBT DAM-XXWX*SHT DAM-XXWX*SXT
B DBM-XXWX*SET DBM-XXWX*SMT DBM-XXWX*SZT DBM-XXWX*SBT DBM-XXWX*SHT DBM-XXWX*SXT
C DCM-XXWX*SET DCM-XXWX*SMT DCM-XXWX*SZT DCM-XXWX*SBT DCM-XXWX*SHT DCM-XXWX*SXT
D DDM-XXWX*SET DDM-XXWX*SMT DDM-XXWX*SZT DDM-XXWX*SBT DDM-XXWX*SHT DDM-XXWX*SXT
D-subminiature Metal Shell - Combination Layout
Vertical PCB Mount Dip Solder Tails
Series 1 High Reliability
Ordering Information
Combo D-sub Vertical PCB Sockets
4-61
4
Call Toll Free: 1 (800) 323-9612
D-subminiature Metal Shell - Combination Layout
Vertical PCB Mount Dip Solder Tails
Series 1 - High Reliability
50µin. Gold Plating
Cadmium-Plated Shell with Yellow Chromate Finish and Mounting Holes
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Shell .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Size Diameter Diameter Diameter Diameter Diameter Diameter
E DEMM-XXWX*SE DEMM-XXWX*SM DEMM-XXWX*SZ DEMM-XXWX*SB DEMM-XXWX*SH DEMM-XXWX*SX
A DAMM-XXWX*SE DAMM-XXWX*SM DAMM-XXWX*SZ DAMM-XXWX*SB DAMM-XXWX*SH DAMM-XXWX*SX
B DBMM-XXWX*SE DBMM-XXWX*SM DBMM-XXWX*SZ DBMM-XXWX*PB DBMM-XXWX*SH DBMM-XXWX*SX
C DCMM-XXWX*SE DCMM-XXWX*SM DCMM-XXWX*SZ DCMM-XXWX*SB DCMM-XXWX*SH DCMM-XXWX*SX
D DDMM-XXWX*SE DDMM-XXWX*SM DDMM-XXWX*SZ DDMM-XXWX*SB DDMM-XXWX*SH DDMM-XXWX*SX
Cadmium-Plated Shell with Yellow Chromate Finish and 4-40 Clinch Nuts
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Shell .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Size Diameter Diameter Diameter Diameter Diameter Diameter
E DEMME-XXWX*SE DEMME-XXWX*SM DEMME-XXWX*SZ DEMME-XXWX*SB DEMME-XXWX*SH DEMME-XXWX*SX
A DAMME-XXWX*SE DAMME-XXWX*SM DAMME-XXWX*SZ DAMME-XXWX*SB DAMME-XXWX*SH DAMME-XXWX*SX
B DBMME-XXWX*SE DBMME-XXWX*SM DBMME-XXWX*SZ DBMME-XXWX*SB DBMME-XXWX*SH DBMME-XXWX*SX
C DCMME-XXWX*SE DCMME-XXWX*SM DCMME-XXWX*SZ DCMME-XXWX*SB DCMME-XXWX*SH DCMME-XXWX*SX
D DDMME-XXWX*SE DDMME-XXWX*SM DDMME-XXWX*SZ DDMME-XXWX*SB DDMME-XXWX*SH DDMME-XXWX*SX
Cadmium-Plated Shell with Yellow Chromate Finish and Dual Float Bushings
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Shell .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Size Diameter Diameter Diameter Diameter Diameter Diameter
E DEMMY-XXWX*SE DEMMY-XXWX*SM DEMMY-XXWX*SZ DEMMY-XXWX*SB DEMMY-XXWX*SH DEMMY-XXWX*SX
A DAMMY-XXWX*SE DAMMY-XXWX*SM DAMMY-XXWX*SZ DAMMY-XXWX*SB DAMMY-XXWX*SH DAMMY-XXWX*SX
B DBMMY-XXWX*SE DBMMY-XXWX*SM DBMMY-XXWX*SZ DBMMY-XXWX*SB DBMMY-XXWX*SH DBMMY-XXWX*SX
C DCMMY-XXWX*SE DCMMY-XXWX*SM DCMMY-XXWX*SZ DCMMY-XXWX*SB DCMMY-XXWX*SH DCMMY-XXWX*SX
D DDMMY-XXWX*SE DDMMY-XXWX*SM DDMMY-XXWX*SZ DDMMY-XXWX*SB DDMMY-XXWX*SH DDMMY-XXWX*SX
Ordering Information
Tin-Plated Shell and Dual Float Bushings
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Shell .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Size Diameter Diameter Diameter Diameter Diameter Diameter
E DEMY-XXWX*SET DEMY-XXWX*SMT DEMY-XXWX*SZT DEMY-XXWX*SBT DEMY-XXWX*SHT DEMY-XXWX*SXT
A DAMY-XXWX*SET DAMY-XXWX*SMT DAMY-XXWX*SZT DAMY-XXWX*SBT DAMY-XXWX*SHT DAMY-XXWX*SXT
B DBMY-XXWX*SET DBMY-XXWX*SMT DBMY-XXWX*SZT DBMY-XXWX*SBT DBMY-XXWX*SHT DBMY-XXWX*SXT
C DCMY-XXWX*SET DCMY-XXWX*SMT DCMY-XXWX*SZT DCMY-XXWX*SBT DCMY-XXWX*SHT DCMY-XXWX*SXT
D DDMY-XXWX*SET DDMY-XXWX*SMT DDMY-XXWX*SZT DDMY-XXWX*SBT DDMY-XXWX*SHT DDMY-XXWX*SXT
30µin. Gold Plating (Cont’d)
Tin-Plated Shell with 4-40 Clinch Nuts
.125 T ail Length .158 T ail Length .185 T ail Length .125 T ail Length .158 T ail Length .185 T ail Length
Shell .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact
Size Diameter Diameter Diameter Diameter Diameter Diameter
E DEME-XXWX*SET DEME-XXWX*SMT DEME-XXWX*SZT DEME-XXWX*SBT DEME-XXWX*SHT DEME-XXWX*SXT
A DAME-XXWX*SET DAME-XXWX*SMT DAME-XXWX*SZT DAME-XXWX*SBT DAME-XXWX*SHT DAME-XXWX*SXT
B DBME-XXWX*SET DBME-XXWX*SMT DBME-XXWX*SZT DBME-XXWX*SBT DBME-XXWX*SHT DBME-XXWX*SXT
C DCME-XXWX*SET DCME-XXWX*SMT DCME-XXWX*SZT DCME-XXWX*SBT DCME-XXWX*SHT DCME-XXWX*SXT
D DDME-XXWX*SET DDME-XXWX*SMT DDME-XXWX*SZT DDME-XXWX*SBT DDME-XXWX*SHT DDME-XXWX*SXT
Combo D-sub Vertical PCB Sockets (Cont’d)
*Note: XXWX means inser t combo layout contact arrangement from page 4-56 in catalog number i.e., 13W3.
4-62
Call Toll Free: 1 (800) 323-9612
T ermination T ooling
•No tools are required for coaxial contact insertion. Contacts snap into connector. Coaxial and high-voltage contact
extraction tool #CET-C6B for removing contacts after ter mination. See page 4-103.
• Tool to crimp sleeve over cable braid: Use 3-cavity die #CCD-26 with crimp frame #FCT-552. See page 4-103.
NOTE: In order to determine which contact to use with a cable wire not specifically listed:
•Check the style of contact required: straight or right-angle, solder braid or crimp braid, etc.
• Refer to the cable wire manufacturer’s specifications to deter mine:
- The O.D. of the insulator.
- The O.D. of the jacket.
• Compare the above with the corresponding dimensions C and E in the straight contacts and dimensions B and
C in the right-angle contacts.
D-subminiature Contacts
Coaxial - High Power - High Voltage
FEATURES
■■
Available in Coaxial (50ΩΩand 75ΩΩ), High-Voltage, and High-Power styles.
■■
Cable termination and PCB mount contacts are available in right-angle and straight plugs
and receptacles.
■■
Precision screw machine construction results in uniform contact impedance and excellent
contact retention.
■■
Available with 30µin. or 50µin. gold contact plating.
■■
Cable braid can be soldered or crimped.
■■
See pages 4-55 thru 4-61 for Cinch combination layout D-subminiature connectors.
4-63 Call Toll Free: 1 (800) 323-9612
Materials
• Receptacle: Body - Ber yllium copper, Insulator - Teflon, Contacts - Brass.
• Plug: Body - Brass, Insulator - Teflon, Contacts - Ber yllium copper.
• Plating: 30µin. gold over nickel, 50µin. gold over copper.
Electrical Characteristics
Dielectric Withstanding Voltage:
• Cable Contacts: minimum AC 1000V RMS @ sea level.
• PCB Contacts: minimum AC 800V RMS @ sea level.
Frequency Range: 0-900 MHz.
D-subminiature Contacts
Coaxial - 50ΩΩ
Right-Angle and Straight
Right-Angle
Plug
Right-Angle PCB Coaxial Contacts - 50ΩΩ
30µin. Gold 50µin. Gold
Plug DM53761-30 DM53761-50
Recept. DM53763-30 DM53763-50
Straight PCB Coaxial Contacts - 50ΩΩ
30µin. Gold 50µin. Gold
Plug DM53760-30 DM53760-50
Recept. DM53762-30 DM53762-50
Ordering Information
Receptacle
Receptacle
Plug
Straight
4-64
4
Call Toll Free: 1 (800) 323-9612
Straight Crimp Braid Coaxial Contacts
A Max. B Ref. C D E +.005" RG Cable
30µin. Gold 50µin. Gold in mm in mm in mm in mm in mm Old New
Plug DM53740 DM53740-17 .739 18.77 .929 23.60 .093 2.36 .124 3.15 .040 1.02 196/U 178B/U
Plug DM53740-1 DM53740-15 .739 18.77 .929 23.60 .125 3.18 .152 3.86 .067 1.70 187/U 179B/U
Plug DM53740-3 DM53740-16 .847 21.51 1.037 26.34 .202 5.13 .235 5.97 .110 2.79 195/U 180B/U
Plug DM53740-5 DM53740-18 .847 21.51 1.037 26.34 .202 5.13 .235 5.97 .125 3.18 58/U 58B/U
Recept. DM53742 DM53742-18 .739 18.77 .929 23.60 .093 2.36 .124 3.15 .040 1.02 196/U 178B/U
Recept. DM53742-1 DM53742-16 .739 18.77 .929 23.60 .125 3.18 .152 3.86 .067 1.70 187/U, 179B/U,
188/U 316/BU
Recept. DM53742-3 DM53742-17 .847 21.51 1.037 26.34 .202 5.13 .235 5.97 .110 2.79 195/U 180B/U
Recept. DM53742-5 DM53742-19 .847 21.51 1.037 26.34 .202 5.13 .235 5.97 .125 3.18 58/U 58B/U
D-subminiature Contacts
Coaxial - 50ΩΩ
Straight
Ordering Information
Straight Solder Braid Coaxial Contacts
A Max. B Ref. C D E +.005" RG Cable
30µin. Gold 50µin. Gold in mm in mm in mm in mm in mm Old New
Plug DM53740-5008 DM53740-5105 .739 18.77 0.929 23.60 .093 2.36 .124 3.15 .040 1.02 196/U 178B/U
Plug DM53740-5001 DM53740-5099 .739 18.77 0.929 23.60 .125 3.18 .152 3.86 .067 1.70 187/U 179B/U
Plug DM53740-5002 DM53740-5104 .847 21.51 1.037 26.34 .202 5.13 .235 5.97 .110 2.79 195/U 180B/U
Plug DM53740-5005 DM53740-5101 .847 21.51 1.037 26.34 .202 5.13 .235 5.97 .125 3.18 58/U 58B/U
Recept. DM53742-5006 DM53742-5092 .739 18.77 0.929 23.60 .093 2.36 .124 3.15 .040 1.02 196/U 178B/U
Recept. DM53742-5001 DM53742-5089 .739 18.77 0.929 23.60 .125 3.18 .152 3.86 .067 1.70 187/U 179B/U
Recept. DM53742-5002 DM53742-5091 .847 21.51 1.037 26.34 .202 5.13 .235 5.97 .110 2.79 195/U 180B/U
Recept. DM53742-5004 DM53742-5086 .847 21.51 1.037 26.34 .202 5.13 .235 5.97 .125 3.18 58/U 58B/U
Plug DM53740-5000 DM53740-5100 .670 17.02 0.860 21.84 .093 2.36 .124 3.15 .040 1.02 196/U 178B/U
Recept. DM53742-5000 DM53742-5085 .670 17.02 0.860 21.84 .093 2.36 .124 3.15 .040 1.02 196/U 178B/U
Plug Receptacle
• Material and electrical specifications: See page 4-63.
4-65
4
Call Toll Free: 1 (800) 323-9612
D-subminiature Contacts
Coaxial - 50ΩΩ
Right Angle
Right-Angle Solder Braid Coaxial Contacts - 50ΩΩ
A B C D E F RG Cable
30µin. Gold 50µin. Gold in mm in mm in mm in mm in mm in mm Old New
Plugs
DM53741-5000 DM53741-5059 .530 13.46 .734 18.64 .492 12.50 .040 1.02 .093 2.36 .125 3.18 RG 196/U RG 178B/U
DM53741-5001 DM53741-5062 .530 13.46 .734 18.64 .492 12.50 .067 1.70 .125 3.18 .152 3.86 RG 187/U RG 179B/U,
RG 316B/U
DM53741-5003 DM53741-5063 .530 13.46 .734 18.64 .601 15.27 .110 2.79 .202 5.13 .235 5.97 RG 195/U RG 180B/U
DM53741-5004 DM53741-5060 .530 13.46 .734 18.64 .601 15.27 .125 3.18 .202 5.13 .235 5.97 RG 196/U RG 58B/U
Receptacles
DM53743-5000 DM53743-5073 .530 13.46 .734 18.64 .492 12.50 .040 1.02 .093 2.36 .125 3.18 RG 196/U RG 178B/U
DM53743-5001 DM53743-5076 .530 13.46 .734 18.64 .492 12.50 .067 1.70 .125 3.18 .152 3.86 RG 187/U RG 179B/U,
RG 316B/U
DM53743-5003 DM53743-5077 .530 13.46 .734 18.64 .601 15.27 .110 2.79 .202 5.13 .235 5.97 RG 195/U RG 180B/U
DM53743-5004 DM53743-5074 .530 13.46 .734 18.64 .601 15.27 .125 3.18 .202 5.13 .235 5.97 RG 58/U RG 58B/U
Plug Receptacle
Right-Angle Crimp Braid Coaxial Contacts - 50ΩΩ
A B C D E F RG Cable
30µin. Gold 50µin. Gold in mm in mm in mm in mm in mm in mm Old New
Plugs
DM53741-0 DM53741-12 .530 13.46 .734 18.64 .492 12.50 .040 1.02 .093 2.36 .125 3.18 RG 196/U RG 178B/U
DM53741-1 DM53741-11 .530 13.46 .734 18.64 .492 12.50 .067 1.70 .125 3.18 .152 3.86 RG 187/U RG 179B/U,
RG 188/U RG 316B/U
DM53741-3 DM53741-10 .530 13.46 .734 18.64 .601 15.27 .110 2.79 .202 5.13 .235 5.97 RG 195/U RG 180B/U
DM53741-4 DM53741-13 .530 13.46 .734 18.64 .601 15.27 .125 3.18 .202 5.13 .235 5.97 RG 58/U RG 58B/U
Receptacles
DM53743-2 DM53743-18 .530 13.46 .734 18.64 .492 12.50 .040 1.02 .093 2.36 .125 3.18 RG 196/U RG 178B/U
DM53743-3 DM53743-16 .530 13.46 .734 18.64 .492 12.50 .067 1.70 .125 3.18 .152 3.86 RG 187/U RG 179B/U,
RG 188/U RG 316B/U
DM53743-5 DM53743-17 .530 13.46 .734 18.64 .601 15.27 .110 2.79 .202 5.13 .235 5.97 RG 195/U RG 180B/U
DM53743-6 DM53743-19 .530 13.46 .734 18.64 .601 15.27 .125 3.18 .202 5.13 .235 5.97 RG 58/U RG 58B/U
• Mater ial and electrical specifications: See page 4-63.
4
D-subminiature Contacts
Coaxial - 75ΩΩ
Straight
Materials
•Receptacle: Body - Brass or ber yllium copper, Insulator - Teflon, Contacts - Brass.
•Plug: Body - Brass, Insulator - Teflon, Contacts - Ber yllium copper.
•Plating: 30µin. gold over nickel, 50µin. gold over copper
Electrical Characteristics
Nominal Impedance: 75Ω.
Dielectric Withstanding Voltage: Minimum 1000V RMS @ sea level.
VWSR: 1.05 max. for 0-1 GHz and 1.25 max for 1-2 GHz
Ordering Information
75ΩΩCrimp/Solder Termination Straight Coaxial Contacts
AB
30µin. Gold 50µin. Gold in mm in mm Material Cable
Plug DM53750-12 DM53750-52 1.037 26.34 .108 2.74 Brass Belden 8218
Plug DM53750-11 DM53750-51 0.929 23.60 .067 1.70 Brass RG 179 B/U
Recept. DM53752-8 DM53752-58 1.037 26.34 .108 2.74 Brass Belden 8218
Recept. DM53752-7 DM53752-57 0.929 23.60 .067 1.70 Brass RG 179 B/U
Recept. DM53752-6 DM53752-56 1.037 26.34 .108 2.74 Ber yllium Copper Belden 8218
Recept. DM53752-5 DM53752-55 0.929 23.60 .067 1.70 Ber yllium Copper RG 179 B/U
75ΩΩCrimp/Crimp Termination Straight Coaxial Contacts
AB
30µin. Gold 50µin. Gold in mm in mm Material Cable
Plug DM53750-010 DM53750-510 1.050 26.67 .108 2.74 Brass Belden 8218
Plug DM53750-009 DM53750-509 1.050 26.67 .067 1.70 Brass RG 179 B/U
Recept. DM53752-004 DM53752-504 1.090 27.69 .108 2.74 Brass Belden 8218
Recept. DM53752-003 DM53752-503 1.090 27.69 .067 1.70 Brass RG 179 B/U
Recept. DM53752-002 DM53752-502 1.090 27.69 .108 2.74 Ber yllium Copper Belden 8218
Recept. DM53752-001 DM53752-501 1.090 27.69 .067 1.70 Ber yllium Copper RG 179 B/U
150/.153 Dia.
.187 Dia. Ref.
.201 Dia. Ref.
.187 Dia. Ref.
.201 Dia. Ref.
Plug Receptacle
4-66
Call Toll Free: 1 (800) 323-9612
4-67
4
Call Toll Free: 1 (800) 323-9612
Materials
• Contact: Body - Nylon per MIL-P-20693
• Plating: 30µin. gold over nickel, 50µin. gold over copper
Electrical Characteristics
Dielectric Withstanding Voltage: Minimum AC 2800VAC RMS to shell @ sea level
High-Voltage Contacts - For #20 AWG wire
D-subminiature Contacts
High Voltage
Right-Angle and Straight
Straight High-Voltage Contacts - #20 AWG Wire
A B Wire
30µin. Gold 50µin. Gold in mm in mm Size
Plug DM51157-0 DM51157-8 .539 13.69 .734 18.64 #20
Recept. DM51155-0 DM51155-7 .539 13.69 .734 18.64 #20
A B Wire
30µin. Gold 50µin. Gold in mm in mm Size
Plug DM51157-5000 DM51157-5005 .491 12.47 .697 17.70 #20
Recept. DM51155-5000 DM51155-5004 .491 12.47 .697 17.70 #20
Straight
Receptacle Receptacle
Right-Angle High-Voltage Contacts - #20 AWG Wire
Ordering Information
Plug
Right-Angle
Plug
4-68
4
Call Toll Free: 1 (800) 323-9612
D-subminiature Contacts
High-Power
Straight
• High-Power Contacts will accommodate up to 40 Amps current rating.
Materials
• Contact Plating:
- 30µin. gold over nickel
- 50µin. gold over copper
• Receptacle: Ber yllium copper
• Plug: Brass
Straight High-Power Contacts
Current Wire
A B C Rating Size
30µin. Gold 50µin. Gold in mm in mm in mm (Amps) (AWG)
Plug DM53745-1 DM53745-28 .666 16.92 .866 22.00 .188 4.78 40 #8
Plug DM53745-7 DM53745-27 .666 16.92 .866 22.00 .112 2.84 20 #12
Plug DM53745-8 DM53745-25 .666 16.92 .866 22.00 .069 1.75 10 #16
Recept. DM53744-1 DM53744-21 .666 16.92 .866 22.00 .188 4.78 40 #8
Recept. DM53744-6 DM53744-25 .666 16.92 .866 22.00 .112 2.84 20 #12
Recept. DM53744-7 DM53744-24 .666 16.92 .866 22.00 .069 1.75 10 #16
Ordering Information
Plug
Receptacle
4-70
Call Toll Free: 1 (800) 323-9612
FEATURES
■
High-reliability in a commercial grade connector.
■
Monoblock diallyl phthalate insulator for improved electrical performance .
■
Offered in 9, 15, 25, 37, and 50 position plugs and sockets.
■
Offered with .120 mounting holes, 4-40 clinch nuts, or dual float bushings.
■
Commercial version of M24308 Military connectors with tin-plated or zinc-plated shell and
30µin. gold contact plating.
■
Screw Machine Crimp and Poke contacts available as follows:
• Note that all contacts are packed loose.
• Plating options: 30µin. gold.
• Can be included with the connector or purchased separately (FO part numbers).
■
See pages 4-5 thru 4-10 for standard dimensions, contact arrang ements, and panel
mounting specifications.
MATERIALS
Insulator Material: Glass fiber-filled diallyl phthalate
(green), UL 94V-0
Connector Shell: Steel with zinc plating and yellow chromate finish
Contact Material: Plug - Brass (machined), Socket - Phosphor
bronze (machined)
Contact Plating: 30µin.gold ov er nic k el
4-40 Clinch Nut: Steel with cadmium plating and yellow
chromate finish
Dual Float Bushing: Stainless steel, passivated
ENVIRONMENTAL
Operating T emperature: -65°C to + 125°C
Shock: 50G peak per MIL-STD-202, Method 213,
Condition G
Vibration: 12 cycles in three per pendicular directions @
10-2000Hz, per MIL-STD-202, Method 204, Condition D
Moisture Resistance: 90-95% relative humidity @ 40°C for 96
hours per MIL-STD-202, Method 103
ELECTRICAL
Withstanding Voltage: Minimum 1250V RMS @ sea level
Current Rating: 5 Amps
Contact Resistance: 2.7 milliohms maximum
Insulation Resistance: 5000 megohms maximum (initial);
1000 megohms (minimum) after
environmental testing
MECHANICAL
Individual Contact Insertion and
Separation Force (minimum/maximum): 0.7 oz./12 oz.
Durability: 500 mating cycles
D-subminiature Metal Shell
Crimp and Poke
Series 3 - High Reliability
4-71 Call Toll Free: 1 (800) 323-9612
T ermination T ooling
• Contact Insertion/Extraction Tool: #CIET-20-HD (Militar y #M81969/39-01). See page 4-103.
• Cr imp Contact Hand Tool: Militar y #M22520/2-01. See page 4-103. Contact Positioner
(below) required.
• Positioner for machine contacts for Hand Tool #M22520/2-01 (locates contact in the correct
position): #M22520/2-08. See page 4-103.
D-subminiature Metal Shell
Crimp and Poke
Series 3 - High Reliability
.375 (9.53) max.
Zinc-Plated Shell with Yellow Chromate Finish
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
30µin. Gold Without 30µin. Gold Without 30µin. Gold Without
Positions Contacts Contacts Contacts Contacts Contacts Contacts
9 DEMA-9P DEMA-9P-FO DEMAE-9P DEMAE-9P-FO DEMAY-9P DEMAY-9P-FO
15 DAMA-15P DAMA-15P-FO DAMAE-15P DAMAE-15P-FO DAMAY-15P DAMAY-15P-FO
25 DBMA-25P DBMA-25P-FO DBMAE-25P DBMAE-25P-FO DBMAY-25P DBMAY-25P-FO
37 DCMA-37P DCMA-37P-FO DCMAE-37P DCMAE-37P-FO DCMAY-37P DCMAY-37P-FO
50 DDMA-50P DDMA-50P-FO DDMAE-50P DDMAE-50P-FO DDMAY-50P DDMAY-50P-FO
Ordering Information
Crimp and Poke - Plugs
Tin-Plated Shells with Grounding Indents
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
30µin. Gold Without 30µin. Gold Without 30µin. Gold Without
Positions Contacts Contacts Contacts Contacts Contacts Contacts
9 DEMA-9PTI DEMA-9PTI-FO DEMAE-9PTI DEMAE-9PTI-FO DEMAY-9PTI DEMAY-9PTI-FO
15 DAMA-15PTI DAMA-15PTI-FO DAMAE-15PTI DAMAE-15PTI-FO DAMAY-15PTI DAMAY-15PTI-FO
25 DBMA-25PTI DBMA-25PTI-FO DBMAE-25PTI DBMAE-25PTI-FO DBMAY-25PTI DBMAY-25PTI-FO
37 DCMA-37PTI DCMA-37PTI-FO DCMAE-37PTI DCMAE-37PTI-FO DCMAY-37PTI DCMAY-37PTI-FO
50 DDMA-50PTI DDMA-50PTI-FO DDMAE-50PTI DDMAE-50PTI-FO DDMAY-50PTI DDMAY-50PTI-FO
4-72
4
Call Toll Free: 1 (800) 323-9612
Zinc-Plated Shell with Yellow Chromate Finish
Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
30µin. Gold Without 30µin. Gold Without 30µin. Gold Without
Positions Contacts Contacts Contacts Contacts Contacts Contacts
9 DEMA-9S DEMA-9S-FO DEMAE-9S DEMAE-9S-FO DEMAY-9S DEMAY-9S-FO
15 DAMA-15S DAMA-15S-FO DAMAE-15S DAMAE-15S-FO DAMAY-15S DAMAY-15S-FO
25 DBMA-25S DBMA-25S-FO DBMAE-25S DBMAE-25S-FO DBMAY-25S DBMAY-25S-FO
37 DCMA-37S DCMA-37S-FO DCMAE-37S DCMAE-37S-FO DCMAY-37S DCMAY-37S-FO
50 DDMA-50S DDMA-50S-FO DDMAE-50S DDMAE-50S-FO DDMAY-50S DDMAY-50S-FO
Tin-Plated Shell Mounting Holes 4-40 Clinch Nuts Dual Float Bushings
30µin. Gold Without 30µin. Gold Without 30µin. Gold Without
Positions Contacts Contacts Contacts Contacts Contacts Contacts
9 DEMA-9ST DEMA-9ST-FO DEMAE-9ST DEMAE-9ST-FO DEMAY-9ST DEMAY-9ST-FO
15 DAMA-15ST DAMA-15ST-FO DAMAE-15ST DAMAE-15ST-FO DAMAY-15ST DAMAY-15ST-FO
25 DBMA-25ST DBMA-25ST-FO DBMAE-25ST DBMAE-25ST-FO DBMAY-25ST DBMAY-25ST-FO
37 DCMA-37ST DCMA-37ST-FO DCMAE-37ST DCMAE-37ST-FO DCMAY-37ST DCMAY-37ST-FO
50 DDMA-50ST DDMA-50ST-FO DDMAE-50ST DDMAE-50ST-FO DDMAY-50ST DDMAY-50ST-FO
Crimp and Poke - Sockets
Ordering Information
Contacts
Description
Pin M39029/64-369
Socket M39029/63-368
D-subminiature Metal Shell
Crimp and Poke
Series 3 - High Reliability
Ordering Information
Crimp and Poke Machined Contacts
• Will accommodate 20, 22, and 24 AWG wire.
4-74
Call Toll Free: 1 (800) 323-9612
FEATURES
■■
Meets all MIL-C-24308 Class G specifications.
■■
Offered in Crimp and Poke and Solder Cup and PCB vertical and right-angle .
■■
Offered in 9, 15, 25, 37, and 50 position plugs and sockets except right-angle (9 to 37 positions).
■■
Monoblock green diallyl phthalate insulator for improved electrical performance .
■■
See pages 4-5 thru 4-10 for standard dimensions, contact arrang ements, and panel
mounting specifications.
MATERIALS
Insulator Material: Glass-filled diallyl phthalate (green)
per MIL-M-14, Type SDG-F
Connector Shell: Steel with cadmium plating and yellow
chromate finish
Contact Material: Plug - Brass (machined), Socket - Phosphor
bronze (machined)
Contact Plating: 50µin. gold over copper or nickel
Dual Float Bushing: Stainless steel, passivated or
non-magnetic brass
ENVIRONMENTAL
Operating T emperature: -65°C to + 125°C
Shock: 50G peak per MIL-STD-202, Method 213, Condition G
Vibration: 12 cycles in three per pendicular directions @
10-2000Hz, per MIL-STD-202 Method 204,
Condition D
Moisture Resistance: 90-95% relative humidity @ 40°C for 96
hours per MIL-STD-202, Method 103
ELECTRICAL
Withstanding Voltage: Minimum 1250V RMS @ sea level
Current Rating: 5 Amps
Contact Resistance: 2.7 milliohms maximum
Insulation Resistance: 5000 megohms maximum (initial);
1000 megohms (minimum) after
environmental testing
MECHANICAL
Individual Contact Insertion and
Separation Force (minimum/maximum): 0.7 oz./12 oz.
Durability: 500 mating cycles
D-subminiature Metal Shell
MIL-C-24308
M24308 Series
4-75 Call Toll Free: 1 (800) 323-9612
D-subminiature Metal Shell
MIL-C-24308 Crimp and Poke
M24308 Series
• Available with .120 mounting holes, float bushings, or dual float bushings.
• Order with contacts included or separately.
• Order with contact Insertion/Extraction Tool included or order tool #CIET-20-HD separately. See page 4-103.
Contacts Not Included. Inser tion/Extraction Tool Not Included.
Positions Mounting Holes Float Bushings Dual Float Bushings
9 M24308/4-259F M24308/4-324F M24308/4-457F
15 M24308/4-260F M24308/4-325F M24308/4-458F
25 M24308/4-261F M24308/4-326F M24308/4-459F
37 M24308/4-262F M24308/4-327F M24308/4-460F
50 M24308/4-263F M24308/4-328F M24308/4-461F
Steel Shell
Contacts Included. Inser tion/Extraction Tool Not Included.
Positions Mounting Holes Float Bushings Dual Float Bushings
9 M24308/4-1F M24308/4-302F M24308/4-435F
15 M24308/4-2F M24308/4-303F M24308/4-436F
25 M24308/4-3F M24308/4-304F M24308/4-437F
37 M24308/4-4F M24308/4-305F M24308/4-438F
50 M24308/4-5F M24308/4-306F M24308/4-439F
Contacts Included. Inser tion/Extraction Tool Included.
Positions Mounting Holes Float Bushings Dual Float Bushings
9 M24308/4-6F M24308/4-313F M24308/4-446F
15 M24308/4-7F M24308/4-314F M24308/4-447F
25 M24308/4-8F M24308/4-315F M24308/4-448F
37 M24308/4-9F M24308/4-316F M24308/4-449F
50 M24308/4-10F M24308/4-317F M24308/4-450F
Crimp and Poke Plugs
Ordering Information
4
D-subminiature Metal Shell
MIL-C-24308 Crimp and Poke
M24308 Series
Ordering Information
Crimp and Poke Sockets
Contacts Included. Inser tion/Extraction Tool Included.
Positions Mounting Holes Float Bushings Dual Float Bushings
9 M24308/2-6F M24308/2-34F M24308/2-353F
15 M24308/2-7F M24308/2-35F M24308/2-354F
25 M24308/2-8F M24308/2-36F M24308/2-355F
37 M24308/2-9F M24308/2-37F M24308/2-356F
50 M24308/2-10F M24308/2-38F M24308/2-357F
Contacts Included. Inser tion/Extraction Tool Not Included.
Positions Mounting Holes Float Bushings Dual Float Bushings
9 M24308/2-1F M24308/2-23F M24308/2-342F
15 M24308/2-2F M24308/2-24F M24308/2-343F
25 M24308/2-3F M24308/2-25F M24308/2-344F
37 M24308/2-4F M24308/2-26F M24308/2-345F
50 M24308/2-5F M24308/2-27F M24308/2-346F
Contacts Not Included. Inser tion/Extraction Tool Not Included.
Positions Mounting Holes Float Bushings Dual Float Bushings
9 M24308/2-281F M24308/2-292F M24308/2-482F
15 M24308/2-282F M24308/2-293F M24308/2-483F
25 M24308/2-283F M24308/2-294F M24308/2-484F
37 M24308/2-284F M24308/2-295F M24308/2-485F
50 M24308/2-285F M24308/2-296F M24308/2-486F
Steel Shell
4-76
Call Toll Free: 1 (800) 323-9612
4-77
4
Call Toll Free: 1 (800) 323-9612
D-subminiature Metal Shell
MIL-C-24308 Crimp and Poke
M24308 Series
Ordering Information
Tooling
• Contact Inser tion/Extraction Tool: #CIET-20-HD (Militar y #M81969/39-01). See page 4-103.
• Wire ter mination hand tool: #M22520/2-01. See page 4-103.
• Positioner for machine contacts for hand tool #M22520/2-08 (locates contact in the correct position). See page 4-103.
Description
Pin M39029/64-369
Socket M39029/63-368
Crimp and Poke Contacts
Ordering Information
• Will accommodate 20, 22, and 24 AWG wire.
4-78
4
Call Toll Free: 1 (800) 323-9612
• Available with .120" mounting holes, float bushings, or dual float bushings.
• Will accommodate up to 20 AWG wire.
D-subminiature Metal Shell
MIL-C-24308 Solder Cup
M24308 Series
Steel Shell
Positions Mounting Holes Float Bushings Dual Float Bushings
9 M24308/3-1F M24308/3-12F M24308/3-17F
15 M24308/3-2F M24308/3-13F M24308/3-18F
25 M24308/3-3F M24308/3-14F M24308/3-19F
37 M24308/3-4F M24308/3-15F M24308/3-20F
50 M24308/3-5F M24308/3-16F M24308/3-21F
Brass Non-Magnetic Shell
Positions Mounting Holes Float Bushings Dual Float Bushings
9 M24308/7-1F M24308/7-12F M24308/7-17F
15 M24308/7-2F M24308/7-13F M24308/7-18F
25 M24308/7-3F M24308/7-14F M24308/7-19F
37 M24308/7-4F M24308/7-15F M24308/7-20F
50 M24308/7-5F M24308/7-16F M24308/7-21F
Steel Shell
Positions Mounting Holes Float Bushings Dual Float Bushings
9 M24308/1-1F M24308/1-12F M24308/1-23F
15 M24308/1-2F M24308/1-13F M24308/1-24F
25 M24308/1-3F M24308/1-14F M24308/1-25F
37 M24308/1-4F M24308/1-15F M24308/1-26F
50 M24308/1-5F M24308/1-16F M24308/1-27F
Brass Non-Magnetic Shell
Positions Mounting Holes Float Bushings Dual Float Bushings
9 M24308/5-1F M24308/5-12F M24308/5-23F
15 M24308/5-2F M24308/5-13F M24308/5-24F
25 M24308/5-3F M24308/5-14F M24308/5-25F
37 M24308/5-4F M24308/5-15F M24308/5-26F
50 M24308/5-5F M24308/5-16F M24308/5-27F
Ordering Information
Solder Cup Plugs
Solder Cup Sockets
4-79
4
Call Toll Free: 1 (800) 323-9612
D-subminiature Metal Shell
MIL-C-24308 PCB
M24308 Series
Right-Angle Connector
•.283" footpr int requires minimal PCB space.
• Available with three contact tail lengths (.127", .158", and .183") with .030"
contact diameter.
• Available with two contact tail lengths (.127" and .183") with .040"
contact diameter.
• Offered with .120" mounting holes.
• Mounting bracket: Black nylon. Can be removed if necessar y.
0.396
0.340
0.283
Right-Angle PCB Plugs (Sockets not available)
Steel Shell .127 T ail Length .158 T ail Length .183 T ail Length .127 T ail Length .183 T ail Length
Positions .030 Contact Diameter .030 Contact Diameter .030 Contact Diameter .040 Contact Diameter .040 Contact Diameter
9 M24308/24-25F M24308/24-31F M24308/24-49F M24308/24-37F M24308/24-55F
15 M24308/24-26F M24308/24-32F M24308/24-50F M24308/24-38F M24308/24-56F
25 M24308/24-27F M24308/24-33F M24308/24-51F M24308/24-39F M24308/24-57F
37 M24308/24-28F M24308/24-34F M24308/24-52F M24308/24-40F M24308/24-58F
Steel Shell .158 T ail Length .183 T ail Length .158 T ail Length .183 T ail Length
Positions .030 Contact Diameter .030 Contact Diameter .040 Contact Diameter .040 Contact Diameter
9 M24308/23-1F M24308/23-7F M24308/23-13F M24308/23-19F
15 M24308/23-2F M24308/23-8F M24308/23-14F M24308/23-20F
25 M24308/23-3F M24308/23-9F M24308/23-15F M24308/23-21F
37 M24308/23-4F M24308/23-10F M24308/23-16F M24308/23-22F
50 M24308/23-5F M24308/23-11F M24308/23-17F M24308/23-23F
Steel Shell .158 T ail Length .183 T ail Length .158 T ail Length .183 T ail Length
Positions .030 Contact Diameter .030 Contact Diameter .040 Contact Diameter .040 Contact Diameter
9 M24308/24-1F M24308/24-7F M24308/24-13F M24308/24-19F
15 M24308/24-2F M24308/24-8F M24308/24-14F M24308/24-20F
25 M24308/24-3F M24308/24-9F M24308/24-15F M24308/24-21F
37 M24308/24-4F M24308/24-10F M24308/24-16F M24308/24-22F
50 M24308/24-5F M24308/24-11F M24308/24-17F M24308/24-23F
Ordering Information
Right-Angle
Vertical
Vertical PCB Plugs
Vertical PCB Sockets
Vertical Connector
• Available with two contact tail lengths (.158" and .183") and two contact
diameters (.030" and .040").
• Offered with .120" mounting holes.
Ordering Information
See Char t
0.122 (2.84)
4-80
Call Toll Free: 1 (800) 323-9612
FEATURES
Cinch backshells are offered in a variety of styles, each having a specific strength.
• Backshells have two-piece construction and are frequently used where appearance is a major factor.
RFI/EMI shielding capability is also an option:
- Plastic Backshells: No shielding.
- Metallized Plastic: Economical method of shielding.
- Diecast Backshells: Maximum shielding.
• Cinch SDH Series backshells utilize Cinch’s Latch-N-Lock™ system with quick release
disconnect. Just squeeze the latch levers to release the connector. Also available with standard
4-40 mounting hardware.
• Junction Shells come in a variety of sizes and shapes including right-angle and low profile.
They are generally of one-piece constr uction with an adjustable clamp, but there is no shielding.
• Hoods have an improved appearance versus junction shells but no shielding. They are all-plastic
and come in right-angle or straight configurations.
• Hardware, in the for m of adjustable grommets or strain relief clamps and 4-40 screws, is generally
supplied with the product; however, a variety of optional hardware is also available in the accessories
section of this catalog.
D-subminiature
Backshells/Junction Shells/Hoods
Accessories
4-81 Call Toll Free: 1 (800) 323-9612
Backshells
Type 2-Piece 2-Piece 2-Piece 2-Piece Super-D Connection System
Material Plastic Metallized Diecast Diecast Black Plastic Gray Plastic
Series DPH DCH DMH Ether net SDH - B SDH - G
Shell Sizes* E A B C E A B C D E A B C D A E A B C E A B C
Cable Exit 180° 180° 180° 90°/180° 90°/180° 90°/180°
Fits Connector Series marked with “•”:
D*A Series •••••
HTD Series •••
D*U Series •••••
Series 3 •••••
T Series Metal Shell •••••
T Series All-Plastic •
Basic D •••••
Series 1 •••••
Junction Shells/Hoods Junction Shells Hoods
Straight Round Rt. Angle Deep Straight Switching
Type Clamp Clamp Clamp Clamp Shell Phenolic Straight Rt. Angle
Material Metal Metal Metal Metal Metal Plastic Plastic Plastic
Shell Sizes* A B C D A B C D E A B C D E A B C D A B C D A B E A B A B
Cable Exit 180° 180° 90° 180° 180° 180° 180° 90°
Fits Connector Series marked with “•”:
D*A Series ••••••••
D*U Series ••••••••
Series 3 ••••••••
T Series Metal Shell ••••••••
T Series All-Plastic
Basic D Series ••••••••
Series 1 ••••••••
D-subminiature
Backshells/Junction Shells/Hoods
Accessories
*Conversion Char t between Standard Density Connectors and HPD/HTD Ser ies 1.5 Density Connectors
Standard 1.5 D-Sub
Shell Size D-sub HTD
E9 15
A15 26
B25 44
C37 62
D 50 N/A
The following is a summar y of the various backshells, junction shells, and hoods that Cinch offers:
4-82
4
Call Toll Free: 1 (800) 323-9612
• Standard two-piece construction available in plastic, metallized plastic, or diecast zinc versions with 180° straight cable entry.
• Fits standard metal shell D-subminiature plugs and sockets as well as HTD Ser ies 1.5 D-subs.
• Ether net hoods are available in diecast 15 position versions only with both 90° and 180° cable entr y.
• Included in all backshells:
- Hardware: 4-40 screws, hex nuts, 4-40 screw mounting bracket.
- Grommets: To accommodate most cable sizes. Grommets also function as strain reliefs.
• Backshells are individually bagged.
• Note that slide locks may not be used with these backshells.
• Optional thumbscrew for backshell must be ordered separately if required.
Materials
• 4-40 screws, hex nuts, mounting bracket: Steel with zinc plating and clear chromate coating.
• Standard Backshells:
- Plastic Backshells: ABS (black), hardware - steel with zinc plating, grommets - polyphenylene, (black).
- Metallized Plastic Backshells: ABS with nickel over copper plating, hardware - steel with zinc plating,
grommets - PVC (black).
- Diecast Backshells: Diecast zinc, grommets - PVC (black).
• Ether net Backshells: Diecast zinc, grommets - PVC (black).
D-subminiature
Backshells - Two-Piece
D*H Series
Plastic
Ethernet Right-AngleEthernet Straight
Diecast
Metallized
4-83
4
Call Toll Free: 1 (800) 323-9612
D-subminiature
Backshells - Two-Piece
D*H Series
Straight (180°) Standard Backshells
Plastic and Metallized Plastic Backshells
Dimensions
Shell A B C D E F
Size inmm inmm inmm inmm inmm inmm
E 1.225 31.12 1.547 39.29 0.640 16.26 0.645 16.38 0.400 10.16 0.984 24.99
A 1.540 39.12 1.516 38.51 0.640 16.26 0.645 16.38 0.400 10.16 1.312 33.32
B 2.090 53.09 1.655 42.04 0.710 18.03 0.645 16.38 0.522 13.26 1.857 47.17
C 2.730 69.34 1.830 46.48 0.906 23.01 0.645 16.38 0.725 18.42 2.500 63.50
D 2.645 67.18 1.855 41.12 0.940 23.88 0.750 19.05 0.725 18.42 2.406 61.11
4-84
4
Call Toll Free: 1 (800) 323-9612
D-subminiature
Backshells - Two-Piece
D*H Series
Dimensions
Shell A B C D E F
Size inmm inmm inmm inmm inmm inmm
E 1.225 31.12 1.465 37.21 0.620 15.75 0.620 15.75 0.400 10.16 0.984 24.99
A 1.540 39.12 1.600 40.64 0.620 15.75 0.620 15.75 0.400 10.16 1.312 33.32
B 2.090 53.09 1.570 39.88 0.690 17.53 0.620 15.75 0.525 13.34 1.857 47.17
C 2.730 69.34 1.810 45.97 0.862 21.89 0.620 15.75 0.725 18.42 2.500 63.50
D 2.624 66.65 1.800 45.72 0.862 21.89 0.730 18.54 0.725 18.42 2.406 61.11
Ordering Information
D*H T wo-Piece Backshells
Fits Fits
Shell Standard HTD 1.5 Cable Entry Cable Metalliz ed Cable Diecast Cable
Size Density Density Style Plastic Dia. (in) Plastic Dia. (in) Metal Dia. (in)
E 9 15 Straight (180°) DPH-E-001 .210-.320 DCH-E-001 .210-.350 DMH-E-001 .210-.320
A 15 26 Straight (180°) DPH-A-001 .210-.320 DCH-A-001 .210-.350 DMH-A-001 .210-.320
B 25 44 Straight (180°) DPH-B-001 .230-.450 DCH-B-001 .230-.450 DMH-B-001 .230-.450
C 37 62 Straight (180°) DPH-C-001 .350-.650 DCH-C-001 .350-.640 DMH-C-001 .350-.650
D 50 N/A Straight (180°) DPH-D-001 .350-.650 DCH-D-001 .350-.640 DMH-D-001 .350-.640
EMI/RFI Shielded Diecast Backshells
4-85
4
Call Toll Free: 1 (800) 323-9612
D-subminiature
Backshells - Two-Piece
D*H Series
Ordering Information
D*H Ethernet Diecast Backshells
Fits Fits
Shell Standard Cable Cable Entry A B C D E F
Size Density Diameter (in) Style in mm in mm in mm in mm in mm in mm
A 15 .210-.320 Straight (180°) DMH-A-001XL 1.550 39.37 1.880 47.75 0.710 18.03 0.64 16.26 0.522 13.26 1.312 33.32
A 15 .210-.320 Rt. Angle (90°) DMH-A-901X 1.550 39.37 1.880 47.75 0.710 18.03 0.64 16.26 0.522 13.26 1.312 33.32
Straight (180°) Diecast Ethernet Backshells
Right-Angle (90°) Diecast Ethernet Backshells
THUMBSCREWS (OPTIONAL) FOR D*H BACKSHELLS
Order #4-40-THMB-1 (two each required per backshell).
(Will not work with ether net type backshells)
4-86
Call Toll Free: 1 (800) 323-9612
FEATURES
■
The Cinch Super D Interconnection System is a simple , fast, economical, and reliable way for
mating connectors from cable to cable or cable to panel.
■
Snap-on Super D plastic hoods captivate connectors providing positive , self-latching, audible
mating with reliable retention and Latch-N-Lock quick release disconnect.
■
Snap-on Super-D plastic hoods are also available with filler ends to utilize 4-40
mounting hardware .
■
Super D hoods are available:
- Straight (180°) or Right-Angle (90°) cable entr y.
- Sizes: 9, 15, 25, and 37.
- Sizes 15, 25, and 37 are available in standard or large cable openings.
■
Black SDH backshells accommodate any standard metal shell IDC, solder cup, or crimp
and poke D-subminiature connector.
■
Gray SDH backshells accommodate the Cinch All-Plastic IDC T-Series connector on
pages 4-38 thru 4-39.
■
Each Super-D plastic hood includes a stay band to strain relief the cable wire . Stay band tool
SD-MSBT is required. Extra stay bands are available on page 4-90.
MATERIALS
Hood: Modified phenylene oxide - black for metal
shell connectors or gray for all-plastic
IDC connectors
Latch Block: Diecast zinc
Screws for Latching Blocks: Steel with nickel plating
Stay Band: Steel with zinc plating and clear chromate finish
D-subminiature Backshells - Super D
SDH Series
4-87
4
Call Toll Free: 1 (800) 323-9612
D-subminiature
Backshells - For use with Metal Shell Connectors
SDH Series
Straight (180°) Cable Entry Black Backshells for Metal Shell Connectors
Right-Angle (90°) Cable Entry Black Backshells for Metal Shell Connectors
Dimensions
A + .020" (.58mm) B +.020" (.58mm) C +.020" (.58mm) D +.020" (.58mm) E+.020" (.58mm)
Positions in mm in mm in mm in mm in mm
9 1.47 37.34 .31 7.87 - - 1.94 49.21 1.25 31.75
15 1.80 45.72 .31 7.87 .41 10.41 2.25 57.15 1.34 34.13
25 2.35 59.69 .33 8.40 .47 11.94 2.94 74.61 1.50 38.10
37 2.99 75.95 .37 9.40 .50 12.70 3.59 91.28 1.53 38.89
Adapter Hood with Filler Ends Adapter Hood with Latches
Right-Angle Adapter Hood
4-88
4
Call Toll Free: 1 (800) 323-9612
D-subminiature
Backshells - For use with Metal Shell Connectors
SDH Series
Straight (180°) Cable Entry Black Backshells for Metal Shell Connectors
Latching Blocks for Super D Adapter System
Latches Filler Ends Filler Ends w/4-40 Screws
Standard Large Standard Large Standard Large
Positions Cable Opening Cable Opening Cable Opening Cable Opening Cable Opening Cable Opening
9 SDH-9BL N/A SDH-9BF N/A SDH-9BFCS N/A
15 SDH-15BL SDH-15BLL SDH-15BF SDH-15BFL SDH-15BFCS SDH-15BFLCS
25 SDH-25BL SDH-25BLL SDH-25BF SDH-25BFL SDH-25BFCS SDH-25BFLCS
37 SDH-37BL SDH-37BLL SDH-37BF SDH-37BFL SDH-37BFCS SDH-37BFLCS
Ordering Information
Qty Required
Description For Panel Thickness Qty per pack Per SDH Hood Catalog Number
Latching Block N/A 1 each 2 each SD-LB
Latching Block with SEM Screws Up to .060" 2 each 2 each SD-LB-060
Removable Mounting Screws
for Adapter Hood N/A 1 each 2 each 4-40UNC2AX3/4
Latching Block with SEM Screws .060" to .080" 2 each 2 each SD-LB-060-080
Latching Block with SEM Screws .080” to .125" 2 each 2 each SD-LB-125
Ordering Information
Ordering Information
Latches
Standard Cable Large Cable
Positions Opening Opening
9 SDH-9RBL N/A
15 SDH-15RBL SDH-15RBLL
25 SDH-25RBL SDH-25RBLL
37 SDH-37RBL SDH-37RBLL
Right-Angle (90°) Cable Entry Black Backshells for Metal Shell Connectors
4-89
4
Call Toll Free: 1 (800) 323-9612
D-subminiature
Backshells - Gray with All-Plastic Connectors
SDH Series
Straight (180°) Cable Entry Gray Backshells for All-Plastic Connectors
Dimensions
A +.020" (.58mm) B +.020" (.58mm) C +.020" (.58mm)
Positions in mm in mm in mm
9 1.47 37.34 .31 7.87 --- ---
15 1.80 45.72 .31 7.87 .41 10.41
25 2.35 59.69 .33 8.40 .47 11.94
37 2.99 75.95 .37 9.40 .50 12.70
• Fits only T Ser ies All-Plastic IDC connector on pages 4-38 thru 4-39.
Ordering Information
Straight (180°) Cable Entry Gray Backshells for All-Plastic Connectors
Latches Filler Ends Filler Ends w/4-40 Screws
Standard Large Standard Large Standard Large
Positions Cable Opening Cable Opening Cable Opening Cable Opening Cable Opening Cable Opening
9 SDH-9GL N/A SDH-9GF N/A SDH-9GFCS N/A
15 SDH-15GL SDH-15GLL SDH-15GF SDH-15GFL SDH-15GFCS SDH-15GFLCS
25 SDH-25GL SDH-25GLL SDH-25GF SDH-25GFL SDH-25GFCS SDH-25GFLCS
37 SDH-37GL SDH-37GLL SDH-37GF SDH-37GFL SDH-37GFCS SDH-37GFLCS
4-90
4
Call Toll Free: 1 (800) 323-9612
D-subminiature
Backshells - Gray use with All-Plastic Connectors
SDH Series
Ordering Information
Latches
Standard Cable Large Cable
Positions Opening Opening
9 SDH-9RGL N/A
15 SDH-15RGL SDH-15RGLL
25 SDH-25RGL SDH-25RGLL
37 SDH-37RGL SDH-37RGLL
Ordering Information
Accessories for Gray Backshells
Optional Additional
Positions Strain Reliefs* Stay Bands**
9 SD-WC9 SD-9-15-SB
15 SD-WC15 SD-9-15-SB
25 SD-WC25 SD-25-37-SB
37 SD-WC37 SD-25-37-SB
Screw for screwlocking connector assembly - (2 each required): 4-40UNC2AX3/4.
* Two each required per backshell.
** Stay band tool #SD-MSBT required. See page 4-100..
Right-Angle (90°) Cable Entry Gray Backshells for All-Plastic Connectors
• Fits only IDC connectors on pages 4-38 thr u 4-39.
Dimensions
A +.020" (.58mm) B +.020" (.58mm) C +.020" (.58mm) D +.020" (.58mm)
Positions in mm in mm in mm in mm
9 1.94 49.21 .31 7.87 -- --- 1.25 31.75
15 2.25 57.15 .31 7.87 .41 10.41 1.34 34.13
25 2.94 74.61 .33 8.40 .47 11.94 1.50 38.10
37 3.59 91.28 .37 9.40 .50 12.70 1.53 38.89
See page 4-85 for latch block drawing.
Right-Angle (90°) Cable Entry Gray Backshells for All-Plastic Connectors
4-92
Call Toll Free: 1 (800) 323-9612
MATERIALS
■
Shell Material: Zinc-plated low carbon steel with yellow chromate finish.
■
Clamp: Zinc-plated steel with yellow chromate finish.
■
Screw: Zinc-plated steel with yellow chromate finish.
■
Stop Nut: Zinc-plated brass with yellow chromate finish.
Straight Clamp
D-subminiature
Junction Shells
Round Clamp
Right-Angle Clamp
Shell A B C E F G
Size Positions in mm in mm in mm in mm in mm in mm
A 15 1.531 38.89 .500 12.70 1.312 33.32 .296 7.52 .312 7.92 .640 16.26
B 25 2.078 52.78 .500 12.70 1.852 47.04 .296 7.52 .796 20.22 .640 16.26
C 37 2.718 69.04 .500 12.70 2.500 63.50 .296 7.52 .687 17.45 .640 16.26
D 50 2.625 66.68 .609 15.47 2.406 61.11 .390 9.91 .687 17.45 .703 17.86
Shell A B C D E F G
Size Positions in mm in mm in mm in mm in mm in mm in mm
A 15 1.531 38.89 .500 12.70 1.312 33.32 .406 10.31 .984 23.72 .125 3.18 1.031 26.19
B 25 2.078 52.78 .500 12.70 1.852 47.04 .593 15.06 1.515 38.48 .187 4.75 1.062 26.97
Shell A B C E F G H
Size Positions in mm in mm in mm in mm in mm in mm in mm
E 9 1.203 30.56 0.718 18.24 .984 24.99 .437 11.10 .437 11.10 .468 11.89 .281 7.14
A 15 1.531 38.89 0.718 18.24 1.312 33.32 .437 11.10 .437 11.10 .468 11.89 .281 7.14
B 25 2.078 52.78 0.968 24.59 1.852 47.04 .437 11.10 .625 15.88 .468 11.89 .281 7.14
C 37 2.718 69.04 1.187 30.15 2.500 63.50 .437 11.10 .812 20.62 .468 11.89 .281 7.14
D 50 2.625 66.68 1.250 31.75 2.406 61.11 .562 14.27 .906 23.01 .531 13.49 .343 8.71
E
4-93 Call Toll Free: 1 (800) 323-9612
Junction Shells - Metal
Fits
Shell Standard Straight Round Right-Angle Deep Straight Switching
Size Density Clamp Clamp Clamp Clamp Shell
E 9 N/A N/A DE-19977-5 DE-24657 N/A
A 15 DA-19678-1 DA-20961 DA-19977-1 DA-24658 DA-19678-6
B 25 DB-19678-2 DB-20962 DB-19977-2 DB-24659 DB-19678-7
C 37 DC-19678-3 N/A DC-19977-3 DC-24660 DC-19678-8
D 50 DD-19678-4 N/A DD-19977-4 DD-24661 DD-19678-9
D-subminiature
Junction Shells
Deep Straight Clamp
Switching Shell
Shell A B C D E F G H
Size Positions in mm in mm in mm in mm in mm in mm in mm in mm
E 9 1.203 30.56 .484 12.29 0.984 24.99 .578 14.68 .375 9.53 .375 9.53 .750 19.05 1.219 30.96
A 15 1.531 38.89 .484 12.29 1.312 33.32 .578 14.68 .713 18.11 .312 7.92 .750 19.05 1.250 31.75
B 25 2.078 52.78 .484 12.29 1.852 47.04 .578 14.68 1.000 25.40 .312 7.92 1.000 25.40 1.531 38.89
C 37 2.718 69.04 .484 12.29 2.500 63.50 .578 14.68 1.375 34.93 .312 7.92 1.000 25.40 1.531 38.89
D 50 2.625 66.68 .593 15.06 2.406 61.11 .687 17.45 1.406 35.71 .406 10.31 1.125 28.58 1.656 42.06
Shell A B C
Size Positions in mm in mm in mm
A 15 1.531 38.89 .500 12.70 1.312 33.32
B 25 2.078 52.78 .500 12.70 1.852 47.04
C 37 2.718 69.04 .500 12.70 2.500 63.50
D 50 2.625 66.68 .609 15.47 2.406 61.11
Ordering Information
F ± .015
Phenolic Hood
Shell Material: Phenolic (black).
#4-40 Screws: Steel with nickel plating.
Ordering Information
Plastic Hoods
Shell Standard Phenolic Straight Right
Size Density Hood Hood Angle
E 9 N/A DE-51218-1 N/A
A 15 DA-51225-1 DA-51210-1 DA-51211-1
B 25 DB-51226-1A DB-51212-1 DB-51213-1
C 37 N/A N/A N/A
D 50 N/A N/A N/A
All-Plastic Straight (180°) Hood
Shell Material: Nylon (gray).
#4-40 Screws: Steel with nickel plating.
All-Plastic Right-Angle (90°) Hood
Shell Material: Nylon (gray).
#4-40 Screws: Steel with nickel plating.
D-subminiature
Plastic Hoods
Shell A B C D E F G
Size Positions in mm in mm in mm in mm in mm in mm in mm
E 9 1.218 30.94 1.000 25.40 .984 23.72 .500 12.70 .562 14.27 .281 7.14 .218 7.14
A 15 1.546 38.27 1.000 25.40 1.312 33.32 .500 12.70 .562 14.27 .360 9.14 .360 9.14
B 25 2.093 53.16 1.250 31.75 1.852 47.04 .500 12.70 .562 14.27 .493 12.52 .360 9.14
Shell A B C D E
Size Positions in mm in mm in mm in mm in mm
A 15 1.297 32.94 1.219 30.96 .266 6.76 1.312 33.32 1.641 41.68
B 25 1.406 35.71 1.797 45.64 .328 8.33 1.852 47.04 2.203 55.96
Shell A B C D E F
Size Positions in mm in mm in mm in mm in mm in mm
A 15 1.822 46.28 1.000 25.40 1.312 33.32 .500 12.70 .562 14.28 .360 9.14
B 25 2.368 60.15 1.250 31.75 1.852 47.04 .500 12.70 .562 14.28 .360 9.14
Connector Not Included
Connector Not Included
4-94
Call Toll Free: 1 (800) 323-9612
4-96
Call Toll Free: 1 (800) 323-9612
Dust Caps
• For use with all Cinch D-subminiature connectors.
• Used to protect connector contacts when connector is not mated.
• Made of polyethylene (black).
Guide Pin Plates
•Aligns connectors before actual mating. Generally used in blind mate applications.
• Male or female guide plates will accommodate Cinch male or female connectors.
• Plate: Cold-rolled steel with cadmium plating and yellow chromate finish.
• Guide pin (male): Stainless steel, passivated.
• Screws, rivets (male plate), washers (male plate): Steel with cadmium plating and yellow chromate finish.
Ordering Information
Fits
Shell Standard A B C D F G K
Size Density Plug Socket in mm in mm in mm in mm in mm in mm in mm
E 9 N/A N/A
A 15 DA-22213 DA-22214 2.281 57.93 1.000 25.40 1.312 33.32 .750 19.05 .898 22.81 1.663 42.24 1.906 48.41
B 25 DB-22255 DB-22254 2.820 71.63 1.000 25.40 1.852 47.04 .750 19.05 1.168 29.67 2.203 55.96 2.446 62.13
C 37 DC-22070 DC-22071 3.468 88.09 1.000 25.40 2.500 63.50 .750 19.05 1.492 37.90 2.851 72.42 3.094 78.59
D 50 DD-21962 DD-21961 3.375 85.73 1.125 28.58 2.406 61.112 .874 21.88 1.437 36.50 2.749 69.82 3.000 76.20
D-subminiature
Accessories
Ordering Information
Fits Fits
Shell Standard A B C D
Size Density Catalog No. Description in mm in mm in mm in mm
E 9 DE-59-20 Socket .694 17.63 .627 15.93 .362 9.19 .295 7.49
E 9 DE-60-20 Plug .749 19.02 .682 17.32 .412 10.46 .345 8.76
A 15 DA-59-20 Socket 1.022 25.95 .955 24.25 .362 9.19 .295 7.49
A 15 DA-60-20 Plug 1.077 27.36 1.010 25.65 .412 10.46 .345 8.76
B 25 DB-59-20 Socket 1.562 39.67 1.495 37.97 .362 9.19 .295 7.49
B 25 DB-60-20 Plug 1.635 41.52 1.568 39.83 .430 10.92 .363 9.22
C 37 DC-59-20 Socket 2.210 56.13 2.143 54.43 .362 9.19 .295 7.49
C 37 DC-60-20 Plug 2.283 57.99 2.216 56.29 .430 10.92 .363 9.22
D 50 DD-59-20 Socket 2.116 53.75 2.049 52.04 .474 12.04 .407 10.34
D 50 DD-60-20 Plug 2.179 55.35 2.112 53.64 .536 13.61 .469 11.91
Plug Socket
4-97
4
Call Toll Free: 1 (800) 323-9612
Slide Lock Assemblies
•A slide lock assembly is a metal bracket offered with hardware necessary to mount into the standard connector
mounting holes. It consists of the lock retainer plate, two screws, two washers, and two nuts. Two lock posts are
required to fit into the mounting holes of the mating connector. These must be ordered separately.
• Compatible with all Cinch Backshells, Hoods, and Junction Shells
except
D*H Series, SDH Series, and phenolic hood.
• Compatible with all Cinch metal shell D-subminiature connectors.
Materials
•Slide Lock Plate: Stainless steel, passivated.
• Slide lock hex nut, washer #4-40 screw: Steel with zinc plating and yellow chromate finish.
• Lockpost, washer, lockwasher, and hex nut: Steel with zinc plating and yellow chromate finish.
D-subminiature
Accessories
Consists of Lock Retainer and two lock posts (order separately).
NOTE: Not compatible with D*H Series or SDH Ser ies backshells.
Ordering Information
Fits
Shell Standard Lock A B C
Size Density Retainer in mm in mm in mm
E 9 DE-51224-1 1.442 36.63 .500 12.70 0.984 24.99
A 15 DA-51220-1 1.770 44.96 .500 12.70 1.312 33.27
B 25 DB-51221-1 2.293 58.24 .500 12.70 1.852 47.04
C 37 DC-51222-1 2.958 75.13 .500 12.70 2.500 63.50
D 50 DD-51223-1 2.847 72.31 .609 15.47 2.406 62.48
Lock Post: #D53018. Two (2) required with each Slide Lock Assembly.
.145
4-98
4
Call Toll Free: 1 (800) 323-9612
D-subminiature Hardware
Accessories
Screwlocks
•Screwlocks are designed to retain the same size mated connectors together or to secure the connector to a rack/panel.
Screwlocks may be used on plugs or sockets.
• Female screwlocks consist of one #4-40 screw with a #4-40 hole in the top, two flat washers to accommodate different panel
thicknesses, one lockwasher, and one #4-40 nut. Military female screwlocks include three flat washers.
• Male screwlocks consist of one #4-40 slotted screw and a spring tension clip. Different sizes accommodate the various
connector flange sizes and types of backshells or hoods (if applicable).
• Two screwlocks are required per connector.
• Militar y screwlocks meet all requirements of MIL-C-24308.
Materials
Commercial Screwlock Assemblies:
• Male Screwlock Assembly: Clip and screw are steel with zinc plating and yellow chromate finish.
• Female Screwlock Assembly: Washers (2), lockwashers, hex nuts, and nuts are steel with zinc plating
and yellow chromate finish.
M24308 Militar y Screwlock Assemblies:
• Male Screwlock Assembly: Clip and screw are steel with cadmium plating and yellow chromate finish.
• Female Screwlock Assembly: Washers (3), lockwashers, hex nuts, and nuts are steel with cadmium plating and
yellow chromate finish.
Female Screwlock Male Screwlock
4-99
4
Call Toll Free: 1 (800) 323-9612
D-subminiature
Accessories
• Screwlock assemblies will not fit D*H or SDH Series backshells.
Male Screwlocks
Ordering Information
Shell Size E A B C D
Positions 9 15 25 37 50
AB
in mm in mm
Commercial:
D20419-0 0.250 56.35 0.033 0.84 P/S P/S S S
D20419-16 0.250 56.35 0.048 1.22 S* S* P/S* P/S*
D20419-21 0.281 63.34 0.059 1.50 P* P*
D20420-0 0.250 56.35 0.033 0.84 S
D20420-12 0.281 63.34 0.048 1.22 P/S*
D20420-15 0.281 63.34 0.059 1.50 P*
Military MIL-C-24308:
M24308/25-9F Per MIL spec P/S P/S P/S P/S
M24308/25-10F Per MIL spec P/S
NOTE: P = Plug, S= Socket
* Indicates use with junction shell
Female Screwlocks
Ordering Information
Shell Size E A B C D
Positions 9 15 25 37 50
A
in mm
Commercial:
D20418-2 0.312 70.32 P/S P/S P/S P/S P/S
D20418-39 0.628 141.55 P/S P/S P/S P/S P/S
Military MIL-C-24308:
M24308/26-1F Per MIL spec P/S P/S P/S P/S P/S
M24308/26-2F Per MIL spec P/S P/S P/S P/S P/S
NOTE: P = Plug, S= Socket
4-100
Call Toll Free: 1 (800) 323-9612
D-subminiature IDC
Termination Tools
Auto-Clinch™D Semi-Automatic Termination T ool
Auto Clinch D is a semi-automatic, pneumatically powered, and electrically
controlled termination machine designed to ter minate IDC D-subminiature
connectors. It employs a selective programmer and a common nest for
all four connector sizes and can be equipped to ter minate metal shell
connectors. It can also be optionally equipped with remote visual color
code display for training sequences. It has a provision for omission of wires.
Par t No.: ACD-432 Auto-Clinch D T ool
Certi-Clinch™D Field T ermination T ool
*For 24-26 AWG Wire
Cer ti-Clinch D is designed for mass termination of individual wires,
eliminating wire stripping, solder ing, and crimping. It handles all four
connector sizes, is readily portable, and requires no set-up time and little
operator time. Rugged, all-metal construction affords trouble-free long life.
For metal shell IDC D-subminiature connectors.
Par t No. SD-CCWN
For all-plastic IDC D-subminiature connectors.
Par t No. SD-CC
Conversion nest for converting all-plastic type to metal shell.
Par t No. SD-CCN
Certi-Clinch D Field
T ermination T ool
Uni-Clinch Hand
Insertion T ool
Uni-Clinch™D Single-Wire Hand Insertion Tool
Designed to inser t one 22-26 AWG wire at a time, Uni-Clinch D is used
as a field repair tool by field service engineers.
Par t No. SD-UC
Super D™Manual Stay Band Tool
Designed for applying the steel stay band/strain relief to the cable before
termination of wires to the connector, the manual Stay Band Tool applies
both stay band sizes to the full range of cable sizes.
Par t No. SD-MSBT
NOTE: All termination tools on this page are used in conjunction with T* Ser ies D-subminiature connectors.
Manual T ool
4-101 Call Toll Free: 1 (800) 323-9612
D-subminiature Crimp and Poke
Termination Tools
Two types of transpor t for connector chains
are available with crimping ranges of 20
through 30 AWG for B crimpings
Par t Number
D*A Series
20 through 26 AWG Wire GHC-B
D*A Series
28 through 30 AWG Wire GHC-B1
HTD Series HTD-266
Par t Number
D*A Series HTD-544
D*U Series BT-20-HC
HTD Series HTD-544
Par t Number
D*A Series CIET-20-HDB
D*U Series CIET-20-HDB
HTD Series CIET-22-DF
Contact Crimp Hand Tool
(HTD-544)
Contact Inser tion/Extraction Hand Tool
For D*A and D*U Ser ies for Stamped
Contacts
(CIET-20-HDB)
Contact Crimp Hand Tool
(300 Contact Reel)
Contact Inser tion/Extraction Hand Tool
For D1/2 Contacts
(CIET-22-DF)
Contact Crimp Hand Tool
(BT-20-HC)
Contact Insertion/Extraction Tool for Stamped Contacts
Hand Crimping Tool for Loose Stamped Contacts
Hand Crimping Tool for Stamped Contact 300 PC Reels
4-102
4
Call Toll Free: 1 (800) 323-9612
Ordering Information
Stripper Crimper
Description Par t Number Comments Catalog Number
D*A Series 599-11-11-578 Comes equipped with the applicator
Stripper Cr imper Only for 20-24 AWG contacts
D*A Series 598-98-97-630 Applicator only
Applicator Only For 20-24 AWG contacts ASC-20-24
For 20-24 AWG
D*A Series 598-98-97-632 Applicator only
Applicator Only For 26-30 AWG contacts ASC-26-30
For 26-30 AWG
HTD Series 599-11-11-518 Comes equipped with applicator
Stripper Cr imper Only for 22-28 AWG contacts HTD-518
HTD Ser ies 598-98-97-636 Applicator only
Applicator Only For 22-28 AWG contacts ASC-DH
22-28 AWG
D*U Series 599-11-11-258 Comes equipped with applicator
Stripper Cr imper Only for 20-28 AWG contacts
D*U Series 598-98-97-638 Applicator only
Applicator Only For 20-28 AWG contacts ASC-DU
20-28
Stripper Crimper Spare Par ts
Par t Number Description Catalog Number
598-98-97-631 D*A Punch & Anvil Kit 20-24 AWG SCPA-631
598-98-97-633 D*A Punch & Anvil Kit 26-30 AWG SCPA-633
598-98-97-637 HTD Series Punch & Anvil Kit SCPA-637
598-98-97-639 D*U Series Punch & Anvil Kit SCPA-639
598-98-97-640 Stripping Blades for 20-24 AWG Wire SCSB-640
598-98-97-641 Stripping Blades for 26-30 AWG Wire SCSB-641
598-98-97-642 D*A Series Contact shear blade SCCS-642
598-98-97-643 Shear blade holder SCSH-643
598-98-97-644 Sensor switch SCSS-644
598-98-97-645 Strip blade holder SCBH-645
D-subminiature Crimp and Poke
Termination Tools
Semi-Automatic Stripping and Crimping Tool
Our GSC-20-30 crimp machine in
operation with stripper crimper and
quick change tool
Advantages and Characteristics
• Stripping and cr imping in one easy operation
• Easy to install and adjust
• Requires little maintenance
• Wearing par ts replaced in a matter of minutes
• Long ser vice life thanks to best-quality materials
• Different quick change applicators in the same stripper cr imper
• Increased productivity
GSC-20-30
ESC-20-3
4-103
4
Call Toll Free: 1 (800) 323-9612
D-subminiature Crimp and Poke
Termination Tools
Metal Shell High-Reliability Crimp
and P oke Termination T ool
Hand crimping tool for high-reliability
machined D*U, Ser ies 3, and M24308
Crimp and Poke contacts.
M22520/2-01
NOTE: Positioner required with
crimping tool
Metal Shell Military Crimp and Poke
Insertion/Extraction T ool
For inserting or extracting machined D*U,
Series 3, or M24308 Cr imp and Poke
contacts.
Part No.: CIET-20-HD
Coaxial and High-Voltage Contact
Extraction T ool
For extracting co-axial and high-voltage
contacts from metal shell high-reliability
connectors.
Part No.: CET-C6B
Pneumatic Bench Top Press for
Crimping Ferrules
This lightweight, por table press is used
to crimp the ferrules on the over mold
shielding hardware kits. Crimp dies
ordered separately.
Par t No.: 599-11-11-551
Catalog No.: FCT-551
Hand Tool for Crimping Ferrules
and Coax Contacts
Uses same crimp dies as pneumatic tool.
Par t No.: 599-11-11-552
Catalog No.: FCT-552
M22520/2-01
FCT-552
FCT-551
CET-C6B
CET-20-11
CIET-20-HD
Positioner--A device when attached
to a crimping tool that locates the
contact in the correct position.
Positioner for machined contacts
D*U Series Positioner
Par t No.: 599-11-11-580
Catalog No.: EP-580
Series 3 and M24308 Connector Positioner
Par t No.: 598-98-97-618
Catalog No.: M22520/2-08
Catalog Part Crimp Die Crimp Die
Number Number Type Part No. Catalog No.
CF-51 462-44-22-451 1 598-98-97-607 CD-07
CF-42 462-44-22-442 1 598-98-97-600 CD-00
CF-43 462-44-22-443 1 598-98-97-601 CD-01
CF-44 462-44-22-444 1 598-98-97-602 CD-02
CF-45 462-44-22-445 1 598-98-97-603 CD-03
CF-46 462-44-22-446 1 598-98-97-604 CD-04
CF-47 462-44-22-447 2 598-98-97-605 CD-05
CF-50 462-44-22-450 2 598-98-97-606 CD-06
Military Extraction Tip Only
For extracting high-reliability machined
D*U, Series 3, or M24308 Crimp and Poke
contacts.
Part No.: CET-20-11
Crimp Ferrule
