Preface, Table of Contents Applications SIPROTEC Line Differential Protection / Distance Protection Devices 7SD5, 7SD610 7SA6, 7SA522 V4.6 Breaker Management Relay 7VK61 V4.6 IEC 61850 PIXIT C53000-G1176-C186-3 Basics Mapping Literature, Index 1 2 3 Disclaimer of Liability Although we have carefully checked the contents of this publication for conformity with the hardware and software described, we cannot guarantee complete conformity since errors cannot be excluded. The information provided in this manual is checked at regular intervals and any corrections that might become necessary are included in the next releases. Any suggestions for improvement are welcome. Subject to change without prior notice. Document Release V04.20.01 Edition 11.2007 Siemens Aktiengesellschaft Copyright Copyright (c) Siemens AG 2006 The reproduction, transmission or use of this document or its contents is not permitted without express written authority. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Registered Trademarks SIMATIC(R), SIMATIC NET(R), SIPROTEC(R), DIGSI(R), SICAM(R) and SINAUT(R) are registered trademarks of SIEMENS AG. All other product and brand names in this manual might be trademarks, the use of which by third persons for their purposes might infringe the rights of their respective owners. Order No.: C53000-G1176-C186-3 Preface Purpose of this manual In this Manual, you will find the Specification of the applications of the IEC 61850 interface General information about the effects of configuration of your device to the different Logical Nodes and DOIs Mapping of the information relevant to the device on the Logical Node of protocol IEC61850. Target audience This manual is intended mainly for all persons who configure, parameterize and operate a SIPROTEC Device 7SD5, 7SD610, 7SA522, 7SA6 or 7VK61. Scope of validity of this Manual SIPROTEC 7SA6, Version 4.60 and higher SIPROTEC 7SA522, Version 4.60 and higher SIPROTEC 7SD5, Version 4.60 and higher SIPROTEC 7SD610, Version 4.60 and higher SIPROTEC 7VK61, Version 4.60 and higher Standards This document has been created according to the ISO 9001 quality standards. Further Support If you have questions about SIPROTEC IEC 61850 interface, please contact your Siemens sales representative. SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 3 4 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Table of contents 1 2 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 1.2 Association model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 1.3 Server model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 1.4 Data set model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 1.5 Substitution model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 1.6 Setting group control model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 1.7 1.7.1 1.7.2 Reporting model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unbuffered Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Buffered Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 16 17 1.8 Logging model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 1.9 Generic substation model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 1.10 Transmission of sample values model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 1.11 Control model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 1.12 Time and time synchronisation model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 1.13 File transfer model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 1.14 General items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 1.15 TISSUES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 2.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 2.2 2.2.1 2.2.2 2.2.3 2.2.4 2.2.5 2.2.6 Effects of Configuration to the Logical Nodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Function parameters general. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Function parameters SIPROTEC 7SA6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Function parameters SIPROTEC 7SA522. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Function parameters SIPROTEC 7SD5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Function parameters SIPROTEC 7SD610 . . . . . . . . . . . . . . . . . . . . . . . . . . . . Function parameters SIPROTEC 7VK61. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 34 35 39 43 48 51 2.3 Allocation of Logical Nodes to Logical Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 2.4 2.4.1 2.4.2 Logical Node LLN0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Logical Device PROT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Logical Devices MEAS, CTRL, DR and EXT. . . . . . . . . . . . . . . . . . . . . . . . . . . 58 58 59 2.5 2.5.1 2.5.2 The DOI Behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Logical Device PROT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Logical Devices MEAS, CTRL, DR and EXT . . . . . . . . . . . . . . . . . . . . . . . . . . 60 60 61 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 5 3 6 Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 3.1 3.1.1 3.1.2 3.1.3 Differential Protection (PDIFx, PTRCx) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-DIFF> (PDIF1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-DIFF>> (PDIF2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Differencial Protection General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 64 65 67 3.2 3.2.1 3.2.2 3.2.3 3.2.4 3.2.5 3.2.6 3.2.7 Distance Protection (PDISx, PTRC2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Distance protection zone 1 (PDIS1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Distance protection zone 1B (PDIS10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Distance protection zone 2 (PDIS2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Distance protection zone 3 (PDIS3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Distance protection zone 4 (PDIS4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Distance protection zone 5 (PDIS5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Distance protection general information (PTRC2) . . . . . . . . . . . . . . . . . . . . . . . 74 74 80 86 89 92 95 98 3.3 3.3.1 3.3.2 3.3.3 3.3.4 3.3.5 3.3.6 3.3.7 Power swing detection (RPSBx). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power swing detection zone 1 (RPSB1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power swing detection zone 1B (RPSB10). . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power swing detection zone 2 (RPSB2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power swing detection zone 3 (RPSB3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power swing detection zone 4 (RPSB4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power swing detection zone 5 (RPSB5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power swing trip command (RPSB6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 103 105 107 109 111 113 115 3.4 Teleprotection for distance protection (PSCH1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 3.5 3.5.1 3.5.2 3.5.3 3.5.4 Earth fault overcurrent protection in earthed systems (PTOCx) . . . . . . . . . . . . . . . . Earth fault 3I0 > (PTOC5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Earth fault 3I0 >> (PTOC6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Earth fault 3I0 >>> (PTOC7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Earth fault 3I0p (PTOC8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 123 125 127 129 3.6 Earth fault detection in non-earthed systems (PSDE1) . . . . . . . . . . . . . . . . . . . . . . 131 3.7 Restricted earth fault protection (PDIF3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 3.8 3.8.1 3.8.2 3.8.3 3.8.4 3.8.5 3.8.6 Overcurrent protection (PTOCx). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O/C Ip (PTOC1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O/C I> (PTOC2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O/C I>> (PTOC3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O/C I>>> (PTOC4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Directional O/C Ip (PTOC9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Directional O/C I> (PTOC10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 137 138 139 141 143 145 3.9 Automatic reclosure function (RREC1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 3.10 Synchronism and voltage check (RSYN1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 3.11 3.11.1 3.11.2 3.11.3 3.11.4 3.11.5 3.11.6 3.11.7 3.11.8 3.11.9 3.11.10 3.11.11 3.11.12 3.11.13 3.11.14 3.11.15 3.11.16 Under and overvoltage protection (PTUVx, PTOVx) . . . . . . . . . . . . . . . . . . . . . . . . Under voltage protection Uph-e < (PTUV1). . . . . . . . . . . . . . . . . . . . . . . . . . . . Undervoltage protection Uph-e<< (PTUV2). . . . . . . . . . . . . . . . . . . . . . . . . . . . Undervoltage protection Uphph< (PTUV3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . Undervoltage protection Uphph<< (PTUV4) . . . . . . . . . . . . . . . . . . . . . . . . . . . Undervoltage protection U1< (PTUV5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Undervoltage protection U1<< (PTUV6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overvoltage protection Uph> (PTOV1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overvoltage protection Uph-e>> (PTOV2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overvoltage protection Uphph> (PTOV3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overvoltage protection Uphph>> (PTOV4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overvoltage protection 3U0> (PTOV5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overvoltage protection 3U0>> (PTOV6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overvoltage protection U1> (PTOV7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overvoltage protection U1>> (PTOV8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overvoltage protection U2> (PTOV9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overvoltage protection U2>> (PTOV10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 152 154 156 158 160 161 162 164 166 168 170 171 172 173 174 175 3.12 3.12.1 3.12.2 3.12.3 3.12.4 3.12.5 3.12.6 3.12.7 3.12.8 Frequency protection (PTUFx, PTOFx). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Underfrequency protection FQS stage f1 (PTUF1) . . . . . . . . . . . . . . . . . . . . . . Underfrequency protection FQS stage f2 (PTUF2) . . . . . . . . . . . . . . . . . . . . . . Underfrequency protection FQS stage f3 (PTUF3) . . . . . . . . . . . . . . . . . . . . . . Underfrequency protection FQS stage f4 (PTUF4) . . . . . . . . . . . . . . . . . . . . . . Overfrequency protection FQS stage f1 (PTOF1) . . . . . . . . . . . . . . . . . . . . . . . Overfrequency protection FQS stage f2 (PTOF2) . . . . . . . . . . . . . . . . . . . . . . . Overfrequency protection FQS stage f3 (PTOF3) . . . . . . . . . . . . . . . . . . . . . . . Overfrequency protection FQS stage f4 (PTOF4) . . . . . . . . . . . . . . . . . . . . . . . 176 176 178 180 182 184 186 188 190 3.13 Fault locator (RFLO1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192 3.14 Circuit breaker failure protection (RBRF1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 3.15 Thermal overload protection (PTTR1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 3.16 3.16.1 3.16.2 Single-pole / threepole tripping Circuit Breaker (XCBRx) . . . . . . . . . . . . . . . . . . . . Threepole tripping (XCBR1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Single-pole / threepole tripping (XCBR2, XCBR3, XCBR4). . . . . . . . . . . . . . . . 198 198 201 3.17 Tripping Logic of the Entire Device (PTRC1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 3.18 3.18.1 Device (LPHD1, CALH1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Alarm-, Warn- and Group alarms (CALH1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 213 3.19 3.19.1 3.19.2 3.19.3 3.19.4 3.19.5 3.19.6 3.19.7 3.19.8 3.19.9 Measurements (MMXUx, MSQI1, MMTR1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Measured values of local device (MMXU1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote measured values of relay 1 (MMXU2) . . . . . . . . . . . . . . . . . . . . . . . . . Remote measured values of relay 2 (MMXU3) . . . . . . . . . . . . . . . . . . . . . . . . . Remote measured values of relay 3 (MMXU4) . . . . . . . . . . . . . . . . . . . . . . . . . Remote measured values of relay 4 (MMXU5) . . . . . . . . . . . . . . . . . . . . . . . . . Remote measured values of relay 5 (MMXU6) . . . . . . . . . . . . . . . . . . . . . . . . . Remote measured values of relay 6 (MMXU7) . . . . . . . . . . . . . . . . . . . . . . . . . Measured values, symmetrical components (MSQI1) . . . . . . . . . . . . . . . . . . . . Power Metering (MMTR1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 216 220 223 226 229 232 235 238 240 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 7 3.20 Oscillographic Fault Records (RDRE1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Literature Index 8 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Applications 1 Contents This chapter specifies the protocol implementation extra information for testing (PIXIT) of the IEC 61850 interface in SIPROTEC 7SD / 7SA / 7VK V4.6. 1.1 General 10 1.2 Association model 11 1.3 Server model 12 1.4 Data set model 13 1.5 Substitution model 14 1.6 Setting group control model 15 1.7 Reporting model 16 1.8 Logging model 19 1.9 Generic substation model 20 1.10 Transmission of sample values model 22 1.11 Control model 23 1.12 Time and time synchronisation model 25 1.13 File transfer model 26 1.14 General items 27 1.15 TISSUES 28 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 9 Applications 1.1 General 1.1 General This chapter specifies the protocol implementation extra information for testing (PIXIT) of the IEC 61850 interface in SIPROTEC 7SD / 7SA / 7VK V4.6. It is based on the service subset definition given in the protocol implementation conformance statement (PICS), which is specified within the user manual SIPROTEC 4 Ethernet Module EN 100 IEC 61850 Electrical/optical Interface 100 MBit, Manual /1/. The following applicable ACSI service models are specified: Association model Server model Data set model Substitution model Setting group control model Reporting model Logging model Generic substitution model Transmission of sample values model Control model Time and time synchronisation model File transfer model General items Together with the PICS and the MICS the PIXIT forms the basis for a conformance test according to IEC 61850-10. The mapping between the IEC 61850 server data model and the SIPROTEC specific data is specified in Chapter 3. 10 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Applications 1.2 Association model 1.2 Association model Description Value / Clarification Maximum number of clients that can set-up an association simultaneously 5 Lost connection detection time range (default range of TCP_KEEPALIVE is 1 - 20 seconds) 10 seconds Is authentication supported N What called association parameters are necessary for successful association ? Transport selector Y Session selector Y Presentation selector Y AP Title ANY AE Qualifier ANY Where Y means: as defined within the ICD-File ANY means: any value accepted What is the maximum and minimum MMS PDU size ? Max MMS PDU size 32768 Min MMS PDU size What is the typical startup time after a power supply interrupt ? 15 SECONDS <additional items> SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 11 Applications 1.3 Server model 1.3 Server model Description Value / Clarification Which analogue value (MX) quality bits are supported (can be set by server) ? Validity: Y Good, Y Invalid, N Reserved, Y Questionable Y Overflow Y OutofRange N BadReference N Oscillatory Y Failure Y OldData N Inconsistent Y Inaccurate Source: Y Process N Substituted Y Test Y OperatorBlocked Which status value (ST) quality bits are supported (can be set by server) ? Validity: Y Good, Y Invalid, N Reserved, Y Questionable N BadReference Y Oscillatory Y Failure Y OldData N Inconsistent N Inaccurate Source: Y Process Y Substituted Y Test Y OperatorBlocked What is the maximum number of data values in one GetDataValues request ? Not restricted; depends on the max. MMS PDU size given above. What is the maximum number of data values in one SetDataValues request ? Not restricted; depends on the max. MMS PDU size given above. No Data Attribute within our object directory is writable with the service SetDataValues. <additional items> 12 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Applications 1.4 Data set model 1.4 Data set model Description Value / Clarification Maximum number of data elements in one data set Not limited by an internal configuration parameter. It depends on the available memory. How many persistent data sets can be created by one or more clients ? 64 data sets for each LD. It depends on the available memory. How many non-persistent data sets can be created by one or more clients ? 10 data sets. It depends on the available memory. additional items: Maximum number of data sets SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Could not be defined, it depends on the available memory space. In principle, this information it not necessary from type conformance testing standpoint. 13 Applications 1.5 Substitution model 1.5 Substitution model This service will not be supported (see also SIPROTEC 4 Ethernet Module EN 100 IEC 61850 Electrical/optical Interface 100 MBit, Manual /1/). 14 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Applications 1.6 Setting group control model 1.6 Setting group control model Description Value / Clarification What is the number of supported setting groups for each logical device ? Setting groups available for LLN0 only in LD PROT. The number of supported setting groups is 1 or 4, it depends on the given configuration. Specified in the ICD-File. What is the effect of when and how the non-volatile storage is updated ? (compare IEC 61850-8-1 $16.2.4) Just SelectActiveSG service will supported according to PICS. <additional items> SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 15 Applications 1.7 Reporting model 1.7 Reporting model 1.7.1 Unbuffered Report Description Value / Clarification The supported trigger conditions are Y Y Y Y Y Integrity Data change Quality change Data update General Interrogation The supported optional fields are Y Y Y Y Y N N Y Y Sequence-number Report-time-stamp Reason-for-inclusion Data-set-name Data-reference Buffer-overflow EntryID Conf-rev Segmentation Can the server send segmented reports ? Y Mechanism on second internal data change notification of the same analogue data value within buffer period (Compare IEC 61850-7-2 $14.2.2.9) Send report immediately Multi client URCB approach (Compare IEC 61850-7-2 $14.2.1) All clients can access all URCB's additional items: Interrupt of general interrogation Running GI could not be interrupted. If a new GI request occurs during a running GI, the current GI will be finished first before the second GI request will be processed. Integrity period Configurable >=1 second; Dynamic URCB reservation after an abort of the client/server association Reservation of the URCB is lost. After a re-establishment of the association the URCB reservation has to be done by the client before. This behavior is implemented to avoid unnecessary memory residuals if temporarily client associations (e.g. for maintenance) are established. Configured URCB reservation after an abort of the client/server association Reservation of the URCB is not lost. 16 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Applications 1.7 Reporting model 1.7.2 Buffered Report Description Value / Clarification The supported trigger conditions are Y Y Y Y Y The supported optional fields are Y Sequence-number Y Report-time-stamp Y Reason-for-inclusion Y Data-set-name Y Data-reference Y Buffer-overflow Y EntryID Y Conf-rev Y Segmentation Can the server send segmented reports ? Y Mechanism on second internal data change notification of the same analogue data value within buffer period (Compare IEC 61850-7-2 $14.2.2.9) Buffer the Entry Send report if the report is enabled Multi client BRCB approach (Compare IEC 61850-7-2 $14.2.1) All clients can access all BRCB's What is the format of EntryID ? First 2 Byte : Integer Last 6 Bytes: BTime6 time stamp What is the buffer size for each BRCB or how many reports can be buffered ? About 1 MB are available for the buffering. Each BRCB has an extension attribute Memory that display the percentage of those 1 MB that have been reserved/forseen for its own entries. Default amount 1 MB/(2*Number of logical devices) Integrity Data change Quality change Data update General Interrogation additional items: Interrupt of general interrogation Running GI could not be interrupted. If a new GI request occurs during a running GI, the current GI will be finished first before the second GI request will be processed. Integrity period Configurable >=1 second; Dynamic BRCB reservation after an abort of the client/server association Reservation of the BRCB has been fixed with TISSUE 453. The value of the attribute ResvTms delivers the time interval during which the reservation is still active after the connection has been lost. In case a BRCB is still reserved, and a client connects with the same IP address as the one used during the reservation, then the BRCB attribute can be written by this client without prior setting the ResvTms attribute as long as the reservation timer has not expired. SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 17 Applications 1.7 Reporting model Configured BRCB reservation after an abort of the client/server association Reservation of the BRCB is not lost for BRCBs that have been pre-associated to a specific client (pre-association defined with means of the CLientLN element with the BRCB instantiation in the SCD file). Reservation of a BRCB is lost for BRCBs, that have not been pre-associated to a specific client, after the expiration of the reservation timer set with the ResvTms attribute. In case ResvTms is not set (backward compatibility), ResvTms will get a default value for all preconfigured BRCBs that are not pre-associated to a specific client. Optional use of a flow control for transmitting history of a BRCB As specified in the IEC61850-7-2, transmission of entries may required some times, depending of the amount of entries that have to be transmitted. Therefore, the SIPROTEC has an optional flow control feature to accelerate the transmission of the entries: each BRCB has an extended attribute MaxOutReports that can be set from the associated-client to change the transmmision strategy of the entries. The number ordered will then be transmitted as long as they exist in the buffer; the server then reset the attribute to 0 and wait for the client to set it again in order to continue the history transmission with MaxOutReports entries. The attribute only influences the flow control of entries while dealing with the history, and not after the history transmission has completed. 18 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Applications 1.8 Logging model 1.8 Logging model This service will not be supported (see also SIPROTEC 4 Ethernet Module EN 100 IEC 61850 Electrical/optical Interface 100 MBit, Manual /1/). SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 19 Applications 1.9 Generic substation model 1.9 Generic substation model Description Value / Clarification What is the behavior when one subscribed GOOSE message isn't received or syntactically incorrect ? The telegram will be discarded (i.e not forwarded to the application) since it is corrupt or syntactically incorrect and therefore not readable. The data objects will be declared as invalid after a timeout detection since no telegram have been received by the application. What is the behavior when a subscribed GOOSE message is out-of-order ? Error message will be stored into the error buffer (could be accessed by EN100 web-server). All expected data objects will be declared as invalid. What is the behavior when a subscribed GOOSE message is duplicated ? The sequence number given in the GOOSE-message is out-of-order. Error message will be stored into the error buffer (could be accessed by EN100 web-server). All expected data objects will be declared as invalid. additional items: Maximum number of GOOSE messages which could be sent <= 16 ; It depends on the available memory. Maximum number of GOOSE messages which could be received <= 128 ; It depends on the available memory. Interpretation of GOOSE messages at subscriber side 1. Received GOOSE data objects without assigned quality attribute are interpreted as invalid. 2. Received GOOSE data objects which quality attribute are set to questionable are changed to invalid. GOOSE subscriber behavior in case of missing GOOSE messages After a GOOSE multicast application association has been interrupted, the reception of the second consecutive GOOSE telegram is required to validate the state of this GOOSE association again. However, the IED tolerates a missing telegram as long as the next telegram (expected n, received n+1) is received within the time allowed to live time out detection (the time allowed to live timeout detection occurs after 2*TAL). GOOSE subscriber behaviour in case of multiple GOOSE messages If a message is received twice or more, the IED already reports an error after the second reception. Therefore, network configuration error can be more easily tracked. What is the behavior when a GOOSE header parameter is mismatching with the expected one? (datSet, goID, confRev, numDatSetEntries, number of allData) Error message will be stored into the error buffer (could be accessed by EN100 web-server). All expected data objects will be declared as invalid. What is the behavior when a timeAllowedToLive is 0? Error message will be stored into the error buffer (could be accessed by EN100 web-server) since the timeAllowedToLive expired. All expected data objects will be declared as invalid. 20 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Applications 1.9 Generic substation model What is the behavior when there is an outof-order entry in the allData? The confRev attribute in the header guarantees that the allData entries are in the correct order. Therefore, it's necessary to check the confRev attribute. There is no chance to detect such an out-of-order. What is the behavior when no telegram is received within a TAL timeout? To avoid an incorrect timeout detection, the subscriber detects a timeout after a period of 2xTAL. The information is then declared as questionable, oldData. What is the behavior when a GOOSE header parameter goCBRef is mismatching with the expected one? Since the goCBRef shall be unique stationwide, the received telegram with the mismatched goCBRef will be discarted: it has not been published. In that case only the timeout detection will set the data to invalid. What is the behavior when a GOOSE header parameter APPID is mismatching with the expected one? The APPID is a link layer parameter. It is used as a filter on link layer. If the APPID is mismatching, the tellegram will therefore be discarded on link layer without notifying the application. Only the timeout detection will set the data to invalid. What is the behavior when a GOOSE header parameter t is not increasing? The t parameter is not checked. Therefore it doesn't lead to any error detection. What is the behavior when numDatSetEntries and number of allData are inconsistent? The telegram is discarded since it is corrupt (not well formed). After the timeout detection (no telegram forwarded to the application) the data objects are declared invalid. SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 21 Applications 1.10 Transmission of sample values model 1.10 Transmission of sample values model Compare the "Implementation Guidelines for Electrical Current and Voltage Transducers according to IEC 60044-7/8 with Digital Output according to IEC 61850-9-2; Version 1.0; as specified by ABB, Areva, Landis+Gyr, OMICRON and SIEMENS This service will not be supported (see also SIPROTEC 4 Ethernet Module EN 100 IEC 61850 Electrical/optical Interface 100 MBit, Manual /1/). 22 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Applications 1.11 Control model 1.11 Control model Description Value / Clarification What control models are supported ? Y Y N Y Y Is Time activated operate (operTm) supported N What is the behavior when the test attribute is set in the SelectWithValue and/or Operate request ? Will be acknowledged with negative response. The AddCause attribute will be set to "not supported" What are the conditions for the time (T) attribute in the SelectWithValue and/or Operate request ? Time attribute is not relevant. Is "operate-many" supported ? N Is pulse configuration supported ? N What check conditions are supported ? Y Synchrocheck Y Interlock-check What service error types are supported ? Y Y Y Y Y Y Y Y Y Y Y Y SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Status-only Direct-with-normal-security Sbo-with-normal-security Direct-with-enhanced-security Sbo-with-enhanced-security Instance-not-available Instance-in-use Access-violation Access-not-allowed-in-current-state Parameter-value-inappropriate Parameter-value-inconsistent Class-not-supported Instance-locked-by-other-client Control-must-be-selected Type-conflict Failed-due-to-communications Constraint failed-due-to-server-constraint 23 Applications 1.11 Control model What additional cause diagnosis are supported ? N Y Y Y Y Y Y Y Y Y Y N Y Y Y N Y Blocked-by-switching-hierarchy Select-failed Invalid-position Position-reached Parameter-change-in-execution Step-limit Blocked-by-Mode Blocked-by-process Blocked-by-interlocking Blocked-by-synchrocheck Command-already-in-execution Blocked-by-health 1-of-n-control Abortion-by-cancel Time-limit-over Abortion-by-trip Object-not-selected What additional cause diagnosis extensions are supported ? Y Y Y Y Y Y Plausibility_error Parameter_setting_invalid Hardware_error System_overload Internal_fault Command_sequence_error Changing the control services by configuration N Inconsistency between Select and (Oper or cancel) Oper or cancel will be acknowledged with negative response if inconsistencies to the select request are detected. The following attributes will not be checked in this case: T (Time) Cancel request could be sent after an operate request. Y Format of the control time stamp attribute ? TimeStamp instead of EntryTime acc. to the 7-2 Errata List. Negative response for select request could be performed only If test mode is activated or If the selection is always done. additional items: 24 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Applications 1.12 Time and time synchronisation model 1.12 Time and time synchronisation model Description Value / Clarification What kind of quality bits are supported ? N LeapSecondsKnown Y ClockFailure Y ClockNotSynchronized What kind of quality accuracy bits are supported ? Y Invalid N Unspecified What is the behavior when the time synchronization signal/messages are lost ? The quality attribute "ClockFailure" will be set to TRUE after a configured time period. What is the behaviour when the time synchronisation messages indicate that the stratum is greater than 3? A stratum with a value greater than 3 with the SNTP time synchronization messages indicates that the time server has a questionable synchronisation. It might also indicate that no GPS connection are available. Therefore the time quality attribute "ClockNotSynchronized" will be set to TRUE as long as the stratum content is greater than 3. additional items: What is the behavior at start up time when a time synchronization via SNTP is configured ? SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 The "ClockNotSynchronized" attribute is set to TRUE as long as no time synchronization is established. 25 Applications 1.13 File transfer model 1.13 File transfer model Description Value / Clarification What is structure of files and directories? Directory name / COMTRADE / *; Directory name / LD / *; Files according to the comtrade standard. What is the resulting behavior if no file specification is present in the file directory request? If no file specification is present in the directory request, all files are returned - not only the files in the root directory. Is the IETF FTP protocol also implemented ? N Directory names are separated from the file name by "/" The maximum file name size including path (default 64 chars) 64 Are directory/file name case sensitive Case sensitive Maximum file size Not limited by implementation or configuration. Depends on available memory. additional items: Maximum number of clients that can use the FTP service simultaneously 1 Maximum number of files that can be accessed simultaneously 1 26 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Applications 1.14 General items 1.14 General items Description Value / Clarification IED behavior when the Logical Device is blocked : LLN0.Mod.stVal = blocked Unlike the definition of the Data Objects "Mod/Beh" in IEC 61850-7-4, outputs to the process will be generated. Details to this behavior are specified in SIPROTEC 4 Ethernet Module EN 100 IEC 61850 Electrical/optical Interface 100 MBit, Manual /1/ additional items: GOOSE Proxy object To be able to subscribe Data over GOOSE, Proxy Objects are added into the object directory. Typically, they are Data of GGIO logical nodes: SPCSOxx, DPCSOxx, ISCSOxx. The Data Attributes of those Data are ctlVal, q and t. The control model associated to those Data is status-only. They are not controllable from an IEC61850 client, and their function is only to enable the GOOSE subscribing. What is the type of the attribute actVal in the BCR (Binary Counter Reading) CDC? The type is integer 32 (INT32). SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 27 Applications 1.15 TISSUES 1.15 TISSUES Topic Object Directory Object Model Services Reporting 28 TISSUE -No. Link Description Impact of Interoper. 433 http://www.tissue.iec61850.com/ tissue.mspx?issueid=433 Order of attributes in specialized CDCs for control service mapping - 422 http://www.tissue.iec61850.com/ tissue.mspx?issueid=422 Order of extension data objects and data attributes - 168 http://www.tissue.iec61850.com/ tissue.mspx?issueid=168 Order of attributes in MMS components - 120 http://www.tissue.iec61850.com/ tissue.mspx?issueid=120 Type - Mod.stVal and Mod.ctlVal - 146 http://www.tissue.iec61850.com/ tissue.mspx?issueid=146 CtxInt - 173 http://www.tissue.iec61850.com/ tissue.mspx?issueid=173 Ctl modelling harmonization - 234 http://www.tissue.iec61850.com/ tissue.mspx?issueid=234 New type CtxInt x 377 http://www.tissue.iec61850.com/ tissue.mspx?issueid=377 DeleteDataSet response- - 276 http://www.tissue.iec61850.com/ tissue.mspx?issueid=276 File Services Negative Responses - 183 http://www.tissue.iec61850.com/ tissue.mspx?issueid=183 GetNameList error handling x 165 http://www.tissue.iec61850.com/ tissue.mspx?issueid=165 Improper Error Response for GetDataSetValues x 116 http://www.tissue.iec61850.com/ tissue.mspx?issueid=116 GetNameList with empty response? x 474 http://www.tissue.iec61850.com/ tissue.mspx?issueid=474 GI for URCB - 453 http://www.tissue.iec61850.com/ tissue.mspx?issueid=453 Reporting & Logging model revision x 438 http://www.tissue.iec61850.com/ tissue.mspx?issueid=438 EntryTime base should be GMT - 349 http://www.tissue.iec61850.com/ tissue.mspx?issueid=349 BRCB TimeOfEntry has two definitions x 348 http://www.tissue.iec61850.com/ tissue.mspx?issueid=348 URCB class and report x SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Applications 1.15 TISSUES Reporting Control Model 344 http://www.tissue.iec61850.com/ tissue.mspx?issueid=344 TimeOfEntry misspelled - 335 http://www.tissue.iec61850.com/ tissue.mspx?issueid=335 Clearing of Bufovfl x 332 http://www.tissue.iec61850.com/ tissue.mspx?issueid=332 Ambiguity in use of trigger options x 329 http://www.tissue.iec61850.com/ tissue.mspx?issueid=329 Reporting and BufOvl x 322 http://www.tissue.iec61850.com/ tissue.mspx?issueid=322 Write Configuration attribute of BRCBs 301 http://www.tissue.iec61850.com/ tissue.mspx?issueid=301 SqNum in Buffered Reports - 300 http://www.tissue.iec61850.com/ tissue.mspx?issueid=300 Attribute Resv in BRCB x 298 http://www.tissue.iec61850.com/ tissue.mspx?issueid=298 Type of SqNum x 297 http://www.tissue.iec61850.com/ tissue.mspx?issueid=297 Sequence number x 278 http://www.tissue.iec61850.com/ tissue.mspx?issueid=278 EntryId not valid for a server x 275 http://www.tissue.iec61850.com/ tissue.mspx?issueid=275 Confusing statement on GI usage x 191 http://www.tissue.iec61850.com/ tissue.mspx?issueid=191 BRCB: Integrity and buffering reports x 190 http://www.tissue.iec61850.com/ tissue.mspx?issueid=190 BRCB: EntryId and TimeOfEntry x 177 http://www.tissue.iec61850.com/ tissue.mspx?issueid=177 Ignoring OptFlds bits for URCB - 52 http://www.tissue.iec61850.com/ tissue.mspx?issueid=52 Ambiguity GOOSE SqNum x 49 http://www.tissue.iec61850.com/ tissue.mspx?issueid=49 BRCB TimeOfEntry? x 46 http://www.tissue.iec61850.com/ tissue.mspx?issueid=46 Synchro check cancel x 44 http://www.tissue.iec61850.com/ tissue.mspx?issueid=44 AddCause - Object not sel x 30 http://www.tissue.iec61850.com/ tissue.mspx?issueid=30 control parameter T x SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 29 Applications 1.15 TISSUES 30 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Basics 2 Contents This chapter contains general information about the effects of device configuration on Logical Nodes and DOIs. 2.1 General 32 2.2 Effects of Configuration to the Logical Nodes 34 2.3 Allocation of Logical Nodes to Logical Devices 54 2.4 Logical Node LLN0 58 2.5 The DOI Behavior 60 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 31 Basics 2.1 General 2.1 General The protocol IEC 61850 was developed to define a standard that can be internationally employed for the transmission of power automation system data. This cross national standard enables an interoperability between automation systems and devices made by different manufacturers. The devices and high voltage bay control units of the SIPROTEC 4 series can be equipped with an Ethernet module EN100 via which the protocol IEC 61850 is interpreted. The configuration of the protocol and the integration of the device with redundant IEC 61850 interfaces in your network are performed via the configuration system DIGSI. For details please refer to the manuals: SIPROTEC 4 Ethernet Module EN 100 IEC 61850 Electrical/optical Interface 100 MBit, Manual /1/ and SIPROTEC 4 System Description /2/. Note The following definitions are taken mainly from standard IEC 61850, Technical Specification IEC TS 61850-2. Logical Devices LD Logical Devices represent a functional structuring of the LN Logical Nodes of a SIPROTEC device. The following Logical Devices are present: Logical Device Protection PROT Logical Device Measurement MEAS Logical Device Disturbance Recorder DR Logical Device Control CTRL Logical Device Extended EXT Each LD contains LN LLN0 and LN LPHD1. The allocation of the Logical Nodes to the Logical Devices is listed in Chapter 2.3. 32 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Basics 2.1 General Logical Node LN Smallest part of a function that exchanges data. A logical node is an object defined by its data and methods. Data object instance DOI A Data object is part of a logical node object representing specific information for example status of measurement. From an object-oriented point of view, a data object is an instance of a data class. Specific data classes carry the semantic within a logical node. Data attribute instance DAI A Data attribute defines the name (semantic), format, range of possible values, and representation of values while being communicated. Annunciation types via GOOSE Generic Object Oriented Substation Event A GOOSE report enables high speed trip signals to be issued with a high probability of delivery. The following types of information can be configured via GOOSE. External single point indication O/O External single point indication I/O External double point indication External double point indication, fast External operational measured values External metered values SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 33 Basics 2.2 Effects of Configuration to the Logical Nodes 2.2 Effects of Configuration to the Logical Nodes 2.2.1 Function parameters general Depending on the configuration of the function parameters the functions of the SIPROTEC are enabled or disabled. If a function is disabled, the corresponding Logical Node is not available. The following Logical Nodes are always available: 34 Logical Device Protection: LLN0, LPHD1, PTRC1 Logical Device Measurement: LLN0, LPHD1, MMXU1, MMTR1, MSQI1 Logical Device Disturbance Recorder: LLN0, LPHD1 Logical Device Control: LLN0, LPHD1, CALH1 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Basics 2.2 Effects of Configuration to the Logical Nodes 2.2.2 Function parameters SIPROTEC 7SA6 The following table shows which Logical Nodes are available when setting the corresponding function parameter. The setting (-) implies that no corresponding LN is available. Table 2-1 SIPROTEC 7SA6 - Effects of Function parameters to the Logical Nodes No. Funktion 103 Setting Group Change Option 110 114 Logical Nodes No effect Disturbance Recorder - RDRE1 Trip mode 3pole only XCBR1 1-/3pole XCBR2, XCBR3, XCBR4 Disabled - Z< (quadrilat.) PDIS1 - PDIS5, PTRC2 I> (overcurr.) - U/I - U/I/ - Distance protection pickup program 115 Characteristic of distance zones 120 Power Swing detection 121 Setting Teleprotection for Distance protection SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 No effect Disabled - Enabled RPSB1 - RPSB6 Disabled - PUTT (Z1B) PSCH1 PUTT (Pickup) PSCH1 POTT PSCH1 Dir.Comp.Pickup PSCH1 Unblocking PSCH1 Blocking PSCH1 Rev. Interlock PSCH1 Pilot wire comp PSCH1 35 Basics 2.2 Effects of Configuration to the Logical Nodes Table 2-1 SIPROTEC 7SA6 - Effects of Function parameters to the Logical Nodes (Cont.) No. Funktion 122 DTT Direct Transfer Trip No effect 124 Instantaneous HighSpeed SOTF Overcurrent No effect 125 Weak Infeed (Trip and/or Echo) No effect 126 Backup overcurrent 130 131 132 36 Sensitive Earth Flt.(comp/ isol. starp.) Earth fault overcurrent Teleprotection for Earth fault overcurrent Setting Logical Nodes Disabled - TOC IEC PTOC1 - PTOC3 TOC IEC /w 3ST PTOC1- PTOC4 TOC ANSI PTOC1- PTOC4 Disabled - Enabled PSDE1 Disabled - TOC IEC PTOC5 - PTOC8 TOC ANSI PTOC5 - PTOC8 TOC Logarithm. PTOC5 - PTOC8 Definite Time PTOC5 - PTOC7 U0 invers PTOC5 - PTOC8 Sr inverse PTOC5 - PTOC8 No effect SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Basics 2.2 Effects of Configuration to the Logical Nodes Table 2-1 SIPROTEC 7SA6 - Effects of Function parameters to the Logical Nodes (Cont.) No. Funktion Setting Logical Nodes 133 Auto-Reclose Function Disabled - 1 AR-cycle RREC1 2 AR-cycles RREC1 3 AR-cycles RREC1 4 AR-cycles RREC1 5 AR-cycles RREC1 6 AR-cycles RREC1 7 AR-cycles RREC1 8 AR-cycles RREC1 ADT RREC1 134 Auto-Reclose control mode 135 Synchronism and Voltage Check 136 137 138 Over / Underfrequency Protection Under / Overvoltage Protection Fault Locator SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 No effect Disabled - Enabled RSYN1 Disabled - Enabled PTOF1 - PTOF4, PTUF1 - PTUF4 Disabled - Enabled PTUV1 - PTUV6, PTOV1 - PTOV10 Enabl. w. comp. PTUV1 -PTUV6, PTOV1 - PTOV10 Disabled - Enabled RFLO1 with BCD-output RFLO1 37 Basics 2.2 Effects of Configuration to the Logical Nodes Table 2-1 SIPROTEC 7SA6 - Effects of Function parameters to the Logical Nodes (Cont.) No. Funktion Setting Logical Nodes 139 Breaker Failure Protection Disabled - Enabled RBRF1 enabled w/ 3I0> RBRF1 Disabled - 1 Trip Circuit XCBR1.CirSpv XCBR4.CirSpv 2 Trip Circuits XCBR1.CirSpv XCBR4.CirSpv 3 Trip Circuits XCBR1.CirSpv XCBR4.CirSpv Disabled - Enabled PTTR1 Disabled - Enabled MMXU2 - MMXU4 2 relays, Protection Interface 1 disabled - 2 relays, Protection Interface 1 enabled MMXU2, MMXU3 3 relays MMXU2, MMXU3, MMXU4 140 142 145 147 Trip Circuit Supervision Thermal overload protection Protection Interface 1 (Port D) Number of relays 150 Analog Output B1 (Port B) No effect 151 Analog Output B2 (Port B) No effect 152 Analog Output D1 (Port D) No effect 153 Analog Output D2 (Port D) No effect 38 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Basics 2.2 Effects of Configuration to the Logical Nodes 2.2.3 Function parameters SIPROTEC 7SA522 The following table shows which Logical Nodes are available when setting the corresponding function parameter. The setting (-) implies that no corresponding LN is available. Table 2-2 SIPROTEC 7SA522 - Effects of Function parameters to the Logical Nodes No. Funktion 103 Setting Group Change Option 110 112 113 120 121 Setting Logical Nodes No effect Disturbance Recorder - RDRE1 Trip mode 3pole only XCBR1 1-/3pole XCBR2, XCBR3, XCBR4 Disabled - Quadrilateral PDIS1 - PDIS5, PTRC2 MHO PDIS1 - PDIS5, PTRC2 Disabled - Quadrilateral PDIS1 - PDIS5, PTRC2 MHO PDIS1 - PDIS5, PTRC2 Disabled - Enabled RPSB1 - RPSB6 Disabled - PUTT (Z1B) PSCH1 POTT PSCH1 Unblocking PSCH1 Blocking PSCH1 SIGNALv.ProtInt PSCH1 Phase Distance Earth Distance Power Swing detection Teleprotection for Distance protection 122 DTT Direct Transfer Trip No effect 124 Instantaneous HighSpeed SOTF Overcurrent No effect SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 39 Basics 2.2 Effects of Configuration to the Logical Nodes Table 2-2 SIPROTEC 7SA522 - Effects of Function parameters to the Logical Nodes (Cont.) No. Funktion 125 Weak Infeed (Trip and/or Echo) 126 Backup overcurrent 131 Earth fault overcurrent 132 Teleprotection for Earth fault overcurrent 133 Auto-Reclose Function 134 40 Auto-Reclose control mode Setting Logical Nodes No effect Disabled - TOC IEC PTOC1 - PTOC3 TOC IEC /w 3ST PTOC1 - PTOC4 TOC ANSI PTOC1 - PTOC4 Disabled - TOC IEC PTOC5 - PTOC8 TOC ANSI PTOC5 - PTOC8 TOC Logarithm. PTOC5 - PTOC8 Definite Time PTOC5 - PTOC7 U0 invers PTOC5 - PTOC8 Sr inverse PTOC5 - PTOC8 No effect Disabled - 1 AR-cycle RREC1 2 AR-cycles RREC1 3 AR-cycles RREC1 4 AR-cycles RREC1 5 AR-cycles RREC1 6 AR-cycles RREC1 7 AR-cycles RREC1 8 AR-cycles RREC1 ADT RREC1 No effect SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Basics 2.2 Effects of Configuration to the Logical Nodes Table 2-2 SIPROTEC 7SA522 - Effects of Function parameters to the Logical Nodes (Cont.) No. Funktion Setting Logical Nodes 135 Synchronism and Voltage Check Disabled - Enabled RSYN1 Disabled - Enabled PTOF1 - PTOF4, PTUF1 - PTUF4 Disabled - Enabled PTUV1 - PTUV6, PTOV1 - PTOV10 Enabl. w. comp. PTUV1 -PTUV6, PTOV1 - PTOV10 Disabled - Enabled RFLO1 with BCD-output RFLO1 Disabled - Enabled RBRF1 enabled w/ 3I0> RBRF1 Disabled - 1 Trip Circuit XCBR1.CirSpv XCBR4.CirSpv 2 Trip Circuits XCBR1.CirSpv XCBR4.CirSpv 3 Trip Circuits XCBR1.CirSpv XCBR4.CirSpv Disabled (Prot. Interf. 2 disabled) - Disabled (Prot. Interf. 2 enabled) MMXU2 - MMXU4 Enabled MMXU2 - MMXU4 136 137 138 139 140 145 Over / Underfrequency Protection Under / Overvoltage Protection Fault Locator Breaker Failure Protection Trip Circuit Supervision Protection Interface 1 (Port D) SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 41 Basics 2.2 Effects of Configuration to the Logical Nodes Table 2-2 SIPROTEC 7SA522 - Effects of Function parameters to the Logical Nodes (Cont.) No. Funktion Setting Logical Nodes 146 Protection Interface 2 (Port E) Disabled (Prot. Interf. 1 disabled) - Disabled (Prot. Interf. 1 enabled) MMXU2 - MMXU4 Enabled MMXU2 - MMXU4 2 relays, no Protection Interface - 2 relays, min. 1 Protection Interface MMXU2, MMXU3 3 relays MMXU2, MMXU3, MMXU4 147 42 Number of relays SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Basics 2.2 Effects of Configuration to the Logical Nodes 2.2.4 Function parameters SIPROTEC 7SD5 The following table shows which Logical Nodes are available when setting the corresponding function parameter. The setting (-) implies that no corresponding LN is available. Table 2-3 SIPROTEC 7SD5 - Effects of Function parameters to the Logical Nodes No. Funktion 103 Setting Group Change Option 110 112 115 116 Setting Logical Nodes No effect Disturbance Recorder - RDRE1 Trip mode 3pole only XCBR1 1-/3pole XCBR2, XCBR3, XCBR4 Disabled - Enabled PDIF1, PDIF2, PTRC3 Disabled - Quadrilateral PDIS1 - PDIS5, PTRC2 MHO PDIS1 - PDIS5, PTRC2 Disabled - Quadrilateral PDIS1 - PDIS5, PTRC2 MHO PDIS1 - PDIS5, PTRC2 Differential protection Phase Distance Earth Distance 117 Distance protection pickup program 120 Power Swing detection SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 No effect Disabled - Enabled RPSB1 - RPSB6, RPSB10 43 Basics 2.2 Effects of Configuration to the Logical Nodes Table 2-3 SIPROTEC 7SD5 - Effects of Function parameters to the Logical Nodes (Cont.) No. Funktion Setting Logical Nodes 121 Teleprotection for Distance protection Disabled - PUTT (Z1B) PSCH1 PUTT (Pickup) PSCH1 POTT PSCH1 Dir.Comp.Pickup PSCH1 Unblocking PSCH1 Blocking PSCH1 Rev. Interlock PSCH1 Pilot wire comp PSCH1 122 DTT Direct Transfer Trip No effect 124 Instantaneous HighSpeed SOTF Overcurrent No effect 125 Weak Infeed (Trip and/or Echo) No effect 126 Backup overcurrent 131 132 44 Earth fault overcurrent Teleprotection for Earth fault overcurrent Disabled - TOC IEC PTOC1 - PTOC4, PTOC9, PTOC10 TOC ANSI PTOC1 - PTOC4, PTOC9, PTOC10 Disabled - TOC IEC PTOC5 - PTOC8 TOC ANSI PTOC5 - PTOC8 TOC Logarithm. PTOC5 - PTOC8 Definite Time PTOC5 - PTOC7 U0 invers PTOC5 - PTOC8 Sr inverse PTOC5 - PTOC8 No effect SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Basics 2.2 Effects of Configuration to the Logical Nodes Table 2-3 SIPROTEC 7SD5 - Effects of Function parameters to the Logical Nodes (Cont.) No. Funktion Setting Logical Nodes 133 Auto-Reclose Function Disabled - 1 AR-cycle RREC1 2 AR-cycles RREC1 3 AR-cycles RREC1 4 AR-cycles RREC1 5 AR-cycles RREC1 6 AR-cycles RREC1 7 AR-cycles RREC1 8 AR-cycles RREC1 ADT RREC1 134 Auto-Reclose control mode 135 Synchronism and Voltage Check 136 137 138 Over / Underfrequency Protection Under / Overvoltage Protection Fault Locator SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 No effect Disabled - Enabled RSYN1 Disabled - Enabled PTOF1 - PTOF4, PTUF1 - PTUF4 Disabled - Enabled PTUV1 - PTUV6, PTOV1 - PTOV10 Enabl. w. comp. PTUV1 -PTUV6, PTOV1 - PTOV10 Disabled - Enabled RFLO1 with BCD-output RFLO1 45 Basics 2.2 Effects of Configuration to the Logical Nodes Table 2-3 SIPROTEC 7SD5 - Effects of Function parameters to the Logical Nodes (Cont.) No. Funktion Setting Logical Nodes 139 Breaker Failure Protection Disabled - Enabled RBRF1 enabled w/ 3I0> RBRF1 Disabled - 1 Trip Circuit XCBR1.CirSpv XCBR4.CirSpv 2 Trip Circuits XCBR1.CirSpv XCBR4.CirSpv 3 Trip Circuits XCBR1.CirSpv XCBR4.CirSpv Disabled - Enabled PDIF3 Disabled - Enabled PTTR1 140 141 142 Trip Circuit Supervision Restricted earth fault protection Thermal overload protection 143 Transformer inside protection zone No effect 144 Voltage transformers No effect 145 Protection Interface 1 (Port D) 146 46 Protection Interface 2 (Port E) Disabled (Prot. Interf. 2 disabled) - Disabled (Prot. Interf. 2 enabled) MMXU2 - MMXU7 Enabled MMXU2 - MMXU7 Disabled (Prot. Interf. 1 disabled) - Disabled (Prot. Interf. 1 enabled) MMXU2 - MMXU7 Enabled MMXU2 - MMXU7 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Basics 2.2 Effects of Configuration to the Logical Nodes Table 2-3 SIPROTEC 7SD5 - Effects of Function parameters to the Logical Nodes (Cont.) No. Funktion Setting Logical Nodes 147 Number of relays 2 relays, no Protection Interface - 2 relays, min. 1 Protection Interface MMXU2, MMXU3 3 relays MMXU2, MMXU3, MMXU4 4 relays MMXU2, MMXU3, MMXU4, MMXU5 5 relays MMXU2, MMXU3, MMXU4, MMXU5, MMXU6 6 relays MMXU2, MMXU3, MMXU4 MMXU5, MMXU6, MMXU7 148 GPS synchronization No effect 149 Charging current compensation No effect 160 Line sections for fault locator No effect SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 47 Basics 2.2 Effects of Configuration to the Logical Nodes 2.2.5 Function parameters SIPROTEC 7SD610 The following table shows which Logical Nodes are available when setting the corresponding function parameter. The setting (-) implies that no corresponding LN is available. Table 2-4 SIPROTEC 7SD610 - Effects of Function parameters to the Logical Nodes No. Funktion 103 Setting Group Change Option 110 112 Setting Logical Nodes No effect Disturbance Recorder - RDRE1 Trip mode 3pole only XCBR1 1-/3pole XCBR2, XCBR3, XCBR4 Disabled - Enabled PDIF1, PDIF2, PTRC3 Differential protection 122 DTT Direct Transfer Trip No effect 124 Instantaneous HighSpeed SOTF Overcurrent No effect 126 Backup overcurrent 48 Disabled - TOC IEC PTOC1 - PTOC4, PTOC9, PTOC10 TOC ANSI PTOC1 - PTOC4, PTOC9, PTOC10 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Basics 2.2 Effects of Configuration to the Logical Nodes Table 2-4 SIPROTEC 7SD610 - Effects of Function parameters to the Logical Nodes (Cont.) No. Funktion Setting Logical Nodes 133 Auto-Reclose Function Disabled - 1 AR-cycle RREC1 2 AR-cycles RREC1 3 AR-cycles RREC1 4 AR-cycles RREC1 5 AR-cycles RREC1 6 AR-cycles RREC1 7 AR-cycles RREC1 8 AR-cycles RREC1 ADT RREC1 134 Auto-Reclose control mode 136 Over / Underfrequency Protection 137 139 Under / Overvoltage Protection Breaker Failure Protection SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 No effect Disabled - Enabled PTOF1 - PTOF4, PTUF1 - PTUF4 Disabled - Enabled PTUV1 - PTUV6, PTOV1 - PTOV10 Enabl. w. comp. PTUV1 -PTUV6, PTOV1 - PTOV10 Disabled - Enabled RBRF1 enabled w/ 3I0> RBRF1 49 Basics 2.2 Effects of Configuration to the Logical Nodes Table 2-4 SIPROTEC 7SD610 - Effects of Function parameters to the Logical Nodes (Cont.) No. Funktion Setting Logical Nodes 140 Trip Circuit Supervision Disabled - 1 Trip Circuit XCBR1.CirSpv XCBR4.CirSpv 2 Trip Circuits XCBR1.CirSpv XCBR4.CirSpv 3 Trip Circuits XCBR1.CirSpv XCBR4.CirSpv Disabled - Enabled PDIF3 Disabled - Enabled PTTR1 141 142 Restricted earth fault protection Thermal overload protection 143 Transformer inside protection zone No effect 144 Voltage transformers No effect 148 GPS synchronization No effect - Protection Interface (Port D) MMXU2, MMXU3 50 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Basics 2.2 Effects of Configuration to the Logical Nodes 2.2.6 Function parameters SIPROTEC 7VK61 The following table shows which Logical Nodes are available when setting the corresponding function parameter. The setting (-) implies that no corresponding LN is available. Table 2-5 SIPROTEC 7VK61 - Effects of Function parameters to the Logical Nodes No. Funktion 103 Setting Group Change Option 106 107 110 126 Setting Logical Nodes No effect Disturbance Recorder - RDRE1 Voltage transformer connection 3phase - 1phase - No LN RSYN1, PTUV1 - PTUV6, PTOV1 - PTOV10 not available Current transformer connection Trip mode Backup overcurrent SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Yes No LN PTOC1 - PTOC4 not available 3pole only XCBR1 1-/3pole XCBR2, XCBR3, XCBR4 Disabled - TOC IEC PTOC1 - PTOC3 TOC IEC /w 3ST PTOC1 - PTOC4 TOC ANSI PTOC1 - PTOC4 51 Basics 2.2 Effects of Configuration to the Logical Nodes Table 2-5 SIPROTEC 7VK61 - Effects of Function parameters to the Logical Nodes (Cont.) No. Funktion Setting Logical Nodes 133 Auto-Reclose Function Disabled - 1 AR-cycle RREC1 2 AR-cycles RREC1 3 AR-cycles RREC1 4 AR-cycles RREC1 5 AR-cycles RREC1 6 AR-cycles RREC1 7 AR-cycles RREC1 8 AR-cycles RREC1 ADT RREC1 134 Auto-Reclose control mode 135 Synchronism and Voltage Check 137 139 140 52 Under / Overvoltage Protection Breaker Failure Protection Trip Circuit Supervision No effect Disabled - Enabled RSYN1 Disabled - Enabled PTUV1 - PTUV6, PTOV1 - PTOV10 Disabled - Enabled RBRF1 enabled w/ 3I0> RBRF1 Disabled - 1 Trip Circuit XCBR1.CirSpv XCBR4.CirSpv 2 Trip Circuits XCBR1.CirSpv XCBR4.CirSpv 3 Trip Circuits XCBR1.CirSpv XCBR4.CirSpv SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Basics 2.2 Effects of Configuration to the Logical Nodes SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 53 Basics 2.3 Allocation of Logical Nodes to Logical Devices 2.3 Allocation of Logical Nodes to Logical Devices All Logical Nodes (LN) are allocated to Logical Devices (LD). The following tables show this allocation and the DOIs available for each LN. LD PROT The Logical Device PROT (protection) contains the following LNs: Table 2-6 LD PROT - Logical Nodes LN Function DOI LLN0 General Mod, Beh, Health, NamPlt PTRC1 General device pickup Total OFF Mod, Beh, Health, NamPlt, Str,Tr,FinTr PDIF1 PDIF2 Differential protection Mod, Beh, Health, NamPlt, Str, Op PTRC3 Differential protection General messages Mod, Beh, Health, NamPlt, Str, Op StrA, StrAG, StrB, StrBG, StrC, StrCG, StrAB, StrBC, StrCA, StrABC, StrABG, StrBCG, StrCAG, StrABCG PDIF3 Earth fault overcurrent Mod, Beh, Health, NamPlt, Str, Op, DifAClc, RstA PDIS1 PDIS10 Distance protection zone 1, zone 1B Mod, Beh, Health, NamPlt, Str, Op StrAG, StrBG, StrCG, StrAB, StrBC, StrCA PDIS2 PDIS3 PDIS4 PDIS5 Distance protection zone 2, zone3, zone 4, zone 5 Mod, Beh, Health, NamPlt, Str, Op PTRC2 Distance protection General messages Mod, Beh, Health, NamPlt, Str, Op PSCH1 Distance protection Teleprotection Mod, Beh, Health, NamPlt, Str, Op, CarRx, ProRx, LosOfGrd, Echo, WeiOp, RvABlk, GrdRx, ProTx RPSB1 RPSB2 RPSB3 RPSB4 RPSB5 RPSB1 Power Swing detection zone1, zone 2, zone3, zone 4, zone 5, zone 1B Mod, Beh, Health, NamPlt, Str, BlkZn RPSB6 Power Swing detection Power Swing trip Mod, Beh, Health, NamPlt, Op 54 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Basics 2.3 Allocation of Logical Nodes to Logical Devices Table 2-6 LD PROT - Logical Nodes (Cont.) LN Function DOI PTOC5 PTOC6 PTOC7 PTOC8 Earth fault overcurrent Mod, Beh, Health, NamPlt, Str, Op PTOC1 PTOC2 PTOC3 PTOC4 Backup overcurrent Mod, Beh, Health, NamPlt, Str, Op PTOC9 PTOC10 Backup overcurrent directional Mod, Beh, Health, NamPlt, Str, Op RSYN1 Synchronism and Voltage Check Mod, Beh, Health, NamPlt, Rel, VInd, AngInd, HzInd, SynPrg, DifVClc, DifHzClc, DifAngClc PTUV1 PTUV2 PTUV3 PTUV4 PTUV5 PTUV6 Undervoltage Protection Mod, Beh, Health, NamPlt, Str, Op PTOV1 PTOV2 PTOV3 PTOV4 PTOV5 PTOV6 PTOV7 PTOV8 PTOV9 PTOV10 Overvoltage Protection Mod, Beh, Health, NamPlt, Str, Op PTUF1 PTUF2 PTUF3 PTUF4 Underfrequency Protection Mod, Beh, Health, NamPlt, Str, Op PTOF1 PTOF2 PTOF3 PTOF4 Overfrequency Protection Mod, Beh, Health, NamPlt, Str, Op RFLO1 Fault Locator Mod, Beh, Health, NamPlt, FltZ, FltDiskm RBRF1 Breaker Failure Protection Mod, Beh, Health, NamPlt, Str, OpEx, OpIn PTTR1 Thermal overload protection Mod, Beh, Health, NamPlt, Str, Op, AlmThm SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 55 Basics 2.3 Allocation of Logical Nodes to Logical Devices Table 2-6 LD PROT - Logical Nodes (Cont.) LN Function DOI XCBR1 Three-pole tripping Mod, Beh, Health, NamPlt, Loc, OpCnt, Pos BlkOpn, BlkCls, CBOpCap SumSwARs1, SumSwARs2, SumSwARs3 XCBR2 XCBR3 XCBR4 Single-pole / Three-pole tripping Mod, Beh, Health, NamPlt, Loc, OpCnt, Pos BlkOpn, BlkCls, CBOpCap, SumSwARs LPHD1 Device PhyNam, PhyHealth, Proxy only SIPROTEC 7VK61 RREC1 Auto-Reclose Function Mod, Beh, Health, NamPlt, Op, AutoRecSt LD MEAS The Logical Device MEAS (measurement) contains the following LNs: Table 2-7 LD MEAS - Logical Nodes LN Function DOIs LLN0 General Mod, Beh, Health, NamPlt MMXU1 Operational measured values Mod, Beh, Health, NamPlt, TotW, TotVAr, TotVA, TotPF, Hz, PPV, PhV, A MMXU2 Measure relay 1 Mod, Beh, Health, NamPlt, Relld, A, PhV, MMXU3 Measure relay 2 Mod, Beh, Health, NamPlt, Relld, A, PhV, MMXU4 Measure relay 3 Mod, Beh, Health, NamPlt, Relld, A, PhV, MMXU5 Measure relay 4 Mod, Beh, Health, NamPlt, Relld, A, PhV, MMXU6 Measure relay 5 Mod, Beh, Health, NamPlt, Relld, A, PhV, MMXU7 Measure relay 6 Mod, Beh, Health, NamPlt, Relld, A, PhV, MMTR1 Energy Mod, Beh, Health, NamPlt, SupWh, SupVArh, DmdWh, DmdVArh MSQI1 Measured values, symmetrical components Mod, Beh, Health, NamPlt, SeqA, SeqV LPHD1 Device PhyNam, PhyHealth Proxy, CtrlNum, DevStr 56 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Basics 2.3 Allocation of Logical Nodes to Logical Devices LD DR The Logical Device DR (Disturbance Recorder) contains the following LNs: Table 2-8 LD DR - Logical Nodes LN Function DOIs LLN0 General Mod, Beh, Health, NamPlt RDRE1 Fault Record Mod, Beh, Health, NamPlt, RcdMade, FltNum, GriFltNum, RcdStr LPHD1 Device PhyNam, PhyHealth, Proxy LD CTRL The Logical Device CTRL (Control) contains the following LNs: Table 2-9 LD CTRL - Logical Nodes LN Function DOIs LLN0 General Mod, Beh, Health, NamPlt, LEDRs, Loc RREC1* Auto-Reclose Function Mod, Beh, Health, NamPlt, Op, AutoRecSt CALH1 Alarms, warning messages and group alarms Mod, Beh, Health, NamPlt, GrAlm, GrWrn, ErrBoard1, ErrBoard2, ErrBoard3, ErrBoard4, ErrBoard5, ErrBoard6, ErrBoard7 LPHD1 Device PhyNam, PhyHealth, Proxy * SIPROTEC 7VK61: RREC1 Part of Logical Device Protection (see Table 2-6 ) The Logical Nodes of the switching (and userdefined) objects will be created by DIGSI during the parameterization of your SIPROTEC device. MICS, Model Implementation Conformance Statement, shows the assignment of the DOIs; you can use DIGSI to print the MICS. LD EXT The Logical Device EXT (Extended) contains the following LNs: Table 2-10 LD EXT - Logical Nodes LN Function DOIs LLN0 General Mod, Beh, Health, NamPlt LPHD1 Device PhyNam, PhyHealth, Proxy SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 57 Basics 2.4 Logical Node LLN0 2.4 Logical Node LLN0 2.4.1 Logical Device PROT LLN0.Mod No. 52 Information At Least 1 Protection Funct. is Active (ProtActive) 0 0 1 1 1 1 Test mode (Test mode) 0 x 0 1 0 1 Stop data transmission (DataStop) 0 x 1 0 0 1 LLN0.Mod.stVal device annunciation / setting: 5 5 2 3 1 4 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF LLN0.Beh No. 52 Information At Least 1 Protection Funct. is Active (ProtActive) 0 1 1 1 1 Test mode (Test mode) x 0 0 1 1 Stop data transmission (DataStop) x 0 1 0 1 LLN0.Beh.stVal device annunciation / setting: 58 5 1 2 3 4 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Beh.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Basics 2.4 Logical Node LLN0 2.4.2 Logical Devices MEAS, CTRL, DR and EXT LLN0.Mod No. Information 51 Device is Operational and Protecting (Device OK) 0 0 1 1 1 1 Test mode (Test mode) 0 x 0 1 0 1 Stop data transmission (DataStop) 0 x 1 0 0 1 LLN0.Mod.stVal device annunciation / setting: 5 5 2 3 1 4 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF LLN0.Beh No. Information 51 Device is Operational and Protecting (Device OK) 0 1 1 1 1 Test mode (Test mode) x 0 0 1 1 Stop data transmission (DataStop) x 0 1 0 1 LLN0.Beh.stVal device annunciation / setting: 5 1 2 3 4 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Beh.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF 59 Basics 2.5 The DOI Behavior 2.5 The DOI Behavior 2.5.1 Logical Device PROT For the Logical Nodes of the PROT Logical Device, LNx.Beh.stVal is formed from LNx.Mod.stVal of the Logical Node and the status of the following device messages: Test mode (Test mode), Stop data transmission and At Least 1 Protection Funct. is Active. No. 52 Information At Least 1 Protection Funct. is Active (ProtActive) x 1 1 1 1 1 1 0 Test mode (Test mode) x 0 1 0 1 0 1 x Stop data transmission (DataStop) x 0 0 1 1 x x x LNx .Mod.stVal 5 1 1 1 1 2 2 x 5 1 3 2 4 2 4 5 LNx.Beh.stVal device annunciation / setting: 60 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Basics 2.5 The DOI Behavior 2.5.2 Logical Devices MEAS, CTRL, DR and EXT For the Logical Nodes of the MEAS, CTRL, DR and EXT Logical Devices, LNx.Beh.stVal is formed from LNx.Mod.stVal of the Logical Node and the status of the following device messages: Test mode (Test mode), Stop data transmission. No. Information Test mode (Test mode) x 0 1 0 1 0 1 Stop data transmission (DataStop) x 0 0 1 1 x x LNx .Mod.stVal 5 1 1 1 1 2 2 5 1 3 2 4 2 4 LNx.Beh.stVal device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF 61 Basics 2.5 The DOI Behavior 62 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3 Contents This chapter shows the mapping of the information relevant to the device on the Logical Node of protocol IEC61850. It is structured according to function. In Chapter 2 you can find the available functions of the different devices and what consequences non-configured functions have on the Logical Nodes. You find also general information about IEC 61850 mapping of information. 3.1 Differential Protection (PDIFx, PTRCx) 64 3.2 Distance Protection (PDISx, PTRC2) 74 3.3 Power swing detection (RPSBx) 103 3.4 Teleprotection for distance protection (PSCH1) 116 3.5 Earth fault overcurrent protection in earthed systems (PTOCx) 123 3.6 Earth fault detection in non-earthed systems (PSDE1) 131 3.7 Restricted earth fault protection (PDIF3) 135 3.8 Overcurrent protection (PTOCx) 137 3.9 Automatic reclosure function (RREC1) 147 3.10 Synchronism and voltage check (RSYN1) 149 3.11 Under and overvoltage protection (PTUVx, PTOVx) 152 3.12 Frequency protection (PTUFx, PTOFx) 176 3.13 Fault locator (RFLO1) 192 3.14 Circuit breaker failure protection (RBRF1) 194 3.15 Thermal overload protection (PTTR1) 196 3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx) 198 3.17 Tripping Logic of the Entire Device (PTRC1) 208 3.18 Device (LPHD1, CALH1) 212 3.19 Measurements (MMXUx, MSQI1, MMTR1) 216 3.20 Oscillographic Fault Records (RDRE1) 242 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 63 Mapping 3.1 Differential Protection (PDIFx, PTRCx) 3.1 Differential Protection (PDIFx, PTRCx) 3.1.1 I-DIFF> (PDIF1) PDIF1.Mod No. Information 3120 Diff: Active (Diff active) x 0 0 1 1 1 1 3148 Diff: Differential protection is blocked (Diff block) x 1 0 0 0 0 0 3149 Diff: Diff. protection is switched off (Diff OFF) 1 0 0 0 0 0 0 3190 Diff: Set Teststate of Diff. protection (Test Diff.) x x x 0 1 0 1 3191 Diff: Set Commissioning state of Diff. (Comm. Diff) x x x 0 0 1 1 PDIF1.Mod.stVal device annunciation / setting: 5 2 5 1 3 4 4 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PDIF1.Health No. 51 Information Device is Operational and Protecting (Device OK) PDIF1.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PDIF1.Str No. 3139 Information Diff: Fault detection of I-Diff> (I-Diff> Flt.) PDIF1.Str.general device annunciation: 64 0 1 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.1 Differential Protection (PDIFx, PTRCx) PDIF1.Op No. Information OFF-command IDiff> 0 1 PDIF1.Op.general device annunciation: 3.1.2 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE I-DIFF>> (PDIF2) PDIF2.Mod No. Information 3120 Diff: Active (Diff active) x 0 0 1 1 1 1 3148 Diff: Differential protection is blocked (Diff block) x 1 0 0 0 0 0 3149 Diff: Diff. protection is switched off (Diff OFF) 1 0 0 0 0 0 0 3190 Diff: Set Teststate of Diff. protection (Test Diff.) x x x 0 1 0 1 3191 Diff: Set Commissioning state of Diff. (Comm. Diff) x x x 0 0 1 1 PDIF2.Mod.stVal device annunciation / setting: 5 2 5 1 3 4 4 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PDIF2.Health No. 51 Information Device is Operational and Protecting (Device OK) PDIF2.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM 65 Mapping 3.1 Differential Protection (PDIFx, PTRCx) PDIF2.Str No. 3137 Information Diff: Fault detection of I-Diff>> (I-Diff>> Flt.) PDIF2.Str.general device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE PDIF2.Op No. Information OFF-command I-Diff>> 0 1 PDIF2.Op.general device annunciation: 66 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.1 Differential Protection (PDIFx, PTRCx) 3.1.3 Differencial Protection General Information PTRC3.Mod No. Information 3120 Diff: Active (Diff active) x 0 0 1 1 1 1 3148 Diff: Differential protection is blocked (Diff block) x 1 0 0 0 0 0 3149 Diff: Diff. protection is switched off (Diff OFF) 1 0 0 0 0 0 0 3190 Diff: Set Teststate of Diff. protection (Test Diff.) x 0 0 0 1 0 1 3191 Diff: Set Commissioning state of Diff. (Comm. Diff) x 0 0 0 0 1 1 PTRC3.Mod.stVal device annunciation / setting: 5 2 5 1 3 4 4 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTRC3.Health No. 51 Information Device is Operational and Protecting (Device OK) PTRC3.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTRC3.Str No. 3132 Information Diff: Fault detection (Diff. Gen. Flt.) PTRC3.Str.general device annunciation: 0 1 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Str.general: 0 - FALSE 1 - TRUE 67 Mapping 3.1 Differential Protection (PDIFx, PTRCx) PTRC3.Str.dirGeneral No. Information PTRC3.Str.dirGeneral device annunciation: 1 1 - ON 0 - OFF x - irrelevant IEC Status Str.dirGeneral: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH PTRC3.Str.phsA No. 3133 Information Diff: Fault detection in phase L1 (Diff. Flt. L1) PTRC3.Str.phsA device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsA: 0 - FALSE 1 - TRUE PTRC3.Str.dirPhsA No. Information PTRC3.Str.dirPhsA device annunciation: 1 1 - ON 0 - OFF x - irrelevant IEC Status Str.dirPhsA: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH PTRC3.Str.phsB No. 3134 Information Diff: Fault detection in phase L2 (Diff. Flt. L2 PTRC3.Str.phsB device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsB: 0 - FALSE 1 - TRUE PTRC3.Str.dirPhsB No. Information PTRC3.Str.dirPhsB device annunciation: 68 1 1 - ON 0 - OFF x - irrelevant IEC Status Str.dirPhsB: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.1 Differential Protection (PDIFx, PTRCx) PTRC3.Str.phsC No. 3135 Information Diff: Fault detection in phase L3 (Diff. Flt. L3) PTRC3.Str.phsC device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsC: 0 - FALSE 1 - TRUE PTRC3.Str.dirPhsC No. Information PTRC3.Str.dirPhsC device annunciation: 1 1 - ON 0 - OFF x - irrelevant IEC Status Str.dirPhsC: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH PTRC3.Str.neut No. 3136 Information Diff: Earth fault detection (Diff. Flt. E) PTRC3.Str.neut device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.neut: 0 - FALSE 1 - TRUE PTRC3.Str.dirNeut No. Information PTRC3.Str.dirNeut device annunciation: 1 1 - ON 0 - OFF x - irrelevant IEC Status Str.dirNeut: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH PTRC3.Op No. 3141 Information Diff: General TRIP (Diff. Gen. TRIP) PTRC3.Op.general device annunciation: 0 1 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 69 Mapping 3.1 Differential Protection (PDIFx, PTRCx) PTRC3.Op.phsA No. Information 3142 Diff: TRIP - Only L1 (Diff TRIP 1p L1) 1 0 0 3145 Diff: TRIP L123 (Diff TRIP L123) 0 1 0 PTRC3.Op.phsA device annunciation: 1 1 0 1 - ON 0 - OFF IEC Status Op.phsA: 0 - FALSE 1 - TRUE PTRC3.Op.phsB No. Information 3143 Diff: TRIP - Only L2 (Diff TRIP 1p L2) 1 0 0 3145 Diff: TRIP L123 (Diff TRIP L123) 0 1 0 PTRC3.Op.phsB device annunciation: 1 1 0 1 - ON 0 - OFF IEC Status Op.phsB: 0 - FALSE 1 - TRUE PTRC3.Op.phsC No. Information 3144 Diff: TRIP - Only L3 (Diff TRIP 1p L3) 1 0 0 3145 Diff: TRIP L123 (Diff TRIP L123) 0 1 0 PTRC3.Op.phsC device annunciation: 1 1 0 1 - ON 0 - OFF IEC Status Op.phsC: 0 - FALSE 1 - TRUE PTRC3.StrA No. 3176 Information Diff: Fault detection L1 (only) (Diff Flt. 1p.L1) PTRC3.StrA.stVal device annunciation: 70 1 0 1 0 1 - ON 0 - OFF IEC Status StrA.stVal: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.1 Differential Protection (PDIFx, PTRCx) PTRC3.StrAG No. 3177 Information Diff: Fault detection L1E (Diff Flt. L1E) PTRC3.StrAG.stVal device annunciation: 1 0 1 0 1 - ON 0 - OFF IEC Status StrAG.stVal: 0 - FALSE 1 - TRUE PTRC3.StrB No. 3178 Information Diff: Fault detection L2 (only) (Diff Flt. 1p.L2) PTRC3.StrB.stVal device annunciation: 1 0 1 0 1 - ON 0 - OFF IEC Status StrB.stVal: 0 - FALSE 1 - TRUE PTRC3.StrBG No. 3179 Information Diff: Fault detection L2E (Diff Flt. L2E) PTRC3.StrBG.stVal device annunciation: 1 0 1 0 1 - ON 0 - OFF IEC Status StrBG.stVal: 0 - FALSE 1 - TRUE PTRC3.StrC No. 3182 Information Diff: Fault detection L3 (only) (Diff Flt. 1p.L3) PTRC3.StrC.stVal device annunciation: 1 0 1 0 1 - ON 0 - OFF IEC Status StrC.stVal: 0 - FALSE 1 - TRUE PTRC3.StrCG No. 3183 Information Diff: Fault detection L3E (Diff Flt. L3E) PTRC3.StrCG.stVal device annunciation: 1 0 1 0 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status StrCG.stVal: 0 - FALSE 1 - TRUE 71 Mapping 3.1 Differential Protection (PDIFx, PTRCx) PTRC3.StrAB No. 3180 Information Diff: Fault detection L12 (Diff Flt. L12) PTRC3.StrAB.stVal device annunciation: 1 0 1 0 1 - ON 0 - OFF IEC Status StrAB.stVal: 0 - FALSE 1 - TRUE PTRC3.StrBC No. 3186 Information Diff: Fault detection L23 (Diff Flt. L23) PTRC3.StrBC.stVal device annunciation: 1 0 1 0 1 - ON 0 - OFF IEC Status StrBC.stVal: 0 - FALSE 1 - TRUE PTRC3.StrCA No. 3184 Information Diff: Fault detection L31 (Diff Flt. L31) PTRC3.StrCA.stVal device annunciation: 1 0 1 0 1 - ON 0 - OFF IEC Status StrCA.stVal: 0 - FALSE 1 - TRUE PTRC3.StrABC No. 3188 Information Diff: Fault detection L123 (Diff Flt. L123) PTRC3.StrABC.stVal device annunciation: 72 1 - ON 0 - OFF 1 0 1 0 IEC Status StrABC.stVal: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.1 Differential Protection (PDIFx, PTRCx) PTRC3.StrABG No. 3181 Information Diff: Fault detection L12E (Diff Flt. L12E PTRC3.StrABG.stVal device annunciation: 1 - ON 0 - OFF 1 0 1 0 IEC Status StrABG.stVal: 0 - FALSE 1 - TRUE PTRC3.StrBCG No. 3187 Information Diff: Fault detection L23E (Diff Flt. L23E) PTRC3.StrBCG.stVal device annunciation: 1 - ON 0 - OFF 1 0 1 0 IEC Status StrBCG.stVal: 0 - FALSE 1 - TRUE PTRC3.StrCAG No. 3185 Information Diff: Fault detection L31E (Diff Flt. L31E) PTRC3.StrCAG.stVal device annunciation: 1 - ON 0 - OFF 1 0 1 0 IEC Status StrCAG.stVal: 0 - FALSE 1 - TRUE PTRC3.StrABCG No. 3189 Information Diff: Fault detection L123E (Diff Flt. L123E) PTRC3.StrABCG.stVal device annunciation: 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 1 0 1 0 IEC Status StrABCG.stVal: 0 - FALSE 1 - TRUE 73 Mapping 3.2 Distance Protection (PDISx, PTRC2) 3.2 Distance Protection (PDISx, PTRC2) 3.2.1 Distance protection zone 1 (PDIS1) PDIS1.Mod No. Information 3653 Distance is ACTIVE (Dist. ACTIVE) 0 x x 1 1 1 1 3652 Distance is BLOCKED (Dist. BLOCK) x x x 0 0 1 1 3603 >BLOCK 21 Distance (>BLOCK 21 Dist.) x x x 0 1 0 1 3651 Distance is switched off (Dist. OFF) x 1 x 0 0 0 0 Op. mode Z1 (P1301) = Inactive x x 1 0 0 0 0 PDIS1.Mod.stVal device annunciation / setting: 5 5 5 1 2 2 2 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PDIS1.Health No. 51 3654 Information Device is Operational and Protecting (Device OK) Setting error K0(Z1) or Angle K0(Z1) (Dis.ErrorK0(Z1)) 1 0 1 0 PDIS1.Health.stVal device annunciation: 74 1 1 0 0 2 1 3 3 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.2 Distance Protection (PDISx, PTRC2) PDIS1.Str No. Information 3741 Distance Pickup Z1, Loop L1E (Dis. Z1 L1E) 0 1 x x x x x 3742 Distance Pickup Z1, Loop L2E (Dis. Z1 L2E) 0 x 1 x x x x 3743 Distance Pickup Z1, Loop L3E (Dis. Z1 L3E) 0 x x 1 x x x 3744 Distance Pickup Z1, Loop L12 (Dis. Z1 L12) 0 x x x 1 x x 3745 Distance Pickup Z1, Loop L23 (Dis. Z1 L23) 0 x x x x 1 x 3746 Distance Pickup Z1, Loop L31 (Dis. Z1 L31) 0 x x x x x 1 PDIS1.Str.general device annunciation: 0 1 1 1 1 1 1 1 - ON 0 - OFF x - irrelevant SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Str.general: 0 - FALSE 1 - TRUE 75 Mapping 3.2 Distance Protection (PDISx, PTRC2) PDIS1.Str.dirGeneral No. Information 3719 Distance Pickup FORWARD (Dis. forward) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3720 Distance Pickup REVERSE (Dis. reverse) 0 0 0 0 0 0 0 1 1 1 1 1 1 1 3741 Distance Pickup Z1, Loop L1E (Dis. Z1 L1E) 0 1 x x x x x 0 1 x x x x x 3742 Distance Pickup Z1, Loop L2E (Dis. Z1 L2E) 0 x 1 x x x x 0 x 1 x x x x 3743 Distance Pickup Z1, Loop L3E (Dis. Z1 L3E) 0 x x 1 x x x 0 x x 1 x x x 3744 Distance Pickup Z1, Loop L12 (Dis. Z1 L12) 0 x x x 1 x x 0 x x x 1 x x 3745 Distance Pickup Z1, Loop L23 (Dis. Z1 L23) 0 x x x x 1 x 0 x x x x 1 x 3746 Distance Pickup Z1, Loop L31 (Dis. Z1 L31) 0 x x x x x 1 0 x x x x x 1 PDIS1.Str.dirGeneral No. 0 0 0 0 0 0 0 0 2 2 2 2 2 2 Information 3719 Distance Pickup FORWARD (Dis. forward) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3720 Distance Pickup REVERSE (Dis. reverse) 0 0 0 0 0 0 0 1 1 1 1 1 1 1 3741 Distance Pickup Z1, Loop L1E (Dis. Z1 L1E) 0 1 x x x x x 0 1 x x x x x 3742 Distance Pickup Z1, Loop L2E (Dis. Z1 L2E) 0 x 1 x x x x 0 x 1 x x x x 3743 Distance Pickup Z1, Loop L3E (Dis. Z1 L3E) 0 x x 1 x x x 0 x x 1 x x x 3744 Distance Pickup Z1, Loop L12 (Dis. Z1 L12) 0 x x x 1 x x 0 x x x 1 x x 3745 Distance Pickup Z1, Loop L23 (Dis. Z1 L23) 0 x x x x 1 x 0 x x x x 1 x 3746 Distance Pickup Z1, Loop L31 (Dis. Z1 L31) 0 x x x x x 1 0 x x x x x 1 PDIS1.Str.dirGeneral device annunciation: 76 1 - ON 0 - OFF x - irrelevant 0 1 1 1 1 1 1 0 3 3 3 3 3 3 IEC Status Str.dirGeneral: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.2 Distance Protection (PDISx, PTRC2) PDIS1.Op No. Information 3811 Distance TRIP single-phase Z1 (Dis.TripZ1/1p) 0 1 x x 3823 DisTRIP 3phase in Z1 with single-ph Flt. (DisTRIP3p. Z1sf) 0 x 1 x 3824 DisTRIP 3phase in Z1 with multi-ph Flt. (DisTRIP3p. Z1mf) 0 x x 1 PDIS1.Op.general device annunciation: 0 1 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Op.general: 0 - FALSE 1 - TRUE PDIS1.Op.phsA No. Information 3811 Distance TRIP single-phase Z1 (Dis.TripZ1/1p) x 0 1 0 0 3823 DisTRIP 3phase in Z1 with single-ph Flt. (DisTRIP3p. Z1sf) x 0 0 1 0 3824 DisTRIP 3phase in Z1 with multi-ph Flt. (DisTRIP3p. Z1mf) x 0 0 0 1 3802 Distance TRIP command - Only Phase L1 (Dis.Trip 1pL1) 0 x 1 0 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 0 x 0 1 1 PDIS1.Op.phsA device annunciation: 0 0 1 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Op.phsA: 0 - FALSE 1 - TRUE PDIS1.Op.phsB No. Information 3811 Distance TRIP single-phase Z1 (Dis.TripZ1/1p) x 0 1 0 0 3823 DisTRIP 3phase in Z1 with single-ph Flt. (DisTRIP3p. Z1sf) x 0 0 1 0 3824 DisTRIP 3phase in Z1 with multi-ph Flt. (DisTRIP3p. Z1mf) x 0 0 0 1 3803 Distance TRIP command - Only Phase L2 (Dis.Trip 1pL2) 0 x 1 0 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 0 x 0 1 1 PDIS1.Op.phsB device annunciation: 0 0 1 1 1 1 - ON 0 - OFF x - irrelevant SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.phsB: 0 - FALSE 1 - TRUE 77 Mapping 3.2 Distance Protection (PDISx, PTRC2) PDIS1.Op.phsC No. Information 3811 Distance TRIP single-phase Z1 (Dis.TripZ1/1p) x 0 1 0 0 3823 DisTRIP 3phase in Z1 with single-ph Flt. (DisTRIP3p. Z1sf) x 0 0 1 0 3824 DisTRIP 3phase in Z1 with multi-ph Flt. (DisTRIP3p. Z1mf) x 0 0 0 1 3804 Distance TRIP command - Only Phase L3 (Dis.Trip 1pL3) 0 x 1 0 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 0 x 0 1 1 PDIS1.Op.phsC device annunciation: 0 0 1 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Op.phsC: 0 - FALSE 1 - TRUE PDIS1.StrAG No. 3741 Information Distance Pickup Z1, Loop L1E (Dis. Z1 L1E) PDIS1.StrAG.stVal device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status StrAG.stVal: 0 - FALSE 1 - TRUE PDIS1.StrBG No. 3742 Information Distance Pickup Z1, Loop L2E (Dis. Z1 L2E) PDIS1.StrBG.stVal device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status StrBG.stVal: 0 - FALSE 1 - TRUE PDIS1.StrCG No. 3743 Information Distance Pickup Z1, Loop L3E (Dis. Z1 L3E) PDIS1.StrCG.stVal device annunciation: 78 1 - ON 0 - OFF IEC Status StrCG.stVal: 0 1 0 1 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.2 Distance Protection (PDISx, PTRC2) PDIS1.StrAB No. 3744 Information Distance Pickup Z1, Loop L12 (Dis. Z1 L12) PDIS1.StrAB.stVal device annunciation: 1 - ON 0 - OFF IEC Status StrAB.stVal: 0 1 0 1 0 - FALSE 1 - TRUE PDIS1.StrBC No. 3745 Information Distance Pickup Z1, Loop L23 (Dis. Z1 L23) PDIS1.StrBC.stVal device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status StrBC.stVal: 0 - FALSE 1 - TRUE PDIS1.StrCA No. 3746 Information Distance Pickup Z1, Loop L31 (Dis. Z1 L31) PDIS1.StrCA.stVal device annunciation: 0 1 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status StrCA.stVal: 0 - FALSE 1 - TRUE 79 Mapping 3.2 Distance Protection (PDISx, PTRC2) 3.2.2 Distance protection zone 1B (PDIS10) PDIS10.Mod No. Information 3653 Distance is ACTIVE (Dist. ACTIVE) 0 x x 1 1 1 1 3652 Distance is BLOCKED (Dist. BLOCK) x x x 0 0 1 1 3603 >BLOCK 21 Distance (>BLOCK 21 Dist.) x x x 0 1 0 1 3651 Distance is switched off (Dist. OFF) x 1 x 0 0 0 0 Op. mode Z1B (P1351) = Inactive x x 1 0 0 0 0 PDIS10.Mod.stVal 5 5 5 1 2 2 2 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PDIS10.Health No. 51 3655 Information Device is Operational and Protecting (Device OK) 1 1 0 0 Setting error K0(>Z1) or Angle K0(>Z1) (DisErrorK0(>Z1)) 1 0 1 0 PDIS10.Health.stVal device annunciation: 80 1 - ON 0 - OFF 2 1 3 3 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.2 Distance Protection (PDISx, PTRC2) PDIS10.Str No. Information 3747 Distance Pickup Z1B, Loop L1E (Dis. Z1B L1E) 0 1 x x x x x 3748 Distance Pickup Z1B, Loop L2E (Dis. Z1B L2E) 0 x 1 x x x x 3749 Distance Pickup Z1B, Loop L3E (Dis. Z1B L3E) 0 x x 1 x x x 3750 Distance Pickup Z1B, Loop L12 (Dis. Z1B L12) 0 x x x 1 x x 3751 Distance Pickup Z1B, Loop L23 (Dis. Z1B L23) 0 x x x x 1 x 3752 Distance Pickup Z1B, Loop L31 (Dis. Z1B L31) 0 x x x x x 1 0 1 1 1 1 1 1 PDIS10.Str.general device annunciation: 1 - ON 0 - OFF x - irrelevant SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Str.general: 0 - FALSE 1 - TRUE 81 Mapping 3.2 Distance Protection (PDISx, PTRC2) PDIS10.Str.dirGeneral No. Information 3719 Distance Pickup FORWARD (Dis. forward) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3720 Distance Pickup REVERSE (Dis. reverse) 0 0 0 0 0 0 0 1 1 1 1 1 1 1 3747 Distance Pickup Z1B, Loop L1E (Dis. Z1B L1E) 0 1 x x x x x 0 1 x x x x x 3748 Distance Pickup Z1B, Loop L2E (Dis. Z1B L2E) 0 x 1 x x x x 0 x 1 x x x x 3749 Distance Pickup Z1B, Loop L3E (Dis. Z1B L3E) 0 x x 1 x x x 0 x x 1 x x x 3750 Distance Pickup Z1B, Loop L12 (Dis. Z1B L12) 0 x x x 1 x x 0 x x x 1 x x 3751 Distance Pickup Z1B, Loop L23 (Dis. Z1B L23) 0 x x x x 1 x 0 x x x x 1 x 3752 Distance Pickup Z1B, Loop L31 (Dis. Z1B L31) 0 x x x x x 1 0 x x x x x 1 PDIS10.Str.dirGeneral No. 0 0 0 0 0 0 0 0 2 2 2 2 2 2 Information 3719 Distance Pickup FORWARD (Dis. forward) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3720 Distance Pickup REVERSE (Dis. reverse) 0 0 0 0 0 0 0 1 1 1 1 1 1 1 3747 Distance Pickup Z1B, Loop L1E (Dis. Z1B L1E) 0 1 x x x x x 0 1 x x x x x 3748 Distance Pickup Z1B, Loop L2E (Dis. Z1B L2E) 0 x 1 x x x x 0 x 1 x x x x 3749 Distance Pickup Z1B, Loop L3E (Dis. Z1B L3E) 0 x x 1 x x x 0 x x 1 x x x 3750 Distance Pickup Z1B, Loop L12 (Dis. Z1B L12) 0 x x x 1 x x 0 x x x 1 x x 3751 Distance Pickup Z1B, Loop L23 (Dis. Z1B L23) 0 x x x x 1 x 0 x x x x 1 x 3752 Distance Pickup Z1B, Loop L31 (Dis. Z1B L31) 0 x x x x x 1 0 x x x x x 1 PDIS10.Str.dirGeneral device annunciation: 82 0 1 1 1 1 1 1 0 3 3 3 3 3 3 1 - ON 0 - OFF x - irrelevant IEC Status Str.dirGeneral: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.2 Distance Protection (PDISx, PTRC2) PDIS10.Op No. Information 3813 Distance TRIP single-phase Z1B (Dis.TripZ1B1p) 0 1 x x 3825 DisTRIP 3phase in Z1B with single-ph Flt (DisTRIP3p.Z1Bsf) 0 x 1 x 3826 DisTRIP 3phase in Z1B with multi-ph Flt. (DisTRIP3p Z1Bmf) 0 x x 1 PDIS10.Op.general device annunciation: 0 1 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Op.general: 0 - FALSE 1 - TRUE PDIS10.Op.phsA No. Information 3813 Distance TRIP single-phase Z1B (Dis.TripZ1B1p) x 0 1 0 0 3825 DisTRIP 3phase in Z1B with single-ph Flt (DisTRIP3p.Z1Bsf) x 0 0 1 0 3826 DisTRIP 3phase in Z1B with multi-ph Flt. (DisTRIP3p Z1Bmf) x 0 0 0 1 3802 Distance TRIP command - Only Phase L1 (Dis.Trip 1pL1) 0 x 1 0 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 0 x 0 1 1 PDIS10.Op.phsA device annunciation: 0 0 1 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Op,phsA: 0 - FALSE 1 - TRUE PDIS10.Op.phsB No. Information 3813 Distance TRIP single-phase Z1B (Dis.TripZ1B1p) x 0 1 0 0 3825 DisTRIP 3phase in Z1B with single-ph Flt (DisTRIP3p.Z1Bsf) x 0 0 1 0 3826 DisTRIP 3phase in Z1B with multi-ph Flt. (DisTRIP3p Z1Bmf) x 0 0 0 1 3803 Distance TRIP command - Only Phase L2 (Dis.Trip 1pL2) 0 x 1 0 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 0 x 0 1 1 PDIS10.Op.phsB device annunciation: 0 0 1 1 1 1 - ON 0 - OFF x - irrelevant SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op,phsB: 0 - FALSE 1 - TRUE 83 Mapping 3.2 Distance Protection (PDISx, PTRC2) PDIS10.Op.phsC No. Information 3813 Distance TRIP single-phase Z1B (Dis.TripZ1B1p) x 0 1 0 0 3825 DisTRIP 3phase in Z1B with single-ph Flt (DisTRIP3p.Z1Bsf) x 0 0 1 0 3826 DisTRIP 3phase in Z1B with multi-ph Flt. (DisTRIP3p Z1Bmf) x 0 0 0 1 3804 Distance TRIP command - Only Phase L3 (Dis.Trip 1pL3) 0 x 1 0 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 0 x 0 1 1 PDIS10.Op.phsC device annunciation: 0 0 1 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Op,phsC: 0 - FALSE 1 - TRUE PDIS10.StrAG No. 3741 Information Distance Pickup Z1, Loop L1E (Dis. Z1 L1E) PDIS10.StrAG.stVal device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status StrAG.stVal: 0 - FALSE 1 - TRUE PDIS10.StrBG No. 3742 Information Distance Pickup Z1, Loop L2E (Dis. Z1 L2E) PDIS10.StrBG.stVal device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status StrBG.stVal: 0 - FALSE 1 - TRUE PDIS10.StrCG No. 3743 Information Distance Pickup Z1, Loop L3E (Dis. Z1 L3E) PDIS10.StrCG.stVal device annunciation: 84 0 1 0 1 1 - ON 0 - OFF IEC Status StrCG.stVal: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.2 Distance Protection (PDISx, PTRC2) PDIS10.StrAB No. 3744 Information Distance Pickup Z1, Loop L12 (Dis. Z1 L12) PDIS10.StrAB.stVal device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status StrAB.stVal: 0 - FALSE 1 - TRUE PDIS10.StrBC No. 3745 Information Distance Pickup Z1, Loop L23 (Dis. Z1 L23) PDIS10.StrBC.stVal device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status StrBC.stVal: 0 - FALSE 1 - TRUE PDIS10.StrCA No. 3746 Information Distance Pickup Z1, Loop L31 (Dis. Z1 L31) PDIS10.StrCA.stVal device annunciation: 0 1 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status StrCA.stVal: 0 - FALSE 1 - TRUE 85 Mapping 3.2 Distance Protection (PDISx, PTRC2) 3.2.3 Distance protection zone 2 (PDIS2) PDIS2.Mod No. Information 3653 Distance is ACTIVE (Dist. ACTIVE) 0 x x 1 1 1 1 3652 Distance is BLOCKED (Dist. BLOCK) x x x 0 0 1 1 3603 >BLOCK 21 Distance (>BLOCK 21 Dist.) x x x 0 1 0 1 3651 Distance is switched off (Dist. OFF) x 1 x 0 0 0 0 Op. mode Z2 (P1311) = Inactive x x 1 0 0 0 0 PDIS2.Mod.stVal device annunciation / setting: 5 5 5 1 2 2 2 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PDIS2.Health No. 51 3655 Information Device is Operational and Protecting (Device OK) 1 1 0 0 Setting error K0(>Z1) or Angle K0(>Z1) (DisErrorK0(>Z1)) 1 0 1 0 PDIS2.Health.stVal device annunciation: 2 1 3 3 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PDIS2.Str No. 3755 Information Distance Pickup Z2 (Dis. Pickup Z2) PDIS2.Str.general device annunciation: 86 0 1 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.2 Distance Protection (PDISx, PTRC2) PDIS2.Str.dirGeneral No. Information 3719 Distance Pickup FORWARD (Dis. forward) x 0 0 1 1 3720 Distance Pickup REVERSE (Dis. reverse) x 0 1 0 1 3755 Distance Pickup Z2 (Dis. Pickup Z2) 0 1 1 1 1 PDIS2.Str.dirGeneral device annunciation: 0 0 2 1 3 1 - ON 0 - OFF IEC Status Str.dirGeneral: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH PDIS2.Op No. Information 3816 Distance TRIP single-phase Z2 (Dis.TripZ2/1p) 0 0 1 1 3817 Distance TRIP 3phase in Z2 (Dis.TripZ2/3p) 0 1 0 1 PDIS2.Op.general device annunciation: 0 1 1 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE PDIS2.Op.phsA No. Information 3816 Distance TRIP single-phase Z2 (Dis.TripZ2/1p) 0 x 1 0 3817 Distance TRIP 3phase in Z2 (Dis.TripZ2/3p) 0 x 0 1 3802 Distance TRIP command - Only Phase L1 (Dis.Trip 1pL1) x 0 1 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1 PDIS2.Op.phsA device annunciation: 0 0 1 1 1 - ON 0 - OFF x - irrelevant SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.phsA: 0 - FALSE 1 - TRUE 87 Mapping 3.2 Distance Protection (PDISx, PTRC2) PDIS2.Op.phsB No. Information 3816 Distance TRIP single-phase Z2 (Dis.TripZ2/1p) 0 x 1 0 3817 Distance TRIP 3phase in Z2 (Dis.TripZ2/3p) 0 x 0 1 3803 Distance TRIP command - Only Phase L2 (Dis.Trip 1pL2) x 0 1 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1 PDIS2.Op.phsB device annunciation: 0 0 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Op.phsB: 0 - FALSE 1 - TRUE PDIS2.Op.phsC No. Information 3816 Distance TRIP single-phase Z2 (Dis.TripZ2/1p) 0 x 1 0 3817 Distance TRIP 3phase in Z2 (Dis.TripZ2/3p) 0 x 0 1 3804 Distance TRIP command - Only Phase L3 (Dis.Trip 1pL3) x 0 1 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1 PDIS2.Op.phsC device annunciation: 88 0 0 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Op.phsC: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.2 Distance Protection (PDISx, PTRC2) 3.2.4 Distance protection zone 3 (PDIS3) PDIS3.Mod No. Information 3653 Distance is ACTIVE (Dist. ACTIVE) 0 x x 1 1 1 1 3652 Distance is BLOCKED (Dist. BLOCK) x x x 0 0 1 1 3603 >BLOCK 21 Distance (>BLOCK 21 Dist.) x x x 0 1 0 1 3651 Distance is switched off (Dist. OFF) x 1 x 0 0 0 0 Op. mode Z3 (P1321) = Inactive x x 1 0 0 0 0 PDIS3.Mod.stVal device annunciation / setting: 5 5 5 1 2 2 2 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PDIS3.Health No. 51 3655 Information Device is Operational and Protecting (Device OK) 1 1 0 0 Setting error K0(>Z1) or Angle K0(>Z1) (DisErrorK0(>Z1)) 1 0 1 0 PDIS3.Health.stVal device annunciation: 2 1 3 3 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM 89 Mapping 3.2 Distance Protection (PDISx, PTRC2) PDIS3.Str No. 3758 Information Distance Pickup Z3 (Dis. Pickup Z3) PDIS3.Str.general device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE PDIS3.Str.dirGeneral No. Information 3719 Distance Pickup FORWARD (Dis. forward) x 0 0 1 1 3720 Distance Pickup REVERSE (Dis. reverse) x 0 1 0 1 3758 Distance Pickup Z3 (Dis. Pickup Z3) 0 1 1 1 1 PDIS3.Str.dirGeneral device annunciation: 0 0 2 1 3 1 - ON 0 - OFF IEC Status Str.dirGeneral: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH PDIS3.Op No. 3818 Information Distance TRIP 3phase in Z3 (Dis.TripZ3/T3) PDIS3.Op.general device annunciation: 90 0 1 0 1 1 - ON 0 - OFF x - irrelevant IEC Status Op.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.2 Distance Protection (PDISx, PTRC2) PDIS3.Op.phsA No. Information 3818 Distance TRIP 3phase in Z3 (Dis.TripZ3/T3) 0 1 1 1 3802 Distance TRIP command - Only Phase L1 (Dis.Trip 1pL1) x 0 1 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1 PDIS3.Op.phsA device annunciation: 0 0 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Op.phsA: 0 - FALSE 1 - TRUE PDIS3.Op.phsB No. Information 3818 Distance TRIP 3phase in Z3 (Dis.TripZ3/T3) 0 1 1 1 3803 Distance TRIP command - Only Phase L2 (Dis.Trip 1pL2) x 0 1 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1 PDIS3.Op.phsB device annunciation: 0 0 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Op.phsB: 0 - FALSE 1 - TRUE PDIS3.Op.phsC No. Information 3818 Distance TRIP 3phase in Z3 (Dis.TripZ3/T3) 0 1 1 1 3804 Distance TRIP command - Only Phase L3 (Dis.Trip 1pL3) x 0 1 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1 PDIS3.Op.phsC device annunciation: 0 0 1 1 1 - ON 0 - OFF x - irrelevant SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.phsC: 0 - FALSE 1 - TRUE 91 Mapping 3.2 Distance Protection (PDISx, PTRC2) 3.2.5 Distance protection zone 4 (PDIS4) PDIS4.Mod No. Information 3653 Distance is ACTIVE (Dist. ACTIVE) 0 x x 1 1 1 1 3652 Distance is BLOCKED (Dist. BLOCK) x x x 0 0 1 1 3603 >BLOCK 21 Distance (>BLOCK 21 Dist.) x x x 0 1 0 1 3651 Distance is switched off (Dist. OFF) x 1 x 0 0 0 0 Op. mode Z4 (P1331) = Inactive x x 1 0 0 0 0 PDIS4.Mod.stVal device annunciation / setting: 5 5 5 1 2 2 2 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PDIS4.Health No. 51 3655 Information Device is Operational and Protecting (Device OK) 1 1 0 0 Setting error K0(>Z1) or Angle K0(>Z1) (DisErrorK0(>Z1)) 1 0 1 0 PDIS4.Health.stVal device annunciation: 2 1 3 3 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PDIS4.Str No. Information 3759 Distance Pickup Z4 (Dis. Pickup Z4) 0 1 PDIS4.Str.general device annunciation: 92 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.2 Distance Protection (PDISx, PTRC2) PDIS4.Str.dirGeneral No. Information 3719 Distance Pickup FORWARD (Dis. forward) x 0 0 1 1 3720 Distance Pickup REVERSE (Dis. reverse) x 0 1 0 1 3759 Distance Pickup Z4 (Dis. Pickup Z4) 0 1 1 1 1 PDIS4.Str.dirGeneral device annunciation: 1 - ON 0 - OFF 0 0 2 1 3 IEC Status Str.dirGeneral: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH PDIS4.Op No. 3821 Information Distance TRIP 3phase in Z4 (Dis.TRIP 3p. Z4) PDIS4.Op.general device annunciation: 0 1 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 93 Mapping 3.2 Distance Protection (PDISx, PTRC2) PDIS4.Op.phsA No. Information 3821 Distance TRIP 3phase in Z4 (Dis.TRIP 3p. Z4) 0 1 1 1 3802 Distance TRIP command - Only Phase L1 (Dis.Trip 1pL1) x 0 1 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1 PDIS4.Op.phsA device annunciation: 0 0 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Op.phsA: 0 - FALSE 1 - TRUE PDIS4.Op.phsB No. Information 3821 Distance TRIP 3phase in Z4 (Dis.TRIP 3p. Z4) 0 1 1 1 3803 Distance TRIP command - Only Phase L2 (Dis.Trip 1pL2) x 0 1 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1 PDIS4.Op.phsB device annunciation: 0 0 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Op.phsB: 0 - FALSE 1 - TRUE PDIS4.Op.phsC No. Information 3821 Distance TRIP 3phase in Z4 (Dis.TRIP 3p. Z4) 0 1 1 1 3804 Distance TRIP command - Only Phase L3 (Dis.Trip 1pL3) x 0 1 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1 PDIS4.Op.phsC device annunciation: 94 0 0 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Op.phsC: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.2 Distance Protection (PDISx, PTRC2) 3.2.6 Distance protection zone 5 (PDIS5) PDIS5.Mod No. Information 3653 Distance is ACTIVE (Dist. ACTIVE) 0 x x 1 1 1 1 3652 Distance is BLOCKED (Dist. BLOCK) x x x 0 0 1 1 3603 >BLOCK 21 Distance (>BLOCK 21 Dist.) x x x 0 1 0 1 3651 Distance is switched off (Dist. OFF) x 1 x 0 0 0 0 Op. mode Z5 (P1341) = Inactive x x 1 0 0 0 0 PDIS5.Mod.stVal device annunciation / setting: 5 5 5 1 2 2 2 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PDIS5.Health No. 51 3655 Information Device is Operational and Protecting (Device OK) 1 1 0 0 Setting error K0(>Z1) or Angle K0(>Z1) (DisErrorK0(>Z1)) 1 0 1 0 PDIS5.Health.stVal device annunciation: 2 1 3 3 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PDIS5.Str No. Information 3760 Distance Pickup Z5 (Dis. Pickup Z5) 0 1 PDIS5.Str.general device annunciation: 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Str.general: 0 - FALSE 1 - TRUE 95 Mapping 3.2 Distance Protection (PDISx, PTRC2) PDIS5.Str.dirGeneral No. Information 3719 Distance Pickup FORWARD (Dis. forward) x 0 0 1 1 3720 Distance Pickup REVERSE (Dis. reverse) x 0 1 0 1 3760 Distance Pickup Z5 (Dis. Pickup Z5) 0 1 1 1 1 PDIS5.Str.dirGeneral device annunciation: 1 - ON 0 - OFF 0 0 2 1 3 IEC Status Str.dirGeneral: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH PDIS5.Op No. 3822 Information Distance TRIP 3phase in Z5 (Dis.TRIP 3p. Z5) PDIS5.Op.general device annunciation: 96 0 1 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.2 Distance Protection (PDISx, PTRC2) PDIS5.Op.phsA No. Information 3822 Distance TRIP 3phase in Z5 (Dis.TRIP 3p. Z5) 0 1 1 1 3802 Distance TRIP command - Only Phase L1 (Dis.Trip 1pL1) x 0 1 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1 PDIS5.Op.phsA device annunciation: 0 0 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Op.phsA: 0 - FALSE 1 - TRUE PDIS5.Op.phsB No. Information 3822 Distance TRIP 3phase in Z5 (Dis.TRIP 3p. Z5) 0 1 1 1 3803 Distance TRIP command - Only Phase L2 (Dis.Trip 1pL2) x 0 1 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1 PDIS5.Op.phsB device annunciation: 0 0 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Op.phsB: 0 - FALSE 1 - TRUE PDIS5.Op.phsC No. Information 3822 Distance TRIP 3phase in Z5 (Dis.TRIP 3p. Z5) 0 1 1 1 3804 Distance TRIP command - Only Phase L3 (Dis.Trip 1pL3) x 0 1 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1 PDIS5.Op.phsC device annunciation: 0 0 1 1 1 - ON 0 - OFF x - irrelevant SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.phsC: 0 - FALSE 1 - TRUE 97 Mapping 3.2 Distance Protection (PDISx, PTRC2) 3.2.7 Distance protection general information (PTRC2) PTRC2.Mod No. Information 3653 Distance is ACTIVE (Dist. ACTIVE) 0 1 0 0 0 3652 Distance is BLOCKED (Dist. BLOCK) x 0 1 0 1 3603 >BLOCK 21 Distance (>BLOCK 21 Dist.) x 0 0 1 1 3651 Distance is switched off (Dist. OFF) 1 0 0 0 0 PTRC2.Mod.stVal device annunciation: 5 1 2 2 2 1 - ON 0 - OFF x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTRC2.Health No. Information 3654 Setting error K0(Z1) or Angle K0(Z1) (Dis.ErrorK0(Z1)) x 0 1 0 1 3655 Setting error K0(>Z1) or Angle K0(>Z1) (DisErrorK0(>Z1)) x 0 0 1 1 Device is Operational and Protecting (Device OK) 0 1 1 1 1 51 PTRC2.Health.stVal device annunciation: 3 1 2 2 2 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTRC2.Str No. 3671 Information Distance PICKED UP (Dis. PICKUP) PTRC2.Str.general device annunciation: 98 0 1 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.2 Distance Protection (PDISx, PTRC2) PTRC2.Str.dirGeneral No. Information 3720 Distance Pickup REVERSE (Dis. reverse) 1 1 0 0 3719 Distance Pickup FORWARD (Dis. forward) 1 0 1 0 PTRC2.Str.dirGeneral device annunciation: 3 2 1 0 1 - ON 0 - OFF IEC Status Str.dirGeneral: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH PTRC2.Str.phsA No. 3672 Information Distance PICKUP L1 (Dis.Pickup L1) PTRC2.Str.phsA device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsA: 0 - FALSE 1 - TRUE PTRC2.Str.dirPhsA No. Information 3701 Distance Loop L1E selected forward (Dis.Loop L1-E f) 1 x x 0 0 0 1 1 x x x x 0 3704 Distance Loop L12 selected forward (Dis.Loop L1-2 f) x 1 x 0 0 0 x x 1 1 x x 0 3706 Distance Loop L31 selected forward (Dis.Loop L3-1 f) x x 1 0 0 0 x x x x 1 1 0 3707 Distance Loop L1E selected reverse (Dis.Loop L1-E r) 0 0 0 1 x x 0 0 1 x 1 x 0 3710 Distance Loop L12 selected reverse (Dis.Loop L1-2 r) 0 0 0 x 1 x 1 x 0 0 x 1 0 3712 Distance Loop L31 selected reverse (Dis.Loop L3-1 r) 0 0 0 x x 1 x 1 x 1 0 0 0 PTRC2.Str.dirPhsA device annunciation: 1 1 1 2 2 2 3 3 3 3 3 3 0 1 - ON 0 - OFF x - irrelevant SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Str.dirPhsA: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 99 Mapping 3.2 Distance Protection (PDISx, PTRC2) PTRC2.Str.phsB No. 3673 Information Distance PICKUP L2 (Dis.Pickup L2) PTRC2.Str.phsB device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsB: 0 - FALSE 1 - TRUE PTRC2.Str.dirPhsB No. Information 3702 Distance Loop L2E selected forward (Dis.Loop L2-E f) 1 x x 0 0 0 1 1 x x x x 0 3704 Distance Loop L12 selected forward (Dis.Loop L1-2 f) x 1 x 0 0 0 x x 1 1 x x 0 3705 Distance Loop L23 selected forward (Dis.Loop L2-3 f) x x 1 0 0 0 x x x x 1 1 0 3708 Distance Loop L2E selected reverse (Dis.Loop L2-E r) 0 0 0 1 x x 0 0 1 x 1 x 0 3710 Distance Loop L12 selected reverse (Dis.Loop L1-2 r) 0 0 0 x 1 x 1 x 0 0 x 1 0 3711 Distance Loop L23 selected reverse (Dis.Loop L2-3 r) 0 0 0 x x 1 x 1 x 1 0 0 0 PTRC2.Str.dirPhsB device annunciation: 100 1 1 1 2 2 2 3 3 3 3 3 3 0 1 - ON 0 - OFF x - irrelevant IEC Status Str.dirPhsB: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.2 Distance Protection (PDISx, PTRC2) PTRC2.Str.phsC No. 3674 Information Distance PICKUP L3 (Dis.Pickup L3) PTRC2.Str.phsC device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsC: 0 - FALSE 1 - TRUE PTRC2.Str.dirPhsC No. Information 3703 Distance Loop L3E selected forward (Dis.Loop L3-E f) 1 x x 0 0 0 1 1 x x x x 0 3705 Distance Loop L23 selected forward (Dis.Loop L2-3 f) x 1 x 0 0 0 x x 1 1 x x 0 3706 Distance Loop L31 selected forward (Dis.Loop L3-1 f) x x 1 0 0 0 x x x x 1 1 0 3709 Distance Loop L3E selected reverse (Dis.Loop L3-E r) 0 0 0 1 x x 0 0 1 x 1 x 0 3711 Distance Loop L23 selected reverse (Dis.Loop L2-3 r) 0 0 0 x 1 x 1 x 0 0 x 1 0 3712 Distance Loop L31 selected reverse (Dis.Loop L3-1 r) 0 0 0 x x 1 x 1 x 1 0 0 0 PTRC2.Str.dirPhsC 1 1 1 2 2 2 3 3 3 3 3 3 0 device annunciation: 1 - ON 0 - OFF x - irrelevant IEC Status Str.dirPhsC: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD PTRC2.Str.neut No. 3675 Information Distance PICKUP Earth (Dis.Pickup E) PTRC2.Str.neut device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.neut: 0 - FALSE 1 - TRUE PTRC2.Op No. 3801 Information Distance protection: General trip (Dis.Gen. Trip) PTRC2.Op.general device annunciation: 0 1 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 101 Mapping 3.2 Distance Protection (PDISx, PTRC2) PTRC2.Op.phsA No. Information 3802 Distance TRIP command - Only Phase L1 (Dis.Trip 1pL1) 1 0 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 0 1 0 PTRC2.Op.phsA device annunciation: 1 1 0 1 - ON 0 - OFF IEC Status Op.phsA: 0 - FALSE 1 - TRUE PTRC2.Op.phsB No. Information 3803 Distance TRIP command - Only Phase L2 (Dis.Trip 1pL2) 1 0 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 0 1 0 PTRC2.Op.phsB device annunciation: 1 1 0 1 - ON 0 - OFF IEC Status Op.phsB: 0 - FALSE 1 - TRUE PTRC2.Op.phsC No. Information 3804 Distance TRIP command - Only Phase L3 (Dis.Trip 1pL3) 1 0 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 0 1 0 PTRC2.Op.phsC device annunciation: 102 1 1 0 1 - ON 0 - OFF IEC Status Op.phsC: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.3 Power swing detection (RPSBx) 3.3 Power swing detection (RPSBx) 3.3.1 Power swing detection zone 1 (RPSB1) RPSB1.Mod No. Information 3651 Distance is switched off (Dist. OFF) x x 1 0 0 4160 >BLOCK Power Swing detection (>Pow. Swing BLK) x x x 0 1 Power Swing (P 120) = Enabled and Dis. PICKUP (P 114) = Z< (quadrilat.) 0 1 1 1 1 P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block x 1 x 0 0 RPSB1.Mod.stVal 5 5 5 1 2 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF RPSB1.Health No. 51 Information Device is Operational and Protecting (Device OK) RPSB1.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM RPSB1.Str No. 4164 Information Power Swing detected (Power Swing) 0 1 x P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block 0 0 1 RPSB1.Str.general device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Str.general: 0 - FALSE 1 - TRUE 103 Mapping 3.3 Power swing detection (RPSBx) RPSB1.Str.phsA No. Information 4167 Power Swing detected in L1 (Pow. Swing L1) 0 1 x P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block 0 0 1 RPSB1.Str.phsA device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.phsA: 0 - FALSE 1 - TRUE RPSB1.Str.phsB No. Information 4168 Power Swing detected in L2 (Pow. Swing L2) 0 1 x P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block 0 0 1 RPSB1.Str.phsB device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.phsB: 0 - FALSE 1 - TRUE RPSB1.Str.phsC No. Information 4169 Power Swing detected in L3 (Pow. Swing L3) 0 1 x P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block 0 0 1 RPSB1.Str.phsC device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.phsC: 0 - FALSE 1 - TRUE RPSB1.BlkZn No. Information 4164 Power Swing detected (Power Swing) 0 1 1 x 4166 Power Swing TRIP command (Pow. Swing TRIP) 0 0 1 x P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block 0 0 0 1 RPSB1.BlkZn.stVal device annunciation / setting: 104 0 1 0 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status BlkZn.stVal: 0 - NOT BLOCKED 1 - BLOCKED SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.3 Power swing detection (RPSBx) 3.3.2 Power swing detection zone 1B (RPSB10) RPSB10.Mod No. 4160 Information >BLOCK Power Swing detection (>Pow. Swing BLK) x 0 1 x Power Swing (P 120) = Enabled and Dis. PICKUP (P 114) = Z< (quadrilat.) 0 1 1 1 P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block x 0 0 1 RPSB10.Mod.stVal 5 1 2 5 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF RPSB10.Health No. 51 Information Device is Operational and Protecting (Device OK) RPSB10.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM RPSB10.Str No. 4164 Information Power Swing detected (Power Swing) 0 1 x P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block 0 0 1 RPSB1.Str.general device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Str.general: 0 - FALSE 1 - TRUE 105 Mapping 3.3 Power swing detection (RPSBx) RPSB10.Str.phsA No. 4167 Information Power Swing detected in L1 (Pow. Swing L1) 0 1 x P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block 0 0 1 RPSB10.Str.phsA device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.phsA: 0 - FALSE 1 - TRUE RPSB10.Str.phsB No. 4168 Information Power Swing detected in L2 (Pow. Swing L2) 0 1 x P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block 0 0 1 RPSB10.Str.phsB device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.phsB: 0 - FALSE 1 - TRUE RPSB10.Str.phsC No. 4169 Information Power Swing detected in L3 (Pow. Swing L3) 0 1 x P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block 0 0 1 RPSB10.Str.phsC device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.phsC: 0 - FALSE 1 - TRUE RPSB10.BlkZn No. Information 4164 Power Swing detected (Power Swing) 0 1 1 x 4166 Power Swing TRIP command (Pow. Swing TRIP) 0 0 1 x P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block 0 0 0 1 RPSB10.BlkZn.stVal device annunciation / setting: 106 0 1 0 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status BlkZn.stVal: 0 - NOT BLOCKED 1 - BLOCKED SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.3 Power swing detection (RPSBx) 3.3.3 Power swing detection zone 2 (RPSB2) RPSB2.Mod No. 4160 Information >BLOCK Power Swing detection (>Pow. Swing BLK) x 0 1 x Power Swing (P 120) = Enabled and Dis. PICKUP (P 114) = Z< (quadrilat.) 0 1 1 1 P/S Op. mode (P2002) = All zones block or Z1,Z1B,Z2 block or Z2 to Z5 block x 0 0 1 RPSB2.Mod.stVal 5 1 2 5 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF RPSB2.Health No. 51 Information Device is Operational and Protecting (Device OK) RPSB2.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM RPSB2.Str No. 4164 Information Power Swing detected (Power Swing) 0 1 x P/S Op. mode (P2002) = All zones block or Z1,Z1B,Z2 block or Z2 to Z5 block 0 0 1 RPSB1.Str.general device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Str.general: 0 - FALSE 1 - TRUE 107 Mapping 3.3 Power swing detection (RPSBx) RPSB2.Str.phsA No. 4167 Information Power Swing detected in L1 (Pow. Swing L1) 0 1 x P/S Op. mode (P2002) = All zones block or Z1,Z1B,Z2 block or Z2 to Z5 block 0 0 1 RPSB2.Str.phsA device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.phsA: 0 - FALSE 1 - TRUE RPSB2.Str.phsB No. 4168 Information Power Swing detected in L2 (Pow. Swing L2) 0 1 x P/S Op. mode (P2002) = All zones block or Z1,Z1B,Z2 block or Z2 to Z5 block 0 0 1 RPSB2.Str.phsB device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.phsB: 0 - FALSE 1 - TRUE RPSB2.Str.phsC No. 4169 Information Power Swing detected in L3 (Pow. Swing L3) 0 1 x P/S Op. mode (P2002) = All zones block or Z1,Z1B,Z2 block or Z2 to Z5 block 0 0 1 RPSB2.Str.phsC device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.phsC: 0 - FALSE 1 - TRUE RPSB2.BlkZn No. Information 4164 Power Swing detected (Power Swing) 0 1 1 x 4166 Power Swing TRIP command (Pow. Swing TRIP) 0 0 1 x P/S Op. mode (P2002) = All zones block or Z1,Z1B,Z2 block or Z2 to Z5 block 0 0 0 1 RPSB2.BlkZn.stVal device annunciation / setting: 108 0 1 0 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status BlkZn.stVal: 0 - NOT BLOCKED 1 - BLOCKED SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.3 Power swing detection (RPSBx) 3.3.4 Power swing detection zone 3 (RPSB3) RPSB3.Mod No. 4160 Information >BLOCK Power Swing detection (>Pow. Swing BLK) x 0 1 x Power Swing (P 120) = Enabled and Dis. PICKUP (P 114) = Z< (quadrilat.) 0 1 1 1 P/S Op. mode (P2002) = All zones block or Z2 to Z5 block x 0 0 1 RPSB3.Mod.stVal 5 1 2 5 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF RPSB3.Health No. 51 Information Device is Operational and Protecting (Device OK) RPSB3.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM RPSB3.Str No. 4164 Information Power Swing detected (Power Swing) 0 1 x P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1 RPSB1.Str.general device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Str.general: 0 - FALSE 1 - TRUE 109 Mapping 3.3 Power swing detection (RPSBx) RPSB3.Str.phsA No. 4167 Information Power Swing detected in L1 (Pow. Swing L1) 0 1 x P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1 RPSB3.Str.phsA device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.phsA: 0 - FALSE 1 - TRUE RPSB3.Str.phsB No. 4168 Information Power Swing detected in L2 (Pow. Swing L2) 0 1 x P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1 RPSB3.Str.phsB device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.phsB: 0 - FALSE 1 - TRUE RPSB3.Str.phsC No. 4169 Information Power Swing detected in L3 (Pow. Swing L3) 0 1 x P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1 RPSB3.Str.phsC device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.phsC: 0 - FALSE 1 - TRUE RPSB3.BlkZn No. Information 4164 Power Swing detected (Power Swing) 0 1 1 x 4166 Power Swing TRIP command (Pow. Swing TRIP) 0 0 1 x P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 0 1 RPSB3.BlkZn.stVal device annunciation / setting: 110 0 1 0 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status BlkZn.stVal: 0 - NOT BLOCKED 1 - BLOCKED SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.3 Power swing detection (RPSBx) 3.3.5 Power swing detection zone 4 (RPSB4) RPSB4.Mod No. 4160 Information >BLOCK Power Swing detection (>Pow. Swing BLK) x 0 1 x Power Swing (P 120) = Enabled and Dis. PICKUP (P 114) = Z< (quadrilat.) 0 1 1 1 P/S Op. mode (P2002) = All zones block or Z2 to Z5 block x 0 0 1 RPSB4.Mod.stVal 5 1 2 5 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF RPSB4.Health No. 51 Information Device is Operational and Protecting (Device OK) RPSB4.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM RPSB4.Str No. 4164 Information Power Swing detected (Power Swing) 0 1 x P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1 RPSB1.Str.general device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Str.general: 0 - FALSE 1 - TRUE 111 Mapping 3.3 Power swing detection (RPSBx) RPSB4.Str.phsA No. 4167 Information Power Swing detected in L1 (Pow. Swing L1) 0 1 x P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1 RPSB4.Str.phsA device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.phsA: 0 - FALSE 1 - TRUE RPSB4.Str.phsB No. 4168 Information Power Swing detected in L2 (Pow. Swing L2) 0 1 x P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1 RPSB4.Str.phsB device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.phsB: 0 - FALSE 1 - TRUE RPSB4.Str.phsC No. 4169 Information Power Swing detected in L3 (Pow. Swing L3) 0 1 x P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1 RPSB4.Str.phsC device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.phsC: 0 - FALSE 1 - TRUE RPSB4.BlkZn No. Information 4164 Power Swing detected (Power Swing) 0 1 1 x 4166 Power Swing TRIP command (Pow. Swing TRIP) 0 0 1 x P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 0 1 RPSB4.BlkZn.stVal device annunciation / setting: 112 0 1 0 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status BlkZn.stVal: 0 - NOT BLOCKED 1 - BLOCKED SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.3 Power swing detection (RPSBx) 3.3.6 Power swing detection zone 5 (RPSB5) RPSB5.Mod No. 4160 Information >BLOCK Power Swing detection (>Pow. Swing BLK) x 0 1 x Power Swing (P 120) = Enabled and Dis. PICKUP (P 114) = Z< (quadrilat.) 0 1 1 1 P/S Op. mode (P2002) = All zones block or Z2 to Z5 block x 0 0 1 RPSB5.Mod.stVal 5 1 2 5 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF RPSB5.Health No. 51 Information Device is Operational and Protecting (Device OK) RPSB5.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM RPSB5.Str No. 4164 Information Power Swing detected (Power Swing) 0 1 x P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1 RPSB1.Str.general device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Str.general: 0 - FALSE 1 - TRUE 113 Mapping 3.3 Power swing detection (RPSBx) RPSB5.Str.phsA No. 4167 Information Power Swing detected in L1 (Pow. Swing L1) 0 1 x P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1 RPSB5.Str.phsA device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.phsA: 0 - FALSE 1 - TRUE RPSB5.Str.phsB No. 4168 Information Power Swing detected in L2 (Pow. Swing L2) 0 1 x P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1 RPSB5.Str.phsB device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.phsB: 0 - FALSE 1 - TRUE RPSB5.Str.phsC No. 4169 Information Power Swing detected in L3 (Pow. Swing L3) 0 1 x P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1 RPSB5.Str.phsC device annunciation / setting: 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.phsC: 0 - FALSE 1 - TRUE RPSB5.BlkZn No. Information 4164 Power Swing detected (Power Swing) 0 1 1 x 4166 Power Swing TRIP command (Pow. Swing TRIP) 0 0 1 x P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 0 1 RPSB5.BlkZn.stVal device annunciation / setting: 114 0 1 0 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status BlkZn.stVal: 0 - NOT BLOCKED 1 - BLOCKED SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.3 Power swing detection (RPSBx) 3.3.7 Power swing trip command (RPSB6) RPSB6.Mod No. 4160 Information >BLOCK Power Swing detection (>Pow. Swing BLK) x 0 1 x Power Swing (P 120) = Enabled and Dis. PICKUP (P 114) = Z< (quadrilat.) 0 1 1 1 PowerSwing trip (P2006) = YES x 0 0 1 RPSB6.Mod.stVal 5 1 2 5 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF RPSB6.Health No. 51 Information Device is Operational and Protecting (Device OK) RPSB6.Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM RPSB6.Op No. 4166 Information Power Swing TRIP command (Pow. Swing TRIP) RPSB6.Op.general device annunciation: 0 1 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 115 Mapping 3.4 Teleprotection for distance protection (PSCH1) 3.4 Teleprotection for distance protection (PSCH1) PSCH1.Mod No. Information 4003 >Distance Teleprotection BLOCK (>Dis.Telep. Blk) 1 1 0 0 4052 Dis. Teleprotection is switched OFF (Dis.Telep. OFF) 1 0 1 0 PSCH1.Mod.stVal device annunciation: 5 2 5 1 1 - ON 0 - OFF IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PSCH1.Health No. 51 Information Device is Operational and Protecting (Device OK) 0 1 PSCH1.Health.stVal device annunciation: 1 - ON 0 - OFF 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PSCH1.ProTx No. Information 4057 Dis. Telep. Carrier SEND signal, L1 (Dis.T.SEND L1) 1 1 x x x 0 4058 Dis. Telep. Carrier SEND signal, L2 (Dis.T.SEND L2) 1 x 1 x x 0 4059 Dis. Telep. Carrier SEND signal, L3 (Dis.T.SEND L3) 1 x x 1 x 0 4056 Dis. Telep. Carrier SEND signal (Dis.T.SEND) 1 x x x 1 0 PSCH1.ProTx.stVal device annunciation: 116 1 1 1 1 1 0 1 - ON 0 - OFF x - irrelevant IEC Status ProTx.stVal: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.4 Teleprotection for distance protection (PSCH1) PSCH1.ProRx No. 4054 Information Dis. Telep. Carrier signal received (Dis.T.Carr.rec.) PSCH1.ProRx.stVal device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status ProRx.stVal: 0 - FALSE 1 - TRUE PSCH1.Str No. Information 4057 Dis. Telep. Carrier SEND signal, L1 (Dis.T.SEND L1) 1 1 x x x 0 4058 Dis. Telep. Carrier SEND signal, L2 (Dis.T.SEND L2) 1 x 1 x x 0 4059 Dis. Telep. Carrier SEND signal, L3 (Dis.T.SEND L3) 1 x x 1 x 0 4056 Dis. Telep. Carrier SEND signal (Dis.T.SEND) 1 x x x 1 0 PSCH1.Str.general device annunciation: 1 1 1 1 1 0 1 - ON 0 - OFF x - irrelevant IEC Status Str.general: 0 - FALSE 1 - TRUE PSCH1.Str.phsA No. 4057 Information Dis. Telep. Carrier SEND signal, L1 (Dis.T.SEND L1) PSCH1.Str.phsA device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsA: 0 - FALSE 1 - TRUE PSCH1.Str.phsB No. 4058 Information Dis. Telep. Carrier SEND signal, L2 (Dis.T.SEND L2) PSCH1.Str.phsB device annunciation: 0 1 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Str.phsB: 0 - FALSE 1 - TRUE 117 Mapping 3.4 Teleprotection for distance protection (PSCH1) PSCH1.Str.phsC No. 4059 Information Dis. Telep. Carrier SEND signal, L3 (Dis.T.SEND L3) 0 1 PSCH1.Str.phsC device annunciation: 0 1 1 - ON 0 - OFF IEC Status Str.phsC: 0 - FALSE 1 - TRUE PSCH1.Op No. Information 3850 DisTRIP Z1B with Teleprotection scheme (DisTRIP Z1B Tel) PSCH1.Op.general device annunciation: 118 0 1 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.4 Teleprotection for distance protection (PSCH1) PSCH1.Op.phsA No. Information 3850 DisTRIP Z1B with Teleprotection scheme (DisTRIP Z1B Tel) 1 1 1 0 0 0 3802 Distance TRIP command - Only Phase L1 (Dis.Trip 1pL1) 1 1 x 1 x 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 1 x 1 x 1 0 PSCH1.Op.phsA device annunciation: 1 1 1 0 0 0 1 - ON 0 - OFF x - irrelevant IEC Status Op.phsA: 0 - FALSE 1 - TRUE PSCH1.Op.phsB No. Information 3850 DisTRIP Z1B with Teleprotection scheme (DisTRIP Z1B Tel) 1 1 1 0 0 0 3803 Distance TRIP command - Only Phase L2 (Dis.Trip 1pL2) 1 1 x 1 x 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 1 x 1 x 1 0 PSCH1.Op.phsB device annunciation: 1 1 1 0 0 0 1 - ON 0 - OFF x - irrelevant IEC Status Op.phsB: 0 - FALSE 1 - TRUE PSCH1.Op.phsC No. Information 3850 DisTRIP Z1B with Teleprotection scheme (DisTRIP Z1B Tel) 1 1 1 0 0 0 3804 Distance TRIP command - Only Phase L3 (Dis.Trip 1pL3) 1 1 x 1 x 0 3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 1 x 1 x 1 0 PSCH1.Op.phsC device annunciation: 1 1 1 0 0 0 1 - ON 0 - OFF x - irrelevant SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status OP.phsC: 0 - FALSE 1 - TRUE 119 Mapping 3.4 Teleprotection for distance protection (PSCH1) PSCH1.CarRx No. Information 4030 >Dis.Tele. Unblocking: UNBLOCK Channel 1 (>Dis.T.UB ub 1) 1 1 x x x x 0 4035 >Dis.Tele. Unblocking: UNBLOCK Channel 2 (>Dis.T.UB ub 2) 1 x 1 x x x 0 4032 >Dis.Tele. Unblocking: UNBLOCK Ch. 1, L1 (>Dis.T.UB ub1L1) 1 x x 1 x x 0 4033 >Dis.Tele. Unblocking: UNBLOCK Ch. 1, L2 (>Dis.T.UB ub1L2) 1 x x x 1 x 0 4034 >Dis.Tele. Unblocking: UNBLOCK Ch. 1, L3 (>Dis.T.UB ub1L3) 1 x x x x 1 0 PSCH1.CarRx.general device annunciation: 1 - ON 0 - OFF x - irrelevant 1 1 1 1 1 1 0 IEC Status CarRx.general: 0 - FALSE 1 - TRUE PSCH1.LosOfGrd No. Information 4055 Dis. Telep. Carrier CHANNEL FAILURE (Dis.T.Carr.Fail) 1 x x 0 4080 Dis. Tele.Unblocking: FAILURE Channel 1 (Dis.T.UB Fail1) 1 1 x 0 4081 Dis. Tele.Unblocking: FAILURE Channel 2 (Dis.T.UB Fail2) 1 x 1 0 PSCH1.LosOfGrd.stVal device annunciation: 1 - ON 0 - OFF x - irrelevant 1 1 1 0 IEC Status LosOfGrd.stVal: 0 - FALSE 1 - TRUE PSCH1.Echo No. 4246 Information ECHO Send SIGNAL (ECHO SIGNAL) 0 1 PSCH1.Echo.stVal device annunciation: 120 0 1 1 - ON 0 - OFF IEC Status Echo.stVal: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.4 Teleprotection for distance protection (PSCH1) PSCH1.WeiOp.general No. 4241 Information Weak Infeed General TRIP command (WeakInfeed TRIP) PSCH1.WeiOp.general device annunciation: 1 - ON 0 - OFF 0 1 0 1 IEC Status WeiOp.general: 0 - FALSE 1 - TRUE PSCH1.WeiOp.phsA No. Information 4242 Weak Infeed TRIP command - Only L1 (Weak TRIP 1p.L1) 1 1 x 0 4245 Weak Infeed TRIP command L123 (Weak TRIP L123) 1 x 1 0 PSCH1.WeiOp.phsA device annunciation: 1 - ON 0 - OFF x - irrelevant 1 1 1 0 IEC Status WeiOp.phsA: 0 - FALSE 1 - TRUE PSCH1.WeiOp.phsB No. Information 4243 Weak Infeed TRIP command - Only L2 (Weak TRIP 1p.L2) 1 1 x 0 4245 Weak Infeed TRIP command L123 (Weak TRIP L123) 1 x 1 0 PSCH1.WeiOp.phsB device annunciation: 1 - ON 0 - OFF x - irrelevant 1 1 1 0 IEC Status WeiOp.phsB: 0 - FALSE 1 - TRUE PSCH1.WeiOp.phsC No. Information 4244 Weak Infeed TRIP command - Only L3 (Weak TRIP 1p.L3) 1 1 x 0 4245 Weak Infeed TRIP command L123 (Weak TRIP L123) 1 x 1 0 PSCH1.WeiOp.phsC device annunciation: 1 - ON 0 - OFF x - irrelevant SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 1 1 1 0 IEC Status WeiOp.phsC: 0 - FALSE 1 - TRUE 121 Mapping 3.4 Teleprotection for distance protection (PSCH1) PSCH1.RvABlk No. 4068 Information Dis. Telep. Transient Blocking (Dis.T.Trans.Blk) 0 1 PSCH1.RvABlk.stval device annunciation: 1 - ON 0 - OFF x - irrelevant 0 1 IEC Status RvABlk.stVal: 0 - FALSE 1 - TRUE PSCH1.GrdRx No. Information 4031 >Dis.Tele. Unblocking: BLOCK Channel 1 (>Dis.T.UB bl 1) 1 x 0 4036 >Dis.Tele. Unblocking: BLOCK Channel 2 (>Dis.T.UB bl 2) x 1 0 PSCH1.GrdRx.stVal device annunciation: 122 1 - ON 0 - OFF x - irrelevant 1 1 0 IEC Status GrdRx.stVal: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.5 Earth fault overcurrent protection in earthed systems (PTOCx) 3.5 Earth fault overcurrent protection in earthed systems (PTOCx) 3.5.1 Earth fault 3I0 > (PTOC5) PTOC5.Mod No. Information 1333 Earth fault protection is ACTIVE (E/F ACTIVE) x x 0 1 1 1 1 1332 Earth fault protection is BLOCKED (E/F BLOCK) x x x 0 1 1 0 1308 >Earth Fault O/C Block 3I0> (>EF BLOCK 3I0>) x x x 1 0 1 0 1331 Earth fault protection is switched OFF (E/F Prot. OFF) 1 x x 0 0 0 0 Op. mode 3I0> (P3130) = Inactive PTOC5.Mod.stVal x 1 x 0 0 0 0 5 5 5 2 2 2 1 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOC5.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOC5.Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTOC5.Str No. 1356 Information E/F 3I0> PICKED UP (EF 3I0> Pickup) PTOC5.Str.general device annunciation: 0 1 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Str.general: 0 - FALSE 1 - TRUE 123 Mapping 3.5 Earth fault overcurrent protection in earthed systems (PTOCx) PTOC5.Str.dirGeneral No. Information 1358 E/F picked up FORWARD (EF forward) x 1 1 0 0 1359 E/F picked up REVERSE (EF reverse) x 1 0 1 0 1356 E/F 3I0> PICKED UP (EF 3I0> Pickup) 0 1 1 1 1 PTOC5.Str.dirGeneral device annunciation: 1 - ON 0 - OFF 0 3 1 2 0 IEC Status Str.dirGeneral: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH PTOC5.Op No. 1368 Information E/F 3I0> TRIP (EF 3I0> TRIP) PTOC5.Op.general device annunciation: 124 0 1 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.5 Earth fault overcurrent protection in earthed systems (PTOCx) 3.5.2 Earth fault 3I0 >> (PTOC6) PTOC6.Mod No. Information 1333 Earth fault protection is ACTIVE (E/F ACTIVE) x x 0 1 1 1 1 1332 Earth fault protection is BLOCKED (E/F BLOCK) x x x 0 1 1 0 1307 >Earth Fault O/C Block 3I0>> (>EF BLOCK 3I0>>) x x x 1 0 1 0 1331 Earth fault protection is switched OFF (E/F Prot. OFF) 1 x x 0 0 0 0 Op. mode 3I0>> (P3120) = Inactive PTOC6.Mod.stVal x 1 x 0 0 0 0 5 5 5 2 2 2 1 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOC6.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOC6.Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTOC6.Str No. 1355 Information E/F 3I0>> PICKED UP (EF 3I0>> Pickup) PTOC6.Str.general device annunciation: 0 1 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Str.general: 0 - FALSE 1 - TRUE 125 Mapping 3.5 Earth fault overcurrent protection in earthed systems (PTOCx) PTOC6.Str.dirGeneral No. Information 1358 E/F picked up FORWARD (EF forward) x 1 1 0 0 1359 E/F picked up REVERSE (EF reverse) x 1 0 1 0 1355 E/F 3I0>> PICKED UP (EF 3I0>> Pickup) 0 1 1 1 1 PTOC6.Str.dirGeneral device annunciation: 1 - ON 0 - OFF 0 3 1 2 0 IEC Status Str.dirGeneral: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH PTOC6.Op No. Information 1367 E/F 3I0>> TRIP (EF 3I0>> TRIP) PTOC6.Op.general device annunciation: 126 0 1 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.5 Earth fault overcurrent protection in earthed systems (PTOCx) 3.5.3 Earth fault 3I0 >>> (PTOC7) PTOC7.Mod No. Information 1333 Earth fault protection is ACTIVE (E/F ACTIVE) x x 0 1 1 1 1 1332 Earth fault protection is BLOCKED (E/F BLOCK) x x x 0 1 1 0 1305 >Earth Fault O/C Block 3I0>>> (>EF BLK 3I0>>>) x x x 1 0 1 0 1331 Earth fault protection is switched OFF (E/F Prot. OFF) 1 x x 0 0 0 0 Op. mode 3I0>>> (P3110) = Inactive PTOC7.Mod.stVal x 1 x 0 0 0 0 5 5 5 2 2 2 1 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOC7.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOC7.Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTOC7.Str No. 1354 Information E/F 3I0>>> PICKED UP (EF 3I0>>>Pickup) PTOC7.Str.general device annunciation: 0 1 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Str.general: 0 - FALSE 1 - TRUE 127 Mapping 3.5 Earth fault overcurrent protection in earthed systems (PTOCx) PTOC7.Str.dirGeneral No. Information 1358 E/F picked up FORWARD (EF forward) x 1 1 0 0 1359 E/F picked up REVERSE (EF reverse) x 1 0 1 0 1354 E/F 3I0>>> PICKED UP (EF 3I0>>>Pickup) 0 1 1 1 1 PTOC7.Str.dirGeneral device annunciation: 1 - ON 0 - OFF 0 3 1 2 0 IEC Status Str.dirGeneral: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH PTOC7.Op No. 1366 Information E/F 3I0>>> TRIP (EF 3I0>>> TRIP) PTOC7.Op.general device annunciation: 128 0 1 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.5 Earth fault overcurrent protection in earthed systems (PTOCx) 3.5.4 Earth fault 3I0p (PTOC8) PTOC8.Mod No. Information 1332 Earth fault protection is BLOCKED (E/F BLOCK) x x 1 1 0 0 1309 >Earth Fault O/C Block 3I0p (>EF BLOCK 3I0p) x x 1 0 1 0 1331 Earth fault protection is switched OFF (E/F Prot. OFF) 1 x 0 0 0 0 Op. mode 3I0p (P3140) = Inactive PTOC8.Mod.stVal x 1 0 0 0 0 5 5 2 2 2 1 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOC8.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOC8.Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTOC8.Str No. 1357 Information E/F 3I0p PICKED UP (EF 3I0p Pickup) PTOC8.Str.general device annunciation: 0 1 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Str.general: 0 - FALSE 1 - TRUE 129 Mapping 3.5 Earth fault overcurrent protection in earthed systems (PTOCx) PTOC8.Str.dirGeneral No. Information 1358 E/F picked up FORWARD (EF forward) x 0 1 1 0 1359 E/F picked up REVERSE (EF reverse) x 0 0 1 1 1357 E/F 3I0p PICKED UP (EF 3I0p Pickup) 0 1 1 1 1 PTOC8.Str.dirGeneral device annunciation: 1 - ON 0 - OFF 0 0 1 3 2 IEC Status Str.dirGeneral: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH PTOC8.Op No. 1369 Information E/F 3I0p TRIP (EF 3I0p TRIP) PTOC8.Op.general device annunciation: 130 0 1 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.6 Earth fault detection in non-earthed systems (PSDE1) 3.6 Earth fault detection in non-earthed systems (PSDE1) PSDE1.Mod No. Information 1263 Sensitve E/F detection is ACTIVE (SensEF ACTIVE) 1 1 1 1 0 0 0 0 1262 Sensitve E/F detection is BLOCKED (SensEF BLOCK) 1 1 0 0 1 1 0 0 1261 Sensitve E/F detection is switched OFF (SensEF OFF) 1 0 1 0 1 0 1 0 PSDE1.Mod.stVal device annunciation: 5 2 5 1 5 5 5 5 1 - ON 0 - OFF IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PSDE1.Health No. 51 Information Device is Operational and Protecting (Device OK) PSDE1.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PSDE1.Str No. Information 1271 Sensitve E/F detection picked up (SensEF Pickup) PSDE1.Str.general device annunciation: 0 1 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Str.general: 0 - FALSE 1 - TRUE 131 Mapping 3.6 Earth fault detection in non-earthed systems (PSDE1) PSDE1.Str.dirGeneral No. Information 1276 Sensitve E/F detection Forward (SensEF Forward) 1 1 1 1 0 0 0 0 1277 Sensitve E/F detection Reverse (SensEF Reverse) 1 1 0 0 1 1 0 0 1278 Sensitve E/F detection Undef. Direction (SensEF undefDir) 1 0 1 0 1 0 1 0 PSDE1.Mod.dirGeneral device annunciation: 0 3 0 1 0 2 0 0 1 - ON 0 - OFF IEC Status Str.dirGeneral: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH PSDE1.Str.phsA No. 1272 Information Sensitve E/F detection Phase L1 (SensEF Phase L1) 0 1 PSDE1.Str.phsA device annunciation: 0 1 1 - ON 0 - OFF IEC Status Str.phsA: 0 - FALSE 1 - TRUE PSDE1.Str.dirPhsA No. Information 1276 Sensitve E/F detection Forward (SensEF Forward) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1277 Sensitve E/F detection Reverse (SensEF Reverse) 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1278 Sensitve E/F detection Undef. Direction (SensEF undefDir) 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1272 Sensitve E/F detection Phase L1 (SensEF Phase L1) 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 PSDE1.Str.dirPhsA device annunciation: 132 0 0 0 0 0 0 1 0 0 0 2 0 0 0 0 0 1 - ON 0 - OFF IEC Status Str.dirPhsA: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.6 Earth fault detection in non-earthed systems (PSDE1) PSDE1.Str.phsB No. 1273 Information Sensitve E/F detection Phase L2 (SensEF Phase L2) 0 1 PSDE1.Str.phsB device annunciation: 0 1 1 - ON 0 - OFF IEC Status Str.phsB: 0 - FALSE 1 - TRUE PSDE1.Str.dirPhsB No. Information 1276 Sensitve E/F detection Forward (SensEF Forward) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1277 Sensitve E/F detection Reverse (SensEF Reverse) 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1278 Sensitve E/F detection Undef. Direction (SensEF undefDir) 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1273 Sensitve E/F detection Phase L2 (SensEF Phase L2) 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 PSDE1.Str.dirPhsB 0 0 0 0 0 0 1 0 0 0 2 0 0 0 0 0 device annunciation: 1 - ON 0 - OFF IEC Status Str.dirPhsB: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD PSDE1.Str.phsC No. 1274 Information Sensitve E/F detection Phase L3 (SensEF Phase L3) 0 1 PSDE1.Str.phsC device annunciation: 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Str.phsC: 0 - FALSE 1 - TRUE 133 Mapping 3.6 Earth fault detection in non-earthed systems (PSDE1) PSDE1.Str.dirPhsC No. Information 1276 Sensitve E/F detection Forward (SensEF Forward) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1277 Sensitve E/F detection Reverse (SensEF Reverse) 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1278 Sensitve E/F detection Undef. Direction (SensEF undefDir) 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1274 Sensitve E/F detection Phase L3 (SensEF Phase L3) 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 PSDE1.Str.dirPhsC 0 0 0 0 0 0 1 0 0 0 2 0 0 0 0 0 device annunciation: 1 - ON 0 - OFF t IEC Status Str.dirPhsC: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD PSDE1.Op No. 1281 Information Sensitve E/F detection TRIP command (SensEF TRIP) PSDE1.Op.general device annunciation: 134 0 1 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.7 Restricted earth fault protection (PDIF3) 3.7 Restricted earth fault protection (PDIF3) PDIF3.Mod No. Information 5813 Restricted earth fault is ACTIVE (REF ACTIVE) x 0 1 1 1 1 1 5812 Restricted earth fault is BLOCKED (REF BLOCKED) x x 0 1 x x x 5811 Restricted earth fault is switched OFF (REF OFF) 1 0 0 0 0 0 0 290 Alarm: Broken current-wire detected L1 (Broken Iwire L1) x x 0 0 1 x x 291 Alarm: Broken current-wire detected L2 (Broken Iwire L2) x x 0 0 x 1 x 292 Alarm: Broken current-wire detected L3 (Broken Iwire L3) x x 0 0 x x 1 PDIF3.Mod.stVal device annunciation / setting: 5 5 1 2 2 2 2 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PDIF3.Health No. 51 Information Device is Operational and Protecting (Device OK) PDIF3.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM 135 Mapping 3.7 Restricted earth fault protection (PDIF3) PDIF3.Str No. 5817 Information Restr. earth flt.: picked up (REF picked up) PDIF3.Str.general device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE PDIF3.Str.dirGeneral No. Information PDIF3.Str.dirGeneral device annunciation: 1 1 - ON 0 - OFF x - irrelevant IEC Status Str.dirGeneral: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH PDIF3.Op No. 5821 Information Restr. earth flt.: TRIP (REF TRIP) PDIF3.Op.general device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE PDIF3.DifAClc No. 30654 Information Idiff REF(% Operational nominal current) (IdiffREF=) Value PDIF3.DifAClc.cVal.mag.f Measured value Absolute value PDIF3.DifAClc.units.SIUnit PDIF3.DifAClc.units.multiplier PDIF3.RstA No. 30655 Information Irest REF(% Operational nominal current) (IrestREF=) Value PDIF3.RstA.cVal.mag.f Measured value Absolute value PDIF3.RstA.units.SIUnit PDIF3.RstA.units.multiplier 136 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.8 Overcurrent protection (PTOCx) 3.8 Overcurrent protection (PTOCx) 3.8.1 O/C Ip (PTOC1) PTOC1.Mod No. Information 7153 Backup O/C is ACTIVE (O/C ACTIVE) x x 0 0 0 1 1 1 1 7152 Backup O/C is BLOCKED (O/C BLOCK) x x 0 1 1 0 0 1 1 7106 >BLOCK Backup OverCurrent Ip (>BLOCK O/C Ip) x x 1 0 1 0 1 0 1 7151 Backup O/C is switched OFF (O/C OFF) 1 x 0 0 0 0 0 0 0 Operating Mode (P2601) = OFF or Ip (P2640) and 3I0p PICKUP (P2650) = x 1 0 0 0 0 0 0 0 PTOC1.Mod.stVal 5 5 2 2 2 1 2 2 2 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOC1.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOC1.Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTOC1.Str No. 7193 Information Backup O/C Pickup Ip (O/C PICKUP Ip) PTOC1.Str.general device annunciation: 0 1 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Str.general: 0 - FALSE 1 - TRUE 137 Mapping 3.8 Overcurrent protection (PTOCx) PTOC1.Op No. 7223 Information Backup O/C TRIP Ip (O/C TRIP Ip) PTOC1.Op.general device annunciation: 3.8.2 0 1 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE O/C I> (PTOC2) PTOC2.Mod No. Information 7153 Backup O/C is ACTIVE (O/C ACTIVE) x x 0 0 0 1 1 1 1 7152 Backup O/C is BLOCKED (O/C BLOCK) x x 0 1 1 0 0 1 1 7105 >BLOCK Backup OverCurrent I> (>BLOCK O/C I>) x x 1 0 1 0 1 0 1 7151 Backup O/C is switched OFF (O/C OFF) 1 x 0 0 0 0 0 0 0 Operating Mode (P2601) = OFF or Iph> (P2620) and 3I0> (P2622) = x 1 0 0 0 0 0 0 0 PTOC2.Mod.stVal 5 5 2 2 2 1 2 2 2 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOC2.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOC2.Health.stVal device annunciation: 138 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.8 Overcurrent protection (PTOCx) PTOC2.Str No. 7192 Information Backup O/C Pickup I> (O/C PICKUP I>) PTOC2.Str.general device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE PTOC2.Op No. 7222 Information Backup O/C TRIP I> (O/C TRIP I>) PTOC2.Op.general device annunciation: 3.8.3 0 1 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE O/C I>> (PTOC3) PTOC3.Mod No. Information 7153 Backup O/C is ACTIVE (O/C ACTIVE) x x 0 0 0 1 1 1 1 7152 Backup O/C is BLOCKED (O/C BLOCK) x x 0 1 1 0 0 1 1 7104 >BLOCK Backup OverCurrent I>> (>BLOCK O/C I>>) x x 1 0 1 0 1 0 1 7151 Backup O/C is switched OFF (O/C OFF) 1 x 0 0 0 0 0 0 0 Operating Mode (P2601) = OFF or Iph>> (P2610) and 3I0>> PICKUP (P2612) = x 1 0 0 0 0 0 0 0 PTOC3.Mod.stVal device annunciation / setting: 5 5 2 2 2 1 2 2 2 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF 139 Mapping 3.8 Overcurrent protection (PTOCx) PTOC3.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOC3.Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTOC3.Str No. 7191 Information Backup O/C Pickup I>> (O/C PICKUP I>>) PTOC3.Str.general device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE PTOC3.Op No. 7221 Information Backup O/C TRIP I>> (O/C TRIP I>>) PTOC3.Op.general device annunciation: 140 0 1 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.8 Overcurrent protection (PTOCx) 3.8.4 O/C I>>> (PTOC4) PTOC4.Mod No. Information 7153 Backup O/C is ACTIVE (O/C ACTIVE) x x 0 0 0 0 0 0 1 1 1 1 1 1 1 1 7152 Backup O/C is BLOCKED (O/C BLOCK) x x 0 0 1 1 1 1 0 0 0 0 1 1 1 1 7130 >BLOCK I-STUB (>BLOCK I-STUB) x x 1 1 0 0 1 1 0 0 1 1 0 0 1 1 7131 >Enable I-STUB-Bus function (>I-STUB ENABLE) x x 0 1 0 1 0 1 0 1 0 1 0 1 0 1 7151 Backup O/C is switched OFF (O/C OFF) 1 x 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Operating Mode (P2601) = OFF or Iph>>> (P2630) and 3I0>>> PICKUP (P2632) = x 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 PTOC4.Mod.stVal 5 5 2 2 2 2 2 2 2 1 2 2 2 2 2 2 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOC4.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOC4.Health.stVal device annunciation: 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM 141 Mapping 3.8 Overcurrent protection (PTOCx) PTOC4.Str No. 7201 Information O/C I-STUB Pickup (I-STUB PICKUP) PTOC4.Str.general device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE PTOC4.Op No. 7235 Information O/C I-STUB TRIP (I-STUB TRIP) PTOC4.Op.general device annunciation: 142 0 1 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.8 Overcurrent protection (PTOCx) 3.8.5 Directional O/C Ip (PTOC9) PTOC9.Mod No. Information 7153 Backup O/C is ACTIVE (O/C ACTIVE) x x 0 0 1 1 7152 Backup O/C is BLOCKED (O/C BLOCK) x x 0 1 0 1 7151 Backup O/C is switched OFF (O/C OFF) x 1 0 0 0 0 7159 Operating Mode (P2601) = OFF or Ip ger (P2689) and 3I0 ger PICKUP (P2694) = 1 x 0 0 0 0 PTOC9.Mod.stVal 5 5 5 2 1 2 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOC9.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOC9.Health.stVal device annunciation: 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM 143 Mapping 3.8 Overcurrent protection (PTOCx) PTOC9.Str No. 7203 Information Backup O/C Pickup Ip directional (O/C PICK. IpDir) 0 1 PTOC9.Str.general device annunciation: 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE PTOC9.Str.dirGeneral No. Information 7203 Backup O/C Pickup Ip directional (O/C PICK. IpDir) 0 1 1 1 1 7248 Backup O/C forward direction (O/C Dir.forward) x 0 0 1 1 7249 Backup O/C reverse direction (O/C Dir.reverse) x 0 1 0 1 PTOC9.Str.dirGeneral device annunciation: 0 0 2 1 3 1 - ON 0 - OFF x - irrelevant IEC Status Str.dirGeneral: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH PTOC9.Op No. 7237 Information Backup O/C Pickup Ip directional (O/C TRIP IpDir.) 0 1 PTOC9.Op.general device annunciation: 144 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.8 Overcurrent protection (PTOCx) 3.8.6 Directional O/C I> (PTOC10) PTOC10.Mod No. Information 7153 Backup O/C is ACTIVE (O/C ACTIVE) x x 0 0 1 1 7152 Backup O/C is BLOCKED (O/C BLOCK) x x 0 1 0 1 7151 Backup O/C is switched OFF (O/C OFF) x 1 0 0 0 0 7158 Operating Mode (P2601) = OFF or Iph> ger (P2630) and 3I0> ger PICKUP (P2632) = 1 x 0 0 0 0 PTOC10.Mod.stVal 5 5 5 2 1 2 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOC10.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOC10.Health.stVal device annunciation: 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM 145 Mapping 3.8 Overcurrent protection (PTOCx) PTOC10.Str No. 7202 Information Backup O/C Pickup I> directional (O/C PICK. I>Dir) 0 1 PTOC10.Str.general device annunciation: 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE PTOC10.Str.dirGeneral No. Information 7202 Backup O/C Pickup I> directional (O/C PICK. I>Dir) 0 1 1 1 1 7248 Backup O/C forward direction (O/C Dir.forward) x 0 0 1 1 7249 Backup O/C reverse direction (O/C Dir.reverse) x 0 1 0 1 PTOC10.Str.dirGeneral device annunciation: 0 0 2 1 3 1 - ON 0 - OFF x - irrelevant IEC Status Str.dirGeneral: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH PTOC10.Op No. 7236 Information Backup O/C TRIP I> directional (O/C TRIP I>Dir.) PTOC10.Op.general device annunciation: 146 1 - ON 0 - OFF 0 1 0 1 IEC Status Op.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.9 Automatic reclosure function (RREC1) 3.9 Automatic reclosure function (RREC1) RREC1.Mod No. Information 2782 AR: Auto-reclose is switched on (AR on) x 0 1 1 2783 AR: Auto-reclose is blocked (AR is blocked) x x 1 0 2781 AR: Auto-reclose is switched off (AR off) 1 0 0 0 RREC1.Mod.stVal device annunciation: 5 5 2 1 1 - ON 0 - OFF x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF RREC1.Health No. 51 Information Device is Operational and Protecting (Device OK) RREC1.Health.stVal device annunciation: 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM 147 Mapping 3.9 Automatic reclosure function (RREC1) RREC1.Op No. 2851 Information AR: Close command (AR CLOSE Cmd.) RREC1.Op.general device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE RREC1.AutoRecSt No. Information 2801 AR in progress (AR in progress) 1 1 0 0 2862 AR successful (AR successful) 1 0 1 0 RREC1.AutoRecSt.stVal device annunciation: 148 1 - ON 0 - OFF 3 2 3 1 IEC Status AutoRecST.stVal: 1 - READY 2 - IN PROGRESS 3 - SUCCESSFUL SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.10 Synchronism and voltage check (RSYN1) 3.10 Synchronism and voltage check (RSYN1) RSYN1.Mod No. Information 2932 Synchro-check is BLOCKED (Sync. BLOCK) 1 1 0 0 2931 Synchro-check is switched OFF (Sync. OFF) 1 0 1 0 RSYN1.Mod.stVal device annunciation: 5 2 5 1 1 - ON 0 - OFF IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF RSYN1.Health No. 51 Information Device is Operational and Protecting (Device OK) RSYN1.Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM RSYN1.Rel No. 2951 Information Synchronism release (to ext. AR) (Sync. release) RSYN1.Rel.stVal device annunciation: 0 1 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Rel.stVal: 0 - FALSE 1 - TRUE 149 Mapping 3.10 Synchronism and voltage check (RSYN1) RSYN1.VInd No. Information 2947 Sync. Voltage diff. greater than limit (Sync. Udiff>) RSYN1.VInd.stVal device annunciation: 0 1 1 0 1 - ON 0 - OFF IEC Status VInd.stVal: 0 - FALSE 1 - TRUE RSYN1.AngInd No. 2949 Information Sync. Angle diff. greater than limit (Sync. -diff>) RSYN1.AngInd.stVal device annunciation: 1 - ON 0 - OFF 0 1 1 0 IEC Status AngInd.stVal: 0 - FALSE 1 - TRUE RSYN1.HzInd No. 2948 Information Sync. Freq. diff. greater than limit (Sync. fdiff>) RSYN1.HzInd.stVal device annunciation: 0 1 1 0 1 - ON 0 - OFF IEC Status HzInd.stVal: 0 - FALSE 1 - TRUE RSYN1.SynPrg No. 2941 Information Synchronization is running (Sync. running) RSYN1.SynPrg.stVal device annunciation: 150 1 - ON 0 - OFF 0 1 0 1 IEC Status SynPrg.stVal: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.10 Synchronism and voltage check (RSYN1) RSYN1.DifVCIc No. 636 Information U-diff (line-bus) (Udiff =) Value RSYN1.DifVClc.mag.f Measured value Absolute value RSYN1.DifVClc.units.SIUnit 29 V (Volt) RSYN1.DifVClc.units.multiplier 3 Kilo RSYN1.DifHzCIc No. 647 Information Value Frequency (difference line-bus) (F-diff=) RSYN1.DifHzClc.mag.f Measured value Absolute value RSYN1.DifHzClc.units.SIUnit 33 Hz RSYN1.DifHzClc.units.multiplier 0 1 RSYN1.DifAngCIc No. 648 Information Angle (difference line-bus) (-diff=) SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Value RSYN1.DifAngClc.mag.f Measured value Absolute value RSYN1.DifAngClc.units.SIUnit 9 (Degree) RSYN1.DifAngClc.units.multiplier 0 1 151 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) 3.11 Under and overvoltage protection (PTUVx, PTOVx) 3.11.1 Under voltage protection Uph-e < (PTUV1) PTUV1.Mod No. Information 10226 Uph-e<(<) Undervolt. is BLOCKED (Uph-e<(<) BLK) 0 0 1 Uph-e<(<) (P3751) = OFF or Uph-e< (P3752) = 0 0 1 0 PTUV1.Mod.stVal device annunciation / setting: 1 5 2 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTUV1.Health No. 51 Information Device is Operational and Protecting (Device OK) PTUV1.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTUV1.Str No. Information 10310 Uph-e< Pickup (Uph-e< Pickup) 0 1 1 1 1 10318 Uph-e< Pickup L1 (Uph-e< PU L1) 0 x 1 x x 10319 Uph-e< Pickup L2 (Uph-e< PU L2) 0 x x 1 x 10320 Uph-e< Pickup L3 (Uph-e< PU L3) 0 x x x 1 PTUV1.Str.general device annunciation: 152 0 1 1 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Str.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) PTUV1.Str.phsA No. 10318 Information Uph-e< Pickup L1 (Uph-e< PU L1) PTUV1.Str.phsA device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsA: 0 - FALSE 1 - TRUE PTUV1.Str.phsB No. 10319 Information Uph-e< Pickup L2 (Uph-e< PU L2) PTUV1.Str.phsB device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsB: 0 - FALSE 1 - TRUE PTUV1.Str.phsC No. 10320 Information Uph-e< Pickup L3 (Uph-e< PU L3) PTUV1.Str.phsC device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsC: 0 - FALSE 1 - TRUE PTUV1.Op No. Information 10317 Uph-e<(<) TRIP command (Uph-e<(<) TRIP) 0 0 1 1 10315 Uph-e< TimeOut (Uph-e< TimeOut) 0 1 0 1 PTUV1.Op.general device annunciation: 0 0 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 153 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) 3.11.2 Undervoltage protection Uph-e<< (PTUV2) PTUV2.Mod No. Information 10226 Uph-e<(<) Undervolt. is BLOCKED (Uph-e<(<) BLK) 0 0 1 Uph-e<(<) (P3751) = OFF or Uph-e<< (P3754) = 0 0 1 0 PTUV2.Mod.stVal device annunciation / setting: 1 5 2 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTUV2.Health No. 51 Information Device is Operational and Protecting (Device OK) PTUV2.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTUV2.Str No. Information 10311 Uph-e<< Pickup (Uph-e<< Pickup) 0 1 1 1 1 10321 Uph-e<< Pickup L1 (Uph-e<< PU L1) 0 x 1 x x 10322 Uph-e<< Pickup L2 (Uph-e<< PU L2) 0 x x 1 x 10323 Uph-e<< Pickup L3 (Uph-e<< PU L3) 0 x x x 1 PTUV2.Str.general device annunciation: 154 0 1 1 1 1 1 - ON 0 - OFF X - irrelevant IEC Status Str.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) PTUV2.Str.phsA No. 10321 Information Uph-e<< Pickup L1 (Uph-e<< PU L1) PTUV2.Str.phsA device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsA: 0 - FALSE 1 - TRUE PTUV2.Str.phsB No. 10322 Information Uph-e<< Pickup L2 (Uph-e<< PU L2) PTUV2.Str.phsB device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsB: 0 - FALSE 1 - TRUE PTUV2.Str.phsC No. 10323 Information Uph-e<< Pickup L3 (Uph-e<< PU L3) PTUV2.Str.phsC device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsC: 0 - FALSE 1 - TRUE PTUV2.Op No. Information 10317 Uph-e<(<) TRIP command (Uph-e<(<) TRIP) 0 0 1 1 10316 Uph-e<< TimeOut (Uph-e<< TimeOut) 0 1 0 1 PTUV2.Op.general device annunciation: 0 0 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 155 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) 3.11.3 Undervoltage protection Uphph< (PTUV3) PTUV3.Mod No. 10228 Information Uphph<(<) Undervolt. is BLOCKED (Uph-ph<(<) BLK) 0 0 1 Uph-ph<(<) (P3761) = OFF or Uph-ph< (P3762) = 0 0 1 0 PTUV3.Mod.stVal device annunciation / setting: 1 5 2 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTUV3.Health No. 51 Information Device is Operational and Protecting (Device OK) PTUV3.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTUV3.Str No. Information 10325 Uph-ph< Pickup (Uph-ph< Pickup) 0 1 1 1 1 10327 Uphph<(<) Pickup L1-L2 (Uphph<(<)PU L12) 0 x 1 x x 10328 Uphph<(<) Pickup L2-L3 (Uphph<(<)PU L23) 0 x x 1 x 10329 Uphph<(<) Pickup L3-L1 (Uphph<(<)PU L31) 0 x x x 1 PTUV3.Str.general device annunciation: 156 0 1 1 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Str.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) PTUV3.Str.phsA No. Information 10327 Uphph<(<) Pickup L1-L2 (Uphph<(<)PU L12) 0 0 1 1 10329 Uphph<(<) Pickup L3-L1 (Uphph<(<)PU L31) 0 1 0 1 PTUV3.Str.phsA device annunciation: 0 1 1 1 1 - ON 0 - OFF IEC Status Str.phsA: 0 - FALSE 1 - TRUE PTUV3.Str.phsB No. Information 10327 Uphph<(<) Pickup L1-L2 (Uphph<(<)PU L12) 0 0 1 1 10328 Uphph<(<) Pickup L2-L3 (Uphph<(<)PU L23) 0 1 0 1 PTUV3.Str.phsB device annunciation: 0 1 1 1 1 - ON 0 - OFF IEC Status Str.phsB: 0 - FALSE 1 - TRUE PTUV3.Str.phsC No. Information 10328 Uphph<(<) Pickup L2-L3 (Uphph<(<)PU L23) 0 0 1 1 10329 Uphph<(<) Pickup L3-L1 (Uphph<(<)PU L31) 0 1 0 1 PTUV3.Str.phsC device annunciation: 0 1 1 1 1 - ON 0 - OFF IEC Status Str.phsC: 0 - FALSE 1 - TRUE PTUV3.Op No. Information 10332 Uphph<(<) TRIP command (Uphph<(<) TRIP) 0 0 1 1 10330 Uphph< TimeOut (Uphph< TimeOut) 0 1 0 1 PTUV3.Op.general device annunciation: 0 0 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 157 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) 3.11.4 Undervoltage protection Uphph<< (PTUV4) PTUV4.Mod No. 10228 Information Uphph<(<) Undervolt. is BLOCKED (Uph-ph<(<) BLK) 0 0 1 Uph-ph<(<) (P3761) = OFF or Uph-ph<< (P3764) = 0 0 1 0 PTUV4.Mod.stVal device annunciation / setting: 1 5 2 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTUV4.Health No. 51 Information Device is Operational and Protecting (Device OK) PTUV4.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTUV4.Str No. Information 10326 Uph-ph<< Pickup (Uph-ph<< Pickup) 0 1 1 1 1 10327 Uphph<(<) Pickup L1-L2 (Uphph<(<)PU L12) 0 x 1 x x 10328 Uphph<(<) Pickup L2-L3 (Uphph<(<)PU L23) 0 x x 1 x 10329 Uphph<(<) Pickup L3-L1 (Uphph<(<)PU L31) 0 x x x 1 PTUV4.Str.general device annunciation: 158 0 1 1 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Str.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) PTUV4.Str.phsA No. Information 10327 Uphph<(<) Pickup L1-L2 (Uphph<(<)PU L12) 0 0 1 1 10329 Uphph<(<) Pickup L3-L1 (Uphph<(<)PU L31) 0 1 0 1 PTUV4.Str.phsA device annunciation: 0 1 1 1 1 - ON 0 - OFF IEC Status Str.phsA: 0 - FALSE 1 - TRUE PTUV4.Str.phsB No. Information 10327 Uphph<(<) Pickup L1-L2 (Uphph<(<)PU L12) 0 0 1 1 10328 Uphph<(<) Pickup L2-L3 (Uphph<(<)PU L23) 0 1 0 1 PTUV4.Str.phsB device annunciation: 0 1 1 1 1 - ON 0 - OFF IEC Status Str.phsB: 0 - FALSE 1 - TRUE PTUV4.Str.phsC No. Information 10328 Uphph<(<) Pickup L2-L3 (Uphph<(<)PU L23) 0 0 1 1 10329 Uphph<(<) Pickup L3-L1 (Uphph<(<)PU L31) 0 1 0 1 PTUV4.Str.phsC device annunciation: 0 1 1 1 1 - ON 0 - OFF IEC Status Str.phsC: 0 - FALSE 1 - TRUE PTUV4.Op No. Information 10332 Uphph<(<) TRIP command (Uphph<(<) TRIP) 0 0 1 1 10331 Uphph<< TimeOut (Uphph<< TimeOut) 0 1 0 1 PTUV4.Op.general device annunciation: 0 0 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 159 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) 3.11.5 Undervoltage protection U1< (PTUV5) PTUV5.Mod No. 10230 Information U1<(<) Undervolt. is BLOCKED (U1<(<) BLK) 0 0 1 U1<(<) (P3771) = OFF or U1< (P3772) = 0 0 1 0 PTUV5.Mod.stVal device annunciation / setting: 1 5 2 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTUV5.Health No. 51 Information Device is Operational and Protecting (Device OK) PTUV5.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTUV5.Str No. 10300 Information U1< Pickup (U1< Pickup) 0 1 PTUV5.Str.general device annunciation: 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE PTUV5.Op No. Information 10304 U1<(<) TRIP command (U1<(<) TRIP) 0 0 1 1 10302 U1< TimeOut (U1< TimeOut) 0 1 0 1 PTUV5.Op.general device annunciation: 160 0 0 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) 3.11.6 Undervoltage protection U1<< (PTUV6) PTUV6.Mod No. 10230 Information U1<(<) Undervolt. is BLOCKED (U1<(<) BLK) 0 0 1 U1<(<) (P3771) = OFF or U1<< (P3774) = 0 0 1 0 PTUV6.Mod.stVal device annunciation / setting: 1 5 2 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTUV6.Health No. 51 Information Device is Operational and Protecting (Device OK) PTUV6.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTUV6.Str No. 10301 Information U1<< Pickup (U1<< Pickup) PTUV6.Str.general device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE PTUV6.Op No. Information 10304 U1<(<) TRIP command (U1<(<) TRIP) 0 0 1 1 10303 U1<< TimeOut (U1<< TimeOut) 0 1 0 1 PTUV6.Op.general device annunciation: 0 0 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 161 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) 3.11.7 Overvoltage protection Uph> (PTOV1) PTOV1.Mod No. 10216 Information Uph-e>(>) Overvolt. is BLOCKED (Uph-e>(>) BLK) 0 0 1 Uph-e>(>) (P3701) = OFF or Uph-e> (P3702) = 0 1 0 PTOV1.Mod.stVal device annunciation / setting: 1 5 2 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOV1.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOV1.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTOV1.Str No. Information 10240 Uph-e> Pickup (Uph-e> Pickup) 0 1 1 1 1 10248 Uph-e> Pickup L1 (Uph-e> PU L1) 0 x 1 x x 10249 Uph-e> Pickup L2 (Uph-e> PU L2) 0 x x 1 x 10250 Uph-e> Pickup L3 (Uph-e> PU L3) 0 x x x 1 PTOV1.Str.general device annunciation: 162 0 1 1 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Str.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) PTOV1.Str.phsA No. 10248 Information Uph-e> Pickup L1 (Uph-e> PU L1) PTOV1.Str.phsA device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsA: 0 - FALSE 1 - TRUE PTOV1.Str.phsB No. 10249 Information Uph-e> Pickup L2 (Uph-e> PU L2) PTOV1.Str.phsB device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsB: 0 - FALSE 1 - TRUE PTOV1.Str.phsC No. 10250 Information Uph-e> Pickup L3 (Uph-e> PU L3) PTOV1.Str.phsC device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsC: 0 - FALSE 1 - TRUE PTOV1.Op No. 10245 Information Spannungsschutz.Uphgr_AUS 0 0 1 1 Uph-e> TimeOut (Uph-e> TimeOut) 0 1 0 1 PTOV1.Op.general device annunciation: 0 0 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 163 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) 3.11.8 Overvoltage protection Uph-e>> (PTOV2) PTOV2.Mod No. 10216 Information Uph-e>(>) Overvolt. is BLOCKED (Uph-e>(>) BLK) 0 0 1 Uph-e>(>) (P3701) = OFF or Uph-e>> (P3704) = 0 1 0 PTOV2.Mod.stVal device annunciation / setting: 1 5 2 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOV2.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOV2.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTOV2.Str No. Information 10241 Uph-e>> Pickup (Uph-e>> Pickup) 0 1 1 1 1 10242 Uph-e>(>) Pickup L1 (Uph-e>(>) PU L1) 0 x 1 x x 10243 Uph-e>(>) Pickup L2 (Uph-e>(>) PU L2) 0 x x 1 x 10244 Uph-e>(>) Pickup L3 (Uph-e>(>) PU L3) 0 x x x 1 PTOV2.Str.general device annunciation: 164 0 1 1 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Str.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) PTOV2.Str.phsA No. 10242 Information Uph-e>(>) Pickup L1 (Uph-e>(>) PU L1) PTOV2.Str.phsA device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsA: 0 - FALSE 1 - TRUE PTOV2.Str.phsB No. 10243 Information Uph-e>(>) Pickup L2 (Uph-e>(>) PU L2) PTOV2.Str.phsB device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsB: 0 - FALSE 1 - TRUE PTOV2.Str.phsC No. 10244 Information Uph-e>(>) Pickup L3 (Uph-e>(>) PU L3) PTOV2.Str.phsC device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsC: 0 - FALSE 1 - TRUE PTOV2.Op No. Information 10247 Uph-e>(>) TRIP command (Uph-e>(>) TRIP) 0 0 1 1 10246 Uph-e>> TimeOut (Uph-e>> TimeOut) 0 1 0 1 PTOV2.Op.general device annunciation: 0 0 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 165 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) 3.11.9 Overvoltage protection Uphph> (PTOV3) PTOV3.Mod No. 10218 Information Uph-ph>(>) Overvolt. is BLOCKED (Uph-ph>(>) BLK) 0 0 1 Uph-ph>(>) (P3711) = OFF or Uph-ph> (P3712) = 0 1 0 PTOV3.Mod.stVal device annunciation / setting: 1 5 2 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOV3.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOV3.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTOV3.Str No. Information 10255 Uph-ph> Pickup (Uphph> Pickup) 0 1 1 1 1 10257 Uph-ph>(>) Pickup L1-L2 (Uphph>(>)PU L12) 0 x 1 x x 10258 Uph-ph>(>) Pickup L2-L3 (Uphph>(>)PU L23) 0 x x 1 x 10259 Uph-ph>(>) Pickup L3-L1 (Uphph>(>)PU L31) 0 x x x 1 PTOV3.Str.general device annunciation: 166 0 1 1 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Str.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) PTOV3.Str.phsA No. Information 10257 Uph-ph>(>) Pickup L1-L2 (Uphph>(>)PU L12) 0 0 1 1 10259 Uph-ph>(>) Pickup L3-L1 (Uphph>(>)PU L31) 0 1 0 1 PTOV3.Str.phsA device annunciation: 0 1 1 1 1 - ON 0 - OFF IEC Status Str.phsA: 0 - FALSE 1 - TRUE PTOV3.Str.phsB No. Information 10257 Uph-ph>(>) Pickup L1-L2 (Uphph>(>)PU L12) 0 0 1 1 10258 Uph-ph>(>) Pickup L2-L3 (Uphph>(>)PU L23) 0 1 0 1 PTOV3.Str.phsB device annunciation: 0 1 1 1 1 - ON 0 - OFF IEC Status Str.phsB: 0 - FALSE 1 - TRUE PTOV3.Str.phsC No. Information 10258 Uph-ph>(>) Pickup L2-L3 (Uphph>(>)PU L23) 0 0 1 1 10259 Uph-ph>(>) Pickup L3-L1 (Uphph>(>)PU L31) 0 1 0 1 0 1 1 1 PTOV3.Str.phsC device annunciation: 1 - ON 0 - OFF IEC Status Str.phsC: 0 - FALSE 1 - TRUE PTOV3.Op No. Information 10262 Uph-ph>(>) TRIP command (Uphph>(>) TRIP) 0 0 1 1 10260 Uph-ph> TimeOut (Uphph> TimeOut) 0 1 0 1 PTOV3.Op.general device annunciation: 0 0 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 167 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) 3.11.10 Overvoltage protection Uphph>> (PTOV4) PTOV4.Mod No. 10218 Information Uph-ph>(>) Overvolt. is BLOCKED (Uph-ph>(>) BLK) 0 0 1 Uph-ph>(>) (P3711) = OFF or Uph-ph>> (P3714) = 0 1 0 PTOV4.Mod.stVal device annunciation / setting: 1 5 2 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOV4.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOV4.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTOV4.Str No. Information 10256 Uph-ph>> Pickup (Uphph>> Pickup) 0 1 1 1 1 10266 Uph-ph>> Pickup L1-L2 (Uphph>> PU L12) 0 x 1 x x 10267 Uph-ph>> Pickup L2-L3 (Uphph>> PU L23) 0 x x 1 x 10268 Uph-ph>> Pickup L3-L1 (Uphph>> PU L31) 0 x x x 1 PTOV4.Str.general device annunciation: 168 0 1 1 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Str.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) PTOV4.Str.phsA No. Information 10266 Uph-ph>> Pickup L1-L2 (Uphph>> PU L12) 0 0 1 1 10268 Uph-ph>> Pickup L3-L1 (Uphph>> PU L31) 0 1 0 1 PTOV4.Str.phsA device annunciation: 0 1 1 1 1 - ON 0 - OFF IEC Status Str.phsA: 0 - FALSE 1 - TRUE PTOV4.Str.phsB No. Information 10266 Uph-ph>> Pickup L1-L2 (Uphph>> PU L12) 0 0 1 1 10267 Uph-ph>> Pickup L2-L3 (Uphph>> PU L23) 0 1 0 1 PTOV4.Str.phsB device annunciation: 0 1 1 1 1 - ON 0 - OFF IEC Status Str.phsB: 0 - FALSE 1 - TRUE PTOV4.Str.phsC No. Information 10267 Uph-ph>> Pickup L2-L3 (Uphph>> PU L23) 0 0 1 1 10268 Uph-ph>> Pickup L3-L1 (Uphph>> PU L31) 0 1 0 1 PTOV4.Str.phsC device annunciation: 0 1 1 1 1 - ON 0 - OFF IEC Status Str.phsC: 0 - FALSE 1 - TRUE PTOV4.Op No. Information 10262 Uph-ph>(>) TRIP command (Uphph>(>) TRIP) 0 0 1 1 10261 Uph-ph>> TimeOut (Uphph>> TimeOut) 0 1 0 1 PTOV4.Op.general device annunciation: 0 0 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 169 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) 3.11.11 Overvoltage protection 3U0> (PTOV5) PTOV5.Mod No. 10220 Information 3U0>(>) Overvolt. is BLOCKED (3U0>(>) BLK) 0 0 1 3U0>(>) (or Ux) (P3721) = OFF or 3U0> (P3722) = 0 1 0 PTOV5.Mod.stVal device annunciation / setting: 1 5 2 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOV5.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOV5.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTOV5.Str No. 10270 Information 3U0> Pickup (3U0> Pickup) PTOV5.Str.general device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE PTOV5.Op No. Information 10274 3U0>(>) TRIP command (3U0>(>) TRIP) 0 0 1 1 10272 3U0> TimeOut (3U0> TimeOut) 0 1 0 1 PTOV5.Op.general device annunciation: 170 0 0 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) 3.11.12 Overvoltage protection 3U0>> (PTOV6) PTOV6.Mod No. 10220 Information 3U0>(>) Overvolt. is BLOCKED (3U0>(>) BLK) 0 0 1 3U0>(>) (or Ux) (P3721) = OFF or 3U0>> (P3724) = 0 1 0 PTOV6.Mod.stVal device annunciation / setting: 1 5 2 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOV6.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOV6.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTOV6.Str No. 10271 Information 3U0>> Pickup (3U0>> Pickup) PTOV6.Str.general device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE PTOV6.Op No. Information 10274 3U0>(>) TRIP command (3U0>(>) TRIP) 0 0 1 1 10273 3U0>> TimeOut (3U0>> TimeOut) 0 1 0 1 PTOV6.Op.general device annunciation: 0 0 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 171 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) 3.11.13 Overvoltage protection U1> (PTOV7) PTOV7.Mod No. 10222 Information U1>(>) Overvolt. is BLOCKED (U1>(>) BLK) 0 0 1 U1>(>) (P3731) = OFF or U1> (P3732) = 0 1 0 PTOV7.Mod.stVal device annunciation / setting: 1 5 2 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOV7.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOV7.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTOV7.Str No. 10280 Information U1> Pickup (U1> Pickup) 0 1 PTOV7.Str.general device annunciation: 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE PTOV7.Op No. Information 10284 U1>(>) TRIP command (U1>(>) TRIP) 0 0 1 1 10282 U1> TimeOut (U1> TimeOut) 0 1 0 1 PTOV7.Op.general device annunciation: 172 0 0 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) 3.11.14 Overvoltage protection U1>> (PTOV8) PTOV8.Mod No. 10222 Information U1>(>) Overvolt. is BLOCKED (U1>(>) BLK) 0 0 1 U1>(>) (P3731) = OFF or U1>> (P3734) = 0 1 0 PTOV8.Mod.stVal device annunciation / setting: 1 5 2 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOV8.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOV8.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTOV8.Str No. 10281 Information U1>> Pickup (U1>> Pickup) PTOV8.Str.general device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE PTOV8.Op No. Information 10284 U1>(>) TRIP command (U1>(>) TRIP) 0 0 1 1 10283 U1>> TimeOut (U1>> TimeOut) 0 1 0 1 PTOV8.Op.general device annunciation: 0 0 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 173 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) 3.11.15 Overvoltage protection U2> (PTOV9) PTOV9.Mod No. 10224 Information U2>(>) Overvolt. is BLOCKED (U2>(>) BLK) 0 0 1 U2>(>) (P3741) = OFF or U2> (P3742) = 0 1 0 PTOV9.Mod.stVal device annunciation / setting: 1 5 2 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOV9.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOV9.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTOV9.Str No. 10290 Information U2> Pickup (U2> Pickup) 0 1 PTOV9.Str.general device annunciation: 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE PTOV9.Op No. Information 10294 U2>(>) TRIP command (U2>(>) TRIP) 0 0 1 1 10292 U2> TimeOut (U2> TimeOut) 0 1 0 1 PTOV9.Op.general device annunciation: 174 0 0 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.11 Under and overvoltage protection (PTUVx, PTOVx) 3.11.16 Overvoltage protection U2>> (PTOV10) PTOV10.Mod No. 10224 Information U2>(>) Overvolt. is BLOCKED (U2>(>) BLK) 0 0 1 U2>(>) (P3741) = OFF or U2>> (P3742) = 0 1 0 PTOV10.Mod.stVal 1 5 2 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOV10.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOV10.Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTOV10.Str No. 10291 Information U2>> Pickup (U2>> Pickup) PTOV10.Str.general device annunciation: 1 - ON 0 - OFF IEC Status Str.general: 0 1 0 1 0 - FALSE 1 - TRUE PTOV10.Op No. Information 10294 U2>(>) TRIP command (U2>(>) TRIP) 0 0 1 1 10293 U2>> TimeOut (U2>> TimeOut) 0 1 0 1 PTOV10.Op.general device annunciation: 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 0 0 0 1 IEC Status Op.general: 0 - FALSE 1 - TRUE 175 Mapping 3.12 Frequency protection (PTUFx, PTOFx) 3.12 Frequency protection (PTUFx, PTOFx) 3.12.1 Underfrequency protection FQS stage f1 (PTUF1) PTUF1.Mod No. Information 5212 Frequency protection is BLOCKED (Freq. BLOCKED) x x 0 1 x x 5206 >BLOCK frequency protection stage f1 (>BLOCK f1) x x 0 x 1 x 5215 Frequency protection undervoltage Blk (Freq UnderV Blk) x x 0 x x 1 O/U FREQ. f1 (P3601) = ON and f1 PICKUP (P3602/3603) < Rated Frequency (P230) x 0 1 1 1 1 O/U FREQ. f1 (P3601) =OFF or f1 PICKUP (P3602/3603) = Rated Frequency (P230) 1 0 0 0 0 0 PTUF1.Mod.stVal 5 5 1 2 2 2 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTUF1.Health No. 51 Information Device is Operational and Protecting (Device OK) PTUF1.Health.stVal device annunciation: 176 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.12 Frequency protection (PTUFx, PTOFx) PTUF1.Str No. Information 5232 Frequency protection: f1 picked up (f1 picked up) 0 0 1 1 O/U FREQ. f1 P3601) = ON and f1 PICKUP (P3602/3603) < Rated Frequency (P230) 0 1 0 1 PTUF1.Str.general device annunciation / setting: 0 0 0 1 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.general: 0 - FALSE 1 - TRUE PTUF1.Op No. 5236 Information Frequency protection: f1 TRIP (f1 TRIP) 0 0 1 1 O/U FREQ. f1 P3601) = ON and f1 PICKUP (P3602/3603) < Rated Frequency (P230) 0 1 0 1 PTUF1.Op.general device annunciation / setting: 0 0 0 1 1 - ON / TRUE 0 - OFF / FALSE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 177 Mapping 3.12 Frequency protection (PTUFx, PTOFx) 3.12.2 Underfrequency protection FQS stage f2 (PTUF2) PTUF2.Mod No. Information 5212 Frequency protection is BLOCKED (Freq. BLOCKED) x x 0 1 x x 5207 >BLOCK frequency protection stage f2 (>BLOCK f2) x x 0 x 1 x 5215 Frequency protection undervoltage Blk (Freq UnderV Blk) x x 0 x x 1 O/U FREQ. f2 (P3611) = ON and f2 PICKUP (P3612/3613) < Rated Frequency (P230) x 0 1 1 1 1 O/U FREQ. f2 (P3611) = OFF or f2 PICKUP (P3612/3613) = Rated Frequency (P230) 1 0 0 0 0 0 PTUF2.Mod.stVal 5 5 1 2 2 2 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTUF2.Health No. 51 Information Device is Operational and Protecting (Device OK) PTUF2.Health.stVal device annunciation: 178 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.12 Frequency protection (PTUFx, PTOFx) PTUF2.Str No. Information 5233 Frequency protection: f2 picked up (f2 picked up) 0 0 1 1 O/U FREQ. f2 (P3611) = ON and f2 PICKUP (P3612/3613) < Rated Frequency (P230) 0 1 0 1 PTUF2.Str.general device annunciation / setting: 0 0 0 1 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.general: 0 - FALSE 1 - TRUE PTUF2.Op No. 5237 Information Frequency protection: f2 TRIP (f2 TRIP) 0 0 1 1 O/U FREQ. f2 (P3611)= ON and f2 PICKUP (P3612/3613) < Rated Frequency (P230) 0 1 0 1 PTUF2.Op.general device annunciation / setting: 0 0 0 1 1 - ON / TRUE 0 - OFF / FALSE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 179 Mapping 3.12 Frequency protection (PTUFx, PTOFx) 3.12.3 Underfrequency protection FQS stage f3 (PTUF3) PTUF3.Mod No. Information 5212 Frequency protection is BLOCKED (Freq. BLOCKED) x x 0 1 x x 5208 >BLOCK frequency protection stage f3 (>BLOCK f3) x x 0 x 1 x 5215 Frequency protection undervoltage Blk (Freq UnderV Blk) x x 0 x x 1 O/U FREQ. f3 (P3621) = ON and f3 PICKUP (P3622/3623) < Rated Frequency (P230) x 0 1 1 1 1 O/U FREQ. f3 (P3621) = OFF or f3PICKUP (P3622/3623) = Rated Frequency (P230) 1 0 0 0 0 0 PTUF3.Mod.stVal 5 5 1 2 2 2 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTUF3.Health No. 51 Information Device is Operational and Protecting (Device OK) PTUF3.Health.stVal device annunciation: 180 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.12 Frequency protection (PTUFx, PTOFx) PTUF3.Str No. Information 5234 Frequency protection: f3 picked up (f3 picked up) 0 0 1 1 O/U FREQ. f3 (P3621) = ON and f3 PICKUP (P3622/3623) < Rated Frequency (P230) 0 1 0 1 PTUF3.Str.general device annunciation / setting: 0 0 0 1 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.general: 0 - FALSE 1 - TRUE PTUF3.Op No. 5238 Information Frequency protection: f3 TRIP (f3 TRIP) 0 0 1 1 O/U FREQ. f3 (P3621) = ON and f3 PICKUP (P3622/3623) < Rated Frequency (P230) 0 1 0 1 PTUF3.Op.general device annunciation / setting: 0 0 0 1 1 - ON / TRUE 0 - OFF / FALSE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 181 Mapping 3.12 Frequency protection (PTUFx, PTOFx) 3.12.4 Underfrequency protection FQS stage f4 (PTUF4) PTUF4.Mod No. Information 5212 Frequency protection is BLOCKED (Freq. BLOCKED) x x 0 1 x x 5209 >BLOCK frequency protection stage f4 (>BLOCK f4) x x 0 x 1 x 5215 Frequency protection undervoltage Blk (Freq UnderV Blk) x x 0 x x 1 O/U FREQ. f4 ON (P3631) and f4 PICKUP (P3632/3633) < Rated Frequency (P230) x 0 1 1 1 1 O/U FREQ. f4 (P3631) = OFF or f4 PICKUP (P3632/3633) = Rated Frequency (P230) 1 0 0 0 0 0 PTUF4.Mod.stVal 5 5 1 2 2 2 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTUF4.Health No. 51 Information Device is Operational and Protecting (Device OK) PTUF4.Health.stVal device annunciation: 182 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.12 Frequency protection (PTUFx, PTOFx) PTUF4.Str No. Information 5235 Frequency protection: f4 picked up (f4 picked up) 0 0 1 1 O/U FREQ. f4 (P3631)= ON and f4 PICKUP (P3632/3633) < Rated Frequency (P230) 0 1 0 1 PTUF4.Str.general device annunciation / setting: 0 0 0 1 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.general: 0 - FALSE 1 - TRUE PTUF4.Op No. 5239 Information Frequency protection: f4 TRIP (f4 TRIP) 0 0 1 1 O/U FREQ. f4 (P3631) = ON and f4 PICKUP (P3632/3633) < Rated Frequency (P230) 0 1 0 1 PTUF4.Op.general device annunciation / setting: 0 0 0 1 1 - ON / TRUE 0 - OFF / FALSE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 183 Mapping 3.12 Frequency protection (PTUFx, PTOFx) 3.12.5 Overfrequency protection FQS stage f1 (PTOF1) PTOF1.Mod No. Information 5212 Frequency protection is BLOCKED (Freq. BLOCKED) x x 0 1 x x 5206 >BLOCK frequency protection stage f1 (>BLOCK f1) x x 0 x 1 x 5215 Frequency protection undervoltage Blk (Freq UnderV Blk) x x 0 x x 1 O/U FREQ. f1 (P3601) = ON and f1 PICKUP (P3602/3603) < Rated Frequency (P230) x 1 0 0 0 0 O/U FREQ. f1 (P3601) = OFF or f1 PICKUP (P3602/3603) = Rated Frequency (P230) 1 0 0 0 0 0 PTOF1.Mod.stVal 5 5 1 2 2 2 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOF1.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOF1.Health.stVal device annunciation: 184 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.12 Frequency protection (PTUFx, PTOFx) PTOF1.Str No. 5232 Information Frequency protection: f1 picked up (f1 picked up) 0 0 1 1 O/U FREQ. f1 (P3601) = ON and f1 PICKUP (P3602/3603) > Rated Frequency (P230) 1 0 1 0 PTOF1.Str.general device annunciation / setting: 0 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.general: 0 - FALSE 1 - TRUE PTOF1.Op No. 5236 Information Frequency protection: f1 TRIP (f1 TRIP) 0 0 1 1 O/U FREQ. f1 (P3601) = ON and f1 PICKUP (P3602/3603) > Rated Frequency (P230)q 1 0 1 0 PTOF1.Op.general device annunciation / setting: 0 0 1 0 1 - ON / TRUE 0 - OFF / FALSE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 185 Mapping 3.12 Frequency protection (PTUFx, PTOFx) 3.12.6 Overfrequency protection FQS stage f2 (PTOF2) PTOF2.Mod No. Information 5212 Frequency protection is BLOCKED (Freq. BLOCKED) x x 0 1 x x 5207 >BLOCK frequency protection stage f2 (>BLOCK f2) x x 0 x 1 x 5215 Frequency protection undervoltage Blk (Freq UnderV Blk) x x 0 x x 1 O/U FREQ. f2 (P3611) = ON and f2 PICKUP (P3612/3613) < Rated Frequency (P230) x 1 0 0 0 0 O/U FREQ. f2 (P3611) = OFF or f2 PICKUP (P3612/3613) = Rated Frequency (P230) 1 0 0 0 0 0 PTOF2.Mod.stVal 5 5 1 2 2 2 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOF2.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOF2.Health.stVal device annunciation: 186 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.12 Frequency protection (PTUFx, PTOFx) PTOF2.Str No. Information 5233 Frequency protection: f2 picked up (f2 picked up) 0 0 1 1 O/U FREQ. f2 (P3611)= ON and f2 PICKUP (P3612/3613) > Rated Frequency (P230) 1 0 1 0 PTOF2.Str.general device annunciation / setting: 0 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.general: 0 - FALSE 1 - TRUE PTOF2.Op No. 5237 Information Frequency protection: f2 TRIP (f2 TRIP) 0 0 1 1 O/U FREQ. f2 (P3611) = ON and f2 PICKUP (P3612/3613) > Rated Frequency (P230) 1 0 1 0 PTOF2.Op.general device annunciation / setting: 0 0 1 0 1 - ON / TRUE 0 - OFF / FALSE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 187 Mapping 3.12 Frequency protection (PTUFx, PTOFx) 3.12.7 Overfrequency protection FQS stage f3 (PTOF3) PTOF3.Mod No. Information 5212 Frequency protection is BLOCKED (Freq. BLOCKED) x x 0 1 x x 5208 >BLOCK frequency protection stage f3 (>BLOCK f3) x x 0 x 1 x 5215 Frequency protection undervoltage Blk (Freq UnderV Blk) x x 0 x x 1 O/U FREQ. f3 (P3621) = ON and f3 PICKUP (P3622/3623) < Rated Frequency (P230) x 1 0 0 0 0 O/U FREQ. f3 (P3621)= OFF or f3 PICKUP (P3622/3623) = Rated Frequency (P230) 1 0 0 0 0 0 PTOF3.Mod.stVal 5 5 1 2 2 2 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOF3.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOF3.Health.stVal device annunciation: 188 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.12 Frequency protection (PTUFx, PTOFx) PTOF3.Str No. Information 5234 Frequency protection: f3 picked up (f3 picked up) 0 0 1 1 O/U FREQ. f3 (P3621) = ON and f3 PICKUP (P3622/3623) > Rated Frequency (P230) 1 0 1 0 PTOF3.Str.general device annunciation / setting: 0 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.general: 0 - FALSE 1 - TRUE PTOF3.Op No. 5238 Information Frequency protection: f3 TRIP (f3 TRIP) 0 0 1 1 O/U FREQ. f3 (P3621) = ON and f3 PICKUP (P3622/3623) > Rated Frequency (P230) 1 0 1 0 PTOF3.Op.general device annunciation / setting: 0 0 1 0 1 - ON / TRUE 0 - OFF / FALSE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 189 Mapping 3.12 Frequency protection (PTUFx, PTOFx) 3.12.8 Overfrequency protection FQS stage f4 (PTOF4) PTOF4.Mod No. Information 5212 Frequency protection is BLOCKED (Freq. BLOCKED) x x 0 1 x x 5209 >BLOCK frequency protection stage f4 (>BLOCK f4) x x 0 x 1 x 5215 Frequency protection undervoltage Blk (Freq UnderV Blk) x x 0 x x 1 O/U FREQ. f4 (P3631) = ON and f4 PICKUP (P3632/3633) < Rated Frequency (P230) x 1 0 0 0 0 O/U FREQ. f4 (P3631) = OFF or f4 PICKUP (P3632/3633) = Rated Frequency (P230) 1 0 0 0 0 0 PTOF4.Mod.stVal 5 5 1 2 2 2 device annunciation / setting: 1 - ON / TRUE 0 - OFF / FALSE x - irrelevant IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTOF4.Health No. 51 Information Device is Operational and Protecting (Device OK) PTOF4.Health.stVal device annunciation: 190 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.12 Frequency protection (PTUFx, PTOFx) PTOF4.Str No. Information 5235 Frequency protection: f4 picked up (f4 picked up) 0 0 1 1 O/U FREQ. f4 (P3631) = ON and f4 PICKUP (P3632/3633) > Rated Frequency (P230) 1 0 1 0 PTOF4.Str.general device annunciation / setting: 0 0 1 0 1 - ON / TRUE 0 - OFF / FALSE IEC Status Str.general: 0 - FALSE 1 - TRUE PTOF4.Op No. 5239 Information Frequency protection: f4 TRIP (f4 TRIP) 0 0 1 1 O/U FREQ. f4 (P3631) = ON and f4 PICKUP (P3632/3633) > Rated Frequency (P230) 1 0 1 0 PTOF4.Op.general device annunciation / setting: 0 0 1 0 1 - ON / TRUE 0 - OFF / FALSE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Op.general: 0 - FALSE 1 - TRUE 191 Mapping 3.13 Fault locator (RFLO1) 3.13 Fault locator (RFLO1) RFLO1.Mod No. Information Fault Locator (P138) = Enabled or with BCD-output RFLO1.Mod.stVal device annunciation / setting: 0 1 5 1 1 - ON / TRUE 0 - OFF / FALSE IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF RFLO1.Health No. 51 1133 Information Device is Operational and Protecting (Device OK) 0 0 1 1 Fault locator setting error K0,angle(K0) (Flt.Loc.ErrorK0) 0 1 0 1 RFLO1.Health.stVal device annunciation: 192 3 3 1 2 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.13 Fault locator (RFLO1) RFLO1.FltZ No. Information Absolute value of the fault impedance Angle of the fault impedance Value RFLO1.FltZ.cVal.mag.f Measured value Absolute value RFLO1.FltZ.units.SIUnit 30 (Ohm) RFLO1.FltZ.units.multiplier 0 1 Measured value Angle in RFLO1.FltZ.cVal.ang.f RFLO1.FltDiskm No. 1119 or 1122 Information Flt Locator: Distance to fault (dist =) Value RFLO1.FltDiskm.mag.f Measured value Absolute value RFLO1.FltDiskm.units.SIUnit 2 Meter or miles RFLO1.FltDiskm.units.multiplier 3 Kilo Measured value Absolute value RFLO1.FltDisPrc.units.SIUnit 1 NONE RFLO1.FltDisPrc.multiplier 0 1 RFLO1.FltDisPrc No. 1120 Information Value Flt Locator: Distance [%] to fault RFLO1.FltDisPrc.mag.f (d[%] =) SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 193 Mapping 3.14 Circuit breaker failure protection (RBRF1) 3.14 Circuit breaker failure protection (RBRF1) RBRF1.Mod No. Information 1452 Breaker failure is BLOCKED (BkrFail BLOCK) 0 0 1 1 1451 Breaker failure is switched OFF (BkrFail OFF) 0 1 0 1 RBRF1.Mod.stVal device annunciation: 1 5 2 5 1 - ON 0 - OFF IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF RBRF1.Health No. 51 Information Device is Operational and Protecting (Device OK) RBRF1.Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM RBRF1.Str No. 1461 Information Breaker failure protection started (BF Start) RBRF1.Str.general device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE RBRF1.OpEx No. 1494 Information BF Trip T2 (busbar trip) (BF T2-TRIP(bus)) RBRF1.OpEx.general device annunciation: 194 1 - ON 0 - OFF 0 1 0 1 IEC Status OpEx.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.14 Circuit breaker failure protection (RBRF1) RBRF1.OpIn No. Information 1472 BF Trip T1 (local trip) - only phase L1 (BF T1-TRIP 1pL1) 0 1 x x x 1473 BF Trip T1 (local trip) - only phase L2 (BF T1-TRIP 1pL2) 0 x 1 x x 1474 BF Trip T1 (local trip) - only phase L3 (BF T1-TRIP 1pL3) 0 x x 1 x 1476 BF Trip T1 (local trip) - 3pole (BF T1-TRIP L123) RBRF1.OpIn.general device annunciation: 1 - ON 0 - OFF x - irrelevant 0 x x x 1 0 1 1 1 1 IEC Status OpIn.general: 0 - FALSE 1 - TRUE RBRF1.OpIn.phsA No. 1472 Information BF Trip T1 (local trip) - only phase L1 (BF T1-TRIP 1pL1) 0 1 RBRF1.OpIn.phsA device annunciation: 0 1 1 - ON 0 - OFF IEC Status OpIn.phsA: 0 - FALSE 1 - TRUE RBRF1.OpIn.phsB No. 1473 Information BF Trip T1 (local trip) - only phase L2 (BF T1-TRIP 1pL2) 0 1 RBRF1.OpIn.phsB device annunciation: 0 1 1 - ON 0 - OFF IEC Status OpIn.phsB: 0 - FALSE 1 - TRUE RBRF1.OpIn.phsC No. 1474 Information BF Trip T1 (local trip) - only phase L3 (BF T1-TRIP 1pL3) 0 1 RBRF1.OpIn.phsC device annunciation: 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status OpIn.phsC: 0 - FALSE 1 - TRUE 195 Mapping 3.15 Thermal overload protection (PTTR1) 3.15 Thermal overload protection (PTTR1) PTTR1.Mod No. Information 1513 Thermal Overload Protection ACTIVE (Th.O/L ACTIVE) x 0 1 1 1512 Thermal Overload Protection BLOCKED (Th.Overload BLK) x x 0 1 1511 Thermal Overload Protection OFF (Th.Overload OFF) 1 0 0 0 PTTR1.Mod.stVal device annunciation: 5 5 1 2 1 - ON 0 - OFF IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTTR1.Health No. 51 Information Device is Operational and Protecting (Device OK) PTTR1.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTTR1.Str No. 1517 Information Th. Overload Pickup before trip (Th.O/L Pickup) PTTR1.Str.general device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.general: 0 - FALSE 1 - TRUE PTTR1.Op No. 1521 Information Th. Overload TRIP command (Th.O/L TRIP) PTTR1.Op.general device annunciation: 196 0 1 0 1 1 - ON 0 - OFF IEC Status Op.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.15 Thermal overload protection (PTTR1) PTTR1.AlmThm No. Information 1516 Th. Overload Alarm: Near Thermal Trip (Th.O/L Alarm) PTTR1.AlmThm.general device annunciation: 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 0 1 0 1 IEC Status AlmThm.general: 0 - FALSE 1 - TRUE 197 Mapping 3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx) 3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx) 3.16.1 Threepole tripping (XCBR1) XCBR1.Mod No. 52 Information At Least 1 Protection Funct. is Active (ProtActive) XCBR1.Mod.stVal device annunciation: 1 0 1 5 1 - ON 0 - OFF IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF XCBR1.Health No. 51 Information Device is Operational and Protecting (Device OK) XCBR1.Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM XCBR1.Loc No. 55 Information Reset Device (Reset Device) 1 0 XCBR1.Loc.stVal device annunciation: 1 0 1 - ON 0 - OFF IEC Status Loc.stVal: 0 - FALSE 1 - TRUE XCBR1.OpCnt No. Information 1000 Number of breaker TRIP commands (# TRIPs=) 198 Value XCBR1.OpCnt.stVal Metered value Absolute value SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx) XCBR1.Pos No. Information 4601 >52-a contact (OPEN, if bkr is open) (>52-a) 0 1 0 1 4602 >52-b contact (OPEN, if bkr is closed) (>52-b) 0 0 1 1 XCBR1.Pos.stVal - if spontan information 11 01 10 11 XCBR1.Pos.stVal - if command is running 00 01 10 00 device annunciation: 1 - ON IEC Status Pos.stVal: 0 - OFF 00 - INTERMEDIATE STATE 01 - OFF 10 - ON 11 - BAD STATE XCBR1.BlkOpn No. 55 Information Reset Device (Reset Device) XCBR1.BlkOpn.stVal device annunciation: 1 - ON 0 - OFF 1 0 0 1 IEC Status BlkOpn.stVal: 0 - FALSE 1 - TRUE XCBR1.BlkCls No. 55 Information Reset Device (Reset Device) XCBR1.BlkCls.stVal device annunciation: 1 - ON 0 - OFF 1 0 0 1 IEC Status BlkCls.stVal: 0 - FALSE 1 - TRUE XCBR1.CirSpv No. 6865 Information Failure Trip Circuit (FAIL: Trip cir.) XCBR1.CirSpv.stVal device annunciation: 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 0 1 0 1 IEC Status CirSpv.stVal: 0 - FALSE 1 - TRUE 199 Mapping 3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx) XCBR1.SumSwARs1 No. Information 1027 Accumulation of interrupted current L1 ( IL1 =) Value XCBR1.SumSwARs1.actVal Metered value Current value of acummulated interrupted current = actVal x pulsQty XCBR1.SumSwARs1.units.SIUnit 5 A (Ampere) XCBR1.SumSwARs1.units.multiplier 3 Kilo 1.000000e-002 A / Metered value XCBR1.SumSwARs1.pulsQty XCBR1.SumSwARs2 No. 1028 Information Accumulation of interrupted current L2 ( IL2 =) Value XCBR1.SumSwARs2.actVal Metered value Current value of acummulated interrupted current = actVal x pulsQty XCBR1.SumSwARs2.units.SIUnit 5 A (Ampere) XCBR1.SumSwARs2.units.multiplier 3 Kilo 1.000000e-002 A / Metered value XCBR1.SumSwARs2.pulsQty XCBR1.SumSwARs3 No. 1029 Information Accumulation of interrupted current L3 ( IL3 =) Value XCBR1.SumSwARs3.actVal Metered value Current value of acummulated interrupted current = actVal x pulsQty XCBR1.SumSwARs3.units.SIUnit 5 A (Ampere) XCBR1.SumSwARs3.units.multiplier 3 Kilo 1.000000e-002 A / Metered value XCBR1.SumSwARs3.pulsQty 200 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx) 3.16.2 Single-pole / threepole tripping (XCBR2, XCBR3, XCBR4) XCBR2.Mod No. 52 Information At Least 1 Protection Funct. is Active (ProtActive) XCBR2.Mod.stVal device annunciation: 1 0 1 5 1 - ON 0 - OFF IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF XCBR2.Health No. 51 Information Device is Operational and Protecting (Device OK) XCBR2.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM XCBR2.Loc No. 55 Information Reset Device (Reset Device) XCBR2.Loc.stVal device annunciation: 1 0 1 0 1 - ON 0 - OFF IEC Status Loc.stVal: 0 - FALSE 1 - TRUE XCBR2.OpCnt No. 1001 Information Value Number of breaker TRIP commands L1 (TripNo L1=) XCBR2.OpCnt.stVal Metered value SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Absolute value 201 Mapping 3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx) XCBR2.Pos No. 351 Information >Circuit breaker aux. contact: Pole L1 (>CB Aux. L1) 0 1 XCBR2.Pos.stVal device annunciation: 01 10 1 - ON 0 - OFF IEC Status Pos.stVal: 00 - INTERMEDIATE STATE 01 - OFF 10 - ON 11 - BAD STATE XCBR2.BlkOpn No. 55 Information Reset Device (Reset Device) XCBR2.BlkOpn.stVal device annunciation: 1 - ON 0 - OFF 1 0 0 1 IEC Status BlkOpn.stVal: 0 - FALSE 1 - TRUE XCBR2.BlkCls No. 55 Information Reset Device (Reset Device) XCBR2.BlkCls.stVal device annunciation: 1 - ON 0 - OFF 1 0 0 1 IEC Status BlkCls.stval: 0 - FALSE 1 - TRUE XCBR2.CirSpv No. 6865 Information Failure Trip Circuit (FAIL: Trip cir.) XCBR2.CirSpv.stVal device annunciation: 1 - ON 0 - OFF 202 0 1 0 1 IEC Status CirSpv.stVal: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx) XCBR2.SumSwARs No. 1027 Information Value XCBR2.SumSwARs.actVal Accumulation of interrupted current L1 ( IL1 =) Metered value Current value of acummulated interrupted current = actVal x pulsQty XCBR2.SumSwARs.units.SIUnit 5 A (Ampere) XCBR2.SumSwARs.units.multiplier 3 Kilo 1.000000e-002 A / Metered value XCBR2.SumSwARs.pulsQty XCBR3.Mod No. 52 Information At Least 1 Protection Funct. is Active (ProtActive) XCBR3.Mod.stVal device annunciation: 1 0 1 5 1 - ON 0 - OFF IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF XCBR3.Health No. 51 Information Device is Operational and Protecting (Device OK) XCBR3.Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM XCBR3.Loc No. 55 Information Reset Device (Reset Device) XCBR3.Loc.stVal device annunciation: 1 0 1 0 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Loc.stVal: 0 - FALSE 1 - TRUE 203 Mapping 3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx) XCBR3.OpCnt No. 1002 Information Value Number of breaker TRIP commands L2 (TripNo L2=) XCBR3.OpCnt.stVal Metered value Absolute value XCBR3.Pos No. 352 Information >Circuit breaker aux. contact: Pole L2 (>CB Aux. L2) 0 1 XCBR3.Pos.stVal device annunciation: 01 10 1 - ON 0 - OFF IEC Status Pos.stVal: 00 - INTERMEDIATE STATE 01 - OFF 10 - ON 11 - BAD STATE XCBR3.BlkOpn No. 55 Information Reset Device (Reset Device) XCBR3.BlkOpn.stVal device annunciation: 1 - ON 0 - OFF 1 0 0 1 IEC Status BlkOpn.stVal: 0 - FALSE 1 - TRUE XCBR3.BlkCls No. 55 Information Reset Device (Reset Device) XCBR3.BlkCls.stVal device annunciation: 1 - ON 0 - OFF 1 0 0 1 IEC Status BlkCls.stVal: 0 - FALSE 1 - TRUE XCBR3.CirSpv No. 6865 Information Failure Trip Circuit (FAIL: Trip cir.) XCBR3.CirSpv.stVal device annunciation: 1 - ON 0 - OFF 204 0 1 0 1 IEC Status CirSpv.stVal: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx) XCBR3.SumSwARs No. 1028 Information Value XCBR3.SumSwARs.actVal Accumulation of interrupted current L2 ( IL2 =) Metered value Current value of acummulated interrupted current = actVal x pulsQty XCBR3.SumSwARs.units.SIUnit 5 A (Ampere) XCBR3.SumSwARs.units.multiplier 3 Kilo 1.000000e-002 A / Metered value XCBR3.SumSwARs.pulsQty XCBR4.Mod No. 52 Information At Least 1 Protection Funct. is Active (ProtActive) XCBR4.Mod.stVal device annunciation: 1 0 1 5 1 - ON 0 - OFF IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF XCBR4.Health No. 51 Information Device is Operational and Protecting (Device OK) XCBR4.Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM XCBR4.Loc No. 55 Information Reset Device (Reset Device) XCBR4.Loc.stVal device annunciation: 1 0 1 0 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Loc.stVal: 0 - FALSE 1 - TRUE 205 Mapping 3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx) XCBR4.OpCnt No. 1003 Information Value Number of breaker TRIP commands L3 (TripNo L3=) XCBR4.OpCnt.stVal Metered value Absolute value XCBR4.Pos No. 353 Information >Circuit breaker aux. contact: Pole L3 (>CB Aux. L3) 0 1 XCBR4.Pos.stVal device annunciation: 01 10 1 - ON 0 - OFF IEC Status Pos.stVal: 00 - INTERMEDIATE STATE 01 - OFF 10 - ON 11 - BAD STATE XCBR4.BlkOpn No. 55 Information Reset Device (Reset Device) XCBR4.BlkOpn.stVal device annunciation: 1 - ON 0 - OFF 1 0 0 1 IEC Status BlkOpn.stval: 0 - FALSE 1 - TRUE XCBR4.BlkCls No. 55 Information Reset Device (Reset Device) XCBR4.BlkCls.stVal device annunciation: 1 - ON 0 - OFF 1 0 0 1 IEC Status BlkCls.stVal: 0 - FALSE 1 - TRUE XCBR4.CirSpv No. 6865 Information Failure Trip Circuit (FAIL: Trip cir.) XCBR4.CirSpv.stVal device annunciation: 1 - ON 0 - OFF 206 0 1 0 1 IEC Status CirSpv.stVal: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx) XCBR4.SumSwARs No. Information 1029 Accumulation of interrupted current L3 ( IL3 =) Value XCBR4.SumSwARs.actVal Metered value Current value of acummulated interrupted current = actVal x pulsQty XCBR4.SumSwARs.units.SIUnit 5 A (Ampere) XCBR4.SumSwARs.units.multiplier 3 Kilo 1.000000e-002 A / Metered value XCBR4.SumSwARs.pulsQty SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 207 Mapping 3.17 Tripping Logic of the Entire Device (PTRC1) 3.17 Tripping Logic of the Entire Device (PTRC1) PTRC1.Mod No. 52 Information At Least 1 Protection Funct. is Active (ProtActive) PTRC1.Mod.stVal device annunciation: 1 0 1 5 1 - ON 0 - OFF IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF PTRC1.Health No. 51 Information Device is Operational and Protecting (Device OK) PTRC1.Health.stVal device annunciation: 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM PTRC1.Str No. Information 501 Relay PICKUP (Relay PICKUP) 0 1 x x x x 503 Relay PICKUP Phase L1 (Relay PICKUP L1) 0 x 1 x x x 504 Relay PICKUP Phase L2 (Relay PICKUP L2) 0 x x 1 x x 505 Relay PICKUP Phase L3 (Relay PICKUP L3) 0 x x x 1 x 506 Relay PICKUP Earth (Relay PICKUP E) 0 x x x x 1 PTRC1.Str.general device annunciation: 208 0 1 1 1 1 1 1 - ON 0 - OFF X - irrelevant IEC Status Str.general: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.17 Tripping Logic of the Entire Device (PTRC1) PTRC1.Str.dirGeneral No. Information 3719 Distance Pickup FORWARD (Dis. forward) 0 1 0 1 0 0 0 1 1 x x 1358 E/F picked up FORWARD (EF forward) 0 0 1 1 0 0 0 x x 1 1 3720 Distance Pickup REVERSE (Dis. reverse) 0 0 0 0 1 0 1 1 x 1 x 1359 E/F picked up REVERSE (EF reverse) 0 0 0 0 0 1 1 x 1 x 1 PTRC1.Str.dirGeneral 0 1 1 1 2 2 2 3 3 3 3 device annunciation: 1 - ON 0 - OFF x - irrelevant IEC Status Str.dirGeneral: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH PTRC1.Str.phsA No. 503 Information Relay PICKUP Phase L1 (Relay PICKUP L1) PTRC1.Str.phsA device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsA: 0 - FALSE 1 - TRUE PTRC1.Str.phsB No. 504 Information Relay PICKUP Phase L2 (Relay PICKUP L2) PTRC1.Str.phsB device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.phsB: 0 - FALSE 1 - TRUE PTRC1.Str.phsC No. 505 Information Relay PICKUP Phase L3 (Relay PICKUP L3) PTRC1.Str.phsC device annunciation: 0 1 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status Str.phsC: 0 - FALSE 1 - TRUE 209 Mapping 3.17 Tripping Logic of the Entire Device (PTRC1) PTRC1.Str.neut No. 506 Information Relay PICKUP Earth (Relay PICKUP E) PTRC1.Str.neut device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Str.neut: 0 - FALSE 1 - TRUE PTRC1.Tr.dirGeneral No. Information 501 Relay PICKUP (Relay PICKUP) 0 1 x x x 507 Relay TRIP command Phase L1 (Relay TRIP L1) 0 x 1 x x 508 Relay TRIP command Phase L2 (Relay TRIP L2) 0 x x 1 x 509 Relay TRIP command Phase L3 (Relay TRIP L3) 0 x x x 1 PTRC1.Tr.dirGeneral device annunciation: 0 1 1 1 1 1 - ON 0 - OFF x - irrelevant IEC Status Tr.dirGeneral: 0 - UNKNOWN 1 - FORWARD 2 - BACKWARD 3 - BOTH PTRC1.Tr.phsA No. 507 Information Relay TRIP command Phase L1 (Relay TRIP L1) PTRC1.Tr.phsA device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Tr.phsA: 0 - FALSE 1 - TRUE PTRC1.Tr.phsB No. 508 Information Relay TRIP command Phase L2 (Relay TRIP L2) PTRC1.Tr.phsB device annunciation: 210 0 1 0 1 1 - ON 0 - OFF IEC Status Tr.phsB: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.17 Tripping Logic of the Entire Device (PTRC1) PTRC1.Tr.phsC No. 509 Information Relay TRIP command Phase L3 (Relay TRIP L3) PTRC1.Tr.phsC device annunciation: 0 1 0 1 1 - ON 0 - OFF IEC Status Tr.phsC: 0 - FALSE 1 - TRUE PTRC1.FinTr No. 536 Information Relay Definitive TRIP (Definitive TRIP) PTRC1.FinTr.stVal device annunciation: 0 1 0 1 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 IEC Status FinTr.stVal: 0 - FALSE 1 - TRUE 211 Mapping 3.18 Device (LPHD1, CALH1) 3.18 Device (LPHD1, CALH1) LPHD1.DevStr No. Information 56 Initial Start of Device (Initial Start) 0 0 1 1 67 Resume (Resume) 0 1 0 1 LPHD1.DevStr.stVal device annunciation: T 2 1 T 1 - ON 0 - OFF x - irrelevant IEC Status DevStr.stVal: 1 - Initial Start 2 - Resume T - toggel between 1 and 2 LPHD1.PhyHealth No. 51 Information Device is Operational and Protecting (Device OK) LPHD1.PhyHealth.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status PhyHealth.stVal: 1 - OK 2 - WARNING 3 - ALARM LPHD1.Proxy No. 55 Information Reset Device (Reset Device) LPHD1.Proxy.stVal device annunciation: 212 0 1 1 0 1 - ON 0 - OFF IEC Status Proxy.stVal: 0 - DEVICE is not a PROXY 1 - DEVICE is a PROXY SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.18 Device (LPHD1, CALH1) 3.18.1 Alarm-, Warn- and Group alarms (CALH1) CALH1.Mod No. 55 Information Reset Device (Reset Device) CALH1.Mod.stVal device annunciation: 1 0 1 5 1 - ON 0 - OFF IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF CALH1.Health No. 51 Information Device is Operational and Protecting (Device OK) CALH1.Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM CALH1.GrAlm No. 140 Information Error with a summary alarm (Error Sum Alarm) CALH1.GrAlm.stVal device annunciation: 1 - ON 0 - OFF 1 0 1 0 IEC Status GrAlm.stVal: 0 - FALSE 1 - TRUE CALH1.GrWrn No. 160 Information Alarm Summary Event (Alarm Sum Event) CALH1.GrWrn.stVal device annunciation: 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 1 0 1 0 IEC Status GrWrn.stVal: 0 - FALSE 1 - TRUE 213 Mapping 3.18 Device (LPHD1, CALH1) The LN CALH1.ErrBoard1 to CALH1.ErrBoard7 are available SIPROTEC 7SA with Firmware V04.65 and higher SIPROTEC 7SD with Firmware V04.61 and higher SIPROTEC 7VK with Firmware V04.60 and higher. CALH1.ErrBoard1 No. 183 Information Error Board 1 (Error Board 1) CALH1.ErrBoard1.stVal device annunciation: 1 - ON 0 - OFF 1 0 1 0 IEC Status ErrBoard1.stVal: 0 - FALSE 1 - TRUE CALH1.ErrBoard2 No. 184 Information Error Board 2 (Error Board 2) CALH1.ErrBoard2.stVal device annunciation: 1 - ON 0 - OFF 1 0 1 0 IEC Status ErrBoard2.stVal: 0 - FALSE 1 - TRUE CALH1.ErrBoard3 No. 185 Information Error Board 3 (Error Board 3) CALH1.ErrBoard3.stVal device annunciation: 1 - ON 0 - OFF 1 0 1 0 IEC Status ErrBoard3.stVal: 0 - FALSE 1 - TRUE CALH1.ErrBoard4 No. 186 Information Error Board 4 (Error Board 4) CALH1.ErrBoard4.stVal device annunciation: 214 1 - ON 0 - OFF 1 0 1 0 IEC Status ErrBoard4.stVal: 0 - FALSE 1 - TRUE SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.18 Device (LPHD1, CALH1) CALH1.ErrBoard5 No. 187 Information Error Board 5 (Error Board 5) CALH1.ErrBoard5.stVal device annunciation: 1 - ON 0 - OFF 1 0 1 0 IEC Status ErrBoard5.stVal: 0 - FALSE 1 - TRUE CALH1.ErrBoard6 No. 188 Information Error Board 6 (Error Board 6) CALH1.ErrBoard6.stVal device annunciation: 1 - ON 0 - OFF 1 0 1 0 IEC Status ErrBoard6.stVal: 0 - FALSE 1 - TRUE CALH1.ErrBoard7 No. 189 Information Error Board 7 (Error Board 7) CALH1.ErrBoard7.stVal device annunciation: 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 1 0 1 0 IEC Status ErrBoard7.stVal: 0 - FALSE 1 - TRUE 215 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) 3.19 Measurements (MMXUx, MSQI1, MMTR1) 3.19.1 Measured values of local device (MMXU1) MMXU1.Mod No. Information 51 Device is Operational and Protecting (Device OK) MMXU1.Mod.stVal device annunciation: 1 - ON 0 - OFF IEC Status Mod.stVal: 1 0 1 5 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF MMXU1.Health No. 51 Information Device is Operational and Protecting (Device OK) MMXU1.Health.stVal device annunciation: 216 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) MMXU1.TotW No. 641 Information P (active power) (P =) Value MMXU1.TotW.mag.f Measured value Absolute value MMXU1.TotW.units.SIUnit 62 W (Watt) MMXU1.TotW.units.multiplier 6 Mega Measured value Absolute value MMXU1.TotVAr.units.SIUnit 63 VAr MMXU1.TotVAr.units.multiplier 6 Mega Measured value Absolute value MMXU1.TotVA.units.SIUnit 61 VA MMXU1.TotVA.units.multiplier 6 Mega Measured value Absolute value MMXU1.TotPF.units.SIUnit 1 NONE MMXU1.TotPF.units.multiplier 0 1 Measured value Absolute value MMXU1.Hz.units.SIUnit 33 Hz MMXU1.Hz.units.multiplier 0 1 MMXU1.TotVAr No. 642 Information Q (reactive power) (Q =) Value MMXU1.TotVAr.mag.f MMXU1.TotVA No. 645 Information S (apparent power) (S =) Value MMXU1.TotVA.mag.f MMXU1.TotPF No. Information 643 cos PHI (Power factor) (cos phi =) Value MMXU1.TotPF.mag.f MMXU1.Hz No. 644 Information Frequency (Freq=) SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Value MMXU1.Hz.mag.f 217 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) MMXU1.A No. 601 Information I L1 (IL1 =) No. 602 MMXU1.A.phsA.cVal.mag.f Measured value Absolute value MMXU1.A.phsA.units.SIUnit 5 A (Ampere) MMXU1.A.phsA.units.multiplier 0 1 MMXU1.A.phsB.cVal.mag.f Measured value Absolute value MMXU1.A.phsB.units.SIUnit 5 A (Ampere) MMXU1.A.phsB.units.multiplier 0 1 MMXU1.A.phsC.cVal.mag.f Measured value Absolute value MMXU1.A.phsC.units.SIUnit 5 A (Ampere) MMXU1.A.phsC.units.multiplier 0 1 MMXU1.PPV.phsAB.cVal.mag.f Measured value Absolute value MMXU1.PPV.phsAB.units.SIUnit 29 V (Volt) MMXU1.PPV.phsAB.units.multiplier 3 Kilo MMXU1.PPV.phsBC.cVal.mag.f Measured value Absolute value MMXU1.PPV.phsBC.units.SIUnit 29 V (Volt) MMXU1.PPV.phsBC.units.multiplier 3 Kilo MMXU1.PPV.phsCA.cVal.mag.f Measured value Absolute value MMXU1.PPV.phsCA.units.SIUnit 29 V (Volt) MMXU1.PPV.phsCA.units.multiplier 3 Kilo Information I L2 (IL2 =) No. 603 Value Value Information I L3 (IL3 =) Value MMXU1.PPV No. 624 No. 625 No. 626 218 Information U L12 (UL12=) Value Information U L23 (UL23=) Value Information U L31 (UL31=) Value SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) MMXU1.PhV No. 621 No. 622 No. 623 No. 627 Information U L1-E (UL1E=) Value MMXU1.PhV.phsA.cVal.mag.f Measured value Absolute value MMXU1.PhV.phsA.units.SIUnit 29 V (Volt) MMXU1.PhV.phsA.units.multiplier 3 Kilo MMXU1.PhV.phsB.cVal.mag.f Measured value Absolute value MMXU1.PhV.phsB.units.SIUnit 29 V (Volt) MMXU1.PhV.phsB.units.multiplier 3 Kilo MMXU1.PhV.phsC.cVal.mag.f Measured value Absolute value MMXU1.PhV.phsC.units.SIUnit 29 V (Volt) MMXU1.PhV.phsC.units.multiplier 3 Kilo MMXU1.PhV.neut.cVal.mag.f Measured value Absolute value MMXU1.PhV.neut.units.SIUnit 29 V (Volt) MMXU1.PhV.neut.units.multiplier 3 Kilo Information U L2-E (UL2E=) Value Information U L3-E (UL3E=) Value Information Uen (Uen =) SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Value 219 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) 3.19.2 Remote measured values of relay 1 (MMXU2) MMXU2.Mod No. 3491 Information Relay 1 in Login state (Rel1 Login) MMXU2.Mod.stVal device annunciation: 0 1 5 1 1 - ON 0 - OFF IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF MMXU2.Health No. 51 Information Device is Operational and Protecting (Device OK) MMXU2.Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM MMXU2.Relld No. Information 7761 Relay ID of 1. relay (Relay ID) 220 Value MMXU2.RelId.stVal Parameter 4701 Device address SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) MMXU2.A No. 7762 7763 No. 7764 7765 No. 7766 7767 Information IL1(% of Operational nominal current) (IL1_opN=) Angle IL1_rem <-> IL1_loc (I L1=) Value MMXU2.A.phsA.cVal.mag.f Measured value Absolute value MMXU2.A.phsA.units.SIUnit 1 NONE MMXU2.A.phsA.units.multiplier 0 1 Measured value Phase angle in MMXU2.A.phsA.cVal.ang.f Information IL2(% of Operational nominal current) (IL2_opN=) Angle IL2_rem <-> IL2_loc (I L2=) Value MMXU2.A.phsB.cVal.mag.f Measured value Absolute value MMXU2.A.phsB.units.SIUnit 1 NONE MMXU2.A.phsB.units.multiplier 0 1 Measured value Phase angle in MMXU2.A.phsB.cVal.ang.f Information IL3(% of Operational nominal current) (IL3_opN=) Angle IL3_rem <-> IL3_loc (I L3=) SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Value MMXU2.A.phsC.cVal.mag.f Measured value Absolute value MMXU2.A.phsC.units.SIUnit 1 NONE MMXU2.A.phsC.units.multiplier 0 1 Measured value Phase angle in MMXU2.A.phsC.cVal.ang.f 221 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) MMXU2.PhV No. Information 7769 UL1(% of Operational nominal voltage) (UL1_opN=) 7770 Angle UL1_rem <-> UL1_loc (U L1=) No. Information 7771 UL2(% of Operational nominal voltage) (UL2_opN=) 7772 Angle UL2_rem <-> UL2_loc (U L2=) No. Information 7773 UL3(% of Operational nominal voltage) (UL3_opN=) 7774 222 Angle UL3_rem <-> UL3_loc (U L3=) Value MMXU2.PhV.phsA.cVal.mag.f Measured value Absolute value MMXU2. PhV.phsA.units.SIUnit 29 V (Volt) MMXU2. PhV.phsA.units.multiplier 3 Kilo Measured value Phase angle in MMXU2. PhV.phsA.cVal.ang.f Value MMXU2.PhV.phsB.cVal.mag.f Measured value Absolute value MMXU2. PhV.phsB.units.SIUnit 29 V (Volt) MMXU2. PhV.phsB.units.multiplier 3 Kilo Measured value Phase angle in MMXU2. PhV.phsB.cVal.ang.f Value MMXU2.PhV.phsC.cVal.mag.f Measured value Absolute value MMXU2. PhV.phsC.units.SIUnit 29 V (Volt) MMXU2. PhV.phsC.units.multiplier 3 Kilo Measured value Phase angle in MMXU2. PhV.phsC.cVal.ang.f SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) 3.19.3 Remote measured values of relay 2 (MMXU3) MMXU3.Mod No. 3492 Information Relay 2 in Login state (Rel2 Login) MMXU3.Mod.stVal device annunciation: 0 1 5 1 1 - ON 0 - OFF IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF MMXU3.Health No. 51 Information Device is Operational and Protecting (Device OK) MMXU3.Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM MMXU3.Relld No. 7781 Information Relay ID of 2. relay (Relay ID) SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Value MMXU3.RelId.stVal Parameter 4702 Device address 223 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) MMXU3.A No. 7782 7783 No. 7784 7785 No. 7786 7787 224 Information IL1(% of Operational nominal current) (IL1_opN=) Angle IL1_rem <-> IL1_loc (I L1=) Value MMXU3.A.phsA.cVal.mag.f Measured value Absolute value MMXU3.A.phsA.units.SIUnit 1 NONE MMXU3.A.phsA.units.multiplier 0 1 Measured value Phase angle in MMXU3.A.phsA.cVal.ang.f Information IL2(% of Operational nominal current) (IL2_opN=) Angle IL2_rem <-> IL2_loc (I L2=) Value MMXU3.A.phsB.cVal.mag.f Measured value Absolute value MMXU3.A.phsB.units.SIUnit 1 NONE MMXU3.A.phsB.units.multiplier 0 1 Measured value Phase angle in MMXU3.A.phsB.cVal.ang.f Information IL3(% of Operational nominal current) (IL3_opN=) Angle IL3_rem <-> IL3_loc (I L3=) Value MMXU3.A.phsC.cVal.mag.f Measured value Absolute value MMXU3.A.phsC.units.SIUnit 1 NONE MMXU3.A.phsC.units.multiplier 0 1 Measured value Phase angle in MMXU3.A.phsC.cVal.ang.f SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) MMXU3.PhV No. Information 7789 UL1(% of Operational nominal voltage) (UL1_opN=) 7790 Angle UL1_rem <-> UL1_loc (U L1=) No. Information 7791 UL2(% of Operational nominal voltage) (UL2_opN=) 7792 Angle UL2_rem <-> UL2_loc (U L2=) No. Information 7793 UL3(% of Operational nominal voltage) (UL3_opN=) 7794 Angle UL3_rem <-> UL3_loc (U L3=) SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Value MMXU3.PhV.phsA.cVal.mag.f Measured value Absolute value MMXU3. PhV.phsA.units.SIUnit 29 V (Volt) MMXU3. PhV.phsA.units.multiplier 3 Kilo Measured value Phase angle in MMXU3. PhV.phsA.cVal.ang.f Value MMXU3.PhV.phsB.cVal.mag.f Measured value Absolute value MMXU3. PhV.phsB.units.SIUnit 29 V (Volt) MMXU3. PhV.phsB.units.multiplier 3 Kilo Measured value Phase angle in MMXU3. PhV.phsB.cVal.ang.f Value MMXU3.PhV.phsC.cVal.mag.f Measured value Absolute value MMXU3. PhV.phsC.units.SIUnit 29 V (Volt) MMXU3. PhV.phsC.units.multiplier 3 Kilo Measured value Phase angle in MMXU3. PhV.phsC.cVal.ang.f 225 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) 3.19.4 Remote measured values of relay 3 (MMXU4) MMXU4.Mod No. 3493 Information Relay 3 in Login state (Rel3 Login) MMXU4.Mod.stVal device annunciation: 0 1 5 1 1 - ON 0 - OFF IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF MMXU4.Health No. 51 Information Device is Operational and Protecting (Device OK) MMXU4.Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM MMXU4.Relld No. Information 7801 Relay ID of 3. relay (Relay ID) 226 Value MMXU4.RelId.stVal Parameter 4703 Device address SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) MMXU4.A No. 7802 7803 No. 7804 7805 No. 7806 7807 Information IL1(% of Operational nominal current) (IL1_opN=) Angle IL1_rem <-> IL1_loc (I L1=) Value MMXU4.A.phsA.cVal.mag.f Measured value Absolute value MMXU4.A.phsA.units.SIUnit 1 NONE MMXU4.A.phsA.units.multiplier 0 1 Measured value Phase angle in MMXU4.A.phsA.cVal.ang.f Information IL2(% of Operational nominal current) (IL2_opN=) Angle IL2_rem <-> IL2_loc (I L2=) Value MMXU4.A.phsB.cVal.mag.f Measured value Absolute value MMXU4.A.phsB.units.SIUnit 1 NONE MMXU4.A.phsB.units.multiplier 0 1 Measured value Phase angle in MMXU4.A.phsB.cVal.ang.f Information IL3(% of Operational nominal current) (IL3_opN=) Angle IL3_rem <-> IL3_loc (I L3=) SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Value MMXU4.A.phsC.cVal.mag.f Measured value Absolute value MMXU4.A.phsC.units.SIUnit 1 NONE MMXU4.A.phsC.units.multiplier 0 1 Measured value Phase angle in MMXU4.A.phsC.cVal.ang.f 227 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) MMXU4.PhV No. Information 7809 UL1(% of Operational nominal voltage) (UL1_opN=) 7810 Angle UL1_rem <-> UL1_loc (U L1=) No. Information 7811 UL2(% of Operational nominal voltage) (UL2_opN=) 7812 Angle UL2_rem <-> UL2_loc (U L2=) No. Information 7813 UL3(% of Operational nominal voltage) (UL3_opN=) 7814 228 Angle UL3_rem <-> UL3_loc (U L3=) Value MMXU4.PhV.phsA.cVal.mag.f Measured value Absolute value MMXU4.PhV.phsA.units.SIUnit 29 V (Volt) MMXU4.PhV.phsA.units.multiplier 3 Kilo Measured value Phase angle in MMXU4.PhV.phsA.cVal.ang.f Value MMXU4.PhV.phsB.cVal.mag.f Measured value Absolute value MMXU4.PhV.phsB.units.SIUnit 29 V (Volt) MMXU4.PhV.phsB.units.multiplier 3 Kilo Measured value Phase angle in MMXU4.PhV.phsB.cVal.ang.f Value MMXU4.PhV.phsC.cVal.mag.f Measured value Absolute value MMXU4.PhV.phsC.units.SIUnit 29 V (Volt) MMXU4. PhV.phsC.units.multiplier 3 Kilo Measured value Phase angle in MMXU4. PhV.phsC.cVal.ang.f SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) 3.19.5 Remote measured values of relay 4 (MMXU5) MMXU5.Mod No. 3494 Information Relay 4 in Login state (Rel4 Login) MMXU5Mod.stVal device annunciation: 0 1 5 1 1 - ON 0 - OFF IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF MMXU5.Health No. 51 Information Device is Operational and Protecting (Device OK) MMXU5Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM MMXU5.Relld No. Information 7821 Relay ID of 4. relay (Relay ID) SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Value MMXU5RelId.stVal Parameter 4704 Device address 229 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) MMXU5.A No. 7822 7823 No. 7824 7825 No. 7826 7827 230 Information IL1(% of Operational nominal current) (IL1_opN=) Angle IL1_rem <-> IL1_loc (I L1=) Value MMXU5A.phsA.cVal.mag.f Measured value Absolute value MMXU5A.phsA.units.SIUnit 1 NONE MMXU5A.phsA.units.multiplier 0 1 Measured value Phase angle in MMXU5A.phsA.cVal.ang.f Information IL2(% of Operational nominal current) (IL2_opN=) Angle IL2_rem <-> IL2_loc (I L2=) Value MMXU5A.phsB.cVal.mag.f Measured value Absolute value MMXU5A.phsB.units.SIUnit 1 NONE MMXU5A.phsB.units.multiplier 0 1 Measured value Phase angle in MMXU5A.phsB.cVal.ang.f Information IL3(% of Operational nominal current) (IL3_opN=) Angle IL3_rem <-> IL3_loc (I L3=) Value MMXU5A.phsC.cVal.mag.f Measured value Absolute value MMXU5A.phsC.units.SIUnit 1 NONE MMXU5A.phsC.units.multiplier 0 1 Measured value Phase angle in MMXU5A.phsC.cVal.ang.f SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) MMXU5.PhV No. Information 7829 UL1(% of Operational nominal voltage) (UL1_opN=) 7830 Angle UL1_rem <-> UL1_loc (U L1=) No. Information 7831 UL2(% of Operational nominal voltage) (UL2_opN=) 7832 Angle UL2_rem <-> UL2_loc (U L2=) No. Information 7833 UL3(% of Operational nominal voltage) (UL3_opN=) 7834 Angle UL3_rem <-> UL3_loc (U L3=) SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Value MMXU5.PhV.phsA.cVal.mag.f Measured value Absolute value MMXU5.PhV.phsA.units.SIUnit 29 V (Volt) MMXU5.PhV.phsA.units.multiplier 3 Kilo Measured value Phase angle in MMXU5.PhV.phsA.cVal.ang.f Value MMXU5.PhV.phsB.cVal.mag.f Measured value Absolute value MMXU5.PhV.phsB.units.SIUnit 29 V (Volt) MMXU5.PhV.phsB.units.multiplier 3 Kilo Measured value Phase angle in MMXU5.PhV.phsB.cVal.ang.f Value MMXU5.PhV.phsC.cVal.mag.f Measured value Absolute value MMXU5.PhV.phsC.units.SIUnit 29 V (Volt) MMXU5. PhV.phsC.units.multiplier 3 Kilo Measured value Phase angle in MMXU5. PhV.phsC.cVal.ang.f 231 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) 3.19.6 Remote measured values of relay 5 (MMXU6) MMXU6.Mod No. 3495 Information Relay 5 in Login state (Rel5 Login) MMXU6.Mod.stVal device annunciation: 0 1 5 1 1 - ON 0 - OFF IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF MMXU6.Health No. 51 Information Device is Operational and Protecting (Device OK) MMXU6.Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM MMXU6.Relld No. Information 7841 Relay ID of 5. relay (Relay ID) 232 Value MMXU6.RelId.stVal Parameter 4705 Device address SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) MMXU6.A No. 7842 7843 No. 7844 7845 No. 7846 7847 Information IL1(% of Operational nominal current) (IL1_opN=) Angle IL1_rem <-> IL1_loc (I L1=) Value MMXU6.A.phsA.cVal.mag.f Measured value Absolute value MMXU6.A.phsA.units.SIUnit 1 NONE MMXU6.A.phsA.units.multiplier 0 1 Measured value Phase angle in MMXU6.A.phsA.cVal.ang.f Information IL2(% of Operational nominal current) (IL2_opN=) Angle IL2_rem <-> IL2_loc (I L2=) Value MMXU6.A.phsB.cVal.mag.f Measured value Absolute value MMXU6.A.phsB.units.SIUnit 1 NONE MMXU6.A.phsB.units.multiplier 0 1 Measured value Phase angle in MMXU6.A.phsB.cVal.ang.f Information IL3(% of Operational nominal current) (IL3_opN=) Angle IL3_rem <-> IL3_loc (I L3=) SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Value MMXU6.A.phsC.cVal.mag.f Measured value Absolute value MMXU6.A.phsC.units.SIUnit 1 NONE MMXU6.A.phsC.units.multiplier 0 1 Measured value Phase angle in MMXU6.A.phsC.cVal.ang.f 233 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) MMXU6.PhV No. Information 7849 UL1(% of Operational nominal voltage) (UL1_opN=) 7850 Angle UL1_rem <-> UL1_loc (U L1=) No. Information 7851 UL2(% of Operational nominal voltage) (UL2_opN=) 7852 Angle UL2_rem <-> UL2_loc (U L2=) No. Information 7853 UL3(% of Operational nominal voltage) (UL3_opN=) 7854 234 Angle UL3_rem <-> UL3_loc (U L3=) Value MMXU6.PhV.phsA.cVal.mag.f Measured value Absolute value MMXU6.PhV.phsA.units.SIUnit 29 V (Volt) MMXU6.PhV.phsA.units.multiplier 3 Kilo Measured value Phase angle in MMXU6.PhV.phsA.cVal.ang.f Value MMXU6.PhV.phsB.cVal.mag.f Measured value Absolute value MMXU6.PhV.phsB.units.SIUnit 29 V (Volt) MMXU6.PhV.phsB.units.multiplier 3 Kilo Measured value Phase angle in MMXU6.PhV.phsB.cVal.ang.f Value MMXU6.PhV.phsC.cVal.mag.f Measured value Absolute value MMXU6.PhV.phsC.units.SIUnit 29 V (Volt) MMXU6. PhV.phsC.units.multiplier 3 Kilo Measured value Phase angle in MMXU6. PhV.phsC.cVal.ang.f SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) 3.19.7 Remote measured values of relay 6 (MMXU7) MMXU7.Mod No. 3496 Information Relay 6 in Login state (Rel6 Login) MMXU7.Mod.stVal device annunciation: 0 1 5 1 1 - ON 0 - OFF IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF MMXU7.Health No. 51 Information Device is Operational and Protecting (Device OK) MMXU7.Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM MMXU7.Relld No. Information 7861 Relay ID of 6. relay (Relay ID) SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Value MMXU7.RelId.stVal Parameter 4706 Device address 235 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) MMXU7.A No. 7862 7863 No. 7864 7865 No. 7866 7867 236 Information IL1(% of Operational nominal current) (IL1_opN=) Angle IL1_rem <-> IL1_loc (I L1=) Value MMXU7.A.phsA.cVal.mag.f Measured value Absolute value MMXU7.A.phsA.units.SIUnit 1 NONE MMXU7.A.phsA.units.multiplier 0 1 Measured value Phase angle in MMXU7.A.phsA.cVal.ang.f Information IL2(% of Operational nominal current) (IL2_opN=) Angle IL2_rem <-> IL2_loc (I L2=) Value MMXU7.A.phsB.cVal.mag.f Measured value Absolute value MMXU7.A.phsB.units.SIUnit 1 NONE MMXU7.A.phsB.units.multiplier 0 1 Measured value Phase angle in MMXU7.A.phsB.cVal.ang.f Information IL3(% of Operational nominal current) (IL3_opN=) Angle IL3_rem <-> IL3_loc (I L3=) Value MMXU7.A.phsC.cVal.mag.f Measured value Absolute value MMXU7.A.phsC.units.SIUnit 1 NONE MMXU7.A.phsC.units.multiplier 0 1 Measured value Phase angle in MMXU7.A.phsC.cVal.ang.f SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) MMXU7.PhV No. Information 7869 UL1(% of Operational nominal voltage) (UL1_opN=) 7870 Angle UL1_rem <-> UL1_loc (U L1=) No. Information 7871 UL2(% of Operational nominal voltage) (UL2_opN=) 7872 Angle UL2_rem <-> UL2_loc (U L2=) No. Information 7873 UL3(% of Operational nominal voltage) (UL3_opN=) 7874 Angle UL3_rem <-> UL3_loc (U L3=) SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Value MMXU7.PhV.phsA.cVal.mag.f Measured value Absolute value MMXU7.PhV.phsA.units.SIUnit 29 V (Volt) MMXU7.PhV.phsA.units.multiplier 3 Kilo Measured value Phase angle in MMXU7.PhV.phsA.cVal.ang.f Value MMXU7.PhV.phsB.cVal.mag.f Measured value Absolute value MMXU7.PhV.phsB.units.SIUnit 29 V (Volt) MMXU7.PhV.phsB.units.multiplier 3 Kilo Measured value Phase angle in MMXU7.PhV.phsB.cVal.ang.f Value MMXU7.PhV.phsC.cVal.mag.f Measured value Absolute value MMXU7.PhV.phsC.units.SIUnit 29 V (Volt) MMXU7. PhV.phsC.units.multiplier 3 Kilo Measured value Phase angle in MMXU7. PhV.phsC.cVal.ang.f 237 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) 3.19.8 Measured values, symmetrical components (MSQI1) MSQI1.Mod No. Information 51 Device is Operational and Protecting (Device OK) MSQI1.Mod.stVal device annunciation: 1 0 1 5 1 - ON 0 - OFF IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF MSQI1.Health No. 51 Information Device is Operational and Protecting (Device OK) MSQI1.Health.stVal device annunciation: 238 0 1 3 1 1 - ON 0 - OFF IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) MSQI1.SeqA No. 619 Information I1 (positive sequence) (I1 No. 620 =) MSQI1.SeqA.c1.cVal.mag.f Measured value Absolute value MSQI1.SeqA.c1.units.SIUnit 5 A (Ampere) MSQI1.SeqA.c1.units.multiplier 0 1 MSQI1.SeqA.c2.cVal.mag.f Measured value Absolute value MSQI1.SeqA.c2.units.SIUnit 5 A (Ampere) MSQI1.SeqA.c2.units.multiplier 0 1 MSQI1.SeqA.c3.cVal.mag.f Measured value Absolute value MSQI1.SeqA.c3.units.SIUnit 5 A (Ampere) MSQI1.SeqA.c3.units.multiplier 0 1 Information I2 (negative sequence) (I2 No. 610 Value Value =) Information Value 3I0 (zero sequence) (3I0 =) MSQI1.SeqV No. 634 No. 635 No. 684 Information U1 (positive sequence) (U1 Value =) MSQI1.SeqV.c1.cVal.mag.f Measured value Absolute value MSQI1.SeqV.c1.units.SIUnit 29 V (Volt) MSQI1.SeqV.c1.units.multiplier 3 Kilo Information U2 (negative sequence) (U2 Value =) MSQI1.SeqV.c2.cVal.mag.f Measured value Absolute value MSQI1.SeqV.c2.units.SIUnit 29 V (Volt) MSQI1.SeqV.c2.units.multiplier 3 Kilo Information U0 (zero sequence) (U0 =) SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Value MSQI1.SeqV.c3.cVal.mag.f Measured value Absolute value MSQI1.SeqV.c3.units.SIUnit 29 V (Volt) MSQI1.SeqV.c3.units.multiplier 3 Kilo 239 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) 3.19.9 Power Metering (MMTR1) MMTR1.Mod No. 51 Information Device is Operational and Protecting (Device OK) 1 0 MMTR1.Mod.stVal device annunciation: 1 5 1 - ON 0 - OFF IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF MMTR1.Health No. 51 Information Device is Operational and Protecting (Device OK) 0 1 MMTR1.Health.stVal device annunciation: 1 - ON 0 - OFF 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM MMTR1.SupWh No. 924 Information Value Wp Forward (Wp+=) MMTR1.SupWh.actVal Metered value Current value of acummulated interrupted current = actVal x pulsQty MMTR1.SupWh.units.SIUnit 72 Wh MMTR1.SupWh.units.multiplier 9 Giga 1.154700e-005 Wh / Metered value MMTR1.SupWh.pulsQty 240 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.19 Measurements (MMXUx, MSQI1, MMTR1) MMTR1.SupVArh No. 925 Information Value Wq Forward (Wq+=) MMTR1.SupVArh.actVal Metered value Current value of acummulated interrupted current = actVal x pulsQty MMTR1.SupVArh.units.SIUnit 73 VArh MMTR1.SupVArh.units.multiplier 9 Giga 1.154700e-005 VArh / Metered value MMTR1.SupVArh.pulsQty MMTR1.DmdWh No. Information 928 Wp Reverse (Wp-=) Value MMTR1.DmdWh.actVal Metered value Current value of acummulated interrupted current = actVal x pulsQty MMTR1.DmdWh.units.SIUnit 72 Wh MMTR1.DmdWh.units.multiplier 9 Giga 1.154700e-005 Wh / Metered value MMTR1.DmdWh.pulsQty MMTR1.DmdVArh No. Information 929 Wq Reverse (Wq-=) Value MMTR1.DmdVArh.actVal Metered value Current value of acummulated interrupted current = actVal x pulsQty MMTR1.DmdVArh.units.SIUnit 73 VArh MMTR1.DmdVArh.units.multiplier 9 Giga 1.154700e-005 VArh / Metered value MMTR1.DmdVArh.pulsQty SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 241 Mapping 3.20 Oscillographic Fault Records (RDRE1) 3.20 Oscillographic Fault Records (RDRE1) RDRE1.Mod No. Information 51 Device is Operational and Protecting (Device OK) RDRE1.Mod.stVal device annunciation: 0 1 5 1 1 - ON 0 - OFF IEC Status Mod.stVal: 1 - ON 2 - BLOCKED 3 - TEST 4 - TEST/BLOCKED 5 - OFF RDRE1.Health No. 51 Information Device is Operational and Protecting (Device OK) RDRE1.Health.stVal device annunciation: 1 - ON 0 - OFF 0 1 3 1 IEC Status Health.stVal: 1 - OK 2 - WARNING 3 - ALARM RDRE1.RcdMade No. 30053 Information Fault recording is running (Fault rec. run.) RDRE1.RcdMade.stVal device annunciation: 242 1 - ON 0 - OFF 0 1 1 0 IEC Status RcdMade.stVal: 0 - FALSE 1 - TRUE (Recording complete) SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Mapping 3.20 Oscillographic Fault Records (RDRE1) RDRE1.FltNum No. 302 Information Value Fault Event (Fault Event) RDRE1.FltNum.stVal Present fault number RDRE1.GriFltNum No. 301 Information Value Power System fault (Pow.Sys.Flt.) RDRE1.GriFltNum.stVal Network fault number RDRE1.RcdStr No. 30053 Information Fault recording is running (Fault rec. run.) RDRE1.RcdStr.stVal device annunciation: 1 - ON 0 - OFF SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 0 1 0 1 IEC Status RcdStr.stVal: 0 - FALSE 1 - TRUE 243 Mapping 3.20 Oscillographic Fault Records (RDRE1) 244 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Literature /1/ SIPROTEC 4 Ethernet Module EN 100 IEC 61850 Electrical/optical Interface 100 MBit, Manual C53000-G1176-C167 /2/ SIPROTEC 4 System Description E50417-H1176-C151 /3/ SIPROTEC DIGSI, StartUP E50417-G1176-C152 /4/ DIGSI CFC, Manual E50417-H1176-C098 /5/ SIPROTEC SIGRA 4, Manual E50417-H1176-C1100-C070 /6/ SIPROTEC Distance Protection 7SA6, Manual C53000-G1176-C156 /7/ SIPROTEC Distance Protection 7SA522, Manual C53000-G1176-C155 /8/ SIPROTEC Line Differential Protection with Distance Protection 7SD5, Manual C5300-G1176-C169 /9/ SIPROTEC Differential Protection 7SD610, Manual C5300-G1176-C145 /10/ SIPROTEC Breaker Management Relay7VK61, Manual C5300-G1176-C159 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 245 246 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C186-3, Edition 11.2007 Index C CALH1 34, 57, 213 ErrBoard1 214 ErrBoard2 214 ErrBoard3 214 ErrBoard4 214 ErrBoard5 215 ErrBoard6 215 ErrBoard7 215 GrAlm 213 GrWrn 213 Health 213 Mod 213 D DAI 33 DOI 33 F Function parameters 34 Functional Scope 7SA522 39 7SA6 35 7SD5 43 7SD610 48 7VK61 51 L LD CTRL (Control) 34, 57 DR (Disturbance Recorder) 34 DR (Disturbance recorder) 57 EXT (Extended) 57 Logical Device 32 MEAS (Measurement) 34, 56 PROT (Protection) 34, 54 LLN0 32, 34, 54, 56, 57 Beh 58, 59 Mod 58, 59 Logical Node 33, 35, 39, 43, 48, 51, 54 LPHD1 32, 34, 56, 57, 212 DevStr 212 PhyHealth 212 Proxy 212 M MMTR1 34, 56, 240 DmdVArh 241 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C1863, Edition 11.2007 DmdWh 241 Health 240 Mod 240 SupVArh 241 SupWh 240 MMXU1 34, 56, 216 Health 216 Hz 217 Mod 216 PhV 219 PPV 218 TotPF 217 TotVA 217 TotVAr 217 TotW 217 MMXU2 46, 47, 50, 220 A 221 Health 220 Mod 220 PhV 222 Relld 220 MMXU3 47, 50, 223 A 224 Health 223 Mod 223 PhV 225 Relld 223 MMXU4 47, 226 A 227 Health 226 Mod 226 PhV 228 Relld 226 MMXU5 47, 229 A 230 Health 229 Mod 229 PhV 231 Relld 229 MMXU6 47, 232 A 233 Health 232 Mod 232 PhV 234 Relld 232 MMXU7 46, 47, 235 A 236 Health 235 247 Mod 235 PhV 237 Relld 235 MSQI1 34, 56, 238 Health 238 Mod 238 SeqA 239 SeqV 239 P PDIF1 43, 48, 54, 64 Health 64 Mod 64 Op 65 Str 64 PDIF2 65 Health 65 Mod 65 Op 66 Str 66 PDIF3 46, 50, 135 DifAClc 136 Health 135 Mod 135 Op 136 Str 136 Str.dirGeneral 136 PDIS1 39, 43, 54, 74 Health 74 Mod 74 Op 77 Op.phsA 77 Op.phsB 77 Op.phsC 78 Str 75 Str.dirGeneral 76 StrAB 79 StrAG 78 StrBC 79 StrBG 78 StrCA 79 StrCG 78 PDIS10 80 Health 80 Mod 80 Op 83 Op.phsA 83 Op.phsB 83 Op.phsC 84 Str 81 Str.dirGeneral 82 StrAB 85 StrAG 84 StrBC 85 StrBG 84 StrCA 85 StrCG 84 PDIS2 54, 86 248 Health 86 Mod 86 Op 87 Op.phsA 87 Op.phsB 88 Op.phsC 88 Str 86 Str.dirGeneral 87 PDIS3 89 Health 89 Mod 89 Op 90 Op.phsA 91 OP.phsB 91 OP.phsC 91 Str 90 Str.dirGeneral 90 PDIS4 92 Health 92 Mod 92 Op 93 Op.phsA 94 Op.phsB 94 Op.phsC 94 Str 92 Str.dirGeneral 93 PDIS5 95 Health 95 Mod 95 Op 96 Op.phsA 97 Op.phsB 97 Op.phsC 97 Str 95 Str.dirGeneral 96 PSCH1 35, 39, 44, 54, 116 Echo 120 GrdRx 122 Health 116 LosOfGrd 120 Mod 116 Op 118 Op.CarRx 120 Op.phsA 119 Op.phsB 119 Op.phsC 119 ProRx 117 ProTx 116 RvABlk 122 Str 117 Str.phsA 117 Str.phsB 117 Str.phsC 118 WeiOp.general 121 WeiOp.phsA 121 WeiOp.phsB 121 WeiOp.phsC 121 PSDE1 36, 131 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C1863, Edition 11.2007 Health 131 Mod 131 Op 134 Str 131 Str.dirGeneral 132 Str.dirPhsA 132 Str.dirPhsB 133 Str.dirPhsC 134 Str.phsA 132 Str.phsB 133 Str.phsC 133 PTOC1 36, 55, 137 Health 137 Mod 137 Op 138 Str 137 PTOC10 55, 145 Health 145 Mod 145 Op 146 Str 146 Str.dirGeneral 146 PTOC2 40, 44, 48, 51, 55, 138 Health 138 Mod 138 Op 139 Str 139 PTOC3 36, 139 Health 140 Mod 139 Op 140 Str 140 PTOC4 141 Health 141 Mod 141 Op 142 Str 142 PTOC5 36, 40, 44, 55, 123 Health 123 Mod 123 Op 124 Str 123 Str.dirGeneral 124 PTOC6 125 Health 125 Mod 125 Op 126 Str 125 Str.dirGeneral 126 PTOC7 127 Health 127 Mod 127 Op 128 Str 127 Str.dirGeneral 128 PTOC8 129 Health 129 Mod 129 Op 130 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C1863, Edition 11.2007 Str 129 Str.dirGeneral 130 PTOC9 55, 143 Health 143 Mod 143 Op 144 Str 144 Str.dirGeneral 144 PTOF1 37, 41, 45, 49, 55, 184 Health 184 Mod 184 Op 185 Str 185 PTOF2 186 Health 186 Mod 186 Op 187 Str 187 PTOF3 188 Health 188 Mod 188 Op 189 Str 189 PTOF4 190 Health 190 Mod 190 Op 191 Str 191 PTOV1 37, 41, 45, 49, 52, 55, 162 Health 162 Mod 162 Op 163 Str 162 Str.phsA 163 Str.phsB 163 Str.phsC 163 PTOV10 175 Health 175 Mod 175 Op 175 Str 175 PTOV2 164 Health 164 Mod 164 Op 165 Str 164 Str.phsA 165 Str.phsB 165 Str.phsC 165 PTOV3 166 Health 166 Mod 166 Op 167 Str 166 Str.phsA 167 Str.phsB 167 Str.phsC 167 PTOV4 168 Health 168 249 Mod 168 Op 169 Str 168 Str.phsA 169 Str.phsB 169 Str.phsC 169 PTOV5 170 Health 170 Mod 170 Op 170 Str 170 PTOV6 171 Health 171 Mod 171 Op 171 Str 171 PTOV7 172 Health 172 Mod 172 Op 172 Str 172 PTOV8 173 Health 173 Mod 173 Op 173 Str 173 PTOV9 174 Health 174 Mod 174 Op 174 Str 174 PTRC1 208 FinTr 211 Health 208 Mod 208 Str 208 Str.dirGeneral 209 Str.neut 210 Str.phsA 209 Str.phsB 209 Str.phsC 209 Tr.dirGeneral 210 Tr.phsA 210 Tr.phsB 210 Tr.phsC 211 PTRC2 34, 35, 39, 43, 54, 98 Health 98 Mod 98 Op 101 Op.phsA 102 Op.phsB 102 Op.phsC 102 Str 98 Str.dirGeneral 99 Str.dirPhsA 99 Str.dirPhsB 100 Str.dirPhsC 101 Str.neut 101 Str.phsA 99, 100, 101 250 Str.phsB 100, 101 Str.phsC 101 PTRC3 54, 67 Health 67 Mod 67 Op 69 Op.phsA 70 Op.phsB 70 Op.phsC 70 Str 67 Str.dirGeneral 68 Str.dirNeut 69 Str.dirPhsA 68 Str.dirPhsB 68 Str.dirPhsC 69 Str.neut 69 Str.phsA 68 Str.phsB 68 Str.phsC 69 StrA 70 StrAB 72 StrABC 72 StrABCG 73 StrABG 73 StrAG 71 StrB 71 StrBC 72 StrBCG 73 StrBG 71 StrC 71 StrCA 72 StrCAG 73 StrCG 71 PTTR1 38, 46, 50, 55, 196 AlmThm 197 Health 196 Mod 196 Op 196 Str 196 PTUF1 37, 41, 45, 49, 55, 176 Health 176 Mod 176 Op 177 Str 177 PTUF2 178 Health 178 Mod 178 Op 179 Str 179 PTUF3 180 Health 180 Mod 180 Op 181 Str 181 PTUF4 182 Health 182 Mod 182 Op 183 Str 183 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C1863, Edition 11.2007 PTUV1 37, 41, 45, 49, 52, 55, 152 Health 152 Mod 152 Op 153 Str 152 Str.phsA 153 Str.phsB 153 Str.phsC 153 PTUV2 154 Health 154 Mod 154 Op 155 Str 154 Str.phsA 155 Str.phsB 155 Str.phsC 155 PTUV3 156 Health 156 Mod 156 Op 157 Str 156 Str.phsA 157 Str.phsB 157 Str.phsC 157 PTUV4 158 Health 158 Mod 158 Op 159 Str 158 Str.phsA 159 Str.phsB 159 Str.phsC 159 PTUV5 160 Health 160 Mod 160 Op 160 Str 160 PTUV6 161 Health 161 Mod 161 Op 161 Str 161 R RBRF1 38, 41, 46, 49, 52, 55, 194 Health 194 Mod 194 OpEx 194 OpIn 195 OpIn.phsA 195 OpIn.phsB 195 OpIn.phsC 195 Str 194 RDRE1 35, 39, 43, 48, 51, 57, 242 FltNum 243 GriFltNum 243 Health 242 Mod 242 RcdMade 242, 243 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C1863, Edition 11.2007 RcdStr 243 RFLO1 37, 41, 45, 55, 192 FltDiskm 193 FltDisPrc 193 FltZ 193 Health 192 Mod 192 RPSB1 35, 39, 43, 54, 103 BlkZn 104 Health 103 Mod 103 Str 103 Str.phsA 104 Str.phsB 104 Str.phsC 104 RPSB10 105 BlkZn 106 Health 105 Mod 105 Str 105 Str.phsA 106 Str.phsB 106 Str.phsC 106 RPSB2 107 BlkZn 108 Health 107 Mod 107 Str 107 Str.phsA 108 Str.phsB 108 Str.phsC 108 RPSB3 109 BlkZn 110 Health 109 Mod 109 Str 109 Str.phsA 110 Str.phsB 110 Str.phsC 110 RPSB4 111 BlkZn 112 Health 111 Mod 111 Str 111 Str.phsA 112 Str.phsB 112 Str.phsC 112 RPSB5 113 BlkZn 114 Health 113 Mod 113 Str 113 Str.phsA 114 Str.phsB 114 Str.phsC 114 RPSB6 54, 115 Health 115 Mod 115 Op 115 251 RREC1 37, 40, 45, 49, 52, 56, 57, 147 AutoRecSt 148 Health 147 Mod 147 Op 148 RSYN1 37, 41, 45, 52, 55, 149 AngInd 150 DifAngCIc 151 DifHzCIc 151 DifVCIc 152 Health 149 HzInd 150 Mod 149 Rel 149 SynPrg 150 VInd 150 SumSwARs 207 X XCBR1 35, 39, 43, 48, 51, 56, 198 BlkCls 199 BlkOpn 199 CirSpv 199 Health 198 Loc 198 Mod 198 OpCnt 198 Pos 199 SumSwAR1s 200 SumSwAR2s 200 SumSwAR3s 200 XCBR2 35, 39, 43, 48, 51, 56, 201 BlkCls 202 BlkOpn 202 CirSpv 202 Health 201 Loc 201 Mod 201 OpCnt 201 Pos 202 SumSwARs 203 XCBR3 35, 39, 43, 48, 51, 203 BlkCls 204 BlkOpn 204 CirSpv 204 Health 203 Loc 203 Mod 203 OpCnt 204 Pos 204 SumSwARs 205 XCBR4 205 BlkCls 206 BlkOpn 206 CirSpv 206 Health 205 Loc 205 Mod 205 OpCnt 206 Pos 206 252 SIPROTEC, 7SD/7SA/7VK, PIXIT C53000-G1176-C1863, Edition 11.2007