COOLX®1800
HIGH EFFICIENCEY, INTELLIGENT AND RELIABLE 1800 W MODULAR
POWER SUPPLIES
Advanced Energy's CoolX®1800 series, part of our low voltage
solutions, is an intelligent modular power supply. The CoolX1800
delivers an incredible 1800 W in a compact 1U high package with
PMBus™ digital communications, control and reliability in addition
to the most comprehensive feature set and specifications available.
CX18S CX18M
Power
1800 W 1800 W
Slots
6 6
Cooling
Variable fan speed control
Parameters
267 mm x 127 mm x 41 mm
(10.5 in x 5 in x 1U)
Certifications
Medical (CX18M)
IEC60601-1 3rd edition,
IEC60601-1-2 4th edition (EMC)
2 MOPP
Dual fused
ISO13485
Industrial (CX18S)
IEC60950, IEC62368-1
SEMI F47
Defense/Aero (All Models)
MIL-STD-810G
AT A GLANCE
PRODUCT HIGHLIGHTS
Modular Power Supply
Up to 1800 W
Up to 12 outputs
All outputs isolated (1850 VAC)
Variable fan speed control
Reliability
MTBF > 200,000 hours
Level 4 input surge protection
23.5 W always ON auxiliary power
output
Safety approved to 5000 m altitude
93% efficiency
Five-year warranty
Flexibility
Analog and digital management —
PMBus™ monitoring and control
capability
Field-configurable — plug and play
power
Series and parallel outputs for higher
voltages and currents
Mounting options — base/side and
DIN-Rail mounting
TYPICAL APPLICATIONS
Medical
Clinical diagnostic equipment, medical
lasers, dialysis equipment, radiological
imaging, chemical chemistry
Industrial
Test and measurement, industrial
machines, automation equipment,
printing, telecommunications, MIL-COTS
Audio Equipment
Hi Rel, harsh industrial electronics,
radar (marine- and ground-based),
communications, test and measurement
2 advancedenergy.com
COOLX1800 SERIES
MODULES
CoolX CoolMods Table
Single Output Modules
(1 Slot)
Vnom(V) Set Point Adjust Range (V) Imax(A) Power (W)
CmA 5 2.5-6.0 30.0 150
CmB112 6.0-15.0223.3 280
CmC 24 15.0-28.0 12.5 300
CmD 48 28.0-58.036.25 300
High Power Modules (3 Slot)
CmE4 24 22.8-25.2 37.5 900
CmF4 48 45.6-50.4 18.75 900
Dual Output Modules (1 Slot)
CmG5 V1 24 3.0-30.0 4.0 120
V2 24 3.0-30.0 4.0 120
CmH6 V1 5 3.0-6.0 10.0 60
V2 24 3.0-30.0 4.0 120
Wide Trim Modules (1 Slot)
CmA-W01 5 1.0-6.0 30 150
CmB-W01 12 1.0-15.0223.3 280
CmC-W01 24 2.0-28.0 12.5 300
CmD-W01 48 3.0-58.036.25 300
1 Full dynamic specifications may not be met at full load when output voltage is trimmed above 13 V.
2 Max Trim 14 V when used with High Power Module
3 Max Trim 56 V when used with High Power Module
4 a) Only one High Power module (CmE or CmF) can be used per CoolPac.
b) During load transients starting from 0% load on the High Power modules, other modules in the CoolPac may experience an output voltage
dynamic during the load change. Contact applications support for details or support..
5 For the CmG module the max combined power of both outputs is 200 W.
6 For the CmH module the max combined power of both outputs is 180 W.
*SEMI F47 compliant at input voltages > 180 VAC. Consult Advanced Energy for details.
advancedenergy.com 3
COOLX1800 SERIES
ELECTRICAL SPECIFICATIONS
Input
Parameter Conditions/Description Min Nom Max Units
Nominal Input Voltage Range Universal Input 47-440Hz 100 — 240 VAC
AC Operating Input Range 85 — 264 VAC
Extended AC Operating Range Maximum for 5 seconds — — 300 VAC
DC Input Voltage Range 120 300 VDC
Input Current 90 VAC @ 1800 W — — 14.5 A
Inrush Current 230 VAC @ 1800 W — — 25 A
Power Factor 120 VAC @ 1400 W 0.98 — — —
Undervoltage Lockout Shutdown 65 — 74 VAC
Input Fuses Rating Dual Fused (Line and Neutral) 250 VAC — 16 — A
Efficiency 230 VAC, 1800 W with 6 x CmC CoolMods 91 %
230 VAC, 1800 W with 2 x CmF CoolMod — 93 — %
Output
Parameter Conditions/Description Min Nom Max Units
Power Rating CX18: See derating curves — — 1800 W
Minimum Load 0 — — A
Line Regulation For ±10% change from nominal line — — ±0.1 %
CmE, CmF, CmG, CmH — — ±0.5 %
Load and Cross Regulation For 25% to 75% load change — — ±0.2 %
Transient Response Voltage Deviation, for 25% to 75% load change 0.5A/uS — — 4 (4) %
Settling Time, *CmE and CMF in () — — 500 (1000) µS
Ripple and Noise 100 mV or 1.0% pk-pk. 20 MHz BW — — 1 %
CmF — — 1.5 %
Overvoltage Protection Tracking OVP Level (N/A in CmE and CmF, CmG, CmH) 105 — 125 %
Latching OVP Level 125 — 160 %
Remote Sense Max. line drop compensation (N/A in CmG and CmH) — — 0.5 VDC
Overshoot — — 1 %
Rise Time Monotonic — — 10 ms
CmG and CmH — — 20 ms
Capacitive Load CmA-CmE 10 mF
CmG, CmH < 0.47 mF
Turn-On Delay From AC in — — 1000 ms
From Global Enable — — 10 ms
From CoolMod Enable — — 10 —
Hold-Up Time For nominal output voltages at full load CmE and CmF
combination at 1300 W
16 — — ms
CoolMod Power As per CoolMod table ————
Output Adjustment Range Manual: Multi-turn potentiometer. As per CoolMod table — — — —
Vtrim: As per CoolMod table ————
Overcurrent Protection Straight line with hiccup activation @ 35% Vo nom
CmE, CmF, CmG, CmH: Current limit hiccup autorecovery
110 130 150 %
Short Circuit Protection Yes, Autorecovery ————
OverTemperature Protection Yes, Autorecovery (CmG, CmH latch off ) ————
4 advancedenergy.com
COOLX1800 SERIES
ELECTRICAL SPECIFICATIONS (CONTINUED)
Auxiliary Output
Parameter Conditions/Description Min Nom Max Units
Auxiliary Output Voltage Aux Voltage Option A 11.76 12 12.24 V
Aux Voltage Option B 4.75 5 5.25 V
Load Regulation — — ±2 %
Line Regulation For ±10% change from nominal line — — ±0.5 %
Maximum Output Current Aux Voltage Option A — — 1.96 A
Aux Voltage Option B — — 4.7 A
Load Capacitance — — 1000 uF
Output Overcurrent Protection Hiccup 110 140 %
Short Circuit Protection Yes, Autorecovery ————
Galvanic Isolation
Parameter Conditions/Description Min Nom Max Units
Input to Output Reinforced (2 x MOPP); contact Advanced Energy for
Hi-Pot instructions
4000 — — VAC
Input to Case Basic (1 x MOPP) 1850 — — VAC
Output to Case Basic (1 x MOPP) 1850 — — VAC
Output to Output Basic (1 x MOPP) 1850 — — VAC
CmG, CmH V1-V2 Operational 500 — — VDC
Reliabilty
Parameter Conditions/Description Min Nom Max Units
Reliability and MTBF MTBF of >>3 million hours, Telecordia SR-332, Issue 4
CoolPac (excludes fans)
— 0.33 — Fpmh
Warranty 5 years ————
Environmental
Parameter Conditions/Description Min Nom Max Units
Operating Temperature Operates to specification below -20°C after 10 min warmup -40 — 70 °C
Storage Temperature -40 — 85 °C
Derating See derating curves ————
Relative Humidity Non-condensing 5 — 95 %RH
Shock and Vibration MIL-STD-810G Method 514.6 — — — —
Altitude — — 5000 m
advancedenergy.com 5
COOLX1800 SERIES
ELECTRICAL SPECIFICATIONS (CONTINUED)
Leakage Currents
Parameter Conditions/Description Nom Units
AC Leakage Current Input to earth ground
Normal Condition (High Line) Mains Voltage 264 VAC/60 Hz 244 µA
Single Fault Condition (High Line) Mains Voltage 264 VAC/60 Hz 435 µA
Touch Current
Normal Condition Mains Voltage 264 VAC/60 Hz 14.2 µA
Single Fault Condition Mains Voltage 264 VAC/60 Hz 246 µA
EMC
Parameter Conditions/Description Notes
Radiated Emissions1EN 55011, EN 55022 and FCC, Class B — Compliant
Conducted Emissions1EN 55011, EN 55022 and FCC, Class B — Compliant
Power Line Harmonics EN 61000-3-2, Class A — Compliant
Voltage Flicker EN 61000-3-3 — Compliant
ESD EN 61000-4-2, level 4, 8 kV contact, 15 kV air — A
Radiated Immunity EN 61000-4-3, level 3, 10 V/m 80-2700 MHz — A
Electrical Fast Transient EN 61000-4-4, level 4, ±4 kV — A
Surge Immunity EN 61000-4-5, level 4, 2 kV DM, 4 kV CM — A
Conducted RF Immunity EN 61000-4-6, level 3, 10 Vemf 150 KHz-80 MHz — A
Power Frequency Magnetic Field EN 61000-4-8, level 4, 30 A/m — A
Voltage Dips and Interruptions EN61000-4-11 10 ms
100 ms
500 ms
A
B
B
1 Consult AE applications for system level compliance
Standards and Directives
Standard Conditions/Description
Safety Agency Approvals EN60601-1 3rd Edition, UL60601-1, CSA601, EN60950 2nd Edition, CSA C22.2 No. 60950-1
IEC/EN 60950-1, Edition 2
and all national deviations
UL 60950-1/CSA 22.2 No 60950-1, Edition 2; 5000 m (16,400 ft) altitude, 100 VAC to 240 VAC ±10%
IEC/EN 60601-1, Edition 3
and all national deviations
IEC 60601-1 (2005), EN60601-1 (2006), ANSI/AAMI ES 60601-1 (2005), CAN/CSA C22.2 No. 60601-1 (2008);
5,000 m (16,400 ft) altitude, 100 VAC to 240 VAC ±10%
IEC 62368 Edition 2 IEC 62368-1 (2014) Edition 2; 5000 m (16,400 ft) altitude, 100 VAC to 240 VAC ±10%
IEC 60601-1-2 Edition 4 IEC 60601-1-2 (2014)
Protection class Class I
ROHS EU DIRECTIVE 2015/863 RoHS compliant
REACH-171 Compliant
Conflict Materials Compliant with Conflict Free Sourcing Initiative
6 advancedenergy.com
COOLX1800 SERIES
MECHANICAL SPECIFICATIONS
Mechanica Data
Parameter Description
Dimensions (L x W x H) L x W x H 267 mm x 127 mm x 41 mm (10.5” x 5” x 1U)
Weight Nominal Weight: CoolPac + 6 x CoolMods 1.6 Kg
Connectors Description Mating Connectors (if applicable)
AC/DC IEC input (Option) Screw terminal Block and IEC inlet options.
In Mating Connectors column state "See
Interface page"
—
Main DC output terminal block
(CmA-CmF, CmM-CmQ)
M4 Screws —
Main DC output terminal block
(CmG, CmH)
Camden - CTB9350/4A —
Output Signal Connector
(CmG, CmH)
Molex - 87833-0831 Camden - CTB9200/4A or Würth Elektronik - 691 352 710 004
System Signal Connector J1007 Molex 87833-0831 8-way Locking Molex 51110-0860; Non Locking Molex 51110-0850;
Crimp Terminal: Molex p/n 50394 or Molex 51110-0856 which
includes locking tab and polarization keying
Output Signal Connectors
J1001-1006
Molex 87833-0631 6-way Locking Molex 51110-0660; Non Locking Molex 51110-0650;
Crimp Terminal: Molex p/n 50394 or Molex 51110-0656 which
includes locking tab and polarization keying
Output Signal Connector
(CmG, CmH)
Molex 87833-0831 8-way Locking Molex 51110-0860; Non Locking Molex 51110-0850
Crimp Terminal: Molex p/n 50394 or Molex 51110-0856 which
includes locking tab and polarization keying
Output Sense Connectors J3 JST-S2BPH-K(LF)(SN) JST PHR2. Crimp Terminal JST BPH-002TP.0.5S or SPH-002T-
P.05S
Auxiliary Output Connector J1 Molex 1041880210 2pin
advancedenergy.com 7
COOLX1800 SERIES
MECHANICAL SPECIFICATIONS (CONTINUED)
Mechanical Drawings
4
1 Standard airflow direction
* Maximum screw penetration from base does not exceed 2mm.
8 advancedenergy.com
COOLX1800 SERIES
EFFICIENCY AND DERATING CURVES
Load (%)
92
90
88
86
84
82
80
78
76
0
Efficiency vs Load
Efficiency (%)
240V
Output Current (%)
Current & Power Overload Characteristics
Output Voltage (%)
Vo Nom Vo hiccup Vmax
140
120
100
80
60
40
20
0
0 20 40 60 80 100 120 140
Input Voltage (Vac)
CX18 Input Voltage Typical Derating Curves
Output Power (W)
Power
2000
1800
1600
1400
1200
1000
800
600
400
200
0
Ambient Temperature (ºC)
CX18 Temperature Derating Curve
Output Power (W)
IEC Terminal Block
2000
1800
1600
1400
1200
1000
800
600
400
200
0
-30
20 40 60 80 100 120
80 100 120 140 160 180 200 220 240 260 -20 -10 0 10 20 30 40 50 60 70 80
advancedenergy.com 9
COOLX1800 SERIES
INTERFACE (CONTINUED)
Input Connectors
CoolPac Connectors
Standard (Screw Terminal) Option 1 (IEC Terminal)
10 advancedenergy.com
COOLX1800 SERIES
INTERFACE (CONTINUED)
CoolMod Connectors
advancedenergy.com 11
COOLX1800 SERIES
CONFIGURATION
*CmE or CmF High Power Module (3 slot module) can only occupy Slots D/E/F.
Configuration Example 1
CoolX part number CX18S-ADG##E-N-A specifies the following product;
• CX18S 1800W IEC60950 approved
• Slot 1: CmA: 2.5-6.0V (150W)
• Slot 2: CmD: 28-58V (300W)
• Slot 3: CmG: Dual output 3-30V (120 per channel)
• Slot 4: Not Available (CmE is three slot CoolMod module)
• Slot 5: Not Available (CmE is three slot CoolMod module)
• Slot 6: CmE: 22.8-25.2 (900W)
• Option N: Nominal Output voltage settings
• Option A: 12V/(1.96)A Bias Supply Voltage
Configuration Example 2
CoolX part number CX18M-BABBDC-N-B specifies the following product;
• CX18M 1800W IEC60601-1 approved
• Slot 1: CmB: 6-15V (280W)
• Slot 2: CmA: 2.5-6.0V (150W)
• Slot 3: CmB: 6-15V (280W)
• Slot 4: CmB: 6-15V (280W)
• Slot 5: CmD: 28-58V (300W)
• Slot 6: CmC: 15-28V (300W)
• Option N: Nominal Output voltage setting
• Option B: 5V/(4.7A) Nominal Output voltage setting
ABOUT ADVANCED ENERGY
Advanced Energy (AE) has devoted more than three decades
to perfecting power for its global customers. AE designs and
manufactures highly engineered, precision power conversion,
measurement and control solutions for mission-critical appli-
cations and processes.
AE’s power solutions enable customer innovation in complex
semiconductor and industrial thin film plasma manufacturing
processes, demanding high and low voltage applications,
and temperature-critical thermal processes.
With deep applications know-how and responsive service and
support across the globe, AE builds collaborative partnerships
to meet rapid technological developments, propel growth for
its customers and power the future of technology.
Specifications are subject to change without notice. Not responsible for errors
or omissions. ©2019 Advanced Energy Industries, Inc. All rights reserved.
Advanced Energy® and AE® are U.S. trademarks, and CoolX® is a U.S. and
Europe trademark of Advanced Energy Industries, Inc.
For international contact information,
visit advancedenergy.com
ENG-LV-COOLX1800-235-07 12.19
