DS-197 REV E
Voltage Controlled Crystal Oscillator
Technical Data
SaRonix
S150x / ST150x Series
5V, HCMOS
Frequency Range:
ACTUAL SIZE
Description
A voltage controlled crystal oscillator
designed with excellent Jitter character-
istics - ideal for telecom applications.
The HCMOS output can drive high speed
CMOS & TTL loads. Devices are in
standard 14-pin DIP metal packages. Pin
7(4 on 1/2 size) is grounded to reduce
EMI. SMD DIL 14 version is available
utilizing adaptor technology (see sepa-
rate data sheet for dimensions).
1.5 MHz to 100 MHz ( Full Size )
1.5 MHz to 28.6363 MHz ( Half Size )
Frequency Stability: ±20, ±25 or ±50 ppm over all conditions: operating
temperature, voltage change, load change, calibration
tolerance, shock and vibration, with VC = 2.5V
Applications & Features
•
•
•
•
•
•
•
Phase Locked Loop (PLL) Clock &
Data Recovery, Frequency Translation,
Frequency Synthesis in Video, Video
Compression, Telephony, and LAN/
WAN Data Communication and other
Telecommunication applications.
HCMOS / TTL compatible
3.5ps max RMS period jitter
± 50, 100 or 200 ppm APR*
± 20, 25 or 50 ppm Stability
Tri-State option available
SMD versions for IR reflow available
Output Waveform
TrTf
CMOS
SYMMETRY
80% VDD
50% VDD
20% VDD
Logic 0
Logic 1
*
APR = (VCXO Pull relative to specified Output Frequency) – (VCXO Frequency Stability) – (Aging)
10 years aging is inclusive on 1/2 size version
Temperature Range:
Operating:
Storage:
0 to +70°C or -40 to +85°C
-55 to +125°C
Supply Voltage:
Recommended Operating: 5V ±10%
Supply Current:
1.5 to 11.9MHz:
12 to 70MHz:
70+ to 100MHz:
1.5 to 28.6363MHz:
Output Drive:
Symmetry:
Rise & Fall Times:
1.5 to 25 MHz:
25+ to 70 MHz:
70+ to 100 MHz:
1.5 to 28.6363 MHz:
Logic 0:
Logic 1:
Load:
Period Jitter RMS:
45/55% max @ 50% VDD 1.5 to 70 MHz
40/60% max @ 50% VDD 70+ to 100 MHz
20% to 80% VDD
8ns max rise, 6ns max fall, full size package
5ns max rise & fall, full size package
3ns max rise & fall, full size package
6ns max rise & fall, half size package
10% VDD max
90% VDD min
30pF to 70 MHz, 15pF from 70+ to 100 MHz
3.5ps max
Pull Characteristics:
Input Impedance (pin 1):
Frequency Response (-3dB):
Pullability:
Control Voltage:
Transfer Function:
Linearity:
Center Control Voltage:
50KΩ min
10 kHz min
±50, ±100, ±200ppm APR* min, See Part Numbering Guide
0.5 to 4.5V
Frequency increases when Control Voltage increases
5 or 10% max
2.5V
Environmental:
MIL-STD-883C, Method 1014, Condition C
MIL-STD-883C, Method 1014, Condition A2
MIL-STD-883C, Method 1011, Condition A
MIL-STD-883C, Method 1004
Gross Leak Test:
Fine Leak Test:
Thermal Shock:
Moisture Resistance:
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2003
MIL-STD-883, Method 2004, Conditions B2
MIL-STD-883, Method 2007, Condition A
MIL-STD-202, Method 215
MIL-STD-202, Method 210, Conditions A, B or C
( I or J for Gull Wing or SMD)
Mechanical:
Shock:
Solderability:
Terminal Strength:
Vibration:
Solvent Resistance:
Resistance to Soldering Heat:
20mA max with 30pF load
65mA max with 30pF load
60mA max with 15pF load
25mA max with 30pF load
SaRonix
www.pericom.com/saronix
Aging @ 25°C: ± 3ppm max per year, ±10ppm max for 10 years
Full Size Package:
Half Size Package: