VBPW34FAS, VBPW34FASR
www.vishay.com Vishay Semiconductors
Rev. 1.2, 24-Aug-11 1Document Number: 81127
For technical questions, contact: detectortechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Silicon PIN Photodiode
DESCRIPTION
VBPW34FAS and VBPW34FASR are high speed and high
sensitive PIN photodiodes. It is a surface mount device
(SMD) including the chip with a 7.5 mm2 sensitive area and
a daylight blocking filter matched with IR emitters operating
at wavelength 870 nm or 950 nm.
FEATURES
• Package type: surface mount
• Package form: GW, RGW
• Dimensions (L x W x H in mm): 6.4 x 3.9 x 1.2
• Radiant sensitive area (in mm2): 7.5
• High radiant sensitivity
• Daylight blocking filter matched with 870 nm to
950 nm emitters
• Fast response times
• Angle of half sensitivity: ϕ = ± 65°
• Floor life: 168 h, MSL 3, acc. J-STD-020
• Lead (Pb)-free reflow soldering
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
• Halogen-free according to IEC 61249-2-21 definition
APPLICATIONS
• High speed detector for infrared radiation
• Infrared remote control and free air data
transmissionsystems, e.g. in combination with TSFFxxxx
Note
• Test conditions see table “Basic Characteristics”
Note
• MOQ: minimum order quantity
21726
VBPW34FAS
VBPW34FASR
PRODUCT SUMMARY
COMPONENT Ira (μA) ϕ (deg) λ0.5 (nm)
VBPW34FAS 55 ± 65 780 to 1050
VBPW34FASR 55 ± 65 780 to 1050
ORDERING INFORMATION
ORDERING CODE PACKAGING REMARKS PACKAGE FORM
VBPW34FAS Tape and reel MOQ: 1000 pcs, 1000 pcs/reel Gullwing
VBPW34FASR Tape and reel MOQ: 1000 pcs, 1000 pcs/reel Reverse gullwing
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Reverse voltage VR60 V
Power dissipation Tamb ≤ 25 °C PV215 mW
Junction temperature Tj100 °C
Operating temperature range Tamb - 40 to + 100 °C
Storage temperature range Tstg - 40 to + 100 °C
Soldering temperature Acc. reflow sloder profile fig. 8 Tsd 260 °C
Thermal resistance junction/ambient RthJA 350 K/W
VBPW34FAS, VBPW34FASR
www.vishay.com Vishay Semiconductors
Rev. 1.2, 24-Aug-11 2Document Number: 81127
For technical questions, contact: detectortechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 1 - Reverse Dark Current vs. Ambient Temperature Fig. 2 - Relative Reverse Light Current vs. Ambient Temperature
BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Forward voltage IF = 50 mA VF11.3V
Breakdown voltage IR = 100 μA, E = 0 V(BR) 60 V
Reverse dark current VR = 10 V, E = 0 Iro 230nA
Diode capacitance VR = 0 V, f = 1 MHz, E = 0 CD70 pF
VR = 3 V, f = 1 MHz, E = 0 CD25 40 pF
Open circuit voltage Ee = 1 mW/cm2, λ = 950 nm Vo350 mV
Temperature coefficient of VoEe = 1 mW/cm2, λ = 950 nm TKVo - 2.6 mV/K
Short circuit current Ee = 1 mW/cm2, λ = 950 nm Ik50 μA
Temperature coefficient of IkEe = 1 mW/cm2, λ = 950 nm TKIk 0.1 %/K
Reverse light current Ee = 1 mW/cm2, λ = 950 nm,
VR = 5 V Ira 45 55 μA
Angle of half sensitivity ϕ± 65 deg
Wavelength of peak sensitivity λp950 nm
Range of spectral bandwidth λ 0.5 780 to 1050 nm
Noise equivalent power VR = 10 V, λ = 950 nm NEP 4 x 10-14 W/√Hz
Rise time VR = 10 V, RL = 1 kΩ,
λ = 820 nm tr100 ns
Fall time VR = 10 V, RL = 1 kΩ,
λ = 820 nm tf100 ns
20 40 60 80
1
10
100
1000
100
94 8403
VR = 10 V
Tamb - Ambient Temperature (°C)
I
ro
- Reverse Dark Current (nA)
0.6
0.8
1.0
1.2
1.4
94 8409
V
R
=5V
λ = 950 nm
100806040200
I - Relative Reverse Light Current
T - Ambient Temperature (°C)
amb
ra rel
VBPW34FAS, VBPW34FASR
www.vishay.com Vishay Semiconductors
Rev. 1.2, 24-Aug-11 3Document Number: 81127
For technical questions, contact: detectortechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 3 - Reverse Light Current vs. Irradiance
Fig. 4 - Reverse Light Current vs. Reverse Voltage
Fig. 5 - Diode Capacitance vs. Reverse Voltage
Fig. 6 - Relative Spectral Sensitivity vs. Wavelength
Fig. 7 - Relative Radiant Sensitivity vs. Angular Displacement
0.01 0.1 1
0.1
1
10
100
1000
I
ra
- Reverse Light Current (µA)
E
e
- Irradiance (mW/cm
2
)
10
12787
VR = 5 V
λ = 950 nm
0.1 1 10
1
10
100
V
R
- Reverse Voltage (V)
100
12788
I
ra
- Reverse Light Current (µA)
1mW/cm
2
0.5 mW/cm
2
0.2 mW/cm
2
0.1 mW/cm
2
0.05 mW/cm
2
= 950 nm
λ
0
20
40
60
80
948407
E = 0
f = 1 MHz
CD - Diode Capacitance (pF)
VR - Reverse Voltage (V)
0.1 100
110
21743 λ - Wavelength (nm)
S(λ)φ, rel - Relative Spectral Sensitivity
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
600 700 800 900 1000 1100
0.4 0.2 0
S
rel
- Relative Radiant Sensitivity
94 8406
0.6
0.9
0.8
0°
30°
10° 20°
40°
50°
60°
70°
80°
0.7
1.0
ϕ - Angular Displacement
VBPW34FAS, VBPW34FASR
www.vishay.com Vishay Semiconductors
Rev. 1.2, 24-Aug-11 4Document Number: 81127
For technical questions, contact: detectortechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS FOR VBPW34FAS in millimeters
Drawing-No.: 6.541-5086.01-4
Issue: 1; 15.04.10
22105
8.9
5.4
1.8
Recommended solder pad
specications
according to DIN
technical drawings
Anode Cathode
2.2 0.18 ± 0.2
4.4 ± 0.1
1.95
3.9 ± 0.1
1 ± 0.15
6.4 ± 0.3
0.8 ± 0.1
1.6 ± 0.1
Chip Size
3 x 3
1.2 ± 0.1
0.1 -0.1
(0.47 ref.)
Flat area 0.3 min.
0.75 ± 0.050.15 ± 0.02
VBPW34FAS, VBPW34FASR
www.vishay.com Vishay Semiconductors
Rev. 1.2, 24-Aug-11 5Document Number: 81127
For technical questions, contact: detectortechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS FOR VBPW34FASR in millimeters
Drawing-No.: 6.541-5085.01-4
Issue: 1; 15.04.10
8.9
5.4
1.8
Recommended solder pad
specications
according to DIN
technical drawings
A
node Cathode
2.2 0.18 ± 0.2
4.4 ± 0.1
1.95
3.9 ± 0.1
1 ± 0.3
6.4 ± 0.3
0.8 ± 0.1
1.6 ± 0.1
Chip Size
3 x 3
0.1 min.
(0.47 ref.)
Flat area 0.3 min
0.75 ± 0.050.15 ± 0.02
1.2 ± 0.1
22104
VBPW34FAS, VBPW34FASR
www.vishay.com Vishay Semiconductors
Rev. 1.2, 24-Aug-11 6Document Number: 81127
For technical questions, contact: detectortechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TAPING DIMENSIONS FOR VBPW34FAS in millimeters
TAPING DIMENSIONS FOR VBPW34FASR in millimeters
21731
VBPW34FAS, VBPW34FASR
www.vishay.com Vishay Semiconductors
Rev. 1.2, 24-Aug-11 7Document Number: 81127
For technical questions, contact: detectortechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
REEL DIMENSIONS FOR VBPW34FAS AND VBPW34FASR in millimeters
SOLDER PROFILE
Fig. 8 - Lead (Pb)-free Reflow Solder Profile
acc. J-STD-020
DRYPACK
Devices are packed in moisture barrier bags (MBB) to
prevent the products from moisture absorption during
transportation and storage. Each bag contains a desiccant.
FLOOR LIFE
Time between soldering and removing from MBB must not
exceed the time indicated in J-STD-020:
Moisture sensitivity: level 3
Floor life: 168 h
Conditions: Tamb < 30 °C, RH < 60 %
DRYING
In case of moisture absorption devices should be baked
before soldering. Conditions see J-STD-020 or
recommended conditions:
192 h at 40 °C (+ 5 °C), RH < 5 %
or
96 h at 60 °C (+ 5 °C), RH < 5 %.
21732
0
50
100
150
200
250
300
0 50 100 150 200 250 300
Time (s)
Temperature (°C)
240 °C 245 °C
max. 260 °C
max. 120 s max. 100 s
217 °C
max. 30 s
max. ramp up 3 °C/s max. ramp down 6 °C/s
19841
255 °C
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.