1165893
Page <2> 22/10/08 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual
stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional
operation is not implied, damage may occur and reliability may be affected.
1. Indicates JEDEC registered data.
2. Pulse test: pulse width = 5µs, duty cycle ≤10%.
Rating Symbol 2N3772 Unit
Collector-Emitter Voltage VCEO 140
V dc
Collector-Emitter Voltage VCEX
160
Collector-Base Voltage VCBO
Emitter-Base Voltage VEBO 7
Collector Current - Continuous
- Peak (Note 2) IC
16
30 Adc
Base Current - Continuous
- Peak (Note 2) IB
4
15
Total Device Dissipation at TA= 25°C
Derate above 25°C PD
150
0.855
W
W/°C
Operating and Storage Junction Temperature Range TJ, Tstg -65 to +200 °C
Maximum Ratings (Note 1)
Characteristics Symbol Maximum Unit
Thermal Resistance, Junction-to-Case RθJC 1.17 °C/W
Thermal Characteristics
Electrical Characteristics (TC= 25°C unless otherwise noted)
Characteristic Symbol Minimum Maximum Unit
Off Characteristics (Note 3)
Collector-Emitter Breakdown Voltage (Note 4)
(lC = 0.2 A dc, lB= 0) VEO (sus) 140 -
V dc
Collector-Emitter Sustaining Voltage (Note 4)
(IC= 0.1A dc, VEB (off) = 1.5 Vdc, RBE = 100Ω)VCEX(sus) 160 -
Collector-Emitter Sustaining Voltage
(IC= 0.2A dc, RBE = 100Ω)VCER(sus) 150 -
Collector Cut off Current (Note 4)
(VCE = 120V dc, IB= 0 ) ICEO - 10
mA dc
Collector Cut off Current (Note 4)
(VCE = 140V dc, VEB (off) = 1.5V dc)
(VCE = 140V dc, VEB (off) = 1.5V dc, TC= 150°C)
ICEX -2
10