88
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Wire-to-Board, .100 [2.54] Centerline Products
AMPMODU Interconnection System
Wire-to-Board
Products
5
Wire Size Product Family
AWG [mm2]
20 0.5-0.6 Locking Clip, Mod. IV, IV.v, V, MT, Short Point
22-30 0.3-0.05 Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point
32 0.03 Mod. IV, IV.v, V, Short Point
Platings Product Family
.000015 [0.00038] Mod. IV, IV.v, V, MTE, MT, Short Point
Gold
.000030 [0.00076] Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point
Gold
.000050 [0.00127] Locking Clip, Mod. IV, IV.v, V, MT
Gold
Tin Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point
Wire Sizes
Contact Platings
Post Lengths Product Family
.210-.283 [5.33-7.19] Mod. IV (.600 [15.24] Profile Height)
.205-.283 [5.21-7.19] Mod. IV.v (.600 [15.24] Profile Height)
.185-.283 [4.70-7.19] Mod. V (.600 [15.24] Profile Height)
.256-.323 [6.50-8.20] Mod. IV (.645 [16.38] Profile Height)
.251-.323 [6.38-8.20] Mod. IV.v (.645 [16.38] Profile Height)
.231-.323 [5.87-8.20] Mod. V (.645 [16.38] Profile Height)
.222-.273 [5.64-6.93] MT Assembly with Standard Pressure Contacts
.200-.273 [5.08-6.93] MT Assembly with High Pressure Contacts
.200-.250 [5.08-6.35] MTE Assembly
.169-.259 [4.29-6.58] Short Point Connector Assembly
.273-.350 [6.93-8.89] Locking Clip (Connector Assembly)
.200-.277 [5.08-7.04] Locking Clip (Single Contact)
Mating Post Lengths
Application Tooling Application Tooling Product Family
Description Mod. IV, MT Locking MTE Short Level V
IV.v, V Clip Point
Manual Hand Tools (Wire Crimp) ••••
Manual Hand Tools (IDC) •••
AMP-O-MATIC Stripper/Crimper •• •
Machines with Applicator
CHAMPOMATOR ••
Model 2.5 Machine
CHAMPOMATOR •
Model 3A Machine
AMP-O-LECTRIC •• •
Machines with Applicator
Pneumatic Hand Tools ••••••
IDC Electric Power Unit •
Tube-Fed Ribbon •
Cable Machine
AMPOMATOR CLS Machines •• •
Discrete Wire Machine ••
Manual Arbor Tool ••
Pneumatic Arbor Tool ••
89
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Board-to-Board Solutions Guide, .100 [2.54] Centerline Products
AMPMODU Interconnection System
.100 [2.54] Centerline
Products
5
Customer Requirement Tyco Electronics' Potential Solution Catalog Page(s)
Mod IV Polarized Housing 220
Application Requires MTE Latched Receptacle and Header 230, 231, 244-250
Guidance, Polarization MT with Polarizing Covers 256-258
Short Point Polarized Housing 224
Wire-to-Wire Application Mod IV Receptacle Contacts and Pins 211-213
Wire-to-Wire Application (Latched) MTE Latched Receptacle and Shrouded Pin Assembly 230, 231, 236, 237
Wire-to-Wire Application (Through Panel) MTE Panel Mount 242
High Vibration and Shock Applications Locking Clip Contacts and Housings 207-209
Printed Circuit Board Polarization MTE Header with PC Board Orientation Peg 248, 249
Board Requires Surface Mount Capability MTE Surface Mount Headers 251, 252
MTE High Temperature Compatible Headers 249, 250
Need to mate to Mod IV Ejection Housing 220
AMP-LATCH Eject Headers
Need to Minimize Strain to Cable MT with Eject Covers 256-259
Mod IV Housing with Strain Relief 218, 219
Application Requires Locking Clip Contacts 207, 298
Self-Retaining Contacts
Header Secured to Board MTE Headers with Post Retention or Holddowns 244-250
During/Prior to Soldering
Mate to Unshrouded Header Mod IV plain Housing with Mod V Contacts 213, 214, 216
with Retention Requirements MTE with High Pressure Contacts 234, 235
Multiple Cables to be MTE Coupling Shroud, Double- or Single-Row 240, 241
Common to One Header
Right-Angle Cable Dress MT with Hermaphroditic Covers 229, 256, 257, 259
Application Requires Crimp Short Point Contacts 222
Contacts and MTE Housings
Housings and End-to-End and Short Point Double-Row Housing, 223, 228, 229
Side-to-Side Stackable MTE Plain Housing
Connector Must Mate to Short Point Contacts 222
Post Lengths of .169 [4.29] Min.
Wire-to-Board Solutions Guide, .100 [2.54] Centerline Products
Single-Row Single-Row Double-Row Double-Row
Problem or Concern Tyco Electronics' Vertical Headers Right-Angle Headers, Vertical Headers Right-Angle Headers,
Potential Solution and Receptacles Horizontal Receptacles and Receptacles Horizontal Receptacles
(Page Ref.) (Page Ref.) (Page Ref.) (Page Ref.)
Headers Float Off Board HEADERS Retention Feature:
Soldering Operation Unshrouded 102 103 198 199
Shrouded — — 104, 199 105, 200
Header Contacts Damaged Shrouded HEADERS:
During Manufacturing Standard Profile 115 116 117-121 122-128
Operation or In-Field Use
Press-Fit ACTION PIN POST
HEADERS:
Unshrouded 146 — 147 —
Shrouded — — 148, 149, 199 —
Machine Applied 163, 164
Posts
Board/Backplane Requires Surface-Mount Compatible Thru-Hole:
High Temperature Surface- HEADERS:
Mount Compatibility Unshrouded 102* 103* 104* 105*
Shrouded — — 130*, 137* 138*
(Low Profile)
RECEPTACLES — — 196* 195*
Surface-Mount:
HEADERS 109* — 110 —
RECEPTACLES 187, 188 172 189-192 173
Application Requires Board Two-Piece Family: w/Guide Posts:
Guidance, Polarization and/or HEADERS — — 198, 199 200
Blind-Mate Capability RECEPTACLES — — 196* 195*
Mod IV Low Profile
RECEPTACLES:
Reduction in Parallel TOP ENTRY:
Board-to-Board Stack Height Thru-Hole 178 — 179, 180* —
Necessary (Refer to Parallel Surface-Mount — — — —
Stack Guide on Page 62.) BOTTOM ENTRY:
Thru-Hole 177 — — —
Surface-Mount — — — —
DUAL ENTRY
Thru-Hole 181 — 182-184 —
Surface Mount 187, 188 — 189-192 —
Soldering Problems with RECEPTACLES:
Thru-Hole Bottom Entry Bottom Entry
Receptacles (Must Mask Outrigger 181 — 182 —
Post Holes in Board During (Separate Holes for
Soldering Operation) Receptacle Leads
and Mating Leads)
End-to-End Stackable:
HEADERS (Unshrouded):
Application Requires Thru-Hole 93, 102 94, 95, 103* 96, 97, 104* 98. 99. 105
Connectors to be End-to-End Thru-Hole* 102* 103* 104* 108*
Stackable on .100 [2.54] Grid Surface-Mount 109* — 110* —
RECEPTACLES:
Thru-Hole 175, 177, 178, 181 169* 176, 179, 180*, 182*, 183, 184 170
Surface Mount 188 172 191, 192 173
*High temperature compatible version, refer to page ref. listed.
225
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Interconnection System
AMPMODU Interconnection System
MTE Interconnection System
5
Performance
Specifications
Electrical Characteristics
Contact Current Rating —
3 amperes for single contact in free air
(Amperage could vary due to ambient
temperature, wire size and duty cycles.)
Contact Termination
Resistance — 15 milliohms (max.)
Dielectric Withstanding Voltage —
At Sea Level–600 VAC, rms
At 70,000 Ft. [21 336 m]–225 VAC, rms
Insulation Resistance —
5,000 megohms (min.)
Environmental Characteristics
Operating Temperature —
-65°C to +105°C
Vibration — 15 G’s (gold), 10 G’s (tin)
Physical Shock — 50 G’s
Industrial Mixed Flow Gasing —
Class 1 (20 days) (gold)
Product Specification
108-25034
Application Specification
114-25026
Product Facts
■Receptacle assemblies mate
with .025 [0.64] sq. posts;
mating post length is .200
[5.08] min., .250 [6.35] max.
■Proven AMPMODU receptacle
contact design; dual
cantilever beams, built-in
anti-overstress, completely
enclosed “box” design,
standard or high-pressure
■Insulation displacement
technology
■Two contact sizes for
terminating 30-22 AWG [0.05-
0.3 mm2] wire range; .054
[1.37] max. insulation diam -
eter with an insulation wall
thickness of .015 [0.38] max.
■Choice of gold duplex or tin
plated contacts
■Interchangeable crimp
snap-in pin and receptacle
contacts available
■Housing sizes 2 through
25 positions, single-row .100
[2.54] centers
■Plain housings are end-to-end
and/or back-to-back stackable
for open pin field applications
■Optional header with
“swaged tail” feature helps
prevent movement prior to
flow soldering
■Integral latch provides
positive retention between
header and receptacle
housing
■Coupling shrouds permit
ganging of smaller connectors
with guide ribs to form larger
single- or double-row
latching connectors
■Mass terminating tooling
provides lowest applied cost
for most production needs
■SMT and SMT compatible,
high-temp headers available
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR7189
The AMPMODU MTE
Interconnection System
offers both wire-to-board
and wire-to-wire connectors
using .025 [0.64] sq. post
technology.
The AMPMODU MTE
Interconnection System
consists of single-row
housings with contacts
preloaded on .100 [2.54]
centers. Housings are
furnished with contacts
partially inserted, leaving
the termination areas
exposed. Final contact
insertion can be
accomplished automatically
with Tyco Electronics
application equipment, and
manually when terminated
with the Tyco Electronics
pistol grip hand tool.
The heart of the system is
the insulation displacement
contact design, featured in
both pin and receptacle
contacts. The receptacle
contact, available in either
standard or high-pressure,
features dual cantilever
beams in an enclosed
“box.” The post stop helps
prevent a mating post from
disturbing the wire
termination and also limits
the mating depth of a long
post to protect a wrap-type
termination at the base of
the post. The forward
contact stop helps prevent
contact overinsertion prior
to termination. All contacts
are furnished on carrier
strips which are interlocked
for stability and positive
location during termination.
Single-row housings are
available in sizes 2 through
25 positions. Included are
three styles of receptacle
housings—plain, polarized/
latching and ribbed and two
styles of pin housings,
shrouded with polarizing/
latching feature and ribbed.
R
R
226
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Interconnection System (Continued)
AMPMODU Interconnection System
MTE Interconnection System
5
Receptacle Assemblies
with Guide Ribs
(See pages 232 & 233)
Receptacle Assemblies
Polarized/Latching
(See pages 230 & 231)
Double-Row Coupling
Shroud (See page 241)
AMPMODU Shrouded
Headers, Double-Row,
Straight or Right Angle
Post1(See pages
119-121, 124, 125, 127,
128, 131-133 & 149)
Receptacle Assemblies
with Guide Ribs
(See pages 232 & 233)
Receptacle Contact,
Insulation Displacement
(Used in all
Receptacle Assemblies)
AMPMODU Breakaway Headers,
Single- or Double-Row, Straight
or Right–Angle Post, with or
without Board Retention Feature
(See pages 102-105)
Receptacle Assemblies Plain
(See pages 228 and 229)
High Pressure Receptacle Assemblies,
Plain (See page 234)
Receptacle
Assemblies,
Polarized/Latching (See
pages 230 & 231)
High-Temp Headers,
Polarized/Latching, Straight
and Right Angle Post,
with or without Holddown
(See pages 249 & 250)2
Headers,
Polarized/Latching,
Straight Post, with or
without Swaged Tail
(See pages 244 & 245)2
Headers,
Polarized/Latching,
Right Angle Post, with
or without Holddown
(See pages 246 & 247)
1Mating AMPMODU Double-Row Shrouded Header Assemblies must have .318 [8.08] mating post length and .150 [3.81] dimension from centerline of last
1post to inside of end shroud wall.
2Surface Mount Right-Angle and Vertical Headers are also available (see pages 251 and 252)
Wire-to-Board
Single-Row Coupling
Shroud (See page 240)
227
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Interconnection System (Continued)
AMPMODU Interconnection System
MTE Interconnection System
5
Receptacle Contact,
Insulation Displacement
(Used in all
Receptacle Assemblies)
Crimp Snap-In
Receptacle Contact
(Used with Unloaded
Housings—
See page 253)
Crimp Snap-In Pin
Contact (Used with
Unloaded Housings—
See page 254)
Pin Contact,
Insulation
Displacement
(Used in all Pin
Assemblies)
Pin Assemblies, Shrouded
Polarized/Latching
(See pages 236 & 237)
Receptacle Assemblies,
Polarized/Latching
(See pages 230 & 231)
Receptacle Assemblies
with Guide Ribs
(See pages 232 & 233)
Single-Row
Coupling
Shroud (See
page 240)
Panel Mount
Pin Shroud
(See page 242)
Pin Assemblies
with Guide Ribs (See
pages 238 & 239)
Note: For wire-to-wire applications shown above, all pin and receptacle assembly combinations are intermateable.
Wire-to-Wire
228
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Receptacle Assemblies—Plain, Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
MTE Receptacle Assemblies
5
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
Tyco Electronics Manual Pistol
Grip Tool.
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze,
plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.
Related Product Data
Mateable AMPMODU Products
Breakaway Headers — pages 102-
110 (with .230 mating length)
Reeled Breakaway Headers —
pages 106, 107 (with .230 mating
length)
Machine Applied Bandolier
Posts — page 163
Single-Row Shrouded Headers
with .066 [1.68] End Dimension —
pages 115, 116
Interchangeable Crimp Contacts
(Short Point) — page 253
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Receptacle Contacts
(See Note 1)
Position No. 1 Indicator
(Farside)
1.120
[28.45]
.600
[15.24]
.098
[2.49]
.100
[2.54] Ty p .
B
Ty p .
A
.520
[13.21]
These receptacle assemblies
with plain housings can be
stacked end-to-end and/or side-
to-side for single or double-row
connections to an open pin field
with a .100 [2.54] centerline grid.
229
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Receptacle Assemblies—Strip Form Plain,
Single-Row, .100 [2.54] Centerline (Continued)
MTE Receptacle Assemblies—Individual Form Plain,
Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Receptacle Assemblies
5
Housing Strip Form Receptacle Assembly Strip Form Receptacle Assembly
No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. AB
Per Strip Plating A Plating B Plating C Plating A Plating B Plating C Housings
Segment
22.000 [50.80] .198 [5.03] 10 5-103979-1 5-103978-1 5-103977-1 5-103976-1 5-103975-1 5-103974-1 103688-1
32.400 [60.96] .298 [7.57] 8 5-103979-2 5-103978-2 5-103977-2 5-103976-2 5-103975-2 5-103974-2 103688-2
41.990 [50.55] .398 [10.11] 5 5-103979-3 5-103978-3 5-103977-3 5-103976-3 5-103975-3 5-103974-3 103688-3
51.990 [50.55] .498 [12.65] 4 5-103979-4 5-103978-4 5-103977-4 5-103976-4 5-103975-4 5-103974-4 103688-4
62.390 [60.71] .598 [15.19] 4 5-103979-5 5-103978-5 5-103977-5 5-103976-5 5-103975-5 5-103974-5 103688-5
71.400 [35.56] .698 [17.73] 2 5-103979-6 5-103978-6 5-103977-6 5-103976-6 5-103975-6 5-103974-6 103688-6
81.600 [40.64] .798 [20.27] 2 5-103979-7 5-103978-7 5-103977-7 5-103976-7 5-103975-7 5-103974-7 103688-7
91.800 [45.72] .898 [22.81] 2 5-103979-8 5-103978-8 5-103977-8 5-103976-8 5-103975-8 5-103974-8 103688-8
10 2.000 [50.80] .998 [23.35] 2 5-103979-9 5-103978-9 5-103977-9 5-103976-9 5-103975-9 5-103974-9 103688-9
11 2.200 [55.88] 1.098 [27.89] 2 6-103979-0 6-103978-0 6-103977-0 6-103976-0 6-103975-0 6-103974-0 1-103688-0
12 2.400 [60.96] 1.198 [30.43] 2 6-103979-1 6-103978-1 6-103977-1 6-103976-1 6-103975-1 6-103974-1 1-103688-1
No. of Dimensions Individual Receptacle Assembly Individual Receptacle Assembly Unloaded
Pos. B 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Housings
Plating A Plating B Plating C Plating A Plating B Plating C
13 1.298 [32.96] 6-103903-2 6-103684-2 6-103685-2 6-103902-2 6-103686-2 6-103687-2 1-103688-2
14 1.398 [35.51] 6-103903-3 6-103684-3 6-103685-3 6-103902-3 6-103686-3 6-103687-3 1-103688-3
15 1.498 [38.05] 6-103903-4 6-103684-4 6-103685-4 6-103902-4 6-103686-4 6-103687-4 1-103688-4
16 1.598 [40.59] 6-103903-5 6-103684-5 6-103685-5 6-103902-5 6-103686-5 6-103687-5 1-103688-5
17 1.698 [43.13] 6-103903-6 6-103684-6 6-103685-6 6-103902-6 6-103686-6 6-103687-6 1-103688-6
18 1.798 [45.67] 6-103903-7 6-103684-7 6-103685-7 6-103902-7 6-103686-7 6-103687-7 1-103688-7
19 1.898 [48.20] 6-103903-8 6-103684-8 6-103685-8 6-103902-8 6-103686-8 6-103687-8 1-103688-8
20 1.998 [50.75] 6-103903-9 6-103684-9 6-103685-9 6-103902-9 6-103686-9 6-103687-9 1-103688-9
21 2.098 [53.29] 7-103903-0 7-103684-0 7-103685-0 7-103902-0 7-103686-0 7-103687-0 2-103688-0
22 2.198 [55.83] 7-103903-1 7-103684-1 7-103685-1 7-103902-1 7-103686-1 7-103687-1 2-103688-1
23 2.298 [58.37] 7-103903-2 7-103684-2 7-103685-2 7-103902-2 7-103686-2 7-103687-2 2-103688-2
24 2.398 [60.91] 7-103903-3 7-103684-3 7-103685-3 7-103902-3 7-103686-3 7-103687-3 2-103688-3
25 2.498 [63.45] 7-103903-4 7-103684-4 7-103685-4 7-103902-4 7-103686-4 7-103687-4 2-103688-4
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into
housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with
Tyco Electronics
pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.
230
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Receptacle Assemblies—Polarized/Latching,
Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
MTE Receptacle Assemblies
5
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze, plated
as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.
Related Product Data
Mateable AMPMODU Products
Pin Assemblies (Polarized/
Latching) — pages 236, 237
Pin Assemblies with Guide
Ribs (installed in Panel Mount
Pin Shroud) — pages 238, 239, 242
Headers (Polarized/Latching) —
pages 244-252
Interchangeable Crimp Contacts
(Short Point) — page 253
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Receptacle Contacts
(See Note 1)
Position No. 1 Indicator
(Farside)
1.120
[28.45]
.600
[15.24]
.098
[2.49]
.100
[2.54] Ty p .
B
Ty p .
A
.520
[13.21]
Preassembled housings in strip
form are available in positions 2 thru
12. For ease of handling, positions
2 thru 5 are recommended when
using the Tyco Electronics Manual
Pistol Grip Tool.
231
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Receptacle Assemblies—Strip Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Receptacle Assemblies
5
Housing Strip Form Receptacle Assembly Strip Form Receptacle Assembly
No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. AB
Per Strip Plating A Plating B Plating C Plating A Plating B Plating C Housings
Segment
22.000 [50.80] .198 [5.03] 10 5-103961-1 5-103960-1 5-103959-1 5-103958-1 5-103957-1 5-103956-1 104257-1
32.400 [60.96] .298 [7.57] 8 5-103961-2 5-103960-2 5-103959-2 5-103958-2 5-103957-2 5-103956-2 104257-2
41.990 [50.55] .398 [10.11] 5 5-103961-3 5-103960-3 5-103959-3 5-103958-3 5-103957-3 5-103956-3 104257-3
51.990 [50.55] .498 [12.65] 4 5-103961-4 5-103960-4 5-103959-4 5-103958-4 5-103957-4 5-103956-4 104257-4
62.390 [60.71] .598 [15.19] 4 5-103961-5 5-103960-5 5-103959-5 5-103958-5 5-103957-5 5-103956-5 104257-5
71.400 [35.56] .698 [17.73] 2 5-103961-6 5-103960-6 5-103959-6 5-103958-6 5-103957-6 5-103956-6 104257-6
81.600 [40.64] .798 [20.27] 2 5-103961-7 5-103960-7 5-103959-7 5-103958-7 5-103957-7 5-103956-7 104257-7
91.800 [45.72] .898 [22.81] 2 5-103961-8 5-103960-8 5-103959-8 5-103958-8 5-103957-8 5-103956-8 104257-8
10 2.000 [50.80] .998 [23.35] 2 5-103961-9 5-103960-9 5-103959-9 5-103958-9 5-103957-9 5-103956-9 104257-9
11 2.200 [55.88] 1.098 [27.89] 2 6-103961-0 6-103960-0 6-103959-0 6-103958-0 6-103957-0 6-103956-0 1-104257-0
12 2.400 [60.96] 1.198 [30.43] 2 6-103961-1 6-103960-1 6-103959-1 6-103958-1 6-103957-1 6-103956-1 1-104257-1
MTE Receptacle Assemblies—Individual Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline
No. of Dimensions Individual Receptacle Assembly Individual Receptacle Assembly Unloaded
Pos. B 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Housings
Plating A Plating B Plating C Plating A Plating B Plating C
13 1.298 [32.96] 6-103897-2 6-103640-2 6-103641-2 6-103734-2 6-103644-2 6-103645-2 1-104257-2
14 1.398 [35.51] 6-103897-3 6-103640-3 6-103641-3 6-103734-3 6-103644-3 6-103645-3 1-104257-3
15 1.498 [38.05] 6-103897-4 6-103640-4 6-103641-4 6-103734-4 6-103644-4 6-103645-4 1-104257-4
16 1.598 [40.59] 6-103897-5 6-103640-5 6-103641-5 6-103734-5 6-103644-5 6-103645-5 1-104257-5
17 1.698 [43.13] 6-103897-6 6-103640-6 6-103641-6 6-103734-6 6-103644-6 6-103645-6 1-104257-6
18 1.798 [45.67] 6-103897-7 6-103640-7 6-103641-7 6-103734-7 6-103644-7 6-103645-7 1-104257-7
19 1.898 [48.20] 6-103897-8 6-103640-8 6-103641-8 6-103734-8 6-103644-8 6-103645-8 1-104257-8
20 1.998 [50.75] 6-103897-9 6-103640-9 6-103641-9 6-103734-9 6-103644-9 6-103645-9 1-104257-9
21 2.098 [53.29] 7-103897-0 7-103640-0 7-103641-0 7-103734-0 7-103644-0 7-103645-0 2-104257-0
22 2.198 [55.83] 7-103897-1 7-103640-1 7-103641-1 7-103734-1 7-103644-1 7-103645-1 2-104257-1
23 2.298 [58.37] 7-103897-2 7-103640-2 7-103641-2 7-103734-2 7-103644-2 7-103645-2 2-104257-2
24 2.398 [60.91] 7-103897-3 7-103640-3 7-103641-3 7-103734-3 7-103644-3 7-103645-3 2-104257-3
25 2.498 [63.45] 7-103897-4 7-103640-4 7-103641-4 7-103734-4 7-103644-4 7-103645-4 2-104257-4
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into
housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.
232
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Receptacle Assemblies—Guide Ribs,
Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
MTE Receptacle Assemblies
5
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recommended
when using the Tyco Electronics
Manual Pistol Grip Tool.
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze,
plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.
Related Product Data
Coupling Shrouds used with —
Single-Row — page 240
Double-Row — page 241
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Single-Row Coupling
Shrouds) —
Pin Assemblies (Polarized/
Latching) — pages 236, 237
Pin Assemblies with Guide Ribs
(installed in Panel Mount Pin
Shroud) — pages 238, 239, 242
Headers (Polarized/Latching) —
pages 244-252
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Double-Row Coupling
Shrouds) —
Headers, Shrouded, Double-Row
(.318 [8.08] mating post length,
.150 [3.81] end dimension) —
pages 119-121, 124, 125, 128, 129,
131-133
Receptacle Contacts
(See Note 1)
Position No. 1 Indicator
(Farside)
1.120
[28.45]
.600
[15.24]
.098
[2.49]
.100
[2.54] Ty p
B
Ty p .
A
.520
[13.21]
Interchangeable Crimp Contacts—
(Short Point) — page 253
Application Tooling —
page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
233
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Receptacle Assemblies—Strip Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline (Continued)
MTE Receptacle Assemblies—Individual Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Receptacle Assemblies
5
Housing Strip Form Receptacle Assembly Strip Form Receptacle Assembly
No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. AB
Per Strip Plating A Plating B Plating C Plating A Plating B Plating C Housings
Segment
22.000 [50.80] .198 [5.03] 10 5-103973-1 5-103972-1 5-103971-1 5-103970-1 5-103969-1 5-103968-1 103648-1
32.400 [60.96] .298 [7.57] 8 5-103973-2 5-103972-2 5-103971-2 5-103970-2 5-103969-2 5-103968-2 103648-2
41.990 [50.55] .398 [10.11] 5 5-103973-3 5-103972-3 5-103971-3 5-103970-3 5-103969-3 5-103968-3 103648-3
51.990 [50.55] .498 [12.65] 4 5-103973-4 5-103972-4 5-103971-4 5-103970-4 5-103969-4 5-103968-4 103648-4
62.390 [60.71] .598 [15.19] 4 5-103973-5 5-103972-5 5-103971-5 5-103970-5 5-103969-5 5-103968-5 103648-5
71.400 [35.56] .698 [17.73] 2 5-103973-6 5-103972-6 5-103971-6 5-103970-6 5-103969-6 5-103968-6 103648-6
81.600 [40.64] .798 [20.27] 2 5-103973-7 5-103972-7 5-103971-7 5-103970-7 5-103969-7 5-103968-7 103648-7
91.800 [45.72] .898 [22.81] 2 5-103973-8 5-103972-8 5-103971-8 5-103970-8 5-103969-8 5-103968-8 103648-8
10 2.000 [50.80] .998 [23.35] 2 5-103973-9 5-103972-9 5-103971-9 5-103970-9 5-103969-9 5-103968-9 103648-9
11 2.200 [55.88] 1.098 [27.89] 2 6-103973-0 6-103972-0 6-103971-0 6-103970-0 6-103969-0 6-103968-0 1-103648-0
12 2.400 [60.96] 1.198 [30.43] 2 6-103973-1 6-103972-1 6-103971-1 6-103970-1 6-103969-1 6-103968-1 1-103648-1
No. of Dimensions Individual Receptacle Assembly Individual Receptacle Assembly Unloaded
Pos. B 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Housings
Plating A Plating B Plating C Plating A Plating B Plating C
13 1.298 [32.96] 6-103901-2 6-103649-2 6-103650-2 6-103900-2 6-103651-2 6-103652-2 1-103648-2
14 1.398 [35.51] 6-103901-3 6-103649-3 6-103650-3 6-103900-3 6-103651-3 6-103652-3 1-103648-3
15 1.498 [38.05] 6-103901-4 6-103649-4 6-103650-4 6-103900-4 6-103651-4 6-103652-4 1-103648-4
16 1.598 [40.59] 6-103901-5 6-103649-5 6-103650-5 6-103900-5 6-103651-5 6-103652-5 1-103648-5
17 1.698 [43.13] 6-103901-6 6-103649-6 6-103650-6 6-103900-6 6-103651-6 6-103652-6 1-103648-6
18 1.798 [45.67] 6-103901-7 6-103649-7 6-103650-7 6-103900-7 6-103651-7 6-103652-7 1-103648-7
19 1.898 [48.20] 6-103901-8 6-103649-8 6-103650-8 6-103900-8 6-103651-8 6-103652-8 1-103648-8
20 1.998 [50.75] 6-103901-9 6-103649-9 6-103650-9 6-103900-9 6-103651-9 6-103652-9 1-103648-9
21 2.098 [53.29] 7-103901-0 7-103649-0 7-103650-0 7-103900-0 7-103651-0 7-103652-0 2-103648-0
22 2.198 [55.83] 7-103901-1 7-103649-1 7-103650-1 7-103900-1 7-103651-1 7-103652-1 2-103648-1
23 2.298 [58.37] 7-103901-2 7-103649-2 7-103650-2 7-103900-2 7-103651-2 7-103652-2 2-103648-2
24 2.398 [60.91] 7-103901-3 7-103649-3 7-103650-3 7-103900-3 7-103651-3 7-103652-3 2-103648-3
25 2.498 [63.45] 7-103901-4 7-103649-4 7-103650-4 7-103900-4 7-103651-4 7-103652-4 2-103648-4
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully
inserted into housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics
pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.
234
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE High Pressure Receptacle Assemblies—Plain,
Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Receptacle Assemblies
5
Receptacle Contacts
(See Note 1)
Position No. 1 Indicator
(Farside)
1.120
[28.45]
.600
[15.24]
.098
[2.49]
.100
[2.54] Ty p .
B
Ty p .
A
.520
[13.21]
Strip Form Strip Form
No. of Dimensions Housings Receptacle Receptacle
Pos. Quantities Per Assembly Assembly
AB
Strip Segment 30-26 AWG 26-22 AWG
[.05-.15mm2] Wire [.12-.30mm2] Wire
21.980 [50.29] .198 [5.03] 10 5-104438-1 5-104439-1
31.490 [37.85] .298 [7.57] 5 5-104438-2 5-104439-2
41.990 [50.55] .398 [10.11] 5 5-104438-3 5-104439-3
51.990 [50.55] .498 [12.65] 4 5-104438-4 5-104439-4
62.390 [60.71] .598 [15.19] 4 5-104438-5 5-104439-5
71.400 [35.56] .698 [17.73] 2 5-104438-6 5-104439-6
81.600 [40.64] .798 [20.27] 2 5-104438-7 5-104439-7
91.800 [45.72] .898 [22.81] 2 5-104438-8 5-104439-8
10 2.000 [50.80] .998 [23.35] 2 5-104438-9 5-104439-9
11 2.200 [55.88] 1.098 [27.89] 2 6-104438-0 6-104439-0
12 2.400 [60.96] 1.198 [30.43] 2 6-104438-1 6-104439-1
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched
into “preload” windows. Contacts are fully inserted into housings automatically when terminated with
Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol grip
hand tool.
2. High pressure receptacle contacts can be made available in other housing styles and position sizes.
Contact your Tyco Electronics sales representative.
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
Tyco Electronics Manual Pistol
Grip Tool.
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze, duplex
plated .000030 [0.00076] gold on
contact area, .000050 [0.00127] min.
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an
insulation wall thickness of .015 [0.38]
max. Mating post length for preloaded
housings is .200 [5.08] min., .250 [6.35]
max.
Related Product Data
Mateable AMPMODU Products
Breakaway Headers — pages 102-
110, (with .230 mating length)
Reeled Breakaway Headers —
pages 106, 107 (with .230 mating
length)
Machine Applied Bandolier
Posts — page 163
Application Tooling —
page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278)
Product Specification
108-25034
Application Specification
114-25026
235
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE High Pressure Receptacle Assemblies – Guide Ribs
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Pin Assemblies
5
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
Tyco Electronics Manual Pistol
Grip Tool.
Material and Finish
Housing — Thermoplastic, black,
94V-0 rated
Contacts — Phosphor Bronze,
duplex plated .000030 [0.00076] gold
on contact area, .000050 [0.00127] min.
tin on crimp area, with entire contact
underplated .000050 [0.00127] nickel.
Related Product Data
Coupling Shrouds used with —
Single-Row — page 240
Double-Row — page 241
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Single-Row Coupling
Shrouds) —
Pin Assemblies (Polarized/
Latching) — pages 236, 237
Pin Assemblies with Guide Ribs
(installed in Panel Mount Pin
Shroud) — pages 238, 239, 242
Headers (Polarized/Latching) —
pages 244-252
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Double-Row Coupling
Shrouds) —
Headers, Shrouded, Double-Row
(.318 [8.08] mating post length,
.150 [3.81] end dimension) —
pages 119-121, 124, 125, 128, 129,
131-133
Application Tooling —
page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Receptacle Contacts
(See Note 1)
Position No. 1 Indicator
(Farside)
1.120
[28.45]
.600
[15.24]
.098
[2.49]
.100
[2.54] Ty p
B
Ty p .
A
.520
[13.21]
Strip Form Strip Form
No. of Dimensions Housings Receptacle Receptacle
Pos. Quantities Per Assembly Assembly
AB
Strip Segment 30-26 AWG 26-22 AWG
[.05-.15mm2] Wire [.12-.30mm2] Wire
21.980 [50.29] .198 [5.03] 10 5-147396-1 5-147030-3
31.490 [37.85] .298 [7.57] 5 5-147396-2 5-147030-4
41.990 [50.55] .398 [10.11] 5 5-147396-3 5-147030-1
51.990 [50.55] .498 [12.65] 4 5-147396-4 5-147030-2
62.390 [60.71] .598 [15.19] 4 5-147396-5 5-147030-5
71.400 [35.56] .698 [17.73] 2 5-147396-6 5-147030-6
81.600 [40.64] .798 [20.27] 2 5-147396-7 5-147030-7
91.800 [45.72] .898 [22.81] 2 5-147396-8 5-147030-8
10 2.000 [50.80] .998 [23.35] 2 5-147396-9 5-147030-9
11 2.200 [55.88] 1.098 [27.89] 2 6-147396-0 6-147030-0
12 2.400 [60.96] 1.198 [30.43] 2 6-147396-1 6-147030-1
236
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Pin Assemblies, Shrouded—Polarized/Latching,
Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
MTE Pin Assemblies
5
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
Tyco Electronics Manual Pistol
Grip Tool.
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze, plated
as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Related Product Data
Mateable AMPMODU Products —
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
Interchangeable Crimp Contacts —
page 254
Application Tooling —
page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
.200
[5.08]
.100
[2.54] Ty p .
Position No. 1
Indicator
1.470
[37.34]
.950
[24.13]
B
Ty p .
A
.520
[13.21]
.260
[6.60]
Pin Contacts
(See Note 1)
237
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Pin Assemblies, Shrouded—Strip Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline (Continued)
MTE Pin Assemblies, Shrouded—Individual Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Pin Assemblies
5
Housing Strip Form Pin Assembly Strip Form Pin Assembly
No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. AB
Per Strip Plating A Plating B Plating C Plating A Plating B Plating C Housings
Segment
22.360 [59.94] .295 [7.49] 8 5-103949-1 5-103948-1 5-103947-1 5-103946-1 5-103945-1 5-103944-1 103653-1
31.980 [50.29] .395 [10.03] 5 5-103949-2 5-103948-2 5-103947-2 5-103946-2 5-103945-2 5-103944-2 103653-2
41.980 [50.29] .495 [12.57] 4 5-103949-3 5-103948-3 5-103947-3 5-103946-3 5-103945-3 5-103944-3 103653-3
52.380 [60.45] .595 [15.11] 4 5-103949-4 5-103948-4 5-103947-4 5-103946-4 5-103945-4 5-103944-4 103653-4
61.390 [35.31] .695 [17.65] 2 5-103949-5 5-103948-5 5-103947-5 5-103946-5 5-103945-5 5-103944-5 103653-5
72.390 [60.71] .795 [20.19] 3 5-103949-6 5-103948-6 5-103947-6 5-103946-6 5-103945-6 5-103944-6 103653-6
81.790 [45.47] .895 [22.73] 2 5-103949-7 5-103948-7 5-103947-7 5-103946-7 5-103945-7 5-103944-7 103653-7
91.990 [50.57] .995 [25.27] 2 5-103949-8 5-103948-8 5-103947-8 5-103946-8 5-103945-8 5-103944-8 103653-8
10 2.190 [55.63] 1.095 [27.81] 2 5-103949-9 5-103948-9 5-103947-9 5-103946-9 5-103945-9 5-103944-9 103653-9
11 2.390 [60.71] 1.195 [30.35] 2 6-103949-0 6-103948-0 6-103947-0 6-103946-0 6-103945-0 6-103944-0 1-103653-0
12 2.590 [65.79] 1.295 [32.89] 2 6-103949-1 6-103948-1 6-103947-1 6-103946-1 6-103945-1 6-103944-1 1-103653-1
No. of Dimensions Individual Pin Assembly Individual Pin Assembly Unloaded
Pos. B 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Housings
Plating A Plating B Plating C Plating A Plating B Plating C
13 1.395 [35.43] 6-103894-2 6-103658-2 6-103659-2 6-103893-2 6-103660-2 6-103661-2 1-103653-2
14 1.495 [37.97] 6-103894-3 6-103658-3 6-103659-3 6-103893-3 6-103660-3 6-103661-3 1-103653-3
15 1.595 [40.51] 6-103894-4 6-103658-4 6-103659-4 6-103893-4 6-103660-4 6-103661-4 1-103653-4
16 1.695 [43.05] 6-103894-5 6-103658-5 6-103659-5 6-103893-5 6-103660-5 6-103661-5 1-103653-5
17 1.795 [45.59] 6-103894-6 6-103658-6 6-103659-6 6-103893-6 6-103660-6 6-103661-6 1-103653-6
18 1.895 [48.13] 6-103894-7 6-103658-7 6-103659-7 6-103893-7 6-103660-7 6-103661-7 1-103653-7
19 1.995 [50.67] 6-103894-8 6-103658-8 6-103659-8 6-103893-8 6-103660-8 6-103661-8 1-103653-8
20 2.095 [53.21] 6-103894-9 6-103658-9 6-103659-9 6-103893-9 6-103660-9 6-103661-9 1-103653-9
21 2.195 [55.75] 7-103894-0 7-103658-0 7-103659-0 7-103893-0 7-103660-0 7-103661-0 2-103653-0
22 2.295 [58.29] 7-103894-1 7-103658-1 7-103659-1 7-103893-1 7-103660-1 7-103661-1 2-103653-1
23 2.395 [60.83] 7-103894-2 7-103658-2 7-103659-2 7-103893-2 7-103660-2 7-103661-2 2-103653-2
24 2.495 [63.37] 7-103894-3 7-103658-3 7-103659-3 7-103893-3 7-103660-3 7-103661-3 2-103653-3
25 2.595 [65.91] 7-103894-4 7-103658-4 7-103659-4 7-103893-4 7-103660-4 7-103661-4 2-103653-4
Notes: 1. Pin assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted
into housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol
grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove pin contacts.
238
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Pin Assemblies—Guide Ribs,
Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
MTE Pin Assemblies
5
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
Tyco Electronics Manual Pistol
Grip Tool.
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze,
plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Related Product Data
Mateable AMPMODU MTE Products
(with Pin Assembly Installed in
Panel Mount Pin Shroud) —
pages 242, 243
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single Row
Coupling Shroud) — pages 232, 233,
235, 240
Interchangeable Crimp Contacts —
page 254
Application Tooling —
page 273
Performance Specifications —
page 225
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
.098
[2.49]
.100
[2.54] Ty p .
Pin Contacts
(See Note 1)
Position No. 1 Indicator
(Farside)
1.120
[28.45]
.600
[15.24]
B
Ty p .
A
.520
[13.21]
239
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Pin Assemblies—Strip Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline (Continued)
MTE Pin Assemblies—Individual Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Pin Assemblies
5
No. of Dimensions Individual Pin Assembly Individual Pin Assembly Unloaded
Pos. B 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Housings
Plating A Plating B Plating C Plating A Plating B Plating C
13 1.398 [35.51] 6-103896-2 6-103657-2 6-103656-2 6-103895-2 6-103655-2 6-103654-2 1-104503-2
14 1.498 [38.05] 6-103896-3 6-103657-3 6-103656-3 6-103895-3 6-103655-3 6-103654-3 1-104503-3
15 1.598 [40.59] 6-103896-4 6-103657-4 6-103656-4 6-103895-4 6-103655-4 6-103654-4 1-104503-4
16 1.698 [43.13] 6-103896-5 6-103657-5 6-103656-5 6-103895-5 6-103655-5 6-103654-5 1-104503-5
17 1.798 [45.67] 6-103896-6 6-103657-6 6-103656-6 6-103895-6 6-103655-6 6-103654-6 1-104503-6
18 1.898 [48.20] 6-103896-7 6-103657-7 6-103656-7 6-103895-7 6-103655-7 6-103654-7 1-104503-7
19 1.998 [50.75] 6-103896-8 6-103657-8 6-103656-8 6-103895-8 6-103655-8 6-103654-8 1-104503-8
20 2.098 [53.29] 6-103896-9 6-103657-9 6-103656-9 6-103895-9 6-103655-9 6-103654-9 1-104503-9
21 2.198 [55.83] 7-103896-0 7-103657-0 7-103656-0 7-103895-0 7-103655-0 7-103654-0 2-104503-0
22 2.298 [58.37] 7-103896-1 7-103657-1 7-103656-1 7-103895-1 7-103655-1 7-103654-1 2-104503-1
23 2.398 [60.91] 7-103896-2 7-103657-2 7-103656-2 7-103895-2 7-103655-2 7-103654-2 2-104503-2
24 2.498 [63.45] 7-103896-3 7-103657-3 7-103656-3 7-103895-3 7-103655-3 7-103654-3 2-104503-3
25 2.598 [65.99] 7-103896-4 7-103657-4 7-103656-4 7-103895-4 7-103655-4 7-103654-4 2-104503-4
Notes: 1. Pin assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted
into housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol grip
hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove pin contacts.
Housing Strip Form Pin Assembly Strip Form Pin Assembly
No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. AB
Per Strip Plating A Plating B Plating C Plating A Plating B Plating C Housings
Segment
21.980 [50.29] 0.198 [5.03] 10 5-103955-1 5-103954-1 5-103953-1 5-103952-1 5-103951-1 5-103950-1 104503-1
31.490 [37.85] 0.298 [7.57] 5 5-103955-2 5-103954-2 5-103953-2 5-103952-2 5-103951-2 5-103950-2 104503-2
41.990 [50.55] 0.398 [10.11] 5 5-103955-3 5-103954-3 5-103953-3 5-103952-3 5-103951-3 5-103950-3 104503-3
51.990 [50.55] 0.498 [12.65] 4 5-103955-4 5-103954-4 5-103953-4 5-103952-4 5-103951-4 5-103950-4 104503-4
62.390 [60.71] 0.598 [15.19] 4 5-103955-5 5-103954-5 5-103953-5 5-103952-5 5-103951-5 5-103950-5 104503-5
71.400 [35.56] 0.698 [17.73] 2 5-103955-6 5-103954-6 5-103953-6 5-103952-6 5-103951-6 5-103950-6 104503-6
81.600 [40.64] 0.798 [20.27] 2 5-103955-7 5-103954-7 5-103953-7 5-103952-7 5-103951-7 5-103950-7 104503-7
91.800 [45.72] 0.898 [22.81] 2 5-103955-8 5-103954-8 5-103953-8 5-103952-8 5-103951-8 5-103950-8 104503-8
10 2.000 [50.80] 0.998 [25.35] 2 5-103955-9 5-103954-9 5-103953-9 5-103952-9 5-103951-9 5-103950-9 104503-9
11 2.200 [55.88] 1.098 [27.89] 2 6-103955-0 6-103954-0 6-103953-0 6-103952-0 6-103951-0 6-103950-0 1-104503-0
12 2.400 [60.96] 1.198 [30.43] 2 6-103955-1 6-103954-1 6-103953-1 6-103952-1 6-103951-1 6-103950-1 1-104503-1
240
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Coupling Shrouds for MTE Receptacle Assemblies with Guide Ribs
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Coupling Shrouds
5Pin Assembly,
Shrouded
Polarized/Latching
(Refer to pages
236 & 237)
Receptacle
Assemblies with Guide
Ribs (Refer to pages
232, 233, 235)
Headers, Polarized/Latching,
Straight and Right Angle Post,
with or without Holddown
(See pages 244-252)
Single-Row
Material
Black thermoplastic, 94V-0 rated
Single-Row
Coupling Shroud
.582
[14.78]
A.307
[7.80]
Pin Assemblies with Guide
Ribs, Installed in Panel
Mount Pin Shroud (Refer to
pages 238, 239 & 242)
No. of Dimension Single-Row
Pos. A Coupling Shroud
4.485 [12.32] 103680-1
5.585 [14.86] 103680-2
6.685 [17.40] 103680-3
7.785 [19.94] 103680-4
8.885 [22.48] 103680-5
9.985 [25.02] 103680-6
10 1.085 [27.56] 103680-7
11 1.185 [30.10] 103680-8
12 1.285 [32.64] 103680-9
13 1.385 [35.18] 1-103680-0
14 1.485 [37.72] 1-103680-1
No. of Dimension Single-Row
Pos. A Coupling Shroud
15 1.585 [40.26] 1-103680-2
16 1.685 [42.80] 1-103680-3
17 1.785 [45.34] 1-103680-4
18 1.885 [47.88] 1-103680-5
19 1.985 [50.42] 1-103680-6
20 2.085 [52.96] 1-103680-7
21 2.185 [55.50] 1-103680-8
22 2.285 [58.04] 1-103680-9
23 2.385 [60.58] 2-103680-0
24 2.485 [63.12] 2-103680-1
25 2.585 [65.66] 2-103680-2
Typical Application of Single-Row Coupling Shroud and Mating AMPMODU MTE Products
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
241
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Coupling Shrouds for MTE Receptacle Assemblies with Guide Ribs (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Coupling Shrouds
5
AMPMODU Shrouded
Headers Double-Row, Straight
or Right–Angle Post1
Receptacle
Assemblies with Guide
Ribs (Refer to pages
232, 233 & 235)
1Mating AMPMODU Double-Row Shrouded Headers must have .318 [8.08] mating post length and .150 [3.81] dimension from centerline
1of last post to inside of end shroud wall.
Double-Row
Material
Black thermoplastic, 94V-0 rated
Double-Row
Coupling Shroud
.735
[18.67]
A
Position No. 1
Identification
No. of Dimension Double-Row
Pos. A Coupling Shroud
8.585 [14.86] 103681-1
10 .685 [17.40] 103681-2
12 .785 [19.94] 103681-3
14 .885 [22.48] 103681-4
16 .985 [25.02] 103681-5
18 1.085 [27.56] 104500-1
20 1.185 [30.10] 104500-2
22 1.285 [32.64] 104500-3
24 1.385 [35.18] 104500-4
26 1.485 [37.72] 104500-5
28 1.585 [40.26] 104500-6
30 1.685 [42.80] 104500-7
32 1.785 [45.34] 104500-8
34 1.885 [47.88] 104500-9
40 2.185 [55.50] 1-104500-0
50 2.685 [68.20] 1-104500-1
Typical Application of Double-Row Coupling Shroud and Mating AMPMODU Products
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
242
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Panel Mount Pin Shrouds for MTE Pin Assemblies
with Guide Ribs, Single-Row
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Panel Mount
Pin Shrouds
5
Material
Black thermoplastic, 94V-0 rated
.990
[25.15]
A
Position No. 1
Identification
No. of Dimensions Panel Mount
Pos. AB
Pin Shroud
2.735 [18.67] .625 [15.88] 103682-1
3.835 [21.21] .725 [18.42] 103682-2
4.935 [23.75] .825 [20.96] 103682-3
51.035 [26.29] .925 [23.50] 103682-4
61.135 [28.83] 1.025 [26.04] 103682-5
71.235 [31.37] 1.125 [28.58] 103682-6
81.335 [33.91] 1.225 [31.12] 103682-7
91.435 [36.45] 1.325 [33.66] 103682-8
10 1.535 [38.99] 1.425 [36.20] 103682-9
11 1.635 [41.53] 1.525 [38.74] 1-103682-0
12 1.735 [44.07] 1.625 [41.28] 1-103682-1
13 1.835 [46.61] 1.725 [43.82] 1-103682-2
.250
[6.35]
.310
[7.87]
.320
[8.13]
.270
[6.86]
.320
[8.13]
B
No. of Dimensions Panel Mount
Pos. AB
Pin Shroud
14 1.935 [49.15] 1.825 [46.36] 1-103682-3
15 2.035 [51.69] 1.925 [48.90] 1-103682-4
16 2.135 [54.23] 2.025 [51.44] 1-103682-5
17 2.235 [56.77] 2.125 [53.98] 1-103682-6
18 2.335 [59.31] 2.225 [56.52] 1-103682-7
19 2.435 [61.85] 2.325 [59.06] 1-103682-8
20 2.535 [64.39] 2.425 [61.60] 1-103682-9
21 2.635 [66.93] 2.525 [64.14] 2-103682-0
22 2.735 [69.47] 2.625 [66.68] 2-103682-1
23 2.835 [72.01] 2.725 [69.22] 2-103682-2
24 2.935 [74.55] 2.825 [71.76] 2-103682-3
25 3.035 [77.09] 2.925 [74.30] 2-103682-4
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
243
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Panel Mount Pin Shrouds for MTE Pin Assemblies
with Guide Ribs, Single-Row (Continued)
AMPMODU Interconnection System
MTE Panel Mount
Pin Shrouds
5
Material
Black thermoplastic, 94V-0 rated
Typical Application of Panel Mount Pin Shroud and Mating AMPMODU Products
Pin Assembly with
Guide Ribs (Refer to
pages 238 & 239)
Receptacle Assemblies with Guide
Ribs, Installed in
Single-Row Coupling Shroud
(Refer to pages 232, 233, 235 & 240)
Receptacle Assembly,
Polarized/Latching (Refer
to pages 230 & 231)
Panel Mount
Pin Shroud
Rear of Panel
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
244
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Headers, Shrouded Polarized/Latching,
Single-Row .100 [2.54] Centerline
AMPMODU Interconnection System
MTE Headers
5
.025 [0.64] Square
Straight Post (With or
Without Swaged Tail)
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
post
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
pages 232, 233, 235, 240
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
.060
[1.52]
.535
[13.59]
Position No. 1 Indicator
.120
[3.05]
.200
[5.08]
.130
[3.30]
.060
[1.52]
.100
[2.54]
.100
[2.54] Ty p .
.200
[5.08] Ref.
(Contact Area)
.230
[5.84]
.350
[8.89]
*±.003 [±0.08]; tolerances not to accumulate within one connector pattern.
Note: Swaged retention tails are provided in a minimum of two locations per header.
Recommended PC Board Hole Layout
.035±.003 Dia. Typ.
[0.89±0.08]
or
.040±.003 Dia. Typ.
[1.02±0.08]
(for Retention Tails)
A
B
C
X
X
.275
[6.98]
.100*
[2.54] Ty p .
C
Swaged Retention Tail
(See Note)
Section X-X
245
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Headers, Shrouded Polarized/Latching,
Single-Row .100 [2.54] Centerline (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Headers
5
No. of Dimensions Polarized/Latching Header With Swage Polarized/Latching Header Without Swage
Pos. A B C Plating A Plating B Plating C Plating A Plating B Plating C
2.300 [7.62] .220 [5.59] .100 [2.54] 5-103908-1 5-104362-1 5-103669-1 5-103735-1 5-104363-1 5-103639-1
3.400 [10.16] .320 [8.13] .200 [5.08] 5-103908-2 5-104362-2 5-103669-2 5-103735-2 5-104363-2 5-103639-2
4.500 [12.70] .420 [10.67] .300 [7.62] 5-103908-3 5-104362-3 5-103669-3 5-103735-3 5-104363-3 5-103639-3
5.600 [15.24] .520 [13.21] .400 [10.16] 5-103908-4 5-104362-4 5-103669-4 5-103735-4 5-104363-4 5-103639-4
6.700 [17.78] .620 [15.75] .500 [12.70] 5-103908-5 5-104362-5 5-103669-5 5-103735-5 5-104363-5 5-103639-5
7.800 [20.32] .720 [18.29] .600 [15.24] 5-103908-6 5-104362-6 5-103669-6 5-103735-6 5-104363-6 5-103639-6
8.900 [22.86] .820 [20.83] .700 [17.78] 5-103908-7 5-104362-7 5-103669-7 5-103735-7 5-104363-7 5-103639-7
91.000 [25.40] .920 [23.37] .800 [20.32] 5-103908-8 5-104362-8 5-103669-8 5-103735-8 5-104363-8 5-103639-8
10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-103908-9 5-104362-9 5-103669-9 5-103735-9 5-104363-9 5-103639-9
11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40] 6-103908-0 6-104362-0 6-103669-0 6-103735-0 6-104363-0 6-103639-0
12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-103908-1 6-104362-1 6-103669-1 6-103735-1 6-104363-1 6-103639-1
13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48] 6-103908-2 6-104909-2 6-103669-2 6-103735-2 6-104910-2 6-103639-2
14 1.500 [38.10] 1.420 [36.07] 1.300 [33.02] 6-103908-3 6-104909-3 6-103669-3 6-103735-3 6-104910-3 6-103639-3
15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56] 6-103908-4 6-104909-4 6-103669-4 6-103735-4 6-104910-4 6-103639-4
16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10] 6-103908-5 6-104909-5 6-103669-5 6-103735-5 6-104910-5 6-103639-5
17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64] 6-103908-6 6-104909-6 6-103669-6 6-103735-6 6-104910-6 6-103639-6
18 1.900 [48.26] 1.820 [46.23] 1.700 [43.18] 6-103908-7 6-104909-7 6-103669-7 6-103735-7 6-104910-7 6-103639-7
19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72] 6-103908-8 6-104909-8 6-103669-8 6-103735-8 6-104910-8 6-103639-8
20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26] 6-103908-9 6-104909-9 6-103669-9 6-103735-9 6-104910-9 6-103639-9
21 2.200 [55.88] 2.120 [53.85] 2.000 [50.80] 7-103908-0 7-104909-0 7-103669-0 7-103735-0 7-104910-0 7-103639-0
22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34] 7-103908-1 7-104909-1 7-103669-1 7-103735-1 7-104910-1 7-103639-1
23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88] 7-103908-2 7-104909-2 7-103669-2 7-103735-2 7-104910-2 7-103639-2
24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42] 7-103908-3 7-104909-3 7-103669-3 7-103735-3 7-104910-3 7-103639-3
25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96] 7-103908-4 7-104909-4 7-103669-4 7-103735-4 7-104910-4 7-103639-4
Notes: 1. Selectively loaded headers are available, consult Tyco Electronics.
2. Use Keying Tool No. 91417-1 to remove post for keying.
246
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline
AMPMODU Interconnection System
MTE Headers
5
.025 [0.64] Square
Right-Angle Post
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
post
Recommended PC Board Hole Layout
*±.003 [±0.08]; tolerance not to accumulate within one connector pattern.
Recommended PC Board Hole Layout
(PC board thickness (for Holddown Feature) is .062±.008 [1.57±0.20])
*±.003 [±0.08]; tolerance not to accumulate within one connector pattern.
.535
[13.59]
With Holddown
.060
[1.52]
.120
[3.05]
.200
[5.08]
.130
[3.30]
.060
[1.52]
.100
[2.54]
.100
[2.54] Ty p . .200
[5.08] Ref.
(Contact Area)
.230
[5.84]
.350
[8.89]
A
B
C
X
X
.275
[6.99]
.365
[9.27]
.145
[3.68]
.100*
[2.54] Ty p .
.340±.003
[8.64±0.08] Ty p . .055±.003
[1.40±0.08] Ty p .
C
.035±.003
[0.89±0.08] Dia. Typ.
.134±.003
[3.40±0.08] Dia.
(2 Plc.)
.535
[13.59]
.060
[1.52]
.120
[3.05]
.200
[5.08]
.130
[3.30]
.060
[1.52]
.100
[2.54]
.100
[2.54] Ty p .
.200
[5.08] Ref.
(Contact Area)
.230
[5.84]
.350
[8.89]
A
B
C
X
X
.275
[6.99]
.145
[3.68]
.100*
[2.54] Ty p .
C
.035±.003
[0.89±0.08] Dia. Typ.
Section X-X
Section X-X
Position No. 1 Indicator
Position No. 1 Indicator
Without Holddown
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies
(Latching) — pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
pages 232, 233, 235, 240
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
247
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Headers
5
No. of Dimensions Latching Header With Hold Down Latching Header Without Hold Down
Pos. A B C Plating A Plating B Plating C Plating A Plating B Plating C
2.300 [7.62] .220 [5.59] .100 [2.54] 5-103904-1 5-103673-1 5-103672-1 5-104935-5 5-103635-1 5-103634-1
3.400 [10.16] .320 [8.13] .200 [5.08] 5-103904-2 5-103673-2 5-103672-2 5-104935-3 5-103635-2 5-103634-2
4.500 [12.70] .420 [10.67] .300 [7.62] 5-103904-3 5-103673-3 5-103672-3 5-104935-1 5-103635-3 5-103634-3
5.600 [15.24] .520 [13.21] .400 [10.16] 5-103904-4 5-103673-4 5-103672-4 5-104935-6 5-103635-4 5-103634-4
6.700 [17.78] .620 [15.75] .500 [12.70] 5-103904-5 5-103673-5 5-103672-5 5-104935-7 5-103635-5 5-103634-5
7.800 [20.32] .720 [18.29] .600 [15.24] 5-103904-6 5-103673-6 5-103672-6 5-104935-8 5-103635-6 5-103634-6
8.900 [22.86] .820 [20.83] .700 [17.78] 5-103904-7 5-103673-7 5-103672-7 5-104935-2 5-103635-7 5-103634-7
91.000 [25.40] .920 [23.37] .800 [20.32] 5-103904-8 5-103673-8 5-103672-8 5-104935-9 5-103635-8 5-103634-8
10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-103904-9 5-103673-9 5-103672-9 6-104935-0 5-103635-9 5-103634-9
11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40] 6-103904-0 6-103673-0 6-103672-0 6-104935-1 6-103635-0 6-103634-0
12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-103904-1 6-103673-1 6-103672-1 5-104935-4 6-103635-1 6-103634-1
13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48] 6-103904-2 6-103673-2 6-103672-2 6-104935-2 6-103635-2 6-103634-2
14 1.500 [38.10] 1.420 [36.07] 1.300 [33.02] 6-103904-3 6-103673-3 6-103672-3 6-104935-3 6-103635-3 6-103634-3
15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56] 6-103904-4 6-103673-4 6-103672-4 6-104935-4 6-103635-4 6-103634-4
16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10] 6-103904-5 6-103673-5 6-103672-5 6-104935-5 6-103635-5 6-103634-5
17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64] 6-103904-6 6-103673-6 6-103672-6 6-104935-6 6-103635-6 6-103634-6
18 1.900 [48.26] 1.820 [46.23] 1.700 [43.18] 6-103904-7 6-103673-7 6-103672-7 6-104935-7 6-103635-7 6-103634-7
19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72] 6-103904-8 6-103673-8 6-103672-8 6-104935-8 6-103635-8 6-103634-8
20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26] 6-103904-9 6-103673-9 6-103672-9 6-104935-9 6-103635-9 6-103634-9
21 2.200 [55.88] 2.120 [53.85] 2.000 [50.80] 7-103904-0 7-103673-0 7-103672-0 7-104935-0 7-103635-0 7-103634-0
22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34] 7-103904-1 7-103673-1 7-103672-1 7-104935-1 7-103635-1 7-103634-1
23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88] 7-103904-2 7-103673-2 7-103672-2 7-104935-2 7-103635-2 7-103634-2
24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42] 7-103904-3 7-103673-3 7-103672-3 7-104935-3 7-103635-3 7-103634-3
25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96] 7-103904-4 7-103673-4 7-103672-4 7-104935-4 7-103635-4 7-103634-4
Notes: 1. Selectively loaded headers are available, consult Tyco Electronics.
2. Use Keying Tool No. 91417-1 to remove post for keying.
248
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Headers
5
.025 [0.64] Square Straight
Post (With Swaged Tails
and PC Board Orientation)
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, plated .000100
[0.00254] tin over .000050 [0.00127]
nickel on entire post
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
pages 232, 233, 235, 240
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
.535
[13.59]
.120
[3.05]
.100*
[2.54]
X
X
A
.260
[6.60]
Ty p .
No. of Dimensions Latching
Pos. ABC Header
2.300 [7.62] .220 [5.59] .100 [2.54] 5-104450-1
3.400 [10.16] .320 [8.13] .200 [5.08] 5-104450-2
4.500 [12.70] .420 [10.67] .300 [7.62] 5-104450-3
5.600 [15.24] .520 [13.21] .400 [10.16] 5-104450-4
6.700 [17.78] .620 [15.75] .500 [12.70] 5-104450-5
7.800 [20.32] .720 [18.29] .600 [15.24] 5-104450-6
8.900 [22.86] .820 [20.83] .700 [17.78] 5-104450-7
91.000 [25.40] .920 [23.37] .800 [20.32] 5-104450-8
10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-104450-9
Section X-X
.060
[1.52]
(2 Plc.)
.200
[5.08]
B
C
.060
[1.52] .100
[2.54]
Ty p .
.050
[1.27]
.100
[2.54]
.070
[1.78]
.050
[1.27]
Dia.
C
.065±.003
[1.65±0.08] Dia.
.135±.003
[3.43±0.08]
.075±.003
[1.91±0.08]
.040±.003 Dia. Typ.
[1.02±0.08]
(for Retention Tails)
.230
[5.84] .130
[3.30]
.350
[8.89]
Swaged Retention Tail
(See Note)
*±.003 [±0.08]; tolerances not to accumulate within one connector pattern.
Note: Swaged retention tails are provided in a minimum of two locations per header.
Recommended PC Board Hole Layout
Position No. 1 Indicator
249
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Headers, Through-hole, Surface Mount Compatible,
Shrouded Polarized/Latching, Single-Row .100 [2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Headers
5
.025 [0.64] Square Straight
Post (With Swaged Tails
and PC Board Orientation)
.120
[3.05] .100
[2.54] .130
[3.30]
.060
[1.52]
.230
[5.84]
.060
[1.52]
.535
[13.59]
B
C
X
X
.262
[6.65]
.350
[8.89]
.200
[5.08] Ref.
Ty p .
No. of Dimensions Polarized/Latching
Pos. ABC
Header, High-Temp
2.300 [7.62] .220 [5.59] .100 [2.54] 5-104809-1
3.400 [10.16] .320 [8.13] .200 [5.08] 5-104809-2
4.500 [12.70] .420 [10.67] .300 [7.62] 5-104809-3
5.600 [15.24] .520 [13.21] .400 [10.16] 5-104809-4
6.700 [17.78] .620 [15.75] .500 [12.70] 5-104809-5
7.800 [20.32] .720 [18.29] .600 [15.24] 5-104809-6
8.900 [22.86] .820 [20.83] .700 [17.78] 5-104809-7
91.000 [25.40] .920 [23.37] .800 [20.32] 5-104809-8
10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-104809-9
11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40] 6-104809-0
12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-104809-1
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min tin on solder tail, with
entire post underplated .000050
[0.00127] nickel
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
pages 232, 233, 235, 240
Receptacle Assemblies (Polarized
Latching) — pages 230, 231
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Section X-X
A
(Contact Area)
.100
[2.54]
.200
[5.08]
.100*
[2.54] Ty p .
Swaged Retention Tail
(See Note)
Position No. 1 Indicator
.020±.002
[0.51±0.05]
Ty p .
Header Profile (Shown for
orientation purposes only)
.040±.002
[1.02±0.05] Ty p .
.040±.003 Dia. Typ.
[1.02±0.08]
Plated-Thru Hole
Recommended PC Board Hole Layout
(Stencil Thickness = .010 [0.25])
*±.003 [±0.08] tolerance not to accumulate within one connector pattern
.135±.003
[3.43±0.08]
.065±.003
[1.65±0.08]
.075±.003
[1.90±0.08]
.180±.002
[4.57±0.05]
250
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Headers, Polarized/Latching, Through-Hole,
Surface Mount Compatible, Single-Row, .100 [2.54] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Headers
5
Section X-X
B
X
.535
[13.59]
A
.262
[6.65]
.200
[5.08] Ref.
(Contact Area)
.060
[1.52]
(2 Plc.)
.120
[3.05]
.060
[1.52]
.100
[2.54]
.180
[4.57]
.350
[8.89] .145
[3.68]
.230
[5.84]
.100*
[2.54] Ty p .
.058±.003
[1.47±0.08]
(2 Plc.)
.340±.003
[8.64±0.08] .090±.002
[2.29±0.05]
.035±.003 Dia. Typ.
[0.89±0.08]
Plated-Thru Hole
*±.003 [±0.08]; tolerance is not to accumulate within one connector pattern.
Recommended PC Board
(Stencil Thickness = .010 [0.25])
.025 [0.64] Square
Right-Angle Post (With
Holddown)
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min. tin on solder tail, with
entire post underplated .000050
[0.00127] nickel
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies (Polarized/
Latching) — pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
X
C
.100
[2.54] Ty p .
.093+.003
.093-.000
2.36+0.08
.093
-.000
.145
[3.68]
.200
[5.08]
.070±.002
[1.78±0.51] Ty p .
Dia.
(2 Plc.)
][
C
No. of Dimensions Right-Angle
Header
Pos. ABC
with Hold Down
2.300 [7.62] .220 [5.59] .100 [2.54] 5-104361-1
3.400 [10.16] .320 [8.13] .200 [5.08] 5-104361-2
4.500 [12.70] .420 [10.67] .300 [7.62] 5-104361-3
5.600 [15.24] .520 [13.21] .400 [10.16] 5-104361-4
6.700 [17.78] .620 [15.75] .500 [12.70] 5-104361-5
7.800 [20.32] .720 [18.29] .600 [15.24] 5-104361-6
8.900 [22.86] .820 [20.83] .700 [17.78] 5-104361-7
91.000 [25.40] .920 [23.37] .800 [20.32] 5-104361-8
10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-104361-9
11 1.200 [30.48] 1.120 [28.44] 1.000 [25.40] 6-104361-0
12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-104361-1
13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48] 6-104361-2
No. of Dimensions Right-Angle
Header
Pos. ABC
with Hold Down
14 1.500 [38.10] 1.420 [36.07] 1.300 [33.02] 6-104361-3
15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56] 6-104361-4
16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10] 6-104361-5
17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64] 6-104361-6
18 1.900 [48.26] 1.820 [46.23] 1.700 [43.18] 6-104361-7
19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72] 6-104361-8
20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26] 6-104361-9
21 2.200 [55.88] 2.120 [53.85] 2.000 [50.80] 7-104361-0
22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34] 7-104361-1
23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88] 7-104361-2
24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42] 7-104361-3
25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96] 7-104361-4
Position No. 1 Indicator
251
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Headers
5
Note: All part numbers are RoHS
compliant.
No. of Dimensions Right-Angle Latching SMT Headers
Pos. A B C D E Plating A Plating B Plating C
2.400 [10.16] .220 [5.59] .100 [2.54] .140 [3.56] .290 [7.37] 5-147323-1 5-147278-1 5-147324-1
3.500 [12.70] .320 [8.13] .200 [5.08] .190 [4.83] .390 [9.91] 5-147323-2 5-147278-2 5-147324-2
4.600 [15.24] .420 [10.67] .300 [7.62] .240 [6.10] .490 [12.45] 5-147323-3 5-147278-3 5-147324-3
5.700 [17.78] .520 [13.21] .400 [10.16] .290 [7.37] .590 [14.99] 5-147323-4 5-147278-4 5-147324-4
6.800 [20.32] .620 [15.75] .500 [12.70] .340 [8.64] .690 [17.53] 5-147323-5 5-147278-5 5-147324-5
7.900 [22.86] .720 [18.29] .600 [15.24] .390 [9.91] .790 [20.07] 5-147323-6 5-147278-6 5-147324-6
81.000 [25.40] .820 [20.83] .700 [17.78] .440 [11.18] .890 [22.61] 5-147323-7 5-147278-7 5-147324-7
91.100 [27.94] .920 [23.37] .800 [20.32] .490 [12.45] .990 [25.15] 5-147323-8 5-147278-8 5-147324-8
10 1.200 [30.48] 1.020 [25.91] .900 [22.86] .540 [13.72] 1.090 [27.69] 5-147323-9 5-147278-9 5-147324-9
11 1.300 [33.02] 1.120 [28.45] 1.000 [25.40] .590 [14.99] 1.190 [30.23] 6-147323-0 6-147278-0 6-147324-0
12 1.400 [35.56] 1.220 [30.99] 1.100 [27.94] .640 [16.26] 1.290 [32.77] 6-147323-1 6-147278-1 6-147324-1
13 1.500 [38.10] 1.320 [33.53] 1.200 [30.48] .690 [17.53] 1.390 [35.31] 6-147323-2 6-147278-2 6-147324-2
14 1.600 [40.64] 1.420 [36.07] 1.300 [33.02] .740 [18.80] 1.490 [37.85] 6-147323-3 6-147278-3 6-147324-3
15 1.700 [43.18] 1.520 [38.61] 1.400 [35.56] .790 [20.07] 1.590 [40.39] 6-147323-4 6-147278-4 6-147324-4
16 1.800 [45.72] 1.620 [41.15] 1.500 [38.10] .840 [21.34] 1.690 [42.93] 6-147323-5 6-147278-5 6-147324-5
17 1.900 [48.26] 1.720 [43.69] 1.600 [40.64] .890 [22.61] 1.790 [45.47] 6-147323-6 6-147278-6 6-147324-6
18 2.000 [50.80] 1.820 [46.23] 1.700 [43.18] .940 [23.88] 1.890 [48.01] 6-147323-7 6-147278-7 6-147324-7
19 2.100 [53.34] 1.920 [48.77] 1.800 [45.72] .990 [25.15] 1.990 [50.55] 6-147323-8 6-147278-8 6-147324-8
20 2.200 [55.88] 2.020 [51.31] 1.900 [48.26] 1.040 [26.42] 2.090 [53.09] 6-147323-9 6-147278-9 6-147324-9
21 2.300 [58.42] 2.120 [53.85] 2.000 [50.80] 1.090 [27.69] 2.190 [55.63] 7-147323-0 7-147278-0 7-147324-0
22 2.400 [60.96] 2.220 [56.39] 2.100 [53.34] 1.140 [28.96] 2.290 [58.17] 7-147323-1 7-147278-1 7-147324-1
23 2.500 [63.50] 2.320 [58.93] 2.200 [55.88] 1.190 [30.23] 2.390 [60.71] 7-147323-2 7-147278-2 7-147324-2
24 2.600 [66.04] 2.420 [61.47] 2.300 [58.42] 1.240 [31.50] 2.490 [63.25] 7-147323-3 7-147278-3 7-147324-3
25 2.700 [68.58] 2.520 [64.01] 2.400 [60.96] 1.290 [32.77] 2.590 [65.79] 7-147323-4 7-147278-4 7-147324-4
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Posts — Brass, plated as follows:
Plating A — Duplex plated .000030
[.00076] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating B — Duplex plated .000015
[.00038] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating C — .000100 [.00254] tin over
.000050 [.00127] nickel on entire post
Recommended
PC Board Layout
(Refer to MTE Application Spec.
114-25026 for Stencil Aperture Layout
Using .006 [0.152] or .008 [0.203]
Stencil Thickness)
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies (Polarized/
Latching) — pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
.535
[13.59]
.140
[3.56]
.165±.003
[4.19±0.07]
.133
[3.38]
.265
[6.73]
D
E
C
.070±.002 Ty p
[1.78±0.05]
.054/.039
[1.37/0.99]
Ø.085±.002
[2.16±0.05]
.136±.001
[3.45±0.02]
2 Plc
.190±.001
[4.83±0.02]
2 Plc
.065 Min Pad on
[1.65] Underside 2 Plc
.038 2 Plc
[0.97]
.120
[3.05]
A
B
C
K
K
.120
[3.05]
.350
[8.89]
.200
[5.08] Ref
Contact Area
.200
[5.08] .002
[0.05]
See L
View L
.076
[1.93]
.288
[7.32]
Ref
.262
[6.65]
.457
[11.61]
Ref
Position No. 1 Indicator
Ø.047 + .002
-.003
[1.19 + 0.05
- 0.07]
.140±.002
[3.56±0.05]
(Tangent
of heel)
(Plated thru hole)
.025
[0.64] Ty p .
Section K-K
Recommended PC Board Layout
MTE Headers, Right-Angle, Polarized/Latching, Surface Mount
252
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MTE Headers, Vertical, Polarized/Latching, Surface Mount
AMPMODU Interconnection System
MTE Headers
5
.075
[1.90]
.535
[13.59]
.063
[1.52]
E
.025 Typ.
[0.62]
.313
[7.62]
A
B
K
K
.025
[0.64] Typ.
.100
[2.54]
.200
[5.08]
.120
[3.05]
.230
[5.84]
Pick and Place Cap
Position No. 1 Indicator
Position No. 1
.100
[2.54] Ty p .
.055±.003
[1.40±0.08]
Ø .052 + .002
– .003
[1.32 + 0.05
– 0.07]
.070±.002
[1.78±0.05]
.088±.003
[2.25±0.08]
D
C0.06
[1.53]
.113
[2.88]
.227
[5.76]
No. of Dimensions Vertical SMT Headers
Pos. A B C D E Plating A Plating B Plating C
2.300[7.62] .220[5.59] .100[2.54] .220[5.60] .110[2.80] 5-1375583-1 5-1375582-1 5-1375549-1
3.400[10.16] .320[8.13] .200[5.08] .320[8.14] .160[4.07] 5-1375583-2 5-1375582-2 5-1375549-2
4.500[12.70] .420[10.67] .300[7.62] .420[10.68] .210[5.34] 5-1375583-3 5-1375582-3 5-1375549-3
5.600[15.24] .520[13.21] .400[10.16] .520[13.22] .260[6.61] 5-1375583-4 5-1375582-4 5-1375549-4
6.700[17.78] .620[15.75] .500[12.70] .620[15.76] .310[7.88] 5-1375583-5 5-1375582-5 5-1375549-5
7.800[20.32] .720[18.29] .600[15.24] .720[18.30] .360[9.15] 5-1375583-6 5-1375582-6 5-1375549-6
8.900[22.86] .820[20.83] .700[17.78] .820[20.84] .410[10.42] 5-1375583-7 5-1375582-7 5-1375549-7
91.000[25.40] .920[23.37] .800[20.32] .920[23.38] .460[11.69] 5-1375583-8 5-1375582-8 5-1375549-8
10 1.100[27.94] 1.020[25.91] .900[22.86] 1.020[25.92] .510[12.96] 5-1375583-9 5-1375582-9 5-1375549-9
11 1.200[30.48] 1.120[28.45] 1.000[25.40] 1.120[28.46] .560[14.23] 6-1375583-0 6-1375582-0 6-1375549-0
12 1.300[33.02] 1.220[30.99] 1.100[27.94] 1.220[31.00] .610[15.50] 6-1375583-1 6-1375582-1 6-1375549-1
13 1.400[35.56] 1.320[33.53] 1.200[30.48] 1.320[33.54] .660[16.77] 6-1375583-2 6-1375582-2 6-1375549-2
14 1.500[38.10] 1.420[36.07] 1.300[33.02] 1.420[36.08] .710[18.04] 6-1375583-3 6-1375582-3 6-1375549-3
15 1.600[40.64] 1.520[38.61] 1.400[35.56] 1.520[38.62] .760[19.31] 6-1375583-4 6-1375582-4 6-1375549-4
16 1.700[43.18] 1.620[41.15] 1.500[38.10] 1.620[41.16] .810[20.58] 6-1375583-5 6-1375582-5 6-1375549-5
17 1.800[45.72] 1.720[43.69] 1.600[40.64] 1.720[43.70] .860[21.85] 6-1375583-6 6-1375582-6 6-1375549-6
18 1.900[48.26] 1.820[46.23] 1.700[43.18] 1.820[46.24] .910[23.12] 6-1375583-7 6-1375582-7 6-1375549-7
19 2.000[50.80] 1.920[48.77] 1.800[45.72] 1.920[48.78] .960[24.39] 6-1375583-8 6-1375582-8 6-1375549-8
20 2.100[53.34] 2.020[51.31] 1.900[48.26] 2.020[51.32] 1.010[25.66] 6-1375583-9 6-1375582-9 6-1375549-9
21 2.200[55.88] 2.120[53.85] 2.000[50.80] 2.120[53.86] 1.060[26.93] 7-1375583-0 7-1375582-0 7-1375549-0
22 2.300[58.42] 2.220[56.39] 2.100[53.34] 2.220[56.40] 1.110[28.20] 7-1375583-1 7-1375582-1 7-1375549-1
23 2.400[60.96] 2.320[58.93] 2.200[55.88] 2.320[58.94] 1.160[29.47] 7-1375583-2 7-1375582-2 7-1375549-2
24 2.500[63.50] 2.420[61.47] 2.300[58.42] 2.420[61.48] 1.210[30.74] 7-1375583-3 7-1375582-3 7-1375549-3
25 2.600[66.04] 2.520[64.01] 2.400[60.96] 2.520[64.02] 1.260[32.01] 7-1375583-4 7-1375582-4 7-1375549-4
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Posts — Brass, plated as follows:
Plating A — Duplex plated .000030
[.00076] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating B — Duplex plated .000015
[.00038] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating C — .000100 [.00254] tin
over .000050 [.00127] nickel on entire
post
Recommended
PC Board Layout
(Refer to MTE Application Spec.
114-25026 for Stencil Aperature Layout
using .006 [0.152] or .008 [0.203]
stencil thickness
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies (Polarized/
Latching) — pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Ø
Plated Thru-Hole
Section K-K
Note: All part numbers are RoHS
compliant.
Recommended PC Board Layout
253
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Interchangeable Contacts, Wire Crimp (Snap-In)
AMPMODU Interconnection System
MTE Headers
5
Material and Finish
Copper alloy C7025, plated as follows:
Plating A — Duplex plated .000030
[0.00076] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating B — Duplex plated .000015
[0.00038] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating C — .000100 [0.00254] min.
tin over .000050 [0.00127] min. nickel
on entire contact
.068
[1.73]
CC
.060
[1.52]
.460
[11.68]
Section C - C
.012
[0.30]
Gap
Heavy Duty Miniature
Wire Size Applicator for
Applicator for
Range Ins.
Finish
Contact Part No. AMP-O-MATIC Hand
AWG [mm2]
Dia. (Standard Pressure) AMP-O-LECTRIC Stripper/Crimper Tool
Range Strip Form Loose Piece Machine* Machine Nos.
.025-.060 Plating A 1-104481-1 1-104481-3
32-28 0.03-0.08 0.64-1.52 Plating B 1-104481-0 1-104481-2 567296-2 466980-1 91518-1
Plating C 5-104481-2 5-104481-6
.025-.060 Plating A 1-104480-3 1-104480-6
26-22 0.13-0.3 0.64-1.52 Plating B 1-104480-2 1-104480-5 567297-2 466981-1 91518-1
Plating C 1-104480-7 1-104480-4
.025-.060 Plating A 1-104479-0 1-104479-3
24-20 0.2-0.5 0.64-1.52 Plating B 104479-9 1-104479-2 567298-2 466982-1 91551-1
Plating C 104479-8 1-104479-1
*For use with Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the Model “G” machines (shown
on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Note: These wire crimp contacts can be intermixed with insulation displacement crimp contacts.
Keying Plug
Part No. 104072-1
Ten plugs are supplied per strip.
Order quantity reflects the number
of strips required.
Extraction/Lance Reset
Tool No. 843477-1
Short Point Receptacles
Related Product Data
Performance Characteristics —
page 221
Housings used in —
Short Point—pages 223, 224
AMPMODU MTE Unloaded
Housings — pages 228-233
Application Tooling—
pages 270-272
Technical Documents —
pages 277, 278
Product Specification
108-1472, 108-1472-1
Application Specification
114-25038
Note: All part numbers are RoHS compliant.
254
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Interchangeable Contacts, Wire Crimp (Snap-In) (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
MTE Contacts
5
Material and Finish
Phosphor bronze, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000030
[0.00076] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000030
[0.00076] min. tin on solder area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Extraction/Lance Reset
Tool No. 843477-1
Contact Heavy Duty Applicator for
Wire Size Ins. Dia. Part No. Miniature Applicator AMP-O-MATIC Hand
Range Range Finish (Standard Pressure) for AMP-O-LECTRIC Stripper/ Tool
AWG [mm2] Strip Loose Machine* Crimper Nos.
Form Piece Machine
.025-.054 Plating A 5-104506-6 5-104506-7
32-28 0.03-0.08 0.64-1.37 Plating B 5-104506-4 5-104506-5 — — 58342-2
Plating C 5-104506-2 5-104506-3
.036-.054 Plating A 5-104505-6 5-104505-7
26-22 0.14-0.32 0.91-1.37 Plating B 5-104505-4 5-104505-5 567239-2 466983-1 91531-1
Plating C 5-104505-2 5-104505-3
*For use with AMP-O-LECTRIC Model “K” machines. Call Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Note: These wire crimp contacts can be intermixed with insulation displacement crimp contacts.
.025
[0.64]
.810
[20.57]
.025
[0.64]
Pins
Related Product Data
Performance Characteristics —
page 221
AMPMODU MTE Unloaded
Housings — pages 228-233
Application Tooling —
pages 270-272
Technical Documents —
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
