MA-505 11.0592M-C3:ROHS - EPSON ELECTRONICS AMERICA

Seiko Epson Corporation

PROMOTION OF ENVIRONMENTAL MANAGEMENT SYSTEM

CONFORMING TO INTERNATIONAL STANDARDS

At Seiko Epson, all environmental initiatives operate under the

Plan-Do-Check-Action (PDCA) cycle designed to achieve continuous

improvements. The environmental management system (EMS)

operates under the ISO 14001 environmental management standard.

All of our major manufacturing and non-manufacturing sites, in

Japan and overseas, completed the acquisition of ISO 14001

certification.

WORKING FOR HIGH QUALITY

In order provide high quality and reliable products and services

than meet customer needs, Seiko Epson made early efforts towards

obtaining ISO9000 series certification and has acquired ISO9001 for

all business establishments in Japan and abroad. We have also

acquired IATF 16949 certification that is requested strongly by major

automotive manufacturers as standard.

►Explanation of the mark that are using it for the catalog

►Pb free.

►Complies with EU RoHS directive.

*About the products without the Pb-free mark.

Contains Pb in products exempted by EU RoHS directive.

(Contains Pb in sealing glass, high melting temperature type solder or other.)

►Designed for automotive applications such as Car Multimedia, Body Electronics, Remote Keyless Entry etc.

►Designed for automotive applications related to driving safety (Engine Control Unit, Air Bag, ESC etc ).

NOTICE：PLEASE READ CAREFULLY BELOW BEFORE THE USE OF THIS DOCUMENT ©Seiko Epson Corporation 2020

――――――――――――――――――――――――――――――――――――――――――――――――――――

1. The content of this document is subject to change without notice. Before purchasing or using Epson products, please contact with sales

representative of Seiko Epson Corporation (“Epson”) for the latest information and be always sure to check the latest information

published on Epson’s official web sites and resources.

2. This document may not be copied, reproduced, or used for any other purposes, in whole or in part, without Epson’s prior consent.

3. Information provided in this document including, but not limited to application circuits, programs and usage, is for reference purpose only.

Epson makes no guarantees against any infringements or damages to any third parties’ intellectual property rights or any other rights

resulting from the information. This document does not grant you any licenses, any intellectual property rights or any other rights with

respect to Epson products owned by Epson or any third parties.

4. Using Epson products, you shall be responsible for safe design in your products; that is, your hardware, software, and/or systems shall be

designed enough to prevent any critical harm or damages to life, health or property, even if any malfunction or failure might be caused by

Epson products. In designing your products with Epson products, please be sure to check and comply with the latest information

regarding Epson products (including, but not limited to this document, specifications, data sheets, manuals, and Epson’s web site).

Using technical contents such as product data, graphic and chart, and technical information, including programs, algorithms and

application circuit examples under this document, you shall evaluate your products thoroughly both in stand-alone basis and within your

overall systems. You shall be solely responsible for deciding whether to adopt/use Epson products with your products.

5. Epson has prepared this document carefully to be accurate and dependable, but Epson does not guarantee that the information is always

accurate and complete. Epson assumes no responsibility for any damages you incurred due to any misinformation in this document.

6. No dismantling, analysis, reverse engineering, modification, alteration, adaptation, reproduction, etc., of Epson products is allowed.

7. Epson products have been designed, developed and manufactured to be used in general electronic applications and specifically

designated applications (“Anticipated Purpose”). Epson products are NOT intended for any use beyond the Anticipated Purpose that

requires particular quality or extremely high reliability in order to refrain from causing any malfunction or failure leading to critical harm to

life and health, serious property damage, or severe impact on society, including, but not limited to listed below (“Specific Purpose”).

Therefore, you are strongly advised to use Epson products only for the Anticipated Purpose. Should you desire to purchase and use

Epson products for Specific Purpose, Epson makes no warranty and disclaims with respect to Epson products, whether express or

implied, including without limitation any implied warranty of merchantability or fitness for any Specific Purpose. Please be sure to

contact our sales representative in advance, if you desire Epson products for Specific Purpose:

Space equipment (artificial satellites, rockets, etc.)/ Transportation vehicles and their control equipment (automobiles, aircraft, trains,

ships, etc.) / Medical equipment/ Relay equipment to be placed on sea floor/ Power station control equipment / Disaster or crime

prevention equipment/Traffic control equipment/ Financial equipment

Other applications requiring similar levels of reliability as the above

8. Epson products listed in this document and our associated technologies shall not be used in any equipment or systems that laws and

regulations in Japan or any other countries prohibit to manufacture, use or sell. Furthermore, Epson products and our associated

technologies shall not be used for the purposes of military weapons development (e.g. mass destruction weapons), military use, or any

other military applications. If exporting Epson products or our associated technologies, please be sure to comply with the Foreign

Exchange and Foreign Trade Control Act in Japan, Export Administration Regulations in the U.S.A (EAR) and other export-related laws

and regulations in Japan and any other countries and to follow their required procedures.

９. Epson assumes no responsibility for any damages (whether direct or indirect) caused by or in relation with your non-compliance with the

terms and conditions in this document or for any damages (whether direct or indirect) incurred by any third party that you give, transfer or

assign Epson products.

10. For more details or other concerns about this document, please contact our sales representative.

11. Company names and product names listed in this document are trademarks or registered trademarks of their respective companies.

ISO 14000 is an international standard for environmental

management that was established by the International

Standards Organization in 1996 against the background of

growing concern regarding global warming, destruction of

the ozone layer, and global deforestation.

IATF 16949 is the international standard that added the

sector-specific supplemental requirements for automotive

industry based on ISO9001.