LP61L1024
(August, 2002, Version 2.1) 3 AMIC Technology, Inc.
Recommended DC Operating Conditions
(TA = 0°C to + 70°C)
Symbol Parameter Min. Typ. Max. Unit
VCC Supply Voltage 3.0 3.3 3.6 V
GND Ground 0 0 0 V
VIH Input High Voltage 2.2 - VCC + 0.3 V
VIL Input Low Voltage -0.3 0 +0.8 V
CL Output Load - - 30 pF
TTL Output Load - - 1 -
Absolute Maximum Ratings*
VCC to GND .............................................. -0.5V to +7.0V
IN, IN/OUT Volt to GND.....................-0.5V to VCC +0.5V
Operating Temperature, Topr...................... 0°C to +70°C
Storage Temperature, Tstg.....................-55°C to +125°C
Temperature Under Bias, Tbias................-10°C to +85°C
Power Dissipation, Pt................................................1.0W
Soldering Temp. & Time.............................260°C, 10 sec
*Comments
Stresses above those listed under "Absolute Maximum
Ratings" may cause permanent damage to this device.
These are stress ratings only. Functional operation of
this device at these or any other conditions above
those indicated in the operational sections of this
specification is not implied or intended. Exposure to
the absolute maximum rating conditions for extended
periods may affect device reliability.
DC Electrical Characteristics (TA = 0°C to + 70°C, VCC = 3.3V + 10%, GND = 0V)
Symbol Parameter LP61L1024-12/15 Unit Conditions
Min. Max.
ILI Input Leakage Current - 2 µA VIN = GND to VCC
ILO Output Leakage Current - 2 µA CE1 = VIH or CE2 = VIL or
OE = VIH or WE = VIL
VI/O = GND to VCC
ICC1 (1) Dynamic Operating Current - 170 mA CE1 = VIL, CE2 = VIH
II/O = 0 mA
ISB - 30 mA CE1 = VIH or CE2 = VIL
ISB1
Standby Power
Supply Current
- 10 mA CE1 ≥ VCC - 0.2V,
CE2 ≥ VCC - 0.2V,
VIN ≤ 0.2V or VIN ≥ VCC - 0.2V
ISB2 - 10 mA CE1 ≤ 0.2V, CE2 ≤ 0.2V
VIN ≤ 0.2V or VIN ≥ VCC - 0.2V
VOL Output Low Voltage - 0.4 V IOL = 8 mA
VOH Output High Voltage 2.4 - V IOH = -4 mA
Note: 1. ICC1 is dependent on output loading, cycle rates, and Read/Write patterns