MBRB20..CT/MBR20..CT-1 Vishay High Power Products Schottky Rectifier, 2 x 10 A MBRB20..CT FEATURES MBR20..CT-1 * 150 C TJ operation * Center tap D2PAK and TO-262 packages * Low forward voltage drop * High frequency operation Base common cathode 2 Base common cathode 2 * High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance * Guard ring for enhanced ruggedness and long term reliability * Designed and qualified for Q101 level 2 1 Common 3 Anode cathode Anode 2 1 Common 3 Anode cathode Anode D2PAK TO-262 DESCRIPTION This center tap Schottky rectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 150 C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. PRODUCT SUMMARY IF(AV) 2 x 10 A VR 35/45 V MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES IF(AV) Rectangular waveform (per device) 20 IFRM TC = 135 C (per leg) 20 UNITS A 35/45 V IFSM tp = 5 s sine 1060 A VF 10 Apk, TJ = 125 C 0.57 V TJ Range - 65 to 150 C MBRB2035CT MBR2035CT-1 MBRB2045CT MBR2045CT-1 UNITS 35 45 V VRRM VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage Document Number: 93978 Revision: 21-Aug-08 SYMBOL VR VRWM For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 MBRB20..CT/MBR20..CT-1 Vishay High Power Products Schottky Rectifier, 2 x 10 A ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current SYMBOL per leg per device Peak repetitive forward current per leg TEST CONDITIONS Non-repetitive peak surge current TC = 135 C, rated VR IFRM Rated VR, square wave, 20 kHz, TC = 135 C IFSM UNITS 10 IF(AV) 5 s sine or 3 s rect. pulse VALUES 20 Following any rated load condition and with rated VRRM applied Surge applied at rated load conditions halfwave, single phase, 60 Hz A 1060 150 Non-repetitive avalanche energy per leg EAS TJ = 25 C, IAS = 2 A, L = 4 mH 8 mJ Repetitive avalanche current per leg IAR Current decaying linearly to zero in 1 s Frequency limited by TJ maximum VA = 1.5 x VR typical 2 A VALUES UNITS ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 20 A VFM (1) Maximum forward voltage drop TJ = 25 C 10 A TJ = 125 C 20 A Maximum instantaneous reverse current IRM (1) Threshold voltage VF(TO) Forward slope resistance rt TJ = 25 C Rated DC voltage TJ = 125 C TJ = TJ maximum 0.84 0.57 V 0.72 0.1 15 mA 0.354 V 17.6 m Maximum junction capacitance CT VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 C 600 pF Typical series inductance LS Measured from top of terminal to mounting plane 8.0 nH 10 000 V/s VALUES UNITS Maximum voltage rate of change dV/dt Rated VR Note (1) Pulse width < 300 s, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS Maximum junction temperature range TJ - 65 to 150 Maximum storage temperature range TStg - 65 to 175 Maximum thermal resistance, junction to case per leg RthJC DC operation 2.0 Typical thermal resistance, case to heatsink RthCS Mounting surface, smooth and greased (Only for TO-262) 0.50 Approximate weight Mounting torque minimum maximum Non-lubricated threads Case style D2PAK Marking device Case style TO-262 www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com C C/W 2 g 0.07 oz. 6 (5) kgf * cm (lbf * in) 12 (10) MBRB2035CT MBRB2045CT MBR2035CT-1 MBR2045CT-1 Document Number: 93978 Revision: 21-Aug-08 MBRB20..CT/MBR20..CT-1 100 100 TJ = 150 C TJ = 125 C TJ = 25 C 10 1 0.2 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) Schottky Rectifier, 2 x 10 A Vishay High Power Products 10 TJ = 150 C TJ = 125 C 1 TJ = 100 C 0.1 TJ = 75 C TJ = 50 C 0.01 TJ = 25 C 0.001 0.0001 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 1.8 5 10 15 20 25 30 35 40 45 VFM - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) CT - Junction Capacitance (pF) 1000 TJ = 25 C 100 0 10 20 30 40 50 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) 10 1 PDM t1 t2 0.1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Single pulse (thermal resistance) 0.01 0.00001 0.0001 0.001 0.01 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.1 1 10 100 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 93978 Revision: 21-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 MBRB20..CT/MBR20..CT-1 10 150 Average Power Loss (W) Allowable Case Temperature (C) Vishay High Power Products Schottky Rectifier, 2 x 10 A 145 DC 140 135 Square wave (D = 0.50) Rated VR applied 130 125 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 8 RMS limit 6 4 DC 2 See note (1) 0 120 0 3 6 9 12 0 15 2 4 6 8 10 12 14 16 IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) IFSM - Non-Repetitive Surge Current (A) IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (s) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 93978 Revision: 21-Aug-08 MBRB20..CT/MBR20..CT-1 Schottky Rectifier, 2 x 10 A Vishay High Power Products ORDERING INFORMATION TABLE Device code MBR B 20 45 CT -1 TRL - 1 2 3 4 5 6 7 8 1 - 2 - 3 - None = TO-262 6 = -1 Current rating (20 = 20 A) 4 - Voltage ratings 5 - CT = Essential part number 6 7 - Essential part number B = D2PAK 6 None None = D2PAK 2 = B -1 = TO-262 2 None 35 = 35 V 45 = 45 V None = Tube (50 pieces) TRL = Tape and reel (left oriented - for D2PAK only) TRR = Tape and reel (right oriented - for D2PAK only) 8 - None = Standard production PbF = Lead (Pb)-free (for TO-262 and D2PAK tube) P = Lead (Pb)-free (for D2PAK TRR and TRL) LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95014 Part marking information http://www.vishay.com/doc?95008 Packaging information http://www.vishay.com/doc?95032 Document Number: 93978 Revision: 21-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1