0603 Thick Film Chip Resistor
Standard Grade, Wraparound
GLASS
PASSIVATION
WRAPAROUND
TERMINATIONS 96% ALUMINA CHIP
RESISTOR
FILM
02/08/08
PERFORMANCE CHARACTERISTICSPERFORMANCE CHARACTERISTICS
LIFE TEST POWER DERATING
MECHANICAL
Length
Width
Thickness
Top Term
Bottom Term
Gap
Approx. Weight
Length
Width
Thickness
Top Term
Bottom Term
Gap
Approx. Weight
.062 (.060 - .070)
.032 (.030 - .037)
.018 (.013 - .023)
.010 (.007 - .017)
.014 (.010 - .020)
.034 (.030 - .038)
.00235 grams
.062 (.060 - .070)
.032 (.030 - .037)
.018 (.013 - .023)
.010 (.007 - .017)
.014 (.010 - .020)
.034 (.030 - .038)
.00235 grams
1.58 (1.52 - 1.78)
0.81 (0.76 - 0.94)
0.46 (0.33 - 0.58)
0.25 (0.18 - 0.43)
0.36 (0.25 - 0.51)
0.86 (0.76 - 0.97)
1.58 (1.52 - 1.78)
0.81 (0.76 - 0.94)
0.46 (0.33 - 0.58)
0.25 (0.18 - 0.43)
0.36 (0.25 - 0.51)
0.86 (0.76 - 0.97)
PART NUMBERING
MINIMUM
RECOMMENDED
MOUNTING
PADS
(INCHES)
MINIMUM
RECOMMENDED
MOUNTING
PADS
(INCHES)
.092
.034
.030
INCHES MILLIMETERSINCHES MILLIMETERS
(1)+/- 0.5% limited availability(1)+/- 0.5% limited availability
.031
POWER DISSIPATION
TEMPERATURE RISE (°C)
POWER DISSIPATION (WATTS)
fiber epoxy board
ceramic board
“Specifications subject to change without notice.”“Specifications subject to change without notice.”
Resistance Range
Tolerances (1)
TCR
Thermal Resistance
Maximum Power
Maximum Voltage
Resistance Range
Tolerances (1)
TCR
Thermal Resistance
Maximum Power
Maximum Voltage
1W-40 WM
±100, ±200, ±300 ppm
0.5%,1%, 2%, 5%,10%
78.4°C/W
100 mW
45 Volts
1W-40 WM
±100, ±200, ±300 ppm
0.5%,1%, 2%, 5%,10%
78.4°C/W
100 mW
45 Volts
ENVIRONMENTAL PERFORMANCE (2)ENVIRONMENTAL PERFORMANCE (2)
±0.03%
±0.03%
±0.03%
±0.03%
±0.05%
±0.05%
See Chart
±0.03%
±0.03%
±0.03%
±0.03%
±0.05%
±0.05%
See Chart
Thermal Shock
Low Temperature Operation
Short-time Overload
Resistance to Bonding Exposure
Moisture Resistance
High Temperature Exposure
Life Test
Thermal Shock
Low Temperature Operation
Short-time Overload
Resistance to Bonding Exposure
Moisture Resistance
High Temperature Exposure
Life Test
(2)Typical resistance change, test methods and criteria
per MIL-PRF-55342.
(2)Typical resistance change, test methods and criteria
per MIL-PRF-55342.
S0603CPX150J 20-TRS 0603 C PX150 J 20 - TR
RESISTANCE VALUE:
Four digits are used for tolerances of 1% or lower, three digits are used above 1%. Leading digits are significant while the last digit
specifies the number of zeros to add. The letter "R" is used to represent the decimal for fractional ohmic values. Example: 5R6 is 5.6
ohms.
RESISTANCE VALUE:
Four digits are used for tolerances of 1% or lower, three digits are used above 1%. Leading digits are significant while the last digit
specifies the number of zeros to add. The letter "R" is used to represent the decimal for fractional ohmic values. Example: 5R6 is 5.6
ohms.
SIZE CODESIZE CODE
GRADE: S: Standard Production H: High Reliability (For Screening options, contact the factory)GRADE: S: Standard Production H: High Reliability (For Screening options, contact the factory)
PRODUCT DESIGNATION: P: Thick film on alumina U: Untrimmed alumina (10% & 20% tolerance only)PRODUCT DESIGNATION: P: Thick film on alumina U: Untrimmed alumina (10% & 20% tolerance only)
TERMINATION TYPE: C: Wraparound terminationTERMINATION TYPE: C: Wraparound termination
TEMPERATURE CHARACTERISTIC: 10: ±100 ppm 20: ±200 ppm 30: ±300 ppmTEMPERATURE CHARACTERISTIC: 10: ±100 ppm 20: ±200 ppm 30: ±300 ppm
TOLERANCE: F: 1% G: 2% J: 5% K: 10% M: 20%TOLERANCE: F: 1% G: 2% J: 5% K: 10% M: 20%
TERMINATION FINISH: X: Sn60 over Nickel (Solderable) C: Silver bearing (Epoxy bondable-RoHS) G: Gold (Epoxy bondable-RoHS)
Y: Silver over Nickel (Solderable -RoHS) Z: Gold over Nickel (Solderable-RoHS)
TERMINATION FINISH: X: Sn60 over Nickel (Solderable) C: Silver bearing (Epoxy bondable-RoHS) G: Gold (Epoxy bondable-RoHS)
Y: Silver over Nickel (Solderable -RoHS) Z: Gold over Nickel (Solderable-RoHS)
PACKAGING CODE: - TR = Tape/Reel -W=WaffleCarrier (Default packaging is Bulk)PACKAGING CODE: -TR= Tape/Reel - W = Waffle Carrier (Default packaging is Bulk)
STATE OF THE ART, INC.STATE OF THE ART, INC. 2470 Fox Hill Road, State College, PA 16803-17972470 Fox Hill Road, State College, PA 16803-1797
Phone (814) 355-8004 Fax (814) 355-2714Phone (814) 355-8004 Fax (814) 355-2714 Toll Free 1-800-458-3401Toll Free 1-800-458-3401
www.resistor.com
